Roadvision RBWK LED Light Bar Wiring Harness Kit 12V 24V Plug Play
A complete second generation plug and play wiring harness kit for one LED bar light, the Roadvision RBWK features smart electronics that automatically detect positive and negative switched headlamp systems, an H4/HB3 piggy back connector, waterproof Deutsch plugs, supplied 12V and 24V relays, and an illuminated rocker switch.
Product Overview
The Roadvision RBWK is a second generation bar light wiring kit fitted with smart electronics that automatically detect positive and negative headlamp systems. This removes the guesswork from modern vehicle installations, with the simple plug and play system compatible with halogen, HID, and LED headlight bulbs without the need for complex wiring modifications.
The kit provides everything needed to wire one LED bar light, connecting to the vehicle's high beam via the H4/HB3 piggy back connector so the bar switches with the headlights. Waterproof Deutsch plugs keep the connections protected in the engine bay and behind the bar, and the kit is supplied with both 12V and 24V relays to suit either vehicle system, plus an illuminated rocker switch for in-cabin control. Fitment is a simple DIY job following the supplied wiring diagram.
Features & Benefits
Smart Auto Polarity Detection: Second generation smart electronics automatically detect positive and negative switched headlamp systems, removing the wiring modifications older kits needed on modern vehicles.
Complete Kit for One LED Bar Light: The RBWK is a complete wiring harness kit suitable for one LED bar light, covering the relay, switching, connectors, and high beam integration in a single box.
Plug and Play H4/HB3 Piggy Back Connector: The piggy back connector taps into the vehicle's H4 or HB3 headlight plug so the bar activates with high beam, with no cutting or splicing of factory wiring.
Compatible with Halogen, HID and LED Headlights: The smart electronics work with halogen, HID, and LED headlight bulbs, suiting both factory and upgraded headlight setups.
12V and 24V Relays Supplied: Both 12V and 24V relays are included in the kit, covering cars, 4WDs, and trucks without buying a separate relay.
Waterproof Deutsch Plugs: Waterproof Deutsch plugs protect the connections against moisture and dust in the engine bay and behind the bar, matching the Deutsch fittings on Roadvision bar lights.
Illuminated Rocker Switch: The supplied illuminated rocker switch provides in-cabin control of the bar light with clear visual confirmation when armed.
Simple DIY Fitment: The plug and play design and supplied wiring diagram make installation a straightforward DIY job.
Technical Specs
Specification
Detail
SKU
RBWK
Brand
Roadvision
Description
Second Generation Bar Light Wiring Kit
Suits
One LED Bar Light
Vehicle Voltage
12V or 24V (Both Relays Supplied)
Headlamp System Compatibility
Positive and Negative Switched (Auto Detect)
Headlight Bulb Compatibility
Halogen, HID and LED
High Beam Connection
Plug and Play H4/HB3 Piggy Back Connector
Connectors
Waterproof Deutsch Plugs
Switch
Illuminated Rocker Switch
Cable Length
Not specified
Warranty
Not specified
Compatible With
The RBWK suits one LED bar light on 12V or 24V vehicles, with both relays supplied, and works on both positive and negatively switched headlamp systems with halogen, HID, or LED bulbs. The waterproof Deutsch plugs match the fittings used across Roadvision bar lights. For vehicles where the H4/HB3 plug is not accessible, Roadvision's RHBT Series high beam patch harnesses are the recommended accessory. Confirm your headlight connector type before purchase.
Frequently Asked Questions
What is included in the RBWK wiring kit?
The RBWK is a complete wiring harness kit for one LED bar light, including the harness with waterproof Deutsch plugs, an H4/HB3 piggy back connector, 12V and 24V relays, and an illuminated rocker switch.
Will the RBWK work on my vehicle's headlight system?
Yes, in most cases. The second generation smart electronics automatically detect positive and negative switched headlamp systems and are compatible with halogen, HID, and LED bulbs, without complex wiring modifications.
Is the RBWK compatible with 24V trucks?
Yes. The kit suits both 12V and 24V vehicles and is supplied with both a 12V and a 24V relay.
Can the RBWK wire up two light bars?
The RBWK is specified as a complete kit for one LED bar light. For additional bars, use an additional kit.
What if my vehicle does not have an accessible H4 or HB3 headlight plug?
Roadvision's RHBT Series high beam patch harnesses are the recommended accessory for vehicles where the H4/HB3 piggy back connector does not suit the factory headlight wiring.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
White LED Reverse Lamp Insert for Jumbo J3 Series Individually Mountable, ADR Approved, IP67.
Product Overview
The LED Autolamps J3WM is a white LED reverse lamp insert designed as an individual replacement module for the popular Jumbo J3 series rear lamp assembly. The Jumbo series is a common large-format lamp assembly used across many caravan, trailer, and truck applications, with the full assembly mounted horizontally using bolts through the rear and wire routed through the mounting surface. Rather than replacing the entire jumbo lamp assembly when one module fails, the J3WM allows the white reverse function module to be individually mounted with its own bracket and replaced separately a significant cost and time saving for fleet operators and trailer owners.
Featuring an inbuilt reflex reflector, the J3WM measures 190mm x 122mm x 30mm and is ADR approved (CTA042964). IP67 rated, 12–24V compatible, and backed by LED Autolamps' 5-year warranty.
Key Specifications
Function: White reverse lamp with inbuilt reflex reflector
LED colour: White
Dimensions: 190mm x 122mm x 30mm
Mount type: Individually mountable with bracket
Series: Jumbo J3 Series (replacement module)
IP rating: IP67
Input voltage: 12–24V DC (multivolt)
Compliance: ADR approved CTA042964
Warranty: 5 years
Weight: 0.5kg
Packaging: Blister pack single unit
Brand: LED Autolamps
SKU: J3WM
Features & Benefits
Individually replaceable module: If a single function module in your Jumbo series lamp assembly is accidentally damaged, only that module needs to be replaced not the entire lamp assembly significant savings for fleet operators and trailer owners
Inbuilt reflex reflector: Combines active white reverse LED output with passive reflector compliance in a single module
ADR approved CTA042964: Fully compliant with Australian Design Rules for reverse lamp use on Australian road vehicles and trailers
Individually mountable with bracket: Each module clips into its own bracket within the Jumbo assembly housing, allowing modular servicing
IP67 waterproof: Completely sealed against dust and temporary water immersion for reliable year-round outdoor performance
12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial trucks
5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty
Technical Specs
Specification
Detail
SKU
J3WM
Brand
LED Autolamps
Series
Jumbo J3 Series
Function
White Reverse Lamp + Inbuilt Reflex Reflector
LED Colour
White
Dimensions
190mm x 122mm x 30mm
Mount Type
Individually mountable with bracket
IP Rating
IP67
Input Voltage
12–24V DC (multivolt)
ADR Compliance
CTA042964
Warranty
5 Years
Weight
0.5kg
Packaging
Blister Pack single unit
Compatible With
Compatible with:
LED Autolamps Jumbo J3 Series rear lamp assemblies (full assembly: 595mm x 130mm x 45mm)
Suits trucks, trailers, and caravans using the J3 series jumbo lamp format
Frequently Asked Questions
What is a Jumbo series replacement module?
The Jumbo series lamp assembly is made up of individual function modules such as stop/tail/indicator, reverse, and amber indicator inserts each individually mountable with its own bracket. If one module is damaged, it can be replaced individually rather than replacing the entire jumbo lamp assembly.
Is this the complete jumbo lamp or just one module?
The J3WM is a single white reverse lamp module one component of the larger Jumbo J3 series lamp assembly. For a complete pre-assembled stop/tail/indicator/reverse jumbo lamp, refer to the LED Autolamps J3BARWM.
Is this lamp ADR approved for Australian road use?
Yes the J3WM is ADR approved under CTA042964, confirming it meets Australian legal requirements for reverse lamp use.
Does this lamp include a reflex reflector?
Yes an integrated reflex reflector is built into the module, providing both active white LED output and passive reflective compliance.
What is the return policy for this product?
Return eligibility is subject to the retailer's policy. Confirm your existing lamp assembly uses the J3 series format before purchasing this replacement module. Contact the seller if you're unsure prior to purchase.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Stinger SPXDMF 3-Pin Solder-On Y Harness Connector Pack for Stinger ENLIGHT10 SPXD5 and SPXDUBKIT 8 Connectors with 16 Heat Shrink Pieces
The Stinger SPXDMF is an 8-pack of 3-pin solder-on Y harness connectors for expanding or extending harness runs on compatible Stinger ENLIGHT10 products. Contains 4 female and 4 male solder-on connectors and 16 pieces of heat shrink. For use with Stinger ENLIGHT10 SPXD5 LED strips and SPXDUBKIT only. Soldering is required.
Product overview
The SPXDMF provides the connectors and heat shrink needed to add additional harness sections to an SPXD5 or SPXDUBKIT installation without sourcing individual wiring components separately. The matched male and female connector pairs allow Y-harness splits and extensions to be built where the standard harness length or configuration does not reach. Heat shrink is included for insulation over the solder joints.
Soldering is required for installation. This is a wiring accessory for those customising or extending their ENLIGHT10 lighting layout, not a plug-in solution. Compatible with SPXD5 and SPXDUBKIT only.
Features and benefits
Harness expansion for SPXD5 and SPXDUBKIT: Solder-on connectors and heat shrink for adding harness sections to ENLIGHT10 SPXD5 and SPXDUBKIT installations.
Matched male and female pairs: 4 male and 4 female connectors for Y-harness splits and extensions.
Heat shrink included: 16 pieces supplied for insulation over solder joints without a separate hardware purchase.
Flexible lighting layout: Allows additional harness branches to be added where the standard harness does not reach.
Soldering required: Not a plug-in accessory. For those customising or extending their ENLIGHT10 harness layout.
What's in the box
4x Female 3-Pin Solder-On Connectors
4x Male 3-Pin Solder-On Connectors
16x Heat Shrink Pieces
Technical specs
Specification
Detail
SKU
SPXDMF
Brand
Stinger
Function
3-pin Y harness connectors for ENLIGHT10
Connector Type
Solder-on, 3-pin
Female Connectors
4x
Male Connectors
4x
Heat Shrink Pieces
16x
Total Pack Contents
8 connectors and 16 heat shrink pieces
Compatible Products
Stinger ENLIGHT10 SPXD5, SPXDUBKIT
Application
Harness addition and customisation
Compatible with
The SPXDMF suits Stinger ENLIGHT10 SPXD5 LED strips and the Stinger ENLIGHT10 SPXDUBKIT.
Frequently asked questions
What is the SPXDMF used for? The SPXDMF provides 3-pin solder-on Y harness connectors and heat shrink for adding harness sections to Stinger ENLIGHT10 SPXD5 and SPXDUBKIT installations, enabling a more customised or extended lighting layout.
What is included in the pack? The pack contains 4 female solder-on connectors, 4 male solder-on connectors, and 16 heat shrink pieces 8 connectors in total with heat shrink for insulation.
Do I need to solder to use the SPXDMF? Yes. The SPXDMF uses solder-on connectors. Soldering is required to attach the connectors to the harness. The included heat shrink provides insulation over the solder joints.
Which ENLIGHT10 products is the SPXDMF compatible with? The SPXDMF is confirmed for Stinger ENLIGHT10 SPXD5 LED strips and the SPXDUBKIT only.
Is the SPXDMF plug-and-play? No. The SPXDMF requires soldering and is intended for those customising or extending their ENLIGHT10 harness layout, not as a plug-in solution.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Stinger SE-SXMHAR Connection Harness for Stinger ENLIGHT10 SPXD Lighting to HEIGH10 Infotainment with Colour LINK AUTO and On/Off Control
The Stinger SE-SXMHAR is a connection harness that links compatible Stinger ENLIGHT10 SPXD lighting products to the Stinger HEIGH10 infotainment system, enabling full lighting control from the HEIGH10's touchscreen interface. Compatible ENLIGHT10 products: SPXDBTC, SPXDK8, SPXDK4, and SPXDUBKIT. The HEIGH10 must be running the latest firmware version for ENLIGHT10 integration to work. Harness only; HEIGH10 and ENLIGHT10 products sold separately.
Product overview
The SE-SXMHAR enables direct ENLIGHT10 lighting control from the HEIGH10 interface without reaching for a separate remote or smartphone. Once connected and the HEIGH10 firmware is up to date, the head unit can change colours, switch lights on and off, use the LINK function to synchronise the SPXD lighting colour with the HEIGH10's own illumination colour, and activate the AUTO function to turn lights on and off automatically with the vehicle's headlights.
The enLIGHT10 by Stinger smartphone app remains available as an additional control method alongside the HEIGH10 interface.
Update the HEIGH10 firmware before connecting the SE-SXMHAR. ENLIGHT10 integration will not function without the latest firmware version.
Features and benefits
HEIGH10 lighting integration: Connects ENLIGHT10 SPXD lighting to the HEIGH10 touchscreen interface for direct colour, on/off, LINK, and AUTO control from the head unit.
LINK mode colour matching: Synchronises SPXD lighting colour to match the HEIGH10's own illumination colour for a coordinated look.
AUTO headlight trigger: SPXD lights activate and deactivate automatically with the vehicle's headlights when set to AUTO.
Dual control via HEIGH10 or app: Lighting can be controlled from the HEIGH10 interface or the enLIGHT10 by Stinger smartphone app.
Replacement harness: Direct replacement for a missing or damaged connection harness between the HEIGH10 and ENLIGHT10 products.
Latest HEIGH10 firmware required: Update the HEIGH10 before installation. ENLIGHT10 integration will not function without the latest firmware.
Harness only: HEIGH10 and ENLIGHT10 products sold separately.
Technical specs
Specification
Detail
SKU
SE-SXMHAR
Brand
Stinger
Function
ENLIGHT10 to HEIGH10 connection harness
Compatible Head Unit
Stinger HEIGH10 (latest firmware required)
Compatible ENLIGHT10 Products
SPXDBTC, SPXDK8, SPXDK4, SPXDUBKIT
HEIGH10 Firmware
Latest version required before installation
Control Modes
Colour change, on/off, LINK, AUTO
App Control
Yes, enLIGHT10 by Stinger app
Includes
Harness only
Compatible with
The SE-SXMHAR suits the Stinger HEIGH10 infotainment system (latest firmware) with the following ENLIGHT10 products: SPXDBTC, SPXDK8, SPXDK4, and SPXDUBKIT.
Frequently asked questions
What does the SE-SXMHAR do? The SE-SXMHAR connects compatible Stinger ENLIGHT10 SPXD lighting products to the Stinger HEIGH10 infotainment system, enabling colour, on/off, LINK mode, and AUTO headlight trigger control directly from the HEIGH10 touchscreen interface.
Does the HEIGH10 need to be updated before using this harness? Yes. The HEIGH10 must be running the latest firmware version for ENLIGHT10 integration to function. Update the HEIGH10 firmware before connecting the SE-SXMHAR.
Which ENLIGHT10 products work with the SE-SXMHAR? The SE-SXMHAR is confirmed for Stinger ENLIGHT10 products SPXDBTC, SPXDK8, SPXDK4, and SPXDUBKIT.
Can I still use the smartphone app after installing the SE-SXMHAR? Yes. The enLIGHT10 by Stinger app remains available as an alternative control method alongside the HEIGH10 interface.
What is included in the box? The SE-SXMHAR includes the connection harness only. The Stinger HEIGH10 and ENLIGHT10 products are sold separately.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Stinger SPXCLA Cigarette Lighter Adaptor Harness with On/Off Switch for Stinger ENLIGHT10 SPXDK8 SPXDK4 SPXDUBKIT and SPXDBTC
The Stinger SPXCLA is a cigarette lighter adaptor harness designed specifically for Stinger ENLIGHT10 products. Provides a 12V cigarette lighter socket connection to the ENLIGHT10 accessory via bullet terminals, with an integrated on/off switch for convenient power control. Compatible with ENLIGHT10 models SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC only. Not a universal cigarette lighter adaptor.
Product overview
The SPXCLA allows compatible ENLIGHT10 products to be powered from a standard 12V cigarette lighter socket without hardwiring into the vehicle's electrical system. The integrated on/off switch provides power control without needing to unplug the adaptor or access the unit itself, suited to temporary and semi-permanent ENLIGHT10 setups. The bullet terminal output is matched to the input connection on compatible ENLIGHT10 products.
Compatibility is confirmed for the ENLIGHT10 SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC only. Use with other Stinger or third-party products is not confirmed.
Features and benefits
Cigarette lighter power connection: Powers compatible ENLIGHT10 products from a standard 12V cigarette lighter socket without hardwiring.
Integrated on/off switch: Switches the connected ENLIGHT10 product on or off without unplugging from the socket or accessing the unit.
Bullet terminal output: Terminates in bullet connectors matched to the input on compatible ENLIGHT10 products for a secure connection.
ENLIGHT10 products only: Designed for the SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC. Not a universal cigarette lighter adaptor.
Technical specs
Specification
Detail
SKU
SPXCLA
Brand
Stinger
Function
Cigarette lighter adaptor to bullet terminals
On/Off Switch
Yes, integrated
Compatible Products
SPXDK8, SPXDK4, SPXDUBKIT, SPXDBTC
Application
Stinger ENLIGHT10 products only
Includes
Cigarette lighter adaptor harness with bullet terminals and on/off switch
Compatible with
The SPXCLA suits the following Stinger ENLIGHT10 products: SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC.
Frequently asked questions
What Stinger products is the SPXCLA compatible with? The SPXCLA is confirmed for Stinger ENLIGHT10 products SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC only. It is not confirmed for use with other Stinger or third-party products.
Does the SPXCLA include an on/off switch? Yes. An on/off switch is integrated into the harness, allowing the connected ENLIGHT10 product to be switched on or off without unplugging the adaptor from the cigarette lighter socket.
What connector type does the SPXCLA use at the output end? The SPXCLA terminates in bullet terminals, matched to the input connection on compatible ENLIGHT10 products.
Can the SPXCLA be used as a general-purpose cigarette lighter adaptor? No. The SPXCLA is designed specifically for Stinger ENLIGHT10 products and should not be assumed compatible with other devices or accessories.
What is included in the box? The SPXCLA includes the cigarette lighter adaptor to bullet terminals harness with integrated on/off switch. No additional accessories are included.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
OEX ACX5732 12/24V Amber LED Low Profile Minibar with Fixed Bracket Mount
The OEX ACX5732 is a 12/24V amber LED low profile minibar with a fixed 4-bolt bracket mount. Measuring 251mm in length with a 41mm low profile height, it carries an IP67 rating, SAE Class 1 certification and EMC R10 compliance. Twenty flash patterns are selectable, and the unit operates across a wide voltage range of 10 to 30V DC. Backed by a 12-month warranty.
Product overview
The ACX5732 is part of the OEX Multivolt minibar range, designed for professional warning light applications in both 12V and 24V vehicle environments. The low profile 41mm body with amber lens and black top keeps the installation unobtrusive while delivering SAE Class 1 certified output. The 4-bolt bracket mounting system provides a secure, permanent fixed installation suited to commercial vehicles, service vehicles and emergency support applications.
With 20 selectable flash patterns and a wide 10-30V operating range, the ACX5732 is adaptable across a variety of vehicles and operational requirements without additional wiring modifications. The IP67 rating confirms dust-tight and water submersion protection to 1 metre depth, making it suitable for outdoor and harsh-environment mounting positions.
Features and benefits
Multivolt 12/24V operation: Operates across a wide voltage range of 10 to 30V DC, making the ACX5732 compatible with both 12V passenger and light commercial vehicles and 24V heavy vehicle platforms without modification.
Low profile 41mm body: The 41mm height keeps the minibar unobtrusive on the roofline or mounting surface while maintaining a professional, purpose-built appearance.
Amber lens with black top: Amber lens for high-visibility warning output with a black top housing that suits most vehicle colour schemes.
20 selectable flash patterns: Twenty flash patterns provide flexibility for different operational requirements and jurisdictional preferences.
4-bolt bracket mount: Secure fixed bracket installation with 4-bolt fixing for permanent mounting on commercial and service vehicles.
IP67 rated: Dust-tight and protected against water submersion to 1 metre depth, suitable for exposed mounting positions.
SAE Class 1 certified: Meets SAE Class 1 warning light performance standards, confirming output suitable for professional warning light applications.
EMC R10 compliant: Electromagnetic compatibility compliance per R10, reducing interference with vehicle electronics.
12-month warranty: Covered by a 12-month OEX warranty.
Technical specs
Specification
Detail
SKU
ACX5732
Brand
OEX
Voltage
12/24V DC (10–30V operating range)
Colour
Amber
Lens Colour
Amber
Top Colour
Black
Light Type
LED
Style
Low profile
Height
41mm
Length
251mm
Width
170mm
Flash Patterns
20
Mounting
4-bolt bracket (fixed)
IP Rating
IP67
Certification
SAE Class 1, EMC R10
Warranty
12 months
Sold As
Each
Frequently asked questions
Is the ACX5732 suitable for both 12V and 24V vehicles? Yes. The ACX5732 operates across a wide voltage range of 10 to 30V DC, making it compatible with 12V and 24V vehicle platforms without requiring any wiring modification.
What flash patterns are available on the ACX5732? The ACX5732 offers 20 selectable flash patterns. The specific pattern names and selection method are not detailed in the current product data — contact us for further information on pattern options before purchasing.
Is the ACX5732 SAE Class 1 certified? Yes. The ACX5732 carries SAE Class 1 certification, confirming it meets the performance standard for professional warning light output in its category.
What does the IP67 rating mean for this minibar? IP67 means the ACX5732 is dust-tight and protected against water submersion to a depth of 1 metre for up to 30 minutes. This makes it suitable for exposed rooftop and exterior mounting positions in outdoor environments.
Does the ACX5732 come with a magnetic mount option? The title and primary specification for this listing describe the fixed 4-bolt bracket mount variant. Contact us to confirm whether a magnetic mount version of this minibar is available separately.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
OEX ACX5734 12/24V Amber LED Low Profile Minibar with Clear Lens and Fixed Bracket Mount
The OEX ACX5734 is a 12/24V amber LED low profile minibar with a clear lens and fixed 4-bolt bracket mount. Measuring 251mm in length with a 41mm low profile height, it carries an IP67 rating, SAE Class 1 certification and EMC R10 compliance. Twenty flash patterns are selectable, and the unit operates across a wide voltage range of 10 to 30V DC. Backed by a 12-month warranty.
Product overview
The ACX5734 shares the same core specification as the ACX5732 but is fitted with a clear lens rather than an amber lens, while retaining amber LED output. The clear lens finish gives the minibar a more discreet appearance when not in use, blending into the vehicle profile rather than drawing attention with a coloured lens. This makes the ACX5734 a practical choice where a low-visibility resting profile is preferred alongside full amber warning output when activated.
Like the ACX5732, the ACX5734 is part of the OEX Multivolt minibar range with 20 selectable flash patterns, IP67 protection, SAE Class 1 certification and EMC R10 compliance. The 4-bolt bracket mount provides a secure, permanent fixed installation suited to commercial vehicles, service vehicles and emergency support applications across 12V and 24V platforms.
Features and benefits
Clear lens with amber LED output: The clear lens provides a low-visibility resting profile while the amber LEDs deliver full SAE Class 1 warning output when activated. Distinct from the amber-lens ACX5732.
Multivolt 12/24V operation: Operates across a wide voltage range of 10 to 30V DC, compatible with both 12V and 24V vehicle platforms without modification.
Low profile 41mm body with black top: The 41mm height and black top housing keep the minibar unobtrusive on the mounting surface.
20 selectable flash patterns: Twenty flash patterns provide flexibility for different operational requirements and jurisdictional preferences.
4-bolt bracket mount: Secure fixed bracket installation with 4-bolt fixing for permanent mounting on commercial and service vehicles.
IP67 rated: Dust-tight and protected against water submersion to 1 metre depth, suitable for exposed mounting positions.
SAE Class 1 certified: Meets SAE Class 1 warning light performance standards for professional warning light applications.
EMC R10 compliant: Electromagnetic compatibility compliance per R10.
12-month warranty: Covered by a 12-month OEX warranty.
Technical specs
Specification
Detail
SKU
ACX5734
Brand
OEX
Voltage
12/24V DC (10–30V operating range)
LED Colour
Amber
Lens Colour
Clear
Top Colour
Black
Light Type
LED
Style
Low profile
Height
41mm
Length
251mm
Width
170mm
Flash Patterns
20
Mounting
4-bolt bracket (fixed)
IP Rating
IP67
Certification
SAE Class 1, EMC R10
Warranty
12 months
Sold As
Each
Frequently asked questions
What is the difference between the ACX5734 and the ACX5732? Both are 12/24V amber LED low profile minibars with the same dimensions, flash patterns and certifications. The ACX5732 has an amber lens, while the ACX5734 has a clear lens. Choose the ACX5734 if a lower-visibility resting profile is preferred.
Is the ACX5734 suitable for both 12V and 24V vehicles? Yes. The ACX5734 operates across a voltage range of 10 to 30V DC, making it compatible with 12V and 24V vehicle platforms without wiring modification.
What flash patterns are available on the ACX5734? The ACX5734 offers 20 selectable flash patterns. Contact us for further information on specific pattern options before purchasing.
What does the IP67 rating mean for this minibar? IP67 means the ACX5734 is dust-tight and protected against water submersion to a depth of 1 metre for up to 30 minutes, suitable for exposed exterior mounting positions.
Does the ACX5734 come with a magnetic mount option? The title and primary specification for this listing describe the fixed 4-bolt bracket mount variant. Contact us to confirm whether a magnetic mount version of this minibar is available separately.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
OEX ACX2322A 10-80 Volt LED Beacon Amber Materials Handling Strobe/Revolving
Maximise worksite safety with the OEX ACX2322A 10-80V amber LED warning beacon featuring revolving, single flash, and triple flash pattern options for versatile warning signalling, a high-voltage 10-80V input range for compatibility across a uniquely broad spectrum of vehicles and equipment, IP67 waterproof protection for reliable outdoor and industrial performance in all weather conditions, ECE R10 electromagnetic compatibility approval, a rugged polycarbonate base and amber polycarbonate lens for durable all-environment operation, fixed screw mount for secure permanent installation, an operating temperature range of -30°C to +60°C for extreme-condition reliability, and a 12-month OEX warranty.
Product Overview
The OEX ACX2322A is a professional-grade fixed-mount amber LED warning beacon purpose-built for materials handling, industrial, mining, and heavy equipment applications where a reliable, high-visibility warning presence is required across a wide range of vehicle and equipment voltage systems. The defining specification of the ACX2322A is its exceptional 10-80V operating voltage range a capability that goes far beyond the 12V and 24V coverage of standard automotive warning lights, extending compatibility to 36V and 48V electric forklifts and materials handling equipment, 48V industrial vehicles, 72V heavy machinery, and specialised high-voltage mobile plant where standard 12/24V beacons simply cannot be used. This makes the ACX2322A the beacon of choice for warehousing, distribution centres, manufacturing facilities, ports, and mining operations where the vehicle fleet includes electric forklifts, reach stackers, order pickers, and other materials handling equipment operating on elevated DC voltage systems. Three selectable flash patterns revolving, single flash, and triple flash allow the operator to configure the warning output for the specific application and site safety requirements, with the revolving pattern providing a traditional high-visibility sweep effect and the single and triple flash patterns offering more contemporary strobe-style signalling for varied regulatory environments. The compact 130 x 130 x 95mm polycarbonate body and fixed screw mount provide a secure, vibration-resistant installation on cab roofs, overhead guards, masts, and equipment frames across industrial and mobile plant applications. IP67 waterproof protection ensures reliable operation in wash-down environments, outdoor conditions, and the dust and spray exposure common in port, mining, and manufacturing settings. The -30°C to +60°C operating temperature range covers the full spectrum of Australian working conditions from cold-climate alpine and refrigerated warehouse environments through to the extreme heat of open-cut mining and construction sites in tropical and arid regions.
Features & Benefits
10-80V High Voltage Input Range Covers an exceptionally broad voltage spectrum compatible with 12V and 24V standard vehicles, 36V and 48V electric forklifts and materials handling equipment, 48V industrial vehicles, and up to 80V heavy machinery a capability no standard automotive 12/24V beacon can match.
Revolving, Single and Triple Flash Patterns Three distinct warning signal options allow configuration for the specific application and site safety requirements, from the traditional revolving sweep effect to contemporary strobe-style single and triple flash patterns suited to varied regulatory and operational environments.
IP67 Waterproof Protection Certified for continuous submersion up to 1 metre depth, ensuring reliable operation in wash-down environments, heavy rain, outdoor exposure, and the dust and spray conditions common in port, mining, warehouse, and manufacturing applications.
ECE R10 Approved Electromagnetic compatibility certification confirms the ACX2322A meets UN ECE Regulation 10 requirements, ensuring the beacon does not generate interference that could affect vehicle electronics, industrial control systems, or communications equipment on the host vehicle or equipment.
Polycarbonate Base and Amber Lens Impact-resistant polycarbonate construction for both the base and amber lens provides excellent durability against knocks, vibration, and UV exposure in demanding industrial and outdoor environments.
Fixed Screw Mount Secure permanent screw mount installation on cab roofs, overhead guards, masts, and equipment frames, providing a vibration-resistant, tamper-resistant connection suitable for high-vibration industrial and off-road equipment.
-30°C to +60°C Operating Temperature Range Reliable performance across extreme cold and heat from refrigerated warehouse and cold-climate environments through to open-cut mining and construction sites in tropical and arid Australian regions.
Compact 130 x 130 x 95mm Form Factor The low-profile compact dimensions fit neatly on overhead guards, cab roofs, and equipment frames without obstructing operator visibility or adding excessive height to clearance-sensitive materials handling equipment.
Technical Specs
Specification
Detail
Brand
OEX
SKU
ACX2322A
Beacon Colour
Amber
Lens Colour
Amber
Lens Material
Polycarbonate
Base Material
Polycarbonate
LEDs
5
Voltage Input
10-80V DC
Flash Patterns
Revolving, Single Flash, Triple Flash
Mount Type
Fixed Screw Mount
IP Rating
IP67
Compliance
ECE R10
Dimensions (LxWxH)
130mm x 130mm x 95mm
Operating Temperature
-30°C to +60°C
Weight
0.512kg
Warranty
1 Year
Compatible With / Goes Well With
The OEX ACX2322A is compatible with DC electrical systems from 10V to 80V, covering 12V and 24V standard vehicles, 36V and 48V electric forklifts and materials handling equipment, 48V industrial vehicles, and up to 80V heavy machinery and mobile plant. Well suited to electric forklifts, reach stackers, order pickers, pallet jacks, tuggers, airport ground support equipment, mining haul trucks and auxiliary equipment, port and logistics machinery, and any industrial or mobile plant equipment operating outside standard 12/24V automotive voltage ranges. Pairs well with OEX and compatible beacon wiring accessories, OEX switch panels and rocker switches for operator control, OEX circuit breakers and inline fuse holders for circuit protection, and OEX cable management accessories for clean permanent wiring installations.
Frequently Asked Questions
Why does the ACX2322A support 10-80V and which vehicles and equipment does this cover?
The 10-80V input range is specifically designed for materials handling and industrial equipment that operates on elevated DC voltage systems well above the 12V and 24V of standard automotive vehicles. Common applications include 36V and 48V electric forklifts the most widely used voltage systems in Australian warehousing and logistics 48V electric order pickers and reach stackers, 72V and 80V heavy industrial tuggers and tow tractors, airport ground support equipment, and various mining auxiliary vehicles. A standard 12/24V automotive beacon cannot be safely connected to these higher-voltage systems, making the ACX2322A a necessary specialist product for industrial fleet safety compliance rather than a like-for-like upgrade from a standard vehicle beacon.
What is the difference between the revolving, single flash, and triple flash patterns on the ACX2322A?
The revolving pattern simulates the traditional rotating beacon effect the LEDs sequence in a way that creates the appearance of a sweeping rotating light, which is widely recognised as a warning signal in industrial and traffic environments. Single flash produces one sharp burst of light per cycle, while triple flash produces three rapid bursts per cycle before pausing both are contemporary strobe-style patterns that can be more attention-grabbing in high-ambient-light industrial environments. Pattern selection is typically made via a switch or selector on the unit — refer to the included instructions for the specific procedure on the ACX2322A.
What does ECE R10 approval mean for the ACX2322A?
ECE R10 refers to UN ECE Regulation 10, the electromagnetic compatibility standard for vehicles and their components. R10 approval confirms the ACX2322A does not emit electromagnetic interference exceeding regulated limits that could affect vehicle electronics, industrial control systems, radio communications, or other sensitive equipment on or near the host vehicle. In industrial environments where proximity to automated systems, wireless networks, and precision instrumentation is common, ECE R10 approval is an important assurance that the beacon will not disrupt critical operational or safety systems.
Is the ACX2322A suitable for outdoor and wash-down environments?
Yes. The IP67 waterproof rating certifies the ACX2322A for continuous submersion up to 1 metre depth, making it equally suited to outdoor exposure, heavy rain, road splash, and the regular wash-down cleaning cycles common in food distribution, logistics, port, and agricultural equipment environments. The polycarbonate base and lens also provide strong resistance to the chemical cleaning agents commonly used in industrial wash-down applications, and the -30°C to +60°C operating range covers refrigerated warehouse environments through to outdoor Australian summer conditions.
Are there safety regulations in Australia requiring warning beacons on forklifts and materials handling equipment?
Yes. Safe Work Australia guidance and various state workplace health and safety regulations reference the use of warning devices on powered industrial trucks and materials handling equipment operating in shared pedestrian and vehicle environments. Requirements vary by jurisdiction and workplace, and specific beacon performance standards may be referenced in site safety plans, industry codes of practice, or equipment manufacturer specifications. The ACX2322A's ECE R10 compliance and IP67 rating make it a technically suitable choice for workplace safety applications always consult the relevant WHS regulations and your workplace safety plan to confirm compliance requirements for your specific site and equipment type.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
LED Autolamps PATCH-HINO - Tray Conversion Kit for Hino
Professional tray conversion kit specifically designed for Hino vehicles containing 600mm plug-and-play patch lead cables with Deutsch connectors for converting tray lights to LED without error codes or fast flashing issues.
Product Overview
The LED Autolamps PATCH-HINO is a complete tray conversion kit designed for Hino vehicles converting traditional lights to LED without error codes or fast flashing. This kit contains 600mm patch lead cables featuring plug-in Deutsch connector connections requiring no splicing or cutting for simple installation. The conversion kit eliminates compatibility issues when upgrading to LED lights on Hino tray backs, ensuring proper functionality without triggering vehicle warning systems or causing hyperflashing indicators. Each cable is manufactured to LED Autolamps' premium quality standards with ISO9001 certification ensuring product consistency and reliability for professional tray back conversions.
Important Notes: Specifically for Hino vehicles. 600mm cable length with Deutsch plugs. No splicing or wiring required. One year warranty.
Key Features
Hino-Specific Design - Purpose-built conversion kit specifically engineered for Hino tray back vehicles ensuring guaranteed compatibility with factory wiring systems
Error-Free LED Conversion - Eliminates error codes and fast flashing issues when converting traditional lights to LED, ensuring proper functionality without triggering vehicle warning systems
Complete Tray Fit Out - Contains 600mm patch lead cables providing complete tray back lighting conversion solution with all necessary components for professional installation
Plug-and-Play Installation - Features Deutsch plug connectors enabling simple plug-in connection requiring no splicing, cutting, wiring, or permanent modifications
600mm Cable Length - Optimal cable length provides adequate reach for tray back installations while maintaining clean professional appearance without excessive cable slack
ISO9001 Quality Standards - Manufactured to LED Autolamps' ISO9001 certified standards ensuring product consistency, durability, and reliable performance in demanding conditions
Technical Specifications
Specification
Details
Brand
LED Autolamps
Model
Tray Conversion Kit
SKU
PATCH-HINO
Vehicle Compatibility
Hino
Application
Tray Back LED Conversion
Type
Mounts Lenses & Harnesses
Cable Length
600mm
Connector Type
Deutsch Plugs
Installation Type
Plug and Play (No Splicing or Wiring Required)
Function
Prevents Error Codes and Fast Flashing
Warranty
One Year
Manufactured
China
Packaging
Polybag
Frequently Asked Questions
Q: Which vehicles is this conversion kit compatible with?
A: This conversion kit is specifically designed for Hino vehicles with tray back configurations. The kit is engineered for Hino factory wiring systems.
Q: Why do I need this kit when converting to LED lights?
A: When converting traditional lights to LED on vehicles, error codes or fast flashing can occur due to lower current draw. This kit prevents these issues by ensuring proper communication between LED lights and the vehicle's electrical system.
Q: Does this kit require any splicing or cutting of wires?
A: No, the kit features plug-and-play installation with Deutsch connectors. Simply plug the cables into the existing wiring system without any splicing, cutting, wiring, or permanent modifications required.
Q: What is the cable length provided?
A: The PATCH-HINO kit provides 600mm cable length, offering optimal reach for tray back installations while maintaining clean professional appearance without excessive cable slack.
Q: What warranty is included with this conversion kit?
A: This LED Autolamps conversion kit is backed by a one year warranty, ensuring product quality and reliability for professional tray back lighting conversions.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
LED Autolamps PATCH-ISUZU - Tray Conversion Kit for Isuzu Truck
Professional tray conversion kit specifically designed for Isuzu Truck vehicles containing 600mm plug-and-play patch lead cables with Deutsch connectors for converting tray lights to LED without error codes or fast flashing issues.
Product Overview
The LED Autolamps PATCH-ISUZU is a complete tray conversion kit designed for Isuzu Truck vehicles converting traditional lights to LED without error codes or fast flashing. This kit contains 600mm patch lead cables featuring plug-in Deutsch connector connections requiring no splicing or cutting for simple installation. The conversion kit eliminates compatibility issues when upgrading to LED lights on Isuzu Truck tray backs, ensuring proper functionality without triggering vehicle warning systems or causing hyperflashing indicators. Each cable is manufactured to LED Autolamps' premium quality standards with ISO9001 certification ensuring product consistency and reliability for professional tray back conversions.
Important Notes: Specifically for Isuzu Truck vehicles. 600mm cable length with Deutsch plugs. No splicing or wiring required. One year warranty.
Key Features
Isuzu Truck Specific Design - Purpose-built conversion kit specifically engineered for Isuzu Truck tray back vehicles ensuring guaranteed compatibility with factory wiring systems
Error-Free LED Conversion - Eliminates error codes and fast flashing issues when converting traditional lights to LED, ensuring proper functionality without triggering vehicle warning systems
Complete Tray Fit Out - Contains 600mm patch lead cables providing complete tray back lighting conversion solution with all necessary components for professional installation
Plug-and-Play Installation - Features Deutsch plug connectors enabling simple plug-in connection requiring no splicing, cutting, wiring, or permanent modifications
600mm Cable Length - Optimal cable length provides adequate reach for tray back installations while maintaining clean professional appearance without excessive cable slack
ISO9001 Quality Standards - Manufactured to LED Autolamps' ISO9001 certified standards ensuring product consistency, durability, and reliable performance in demanding conditions
Technical Specifications
Specification
Details
Brand
LED Autolamps
Model
Tray Conversion Kit
SKU
PATCH-ISUZU
Vehicle Compatibility
Isuzu Truck
Application
Tray Back LED Conversion
Type
Mounts Lenses & Harnesses
Cable Length
600mm
Connector Type
Deutsch Plugs
Installation Type
Plug and Play (No Splicing or Wiring Required)
Function
Prevents Error Codes and Fast Flashing
Warranty
One Year
Manufactured
China
Packaging
Polybag
Frequently Asked Questions
Q: Which vehicles is this conversion kit compatible with?
A: This conversion kit is specifically designed for Isuzu Truck vehicles with tray back configurations. The kit is engineered for Isuzu Truck factory wiring systems.
Q: Why do I need this kit when converting to LED lights?
A: When converting traditional lights to LED on vehicles, error codes or fast flashing can occur due to lower current draw. This kit prevents these issues by ensuring proper communication between LED lights and the vehicle's electrical system.
Q: Does this kit require any splicing or cutting of wires?
A: No, the kit features plug-and-play installation with Deutsch connectors. Simply plug the cables into the existing wiring system without any splicing, cutting, wiring, or permanent modifications required.
Q: What is the cable length provided?
A: The PATCH-ISUZU kit provides 600mm cable length, offering optimal reach for tray back installations while maintaining clean professional appearance without excessive cable slack.
Q: What warranty is included with this conversion kit?
A: This LED Autolamps conversion kit is backed by a one year warranty, ensuring product quality and reliability for professional tray back lighting conversions.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
LED Autolamps PATCH-LDV - Tray Conversion Kit for LDV
Professional tray conversion kit specifically designed for LDV vehicles containing 600mm plug-and-play patch lead cables with Deutsch connectors for converting tray lights to LED without error codes or fast flashing issues.
Product Overview
The LED Autolamps PATCH-LDV is a complete tray conversion kit designed for LDV vehicles converting traditional lights to LED without error codes or fast flashing. This kit contains 600mm patch lead cables featuring plug-in Deutsch connector connections requiring no splicing or cutting for simple installation. The conversion kit eliminates compatibility issues when upgrading to LED lights on LDV tray backs, ensuring proper functionality without triggering vehicle warning systems or causing hyperflashing indicators. Each cable is manufactured to LED Autolamps' premium quality standards with ISO9001 certification ensuring product consistency and reliability for professional tray back conversions.
Important Notes: Specifically for LDV vehicles. 600mm cable length with Deutsch plugs. No splicing or wiring required. One year warranty.
Key Features
LDV-Specific Design - Purpose-built conversion kit specifically engineered for LDV tray back vehicles ensuring guaranteed compatibility with factory wiring systems
Error-Free LED Conversion - Eliminates error codes and fast flashing issues when converting traditional lights to LED, ensuring proper functionality without triggering vehicle warning systems
Complete Tray Fit Out - Contains 600mm patch lead cables providing complete tray back lighting conversion solution with all necessary components for professional installation
Plug-and-Play Installation - Features Deutsch plug connectors enabling simple plug-in connection requiring no splicing, cutting, wiring, or permanent modifications
600mm Cable Length - Optimal cable length provides adequate reach for tray back installations while maintaining clean professional appearance without excessive cable slack
ISO9001 Quality Standards - Manufactured to LED Autolamps' ISO9001 certified standards ensuring product consistency, durability, and reliable performance in demanding conditions
Technical Specifications
Specification
Details
Brand
LED Autolamps
Model
Tray Conversion Kit
SKU
PATCH-LDV
Vehicle Compatibility
LDV
Application
Tray Back LED Conversion
Type
Mounts Lenses & Harnesses
Cable Length
600mm
Connector Type
Deutsch Plugs
Installation Type
Plug and Play (No Splicing or Wiring Required)
Function
Prevents Error Codes and Fast Flashing
Warranty
One Year
Manufactured
China
Packaging
Polybag
Frequently Asked Questions
Q: Which vehicles is this conversion kit compatible with?
A: This conversion kit is specifically designed for LDV vehicles with tray back configurations. The kit is engineered for LDV factory wiring systems.
Q: Why do I need this kit when converting to LED lights?
A: When converting traditional lights to LED on vehicles, error codes or fast flashing can occur due to lower current draw. This kit prevents these issues by ensuring proper communication between LED lights and the vehicle's electrical system.
Q: Does this kit require any splicing or cutting of wires?
A: No, the kit features plug-and-play installation with Deutsch connectors. Simply plug the cables into the existing wiring system without any splicing, cutting, wiring, or permanent modifications required.
Q: What is the cable length provided?
A: The PATCH-LDV kit provides 600mm cable length, offering optimal reach for tray back installations while maintaining clean professional appearance without excessive cable slack.
Q: What warranty is included with this conversion kit?
A: This LED Autolamps conversion kit is backed by a one year warranty, ensuring product quality and reliability for professional tray back lighting conversions.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
