As a True-Marine Product, The Signature Series Marine Amplifiers are Designed and Engineered for the Harsh Marine Environment Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3 year consumer warranty. Our most efficient, stunning and powerful amplifier series features Class-D Technology. The highly efficient 1600 Watt amplifier design ensures lower battery drain with a higher output in comparison with Class-AB amplifiers. This delivers increased power to the connected speakers and/or subwoofers, extending your audio entertainment experience to a whole new level. Features: Class-D Amplifier Technology - Enjoy your music for longer and take your audio entertainment experience to a whole new level with amplifiers that are built for high performance. The highly efficient Class-D design draws less current than a standard Class-AB amplifier, providing increased efficiency and power output to your speakers. Marine-Ready Design - Extending the life of your amplifiers, the Signature Series are designed specifically for marine use with conformal coated PCBs to provide extra protection from the marine elements. Rigid Aluminum Alloy Heat Sink - Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation. Stainless Mirror Finish - The polished stainless-steel control panel cover conceals and protects all cable connections and settings controls whilst providing an attractive finish to complement any installation. Specifications: Amplifier Class: Class-D Subwoofer Frequency Response: 10Hz - 50kHz Peak Power: 1600 Watts Rated Power (4 Ohms): 80 Watts RMS x 4 + 250 Watts RMS x 1 @ 14.4V - 4 Ohms 1% THD Rated Power (2 Ohms): 130 Watts RMS x 4 + 330 Watts RMS x 1 @ 14.4V - 2 Ohms 1% THD Rated Power (4 Ohms Bridged): 250 Watts RMS x 2 @ 14.4V - 4 Ohms Bridged 1% THD + 250 Watts RMS x 1 @ 14.4V - 4 Ohms 1% THD Gift Box Dimension: (W) 379mm (14-15/16‚Äù) (H) 110mm (4-5/16‚Äù) (D) 268mm (10-9/16‚Äù) Height: 50mm [2‚Äù] Length: 300mm [11-13/16‚Äù] Depth: 210mm [8-1/4‚Äù] Legendary Products & Support From Authorized Dealers When you choose Fusion, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Fusion dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Fusion's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Fusion dealer today!

Read more less

Complete 5-channel Class D system amplification engineered for audiophile-grade component speaker systems plus dedicated subwoofer control. Product Overview The JL Audio XDM700/5 5-channel amplifier delivers comprehensive system amplification for complete marine and automotive installations requiring four satellite speakers plus a dedicated subwoofer channel. With 75W RMS × 4 for main speakers at 4Ω and 300W RMS for the subwoofer at 2Ω (700W total), this marine-rated Class D platform drives complete audiophile-grade systems from a single compact chassis. Built using JL Audio's advanced NexD™ high-speed switching design, the 12V configuration integrates seamlessly into standard automotive and marine electrical systems while the conformal-coated marine-grade construction withstands Australia's harshest coastal conditions, bilge moisture, and dusty 4WD environments. The sophisticated signal processing architecture enables true 3-way crossover configuration: high-pass filter for front channels (50Hz-5kHz range with x10 multiplier), high-pass or bandpass filter for rear channels (50Hz-500Hz), and variable-slope low-pass filter (12dB or 24dB/octave) for the subwoofer channel. This flexibility allows precise system tuning for component speakers, coaxials, and subwoofers in demanding installations. Automatic turn-on capability via signal sensing or DC-offset sensing simplifies integration with factory systems. At 260mm wide, 2.79kg, and featuring a gasketed removable top cover, the XDM700/5 represents the ultimate single-amplifier solution for Australian marine enthusiasts and automotive audio specialists demanding complete system control without multiple amplifiers. Key Specifications 5-channel Class D amplifier (4 main channels + 1 dedicated subwoofer channel) Main channels maximum rated power (14.4V @ 2Ω, <1% THD): 100W RMS × 4 (400W total) Main channels power at 4Ω load (14.4V @ 4Ω, <1% THD): 75W RMS × 4 (300W total) Main channels bridged power (14.4V @ 4Ω, <1% THD): 200W RMS × 2 (400W total bridged) Subwoofer channel maximum power (14.4V @ 2Ω, <1% THD): 300W RMS × 1 Subwoofer channel power at 3Ω load (14.4V @ 3Ω, <1% THD): 240W RMS × 1 Subwoofer channel power at 4Ω load (14.4V @ 4Ω, <1% THD): 180W RMS × 1 Main channels power at 2Ω load (12.5V @ 2Ω, <1% THD): 90W RMS × 4 (360W total) Main channels power at 4Ω load (12.5V @ 4Ω, <1% THD): 60W RMS × 4 (240W total) Main channels bridged power (12.5V @ 4Ω, <1% THD): 180W RMS × 2 (360W total bridged) Subwoofer channel power at 2Ω load (12.5V @ 2Ω, <1% THD): 300W RMS × 1 Subwoofer channel power at 3Ω load (12.5V @ 3Ω, <1% THD): 240W RMS × 1 Subwoofer channel power at 4Ω load (12.5V @ 4Ω, <1% THD): 180W RMS × 1 Operating voltage: 11-14.5 VDC (12V systems only) Frequency response (Main channels): 12Hz-22kHz (+0, -1dB) Frequency response (Subwoofer channel): 10Hz-1kHz (+0, -1dB) Signal-to-noise ratio (Main channels): >104dB (A-weighted, 20Hz-20kHz, referred to highest rated power) Signal-to-noise ratio: >84dB (A-weighted, 20Hz-20kHz, referred to 1W) Damping factor @ 4Ω: >150 @ 50Hz Damping factor @ 2Ω: >75 @ 50Hz THD+N (Main channels): <1% @ rated power, 2Ω per channel THD+N (Subwoofer channel): <1% @ rated power, 2Ω per channel Input voltage range: 200mV-4V RMS at RCA inputs Channel input mode switch: Yes (2/4/6 channel modes) Dimensions: 260mm (W) × 180mm (D) × 52mm (H) Weight: 2.79kg (6.15 lbs) Fuse rating: 60A (AFS, AGU or MaxiFuse™ recommended) Minimum power/ground wire: 4 AWG copper Remote level control: Optional HD-RLC or MHD-RLC (water-resistant) Remote level modes: Subwoofer channel only or all channels Automatic turn-on: Signal sensing or DC-offset sensing Marine-grade construction with gasketed removable top cover 3-year manufacturer warranty Filter Specifications: Channels 1 & 2 (Front): High-Pass only, 12dB/octave, 50Hz-5kHz range (with x10 multiplier: 500Hz-5kHz) Channels 3 & 4 (Rear): High-Pass or Bandpass, 12dB/octave, 50Hz-500Hz range Subwoofer Channel: Low-Pass only, 12dB or 24dB/octave (selectable), 50Hz-500Hz range Detented, calibrated filter potentiometers: Yes Filter defeat function: Yes Infrasonic filter: None Features & Benefits Complete System Amplification from Single ChassisDrive four satellite speakers plus a dedicated subwoofer without multiple amplifiers cluttering your installation. The 5-channel architecture delivers 75W × 4 for component or coaxial speakers while simultaneously providing 300W for a 10" or 12" subwoofer. Eliminates the complexity of separate 4-channel and monoblock amplifiers, reduces wiring bulk, simplifies power distribution, and frees valuable installation space in boats, utes, and caravans. Perfect for complete audiophile-grade systems in single-amplifier installations. Advanced NexD™ Class D TopologyJL Audio's proprietary NexD™ high-speed switching design delivers full-bandwidth Class D operation with exceptionally low distortion and remarkable efficiency. The marine-grade conformal coating resists salt spray, bilge moisture, and corrosive environments encountered in Australian coastal boating, offshore fishing, and beach-launched vessels. Robust construction handles tropical humidity in Far North Queensland, dusty corrugated tracks in the Outback, and Southern Ocean conditions off Tasmania. Engineered for installations demanding reliability without compromise. True 3-Way Crossover CapabilityConfigure as a sophisticated 3-way system: high-pass filter on front channels (tweeters/midrange), bandpass filter on rear channels (midrange/midbass), and low-pass filter on subwoofer channel. The x10 multiplier switch on channels 1&2 extends the high-pass range from 50Hz-500Hz to 500Hz-5kHz, enabling precise tweeter protection and component system integration. Detented, calibrated potentiometers ensure repeatable settings—critical for professional installers servicing multiple similar builds or enthusiasts fine-tuning complex systems. Flexible Main Channel FilteringFront channels (1&2) feature high-pass-only filtering with 50Hz-5kHz range, ideal for protecting component speakers from damaging low frequencies. Rear channels (3&4) offer high-pass or bandpass modes with 50Hz-500Hz range, providing flexibility for full-range coaxials or mid-bass duties in 3-way configurations. The independent filter architecture allows front and rear speakers to operate at different frequency ranges, maximizing system performance without external processors. Variable-Slope Subwoofer ControlThe dedicated subwoofer channel features selectable 12dB or 24dB/octave low-pass slopes with 50Hz-500Hz continuously variable range. Use 12dB slopes for sealed enclosures requiring gentler roll-off, or 24dB slopes for ported enclosures needing steeper cutoff near tuning frequency. The 300W output at 2Ω drives single 12" subwoofers with authority, while the 240W at 3Ω suits dual 6Ω subs wired in parallel—providing flexibility for various subwoofer configurations. Automatic Turn-On CapabilityDual-mode turn-on detection (signal sensing or DC-offset sensing) enables seamless integration with factory audio systems or aftermarket source units. Eliminates the need for separate remote turn-on wiring in many installations, simplifying OEM integration for fleet applications or factory system upgrades. Critical for installations where installers need reliable operation without complex wiring modifications to factory electrical systems. Optional Remote Level ControlAdd JL Audio's HD-RLC or MHD-RLC (not included) for convenient output adjustment from the helm, driver's seat, or entertainment area. Switch between two modes: adjust subwoofer channel only (preserve main speaker levels while controlling bass), or adjust all channels simultaneously (master volume control). Essential for marine applications where the amplifier is mounted in inaccessible equipment bays, or quick bass adjustments between moored listening and underway conditions. Channel Input Mode SwitchConfigure input channels for 2-channel, 4-channel, or 6-channel operation depending on source unit preamp outputs. This flexibility accommodates various head unit configurations: use 2-channel mode with simple stereo sources, 4-channel mode with front/rear preouts, or 6-channel mode with dedicated subwoofer preout. Simplifies integration across different source equipment without external summing or Y-cables. Technical Specs Amplifier class: Class D (NexD™ high-speed switching design) Channels: 5 (4 main channels + 1 dedicated subwoofer channel) Operating voltage: 11-14.5 VDC (12V models only - NOT 24V compatible) Main Channels Power Output (Channels 1, 2, 3, 4): Maximum rated power (14.4V @ 2Ω, <1% THD): 100W RMS × 4 (400W total) Power at 4Ω load (14.4V @ 4Ω, <1% THD): 75W RMS × 4 (300W total) Bridged power (14.4V @ 4Ω, <1% THD): 200W RMS × 2 (400W total bridged) Power at 2Ω load (12.5V @ 2Ω, <1% THD): 90W RMS × 4 (360W total) Power at 4Ω load (12.5V @ 4Ω, <1% THD): 60W RMS × 4 (240W total) Bridged power (12.5V @ 4Ω, <1% THD): 180W RMS × 2 (360W total bridged) Subwoofer Channel Power Output (Channel 5): Maximum rated power (14.4V @ 2Ω, <1% THD): 300W RMS × 1 Power at 3Ω load (14.4V @ 3Ω, <1% THD): 240W RMS × 1 Power at 4Ω load (14.4V @ 4Ω, <1% THD): 180W RMS × 1 Power at 2Ω load (12.5V @ 2Ω, <1% THD): 300W RMS × 1 Power at 3Ω load (12.5V @ 3Ω, <1% THD): 240W RMS × 1 Power at 4Ω load (12.5V @ 4Ω, <1% THD): 180W RMS × 1 Frequency response (Main channels, +0/-1dB): 12Hz-22kHz Frequency response (Subwoofer channel, +0/-1dB): 10Hz-1kHz Signal-to-noise ratio (Main channels, A-weighted, 20Hz-20kHz, referred to highest rated power): >104dB Signal-to-noise ratio (referred to 1W, A-weighted, 20Hz-20kHz): >84dB Damping factor @ 4Ω: >150 @ 50Hz Damping factor @ 2Ω: >75 @ 50Hz THD+N @ rated power (Main channels): <1% @ 2Ω per channel THD+N @ rated power (Subwoofer channel): <1% @ 2Ω per channel Input voltage range @ RCA inputs: 200mV-4V RMS Signal Processing: Filter mode (Channels 1 & 2 - Front): High-Pass only Filter slope (Channels 1 & 2 - Front): 12dB/octave Filter frequency range (Channels 1 & 2 - Front): 50Hz-5kHz (with x10 multiplier: 500Hz-5kHz) Filter mode (Channels 3 & 4 - Rear): High-Pass or Bandpass Filter slope (Channels 3 & 4 - Rear): 12dB/octave Filter frequency range (Channels 3 & 4 - Rear): 50Hz-500Hz Filter mode (Subwoofer Channel): Low-Pass only Filter slope (Subwoofer Channel): 12dB/octave or 24dB/octave (selectable) Filter frequency range (Subwoofer Channel): 50Hz-500Hz Detented, calibrated filter potentiometers: Yes Filter defeat function: Yes Infrasonic filter: None Channel input mode switch: Yes (2/4/6 channel modes) Pass-through preamp output: None Remote level control compatibility: Optional HD-RLC or MHD-RLC (water-resistant) Remote level modes: Subwoofer channel only or all channels Automatic turn-on: Signal sensing or DC-offset sensing Recommended fuse type: AFS, AGU or MaxiFuse™ Fuse rating: 60A Minimum copper power/ground wire gauge: 4 AWG Physical dimensions (W × D × H): 260mm × 180mm × 52mm (10.23" × 7.09" × 2.05") Weight: 2.79kg (6.15 lbs) Construction: Marine-grade materials with gasketed removable top cover Finish: Black powder-coat Warranty: 3 years Important Note: This is the 12V model. The XDM series includes 24V variants in some configurations, but this 5-channel model operates on standard 12V automotive/marine electrical systems only. Compatible With / Goes Well With Speaker Recommendations: Component speaker systems rated 75-100W RMS (front and/or rear) Marine coaxial speakers rated 75-100W RMS (6", 6.5", 6×9" sizes) Marine subwoofers rated 180-300W RMS (10" or 12" single-voice-coil or dual-voice-coil) Tower speakers rated 150-200W RMS (when bridging main channels) Installation Accessories: 4 AWG amplifier wiring kit with 60A+ inline fuse holder JL Audio HD-RLC or MHD-RLC water-resistant remote level control Marine-grade speaker wire (14-16 AWG for main channels, 12-14 AWG for subwoofer) RCA interconnect cables with marine-grade shielding (5-channel distribution or individual runs) Distribution blocks for clean power/ground distribution Heavy-duty amplifier mounting brackets or marine-rated equipment racks Sound deadening material for mounting surfaces and subwoofer enclosures System Compatibility: Marine head units with multi-channel preamp outputs (minimum 2-channel, ideal 4-6 channel) Aftermarket head units with subwoofer preamp output Marine DSP processors with 5-6 channel output capability Line output converters for factory radio integration 12V electrical systems with adequate alternator capacity (90A+ recommended) Subwoofer Configurations: Single 2Ω subwoofer (300W) - maximum power Single 4Ω subwoofer (180W) - lower power draw Dual 6Ω subwoofers wired in parallel (240W total @ 3Ω) - unique configuration Single dual-voice-coil 4Ω subwoofer wired to 2Ω (300W) - maximum flexibility Electrical System Requirements: Minimum 90A alternator capacity for sustained full-power operation Adequate battery reserve (AGM or lithium recommended for extended engine-off listening) Proper grounding with dedicated ground point to chassis/hull 4 AWG power and ground wiring with proper routing and protection Caution: Five-channel systems require careful planning. Ensure your head unit or DSP provides adequate preamp outputs (minimum 2-channel stereo plus subwoofer preout). The subwoofer channel does NOT support 1.5Ω loads—minimum 2Ω impedance required. Verify subwoofer impedance and wiring configuration before connection to avoid damage. Weight 2.79kg (6.15 lbs) Frequently Asked Questions Can I run component speakers on all four main channels?Yes. The XDM700/5 is ideal for two pairs of component speakers (front and rear) plus a subwoofer. Use the high-pass filter on channels 1&2 for front components, high-pass or bandpass on channels 3&4 for rear components, and low-pass on the subwoofer channel. The x10 multiplier on channels 1&2 allows tweeter protection up to 5kHz. What's the difference between the high-pass and bandpass filter modes on channels 3&4?High-pass mode passes frequencies above the cutoff point (50Hz-500Hz)—ideal for full-range coaxial speakers. Bandpass mode passes frequencies within a specific range—useful for 3-way systems where channels 3&4 handle midrange duties between tweeters (channels 1&2) and subwoofer (channel 5). Configure based on your speaker type and system design. Can I bridge the main channels for higher power to tower speakers?Yes. Bridge channels 1+2 and/or 3+4 for 200W per bridged pair at 4Ω load. This is perfect for marine tower speakers requiring more power than the 75-100W per channel. Note that bridging disables individual channel filtering—use external crossovers or full-range tower speakers when bridged. What subwoofer impedance should I use for maximum power?Wire your subwoofer to 2Ω for maximum 300W output. Use a single 2Ω subwoofer, or a dual-voice-coil 4Ω subwoofer wired in parallel to achieve 2Ω. The amplifier does NOT support 1.5Ω loads. At 4Ω, the amp delivers 180W—adequate for many applications with lower electrical system demands. How do I set up the remote level control for subwoofer-only adjustment?Connect the optional HD-RLC or MHD-RLC remote and configure the amplifier's remote level mode switch to "Sub Channel" mode. This allows bass adjustment without affecting main speaker volumes—perfect for compensating between moored and underway listening, or adjusting bass levels based on music genre without retuning the entire system.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Flagship 5-channel Class D system amplification engineered for maximum power delivery with advanced NexD™ technology and thermal rollback protection. Product Overview The JL Audio XDM1000/5 5-channel amplifier represents the pinnacle of JL Audio's XDM series, delivering 1000W total system power for complete marine and automotive installations requiring four satellite speakers plus a high-output subwoofer channel. Built using JL Audio's advanced NexD™ high-speed switching design achieving over 80% total amplifier efficiency, this marine-rated Class D platform provides exceptional power output while minimizing electrical system demands. The 12V configuration integrates seamlessly into standard automotive and marine electrical systems, while the all-aluminum powder-coated housing with sealed security cover protects against corrosion and the elements in Australia's harshest coastal conditions. The sophisticated architecture features studio-grade signal processing with fully variable filters and calibrated potentiometers beneath the sealed security cover. Advanced rollback protection ensures the amplifier never shuts down due to thermal overload—innovative circuit design keeps the music playing even under demanding conditions by intelligently managing power output. Automatic turn-on capability offers three options: auto signal sensing with +12V remote out, auto DC-offset sensing with +12V remote out, or conventional +12V turn-on lead. At 374mm wide with exclusive dual-mode input filter for outstanding noise rejection, the XDM1000/5 represents the ultimate single-amplifier solution for Australian marine enthusiasts and automotive audio specialists demanding maximum system power without multiple amplifiers. Key Specifications 5-channel Class D amplifier with NexD™ technology (4 main channels + 1 dedicated subwoofer channel) Total system power: 1000W RMS Operating voltage: 11-14.5 VDC (12V systems only) Amplifier efficiency: >80% (NexD™ high-speed switching design) Dimensions: 374mm (W) × 180mm (D) × 52mm (H) Weight: Not specified All-aluminum powder-coated housing for corrosion resistance Sealed security cover protects controls from elements Studio-grade signal processing with fully variable filters Calibrated potentiometers for precise tuning Advanced rollback protection prevents thermal shutdown Automatic turn-on: 3 modes (signal sensing, DC-offset sensing, or +12V remote) Exclusive dual-mode input filter for noise rejection Differential-balanced inputs for crystal-clear audio performance Marine-grade construction suitable for boats or cars 2-year manufacturer warranty Note: Detailed power ratings per channel, filter specifications, and technical measurements are not provided in supplier documentation. Contact manufacturer for complete specifications. Features & Benefits Advanced NexD™ High-Efficiency TechnologyJL Audio's proprietary NexD™ high-speed switching design achieves total amplifier efficiencies exceeding 80%—significantly higher than conventional Class D amplifiers. This exceptional efficiency reduces current draw from your electrical system, minimizes heat generation, and permits reliable high-power 1000W output from a compact chassis. Critical for Australian marine applications where electrical capacity is limited, or 4WD touring setups where auxiliary battery runtime matters during extended camping scenarios. Advanced Rollback Protection SystemInnovative circuit design ensures the amplifier never experiences complete thermal shutdown—a common frustration with traditional amplifiers during extended high-output sessions. The advanced rollback protection intelligently manages power output when thermal conditions approach limits, keeping the music playing even under demanding conditions like beach parties, boat rallies, or outback camping. Unlike conventional thermal protection that abruptly cuts power, the XDM1000/5 gracefully manages output to maintain continuous operation. Studio-Grade Signal ProcessingBeneath the sealed security cover lies audiophile-grade signal processing with fully variable filters and calibrated potentiometers. The precision controls enable sophisticated system tuning for component speakers, coaxials, and subwoofers in demanding installations. Calibrated potentiometers ensure repeatable settings—critical for professional installers servicing multiple similar builds or enthusiasts fine-tuning complex systems without external DSP processors. Exclusive Dual-Mode Input FilterJL Audio's proprietary dual-mode input filter combined with differential-balanced inputs delivers outstanding noise rejection and crystal-clear audio performance in boats or cars. The filter automatically adapts to electrical noise characteristics common in marine environments (alternator whine, bilge pump interference) or automotive installations (ignition noise, accessory interference). Critical for maintaining audiophile-grade sound quality in electrically noisy environments where conventional amplifiers produce audible interference. Triple Auto Turn-On CapabilityChoose from three automatic turn-on options based on your installation: auto signal sensing with +12V remote out (detects audio signal on RCA inputs), auto DC-offset sensing with +12V remote out (detects DC voltage from source unit), or conventional +12V turn-on lead (standard remote wire). The signal/DC-offset sensing modes eliminate the need for separate remote wiring in many factory system upgrades, simplifying integration in commercial fleet applications or vessels where complex wiring modifications aren't practical. Marine-Grade Corrosion ResistanceThe all-aluminum powder-coated housing inhibits corrosion in Australian coastal conditions, salt spray, and bilge moisture. The sealed security cover protects controls and circuitry from the elements—critical for installations in wet bilges, exposed cockpit areas, or poorly sealed cargo compartments in 4WD vehicles. Unlike conventional amplifiers with exposed heatsinks and control surfaces, the XDM1000/5 maintains long-term reliability in harsh marine environments from tropical Queensland humidity to Southern Ocean salt spray. Compact Flagship ChassisAt 374mm wide, the XDM1000/5 delivers flagship 1000W system power in a chassis that fits locations where traditional high-power amplifiers won't mount. The extended footprint accommodates substantial power supply components and heat sink area while maintaining the low 52mm profile essential for under-seat, behind-panel, or shallow equipment bay installations. Multiple configuration options enable mounting horizontally, vertically, or in dedicated amplifier racks depending on available space. Technical Specs Amplifier class: Class D (NexD™ high-speed switching design) Channels: 5 (4 main channels + 1 dedicated subwoofer channel) Total system power: 1000W RMS Operating voltage: 11-14.5 VDC (12V models only - NOT 24V compatible) Amplifier efficiency: >80% (NexD™ technology) Signal Processing: Studio-grade signal processing with fully variable filters Calibrated potentiometers for precise, repeatable tuning Exclusive dual-mode input filter for noise rejection Differential-balanced inputs for superior audio performance Protection & Control: Advanced rollback protection (prevents thermal shutdown) Automatic turn-on options: Signal sensing / DC-offset sensing / +12V remote +12V remote output capability (for daisy-chaining additional equipment) Physical Specifications: Dimensions (W × D × H): 374mm × 180mm × 52mm (14.73" × 7.09" × 2.05") Weight: Not specified Housing: All-aluminum powder-coated construction Protection: Sealed security cover over controls and circuitry Finish: Black powder-coat Warranty: 2 years Important Note: This is the 12V model. Detailed power output specifications per channel, filter frequencies, slopes, fuse rating, and wire gauge requirements are not provided in available documentation. Contact JL Audio or authorized dealers for complete technical specifications before installation planning. Compatible With / Goes Well With Speaker Recommendations: Component speaker systems for main channels Marine coaxial speakers for main channels High-output marine subwoofers (power handling dependent on actual channel specifications) Tower speakers (verify bridging capability and power ratings) Installation Accessories: Heavy-gauge amplifier wiring kit (gauge dependent on actual specifications) Marine-grade speaker wire RCA interconnect cables with marine-grade shielding (5-channel distribution) Distribution blocks for power/ground distribution Heavy-duty amplifier mounting brackets or marine-rated equipment racks Sound deadening material for mounting surfaces System Compatibility: Marine head units with multi-channel preamp outputs Aftermarket head units with subwoofer preamp output Marine DSP processors with 5-channel output capability Line output converters for factory radio integration 12V electrical systems with adequate alternator capacity Electrical System Requirements: High-output alternator recommended for 1000W total system power Adequate battery reserve (AGM or lithium recommended) Proper grounding with dedicated ground point to chassis/hull Heavy-gauge power and ground wiring (consult installation manual) Caution: Detailed specifications including power output per channel, impedance compatibility, fuse rating, and wire gauge requirements are not provided in available documentation. Consult JL Audio technical support or authorized dealers before purchase to ensure compatibility with your speakers and electrical system. Weight Not specified Frequently Asked Questions What makes the XDM1000/5 different from the XDM700/5?The XDM1000/5 delivers 1000W total system power versus the XDM700/5's 700W, representing a 43% increase in output capability. The 1000W model features the extended 374mm chassis for enhanced power supply and thermal management, enabling higher sustained output levels for demanding applications requiring maximum bass authority and main speaker headroom. What is advanced rollback protection and how does it work?Unlike traditional thermal protection that abruptly shuts down the amplifier when overheating, advanced rollback protection intelligently reduces output gradually when approaching thermal limits. This keeps the music playing continuously—albeit at slightly reduced levels—rather than experiencing frustrating shutdowns during extended high-output sessions at anchor or beach parties. How does the NexD technology benefit my electrical system?NexD™ high-speed switching achieves over 80% efficiency, meaning less current draw from your battery and alternator compared to conventional amplifiers producing the same power. This reduces strain on your electrical system, minimizes heat generation requiring cooling, and extends battery runtime during engine-off listening—critical for marine applications and remote camping scenarios. Which automatic turn-on mode should I use?Use signal sensing for most aftermarket head units (detects audio on RCA inputs), DC-offset sensing for many factory systems (detects DC voltage from source unit output), or conventional +12V remote for guaranteed compatibility with any source unit providing remote turn-on output. Try signal or DC-offset modes first to eliminate remote wire runs in complex installations. Is this amplifier suitable for saltwater marine environments?Yes. The all-aluminum powder-coated housing resists corrosion, and the sealed security cover protects controls and circuitry from salt spray and moisture. However, mount away from direct water streams, bilge flooding, or areas subject to washdown. Pair with marine-grade wiring and heat-shrink connections for long-term reliability in coastal conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate PM1000X5 Punch Marine 1000W 5-Channel Amplifier One Amplifier. Your Entire System. Product Overview The Rockford Fosgate PM1000X5 is a 1000 Watt 5-channel amplifier purpose-built for marine and motorsport environments, combining Class A/B topology on the four full-range channels with Class-BD topology on the dedicated 5th subwoofer channel. Designed as a complete single-amplifier solution for a full marine audio system, the PM1000X5 drives dash speakers on the front channels, cockpit or transom speakers on the rear channels, and a subwoofer or subwoofer system on the high-efficiency 5th channel eliminating the need for multiple amplifiers and simplifying installation on boats, UTVs, and powersport vehicles where wiring space and mounting real estate are at a premium. The 5th channel Class-BD topology delivers higher efficiency and lower heat generation than a Class A/B subwoofer channel at equivalent power levels, complementing the sonic accuracy of the Class A/B front and rear channels across a complete system. Marine-grade two-part epoxy conformal-coated circuit boards, stainless steel hardware, tri-stage protection covering thermal, over-current, and short circuits, a cast aluminium heatsink, 2/4 channel input switch, infrasonic filter, on-board Punch EQ, 12 dB/octave Butterworth crossover, C.L.E.A.N. signal setup, and optional PLC2 remote level control make the PM1000X5 a fully specified marine system amplifier in a single unit. Key Specifications Channels: 5 (4 full-range + 1 subwoofer) Total power: 1000W Front/rear channel topology: Class A/B Subwoofer channel topology: Class-BD Crossover: 12 dB/octave Butterworth (HP/LP) Punch EQ: 0 dB to +18 dB @ 45 Hz Infrasonic filter: Yes Input switch: 2/4 channel Auto Turn-On: Yes (via high-level input) C.L.E.A.N. signal setup: Yes Remote level control: Optional PLC2 (sold separately) Circuit board protection: Marine-grade two-part epoxy conformal coating Hardware: Marine-grade stainless steel Heatsink: Cast aluminium Protection: Tri-stage thermal / over-current / short circuit Control panel: Stealth top-mounted Muted turn-on: Yes Dimensions: Confirm with supplier Shipping weight: Confirm with supplier Features & Benefits Complete 5-channel single-amplifier marine system solution: The PM1000X5 powers an entire marine audio system from one unit. Front channels drive dash or helm speakers, rear channels drive cockpit or transom speakers, and the dedicated 5th channel drives a subwoofer or subwoofer system eliminating the cost, complexity, and wiring demands of running multiple separate amplifiers across a full marine installation. Class A/B front and rear channels for full-range accuracy: The four full-range channels use Class A/B topology, delivering the sonic accuracy and dynamic headroom preferred for marine speaker applications where tonal quality and midrange clarity are priorities across a full listening area. Class-BD 5th subwoofer channel for high-efficiency bass: The dedicated subwoofer channel uses Class-BD topology, delivering higher efficiency and lower heat generation than an equivalent Class A/B subwoofer channel. More of the available power reaches the subwoofer rather than being lost as heat particularly important in marine enclosures where thermal management is a real constraint. Infrasonic filter: Removes sub-audible frequencies below the subwoofer's useful operating range that consume amplifier power and cause excessive cone excursion without producing audible bass. Essential for protecting subwoofers in sealed marine enclosures from over-excursion at high volumes particularly useful when streaming music sources that may contain infrasonic content. 2/4 channel input switch: Drive all five output channels from just two RCA inputs when the source unit has limited preamp outputs. Eliminates the need for Y-adapters in marine and powersport installs where head unit RCA outputs are often limited. Tri-stage protection thermal, over-current, short circuit: Three independent protection circuits continuously monitor the amplifier, shutting down safely before damage occurs. Comprehensive protection for a single-amplifier system where a failure would take the entire installation offline. Marine-grade two-part epoxy conformal PCB coating: Circuit boards sealed against moisture, humidity, and salt spray essential for open-water use in coastal and estuarine conditions across Australia. Consistent with the conformal coating standard across the entire Rockford Fosgate Punch Marine amplifier range. Marine-grade stainless steel hardware: All fasteners resist corrosion in saltwater and humid environments for long-term mechanical integrity. Cast aluminium heatsink: Manages combined thermal output from Class A/B and Class-BD topologies across five channels, ensuring sustained performance in the high ambient temperatures common on Australian watercraft and powersport vehicles. High-level input with Auto Turn-On: Connects directly to factory head units via speaker-level outputs without requiring a dedicated remote turn-on wire. Ideal for OEM integration in boats and powersport vehicles without aftermarket head units. C.L.E.A.N. signal detection: LED-based real-time THD monitoring for accurate gain structure setup without test equipment practical for field installation on vessels and powersport vehicles. On-board Punch EQ (+18 dB @ 45 Hz): Dial in bass emphasis from the helm or install panel without an external equaliser. Effective in open-air marine environments where low-frequency energy dissipates rapidly. 12 dB/octave Butterworth crossover: Precise HP/LP crossover control for accurate frequency management across full-range and subwoofer channels in the same system. Optional PLC2 remote Punch Level Control: Helm or dash-mounted remote bass volume adjustment with input clip indicator. Sold separately. Muted turn-on: Eliminates startup pop or thump on system power-up. Stealth top-mounted control panel: All gain, crossover, EQ, and filter adjustments accessible from the top of the unit for clean installation and straightforward tuning. Technical Specs Specification Detail SKU PM1000X5 Brand Rockford Fosgate Number of Channels 5 (4 full-range + 1 subwoofer) Total Power 1000W Front/Rear Channel Topology Class A/B Subwoofer Channel Topology Class-BD Crossover 12 dB/octave Butterworth (HP/LP) Punch EQ 0 dB to +18 dB @ 45 Hz Infrasonic Filter Yes Input Switch 2/4 channel Signal Input High-level and low-level RCA Auto Turn-On Yes (via high-level input) C.L.E.A.N. Setup Yes Remote Level Control Optional PLC2 (sold separately) Muted Turn-On Yes Control Panel Stealth top-mounted Circuit Board Protection Marine-grade two-part epoxy conformal coating Hardware Marine-grade stainless steel Heatsink Cast aluminium Protection Tri-stage thermal / over-current / short circuit Rated Power (per channel) Confirm with supplier CEA-2006 Compliant Confirm with supplier Dimensions Confirm with supplier Shipping Weight Confirm with supplier Warranty Confirm with supplier Compatible With Marine vessels requiring a complete single-amplifier system solution: bow riders, pontoons, ski boats, centre console fishing boats, and tinnies Powersport applications: UTVs, side-by-sides, and off-road 4WDs with full speaker and subwoofer systems Factory and aftermarket marine head units with RCA or high-level outputs Rockford Fosgate Punch and Prime marine speakers (front and rear channels) Rockford Fosgate marine subwoofers (5th channel Class-BD) Optional Rockford Fosgate PLC2 Punch Level Control (sold separately) Rockford Fosgate PMX-series source units and display heads Vessels and vehicles where installing multiple separate amplifiers is impractical Frequently Asked Questions How does the PM1000X5 power a complete marine audio system? The PM1000X5 drives four full-range speakers across its front and rear Class A/B channels and a subwoofer or subwoofer system on the dedicated 5th Class-BD channel covering an entire marine or powersport audio system from a single amplifier without needing additional units for the subwoofer channel. What is the difference between Class A/B and Class-BD in the PM1000X5? The four full-range channels use Class A/B topology for sonic accuracy and dynamic headroom across the full frequency range. The 5th subwoofer channel uses Class-BD topology for higher efficiency and lower heat generation at bass frequencies delivering more power to the subwoofer with less thermal stress than a Class A/B subwoofer channel of equivalent output. What does the infrasonic filter do? The infrasonic filter removes sub-audible frequencies below the subwoofer's useful operating range from the 5th channel signal. These frequencies consume amplifier power and cause excessive cone excursion without producing audible bass the filter protects the subwoofer from over-excursion at high volumes and improves overall system efficiency, particularly when streaming music sources that may contain infrasonic content. Can the PM1000X5 connect to a factory head unit? Yes. The high-level input with Auto Turn-On allows direct connection to factory speaker outputs without a dedicated remote turn-on wire. The 2/4 channel input switch also allows all five output channels to be driven from just two RCA inputs when the source unit has limited preamp outputs. Is the PM1000X5 suitable for saltwater marine environments? Yes. The PM1000X5 is built with marine-grade two-part epoxy conformal-coated circuit boards and stainless steel hardware, designed to withstand the moisture, salt spray, humidity, and vibration conditions of open saltwater and estuarine environments common across Australian coastal use. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate M2-750X5 M2 Series 750 Watt 5-Channel Full-Range Class-D Element Ready Marine Amplifier A marine grade 750W 5-channel Full-Range Class-D amplifier delivering 100W x 4 plus 350W x 1 at 2-ohm (CTA-2006 rated). Features independent front, rear, and subwoofer channel crossover control, Continuously Variable Punch EQ, variable infrasonic filter, C.L.E.A.N. gain calibration, Rollback Protection, NOMAD speaker protection, RLC remote level control, Auto-Sense turn-on, RCA pass-free conformal coated circuit board, and 2/4/5 channel input selection. Backed by a 2 year warranty. Product Overview The Rockford Fosgate M2-750X5 is a 750W 5-channel Full-Range Class-D marine amplifier from the M2 Element Ready series, providing a complete single-amplifier solution for powering both marine speakers and a subwoofer from the one unit. Rated continuous power is 50W x 4 plus 200W x 1 at 4-ohm, or 100W x 4 plus 350W x 1 at 2-ohm (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 114W x 4 plus 426W x 1 at 2-ohm, and 234W x 2 bridged at 4-ohm on the full-range channels. The M2-750X5 provides fully independent crossover control for the front, rear, and subwoofer channels, each with their own high-pass and low-pass crossover adjustments at 12dB/octave Butterworth (50Hz-250Hz) plus a variable infrasonic filter on the subwoofer channel (15Hz-40Hz). A 2/4/5 channel input selection switch enables flexible integration with source units providing different numbers of RCA outputs. Three dedicated sets of RCA and high-level inputs cover front, rear, and subwoofer channels separately. C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) provides independent input and output clip indicators for each channel group. A Continuously Variable onboard Punch EQ delivers up to 18dB of bass boost at 45Hz for the subwoofer channel. The circuit board is conformal coated against dust and water, and the UV stable powder coated cast aluminium heatsink provides environmental protection. Zinc nickel-plated marine grade brass connection terminals resist corrosion. Auto-Sense turn-on removes the need for a dedicated remote wire, with a RAP bypass switch available. An RLC remote level control is included for in-cabin subwoofer volume adjustment. Rollback Protection and NOMAD speaker protection are active throughout. RATS tested and optimised using AudioGraph PowerCube. Features & Benefits Complete 5-Channel Marine System in One Amplifier: The M2-750X5 powers front speakers, rear speakers, and a subwoofer from a single unit, making it a space-efficient solution for full marine audio builds without the need for two separate amplifiers. Independent Crossover Control for Each Channel Group: Front, rear, and subwoofer channel groups each have independent high-pass and low-pass crossover controls at 12dB/octave Butterworth (50Hz-250Hz), plus the subwoofer channel adds a variable infrasonic filter (15Hz-40Hz). This level of independent control across all channels is not available on the M2-200X2 or M2-500X1 separately. 2/4/5 Channel Input Selection Switch: The input selection switch allows the M2-750X5 to integrate with source units providing 2, 4, or 5 channels of RCA output, reducing the need for Y-cables or signal splitting in installations where the source unit has fewer RCA outputs. Continuously Variable Punch EQ - Up to 18dB at 45Hz: The onboard Punch EQ provides up to 18dB of continuously adjustable bass boost at 45Hz on the subwoofer channel, allowing output to be tuned to the acoustic environment without a separate EQ or DSP. Variable Infrasonic Filter - 15Hz to 40Hz Tunable: The subwoofer channel infrasonic filter is tunable from 15Hz to 40Hz at 12dB/octave, providing precise low-frequency protection across different subwoofer drivers and enclosure types. C.L.E.A.N. Technology - Per-Channel Clip Monitoring: C.L.E.A.N. provides dedicated input and output clip indicators for the front, rear, and subwoofer channels independently, enabling accurate gain calibration across all five channels without carrying distortion over into adjacent channels. RLC Remote Level Control Included: The included RLC remote level control allows subwoofer output volume to be adjusted from the helm or seating position without accessing the amplifier. Rollback Protection, NOMAD, and Conformal Coated PCB: Rollback Protection dynamically manages output to prevent thermal stress on the output devices. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. The conformal coated circuit board protects against dust and water ingress at the PCB level. Technical Specs Specification Detail SKU M2-750X5 Number of Channels 5 (4 full-range + 1 subwoofer) Total Power 750W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 50W x 4 + 200W x 1 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 100W x 4 + 350W x 1 Rated Power - 4-ohm Bridged (CTA-2006) 200W x 2 (full-range channels) Dynamic Power - 4-ohm (PowerCube) 70W x 4 + 241W x 1 Dynamic Power - 2-ohm (PowerCube) 114W x 4 + 426W x 1 Dynamic Power - 4-ohm Bridged (PowerCube) 234W x 2 (full-range channels) Circuit Topology Full-Range Class-D Bridgeable Yes (full-range channels) Frequency Response 20 Hz - 20 kHz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input Front: 2 x RCA + 4-Pin Molex / Rear: 2 x RCA + 4-Pin Molex / Sub: 2 x RCA + 4-Pin Molex Input Selection 2/4/5 Channel Switch Tone Controls Punch EQ: 0 to +18dB at 45Hz (Continuously Variable, Sub channel) Front High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Front Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Sub Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Sub Infrasonic Filter 15 Hz - 40 Hz at 12dB/Octave Butterworth (Variable) Remote Controls Yes (RLC Remote Level Control included) Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Terminals Zinc Nickel-Plated Marine Grade Brass Cooling Convection Heatsink UV Stable Powder Coated Cast Aluminium (Focused Mass) Circuit Board Protection Conformal Coated Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 120A Max Current Draw at 13.8V Sinewave 71A Visual Indicators Power/Protect / C.L.E.A.N. In / C.L.E.A.N. Out (Front, Rear, Sub) Dimensions (H x W x D) 49 x 173 x 285mm (1.9 x 6.8 x 11.2 inch) Shipping Weight 2.78kg CTA-2006 Compliant Yes Quality Testing RATS (Rockford Automated Testing System) Warranty 2 Years Compatible With / Goes Well With The M2-750X5 suits marine watercraft and powersports applications requiring a single-unit 5-channel amplifier solution for speakers and a subwoofer. The 2/4/5 channel input switch makes it compatible with a wide range of source units. For higher output marine amplification, refer to the M5-1500X5. Goes Well With: PMX-1 - Rockford Fosgate Punch marine media receiver, a clean source unit pairing for the M2-750X5 in a full marine audio build M2-8H - M2 series 8 inch Color Optix marine horn speakers, powered by the four full-range channels of the M2-750X5 M2WL-8 / M2WL-8B - M2 series wake tower speakers for powering via the full-range channels of the M2-750X5 M210S4B / M212S4 - M2 series marine subwoofers driven by the dedicated 350W subwoofer channel of the M2-750X5 M5-1500X5 - Higher output M5 series 5-channel marine amplifier for builds requiring more power across all channels RFW4R / RFW4B - Rockford Fosgate 4 AWG marine amplifier wiring kits (red or black) matched to the M2-750X5's 4 AWG power wire requirement Frequently Asked Questions What is the difference between the M2-750X5 and the M5-1500X5? Both are 5-channel marine amplifiers, but they differ significantly in output and feature set. The M2-750X5 is from the M2 Element Ready series, rated at 100W x 4 plus 350W x 1 at 2-ohm, using Full-Range Class-D topology throughout all channels with conformal coating for environmental protection. The M5-1500X5 is from the premium M5 series, rated at 100W x 4 plus 600W x 1 at 2-ohm using Class-AD on full-range channels and Class-BD on the sub channel, with full IPX6 water intrusion rating, the PRESET feature for UTV kits, and greater than 75% efficiency. Choose the M2-750X5 for a complete, economical single-amplifier marine system; choose the M5-1500X5 for the highest protection rating and maximum subwoofer output. What does the 2/4/5 channel input selection switch do? The input selection switch configures the M2-750X5 to work with source units that provide 2, 4, or 5 channels of RCA output. On a 2-channel RCA setting, the front RCA inputs feed all five channels internally with the amp distributing signal appropriately. On 4-channel, front and rear pairs are used independently. On 5-channel, all three RCA input pairs (front, rear, sub) are used separately for full independent control. This removes the need for Y-cables in installations where the source unit has fewer RCA outputs. Can the M2-750X5 be used to power wake tower speakers? Yes. The four full-range channels can power wake tower speakers such as the M2WL-8 or M2WL-8B, with the dedicated subwoofer channel handling a marine subwoofer simultaneously. The 100W x 4 at 2-ohm rated output per channel is well matched to M2 series marine speakers in typical on-water listening conditions. What fuse does the M2-750X5 require and is it included? The M2-750X5 requires a 120A fuse, which is not included in the box and must be sourced separately. This is a larger fuse than the 80A used on the M2-500X1 and M2-200X2, reflecting the M2-750X5's higher current demand of up to 71A maximum at sinewave. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Does the M2-750X5 require a dedicated remote turn-on wire? Not necessarily. The Auto-Sense feature activates the amplifier automatically when it detects a high-level (speaker-level) input signal, removing the need for a dedicated remote wire when integrating with OEM or aftermarket source units without a remote output. A RAP bypass switch is also included for vessels with Retained Accessory Power systems to prevent the amplifier from staying on after the ignition is switched off.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less