JL Audio JLA-010-03916-00 M6 10" Marine Subwoofer - White Luxe Grille Premium marine bass reproduction with ultra-low-profile luxury design — M6 Luxe 10" subwoofer delivers extreme low-frequency output with sophisticated near-flush aesthetics for Australian offshore conditions. Product Overview The JL Audio M6 10" marine subwoofer with white luxe grille delivers reference-grade bass reproduction with ultra-low-profile premium design in a corrosion-resistant package for infinite baffle or enclosed installations. Engineered with injection-moulded mica-filled polypropylene cone and 13mm linear excursion capability, this marine subwoofer handles 250W RMS continuous power with dual sensitivity ratings (86.1 dB for infinite baffle, 86.4 dB for enclosed configurations). The white luxe grille with only 14mm frontal protrusion delivers sophisticated near-flush mounting aesthetics ideal for premium yacht interiors and luxury vessel installations where traditional subwoofer profiles compromise design integrity while providing extreme bass extension and high output capability for demanding marine audio systems. Features & Benefits Ultra-Low-Profile Luxe Grille Design: Premium white luxe finish with only 14mm frontal protrusion (vs 42mm for Classic/Sport models) provides sophisticated near-flush mounting aesthetics ideal for premium yacht interiors, luxury cruiser installations, and high-end vessel applications where traditional subwoofer profiles compromise design integrity and premium aesthetic requirements. Dual-Configuration Versatility: Engineered for both infinite baffle (free-air) and enclosed (sealed/ported box) installations with optimized Thiele-Small parameters (IB: Qts 0.840, W: Qts 0.496), enabling flexible mounting options including under-seat locations, bulkhead installations, or custom enclosures matching available space constraints in diverse vessel configurations. 250W RMS Power Handling: Robust thermal management and heavy-duty voice coil construction supports continuous 250W power with recommended amplifier range of 75-250W, enabling extreme bass output levels critical for large vessels, outdoor marine environments, and competition-grade installations requiring chest-thumping low-frequency impact. 13mm Linear Excursion: Generous Xmax specification (13mm one-way) provides exceptional cone travel capability enabling high output levels without distortion, critical for reproducing deep bass frequencies in demanding marine environments where wind, engine noise, and water splash require substantial acoustic output for clarity. Mica-Filled Polypropylene Cone: Advanced injection-moulded cone material delivers exceptional rigidity, controlled damping characteristics, and superior moisture resistance compared to paper or treated fabric cones, ensuring consistent bass performance in high-humidity marine environments with temperature fluctuations and continuous vibration exposure. Marine-Grade Corrosion Protection: Fully marinized construction with UV-resistant materials, sealed motor structures, and corrosion-resistant hardware provides reliable long-term performance in harsh saltwater environments including coastal cruising, offshore fishing, and tropical marine conditions with sustained exposure to spray and humidity. Optimized Enclosure Specifications: Factory-engineered sealed and ported enclosure recommendations eliminate guesswork, with IB sealed configuration (70.8L, F3: 41.54 Hz) for maximum output or W sealed configuration (21.2L, F3: 50.08 Hz) for space-constrained installations, plus ported options achieving F3 down to 25.09 Hz for extreme bass extension. Low-Frequency Extension: Dual sensitivity ratings (86.1 dB IB, 86.4 dB W) and optimized parameters enable bass reproduction down to 25-31 Hz in ported configurations or 41-50 Hz in sealed enclosures, providing deep sub-bass impact approaching dedicated home theater subwoofer performance in marine environments. Included Grille Removal Tool: Luxe models include dedicated grille removal tool enabling clean grille extraction for maintenance or aesthetic preference changes without damaging premium finish or mounting surfaces, essential for maintaining luxury appearance standards during service intervals. 4-Ohm Nominal Impedance: Standard impedance rating ensures broad compatibility with marine amplifiers and multi-subwoofer configurations while maintaining stable load characteristics during extended operation in varying temperature conditions and demanding marine environments. Technical Specs Specification Value Subwoofer Type Infinite baffle or enclosed-use marine subwoofer Woofer Size 254mm (10") Continuous Power Handling 250W RMS Recommended Amplifier Power 75-250W Nominal Impedance 4Ω Sensitivity (Infinite Baffle) 86.1 dB (1W/1m) Sensitivity (Enclosed) 86.4 dB (1W/1m) Frequency Response (IB Sealed) 41.54 Hz F3 cutoff Frequency Response (W Sealed) 50.08 Hz F3 cutoff Frequency Response (IB Ported) 25.09 Hz F3 cutoff Frequency Response (W Ported) 29.81 Hz F3 cutoff Linear Excursion (Xmax) 13mm (0.52") one-way Free Air Resonance (Fs) IB 43.76 Hz Free Air Resonance (Fs) W 34.58 Hz Total Q (Qts) IB 0.840 Total Q (Qts) W 0.496 Equivalent Volume (Vas) IB 27.75 L Equivalent Volume (Vas) W 34.49 L Overall Diameter 260mm (10.25") for luxe Mounting Depth 192mm (7.56") Mounting Depth Clearance Required 177mm (6.98") Frontal Grille Protrusion 14mm (0.55") ultra-low-profile Mounting Hole Diameter 268mm (10.5625") Bolt Hole Circle 291mm (11.46") Driver Displacement 2.80 L (0.099 cu ft) Cone Material Injection-moulded mica-filled polypropylene Grille Colour White luxe finish Grille Style Luxe (ultra-low-profile) LED Lighting Not available on luxe models Subwoofer Connection Spade connectors Mounting Hardware Stainless steel screws and washers included Accessories Included Grille removal tool Weight 6.0 kg (13.2 lbs) Quantity Single subwoofer Warranty Period 2 years Part Number JLA-010-03916-00 Compatible With / Goes Well With JL Audio M6 marine speakers (6.5", 7.7", 8.8") JL Audio M6 enclosed tower speakers JL Audio MHD marine amplifiers JL Audio MVi marine amplifiers JL Audio MX marine and powersports amplifiers JL Audio XDM car and marine amplifiers JL Audio VeX enclosed systems Fusion Apollo MS-RA800 marine stereo Premium yachts with 268mm subwoofer cutouts Luxury cruiser installations requiring near-flush mounting High-end helm station integrations Superyacht interior applications Custom yacht audio systems with architectural integration Luxury vessel refits requiring sophisticated aesthetics Caution: Verify mounting depth clearance (177mm minimum) and mounting hole diameter (268mm) before installation. Luxe models require SIGNIFICANTLY LARGER cutouts than standard Classic/Sport subwoofers (268mm vs 225mm). Luxe 10" models also require MORE depth clearance (177mm vs 150mm). Subwoofer requires dedicated amplifier power—do NOT connect to head unit speaker outputs. Luxe models do not feature LED lighting. Infinite baffle installations require adequate backside volume. Enclosed installations require properly constructed sealed or ported enclosures matching JL Audio specifications. Frequently Asked Questions Does this subwoofer come as a pair or individually? This is sold as a SINGLE subwoofer for flexible installation configurations. Marine subwoofers are typically sold individually as many installations use one centrally-located unit. Order multiple units for dual-subwoofer configurations in larger vessels or high-output systems. Will this Luxe subwoofer fit standard 10" marine subwoofer cutouts? No, Luxe models require 268mm mounting holes compared to 225mm for standard Classic/Sport 10" models. You'll need significantly larger cutouts specifically designed for Luxe series subwoofers. This is the largest cutout requirement in the entire M6 subwoofer line. What's the advantage of Luxe models over Classic/Sport subwoofers? Luxe series features ultra-low-profile grille with only 14mm protrusion (vs 42mm for Classic/Sport), providing near-flush mounting appearance ideal for premium yacht interiors and luxury vessel installations requiring sophisticated aesthetic integration. The trade-off is significantly larger cutout requirements and no LED lighting option. What size enclosure is required for this subwoofer? For sealed enclosures: IB configuration requires 70.8L net internal volume, W configuration requires 21.2L. For ported enclosures: IB requires 70.8L with 102mm diameter port (305mm length), W requires 56.6L with 76mm port (283mm length). See complete specifications in documentation. What's the difference between infinite baffle and enclosed configurations? Infinite baffle (free-air) mounts the subwoofer directly to a bulkhead or panel without an enclosure, requiring adequate backside airspace. Enclosed configurations use sealed or ported boxes with specific internal volumes. IB provides simpler installation, while enclosed offers deeper bass extension and more control over response characteristics.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

JL Audio JLA-010-03084-00 M6 10" Marine Subwoofer - White Sport Grille Premium marine bass reproduction with performance styling — M6 10" subwoofer delivers extreme low-frequency output with aggressive aesthetics and versatile mounting for Australian offshore conditions. Product Overview The JL Audio M6 10" marine subwoofer with white sport grille delivers reference-grade bass reproduction in a corrosion-resistant package with performance styling for infinite baffle or enclosed installations. Engineered with injection-moulded mica-filled polypropylene cone and 13mm linear excursion capability, this marine subwoofer handles 250W RMS continuous power with dual sensitivity ratings (86.1 dB for infinite baffle, 86.4 dB for enclosed configurations). The 10" format provides deep bass extension and high output capability for large vessels, multi-zone systems, and high-performance marine audio installations requiring dedicated low-frequency reinforcement with aggressive white sport aesthetics ideal for fishing boats, recreational vessels, and performance craft installations. Features & Benefits Dual-Configuration Versatility: Engineered for both infinite baffle (free-air) and enclosed (sealed/ported box) installations with optimized Thiele-Small parameters (IB: Qts 0.840, W: Qts 0.496), enabling flexible mounting options including under-seat locations, bulkhead installations, or custom enclosures matching available space constraints in diverse vessel configurations. 250W RMS Power Handling: Robust thermal management and heavy-duty voice coil construction supports continuous 250W power with recommended amplifier range of 75-250W, enabling extreme bass output levels critical for large vessels, outdoor marine environments, and competition-grade installations requiring chest-thumping low-frequency impact. 13mm Linear Excursion: Generous Xmax specification (13mm one-way) provides exceptional cone travel capability enabling high output levels without distortion, critical for reproducing deep bass frequencies in demanding marine environments where wind, engine noise, and water splash require substantial acoustic output for clarity. Sport Grille Styling: Aggressive white sport grille design provides bold aesthetic presence and enhanced driver protection compared to classic models, ideal for performance-oriented vessels, fishing boats, and recreational craft requiring durable marine audio with contemporary visual impact without LED components. Mica-Filled Polypropylene Cone: Advanced injection-moulded cone material delivers exceptional rigidity, controlled damping characteristics, and superior moisture resistance compared to paper or treated fabric cones, ensuring consistent bass performance in high-humidity marine environments with temperature fluctuations and continuous vibration exposure. Marine-Grade Corrosion Protection: Fully marinized construction with UV-resistant materials, sealed motor structures, and corrosion-resistant hardware provides reliable long-term performance in harsh saltwater environments including coastal cruising, offshore fishing, and tropical marine conditions with sustained exposure to spray and humidity. Optimized Enclosure Specifications: Factory-engineered sealed and ported enclosure recommendations eliminate guesswork, with IB sealed configuration (70.8L, F3: 41.54 Hz) for maximum output or W sealed configuration (21.2L, F3: 50.08 Hz) for space-constrained installations, plus ported options achieving F3 down to 25.09 Hz for extreme bass extension. Low-Frequency Extension: Dual sensitivity ratings (86.1 dB IB, 86.4 dB W) and optimized parameters enable bass reproduction down to 25-31 Hz in ported configurations or 41-50 Hz in sealed enclosures, providing deep sub-bass impact approaching dedicated home theater subwoofer performance in marine environments. Simplified Installation: Sport grille design without LED components reduces installation complexity compared to LED-equipped models, eliminating additional wiring requirements and LED current draw concerns while maintaining aggressive white sport aesthetics and reference-grade bass performance ideal for straightforward upgrades or retrofit installations. 4-Ohm Nominal Impedance: Standard impedance rating ensures broad compatibility with marine amplifiers and multi-subwoofer configurations while maintaining stable load characteristics during extended operation in varying temperature conditions and demanding marine environments. Technical Specs Specification Value Subwoofer Type Infinite baffle or enclosed-use marine subwoofer Woofer Size 254mm (10") Continuous Power Handling 250W RMS Recommended Amplifier Power 75-250W Nominal Impedance 4Ω Sensitivity (Infinite Baffle) 86.1 dB (1W/1m) Sensitivity (Enclosed) 86.4 dB (1W/1m) Frequency Response (IB Sealed) 41.54 Hz F3 cutoff Frequency Response (W Sealed) 50.08 Hz F3 cutoff Frequency Response (IB Ported) 25.09 Hz F3 cutoff Frequency Response (W Ported) 29.81 Hz F3 cutoff Linear Excursion (Xmax) 13mm (0.52") one-way Free Air Resonance (Fs) IB 43.76 Hz Free Air Resonance (Fs) W 34.58 Hz Total Q (Qts) IB 0.840 Total Q (Qts) W 0.496 Equivalent Volume (Vas) IB 27.75 L Equivalent Volume (Vas) W 34.49 L Overall Diameter 273mm (10.75") Mounting Depth 192mm (7.56") Mounting Depth Clearance Required 150mm (5.90") Frontal Grille Protrusion 42mm (1.66") Mounting Hole Diameter 225mm (8.875") Bolt Hole Circle 247mm (9.70") Driver Displacement 1.47 L (0.052 cu ft) Cone Material Injection-moulded mica-filled polypropylene Grille Colour White sport finish Grille Style Sport (performance styling) LED Lighting No Subwoofer Connection Spade connectors Mounting Hardware Stainless steel screws and washers included Weight 5.70 kg (12.60 lbs) Quantity Single subwoofer Warranty Period 2 years Part Number JLA-010-03084-00 Compatible With / Goes Well With JL Audio M6 marine speakers (6.5", 7.7", 8.8") JL Audio M6 enclosed tower speakers JL Audio MHD marine amplifiers JL Audio MVi marine amplifiers JL Audio MX marine and powersports amplifiers JL Audio XDM car and marine amplifiers JL Audio VeX enclosed systems Fusion Apollo MS-RA800 marine stereo Fishing boats requiring dedicated bass Performance boats with high-power systems Recreational vessels with white trim Centre console fishing boats Bay boats with cockpit audio Bowriders with sport styling Wake boats and ski boats Caution: Verify mounting depth clearance (150mm minimum) and mounting hole diameter (225mm) before installation. Subwoofer requires dedicated amplifier power—do NOT connect to head unit speaker outputs. This Sport model does NOT include LED lighting functionality. Infinite baffle installations require adequate backside volume. Enclosed installations require properly constructed sealed or ported enclosures matching JL Audio specifications. For LED-equipped white sport subwoofer, see part number JLA-010-03085-00. Frequently Asked Questions What's the difference between this model and JLA-010-03085-00? This model (JLA-010-03084-00) features white sport grille WITHOUT LED lighting, offering simpler installation and lower cost. Model JLA-010-03085-00 includes Transflective™ LED lighting with multi-colour illumination requiring additional wiring and 594mA current draw. Both share identical audio specifications and white sport styling. What's the difference between infinite baffle and enclosed configurations? Infinite baffle (free-air) mounts the subwoofer directly to a bulkhead or panel without an enclosure, requiring adequate backside airspace. Enclosed configurations use sealed or ported boxes with specific internal volumes. IB provides simpler installation, while enclosed offers deeper bass extension and more control over response characteristics. Does this subwoofer come as a pair or individually? This is sold as a SINGLE subwoofer. Marine subwoofers are typically sold individually as many installations use one centrally-located unit. Order multiple units for dual-subwoofer configurations in larger vessels or high-output systems. Will this Sport subwoofer fit the same cutouts as Classic models? Yes, Sport and Classic 10" models share identical mounting dimensions (225mm mounting hole, 247mm bolt circle, 150mm clearance). The main difference is Sport models have more aggressive styling compared to traditional Classic grilles, with Sport grilles typically being the same depth as Classic. What size enclosure is required for this subwoofer? For sealed enclosures: IB configuration requires 70.8L net internal volume, W configuration requires 21.2L. For ported enclosures: IB requires 70.8L with 102mm diameter port (305mm length), W requires 56.6L with 76mm port (283mm length). See complete specifications in documentation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Wind, Water or Engine Noise Will Not Drown Them OutInfinity's Kappa Marine loudspeakers leverage Infinity's world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity‚Äîready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.Plus One™ Woofer ConesPlus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.Convertible DesignTo increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.Perimeter IlluminationUnique and eye-catching RGB illumination can display seven colors out of the box‚Äîor an almost unlimited number of colors when connected to an external lighting controller.SSI (Switch-Selectable Impedance)New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)Mylar Tweeters with Integrated GrillesWeather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)One-piece Polymer basketThe polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.High SensitivityA high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.Voicing of SpeakersSpeakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.Harman Standard Reliability TestingInfinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.Infinity at an Affordable PriceThis is Infinity‚Äîone of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world‚Äîobviously, this is no coincidence. If you know audio, you know Infinity in your car, your home‚Äîwhy not in your boat?Features: Power Handling 300 watts RMS, 900 watts peak power Sensitivity 89dB at 2.83 volts Frequency Response 20 - 2KHz Voice Coil Diameter 2 in. (49.5mm) Impedance 2 and 4-ohms, Switch Selectable Impedance (SSI™) What's In the Box: 10" (250mm), ea. with integrated grille 6 x Screw 6 x Speed clip 1 x Spanner 1 x Closed cell foam gasket 1 x LED cable 1 x Owner's Manual 1 x RoHS sheet Legendary Products & Support From Authorized Dealers When you choose Infinity, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Infinity dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Infinity's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Infinity dealer today!

Read more less

Wind, Water or Engine Noise Will Not Drown Them Out   Infinity's Kappa Marine loudspeakers leverage Infinity's world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity‚Äîready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.   Plus One™ Woofer ConesPlus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character. Convertible DesignTo increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions. Perimeter IlluminationUnique and eye-catching RGB illumination can display seven colors out of the box‚Äîor an almost unlimited number of colors when connected to an external lighting controller. SSI (Switch-Selectable Impedance)New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.) Mylar Tweeters with Integrated GrillesWeather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.) One-piece Polymer BasketThe polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection. High SensitivityA high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character. Voicing of SpeakersSpeakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point. Harman Standard Reliability TestingInfinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time. Infinity at an Affordable PriceThis is Infinity‚Äîone of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world‚Äîobviously, this is no coincidence. If you know audio, you know Infinity in your car, your home‚Äîwhy not in your boat? Legendary Products & Support From Authorized Dealers When you choose Infinity, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Infinity dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Infinity's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Infinity dealer today!

Read more less

Rockford Fosgate Prime 10" Dual 2-Ohm Subwoofer - Black: Designed with Weatherproofing Technology The RM110D2B is a black 10‚Äù Prime R1 subwoofer designed for marine watercraft or powersports applications. It features color matched grille and is UV and moisture resistant. Can be used in sealed, vented or infinite baffle installations. The RM110D2B is a black 10‚Äù subwoofer designed with weatherproofing technology specific for use in marine watercraft or powersports applications. It features a color molded grille that is 100% UV stable. This model can be used in sealed, vented or infinite baffle installations. Rockford Fosgate RM110D2B Features: True Marine Grade compliance 100% UV stable ASA injection molded plastic parts Injection molded mineral filled polypropylene cone body with UV inhibitors UV and salt fog resistant Santoprene surround Ultra-flexible fully insulated silicone lead wire Proprietary corrosion resistant spring loaded push terminals Moisture, tear and fatigue resistant Aramid fiber spider Removable trim ring/grille Available in black or white Legendary Products & Support From Authorized Dealers When you choose Rockford Fosgate, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Rockford Fosgate dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Rockford Fosgate's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Rockford Fosgate dealer today!

Read more less

Rockford Fosgate M2D4-10IB M2 Series 10 Inch DVC 4-Ohm Color Optix Infinite Baffle Marine Subwoofer in Black A premium marine grade 10 inch dual voice coil 4-ohm infinite baffle subwoofer in black with Color Optix RGB LED lighting, 400W RMS handling, VersaSwitch impedance selection between 2-ohm and 8-ohm, and interchangeable stainless steel and sport grille inserts. Aramid-polyester composite spider, UV stable foam surround, PA66 glass-fill frame, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol connectors. Optimised for infinite baffle installations - no enclosure required. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2D4-10IB is an M2 series 10 inch dual voice coil (DVC) 4-ohm marine subwoofer in black, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It is the black version of the M2D4-10I, purpose-built for infinite baffle (free air) marine installations where a dedicated subwoofer enclosure is not available or practical. A mounting baffle is required to isolate front and rear wavelengths and prevent acoustic cancellation. The M2D4-10IB brings the full M2 series driver construction to a 10 inch infinite baffle format. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a UV stable injection-moulded foam surround using Rockford Fosgate's patented VAST technique for up to 25% more effective radiating cone area. The aramid-polyester composite spider provides superior excursion linearity. The ultra-high temperature PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable mounting platform. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. Fully insulated silicone tinsel leads are used throughout. The VersaSwitch allows impedance to be changed between 2-ohm (parallel) and 8-ohm (series) by flipping a single switch, without any additional wiring. Industry-first moulded in-frame Deutsch/Amphenol connectors combine Color Optix RGB lighting and audio signal in a single plug-and-play connection. Gold-plated marine grade brass terminals are also included. Both stainless steel and sport grille inserts are included with additional grille options available separately. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Features & Benefits VersaSwitch - 2-Ohm or 8-Ohm Without Rewiring: The VersaSwitch allows the DVC 4-ohm voice coils to be configured to parallel (2-ohm) or series (8-ohm) by flipping a single switch, enabling flexible amplifier matching without additional wiring. 400W RMS - Full M2 Series Power in a 10 Inch Infinite Baffle Format: The M2D4-10IB handles 400W RMS and 1600W peak, delivering premium M2 series output in a 10 inch driver optimised for hull or panel mounting without a dedicated enclosure. Optimised for Infinite Baffle - No Enclosure Required: The M2D4-10IB is engineered specifically for infinite baffle (free air) installations. A mounting baffle is required to physically separate the front and rear of the cone to prevent acoustic cancellation, but no sealed or ported enclosure box is needed. UV Stable Foam Surround with VAST Technology: The injection-moulded UV stable foam surround is co-moulded to the cone and attaches vertically via the patented VAST technique, increasing the effective radiating cone area by up to 25%. UV stable foam maintains flexibility and performance in marine UV exposure. Aramid-Polyester Composite Spider and PA66 Glass-Fill Frame: The aramid-polyester composite spider delivers superior excursion linearity and fatigue resistance. The PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable, and UV resistant mounting structure - matching the premium M2 series speaker construction. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly. Industry-First Moulded In-Frame Deutsch/Amphenol Connectors: Moulded in-frame connectors combine speaker signal and Color Optix RGB lighting in a single error-proof plug-and-play connection. Gold-plated marine grade brass spade terminals are also included. Interchangeable Grille Options - Stainless Steel and Sport Inserts Included: Both stainless steel and sport grille inserts are included, with additional grille options available separately for further customisation. Technical Specs Specification Detail SKU M2D4-10IB Size 10 inch Colour Black Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 4 Ohm VersaSwitch Parallel 2 Ohm VersaSwitch Series 8 Ohm Enclosure Type Infinite Baffle (no enclosure required) Power Handling 400W RMS / 1600W Peak SPL 90.3 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 43 Vas (Litres) 31.5 Qts 0.90 Qes 1.07 Qms 5.67 Xmax 12.0mm Re (Ohms) 6.6 Le (mH) 1.76 Sd (cm2) 363 Woofer Displacement 0.06 cu.ft (1.74 Litres) Voice Coil Diameter 2 inch (50.8mm) Voice Coil Former High Temp Kapton Magnet Weight 55.02 oz (1.56kg) Cutout Diameter 8.87 inch (225.3mm) Mounting Depth 4.44 inch (112.7mm) Surround UV Stable Injection-Moulded Foam (VAST) Spider Aramid-Polyester Composite Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame PA66 + 30% Glass Fill, UV Inhibitor Grille 100% UV Stable Centrex Plastic Grille Options Stainless Steel (included) + Sport Insert (included) Speaker Connector Integrated Deutsch/Amphenol + Gold-Plated Brass Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 6.26kg Warranty 2 Years Compatible With / Goes Well With The M2D4-10IB is suited to marine watercraft requiring a premium 10 inch infinite baffle subwoofer in black. A mounting baffle must be used to separate the front and rear acoustic wavelengths. The VersaSwitch enables pairing with amplifiers rated at 2-ohm or 8-ohm. Sold individually. The white version is available as the M2D4-10I. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, compatible with the M2D4-10IB at both 2-ohm and 8-ohm VersaSwitch settings M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M2D4-10IB with marine full-range speakers M2D4-10I - White version of this subwoofer for colour-matched installations M2D4-12I - Larger M2 series 12 inch white DVC 4-ohm infinite baffle subwoofer for installations where a bigger driver is preferred M2D2-10SB - M2 series 10 inch DVC 2-ohm Color Optix sealed enclosure subwoofer in black for builds where an enclosure is available Frequently Asked Questions What is the difference between the M2D4-10IB and the M2D2-10SB? Both are black M2 series 10 inch Color Optix marine subwoofers. The M2D4-10IB is a DVC 4-ohm infinite baffle subwoofer (VersaSwitch 2-ohm/8-ohm) optimised for free-air hull or panel mounting without an enclosure, handling 400W RMS. The M2D2-10SB is a DVC 2-ohm sealed enclosure subwoofer (VersaSwitch 1-ohm/4-ohm) requiring a 0.5 cu.ft sealed box, handling 400W RMS. Choose the M2D4-10IB for infinite baffle installations; choose the M2D2-10SB when a sealed enclosure is available. What is an infinite baffle installation and is an enclosure required? An infinite baffle (free air) installation mounts the subwoofer directly into a hull panel, storage lid, or partition rather than in a sealed or ported enclosure box. No dedicated enclosure is required, making it ideal for vessels with limited below-deck space. A mounting baffle is required to physically separate the front and rear of the subwoofer cone to prevent the front and rear acoustic waves from cancelling each other. What is the difference between the M2D4-10IB and the M2D4-12I? Both are M2 series DVC 4-ohm Color Optix infinite baffle subwoofers with the same VersaSwitch settings (2-ohm/8-ohm). The M2D4-10IB is the 10 inch black version with a 8.87 inch cutout and 4.44 inch mounting depth. The M2D4-12I is the 12 inch white version with a larger cutout and deeper mounting depth, delivering more bass extension and output capability. Choose the M2D4-10IB for a more compact infinite baffle installation; choose the M2D4-12I for maximum bass from an infinite baffle driver. Is the M2D4-10IB sold as a single unit or as a pair? The M2D4-10IB is sold individually - one subwoofer per purchase. Two units will need to be added to the order if a dual subwoofer installation is required. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, lighting effects, and brightness adjustment. The PMX-RGB controller is sold separately. The subwoofer can also be used without the controller at a fixed default colour setting straight out of the box.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate M2D4-10I M2 Series 10 Inch DVC 4-Ohm Color Optix Infinite Baffle Marine Subwoofer in White A premium marine grade 10 inch dual voice coil 4-ohm infinite baffle subwoofer in white with Color Optix RGB LED lighting, 400W RMS handling, VersaSwitch impedance selection between 2-ohm and 8-ohm, and interchangeable stainless steel and sport grille inserts. Aramid-polyester composite spider, UV stable foam surround, PA66 glass-fill frame, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol connectors. Optimised for infinite baffle installations - no enclosure required. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2D4-10I is an M2 series 10 inch dual voice coil (DVC) 4-ohm marine subwoofer in white, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It is the white version of the M2D4-10IB, purpose-built for infinite baffle (free air) marine installations where a dedicated subwoofer enclosure is not available or practical. A mounting baffle is required to isolate front and rear wavelengths and prevent acoustic cancellation. The M2D4-10I brings the full M2 series driver construction to a 10 inch infinite baffle format. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a UV stable injection-moulded foam surround using Rockford Fosgate's patented VAST technique for up to 25% more effective radiating cone area. The aramid-polyester composite spider provides superior excursion linearity. The ultra-high temperature PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable mounting platform. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. Fully insulated silicone tinsel leads are used throughout. The VersaSwitch allows impedance to be changed between 2-ohm (parallel) and 8-ohm (series) by flipping a single switch, without any additional wiring. Industry-first moulded in-frame Deutsch/Amphenol connectors combine Color Optix RGB lighting and audio signal in a single plug-and-play connection. Gold-plated marine grade brass terminals are also included. Both stainless steel and sport grille inserts are included with additional grille options available separately. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Features & Benefits VersaSwitch - 2-Ohm or 8-Ohm Without Rewiring: The VersaSwitch allows the DVC 4-ohm voice coils to be configured to parallel (2-ohm) or series (8-ohm) by flipping a single switch, enabling flexible amplifier matching without additional wiring. 400W RMS - Full M2 Series Power in a 10 Inch Infinite Baffle Format: The M2D4-10I handles 400W RMS and 1600W peak, delivering premium M2 series output in a 10 inch driver optimised for hull or panel mounting without a dedicated enclosure. Optimised for Infinite Baffle - No Enclosure Required: The M2D4-10I is engineered specifically for infinite baffle (free air) installations. A mounting baffle is required to physically separate the front and rear of the cone to prevent acoustic cancellation, but no sealed or ported enclosure box is needed. UV Stable Foam Surround with VAST Technology: The injection-moulded UV stable foam surround is co-moulded to the cone and attaches vertically via the patented VAST technique, increasing the effective radiating cone area by up to 25%. Aramid-Polyester Composite Spider and PA66 Glass-Fill Frame: The aramid-polyester composite spider delivers superior excursion linearity and fatigue resistance. The PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable, and UV resistant mounting structure. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly. Industry-First Moulded In-Frame Deutsch/Amphenol Connectors: Moulded in-frame connectors combine speaker signal and Color Optix RGB lighting in a single error-proof plug-and-play connection. Gold-plated marine grade brass spade terminals are also included. Interchangeable Grille Options - Stainless Steel and Sport Inserts Included: Both stainless steel and sport grille inserts are included, with additional grille options available separately for further customisation. Technical Specs Specification Detail SKU M2D4-10I Size 10 inch Colour White Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 4 Ohm VersaSwitch Parallel 2 Ohm VersaSwitch Series 8 Ohm Enclosure Type Infinite Baffle (no enclosure required) Power Handling 400W RMS / 1600W Peak SPL 90.3 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 43 Vas (Litres) 31.5 Qts 0.90 Qes 1.07 Qms 5.67 Xmax 12.0mm Re (Ohms) 6.6 Le (mH) 1.76 Sd (cm2) 363 Woofer Displacement 0.06 cu.ft (1.74 Litres) Voice Coil Diameter 2 inch (50.8mm) Voice Coil Former High Temp Kapton Magnet Weight 55.02 oz (1.56kg) Cutout Diameter 8.87 inch (225.3mm) Mounting Depth 4.44 inch (112.7mm) Surround UV Stable Injection-Moulded Foam (VAST) Spider Aramid-Polyester Composite Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame PA66 + 30% Glass Fill, UV Inhibitor Grille 100% UV Stable Centrex Plastic Grille Options Stainless Steel (included) + Sport Insert (included) Speaker Connector Integrated Deutsch/Amphenol + Gold-Plated Brass Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 6.26kg Warranty 2 Years Compatible With / Goes Well With The M2D4-10I is suited to marine watercraft requiring a premium 10 inch infinite baffle subwoofer in white. A mounting baffle must be used to separate the front and rear acoustic wavelengths. The VersaSwitch enables pairing with amplifiers rated at 2-ohm or 8-ohm. Sold individually. The black version is available as the M2D4-10IB. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, compatible with the M2D4-10I at both 2-ohm and 8-ohm VersaSwitch settings M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M2D4-10I with marine full-range speakers M2D4-10IB - Black version of this subwoofer for colour-matched installations M2D4-12I - Larger M2 series 12 inch white DVC 4-ohm infinite baffle subwoofer for installations where a bigger driver is preferred M2D2-10SB - M2 series 10 inch DVC 2-ohm Color Optix sealed enclosure subwoofer for builds where an enclosure is available Frequently Asked Questions What is the difference between the M2D4-10I and the M2D4-10IB? The M2D4-10I and M2D4-10IB are identical in specifications and features. The only difference is the colour - the M2D4-10I is white and the M2D4-10IB is black. Choose based on the colour scheme of your vessel. What is an infinite baffle installation and is an enclosure required? An infinite baffle (free air) installation mounts the subwoofer directly into a hull panel, storage lid, or partition rather than in a sealed or ported enclosure box. No dedicated enclosure is required, making it ideal for vessels with limited below-deck space. A mounting baffle is required to physically separate the front and rear of the subwoofer cone to prevent the front and rear acoustic waves from cancelling each other. What is the difference between the M2D4-10I and the M2D4-12I? Both are M2 series DVC 4-ohm Color Optix infinite baffle subwoofers in white with the same VersaSwitch settings (2-ohm/8-ohm). The M2D4-10I is the 10 inch version with an 8.87 inch cutout and 4.44 inch mounting depth. The M2D4-12I is the 12 inch version with a larger cutout and deeper mounting depth, delivering more bass extension and output capability. Choose the M2D4-10I for a more compact infinite baffle installation; choose the M2D4-12I for maximum bass output. Is the M2D4-10I sold as a single unit or as a pair? The M2D4-10I is sold individually - one subwoofer per purchase. Two units will need to be added to the order if a dual subwoofer installation is required. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, lighting effects, and brightness adjustment. The PMX-RGB controller is sold separately. The subwoofer can also be used without the controller at a fixed default colour setting straight out of the box.

Read more less

Rockford Fosgate M2D2-10IB M2 Series 10 Inch DVC 2-Ohm Color Optix Infinite Baffle Marine Subwoofer in Black A premium marine grade 10 inch dual voice coil 2-ohm infinite baffle subwoofer in black with Color Optix RGB LED lighting, 400W RMS handling, VersaSwitch impedance selection between 1-ohm and 4-ohm, and interchangeable stainless steel and sport grille inserts. Aramid-polyester composite spider, UV stable foam surround, PA66 glass-fill frame, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol connectors. Optimised for infinite baffle installations - no enclosure required. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2D2-10IB is an M2 series 10 inch dual voice coil (DVC) 2-ohm marine subwoofer in black, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It shares the same physical dimensions and construction as the M2D4-10IB but uses DVC 2-ohm voice coils, giving the VersaSwitch different impedance settings: 1-ohm (parallel) and 4-ohm (series). Like all M2 series IB subwoofers, the M2D2-10IB is optimised for infinite baffle (free air) marine installations where a dedicated enclosure is not available or practical. A mounting baffle is required to isolate front and rear wavelengths and prevent acoustic cancellation. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a UV stable injection-moulded foam surround using Rockford Fosgate's patented VAST technique for up to 25% more effective radiating cone area. The aramid-polyester composite spider provides superior excursion linearity. The ultra-high temperature PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable mounting platform. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. Fully insulated silicone tinsel leads are used throughout. Industry-first moulded in-frame Deutsch/Amphenol connectors combine Color Optix RGB lighting and audio signal in a single plug-and-play connection. Gold-plated marine grade brass terminals are also included. Both stainless steel and sport grille inserts are included. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Sold individually. Features & Benefits VersaSwitch - 1-Ohm or 4-Ohm Without Rewiring: The VersaSwitch allows the DVC 2-ohm voice coils to be configured to parallel (1-ohm) or series (4-ohm) by flipping a single switch. The 1-ohm setting maximises output from compatible mono amplifiers, while the 4-ohm setting suits amplifiers better matched to a higher impedance load. 400W RMS - Full M2 Series Power in a 10 Inch Infinite Baffle Format: The M2D2-10IB handles 400W RMS and 1600W peak with 11mm Xmax, delivering premium M2 series output in a 10 inch driver optimised for hull or panel mounting without a dedicated enclosure. Optimised for Infinite Baffle - No Enclosure Required: The M2D2-10IB is engineered specifically for infinite baffle (free air) installations. A mounting baffle is required to physically separate the front and rear of the cone to prevent acoustic cancellation, but no sealed or ported enclosure box is needed. UV Stable Foam Surround with VAST Technology: The injection-moulded UV stable foam surround is co-moulded to the cone and attaches vertically via the patented VAST technique, increasing the effective radiating cone area by up to 25%. Aramid-Polyester Composite Spider and PA66 Glass-Fill Frame: The aramid-polyester composite spider delivers superior excursion linearity and fatigue resistance. The PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable, and UV resistant mounting structure. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly. Industry-First Moulded In-Frame Deutsch/Amphenol Connectors: Moulded in-frame connectors combine speaker signal and Color Optix RGB lighting in a single error-proof plug-and-play connection. Gold-plated marine grade brass spade terminals are also included. Interchangeable Grille Options - Stainless Steel and Sport Inserts Included: Both stainless steel and sport grille inserts are included, with additional grille options available separately for further customisation. Technical Specs Specification Detail SKU M2D2-10IB Size 10 inch Colour Black Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 2 Ohm VersaSwitch Parallel 1 Ohm VersaSwitch Series 4 Ohm Enclosure Type Infinite Baffle (no enclosure required) Power Handling 400W RMS / 1600W Peak SPL 90.3 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 43 Vas (Litres) 30.5 Qts 0.74 Qes 0.86 Qms 5.69 Xmax 11.0mm Re (Ohms) 3.3 Le (mH) 1.17 Sd (cm2) 363 Woofer Displacement 0.06 cu.ft (1.74 Litres) Voice Coil Diameter 2 inch (50.8mm) Voice Coil Former High Temp Kapton Magnet Weight 55.02 oz (1.56kg) Cutout Diameter 8.87 inch (225.3mm) Mounting Depth 4.44 inch (112.7mm) Surround UV Stable Injection-Moulded Foam (VAST) Spider Aramid-Polyester Composite Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame PA66 + 30% Glass Fill, UV Inhibitor Grille 100% UV Stable Centrex Plastic Grille Options Stainless Steel (included) + Sport Insert (included) Speaker Connector Integrated Deutsch/Amphenol + Gold-Plated Brass Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 6.26kg Warranty 2 Years Compatible With / Goes Well With The M2D2-10IB is suited to marine watercraft requiring a premium 10 inch infinite baffle subwoofer in black with 1-ohm or 4-ohm VersaSwitch capability. A mounting baffle must be used to separate the front and rear acoustic wavelengths. Sold individually. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, capable of 750W at 1-ohm - well matched to the M2D2-10IB at 1-ohm VersaSwitch setting M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M2D2-10IB with marine full-range speakers M2D2-10I - White version of this subwoofer for colour-matched installations M2D4-10IB - Black DVC 4-ohm version (VersaSwitch 2-ohm/8-ohm) for comparison when amplifier impedance requirements differ M2D2-10SB - M2 series 10 inch DVC 2-ohm Color Optix sealed enclosure subwoofer in black for builds where an enclosure is available Frequently Asked Questions What is the difference between the M2D2-10IB and the M2D4-10IB? Both are black M2 series 10 inch Color Optix infinite baffle subwoofers with identical construction and physical dimensions. The only difference is voice coil impedance. The M2D2-10IB has DVC 2-ohm coils with VersaSwitch settings of 1-ohm (parallel) or 4-ohm (series), and Xmax of 11mm. The M2D4-10IB has DVC 4-ohm coils with VersaSwitch settings of 2-ohm (parallel) or 8-ohm (series), and Xmax of 12mm. Choose the M2D2-10IB for amplifiers designed to deliver maximum power at 1-ohm or 2-ohm loads; choose the M2D4-10IB for amplifiers better matched to 2-ohm or 8-ohm impedance. What is an infinite baffle installation and is an enclosure required? An infinite baffle (free air) installation mounts the subwoofer directly into a hull panel, storage lid, or partition rather than in a sealed or ported enclosure box. No dedicated enclosure is required, making it ideal for vessels with limited below-deck space. A mounting baffle is required to physically separate the front and rear of the subwoofer cone to prevent the front and rear acoustic waves from cancelling each other. What is the difference between the M2D2-10IB and the M2D2-10SB? Both are black M2 series 10 inch DVC 2-ohm Color Optix subwoofers with VersaSwitch settings of 1-ohm and 4-ohm. The M2D2-10IB is optimised for infinite baffle (free air) installations with no enclosure required. The M2D2-10SB is optimised for sealed enclosure installations requiring a 0.5 cu.ft box. Choose the M2D2-10IB for hull or panel mounting; choose the M2D2-10SB when a sealed enclosure is available. Is the M2D2-10IB sold as a single unit or as a pair? The M2D2-10IB is sold individually - one subwoofer per purchase. Two units will need to be added to the order if a dual subwoofer installation is required. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, lighting effects, and brightness adjustment. The PMX-RGB controller is sold separately. The subwoofer can also be used without the controller at a fixed default colour setting straight out of the box.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate M2D2-10I M2 Series 10 Inch DVC 2-Ohm Color Optix Infinite Baffle Marine Subwoofer in White A premium marine grade 10 inch dual voice coil 2-ohm infinite baffle subwoofer in white with Color Optix RGB LED lighting, 400W RMS handling, VersaSwitch impedance selection between 1-ohm and 4-ohm, and interchangeable stainless steel and sport grille inserts. Aramid-polyester composite spider, UV stable foam surround, PA66 glass-fill frame, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol connectors. Optimised for infinite baffle installations - no enclosure required. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2D2-10I is an M2 series 10 inch dual voice coil (DVC) 2-ohm marine subwoofer in white, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It is the white version of the M2D2-10IB, sharing identical specifications and construction. The DVC 2-ohm voice coils give the VersaSwitch settings of 1-ohm (parallel) and 4-ohm (series). Like all M2 series IB subwoofers, the M2D2-10I is optimised for infinite baffle (free air) marine installations where a dedicated enclosure is not available or practical. A mounting baffle is required to isolate front and rear wavelengths and prevent acoustic cancellation. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a UV stable injection-moulded foam surround using Rockford Fosgate's patented VAST technique for up to 25% more effective radiating cone area. The aramid-polyester composite spider provides superior excursion linearity. The ultra-high temperature PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable mounting platform. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. Fully insulated silicone tinsel leads are used throughout. Industry-first moulded in-frame Deutsch/Amphenol connectors combine Color Optix RGB lighting and audio signal in a single plug-and-play connection. Gold-plated marine grade brass terminals are also included. Both stainless steel and sport grille inserts are included. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Sold individually. The black version is available as the M2D2-10IB. Features & Benefits VersaSwitch - 1-Ohm or 4-Ohm Without Rewiring: The VersaSwitch allows the DVC 2-ohm voice coils to be configured to parallel (1-ohm) or series (4-ohm) by flipping a single switch. The 1-ohm setting maximises output from compatible mono amplifiers, while the 4-ohm setting suits amplifiers better matched to a higher impedance load. 400W RMS - Full M2 Series Power in a 10 Inch Infinite Baffle Format: The M2D2-10I handles 400W RMS and 1600W peak with 11mm Xmax, delivering premium M2 series output in a 10 inch driver optimised for hull or panel mounting without a dedicated enclosure. Optimised for Infinite Baffle - No Enclosure Required: The M2D2-10I is engineered specifically for infinite baffle (free air) installations. A mounting baffle is required to physically separate the front and rear of the cone to prevent acoustic cancellation, but no sealed or ported enclosure box is needed. UV Stable Foam Surround with VAST Technology: The injection-moulded UV stable foam surround is co-moulded to the cone and attaches vertically via the patented VAST technique, increasing the effective radiating cone area by up to 25%. Aramid-Polyester Composite Spider and PA66 Glass-Fill Frame: The aramid-polyester composite spider delivers superior excursion linearity and fatigue resistance. The PA66 frame with 30% glass fill and UV inhibitors provides a rigid, thermally stable, and UV resistant mounting structure. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly. Industry-First Moulded In-Frame Deutsch/Amphenol Connectors: Moulded in-frame connectors combine speaker signal and Color Optix RGB lighting in a single error-proof plug-and-play connection. Gold-plated marine grade brass spade terminals are also included. Interchangeable Grille Options - Stainless Steel and Sport Inserts Included: Both stainless steel and sport grille inserts are included, with additional grille options available separately for further customisation. Technical Specs Specification Detail SKU M2D2-10I Size 10 inch Colour White Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 2 Ohm VersaSwitch Parallel 1 Ohm VersaSwitch Series 4 Ohm Enclosure Type Infinite Baffle (no enclosure required) Power Handling 400W RMS / 1600W Peak SPL 90.3 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 43 Vas (Litres) 30.5 Qts 0.74 Qes 0.86 Qms 5.69 Xmax 11.0mm Re (Ohms) 3.3 Le (mH) 1.17 Sd (cm2) 363 Woofer Displacement 0.06 cu.ft (1.74 Litres) Voice Coil Diameter 2 inch (50.8mm) Voice Coil Former High Temp Kapton Magnet Weight 55.02 oz (1.56kg) Cutout Diameter 8.87 inch (225.3mm) Mounting Depth 4.44 inch (112.7mm) Surround UV Stable Injection-Moulded Foam (VAST) Spider Aramid-Polyester Composite Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame PA66 + 30% Glass Fill, UV Inhibitor Grille 100% UV Stable Centrex Plastic Grille Options Stainless Steel (included) + Sport Insert (included) Speaker Connector Integrated Deutsch/Amphenol + Gold-Plated Brass Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 6.26kg Warranty 2 Years Compatible With / Goes Well With The M2D2-10I is suited to marine watercraft requiring a premium 10 inch infinite baffle subwoofer in white with 1-ohm or 4-ohm VersaSwitch capability. A mounting baffle must be used to separate the front and rear acoustic wavelengths. Sold individually. The black version is available as the M2D2-10IB. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, capable of 750W at 1-ohm - well matched to the M2D2-10I at 1-ohm VersaSwitch setting M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M2D2-10I with marine full-range speakers M2D2-10IB - Black version of this subwoofer for colour-matched installations M2D4-10I - White DVC 4-ohm version (VersaSwitch 2-ohm/8-ohm) for comparison when amplifier impedance requirements differ M2D2-10SB - M2 series 10 inch DVC 2-ohm Color Optix sealed enclosure subwoofer for builds where an enclosure is available Frequently Asked Questions What is the difference between the M2D2-10I and the M2D2-10IB? The M2D2-10I and M2D2-10IB are identical in specifications and features. The only difference is the colour - the M2D2-10I is white and the M2D2-10IB is black. Choose based on the colour scheme of your vessel. What is the difference between the M2D2-10I and the M2D4-10I? Both are white M2 series 10 inch Color Optix infinite baffle subwoofers with identical construction and physical dimensions. The M2D2-10I has DVC 2-ohm coils with VersaSwitch settings of 1-ohm (parallel) or 4-ohm (series), and Xmax of 11mm. The M2D4-10I has DVC 4-ohm coils with VersaSwitch settings of 2-ohm (parallel) or 8-ohm (series), and Xmax of 12mm. Choose the M2D2-10I for amplifiers designed to deliver maximum power at 1-ohm or 2-ohm loads; choose the M2D4-10I for amplifiers better suited to 2-ohm or 8-ohm impedance. What is an infinite baffle installation and is an enclosure required? An infinite baffle (free air) installation mounts the subwoofer directly into a hull panel, storage lid, or partition rather than in a sealed or ported enclosure box. No dedicated enclosure is required, making it ideal for vessels with limited below-deck space. A mounting baffle is required to physically separate the front and rear of the subwoofer cone to prevent the front and rear acoustic waves from cancelling each other. Is the M2D2-10I sold as a single unit or as a pair? The M2D2-10I is sold individually - one subwoofer per purchase. Two units will need to be added to the order if a dual subwoofer installation is required. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, lighting effects, and brightness adjustment. The PMX-RGB controller is sold separately. The subwoofer can also be used without the controller at a fixed default colour setting straight out of the box.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate M1D4-10B M1 Series 10 Inch DVC 4-Ohm Color Optix Marine Subwoofer in Black A marine grade 10 inch dual voice coil 4-ohm subwoofer in black with Color Optix RGB LED lighting, 300W RMS handling, and VersaSwitch impedance selection between 2-ohm and 8-ohm. Santoprene VAST surround, mineral-filled polypropylene cone, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol plug-and-play connectors. Compatible with sealed (1.1 cu.ft) and vented (1.45 cu.ft) enclosures. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M1D4-10B is an M1 series 10 inch dual voice coil (DVC) 4-ohm marine subwoofer in black, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It shares the same M1 series platform and construction as the M1D4-12B but in a more compact 10 inch format, with smaller sealed (1.1 cu.ft) and vented (1.45 cu.ft) enclosure requirements suited to vessels with less available space. The VersaSwitch allows impedance to be changed between 2-ohm (parallel) and 8-ohm (series) by flipping a single switch, without any additional wiring. Integrated Deutsch/Amphenol connectors are moulded directly into the basket frame, providing error-proof plug-and-play connectivity for both the speaker signal and Color Optix RGB lighting. Conventional zinc nickel-plated marine grade brass spade terminals are also included as an alternative wiring option. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a Santoprene VAST surround. Rockford Fosgate's patented VAST technique increases the effective radiating cone area by up to 25%. A linear synthetic fiber blend spider provides consistent excursion control. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. The 100% UV stable ASA plastic frame and grille resist discolouration in marine environments. Optically clear UV stable RGB lighting encapsulation protects the LED PCB throughout. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Sold individually - one subwoofer per purchase. Features & Benefits VersaSwitch - 2-Ohm or 8-Ohm Without Rewiring: The VersaSwitch allows the DVC 4-ohm voice coils to be configured to parallel (2-ohm) or series (8-ohm) by flipping a single switch, enabling flexible amplifier matching without additional wiring or soldering. Compact 10 Inch Format - Smaller Enclosure Requirements: The M1D4-10B fits a sealed enclosure of 1.1 cu.ft (31.15 litres) or a vented enclosure of 1.45 cu.ft (41.06 litres), making it well suited to under-seat compartments and space-constrained vessel installations where the larger M1D4-12B cannot fit. Color Optix RGB LED Lighting - App Controlled: Ultra-bright wide-angle RGB LEDs are protected by optically clear UV stable encapsulation, controllable via the PMX-RGB controller and RF Connect app on iOS and Android. The PMX-RGB controller is sold separately. Integrated Deutsch/Amphenol Connectors - True Marine Ecosystem: Moulded in-frame Deutsch/Amphenol connectors combine speaker signal and Color Optix RGB lighting into a single error-proof plug-and-play connection. Zinc nickel-plated marine grade brass spade terminals are also included for standard wiring installations. Santoprene VAST Surround - UV and Salt-Fog Resistant: The Santoprene VAST surround is co-moulded to the mineral-filled polypropylene cone and attaches vertically using Rockford Fosgate's patented VAST technique, increasing the effective radiating cone area by up to 25% for more bass output from the same 10 inch driver. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly in spray-intensive marine environments. ASTM and ISO Tested - Purpose-Built Marine Construction: Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. Technical Specs Specification Detail SKU M1D4-10B Size 10 inch Colour Black Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 4 Ohm VersaSwitch Parallel 2 Ohm VersaSwitch Series 8 Ohm Power Handling 300W RMS / 1200W Peak SPL 91.5 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 37 Vas (Litres) 39.3 Qts 0.47 Qes 0.51 Qms 7.23 Xmax 7.0mm Re (Ohms) 7.5 Le (mH) 3.87 Sd (cm2) 394.1 Woofer Displacement 0.10 cu.ft (2.80 Litres) Voice Coil Diameter 2 inch (50mm) Voice Coil Former High Temp Kapton Magnet Weight 47.70 oz (1.35kg) Sealed Box Volume 1.1 cu.ft (31.15 Litres) Vented Box Volume 1.45 cu.ft (41.06 Litres) Cutout Diameter 8.90 inch (226mm) Mounting Depth 4.23 inch (107.4mm) Surround Santoprene VAST Spider Linear Synthetic Fiber Blend Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame 100% UV Stable ASA Plastic Speaker Connector Integrated Deutsch/Amphenol + Zinc Nickel-Plated Brass Spade Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 3.9kg Warranty 2 Years Compatible With / Goes Well With The M1D4-10B is suited to marine watercraft, pontoon boats, ski boats, and any vessel requiring a compact 10 inch marine subwoofer with Color Optix lighting. The smaller sealed (1.1 cu.ft) and vented (1.45 cu.ft) enclosure requirements make it the better choice over the M1D4-12B for space-constrained installations. The VersaSwitch enables pairing with amplifiers rated at 2-ohm or 8-ohm. Sold individually. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, compatible with the M1D4-10B at both 2-ohm and 8-ohm VersaSwitch settings M2-500X1 - M2 series 500W mono marine amplifier for a matched M2 ecosystem pairing M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M1D4-10B with marine full-range speakers M1D4-10 - White version of this subwoofer for colour-matched installations M1D4-12B - Larger M1 series 12 inch black DVC 4-ohm subwoofer for installations with more enclosure space Frequently Asked Questions What is the difference between the M1D4-10B and the M1D4-12B? Both are black M1 series DVC 4-ohm Color Optix marine subwoofers with the same VersaSwitch settings (2-ohm parallel / 8-ohm series), power handling (300W RMS), and construction. The M1D4-10B is the 10 inch version with a shallower 4.23 inch mounting depth, smaller sealed (1.1 cu.ft) and vented (1.45 cu.ft) enclosure requirements, and a higher Fs of 37Hz suited to a smaller enclosure volume. The M1D4-12B is the 12 inch version with a deeper 6.65 inch mounting depth, larger enclosure requirements, and a lower Fs of 27Hz for deeper bass extension. Choose the M1D4-10B where space is limited; choose the M1D4-12B for maximum bass depth. What impedance settings does the VersaSwitch provide on the M1D4-10B? The M1D4-10B uses DVC 4-ohm voice coils. The VersaSwitch configures the coils to parallel (2-ohm total) or series (8-ohm total) without any rewiring. Use the 2-ohm parallel setting when pairing with an amplifier rated for 2-ohm loads for maximum output, or the 8-ohm series setting for amplifiers better suited to a higher impedance. Contact us if you need help selecting the correct setting for your amplifier. What enclosure types are compatible with the M1D4-10B? The M1D4-10B is compatible with both sealed (1.1 cu.ft / 31.15 litres) and vented (1.45 cu.ft / 41.06 litres) enclosure configurations. A sealed enclosure delivers tighter, more accurate bass while the vented enclosure produces more output at the port tuning frequency. The smaller enclosure volumes compared to the 12 inch models make the M1D4-10B a practical choice for vessels with limited storage compartment space. Is the M1D4-10B sold as a single unit or as a pair? The M1D4-10B is sold individually - one subwoofer per purchase. If your installation requires two subwoofers, two units will need to be added to the order. Does the Color Optix lighting require a separate controller? Yes. Color Optix RGB lighting requires the PMX-RGB controller and the RF Connect app (available on iOS and Android) to access full colour control, lighting effects, and brightness adjustment. The PMX-RGB controller is sold separately. The subwoofer can also be used without the controller at a fixed default colour setting straight out of the box.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate M1D2-10 M1 Series 10 Inch DVC 2-Ohm Color Optix Marine Subwoofer in White A marine grade 10 inch dual voice coil 2-ohm subwoofer in white with Color Optix RGB LED lighting, 300W RMS handling, and VersaSwitch impedance selection between 1-ohm and 4-ohm. Santoprene VAST surround, mineral-filled polypropylene cone, vented motor with nano-coated mesh screen, and integrated Deutsch/Amphenol plug-and-play connectors. Compatible with sealed and vented enclosures. IPX6 rated and ASTM B117 and G154 tested. Sold individually (1 each). Backed by a 2 year warranty. Product Overview The Rockford Fosgate M1D2-10 is an M1 series 10 inch dual voice coil (DVC) 2-ohm marine subwoofer in white, featuring Color Optix RGB LED illumination controllable via the PMX-RGB controller and RF Connect app (available on iOS and Android, sold separately). It shares the same platform, construction, and specifications as the M1D2-10B but is finished in white. The DVC 2-ohm voice coils give the VersaSwitch settings of 1-ohm (parallel) and 4-ohm (series). The VersaSwitch allows impedance to be changed between 1-ohm (parallel) and 4-ohm (series) by flipping a single switch, without any additional wiring. Integrated Deutsch/Amphenol connectors are moulded directly into the basket frame, providing error-proof plug-and-play connectivity for both the speaker signal and Color Optix RGB lighting. Conventional zinc nickel-plated marine grade brass spade terminals are also included as an alternative wiring option. The cone is injection-moulded mineral-filled polypropylene with UV inhibitors, co-moulded with a Santoprene VAST surround. Rockford Fosgate's patented VAST technique increases the effective radiating cone area by up to 25%. A linear synthetic fiber blend spider provides consistent excursion control. The vented motor design with a water-repelling nano-coated mesh screen allows heat dissipation at high output levels while protecting the motor from water ingress. The 100% UV stable ASA plastic frame and grille resist discolouration in marine environments. Optically clear UV stable RGB lighting encapsulation protects the LED PCB throughout. Compatible with both sealed and vented enclosure configurations. Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. Klippel Verified certification applied. Sold individually - one subwoofer per purchase. The black version is available as the M1D2-10B. Features & Benefits VersaSwitch - 1-Ohm or 4-Ohm Without Rewiring: The VersaSwitch allows the DVC 2-ohm voice coils to be configured to parallel (1-ohm) or series (4-ohm) by flipping a single switch. The 1-ohm setting maximises output from compatible mono amplifiers, while the 4-ohm setting suits amplifiers better matched to a higher impedance load. Compact 10 Inch Format - Space-Efficient Marine Bass: The M1D2-10 delivers M1 series Color Optix marine subwoofer performance in a 10 inch format with a 4.23 inch mounting depth and 8.90 inch cutout diameter, suited to under-seat compartments and vessels with limited enclosure space. Color Optix RGB LED Lighting - App Controlled: Ultra-bright wide-angle RGB LEDs are protected by optically clear UV stable encapsulation, controllable via the PMX-RGB controller and RF Connect app on iOS and Android. The PMX-RGB controller is sold separately. Integrated Deutsch/Amphenol Connectors - True Marine Ecosystem: Moulded in-frame Deutsch/Amphenol connectors combine speaker signal and Color Optix RGB lighting into a single error-proof plug-and-play connection. Zinc nickel-plated marine grade brass spade terminals are also included for standard wiring installations. Santoprene VAST Surround - UV and Salt-Fog Resistant: The Santoprene VAST surround is co-moulded to the mineral-filled polypropylene cone and attaches vertically using Rockford Fosgate's patented VAST technique, increasing the effective radiating cone area by up to 25% for more bass output from the same 10 inch driver. Vented Motor with Nano-Coated Water-Repelling Mesh Screen: The vented motor design allows heat to dissipate from the 2 inch (50mm) Kapton voice coil former at high output levels, while the nano-coated mesh screen prevents water from entering the motor assembly in spray-intensive marine environments. ASTM and ISO Tested - Purpose-Built Marine Construction: Tested to ASTM B117 (500-hour salt/fog), ASTM G154 (500-hour accelerated UV), and ISO60068-2-64 vibration standards. IPX6 water intrusion rating confirms protection against powerful jets of water from any direction. Technical Specs Specification Detail SKU M1D2-10 Size 10 inch Colour White Voice Coil Type Dual Voice Coil (DVC) Nominal Impedance (each coil) 2 Ohm VersaSwitch Parallel 1 Ohm VersaSwitch Series 4 Ohm Power Handling 300W RMS / 1200W Peak SPL 91.5 dB (1W/1m) Frequency Response 20 Hz - 750 Hz Fs (Hz) 34 Vas (Litres) 44.2 Qts 0.44 Qes 0.47 Qms 7.80 Xmax 7.0mm Re (Ohms) 3.7 Le (mH) 2.22 Sd (cm2) 394.1 Woofer Displacement 0.10 cu.ft (2.80 Litres) Voice Coil Diameter 2 inch (50mm) Voice Coil Former High Temp Kapton Magnet Weight 47.70 oz (1.35kg) Cutout Diameter 8.90 inch (226mm) Mounting Depth 4.23 inch (107.4mm) Surround Santoprene VAST Spider Linear Synthetic Fiber Blend Motor Design Vented with Nano-Coated Water-Repelling Mesh Screen Frame 100% UV Stable ASA Plastic Speaker Connector Integrated Deutsch/Amphenol + Zinc Nickel-Plated Brass Spade Terminals Lighting Control Color Optix via PMX-RGB + RF Connect App Surround Technology VAST Water Intrusion Rating IPX6 Salt/Fog Testing ASTM B117 (500 hours) UV Testing ASTM G154 (500 hours) Vibration Testing ISO60068-2-64 Sold As Individually (1 each) Certifications Klippel Verified Shipping Weight 3.9kg Warranty 2 Years Compatible With / Goes Well With The M1D2-10 is suited to marine watercraft, pontoon boats, ski boats, and any vessel requiring a compact 10 inch marine subwoofer with Color Optix lighting. The VersaSwitch enables pairing with amplifiers rated at 1-ohm or 4-ohm. Sold individually. The black version is available as the M1D2-10B. Goes Well With: PMX-RGB - Rockford Fosgate Color Optix RGB controller required to access full Color Optix lighting control and RF Connect app integration M5-1000X1 - M5 series 1000W marine monoblock amplifier, capable of 750W at 1-ohm - well matched to the M1D2-10 at 1-ohm VersaSwitch setting M2-500X1 - M2 series 500W mono marine amplifier for a matched M2 ecosystem pairing M5-1500X5 - M5 series 1500W 5-channel marine amplifier for full system builds pairing the M1D2-10 with marine full-range speakers M1D2-10B - Black version of this subwoofer for colour-matched installations M1D2-12 - Larger M1 series 12 inch white DVC 2-ohm subwoofer for installations with more enclosure space Frequently Asked Questions What is the difference between the M1D2-10 and the M1D4-10? Both are white M1 series 10 inch Color Optix marine subwoofers with identical construction, power handling, and physical dimensions. The only difference is voice coil impedance. The M1D2-10 has DVC 2-ohm coils with VersaSwitch settings of 1-ohm (parallel) or 4-ohm (series). The M1D4-10 has DVC 4-ohm coils with VersaSwitch settings of 2-ohm (parallel) or 8-ohm (series). Choose the M1D2-10 for amplifiers that deliver maximum power at 1-ohm or 2-ohm loads; choose the M1D4-10 for amplifiers better suited to 2-ohm or 8-ohm impedance. What impedance settings does the VersaSwitch provide on the M1D2-10? The M1D2-10 uses DVC 2-ohm voice coils. The VersaSwitch configures the coils to parallel (1-ohm total) or series (4-ohm total) without any rewiring. Use the 1-ohm parallel setting when pairing with an amplifier rated for 1-ohm operation for maximum power output, or the 4-ohm series setting when your amplifier is better suited to a higher impedance load. What is the difference between the M1D2-10 and the M1D2-12? Both are white M1 series DVC 2-ohm Color Optix marine subwoofers with the same VersaSwitch settings (1-ohm parallel / 4-ohm series), power handling (300W RMS), and construction. The M1D2-10 is the 10 inch version with a shallower 4.23 inch mounting depth and smaller enclosure requirements. The M1D2-12 is the 12 inch version with deeper mounting depth and a lower Fs of 26Hz for deeper bass extension. Choose the M1D2-10 where space is limited; choose the M1D2-12 for maximum bass depth. Is the M1D2-10 sold as a single unit or as a pair? The M1D2-10 is sold individually - one subwoofer per purchase. Two units will need to be added to the order if a dual subwoofer installation is required. Does the M1D2-10 come in a black version? Yes. The black version is available as the M1D2-10B, sharing the same specifications and construction.

Read more less