Jump-Start Any Vehicle Anywhere with 800 Amps of Portable Lithium Power Product Overview The Hulk 4x4 HU6510 is a compact lithium-ion jump starter built to get you back on the road without waiting on a service vehicle. Packing 10,400mAh of lithium cobalt battery capacity and a peak output of 800 amps, it's rated to start petrol engines up to 6.0L and diesel engines up to 3.0L, making it a solid option for everything from daily drivers to bigger 4WDs and utes. Beyond jump-starting, the HU6510 doubles as a portable power bank with dual USB ports, dual USB-C inputs, and 10W wireless charging for compatible devices, plus a multi-mode LED flashlight with SOS and strobe functions. It's protected against reverse polarity, short circuits, over-discharge, and overheating, and comes packed in an EVA protective carry case so it can live in the vehicle ready to go when needed. Features & Benefits 800A peak / 300A starting current – enough grunt to start petrol engines up to 6.0L and diesel engines up to 3.0L, handy for tradies and 4WD owners who can't always get to a workshop Spark-proof, reverse polarity clamps – safer connection when jump-starting in low light or awkward engine bays 10W wireless charging + dual USB-C inputs – charge the unit itself or top up phones and devices without extra cables, useful on long touring trips Multi-function LED display – shows battery charge and current levels at a glance so you're not guessing before a start attempt Multi-mode LED flashlight (solid/SOS/strobe) – doubles as an emergency light for roadside breakdowns or camp use Rubberised tyre-tread housing – built to handle being tossed in a tool box, ute tray, or glovebox without cracking EVA protective carry case included – keeps the unit and cables together and protected in storage Technical Specs Specification Detail Battery type Lithium Cobalt Battery capacity 10,400mAh Starting current 300A Peak current 800A Charging time 2–4 hours Input 15V 1A (USB) Output 5V 3A Wireless charging 10W (compatible devices only) Inputs Dual USB-C Outputs Dual USB Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +70°C Dimensions 158mm (L) x 75mm (W) x 31mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 6.0L engine capacity Diesel vehicles up to 3.0L engine capacity Most USB and USB-C chargeable devices (phones, tablets, cameras) Qi-compatible wireless charging devices 4WD, ute, and touring setups where a spare power source and light source are handy in one unit Weight 1.0kg Frequently Asked Questions Will this start my 4WD or ute? Yes, it's rated to jump-start petrol engines up to 6.0L and diesel engines up to 3.0L, which covers most utes and 4WDs on Australian roads. How long does it take to fully charge? The HU6510 takes approximately 2–4 hours to charge fully from the included USB charging cable. Can I use it to charge my phone? Yes, it has dual USB output ports plus 10W wireless charging for compatible devices, so it works as a portable power bank too. Is it safe if I connect the clamps the wrong way? Yes, the clamps are spark-proof with reverse polarity protection, and the unit also has short circuit, over-discharge, and overheat protection. How many jump starts can I expect from one charge? This depends on engine size and condition, but the 10,400mAh lithium battery and 800A peak output are designed for multiple start attempts per charge under normal conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Biggest Jump Starter in the Hulk 4x4 Range 2,500 Amps of High-Density Lithium Power Product Overview The Hulk 4x4 HU6512 sits at the top of the Hulk jump starter range, packing 28,000mAh of high energy density lithium cobalt battery capacity and a 2,500A peak output to handle the most demanding engine starts petrol up to 10.0L and diesel up to 8.0L. That puts it in range for heavy 4WDs, large commercial vehicles, trucks, and high-displacement diesel rigs where a standard jump starter simply won't cut it. Like the rest of the Hulk range, it doubles as a portable multi-output power station with dual USB ports, DC outputs across 12V, 16V, and 19V, and an included laptop adaptor harness and 240V AC charger. The multi-mode LED flashlight, multi-function LED display, and rubberised housing round it out as a practical all-in-one emergency kit for serious touring, worksite, and remote use. Features & Benefits 2,500A peak / 1,200A starting current — the highest output in the Hulk 4x4 jump starter range; rated for petrol engines up to 10.0L and diesel engines up to 8.0L, covering heavy trucks and the largest 4WDs on the road 28,000mAh high energy density lithium cobalt battery — larger reserve capacity than lower models means more start attempts and longer device charging between recharges Spark-proof, reverse polarity clamps — safer clamping under the bonnet, particularly useful on large engine bays and in remote or low-light conditions Multi-voltage DC output (12V / 16V / 19V at 3.5A) — charges laptops and DC-powered devices without needing mains power; dual 12V and 19V outlets both rated at 3.5A Full accessory kit included — 240V AC charger, car charger adaptor, laptop adaptor harness, and 4-in-1 USB cable cover virtually every charging scenario Multi-function LED display — shows battery charge level and current draw before and during a start attempt Multi-mode LED flashlight (solid/SOS/strobe) — practical for roadside breakdowns, remote camping, or emergency signalling Black and grey rubberised housing — impact-resistant construction for life in a ute tray, toolbox, or boot EVA protective carry case — keeps all accessories and clamps together and protected during storage Technical Specs Specification Detail Battery type Lithium Cobalt Battery capacity 28,000mAh Starting current 1,200A Peak current 2,500A Charging time 5–8 hours Input (USB) 15V 1A Input (secondary) 18V 2A USB output 5V 2.1A DC output 12V / 16V / 19V at 3.5A DC outlets Dual 12V and 19V (both 3.5A) Dual USB ports Yes Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +60°C Dimensions 183mm (L) x 119mm (W) x 45mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 10.0L engine capacity Diesel vehicles up to 8.0L engine capacity Laptops and DC-powered devices via 12V/16V/19V outputs and included laptop adaptor harness USB-chargeable devices (phones, tablets, cameras) via dual USB ports Heavy 4WDs, trucks, and large commercial vehicles requiring high-current emergency starting Weight 3.04kg (shipping weight including packaging) Frequently Asked Questions How does the HU6512 compare to the smaller Hulk jump starters? The HU6512 is the top-tier model, offering the largest battery (28,000mAh), highest peak current (2,500A), and widest diesel engine rating (up to 8.0L) in the Hulk 4x4 jump starter range. Will it start large diesel trucks or commercial vehicles? Yes — the 2,500A peak output and 8.0L diesel rating make it suitable for heavy 4WDs, large utes, and light commercial vehicles that lower-rated starters can't handle. What's the difference between the 15V and 18V inputs? The unit accepts both a 15V 1A USB input and an 18V 2A secondary input, giving you flexibility to recharge via the included car charger adaptor or 240V AC charger. Can I charge a laptop directly from the HU6512? Yes — it includes a laptop adaptor harness and DC outputs at 12V, 16V, and 19V (3.5A), plus dual 12V and 19V outlets, covering most laptop charging requirements. How long does the HU6512 take to fully charge? Expect 5–8 hours from flat to full using the included 240V AC charger or car charger adaptor, depending on the input source.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Professional-Grade 12V/24V Jump Starter Built for Heavy Machinery, Trucks, and Zero-Downtime Operations Product Overview The Hulk 4x4 HU6514 is a professional-series heavy-duty jump starter engineered for operators who can't afford downtime. With 80,000mAh (296Wh) of lithium cobalt battery capacity and a 15,000A peak output on 12V systems (6,000A on 24V), it's built for the kind of equipment that smaller portable starters simply can't touch semi-trucks, buses, heavy plant, agricultural machinery, and large diesel engines across construction, mining, and transport industries. Unlike compact jump starters, the HU6514 features integrated jumper cables, dual 12V/24V output voltage, and a rated lifetime of up to 5,000 starts. It also functions as a multi-output portable power station with four USB-A ports, USB-C input/output, and dual 12V DC auxiliary ports making it a practical on-site power hub beyond its jump-starting role. Features & Benefits 15,000A peak (12V) / 6,000A peak (24V) — handles the starting demands of semi-trucks, large diesel plant, and heavy commercial vehicles that lower-rated starters can't manage 80,000mAh / 296Wh lithium cobalt battery — massive reserve capacity designed for repeated heavy-duty use on-site or in the field Up to 5,000 estimated lifetime jump starts — long-term reliability for fleet operators and plant managers, not just occasional roadside use Integrated jumper cables — no separate clamp storage needed; cables are built into the unit for faster deployment on busy worksites Dual output voltage (12V and 24V) — covers the full range of 12V and 24V petrol and diesel vehicles from passenger cars to large trucks and machinery 4x USB-A + USB-C output/input + dual 12V DC aux ports — charges phones, tablets, and other devices while on-site; comprehensive utility in a single unit LED display monitoring — shows power level, output voltage, and real-time current draw so operators know exactly what the unit is doing at any moment Multi-mode LED flashlight (solid/SOS/strobe) — useful for engine bays, dark worksites, and emergency situations AC wall charger included — recharges from any 120–240V mains outlet in approximately 8 hours; accepts 18VDC 2A via 5.5mm input or USB-C Technical Specs Specification Detail Battery type Lithium-ion Cobalt Battery capacity 80,000mAh / 296Wh Starting current 12V: 3,000A / 24V: 2,000A Peak current 12V: 15,000A / 24V: 6,000A Output voltage 12–16V DC and 24–32V DC Output ports Integrated jumper cables; 4x USB-A 5V 2.1A (QC3.0); 2x 12V DC aux 10A; 1x 12V 5.5mm 3.5A; 1x USB-C Input charging ports 5.5mm 18VDC 2A; USB-C AC recharging 18VDC via 120–240V AC wall charger (~8 hours) Estimated lifetime starts Up to 5,000 Storage temperature -20°C to +80°C Operating temperature Not specified Dimensions 356mm (L) x 128mm (W) x 418mm (H) Warranty 1 year Compatible With / Goes Well With 12V petrol and diesel vehicles (passenger cars, utes, 4WDs, light commercial) 24V diesel vehicles (semi-trucks, buses, heavy plant, agricultural and mining machinery) Most 12V and 24V engines including heavy machinery and transport equipment (per manufacturer specification) USB and USB-C chargeable devices via multi-port output On-site power applications requiring 12V DC auxiliary output Weight 8.35kg (unit weight) / 10.23kg (shipping weight including packaging) Frequently Asked Questions Can the HU6514 start both 12V and 24V vehicles? Yes — it delivers 15,000A peak on 12V systems and 6,000A peak on 24V systems, covering both light vehicles and heavy commercial equipment like semi-trucks and buses. How many jump starts can I expect over its lifetime? The HU6514 is rated for up to 5,000 estimated lifetime jump starts, making it suitable for fleet operators and plant managers with ongoing heavy-duty starting requirements. Are the jumper cables built in or separate? The jumper cables are integrated into the unit — no separate clamp storage or assembly required, which speeds up deployment in worksite and emergency situations. How is the unit recharged? It recharges via an included 120–240V AC wall charger in approximately 8 hours, or via the 5.5mm 18VDC 2A input or USB-C port for alternative charging sources. What USB and power outputs does the HU6514 have? It features four USB-A ports (5V 2.1A, QC3.0), one USB-C port, two 12V DC auxiliary ports (10A), and one 12V 5.5mm port (3.5A) for broad device charging capability.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Heavy-Duty 2,000 Amp Jump Starter Built for the Biggest Engines on Australian Roads Product Overview The Hulk 4x4 HU6511 is a high-capacity lithium-ion jump starter designed to handle serious engine sizes petrol up to 10.0L and diesel up to 7.0L making it one of the most capable portable jump starters for 4WDs, heavy utes, trucks, and large-displacement vehicles. Its 18,000mAh battery delivers a 2,000A peak current and 1,200A starting current, with enough reserve to power devices and charge laptops and phones between uses. Beyond starting your vehicle, the HU6511 functions as a multi-output portable power station with dual USB ports, DC outputs across 12V, 16V, and 19V, and a 240V AC charger included in the kit. The unit also features a multi-mode LED flashlight with solid, SOS, and strobe functions, and ships in an EVA protective carry case with everything needed to charge, clamp, and get moving. Features & Benefits 2,000A peak / 1,200A starting current — rated to start petrol engines up to 10.0L and diesel engines up to 7.0L, covering the biggest rigs, 4WDs, and commercial vehicles you're likely to encounter on Australian roads Spark-proof, reverse polarity clamps — safer connection under the bonnet, especially in low light or awkward engine bays Multi-voltage DC output (12V / 16V / 19V) — powers or charges laptops and other DC devices in the field without needing mains power 240V AC charger, car charger adaptor, and 4-in-1 USB cable included — covers nearly every charging scenario from home to remote Laptop adaptor harness included — makes this a genuinely useful touring and work tool beyond jump-starting Multi-function LED display — shows charge level and current levels at a glance before attempting a start Multi-mode LED flashlight (solid/SOS/strobe) — useful for roadside breakdowns, camp use, or emergencies Black and grey rubberised housing — built for rough storage in ute trays, toolboxes, and under seats EVA protective carry case — keeps the unit, clamps, and cables organised and protected Technical Specs Specification Detail Battery type Lithium-ion Battery capacity 18,000mAh Starting current 1,200A Peak current 2,000A Charging time 5–6 hours Input 18V 1.5A (USB) USB output 5V 2.1A DC output 12V / 16V / 19V at 3.5A DC outlets 12V 4A and 19V 3.5A Dual USB ports Yes Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +60°C Dimensions 193mm (L) x 116mm (W) x 40mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 10.0L engine capacity Diesel vehicles up to 7.0L engine capacity Laptops and DC-powered devices via 12V/16V/19V outputs and included laptop adaptor harness USB and USB-C chargeable devices (phones, tablets, cameras) 4WD, truck, and touring setups requiring high-current emergency starting capability Weight 2.22kg (shipping weight including packaging) Frequently Asked Questions Will this start a large diesel 4WD or truck? Yes — it's rated for diesel engines up to 7.0L and petrol up to 10.0L, making it suitable for most heavy 4WDs, utes, and light commercial vehicles. Can I charge my laptop with this unit? Yes, it includes a laptop adaptor harness and DC outputs at 12V, 16V, and 19V (3.5A), covering most laptop charging requirements without needing mains power. What charging accessories are included? The kit includes a 240V AC charger, a car charger adaptor, a 4-in-1 USB charging cable, spark-proof clamps, and an EVA protective carry case. How long does the unit take to fully charge? Expect 5–6 hours from flat to full charge using the included 240V AC charger or car charger adaptor. Is the HU6511 safe to use if I connect the clamps incorrectly? Yes — the clamps are spark-proof with reverse polarity protection, and the unit includes short circuit, over-discharge, and overheat protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Enerdrive EN3DC100 12V 100A DC-DC Battery Charger with MPPT Solar and Alternator Inputs Fast charge your batteries with the Enerdrive 12V 100A DC-DC Charger — a high-output dual-input charging solution combining up to 100A alternator input and 80A MPPT solar charging with intelligent multi-stage algorithms and a fully programmable remote LCD display. Product Overview The Enerdrive EN3DC100 is a professional-grade 12V 100A DC-DC battery charger engineered for high-demand systems across vehicles, trucks, caravans, motorhomes, and marine vessels equipped with large alternators. With two totally independent DC inputs — one for alternator charging and one for MPPT solar — the EN3DC100 can draw power from either source to charge a single house battery bank output, delivering up to 100A via the alternator or up to 80A from solar panels. Designed specifically for large 4WDs, utes, trucks, and marine applications with high-output alternators (12V, 180A+), the EN3DC100 is not a standard fit-and-forget charger — it is a high-output system component. Consulting your vehicle or engine handbook, or your dealer, is recommended before installation to confirm alternator compatibility. The default 100A output current is user-adjustable in 10A increments from 10A to 100A, allowing the unit to be configured for the vehicle's alternator capability. Four-stage charging (Test, Bulk, Absorption, Float) with multi-stage algorithms optimises charge speed and battery longevity across compatible battery chemistries including Lithium, AGM, Gel, Flooded, and Program battery types. The included remote LCD display provides full system monitoring and control without accessing the unit directly. Features & Benefits Ultra-fast charging delivers up to 100A from the alternator input or up to 80A from the dedicated MPPT solar input, making the EN3DC100 one of the highest-output DC-DC chargers in its class. For large battery banks in serious off-grid, marine, or commercial applications, this level of output significantly reduces charge times compared to lower-rated alternatives. The two totally independent DC inputs allow the alternator and solar inputs to operate simultaneously, with the unit intelligently managing both sources to charge the single house battery bank output. The dedicated MPPT solar regulator tracks maximum power point at greater than 98% efficiency, extracting the maximum available energy from the connected solar PV array regardless of conditions. Smart charging automatically monitors and regulates output to match the battery's specific requirements at each stage of charge. The output current is user-adjustable in 10A steps from 10A to 100A, providing flexibility for vehicles with smaller alternators or applications requiring a reduced charge rate. Four-stage charging — Test, Bulk, Absorption, and Float — ensures batteries charge quickly and are maintained correctly to extend service life. Fan cooling via forced air ventilation maintains consistent high output in elevated ambient temperatures, preventing thermal throttling during demanding charging sessions. The IP32 ingress protection rating is suited to cool, dry mounting locations away from direct moisture exposure. The included remote LCD display provides backlit readout of voltage, current, status, and error information, with CANBUS communication to the main unit. An optional battery temperature sensor port (RJ12) is available for temperature-compensated charging. Protection features cover reverse battery, short circuit, overcharge, and over-temperature conditions. Technical Specs Specification Detail SKU EN3DC100 Output Current (Max) 100A Output Voltage 12V DC Nominal Output Voltage Range (Bulk) 13.8–14.8Vdc Output Voltage Range (Float) 13.0–13.8Vdc Output Voltage Range (Equalise — Flooded only) 15.5Vdc Charger Output Current (Selectable) 10A–100A (in 10A increments) Equalise Charging Current 10% of Bulk current setting Charging Stages 4 — Test / Bulk / Absorption / Float DC Output Bank 1 (House Battery) Compatible Battery Types Gel, AGM, Flooded, Lithium, Program (Equalisation for Flooded) Efficiency >95% Standby Draw (House Battery, Unit ON) <600mA Standby Draw (House Battery, Unit OFF) <1mA Minimum House Battery Voltage 8.0Vdc Solar Input Voltage Range (CH2) 14.5–55Vdc / 80A Max Solar Input Power (12V Panels) 1200W Max Solar Input Power (24V Panels) 2000W Max (55V max) MPPT Tracking Efficiency >98% Alternator Input Voltage Range (CH3) 10.5–16Vdc / 135A Max Startup Voltage (with ignition sense COM1) 11.7–12.6Vdc Startup Voltage (without ignition sense COM1) >12.7Vdc Maximum Input Current (Alternator) 100A Remote Display Backlit LED, 100 x 100mm, 0.4kg Remote Display Communication CANBUS Remote Display Port RJ12 Battery Temperature Sensor Port RJ12 (optional) Ingress Protection IP32 Cooling Forced Air Ventilation (Fan Cooled) DC Output Protection Reverse Battery, Short Circuit, Over Charge, Over Temperature Operating Temperature Range -20°C to 40°C Storage Temperature Range -40°C to 70°C Dimensions 356 x 205 x 97mm Weight 3.23kg Remote Display Weight 0.4kg Warranty 5 Years Goes Well With Enerdrive Solar Panels (12V or 24V) to maximise the MPPT solar input up to 1200W (12V) or 2000W (24V) Enerdrive or compatible lithium and AGM house battery banks for the highest charge throughput benefit Enerdrive Battery Temperature Sensor (RJ12) for temperature-compensated charging in variable ambient conditions Enerdrive or compatible battery monitors for full system visibility alongside the remote display Frequently Asked Questions Is the EN3DC100 suitable for all vehicles? The EN3DC100 is designed for large 4WDs, utes, trucks, and marine applications with high-output alternators (12V, 180A+). It is not intended for standard passenger vehicles with small alternators. Consulting your vehicle or engine handbook or your dealer before installation is strongly recommended to confirm alternator compatibility and avoid overloading your charging system. Can both the alternator and solar inputs be used at the same time? Yes. The EN3DC100 features two totally independent DC inputs — one for the alternator and one for MPPT solar — that can operate simultaneously to charge the single house battery bank output. The unit intelligently manages both sources for optimal charging. What battery types are compatible with the EN3DC100? The EN3DC100 supports Gel, AGM, Flooded, Lithium, and Program battery types. Flooded batteries also support equalisation charging. The selectable battery type setting allows the charging algorithm to be optimised for the specific chemistry in your house battery bank. Can the 100A output current be reduced for smaller alternators? Yes. The default 100A charging current can be stepped down in 10A increments to a minimum of 10A, allowing the unit to be configured to suit the rated output of your vehicle's alternator. This ensures the charger does not overload the alternator during operation. What does IP32 ingress protection mean for installation planning? IP32 indicates the EN3DC100 is protected against solid objects greater than 2.5mm and dripping water at up to 15 degrees from vertical. It is rated for installation in cool, dry locations such as enclosed storage areas, under-seat compartments, or dedicated electrical enclosures — not for direct exposure to rain, spray, or high-humidity environments.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CTEK M25 25A Marine Charger - Professional High-Power Marine Battery Charger with Temperature Compensation and Lithium Compatibility Professional high-power 25 amp marine battery charger engineered specifically for boat owners requiring quick effective charging of larger service batteries, house battery banks, and demanding marine electrical systems. The CTEK M25 delivers powerful 25A charging current enabling rapid charging of substantial marine battery installations from 40-500Ah capacity significantly reducing charging time compared to lower-current chargers and ensuring boats remain ready for immediate use after shore power charging or generator operation. Advanced temperature compensation technology continuously monitors ambient temperature and automatically adjusts charging parameters optimizing charge acceptance and battery health when temperature deviates from ideal 25°C conditions, critical capability for marine environments experiencing wide temperature variations from cold morning departures through hot afternoon sun exposure or seasonal operation from winter through summer conditions. Dedicated lithium battery mode supports modern LiFePO4 (lithium iron phosphate) batteries increasingly popular in marine applications for their superior energy density, cycle life, and performance characteristics, making M25 suitable for both traditional lead-acid and contemporary lithium battery installations. Integrated Recond mode employs advanced reconditioning techniques restoring performance of deeply discharged wet cell and calcium-calcium batteries common in marine service battery applications recovering seemingly depleted batteries and maximizing return on substantial marine battery investments. Marine-optimized design includes extended 4-meter cable with M10 eyelet terminals facilitating permanent installation in boats where battery banks often locate distant from shore power connection points or charging locations, eliminating need for extension cables or cable modifications during installation. Perfect for cruising sailboats with large house battery banks, motor yachts with substantial electrical demands, liveaboard vessels requiring reliable battery charging infrastructure, sportfishing boats with extensive electronics and refrigeration systems, or any marine application where fast reliable charging of larger battery installations is essential for operational readiness and electrical system performance. Manufactured by CTEK, global leader in battery charging technology with extensive marine charging expertise ensuring Swedish engineering quality, marine environment durability, and reliability appropriate for demanding saltwater applications where equipment failures can compromise safety and vessel operations. Product Overview The CTEK M25 addresses specific challenges in marine battery charging where larger service battery banks, temperature variations, diverse battery chemistries, and installation requirements demand purpose-designed marine charging solution beyond basic automotive chargers adapted for boat use. Marine service batteries typically range 200-500Ah capacity supporting substantial electrical loads including refrigeration, lighting, electronics, communications equipment, entertainment systems, and various onboard systems operating during anchoring or mooring when engine alternator charging unavailable. These large capacity battery banks require substantial charging current for reasonable charging times - 25 amp capability enables charging 200Ah battery bank from 50% discharge in approximately 4-6 hours compared to 12-18 hours with common 7-8 amp chargers, critical difference when shore power access limited or generator runtime considerations important. Marine environments experience significant temperature variations affecting battery performance and charge acceptance from cool morning temperatures potentially below 10°C through midday cabin temperatures exceeding 40°C in tropical climates or enclosed engine rooms - temperature compensation ensures optimal charging parameters throughout these variations maintaining charging effectiveness and protecting battery longevity. The inclusion of lithium battery mode recognizes increasing adoption of LiFePO4 batteries in marine applications where weight savings, cycle life advantages, and performance characteristics justify premium investment for serious cruising vessels, making M25 future-compatible with evolving marine battery technology trends. Key Features and Benefits Powerful 25A Fast Charging Current – High 25 amp charging capability enables rapid charging of large marine service battery banks from 40-500Ah capacity significantly reducing time to full charge compared to lower-current alternatives. Fast charging particularly valuable in marina situations where shore power time may be limited by slip rental terms, transient docking charges by hour, or departure schedules requiring prompt battery replenishment. Twenty-five amp output brings substantially depleted 300Ah house battery bank to full charge overnight or during day while boat occupied for provisioning and trip preparation, versus multiple days required with inadequate charging current. High current also supports bulk charging phase where batteries accept maximum current enabling efficient energy transfer during period of highest charge acceptance. Integrated Temperature Compensation – Advanced temperature sensor continuously monitors ambient temperature and automatically adjusts charging voltage compensating for temperature effects on battery chemistry and charge acceptance. Cold batteries require higher charging voltage for complete charging as chemical reactions slow at low temperatures, while warm batteries need reduced voltage preventing overcharging and excessive gassing as reactions accelerate. Temperature compensation ensures optimal charging throughout seasonal operation from winter boating in cool conditions through summer operation in hot climates, or daily variations from cool morning charging through warm afternoon temperatures. Proper temperature-adjusted charging maximizes battery capacity, prevents sulfation in undercharged batteries, and avoids overcharge damage in warm conditions extending battery service life significantly. Dedicated Lithium Battery Mode – Specialized charging profile specifically designed for 12V LiFePO4 (lithium iron phosphate) batteries supporting modern lithium installations in recreational and cruising vessels. Lithium mode provides appropriate charging voltage (typically 14.4-14.6V), proper current management, and algorithm suitable for lithium battery management system (BMS) operation ensuring safe effective charging without triggering BMS protection shutdowns common when using lead-acid chargers on lithium batteries. Lithium compatibility makes M25 future-proof investment supporting battery technology upgrades without requiring charger replacement, or supporting mixed battery systems where both lithium and lead-acid batteries exist in vessel electrical system during transition period. Recond Mode for Battery Recovery – Dedicated reconditioning program restores performance of deeply discharged wet cell and calcium-calcium batteries through controlled high-voltage pulse charging breaking down sulfation and conditioning battery plates. Marine service batteries frequently subjected to deep discharge cycles during extended anchoring, multi-day passages, or winter storage periods where reconditioning capability recovers battery capacity avoiding premature replacement of expensive marine battery banks. Calcium-calcium (Ca/Ca) battery support particularly important as many modern marine batteries use calcium-alloy grids for improved performance, and these batteries benefit from specialized reconditioning addressing their specific chemistry requirements. Successful reconditioning often recovers 20-40% capacity in degraded batteries extending service life multiple seasons. Marine-Optimized 4 Meter Cable with M10 Eyelets – Extended 4-meter (13 feet) cable length accommodates typical marine battery installation locations often distant from shore power connections or preferred charger mounting locations. Length eliminates need for extension cables, intermediate connections, or cable modifications maintaining optimal electrical connection quality and reducing voltage drop between charger and batteries. M10 eyelet terminals provide secure permanent connection to battery terminals appropriate for marine vibration environment and enabling clean professional installation. Eyelet connections superior to temporary clamps for permanent shore power charging installations providing consistent connection quality, preventing accidental disconnection, and maintaining reliable electrical contact throughout charging cycles and vessel operation. Multi-Stage Automatic Charging Algorithm – Sophisticated automatic charging process manages entire charge cycle from initial battery assessment through long-term maintenance without user intervention beyond connection and mode selection. Multi-stage charging includes desulfation conditioning, bulk charging at maximum current, absorption charging bringing batteries to 100% capacity, analysis verifying battery health, and float maintenance for long-term connection during slip storage or between outings. Automatic operation eliminates charging complexity and user error enabling confident effective charging by boat owners regardless of technical expertise while ensuring professional-grade charging quality protecting valuable marine battery investments. 40-500Ah Capacity Range – Broad capacity range covers diverse marine battery installations from modest 40-60Ah engine start batteries and small auxiliary battery systems through substantial 300-500Ah house battery banks common in cruising sailboats, trawlers, and larger powerboats. Single charger handles everything from weekend coastal cruiser with moderate electrical needs through serious offshore cruising vessel with extensive electrical system demands. Wide capacity range also supports maintenance charging of smaller batteries or bulk charging of very large installations making M25 versatile solution for mixed battery configurations often found in marine applications with separate engine start batteries, house battery banks, and auxiliary battery systems. Professional Marine-Grade Construction – Rugged construction with appropriate environmental protection withstands harsh marine environments including humidity exposure, salt air corrosion potential, temperature variations, vibration from vessel operation and wave action, and general durability requirements for equipment permanently installed in boats. While not submersion-rated, marine-grade construction handles typical boating environment exposure ensuring reliable long-term operation in conditions that would degrade consumer-grade chargers designed for benign automotive garage environments. Professional quality appropriate for critical marine electrical infrastructure where charger failure could leave vessel without power in remote anchorages or compromise electrical system during extended cruising. Technical Specifications Specification Details Model M25 SKU CTM25 Product Type High-Power Marine Battery Charger Brand CTEK (Swedish Engineering) Charging Current 25 Amps (Maximum) System Voltage 12V DC Battery Capacity Range 40-500Ah Battery Types Lead-Acid (Wet, AGM, Gel, Ca/Ca), Lithium (LiFePO4) Temperature Compensation Yes (Automatic) Reference Temperature 25°C (Compensates for Deviations) Lithium Mode Yes (12V LiFePO4, Li-Fe, Li-iron, LFP) Recond Mode Yes (Wet and Ca/Ca Batteries) Charging Algorithm Multi-Stage Fully Automatic Cable Length 4 Meters (13 feet) Connection Type M10 Eyelet Terminals Typical Applications Marine Service Batteries, House Battery Banks, Cruising Vessels, Motor Yachts, Sailboats Environmental Design Marine-Grade Construction Safety Features Spark-Proof, Reverse-Polarity Protected, Overcharge Protected User Interface Automatic with Mode Selection Installation Permanent Marine Installation Warranty Per CTEK Warranty Policy Manufacturing Origin Swedish Engineering (CTEK) Frequently Asked Questions Q: Can the M25 charge multiple batteries connected in parallel or only single batteries? A: Yes, the M25 can charge multiple 12V batteries connected in parallel as they electrically function as single larger capacity battery. For example, two 200Ah batteries in parallel create 400Ah system charged as single unit. This is common configuration in marine house battery banks where multiple 6V batteries in series/parallel or multiple 12V batteries in parallel create desired capacity. Ensure total parallel battery bank capacity falls within M25's 40-500Ah range for optimal charging. Note: M25 charges 12V systems only - it cannot charge 24V systems created by series-connected 12V batteries. For 24V systems, different charger required, or batteries must be disconnected from series configuration and charged individually as 12V batteries. Q: How does temperature compensation actually work and why is it important? A: Temperature sensor monitors ambient temperature near batteries and automatically adjusts charging voltage based on temperature deviation from reference 25°C. For every degree Celsius above 25°C, charging voltage typically reduces by approximately 0.03V (varies by algorithm) preventing overcharging in warm conditions. Conversely, below 25°C, voltage increases compensating for slower chemical reactions at low temperatures ensuring complete charging. Without compensation, batteries charged at 10°C with room-temperature voltage settings may reach only 80-90% capacity (sulfation risk), while batteries charged at 40°C may experience overcharging causing gassing, electrolyte loss, and potential thermal damage. Temperature compensation maintains optimal charging throughout 0-40°C typical marine operating range maximizing battery health and performance across all conditions. Q: What's the difference between wet cell and Ca/Ca batteries, and why do they need Recond mode? A: Wet cell (flooded lead-acid) batteries use traditional lead-antimony or lead-calcium grids with liquid electrolyte requiring occasional water addition. Ca/Ca (calcium-calcium) batteries use calcium-alloy positive and negative grids in sealed construction marketed as maintenance-free, low self-discharge batteries popular in marine applications. Both battery types can develop lead sulfate crystallization during deep discharge or storage reducing capacity and performance. Recond mode uses controlled high-voltage pulses (typically 15.8-16V) breaking down sulfate crystals and reconditioning plates restoring capacity. Ca/Ca batteries particularly benefit from specific reconditioning addressing their chemistry characteristics. AGM and gel batteries typically don't benefit as much from reconditioning due to their different construction and failure modes, though attempting reconditioning on these types is safe and charger will determine if effective. Q: Can I leave the M25 connected permanently at my marina slip for continuous maintenance? A: Yes, the M25 is designed for permanent connection with long-term maintenance capability ideal for marina slip installations. After completing initial charge cycle, charger automatically enters maintenance mode providing optimal maintenance voltage preventing self-discharge without overcharging. Permanent connection keeps batteries fully charged and maintained during weeks or months between boat use preventing sulfation, maintaining capacity, and ensuring vessel electrical systems ready for immediate use. The 4-meter cable with eyelet connections specifically designed for permanent installation rather than temporary charging. Many boat owners install M25 permanently at slip with shore power connection enabling automatic battery maintenance whenever shore power connected. This maintenance capability extends battery life significantly compared to allowing batteries to sit discharged between outings causing sulfation damage. Q: Should I use lithium mode or lead-acid mode if I have both battery types on my boat? A: If your boat has both lithium and lead-acid batteries, you need to choose which battery type to charge as M25 can only charge one chemistry at a time with single mode selection. Common solutions include: installing separate dedicated chargers for each battery chemistry (preferred for mixed systems with substantial capacity in both types), prioritizing lithium batteries with M25 in lithium mode and using separate charger for lead-acid, or using M25 primarily for largest/most critical battery bank with alternative charging for other batteries. For vessels transitioning from lead-acid to lithium, you might temporarily have mixed system during transition period. The safest approach for mixed chemistry systems is separate dedicated chargers ensuring each battery type receives appropriate charging profile maximizing performance and longevity for both investments. Consult with marine electrical specialist about optimal configuration for your specific mixed battery installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CTEK M15 15A Marine Charger - Professional Marine Battery Charger with Temperature Compensation and Lithium Compatibility Professional 15 amp marine battery charger engineered specifically for boat owners requiring effective charging of marine service batteries, house battery banks, and diverse marine electrical systems. The CTEK M15 delivers reliable 15A charging current enabling efficient charging of marine battery installations from 28-300Ah capacity providing optimal balance between charging speed and versatility for typical recreational and coastal cruising vessels. Advanced temperature compensation technology continuously monitors ambient temperature and automatically adjusts charging parameters optimizing charge acceptance and battery health when temperature deviates from ideal 25°C conditions, essential capability for marine environments experiencing wide temperature variations from cool morning departures through hot afternoon sun exposure or seasonal operation throughout year-round boating. Dedicated lithium battery mode supports modern LiFePO4 (lithium iron phosphate) batteries increasingly popular in marine applications for their superior energy density, cycle life, and performance characteristics, making M15 suitable for both traditional lead-acid and contemporary lithium battery installations. Integrated Recond mode employs advanced reconditioning techniques restoring performance of deeply discharged wet cell and calcium-calcium batteries common in marine service battery applications recovering seemingly depleted batteries and maximizing return on marine battery investments. Marine-optimized design includes extended 4-meter cable with M10 eyelet terminals facilitating permanent installation in boats where battery banks often locate distant from shore power connection points or charging locations, eliminating need for extension cables during installation. Perfect for coastal cruising sailboats, small to medium powerboats, fishing boats with moderate electrical demands, weekend recreational vessels, or any marine application where reliable effective charging of medium-capacity battery installations is essential for operational readiness. Manufactured by CTEK, global leader in battery charging technology with extensive marine charging expertise ensuring Swedish engineering quality, marine environment durability, and reliability appropriate for demanding saltwater applications. Product Overview The CTEK M15 addresses marine battery charging requirements for recreational boaters and coastal cruisers where medium-capacity service battery banks require reliable effective charging without the size, cost, or power demands of higher-current professional marine chargers. Marine service batteries in typical recreational vessels range 80-200Ah capacity supporting electrical loads including navigation electronics, cabin lighting, VHF radio, stereo systems, and moderate refrigeration during weekend outings or multi-day coastal cruising. The 15 amp charging capability provides effective charging for these medium-capacity installations - a 150Ah battery bank discharged to 50% capacity recharges in approximately 5-7 hours enabling overnight shore power charging between weekend trips or daily charging during extended cruising with shore power access. Marine environments present unique charging challenges with temperature variations from cool pre-dawn departures through hot afternoon cabin temperatures, and seasonal operation from spring through fall in temperate climates or year-round in tropical regions - temperature compensation ensures optimal charging parameters throughout these variations maintaining charging effectiveness and protecting battery longevity. The inclusion of lithium battery mode recognizes growing adoption of LiFePO4 batteries in recreational marine applications where weight savings and performance advantages justify investment for serious cruising vessels, making M15 compatible with evolving marine battery technology. Key Features and Benefits Effective 15A Charging Current – Reliable 15 amp charging capability enables efficient charging of marine service battery banks from 28-300Ah capacity providing optimal balance between charging speed and charger size appropriate for typical recreational vessels. Fifteen amp output charges common 100-150Ah house battery banks overnight or during day while boat used for activities, provisioning, or maintenance. Current capacity handles bulk charging phase where batteries accept maximum current enabling efficient energy transfer during period of highest charge acceptance. Moderate charging current appropriate for boats with standard shore power connections (15-20 amp) without overloading marina electrical infrastructure or requiring specialized high-current shore power installations. Integrated Temperature Compensation – Advanced temperature sensor continuously monitors ambient temperature and automatically adjusts charging voltage compensating for temperature effects on battery chemistry and charge acceptance. Cold batteries require higher charging voltage for complete charging as chemical reactions slow at low temperatures, while warm batteries need reduced voltage preventing overcharging and excessive gassing as reactions accelerate. Temperature compensation ensures optimal charging throughout seasonal operation from spring commissioning in cool conditions through summer operation in hot climates, or daily variations from cool morning charging through warm afternoon temperatures in enclosed battery compartments. Proper temperature-adjusted charging maximizes battery capacity and extends battery service life significantly. Dedicated Lithium Battery Mode – Specialized charging profile specifically designed for 12V LiFePO4 (lithium iron phosphate) batteries supporting modern lithium installations in recreational vessels where weight savings, cycle life, and performance benefits justify lithium battery investment. Lithium mode provides appropriate charging voltage, proper current management, and algorithm suitable for lithium battery management system (BMS) operation ensuring safe effective charging without triggering BMS protection shutdowns. Lithium compatibility makes M15 future-proof investment supporting battery technology upgrades without requiring charger replacement as boaters transition from traditional lead-acid to lithium battery systems. Recond Mode for Battery Recovery – Dedicated reconditioning program restores performance of deeply discharged wet cell and calcium-calcium batteries through controlled high-voltage pulse charging breaking down sulfation and conditioning battery plates. Marine service batteries frequently subjected to deep discharge cycles during extended weekends at anchor, multi-day trips, or winter storage periods where reconditioning capability recovers battery capacity avoiding premature replacement of marine battery banks. Calcium-calcium (Ca/Ca) battery support particularly important as many modern marine batteries use calcium-alloy grids, and these batteries benefit from specialized reconditioning addressing their specific chemistry requirements. Successful reconditioning often recovers significant capacity in seasonal batteries subjected to storage-related degradation. Marine-Optimized 4 Meter Cable with M10 Eyelets – Extended 4-meter (13 feet) cable length accommodates typical marine battery installation locations often distant from shore power connections or preferred charger mounting locations in cabin, cockpit locker, or electrical panel areas. Length eliminates need for extension cables or intermediate connections maintaining optimal electrical connection quality. M10 eyelet terminals provide secure permanent connection to battery terminals appropriate for marine vibration environment enabling clean professional installation. Eyelet connections superior to temporary clamps for permanent shore power charging installations providing consistent connection quality and maintaining reliable electrical contact throughout charging cycles. Multi-Stage Automatic Charging Algorithm – Sophisticated automatic charging process manages entire charge cycle from initial battery assessment through long-term maintenance without user intervention beyond connection and mode selection. Multi-stage charging includes desulfation conditioning, bulk charging at maximum current, absorption charging bringing batteries to 100% capacity, analysis verifying battery health, and float maintenance for long-term connection during slip storage. Automatic operation eliminates charging complexity enabling confident effective charging by recreational boat owners regardless of technical expertise while ensuring professional-grade charging quality protecting marine battery investments. 28-300Ah Capacity Range – Appropriate capacity range covers typical recreational marine battery installations from modest 40-80Ah engine start batteries and small auxiliary systems through 200-300Ah house battery banks common in coastal cruising sailboats and medium powerboats. Single charger handles weekend coastal cruiser with moderate electrical needs through more substantial installations supporting extended cruising with electronics, lighting, and moderate refrigeration. Capacity range well-matched to boats with standard 15-20 amp shore power connections where 15A charging current fully utilizes available shore power without requiring specialized high-current marina infrastructure. Professional Marine-Grade Construction – Rugged construction with appropriate environmental protection withstands marine environments including humidity exposure, salt air, temperature variations, vibration from vessel operation, and durability requirements for equipment in boats. Marine-grade construction handles typical boating environment ensuring reliable operation in conditions that would degrade consumer-grade automotive chargers. Professional quality appropriate for marine electrical infrastructure where charger reliability essential for maintaining battery health and electrical system readiness throughout boating season and during winter storage periods. Technical Specifications Specification Details Model M15 SKU CTM15 (40-188) Product Type Marine Battery Charger Brand CTEK (Swedish Engineering) Charging Current 15 Amps (Maximum) System Voltage 12V DC Battery Capacity Range 28-300Ah Battery Types Lead-Acid (Wet, AGM, Gel, Ca/Ca), Lithium (LiFePO4) Temperature Compensation Yes (Automatic) Reference Temperature 25°C (Compensates for Deviations) Lithium Mode Yes (12V LiFePO4, Li-Fe, Li-iron, LFP) Recond Mode Yes (Wet and Ca/Ca Batteries) Charging Algorithm Multi-Stage Fully Automatic Cable Length 4 Meters (13 feet) Connection Type M10 Eyelet Terminals Typical Applications Marine Service Batteries, House Battery Banks, Coastal Cruising, Recreational Vessels Environmental Design Marine-Grade Construction Safety Features Spark-Proof, Reverse-Polarity Protected, Overcharge Protected User Interface Automatic with Mode Selection Installation Permanent Marine Installation Warranty Per CTEK Warranty Policy Manufacturing Origin Swedish Engineering (CTEK) Frequently Asked Questions Q: What's the difference between the M15 and M25 marine chargers? A: The primary difference is charging current - M15 delivers 15 amps while M25 delivers 25 amps. The M15 is optimized for battery banks 28-300Ah while M25 handles 40-500Ah. For typical recreational boats with 80-150Ah house battery banks, the M15 provides adequate charging speed with overnight charging restoring batteries between weekend trips. The M25 charges faster, beneficial for larger battery banks in cruising vessels, liveaboards, or boats with extensive electrical demands requiring quicker turnaround. Both include identical features (temperature compensation, lithium mode, Recond mode, 4m cable). For weekend coastal cruisers and typical recreational powerboats or sailboats, M15 provides excellent capability at lower cost. For larger vessels, extended cruising, or boats with 250Ah+ battery banks, M25's faster charging justifies higher investment. Q: Can I charge my boat while it's in the water at my marina slip? A: Yes, the M15 is specifically designed for permanent installation at marina slips enabling battery charging and maintenance while boat remains in water. Connect M15 to boat batteries using permanent eyelet terminal installation, mount charger in protected location (cabin, cockpit locker, or electrical compartment), and plug charger into shore power whenever at slip. Charger automatically manages battery charging and long-term maintenance keeping batteries fully charged and conditioned between outings. This permanent installation approach is standard practice at marinas worldwide and exactly what M15 designed for with marine-grade construction, long cable for typical boat battery locations, and automatic maintenance capability. Ensure charger mounting location provides reasonable protection from direct weather exposure though marine-grade construction handles typical boating environment humidity and temperature conditions. Q: Do I need temperature compensation in my climate? A: Yes, temperature compensation benefits boats in all climates. Even in relatively stable temperate climates, temperatures vary significantly between cool spring commissioning (10-15°C), hot summer afternoons in enclosed cabins or engine rooms (35-40°C), and fall storage preparation. Tropical boaters experience consistently warm temperatures requiring voltage reduction preventing overcharging, while northern boaters face cool spring/fall conditions requiring voltage increase ensuring complete charging. Without compensation, batteries may receive incorrect charging voltage by 0.3-0.6V depending on temperature deviation - seemingly small difference but significant impact on charging effectiveness, battery health, and service life. Temperature compensation automatically handles these variations ensuring optimal charging year-round and throughout daily temperature swings typical in boats where battery compartments heat during day and cool overnight. Q: Should I disconnect my batteries from boat electrical system during charging? A: No, the M15 can safely charge batteries while they remain connected to boat electrical system. Modern CTEK marine chargers provide clean low-ripple power output safe for sensitive marine electronics like chartplotters, VHF radios, and fish finders even while charging. Keeping batteries connected enables charger to simultaneously charge batteries and power any small parasitic loads (bilge pump float switches, CO/LPG detectors, clock/memory functions) common in boats. However, during charging, avoid operating high-draw equipment like electric windlass, bow thrusters, or inverters as these loads interfere with charging process and may exceed charger capacity. For normal battery charging and maintenance at dock, leave systems connected allowing charger to maintain batteries while supporting essential boat electrical functions. Q: Can I use the M15 for my RV or caravan batteries or is it only for boats? A: While marketed as marine charger, the M15 works excellently for RV, caravan, and other recreational vehicle applications with appropriate battery sizes. The marine designation indicates rugged construction, temperature compensation useful in all outdoor applications, and features valuable for any seasonal recreational equipment. Many RV and caravan owners choose marine-grade CTEK chargers for superior environmental protection, temperature compensation capability, and professional reliability. The 4-meter cable with eyelet connections works well for permanent RV installations where batteries may locate in forward compartments distant from shore power connections. If your RV/caravan has 80-250Ah battery capacity and you want professional-grade charger with temperature compensation and lithium capability, M15 is excellent choice regardless of whether application is marine or terrestrial recreational vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX6514/50 In Line Midi Fuse Holder 1 Way 250A Trade Pack of 50 The OEX ACX6514/50 is the trade pack version of the ACX6514 inline midi fuse holder, supplied in a box of 50 units. Each holder is rated to 250A maximum with a 1 to 32V voltage rating, stainless steel studs and a temperature range of -40°C to +120°C. Compatible with the ACX6513 mounting bracket, sold separately. Covered by a 12-month warranty. Product overview The ACX6514/50 delivers the same SF30 type midi fuse holder as the single-unit ACX6514, packaged in a 50-piece trade box for workshops, auto electricians and trade buyers who regularly install high-current inline fusing. The 250A maximum current rating suits main battery cables, high-current amplifier feeds, winch circuits and heavy accessory installations across 12V and 24V systems. Stainless steel studs provide corrosion resistance across a broad range of installation environments, and the wide operating temperature of -40°C to +120°C covers underbonnet, cab and cold climate applications. The 30mm mount centre-to-centre spacing is compatible with the OEX ACX6513 mounting bracket for secure panel or chassis mounting. Features and benefits Trade pack of 50: Fifty units per box reduces per-unit cost for workshops and trade buyers with regular high-current fusing requirements. 250A maximum current rating: Rated to 250A maximum, suited to main battery feeds, winch circuits, high-current amplifier runs and heavy accessory installations. 1 to 32V voltage rating: Compatible with both 12V and 24V vehicle electrical systems. Stainless steel studs: Corrosion-resistant stainless steel studs maintain connection integrity in demanding installation environments. Wide temperature range: Rated from -40°C to +120°C, suitable for underbonnet installation and cold climate use. 30mm mount centre-to-centre: Compatible with the OEX ACX6513 mounting bracket (sold separately) for secure chassis or panel mounting. SF30 type midi fuse holder: Accepts standard SF30 midi fuses, widely available in common amperages. 12-month warranty: Each unit is covered by a 12-month OEX warranty. Technical specs Specification Detail SKU ACX6514/50 Brand OEX Type SF30 In Line Midi Fuse Holder Configuration 1 Way Maximum Current 250A Voltage Rating 1–32V Stud Material Stainless steel Mount Centre to Centre 30mm Temperature Range -40°C to +120°C Circuits 1 Pack Quantity 50 Warranty 12 months Sold As Box of 50 Frequently asked questions What is the difference between the ACX6514 and the ACX6514/50? The ACX6514 and ACX6514/50 are the same inline midi fuse holder. The ACX6514 is sold individually, while the ACX6514/50 is a trade pack of 50 units. All specifications are identical. What fuse type does the ACX6514/50 accept? The ACX6514/50 is an SF30 type midi fuse holder. It accepts standard midi fuses. Confirm the amperage rating of your chosen midi fuse suits your circuit before installing. Can the ACX6514/50 be used in a 24V system? Yes. The voltage rating of 1 to 32V covers both 12V and 24V vehicle electrical systems. What is the ACX6513 mounting bracket and is it included? The ACX6513 is an OEX mounting bracket designed to securely mount the fuse holder to a panel or chassis surface. It is sold separately and is not included in this pack. Contact us to add the ACX6513 to your order. Is the ACX6514/50 suitable for underbonnet installation? Yes. The temperature rating of -40°C to +120°C and stainless steel stud construction make each unit in this pack suited to underbonnet environments. Ensure the fuse holder is positioned away from direct heat sources and moving components. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Direct connection from ring terminals to Anderson power Product Overview The Narva 81068BL adapter cable bridges the gap between traditional 8mm ring terminal connections and modern 50A Anderson plug systems. This purpose-built adapter eliminates the need for rewiring or terminal replacement, making it ideal for connecting battery banks, solar setups, portable fridges, or auxiliary power systems to Anderson-compatible equipment. Built to Narva's exacting standards, the 81068BL handles serious current loads across 12V and 24V applications, from dual battery systems in 4WDs to caravan solar arrays and workshop power distribution. The 8mm ring terminal end provides a secure mechanical connection to battery posts, busbars, or distribution blocks, while the 50A Anderson plug delivers the reliable, weather-resistant connection that's become the Australian standard for portable power. Whether you're retrofitting older equipment to work with Anderson systems or building a custom power setup that needs to bridge both connection types, this adapter handles the job without compromising on current capacity or connection integrity. Key Specifications 50A current rating at 12V DC applications 25A current rating at 24V DC applications 8mm ring terminal on input side 50A Anderson plug on output side Manufactured to Narva quality standards 0.105kg unit weight One year manufacturer warranty Features & Benefits High Current Capacity – With 50A at 12V, this adapter handles demanding loads like portable fridges, inverters, and DC-DC chargers without voltage drop issues. The 25A rating at 24V makes it equally capable in truck and heavy equipment applications where higher system voltages are standard. Anderson Plug Compatibility – Connects directly to the 50A Anderson connector system that's become ubiquitous in Australian touring, meaning your existing Anderson-equipped gear works seamlessly with ring terminal connections on batteries, solar controllers, or distribution blocks. Eliminates Rewiring – Instead of cutting cables and fitting new terminals, this adapter preserves your existing ring terminal setup while adding Anderson connectivity. Particularly useful when you've got quality crimped ring terminals you don't want to replace or when working with sealed battery systems where you can't change the terminal type. Dual Voltage Rated – The 12V/24V rating means this adapter works across passenger vehicles, 4WDs, caravans (12V) and trucks, buses, or heavy equipment (24V), making it a versatile solution for workshops and fleets running mixed voltage systems. Secure Ring Terminal Connection – The 8mm ring terminal provides a solid mechanical connection with full 360-degree contact around the stud. Unlike quick-connect terminals that can vibrate loose on corrugations, a properly torqued ring terminal stays put under the harshest Australian off-road conditions. Narva Build Quality – Manufactured to Narva's automotive-grade standards with proper conductor sizing, quality crimps, and Anderson housings that maintain contact pressure even after hundreds of plug cycles. Technical Specs Input connection: 8mm ring terminal (M8 stud size) Output connection: 50A Anderson plug (SB50 style) Maximum current: 50A at 12V DC / 25A at 24V DC Conductor material: Copper Insulation: Automotive-grade Cable length: Standard adapter length (short-form cable) Weight: 0.105kg (105g) Warranty period: 1 year from date of purchase Compatible With / Goes Well With 50A Anderson plug accessories and extensions Dual battery systems with ring terminal connections Portable fridge/freezer units with Anderson input Solar charge controllers with Anderson outputs Battery boxes and trays with ring terminal posts DC-DC battery chargers (Anderson-equipped models) Inverters with Anderson power inputs Workshop battery distribution systems 12V and 24V auxiliary power setups Anderson plug dust covers and cable management accessories Note: Always verify current requirements of your connected equipment stay within adapter ratings. Ring terminal connection requires appropriate M8 stud/post on battery or busbar. Frequently Asked Questions Can I use this adapter for solar panel connections? Yes, this adapter works well for connecting ring terminal battery posts to Anderson-equipped solar controllers, panels, or portable solar blankets, provided your current draw stays within the 50A (12V) or 25A (24V) rating. Will this fit standard car battery terminals? The 8mm ring terminal fits M8 studs commonly found on battery distribution posts, busbars, and some auxiliary battery terminals, but most standard car batteries use larger posts requiring different terminal sizes verify your application before purchasing. Does this maintain the 50A rating along the entire cable? Yes, the entire assembly from ring terminal through to Anderson plug is rated for the full 50A at 12V (25A at 24V), provided both ends are properly connected and torqued to manufacturer specifications. Can I leave this permanently connected outdoors? While the Anderson plug end offers weather resistance, the ring terminal connection should be protected from direct weather exposure and maintained with proper terminal protection spray or dielectric grease for long-term outdoor installations. Is the Anderson plug end removable for other connections? No, this is a fixed adapter cable—the Anderson plug is permanently attached to the ring terminal via the cable assembly, not designed for disassembly or reconfiguration. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX1605 20A Yellow Standard Blade ATS Fuse 19x19mm Pack of 100 The OEX ACX1605 is a 20A standard blade fuse in yellow, supplied in a pack of 100. Measuring 19x19mm, it is the standard ATS/regular blade fuse format used in automotive fuse boxes and inline fuse holders across a wide range of vehicles. The yellow colour coding identifies this as a 20A fuse, following the international automotive fuse colour standard. Also available in a pack of 5 as ACX1605BL. Covered by a one year warranty. Product overview The ACX1605 is a 20A standard blade fuse suited to higher-current accessory and lighting circuits drawing up to 20 amps. The 20A rating matches the current rating of the OEX 5mm single-core automotive cable range, making the ACX1605 the correct fuse pairing for circuits wired with 5mm cable. Typical applications include driving lights, compressors on smaller loads, accessory power feeds and relay-switched circuits where the circuit draw approaches the upper end of the mid-range ratings. The yellow colour follows the international automotive blade fuse colour standard, allowing quick visual identification of the 20A rating when inspecting or replacing fuses. The standard blade format (ATS/regular blade) at 19x19mm fits the majority of vehicle fuse boxes and inline blade fuse holders. The pack of 100 suits trade workshops stocking fuses for servicing, installations and general auto electrical work. For lower-volume requirements, the ACX1605BL pack of 5 is available. Features and benefits 20A rating: Higher-current circuit protection for driving lights, compressors, accessory power feeds and relay-switched circuits drawing up to 20 amps. Standard blade ATS fuse format: The most common automotive fuse type, fitting the majority of vehicle fuse boxes and inline blade fuse holders. Yellow colour coding: Identifies the 20A rating at a glance per the international automotive blade fuse colour coding standard, assisting with quick fuse identification and replacement. 19x19mm standard dimensions: Standard ATS blade fuse sizing, compatible with fuse boxes and holders designed for the regular blade format. Pack of 100: Trade-friendly quantity for workshop stock covering servicing, installations and general auto electrical work. Also available in pack of 5: The ACX1605BL is the same 20A yellow standard blade fuse in a pack of 5 for lower-volume requirements. One year warranty: Covered by a one year OEX warranty. Technical specs Specification Detail SKU ACX1605 Brand OEX Fuse Type Standard Blade (ATS) Amp Rating 20A Colour Yellow Dimensions 19x19mm Pack Quantity 100 Weight 0.178kg Warranty One year Sold As Pack of 100 Frequently asked questions What is a standard blade fuse? A standard blade fuse, also known as ATS or regular blade, is the most common automotive fuse type. It has a flat plastic body with two metal prongs that plug into a fuse box or inline holder. The fuse element inside blows when current exceeds the rated amperage, protecting the circuit from damage. What does the yellow colour indicate? Yellow identifies this as a 20A fuse per the international automotive blade fuse colour coding standard, allowing quick visual identification of the correct rating when inspecting or replacing fuses. What circuits is a 20A fuse suited to? A 20A fuse is suited to higher-current circuits such as driving lights, compressors on smaller loads, accessory power feeds and relay-switched circuits drawing up to 20 amps. Always match the fuse rating to the circuit's required protection level rather than using a higher-rated fuse. What is the difference between standard, mini and micro blade fuses? Standard blade fuses (ATS) measure 19x19mm and are the most common type in older and mid-range vehicles. Mini blade fuses (APM/ATM) are smaller at approximately 10.9x16mm. Micro or low profile mini fuses are smaller again. Check your vehicle's fuse box or owner's manual to confirm which type is required before purchasing. Is this product available in a smaller pack quantity? Yes. The ACX1605BL is the same 20A yellow standard blade fuse available in a pack of 5, suited to lower-volume requirements. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less