Victron Energy BPC122547016 Blue Smart IP67 Charger 12/25(1) 230V

The Blue Smart Ip67 Waterproof Charger Is The New Professional Battery Charger With Built-in Bluetooth

. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper vans.

Recovery Function for Fully Discharged Batteries:

Most reverse polarity-protected chargers will not recognize, and therefore not recharge a battery that has been discharged to zero or nearly zero Volts. The Blue Smart Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.

The Battery is Charged, Smartly and to Perfect Condition:

The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, and ensures better performance… and a longer life.

Bluetooth Smart Enabled:

The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, change settings and update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.

Completely Encapsulated: Waterproof, Shockproof and Ignition Protected:

Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are molded in resin.

The Highest Efficiency Ever:

Setting a new industry standard: With 92% efficiency or better, these chargers waste three to four times less heat. Once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.

Adaptive 5-stage Charge Algorithm: Bulk – Absorption – Recondition – Float – Storage

The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.

Storage Mode: Less Maintenance and Ageing When the Battery is Not in Use:

The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Also Charges Li-ion (LiFePO₄) Batteries:

LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.

Protected Against Overheating:

Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.

Two LEDs for Status Indication:

Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on

Features:

• Smart Charger
• Built-in Bluetooth
• Suitable for Lithium Batteries
• Cabling & Quick Fit Connectors Included
• Multi-Stage Charging
• Recovery of Fully Discharged Batteries
• Battery Reconditioning
• Waterproof

Legendary Products & Support From Authorised Dealers

You’ve decided to buy Victron Energy. That means quality and performance are important to you, so who you buy your new Victron Energy gear from is just as important. Here are a few reasons to purchase from an authorised dealer and here is why.

Proper Training: Only authorised Victron Energy dealers are factory-trained to sell and install Victron Energy products. They know Victron Energy products and your vehicle to ensure that your new purchase exceeds your expectations!

Authorized Warranty: Victron Energy provides one of the best warranties in the business. Only customers purchasing through authorised dealers receive this comprehensive company warranty. Don’t be fooled by others who promise a full warranty, because it’s simply not true.

Support: If you have an issue, you are covered by Victron Energy Australia’s manufacturer warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas. It’s all done right here.

Protect Your Investment: Protect yourself and your investment by making sure you buy your Victron Energy product from us, an online dealer who is part of the Victron Energy family. Ask yourself, is it worth saving a few dollars not to be covered?!