Expert Advice


Australia Wide

A Very Good Upgrade from The Original Speakers in Your Car!


Performance Series 2-Way Coaxial Speaker

Acoustic system size of 13 cm, usually placed in a regular place in the dashboard, the door at the regular places or at the rear. These speakers will most likely work on car, but if the system is to use an external amplifier, you should pay attention to the power of the speakers. When selecting trinadtsatisantimetrovoy acoustics do not expect it any super bass, but when properly installed to achieve good average bass vpolnerealno.

I recommend to pay attention to the resistance of acoustics: car for it must not be less than 3 ohms, for external power amplifiers can be lower, but be sure to match the characteristics of the amplifier. It is not necessary to look at the frequency response of the speakers DLS M225 – is often a fantastic these parameters, which are rarely true, an exception – a serious global brands with more than ten years’ standing.

Car speakers to choose the size of the magnet, it is not necessary. If the magnet is large, it does not mean that the speaker will sound good. In the high-end and high-end models Acoustics neodymium magnet is used, which is very small in size and it is very effective. Much more important than what is on the front of the speaker. This diffuser and suspension.

The best option for manufacturing these components: for diffuser paper or pressboard with a mandatory water-repellent (Car speakers DLS M225 usually operates in harsh environments and must be protected as much as possible), for suspension of the diffuser – soft rubber or rubber, but in any case, not a rag.

Built-in tweeter speakers can be silk or metal. The debate about which one is better – as old as the world. In general, both solutions are acceptable, then you should choose a start from his ear and style of music that will be heard. In metal tweeters higher, pronounced sound in a more transparent cloth and down the wide frequency response.

A very good sign coaxial speakers in the car – the presence of an external crossover. The more detail in it, the higher the order, and better quality, but it suffers greatly damping factor, that for systems with an amplifier is not critical, but if the acoustics of the car running – can be very sensitive.

But, whatever you say, the most important thing in acoustics – its sound. Properly assess the dynamics of DLS M225 can only be setting them “on the mind,” Mash (to work 15-20 hours) and listening. Since put into store established dynamics after operation without the presence of a defect and not only because of the pleasant sound unrealistic, it can only rely on a fair and independent opinion of an experienced dealer or installer.

And the most basic acoustics DLS M225 – how you install it. Remember that even the most expensive and high-quality speaker without acoustic design will not sound. To hear the sound, acoustics must be installed in the acoustic volume. In the vast majority of vehicles this volume as built – that tin in terms of acoustics. For example, to the speaker sounded at the door of the car it should be noise-vibration isolated, preferably in two layers and fix the speaker not to the metal, and in a wooden lantern made of MDF or plywood with protection against moisture.

Only then your car will sound. It is also very important not to confuse the polarity when connecting the speakers, as this will lead to a complete lack of bass due to the fact that the speakers will work in the opposite and cancel each other. Reversal when connecting tweeters lead to an incorrect location of the scene in a car.


  • Woofer Size: 13cm (5.25″)
  • Tweeter: 16mm (0.63″) Mylar
  • Power Handling Capacity:
    • RMS: 50W
    • Max: 75W
    • Peak: 150W
  • Impedance: 4-Ohm
  • Frequency Range: 75 – 18,000Hz
  • Sensitivity: 85dB (1W/1m)
  • Crossover: Cable Filter With 6/12 dB Slope (LP/HP)
  • Woofer Outer Diameter: 130mm (5.12″)
  • Magnet Size: 80mm (3.15″)
  • Mounting Depth: 43mm (1.7″)
  • Mounting Hole: 120mm (4.72″)
  • Weight: 1.00kg


Legendary Product & Support From Authorised Dealers

You’ve decided to buy DLS Audio. That means quality and performance are important to you, so who you buy your new DLS Audio gear from is just as important. Here are a few reasons to purchase from an authorised dealer and here is why.


Proper Training: Only authorised DLS Audio dealers are factory trained to sell and install DLS Audio products. They know DLS Audio products and your vehicle to ensure that your new purchase exceeds your expectations!


Authorized Warranty: DLS Audio provides one of the best warranties in the business. Only customers purchasing through authorised dealers receive this comprehensive company warranty. Don’t be fooled by others who promise a full warranty, because it’s simply not true.


Support: if you have an issue you are covered by DLS Audio Australia’s manufactures warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas, its all done right here.


Protect Your Investment: Protect yourself and your investment by making sure you buy your DLS Audio product from us an online dealer who is part of the DLS Audio family, Ask yourself is it worth saving a few dollars not to be covered?!

Weight 1 kg




There are no reviews yet.

Be the first to review “DLS Audio DLS-M225 5.25″ 150W Performance Series 2-Way Coaxial Speaker – Pair”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Shopping cart
Sign in

No account yet?

Create an Account
Product Categories

DLS Audio DLS-M225 5.25″ 150W Performance Series 2-Way Coaxial Speaker – Pair

Rated 0 out of 5

Out of stock