Oricom UHF180F 80 Channel 5 Watt Slimline UHF CB Radio

The Perfect Solution for Vehicles with a Lack of Space in the Cabin The 5-Watt operation, heavy duty microphone, tri colour backlit LCD display and typically rugged Oricom chassis construction help to make the Korean engineered masterpiece a clever solution to staying connected on and off the road. Features: Slimline transceiver 80 channels* 5 Watts (max TX power) Heavy duty microphone with volume and channel control Wideband scanner (400 – 512MHz) 8500+ Receive frequencies 200 user programmable receive only channels 5 digit Selcall ID with alpha display 38 CTCSS and 104 DCS codes Tri colour backlit LCD display (Amber/Red/Green) Duplex* (range extender) Priority channel Open/instant/priority scan Digital squelch control Rotary channel and volume control 3.5mm external speaker jack Rugged chassis construction with integrated heat sink Requires antenna (not supplied). Designed and engineered in Korea. *This 80 channel narrow band radio has a total of 75 usable voice channels Channels 22 and 23 are used for Telemetry and Telecommand, voice communications are not allowed on these channels.Channels 61,62 and 63 are guard channels and are not available for use. Specifications: Compliance: AS/NZS 4365:2011 Frequency Range TX/RX: 476.425 – 477.4125 MHz Number of TX/RX Channels: 80 UHF CB Channel Spacing TX/RX: 12.5KHz Operating modes: Simplex, Repeater TX offset (+750kHz) Scanning Speed: 130 msec per channel Antenna Impedance: 50 Ohms Operating Volts nominal: 13.8VDC Operating Volts Range: 10 to 15 VDC Over Voltage Protection: Diode and voltage regulator Over Current Protection: 2 AMP fuse Reverse Polarity Protection: Shunt diode Frequency stability: +/- 5 ppm TRANSMITTER RF Output Power Nominal: 5 watts Modulation: F3E(FM) Maximum deviation: 2.5KHz Spurious Emissions: <-30dBm TX Audio pre-emphasis: +6dB/Octave from 300Hz to 3KHz Current consumption during TX: 1.6AMP with 50 ohm antenna termination RECEIVER Circuit Type Dual conversion: super heterodyne Intermediate Frequencies: 1st IF = 30.85MHz , 2nd IF = 450kHz Maximum usable sensitivity: > -123dBm at 12dB SINAD Audio output power: 3 Watts Maximum RX Audio de-emphasis: -6dB/octave 300Hz to 3kHz