OEX LLX3003 Underbonnet LED Work Light Extendable The OEX LLX3003 is an extendable underbonnet LED work light, stretching from 1.2m to 2.0m, delivering 1000 lumens with magnet and hook mounting options and USB charging. Product Overview The LLX3003 is an extendable underbonnet LED work light from OEX, powered by powerful SMD LEDs producing 1000 lumens of light. Extendable from 1.2m to 2.0m, the light is designed to reach across an engine bay or work area for any job, with two magnets and two soft hooks for mounting to almost any surface. Battery life runs to 8 hours on 500 lumen output, or 4 hours on the full 1000 lumen setting, with an approximate 3 hour charge time using the included USB charge cable. Features & Benefits 1000 Lumen SMD LEDs: Powerful SMD LEDs produce up to 1000 lumens of light for clear visibility during underbonnet or general work. Extendable 1.2m to 2.0m Length: The extendable design stretches from 1.2m to 2.0m, letting the light reach across a wide engine bay or work area. Two Mounting Options: Two strong magnets and two soft hooks allow mounting to almost any surface, whether metal or non-metal. Up to 8 Hours Battery Life: Battery life reaches up to 8 hours on the 500 lumen setting, or 4 hours on the full 1000 lumen output. Fast USB Charging: An approximate 3 hour charge time via the included USB charge cable keeps the light ready to go. Technical Specs Specification Detail Part No. LLX3003 Brand OEX Description Underbonnet LED Work Light, Extendable Length Light Type LED (SMD) Light Output 1000 Lumen Extendable Length 1.2m to 2.0m Battery Life 8 Hours @ 500 Lumen, 4 Hours @ 1000 Lumen Charge Time Approx. 3 Hours (USB) Mounting 2 x Magnets, 2 x Soft Hooks Compatible With The LLX3003 is a standalone rechargeable work light suited to underbonnet inspection and general workshop use, mounting via its included magnets or hooks to almost any surface. Frequently Asked Questions What is the LLX3003 used for? The LLX3003 is an extendable LED work light designed for underbonnet inspection and general workshop lighting tasks. How far does the LLX3003 extend? The LLX3003 extends from 1.2m to 2.0m, letting it reach across a wide engine bay or work area. How long does the battery last? Battery life is up to 8 hours on the 500 lumen setting, or 4 hours on the full 1000 lumen output. How is the LLX3003 mounted? The LLX3003 includes two strong magnets and two soft hooks for mounting to almost any surface. How long does it take to charge? The LLX3003 takes approximately 3 hours to charge using the included USB charge cable. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RRGB4RLK3 RGB LED Rock Light Kit 4 Lights with RF Remote Controller A 4-light RGB LED rock light kit from Roadvision, the RRGB4RLK3 includes 4 x 1.8W 256-grade PWM RGB LED rock lights, a controller, card-type RF remote with 30-metre range, 3 rubber mounting options per light, and 2 x 3.2-metre extension leads, with 19 dynamic modes, 20 static colours, demo mode, adjustable speed and brightness, IP67 and IP69K protection, plug-and-play LEDLink connectors, and 10-30V DC multi-volt input. Expandable to 8 lights with optional RRGB1RL3 units. Product Overview The Roadvision RRGB4RLK3 is a complete RGB LED rock light kit designed to add instant underbody and accent lighting to any 4WD, SUV, or modified vehicle. Four 1.8W 256-grade PWM RGB LED rock lights (72 x 14 x 39mm) are powered at 7.2W total for 4 lights or 14.4W total for 8 lights at 10-30V DC. Each light houses 3 x RGB LEDs in a die-cast aluminium housing with polycarbonate lens. IP67 and IP69K dual protection rating ensures reliability under the vehicle in all conditions including high-pressure wash-down. The included card-type RF remote provides wireless control with a 30-metre transmitter range, accessing 19 dynamic lighting modes, 20 static colours, and a demo mode. Speed is adjustable across 10 levels and brightness across 5 levels, with an auto-save function that recalls the last setting. Each rock light includes three rubber mounting options (flat, curved, and angled) to accommodate different underbody surfaces and mounting angles. Two 3.2-metre extension leads are included for flexible routing. Plug-and-play LEDLink connectors provide simple 2-wire installation without cutting or splicing. The system is expandable to 8 lights by adding RRGB1RL3 individual rock light units. Features & Benefits 4 x 1.8W 256-Grade PWM RGB LED Rock Lights: Four 256-grade PWM RGB LED rock lights deliver full-colour underbody lighting with smooth colour transitions and accurate colour reproduction across all 20 static colour options and 19 dynamic modes. 19 Dynamic Modes, 20 Static Colours, and Demo Mode: The RF remote provides access to 19 dynamic lighting modes, 20 selectable static colours, and a demo mode for displaying all colours and effects. Speed is adjustable across 10 levels and brightness across 5 levels, with auto-save recalling the last setting. Card-Type RF Remote with 30-Metre Transmitter Range: The slim card-type RF remote provides wireless control from up to 30 metres for convenient adjustment from inside or outside the vehicle. 3 Rubber Mounting Options Per Light - Flat, Curved, and Angled: Each of the 4 rock lights is supplied with flat, curved, and angled rubber mounts, providing flexibility to mount securely to flat, radius, and angled underbody surfaces without tools or additional hardware. IP67 and IP69K Dual Protection: Both IP67 and IP69K ratings confirm full protection against dust, temporary immersion, and high-pressure, high-temperature water jet exposure, suited to underbody mounting in off-road and all-weather driving conditions. Plug-and-Play LEDLink Connectors - Simple 2-Wire Installation: The plug-and-play LEDLink connector system allows all 4 rock lights to be connected without cutting or splicing wires, simplifying installation and enabling quick reconfiguration. 2 x 3.2-Metre Extension Leads Included: Two 3.2-metre extension leads provide additional cable reach for flexible routing of the rock light cables across different vehicle sizes and underbody configurations. Expandable to 8 Lights: The RRGB4RLK3 system can be expanded from 4 to 8 rock lights by adding individual RRGB1RL3 units, increasing underbody coverage without requiring a new controller or remote. Multi-Volt 10-30V DC - 12V and 24V Compatible: Compatible with both 12V and 24V vehicle electrical systems. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight, tough die-cast aluminium construction with polycarbonate lens for long-term underbody durability. 50,000 Hour LED Lifespan: Long-term maintenance-free reliability. What's in the Box 4 x RGB LED Rock Lights (RRGB1RL3) 4 x Flat Rubber Mounts 4 x Curved Rubber Mounts 4 x Angled Rubber Mounts (spare part: RLB10AB3) 1 x Controller 1 x RF Remote (spare part: RRGBRM3) 2 x 3.2m Extension Leads (spare part: RRGB3.2M) Technical Specs Specification Detail SKU RRGB4RLK3 Brand Roadvision Series Rock Light Colour Output RGB LED Quantity per Light 3 x RGB LEDs Power per Light 1.8W Power - 4 Lights 7.2W Power - 8 Lights 14.4W Input Voltage 10-30V DC Current Draw 0.7A at 13.8V (4 lights) Dimensions per Light 72mm x 14mm x 39mm Wiring Plug and Play LEDLink Connectors IP Rating IP67 and IP69K Dynamic Modes 19 Static Colours 20 Demo Mode Yes Speed Adjustment 10 Levels Brightness Adjustment 5 Levels Auto-Save Yes Remote Type Card-Type RF Remote Remote Range 30 Metres Expandable Yes (up to 8 lights with RRGB1RL3) Mounting Options Flat, Curved, and Angled Rubber Mounts Extension Leads 2 x 3.2m Housing Die-Cast Aluminium Lens Polycarbonate LED Lifespan 50,000 Hours Spare Parts Item Spare Part Number Individual Rock Light RRGB1RL3 RF Remote RRGBRM3 Angled Rubber Mount RLB10AB3 3.2m Extension Lead RRGB3.2M Compatible With The RRGB4RLK3 is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. The plug-and-play LEDLink connectors allow the system to be extended with additional RRGB1RL3 rock lights up to a maximum of 8 lights on a single controller. Confirm total power draw does not exceed the controller rating when expanding to 8 lights. Frequently Asked Questions Can the RRGB4RLK3 be expanded to more than 4 lights? Yes. The system can be expanded from 4 to 8 lights by adding individual RRGB1RL3 rock light units. All 8 lights are controlled by the same controller and RF remote included in the kit. Total power draw increases to 14.4W for 8 lights at 10-30V DC. What mounting options are included with each rock light? Each of the 4 rock lights includes a flat rubber mount, a curved rubber mount, and an angled rubber mount (spare part RLB10AB3), providing flexibility to mount on flat, radius, and angled underbody surfaces. Does the RRGB4RLK3 require hardwire installation? The RRGB4RLK3 uses a simple 2-wire plug-and-play LEDLink connector system. It connects to the vehicle power supply via the included controller, which requires connection to a 10-30V DC power source. No cutting or splicing of the rock light cables is required. What is the IP rating of the RRGB4RLK3 rock lights? The rock lights hold both IP67 and IP69K ratings, confirming full protection against dust, temporary immersion, and high-pressure, high-temperature water jet exposure suitable for underbody mounting. How many colours and modes does the RRGB4RLK3 support? The RF remote provides access to 20 static colours, 19 dynamic lighting modes, and a demo mode, with 10 adjustable speed levels and 5 brightness levels. An auto-save function recalls the last selected setting when the system is powered on.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL1110F LED Work and Rock Light 6W Flood Beam 950lm A compact 6W flood beam LED work and rock light from Roadvision, the RWL1110F delivers 950 lumens with IP69K protection and 10-30V DC multi-volt input, suited to underbody, off-road, and tight-space work lighting applications. Product Overview The Roadvision RWL1110F is a compact LED work and rock light delivering 950 lumens in a flood beam pattern at 6W. IP69K rated for full protection against dust and high-pressure, high-temperature water jet exposure, making it suited to underbody, rock light, and exposed exterior work lighting positions on 4WDs, trucks, and off-road vehicles. Multi-volt 10-30V DC input is compatible with 12V and 24V vehicle electrical systems. Die-cast aluminium housing with polycarbonate lens provides durable, lightweight construction for demanding installation environments. Features & Benefits 950 Lumens Flood Beam at 6W: The RWL1110F delivers 950 lumens in a wide-angle flood beam pattern at 6W for effective area illumination in compact underbody and rock light mounting positions. IP69K Protection - High-Pressure Wash-Down Rated: IP69K confirms full protection against dust and high-pressure, high-temperature water jet exposure at close range, providing maximum durability for underbody and exposed exterior mounting positions. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and equipment electrical systems. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight, tough construction for demanding off-road and work lighting applications. Compact Design for Tight-Space Applications: Designed for applications where space is limited, including underbody rock light positions, bull bars, and confined machinery mounting locations. Solid-State LED Technology: Maintenance-free reliability with solid-state LED construction. Technical Specs Specification Detail SKU RWL1110F Brand Roadvision Beam Type Flood Beam Lumen Output 950lm Total Watts 6W Input Voltage 10-30V DC IP Rating IP69K Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Compatible With The RWL1110F is compatible with 10-30V DC vehicle and equipment electrical systems including 12V and 24V platforms. IP69K rated for underbody and exposed exterior mounting. Frequently Asked Questions What beam pattern does the RWL1110F use? The RWL1110F uses a flood beam pattern, delivering 950 lumens of wide-angle illumination suited to area coverage in underbody and tight-space work lighting applications. Is the RWL1110F suitable for underbody rock light installation? Yes. The IP69K rating confirms full protection against high-pressure, high-temperature water jet exposure, making it well suited to underbody rock light mounting positions on 4WDs and off-road vehicles. Is the RWL1110F compatible with 24V vehicles? Yes. The RWL1110F operates across 10-30V DC, compatible with both 12V and 24V electrical systems. How does the RWL1110F compare to the RWL1109F? The RWL1109F is the previous generation model rated at 4.5W and 302 lumens with IP67 protection. The RWL1110F delivers 950 lumens at 6W with IP69K protection, providing a significant improvement in output and water resistance. What applications is the RWL1110F suited to? The RWL1110F is suited to underbody rock light positions, work lighting in tight-space applications, bull bar and A-pillar mounting on 4WDs and off-road vehicles, and exposed exterior work lighting on trucks and agricultural equipment where IP69K protection is required.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL1110AF LED Work and Rock Light 6W Amber Flood Beam A compact 6W amber flood beam LED work and rock light from Roadvision, the RWL1110AF delivers amber output with IP69K protection and 10-30V DC multi-volt input, suited to underbody, off-road, and tight-space work lighting applications requiring amber illumination. Product Overview The Roadvision RWL1110AF is a compact amber LED work and rock light from the RWL1110 Series, sharing the same IP69K protection, 6W input, and multi-volt 10-30V DC compatibility as the white output RWL1110F but producing amber flood beam output. IP69K rated for full protection against dust and high-pressure, high-temperature water jet exposure, making it suited to underbody, rock light, and exposed exterior mounting positions on 4WDs, trucks, and off-road vehicles. The amber output reduces insect attraction and provides a distinctive appearance suited to underbody accent lighting and off-road aesthetic applications. Die-cast aluminium housing with polycarbonate lens provides durable, lightweight construction for demanding installation environments. Features & Benefits Amber Flood Beam Output at 6W: The RWL1110AF produces amber flood beam output at 6W for effective wide-angle illumination in compact underbody and rock light mounting positions, with amber colour output suited to accent lighting and applications where reduced insect attraction is preferred. IP69K Protection - High-Pressure Wash-Down Rated: IP69K confirms full protection against dust and high-pressure, high-temperature water jet exposure at close range, providing maximum durability for underbody and exposed exterior mounting positions. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and equipment electrical systems. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight, tough construction for demanding off-road and work lighting applications. Compact Design for Tight-Space Applications: Designed for applications where space is limited, including underbody rock light positions, bull bars, and confined machinery mounting locations. Solid-State LED Technology: Maintenance-free reliability with solid-state LED construction. Technical Specs Specification Detail SKU RWL1110AF Brand Roadvision Beam Type Flood Beam LED Colour Amber Total Watts 6W Input Voltage 10-30V DC IP Rating IP69K Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Compatible With The RWL1110AF is compatible with 10-30V DC vehicle and equipment electrical systems including 12V and 24V platforms. IP69K rated for underbody and exposed exterior mounting. A white output version is available as the RWL1110F. Frequently Asked Questions What is the difference between the RWL1110AF and the RWL1110F? Both are 6W IP69K flood beam LED work and rock lights from the same series. The RWL1110AF produces amber output suited to underbody accent lighting and applications where reduced insect attraction is preferred. The RWL1110F produces white output for maximum task lighting visibility. Is the RWL1110AF suitable for underbody rock light installation? Yes. The IP69K rating confirms full protection against high-pressure, high-temperature water jet exposure, making it well suited to underbody rock light mounting positions on 4WDs and off-road vehicles. Is the RWL1110AF compatible with 24V vehicles? Yes. The RWL1110AF operates across 10-30V DC, compatible with both 12V and 24V electrical systems. Why choose amber output for rock lights? Amber output reduces insect attraction compared to white LED lighting, making it preferred for camping, outdoor use, and evening applications. Amber rock lights also provide a distinctive appearance for underbody accent lighting builds. What applications is the RWL1110AF suited to? The RWL1110AF is suited to underbody rock light positions, accent lighting on 4WDs and off-road vehicles, exposed exterior work lighting on trucks and agricultural equipment, and any application where amber output and IP69K protection are required.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL3420F 34 Series LED Work Lamp 20W Flood Beam 1600lm A compact 20W flood beam LED work lamp from the Roadvision RWL34 Series, the RWL3420F delivers 1600 lumens with 42 lux at 10 metres, powered by 4 x 5W Cree LEDs, featuring 4 interchangeable colour fascia inserts, IP67 waterproof and dustproof rating, die-cast aluminium housing, polycarbonate lens, and 2-pin Deutsch plug, backed by a 5-year warranty. Product Overview The Roadvision RWL3420F is a 20W flood beam LED work lamp from the RWL34 Series, configured with 4 x 5W Cree LEDs to deliver a wide-angle high-lux flood beam for broad area work lighting. The flood pattern delivers 1600 lumens with 42 lux at 10 metres and a beam reach of 65 metres at 1 lux and 130 metres at 0.5 lux. Four interchangeable colour fascia inserts (blue, red, yellow, and black) are included. IP67 rated. Lightweight die-cast aluminium housing at 81 x 76 x 85mm with polycarbonate lens. Multi-volt 10-30V DC at 1.5A at 13.8V with over/under voltage and reverse polarity protection. EMI/EMC radio interference approved. 2-pin Deutsch plug. 50,000 hour LED lifespan. Backed by a 5-year warranty. Features & Benefits 1600 Lumens - Wide-Angle Flood Beam: Delivers 1600lm with 42 lux at 10 metres for high-intensity wide-area illumination at working distance, suited to reverse cameras, machinery operation, loading areas, and job site lighting. 4 x 5W Cree LEDs - High Lux Flood Output: Four 5W Cree LEDs are specifically matched for the flood beam pattern to deliver higher lux at working distances for maximum area coverage and task lighting performance. 4 Interchangeable Colour Fascia Inserts: Blue, red, yellow, and black fascia inserts allow the lamp appearance to be matched to vehicle or fleet requirements. IP67 Waterproof and Dustproof: Full dust and temporary immersion protection for all-weather and off-road applications. Compact 81 x 76 x 85mm Square Housing: Compact form factor for tight mounting positions across a wide range of vehicles and equipment. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight, tough construction for demanding work environments. 50,000 Hour LED Lifespan: Long-term maintenance-free reliability. Multi-Volt 10-30V DC with Electronic Protection: Compatible with 12V and 24V systems. 2-Pin Deutsch Plug: Secure, weatherproof connection. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL3420F Brand Roadvision Series RWL34 Description 34 Series LED Work Lamp 20W Flood Beam Type Flood Beam Lumen Output 1600lm Lux at 10m 42lx Beam Distance at 1 Lux 65m Beam Distance at 0.5 Lux 130m Total Watts 20W LED Quantity 4 x 5W Cree Input Voltage 10-30V DC Current Draw 1.5A at 13.8V Dimensions 81mm x 76mm x 85mm Wiring 2-Pin Deutsch Plug IP Rating IP67 Fascia Inserts Blue, Red, Yellow, Black (4 included) LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Warranty 5 Years Compatible With The RWL3420F is compatible with 10-30V DC vehicle and equipment electrical systems. The RWL34 Series is also available in a 12W spot version (RWL3412S). The RWL36 Series provides 6-LED configurations in 18W spot (RWL3618S) and 30W flood (RWL3630F). Frequently Asked Questions What is the difference between the RWL3420F and the RWL3412S? The RWL3420F uses 4 x 5W Cree LEDs in a flood beam pattern for wide-area illumination at 1600lm with 42 lux at 10 metres. The RWL3412S uses 4 x 3W Osram Hi-Lux LEDs in a spot beam for long-range penetration at 960lm with 380 lux at 10 metres and 195m at 1 lux. Choose flood for area coverage; choose spot for long-range forward lighting. Is the RWL3420F compatible with 24V vehicles? Yes. The RWL3420F operates across 10-30V DC. Is the RWL3420F IP67 rated? Yes. What fascia inserts are included with the RWL3420F? Blue, red, yellow, and black inserts are included. What is the LED lifespan of the RWL3420F? 50,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Jump-Start Any Vehicle Anywhere with 800 Amps of Portable Lithium Power Product Overview The Hulk 4x4 HU6510 is a compact lithium-ion jump starter built to get you back on the road without waiting on a service vehicle. Packing 10,400mAh of lithium cobalt battery capacity and a peak output of 800 amps, it's rated to start petrol engines up to 6.0L and diesel engines up to 3.0L, making it a solid option for everything from daily drivers to bigger 4WDs and utes. Beyond jump-starting, the HU6510 doubles as a portable power bank with dual USB ports, dual USB-C inputs, and 10W wireless charging for compatible devices, plus a multi-mode LED flashlight with SOS and strobe functions. It's protected against reverse polarity, short circuits, over-discharge, and overheating, and comes packed in an EVA protective carry case so it can live in the vehicle ready to go when needed. Features & Benefits 800A peak / 300A starting current – enough grunt to start petrol engines up to 6.0L and diesel engines up to 3.0L, handy for tradies and 4WD owners who can't always get to a workshop Spark-proof, reverse polarity clamps – safer connection when jump-starting in low light or awkward engine bays 10W wireless charging + dual USB-C inputs – charge the unit itself or top up phones and devices without extra cables, useful on long touring trips Multi-function LED display – shows battery charge and current levels at a glance so you're not guessing before a start attempt Multi-mode LED flashlight (solid/SOS/strobe) – doubles as an emergency light for roadside breakdowns or camp use Rubberised tyre-tread housing – built to handle being tossed in a tool box, ute tray, or glovebox without cracking EVA protective carry case included – keeps the unit and cables together and protected in storage Technical Specs Specification Detail Battery type Lithium Cobalt Battery capacity 10,400mAh Starting current 300A Peak current 800A Charging time 2–4 hours Input 15V 1A (USB) Output 5V 3A Wireless charging 10W (compatible devices only) Inputs Dual USB-C Outputs Dual USB Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +70°C Dimensions 158mm (L) x 75mm (W) x 31mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 6.0L engine capacity Diesel vehicles up to 3.0L engine capacity Most USB and USB-C chargeable devices (phones, tablets, cameras) Qi-compatible wireless charging devices 4WD, ute, and touring setups where a spare power source and light source are handy in one unit Weight 1.0kg Frequently Asked Questions Will this start my 4WD or ute? Yes, it's rated to jump-start petrol engines up to 6.0L and diesel engines up to 3.0L, which covers most utes and 4WDs on Australian roads. How long does it take to fully charge? The HU6510 takes approximately 2–4 hours to charge fully from the included USB charging cable. Can I use it to charge my phone? Yes, it has dual USB output ports plus 10W wireless charging for compatible devices, so it works as a portable power bank too. Is it safe if I connect the clamps the wrong way? Yes, the clamps are spark-proof with reverse polarity protection, and the unit also has short circuit, over-discharge, and overheat protection. How many jump starts can I expect from one charge? This depends on engine size and condition, but the 10,400mAh lithium battery and 800A peak output are designed for multiple start attempts per charge under normal conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

The Biggest Jump Starter in the Hulk 4x4 Range 2,500 Amps of High-Density Lithium Power Product Overview The Hulk 4x4 HU6512 sits at the top of the Hulk jump starter range, packing 28,000mAh of high energy density lithium cobalt battery capacity and a 2,500A peak output to handle the most demanding engine starts petrol up to 10.0L and diesel up to 8.0L. That puts it in range for heavy 4WDs, large commercial vehicles, trucks, and high-displacement diesel rigs where a standard jump starter simply won't cut it. Like the rest of the Hulk range, it doubles as a portable multi-output power station with dual USB ports, DC outputs across 12V, 16V, and 19V, and an included laptop adaptor harness and 240V AC charger. The multi-mode LED flashlight, multi-function LED display, and rubberised housing round it out as a practical all-in-one emergency kit for serious touring, worksite, and remote use. Features & Benefits 2,500A peak / 1,200A starting current — the highest output in the Hulk 4x4 jump starter range; rated for petrol engines up to 10.0L and diesel engines up to 8.0L, covering heavy trucks and the largest 4WDs on the road 28,000mAh high energy density lithium cobalt battery — larger reserve capacity than lower models means more start attempts and longer device charging between recharges Spark-proof, reverse polarity clamps — safer clamping under the bonnet, particularly useful on large engine bays and in remote or low-light conditions Multi-voltage DC output (12V / 16V / 19V at 3.5A) — charges laptops and DC-powered devices without needing mains power; dual 12V and 19V outlets both rated at 3.5A Full accessory kit included — 240V AC charger, car charger adaptor, laptop adaptor harness, and 4-in-1 USB cable cover virtually every charging scenario Multi-function LED display — shows battery charge level and current draw before and during a start attempt Multi-mode LED flashlight (solid/SOS/strobe) — practical for roadside breakdowns, remote camping, or emergency signalling Black and grey rubberised housing — impact-resistant construction for life in a ute tray, toolbox, or boot EVA protective carry case — keeps all accessories and clamps together and protected during storage Technical Specs Specification Detail Battery type Lithium Cobalt Battery capacity 28,000mAh Starting current 1,200A Peak current 2,500A Charging time 5–8 hours Input (USB) 15V 1A Input (secondary) 18V 2A USB output 5V 2.1A DC output 12V / 16V / 19V at 3.5A DC outlets Dual 12V and 19V (both 3.5A) Dual USB ports Yes Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +60°C Dimensions 183mm (L) x 119mm (W) x 45mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 10.0L engine capacity Diesel vehicles up to 8.0L engine capacity Laptops and DC-powered devices via 12V/16V/19V outputs and included laptop adaptor harness USB-chargeable devices (phones, tablets, cameras) via dual USB ports Heavy 4WDs, trucks, and large commercial vehicles requiring high-current emergency starting Weight 3.04kg (shipping weight including packaging) Frequently Asked Questions How does the HU6512 compare to the smaller Hulk jump starters? The HU6512 is the top-tier model, offering the largest battery (28,000mAh), highest peak current (2,500A), and widest diesel engine rating (up to 8.0L) in the Hulk 4x4 jump starter range. Will it start large diesel trucks or commercial vehicles? Yes — the 2,500A peak output and 8.0L diesel rating make it suitable for heavy 4WDs, large utes, and light commercial vehicles that lower-rated starters can't handle. What's the difference between the 15V and 18V inputs? The unit accepts both a 15V 1A USB input and an 18V 2A secondary input, giving you flexibility to recharge via the included car charger adaptor or 240V AC charger. Can I charge a laptop directly from the HU6512? Yes — it includes a laptop adaptor harness and DC outputs at 12V, 16V, and 19V (3.5A), plus dual 12V and 19V outlets, covering most laptop charging requirements. How long does the HU6512 take to fully charge? Expect 5–8 hours from flat to full using the included 240V AC charger or car charger adaptor, depending on the input source.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Professional-Grade 12V/24V Jump Starter Built for Heavy Machinery, Trucks, and Zero-Downtime Operations Product Overview The Hulk 4x4 HU6514 is a professional-series heavy-duty jump starter engineered for operators who can't afford downtime. With 80,000mAh (296Wh) of lithium cobalt battery capacity and a 15,000A peak output on 12V systems (6,000A on 24V), it's built for the kind of equipment that smaller portable starters simply can't touch semi-trucks, buses, heavy plant, agricultural machinery, and large diesel engines across construction, mining, and transport industries. Unlike compact jump starters, the HU6514 features integrated jumper cables, dual 12V/24V output voltage, and a rated lifetime of up to 5,000 starts. It also functions as a multi-output portable power station with four USB-A ports, USB-C input/output, and dual 12V DC auxiliary ports making it a practical on-site power hub beyond its jump-starting role. Features & Benefits 15,000A peak (12V) / 6,000A peak (24V) — handles the starting demands of semi-trucks, large diesel plant, and heavy commercial vehicles that lower-rated starters can't manage 80,000mAh / 296Wh lithium cobalt battery — massive reserve capacity designed for repeated heavy-duty use on-site or in the field Up to 5,000 estimated lifetime jump starts — long-term reliability for fleet operators and plant managers, not just occasional roadside use Integrated jumper cables — no separate clamp storage needed; cables are built into the unit for faster deployment on busy worksites Dual output voltage (12V and 24V) — covers the full range of 12V and 24V petrol and diesel vehicles from passenger cars to large trucks and machinery 4x USB-A + USB-C output/input + dual 12V DC aux ports — charges phones, tablets, and other devices while on-site; comprehensive utility in a single unit LED display monitoring — shows power level, output voltage, and real-time current draw so operators know exactly what the unit is doing at any moment Multi-mode LED flashlight (solid/SOS/strobe) — useful for engine bays, dark worksites, and emergency situations AC wall charger included — recharges from any 120–240V mains outlet in approximately 8 hours; accepts 18VDC 2A via 5.5mm input or USB-C Technical Specs Specification Detail Battery type Lithium-ion Cobalt Battery capacity 80,000mAh / 296Wh Starting current 12V: 3,000A / 24V: 2,000A Peak current 12V: 15,000A / 24V: 6,000A Output voltage 12–16V DC and 24–32V DC Output ports Integrated jumper cables; 4x USB-A 5V 2.1A (QC3.0); 2x 12V DC aux 10A; 1x 12V 5.5mm 3.5A; 1x USB-C Input charging ports 5.5mm 18VDC 2A; USB-C AC recharging 18VDC via 120–240V AC wall charger (~8 hours) Estimated lifetime starts Up to 5,000 Storage temperature -20°C to +80°C Operating temperature Not specified Dimensions 356mm (L) x 128mm (W) x 418mm (H) Warranty 1 year Compatible With / Goes Well With 12V petrol and diesel vehicles (passenger cars, utes, 4WDs, light commercial) 24V diesel vehicles (semi-trucks, buses, heavy plant, agricultural and mining machinery) Most 12V and 24V engines including heavy machinery and transport equipment (per manufacturer specification) USB and USB-C chargeable devices via multi-port output On-site power applications requiring 12V DC auxiliary output Weight 8.35kg (unit weight) / 10.23kg (shipping weight including packaging) Frequently Asked Questions Can the HU6514 start both 12V and 24V vehicles? Yes — it delivers 15,000A peak on 12V systems and 6,000A peak on 24V systems, covering both light vehicles and heavy commercial equipment like semi-trucks and buses. How many jump starts can I expect over its lifetime? The HU6514 is rated for up to 5,000 estimated lifetime jump starts, making it suitable for fleet operators and plant managers with ongoing heavy-duty starting requirements. Are the jumper cables built in or separate? The jumper cables are integrated into the unit — no separate clamp storage or assembly required, which speeds up deployment in worksite and emergency situations. How is the unit recharged? It recharges via an included 120–240V AC wall charger in approximately 8 hours, or via the 5.5mm 18VDC 2A input or USB-C port for alternative charging sources. What USB and power outputs does the HU6514 have? It features four USB-A ports (5V 2.1A, QC3.0), one USB-C port, two 12V DC auxiliary ports (10A), and one 12V 5.5mm port (3.5A) for broad device charging capability.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Heavy-Duty 2,000 Amp Jump Starter Built for the Biggest Engines on Australian Roads Product Overview The Hulk 4x4 HU6511 is a high-capacity lithium-ion jump starter designed to handle serious engine sizes petrol up to 10.0L and diesel up to 7.0L making it one of the most capable portable jump starters for 4WDs, heavy utes, trucks, and large-displacement vehicles. Its 18,000mAh battery delivers a 2,000A peak current and 1,200A starting current, with enough reserve to power devices and charge laptops and phones between uses. Beyond starting your vehicle, the HU6511 functions as a multi-output portable power station with dual USB ports, DC outputs across 12V, 16V, and 19V, and a 240V AC charger included in the kit. The unit also features a multi-mode LED flashlight with solid, SOS, and strobe functions, and ships in an EVA protective carry case with everything needed to charge, clamp, and get moving. Features & Benefits 2,000A peak / 1,200A starting current — rated to start petrol engines up to 10.0L and diesel engines up to 7.0L, covering the biggest rigs, 4WDs, and commercial vehicles you're likely to encounter on Australian roads Spark-proof, reverse polarity clamps — safer connection under the bonnet, especially in low light or awkward engine bays Multi-voltage DC output (12V / 16V / 19V) — powers or charges laptops and other DC devices in the field without needing mains power 240V AC charger, car charger adaptor, and 4-in-1 USB cable included — covers nearly every charging scenario from home to remote Laptop adaptor harness included — makes this a genuinely useful touring and work tool beyond jump-starting Multi-function LED display — shows charge level and current levels at a glance before attempting a start Multi-mode LED flashlight (solid/SOS/strobe) — useful for roadside breakdowns, camp use, or emergencies Black and grey rubberised housing — built for rough storage in ute trays, toolboxes, and under seats EVA protective carry case — keeps the unit, clamps, and cables organised and protected Technical Specs Specification Detail Battery type Lithium-ion Battery capacity 18,000mAh Starting current 1,200A Peak current 2,000A Charging time 5–6 hours Input 18V 1.5A (USB) USB output 5V 2.1A DC output 12V / 16V / 19V at 3.5A DC outlets 12V 4A and 19V 3.5A Dual USB ports Yes Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +60°C Dimensions 193mm (L) x 116mm (W) x 40mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 10.0L engine capacity Diesel vehicles up to 7.0L engine capacity Laptops and DC-powered devices via 12V/16V/19V outputs and included laptop adaptor harness USB and USB-C chargeable devices (phones, tablets, cameras) 4WD, truck, and touring setups requiring high-current emergency starting capability Weight 2.22kg (shipping weight including packaging) Frequently Asked Questions Will this start a large diesel 4WD or truck? Yes — it's rated for diesel engines up to 7.0L and petrol up to 10.0L, making it suitable for most heavy 4WDs, utes, and light commercial vehicles. Can I charge my laptop with this unit? Yes, it includes a laptop adaptor harness and DC outputs at 12V, 16V, and 19V (3.5A), covering most laptop charging requirements without needing mains power. What charging accessories are included? The kit includes a 240V AC charger, a car charger adaptor, a 4-in-1 USB charging cable, spark-proof clamps, and an EVA protective carry case. How long does the unit take to fully charge? Expect 5–6 hours from flat to full charge using the included 240V AC charger or car charger adaptor. Is the HU6511 safe to use if I connect the clamps incorrectly? Yes — the clamps are spark-proof with reverse polarity protection, and the unit includes short circuit, over-discharge, and overheat protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL4840FFM Stealth LED Work Light 40W Flood Flush Mount A flush mount square LED work light from the Roadvision Stealth RWL48 Series, the RWL4840FFM produces up to 3016 lumens from 4 x 9W Osram LEDs through a 110-degree flood beam, with 10-30V DC multi-volt input, die-cast aluminium housing, polycarbonate lens, an 82 x 75mm panel cut-out, 2-pin Deutsch plug wiring, and a 5-year warranty. Product Overview The Roadvision RWL4840FFM is the flush mount version of the Stealth RWL48 Series 40W square work light, designed to sit neatly into bull bars, rear bars, canopies, and body panels via an 82 x 75mm cut-out. The smoked-look lens and blackout mounting hardware give a stealth on-vehicle look, and the 122 x 89 x 72mm flush mount body suits demanding environments and applications where space is limited. Four 9W Osram LEDs produce up to 3016 maximum lumens of super white light close to daylight, spread across a 110-degree flood beam pattern that delivers 65 lux at 10 metres and reaches 81 metres at 1 lux. The RWL4840FFM is equipped with thermal management technology that smart-adjusts to the environmental temperature to balance optimal performance and prevent overheating. The multi-volt 10-30V DC input draws a super low 1.4 to 3.3 amps at 13.8V, and solid-state technology delivers a 50,000 hour LED lifespan. Installation is a simple 2-wire connection via the 2-pin Deutsch plug, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. Features & Benefits Flush Mount Design - 82 x 75mm Cut-Out: The RWL4840FFM mounts flush into panels via an 82 x 75mm cut-out, providing a clean, integrated installation into bull bars, rear bars, canopies, and vehicle bodywork. 40W Square Flood Beam - Up to 3016 Lumens: The RWL4840FFM produces up to 3016 maximum lumens through a 110-degree flood beam pattern, delivering 65 lux at 10 metres and a maximum distance of 81 metres at 1 lux for broad, even work area coverage. 4 x 9W Osram LEDs: Four 9W Osram LEDs produce super white light close to daylight, improving visibility and reducing eye strain during night work compared to warmer light sources. Stealth Smoked-Look Lens and Blackout Hardware: The Stealth RWL48 Series features a smoked-look lens and blackout mounting hardware for a low-key, integrated on-vehicle appearance. 50,000 Hour LED Lifespan: Solid-state technology delivers a 50,000 hour LED lifespan for maintenance-free performance over the long service life typical of 4WD, work vehicle, and machinery applications. Thermal Management Technology: The RWL4840FFM smart-adjusts to the environmental temperature, balancing optimal light performance with overheating prevention in demanding conditions. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight, tough die-cast aluminium housing and polycarbonate lens provide durability in the most demanding environments. Multi-Volt 10-30V DC with Super Low Current Draw: The 10-30V DC multi-volt input draws just 1.4 to 3.3 amps at 13.8V, making the RWL4840FFM compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. Simple 2-Wire Installation with Deutsch Plug: The 2-pin Deutsch plug and simple 2-wire installation make for a quick, professional connection to the vehicle wiring. Built-In Circuit Protection: Over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval protect both the lamp and the vehicle's electrical and communication equipment. 5-Year Warranty: The RWL4840FFM is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL4840FFM Brand Roadvision Series Stealth RWL48 Description LED Work Light 10-30V Square 40W Flood Beam Flush Mount Beam Pattern 110° Flood Maximum Lumens 3016lm Maximum Watts 40W Light Source 4 x 9W Osram LEDs Input Voltage 10-30V DC Current Draw 1.4-3.3A at 13.8V Maximum Lux at 10m 65LX Maximum Distance at 1 Lux 81m Lens Polycarbonate Housing Die-Cast Aluminium Mounting Type Flush Mount Cut Out 82 x 75mm Wiring 2 Pin Deutsch Plug Dimensions 122 x 89 x 72mm LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL4840FFM is compatible with 10-30V DC vehicle electrical systems, covering both 12V and 24V vehicles. The Stealth RWL48 Series is also available as a standard 40W surface mount (RWL4840F) and a compact 23W flood beam (RWL4823F). Confirm the 82 x 75mm cut-out dimensions and rear panel clearance before purchase. A cut-out template is available from Roadvision. Frequently Asked Questions What size cut-out does the RWL4840FFM require? The RWL4840FFM requires an 82 x 75mm panel cut-out for flush mounting, with overall dimensions of 122 x 89 x 72mm. Roadvision provides a cut-out template for accurate installation. How bright is the RWL4840FFM? The RWL4840FFM produces up to 3016 maximum lumens from 4 x 9W Osram LEDs, delivering 65 lux at 10 metres and a maximum distance of 81 metres at 1 lux through a 110-degree flood beam. Is the RWL4840FFM compatible with 24V vehicles? Yes. The RWL4840FFM operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is the difference between the RWL4840FFM and RWL4840F? Both share the same 40W output, 3016 lumens, and 110-degree flood beam. The RWL4840FFM is the flush mount version requiring an 82 x 75mm panel cut-out, while the RWL4840F is the standard surface mount version measuring 81 x 82 x 67mm. How does the RWL4840FFM connect to the vehicle? The RWL4840FFM uses a 2-pin Deutsch plug with simple 2-wire installation, and includes over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL1120FFM LED Work Light 20W Flood Beam Flush Mount 526lm 9-36V A compact 20W flood beam flush mount LED work light from the Roadvision RWL1120 Series, the RWL1120FFM delivers 526 lumens from 2 x 10W LEDs with a beam distance of 60 metres at 1 lux, in a lightweight die-cast aluminium housing with polycarbonate lens, 9-36V DC multi-volt input, 2-pin Deutsch plug, and a 72 x 50mm panel cutout for flush installation, backed by a 5-year warranty. Product Overview The Roadvision RWL1120FFM is a rectangle flush mount LED work light from the RWL1120 Series, sharing the same LED array, output, beam pattern, and electrical specifications as the surface mount RWL1120F but designed for flush panel installation via a 72 x 50mm cutout. Two 10W LEDs produce 526 lumens of super-white flood beam light close to daylight colour temperature, with 29 lux at 6 metres and a beam reach of 60 metres at 1 lux. The 109 x 59 x 55mm die-cast aluminium housing with polycarbonate lens provides durability and effective heat management. Multi-volt 9-36V DC input at 1.4A at 13.8V, over/under voltage and reverse polarity protection, EMI/EMC radio interference approval, and 2-pin Deutsch plug for simple 2-wire installation. Backed by a 5-year warranty. Features & Benefits 526 Lumens Flood Beam - 60 Metres at 1 Lux: The RWL1120FFM delivers 526 lumens of flood beam output with 29 lux at 6 metres and a beam reach of 60 metres at 1 lux, providing broad area illumination suited to flush-mounted work lighting applications. 2 x 10W LEDs - Super White Daylight-Close Output: Two 10W LEDs produce a super-white output close to daylight colour temperature for accurate colour rendering and clear visibility during work operations. Flush Mount Design with 72 x 50mm Panel Cutout: The RWL1120FFM is designed for flush panel installation via a 72 x 50mm cutout, providing a clean, recessed appearance suited to toolboxes, service bodies, and vehicle panels where a flush finish is preferred. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing at 109 x 59 x 55mm provides structural rigidity and effective heat dissipation, while the polycarbonate lens resists impact and UV degradation. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated lifespan with maintenance-free solid-state technology provides long-term reliability. Multi-Volt 9-36V DC with Low Current Draw: Compatible with 12V, 24V, and 36V electrical systems at 1.4A at 13.8V. Over/Under Voltage and Reverse Polarity Protection: Electronic protection safeguards the LED driver from voltage fluctuations and wiring errors. EMI/EMC Radio Interference Approved: Confirmed compatible with vehicle communication and electronic systems without interference. 2-Pin Deutsch Plug for Simple 2-Wire Installation: Secure, weatherproof, and vibration-resistant 2-wire connection. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL1120FFM Brand Roadvision Series RWL1120 Description LED Work Light 9-36V Rectangle 20W Flood Beam Flush Mount Beam Type Flood Beam Maximum Lumens 526lm Total Watts 20W Light Source 2 x 10W LEDs Input Voltage 9-36V DC Current Draw 1.4A at 13.8V DC Lux at 6m 29 Lux Beam Distance at 1 Lux 60m Dimensions 109mm x 59mm x 55mm Mount Type Flush Mount Cutout Required 72mm x 50mm Wiring 2-Pin Deutsch Plug Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL1120FFM is compatible with 9-36V DC electrical systems including 12V, 24V, and 36V vehicle and equipment platforms. Requires a 72 x 50mm panel cutout for flush installation. The 2-pin Deutsch plug provides a secure weatherproof 2-wire connection. A surface mount version without cutout requirement is available as the RWL1120F. Frequently Asked Questions What size panel cutout does the RWL1120FFM require? The RWL1120FFM requires a 72 x 50mm panel cutout for flush installation. Confirm the cutout dimensions are achievable in your specific panel or surface before purchase. What is the difference between the RWL1120FFM and the RWL1120F? Both share identical LED configuration, output, beam pattern, and electrical specifications. The RWL1120F is a surface mount unit measuring 71 x 62 x 55mm requiring no cutout. The RWL1120FFM is a flush mount unit measuring 109 x 59 x 55mm requiring a 72 x 50mm panel cutout for a recessed installation finish. Choose based on the installation surface and preferred mounting style. Is the RWL1120FFM compatible with 24V vehicles? Yes. The RWL1120FFM operates across 9-36V DC, making it compatible with 12V, 24V, and 36V electrical systems. What is the beam pattern of the RWL1120FFM? The RWL1120FFM produces a flood beam pattern delivering 526 lumens with 29 lux at 6 metres and a beam reach of 60 metres at 1 lux. What is the rated LED lifespan of the RWL1120FFM? The RWL1120FFM has a rated LED lifespan of 50,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL9424SF 94 Series LED Work Light 32W Flood Beam Square A compact square 32W flood beam LED work light from the Roadvision RWL94 Series, the RWL9424SF delivers 2200 lumens from 4 Osram LEDs in a die-cast aluminium housing with polycarbonate lens, featuring Thermal Management Technology, 10-30V DC multi-volt input, 2-pin Deutsch plug, and CTA reverse function approval (CTA-062220), backed by a 5-year warranty. Product Overview The Roadvision RWL9424SF is a square flood beam LED work light from the RWL94 Series, designed for demanding work lighting applications where compact form factor and reliable high-output performance are required. Four Osram LEDs produce 2200 lumens of super-white flood beam output in a 95 x 71 x 41mm die-cast aluminium housing with polycarbonate lens. Roadvision's Thermal Management Technology actively adjusts to the environmental temperature to balance optimal performance and prevent overheating, ensuring consistent output across a wide range of operating conditions. Multi-volt 10-30V DC input at 1.8A at 13.8V is compatible with 12V and 24V systems. Over/under voltage and reverse polarity protection alongside EMI/EMC radio interference approval. Simple 2-wire installation via 2-pin Deutsch plug. CTA approved for reverse function use (CTA-062220). Backed by a 5-year warranty. Features & Benefits 2200 Lumens Flood Beam Output: The RWL9424SF delivers 2200 lumens of broad flood beam illumination suited to reversing, work area, and task lighting applications on vehicles and equipment. 4 Osram LEDs - Super White Output: Four Osram LEDs produce a super-white output close to daylight colour temperature for accurate colour rendering and clear visibility during work operations. Thermal Management Technology: Roadvision's Thermal Management Technology actively monitors and adjusts to the environmental temperature, balancing optimal LED output with overheating prevention for consistent performance and long-term reliability in varying ambient conditions. Compact Square 95 x 71 x 41mm Design: The compact square form factor is suited to installations where space is limited, including reverse lamp positions, toolboxes, service bodies, and bumper bar mounting locations. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and effective heat dissipation, while the polycarbonate lens resists impact and UV degradation in demanding outdoor environments. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated lifespan with maintenance-free solid-state technology provides long-term reliability in continuous work lighting and reversing applications. Multi-Volt 10-30V DC with Low Current Draw: The 10-30V DC multi-volt input at 1.8A at 13.8V is compatible with both 12V and 24V vehicle and equipment electrical systems. Over/Under Voltage and Reverse Polarity Protection: Electronic protection safeguards the LED driver from voltage fluctuations and wiring errors. EMI/EMC Radio Interference Approved: Confirmed compatible with vehicle communication and electronic systems without interference. CTA Reverse Function Approval (CTA-062220): The RWL9424SF holds CTA approval for reverse function use (CTA-062220), confirming suitability for use as a reverse lamp on vehicles and trailers. 2-Pin Deutsch Plug for Simple 2-Wire Installation: Secure, weatherproof, and vibration-resistant 2-wire connection. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL9424SF Brand Roadvision Series RWL94 Description 94 Series LED Work Lamp 32W Flood - Square Beam Type Flood Beam Maximum Lumens 2200lm Maximum Watts 25W LED Quantity 4 Osram LEDs Input Voltage 10-30V DC Current Draw 1.8A at 13.8V Dimensions 95mm x 71mm x 41mm Shape Square Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring 2-Pin Deutsch Plug Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved CTA Approval Reverse Function - CTA-062220 LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL9424SF is compatible with 10-30V DC vehicle and equipment electrical systems including 12V and 24V platforms. CTA approved for reverse function applications. The 2-pin Deutsch plug provides a secure weatherproof 2-wire connection. A round version with identical specifications is available as the RWL9424RF. Frequently Asked Questions Is the RWL9424SF approved for use as a reverse lamp? Yes. The RWL9424SF holds CTA approval for reverse function use (CTA-062220), confirming suitability for use as a reverse lamp on vehicles and trailers. What is Thermal Management Technology on the RWL9424SF? Roadvision's Thermal Management Technology actively monitors and adjusts to the ambient temperature during operation, balancing optimal LED output with overheating prevention. This ensures consistent light output and long-term reliability across varying operating conditions and ambient temperatures. Is the RWL9424SF compatible with 24V vehicles? Yes. The RWL9424SF operates across 10-30V DC, making it compatible with both 12V and 24V vehicle and equipment electrical systems. What is the difference between the RWL9424SF and the RWL9424RF? Both are identical in LED configuration, output, beam pattern, electrical specifications, and approval ratings. The RWL9424SF is square and measures 95 x 71 x 41mm. The RWL9424RF is round and measures 98 x 75 x 41mm. Choose based on the mounting location and aesthetic preference for your specific installation. What is the rated LED lifespan of the RWL9424SF? The RWL9424SF has a rated LED lifespan of 50,000 hours with maintenance-free solid-state technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less