DNA RCH160 CCD Reverse Camera & Harness Kit To Suit Toyota Hilux 2020 – Onwards

Designed for Plug-N’-Play DIY Installation in Toyota Hilux Vehicles 2020 Onwards DNA Reverse Camera KitIt allows easy installation and integration of a reverse camera to the OEM factory Toyota Hilux screen. (From June 2020 onwards, refer to photo of the OEM Toyota head unit as a reference). The camera is then simply mounted in the factory location or under the tray. This kit has been designed for simple plug and play installation into the Toyota Hilux vehicle, without the need of cutting or soldering any wires. It saves pulling apart the dash and trying to access the rear of the head unit area, whereas this harness simply plugs and plays into the harness location in the passenger footwell kick panel area. Quick Installation PointsGaining Access to The Harness Wiring in The Vehicle: 1. Lift up & remove the passenger side door sill plate.2. Remove the passenger side footwell kick panel. Installing the Camera Harness with The Vehicle Harness Wiring: (Warning: Ensure vehicle is switched off before disconnecting this plug) A. Unplug the factory harness plug from the passenger side footwell area.B. Plug the factory harness plug into the female end of this harness.C. Plug the male end of this harness into the factory harness socket in the vehicle.D. Plug the small 4 Pin plug on the camera extension cable into the small 4 Pin socket on the harness Installing the Camera & Testing: 3. Install and wire the camera as desired.4. Once this camera kit is installed, test it to make sure it is working & the viewing angle is suitable.5. Ensure all wiring is routed in the vehicle and to the rear of the vehicle safely and securely.6. Re-install the passenger side footwell kick panel.7. Re-install the passenger side door sill plate. Features: Heavy Duty Robust Design Parking Guide Lines (Green & Black wires): By default is set without parking guide lines. (Join green and black wire to turn on parking guide lines) Camera also includes butterfly mount and has a Waterproof IP68 rating Plug and play DIY installation with harness Specifications: Image Sensor: CCD Video System: NTSC Resolution: 340K Pixels Min Illumination: 0.5Lux View Angle: 160° Working Voltage: DC5V-12V Waterproof Rating: IP68 Camera Body Size: 26mm W x 21mm H x 30mm D Butterfly Base Size: 35mm L x 19mm W Packaging: DNA Gift Box with Sticker Package Contains: 1 x CCD Camera 1 x 7 Metre Camera Extension Cable 1 x Plug & Play Harness (1 x Male 26 Pin Plug to 1 x Female 26 Pin Plug & 1 x 4 Pin Plug) 1 x Installation Instruction Also available is just the video retention harness only: VRTY20