STEDI ST-04-G4-001 G4 Black Spot Work Light Delivering maximum beam distance and intensity from four CREE XP-L2 LEDs, the STEDI G4 Black Spot reaches 235 metres at 1 LUX with a near-field zone of 28 metres, all in a fully sealed IP68 and IP69K rated housing with CISPR 25 C3 certification. Product Overview The ST-04-G4-001 is STEDI's G4 Black Spot Work Light, powered by four CREE XP-L2 LEDs producing 4000 raw lumens and 3000 tested lumens through an optimised spot reflector at 5700K white light. The concentrated beam reaches 235 metres in length at the 1 LUX threshold while the optimised reflector simultaneously illuminates a near-field zone of 28 metres in width, ensuring the critical area immediately around the vehicle or worksite is covered alongside the long-range forward beam. The 5700K colour temperature delivers a brilliant white light that reduces glare and eye strain during extended use. The G4 Spot is a multipurpose auxiliary light suited to worksite and agricultural use, front-facing motorcycle and ATV lighting, and 4WD auxiliary driving light applications where maximum forward reach is the priority. Rated IP68 and IP69K for complete dust and waterproof protection including high-pressure and high-temperature wash-down environments, shock tested at 30Gs and vibration tested at 5Gs. CISPR 25 C3 certification suppresses electromagnetic interference, protecting onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. Compatible with both 12V and 24V systems, drawing 3.2A at 13.5V. The die-cast aluminium housing carries a premium AkzoNobel powder coat finish in black with a polycarbonate lens. Rated for 50,000 hours LED lifespan. Features & Benefits 4x CREE XP-L2 LEDs at 40W Total: Four premium CREE XP-L2 LED emitters provide the optical efficiency and thermal management required for sustained high-output performance, producing 4000 raw lumens and 3000 independently tested lumens through the optimised spot reflector. Concentrated Spot Beam at 1 LUX, 235m: The spot reflector concentrates output into a powerful forward beam reaching 235 metres at the 1 LUX threshold, providing the greatest forward reach of the G4 range and making the G4 Spot the right choice for applications where maximum distance illumination is the primary requirement. 28m Near-Field Width: The optimised reflector simultaneously illuminates a near-field zone of 28 metres wide, ensuring the critical area immediately around the vehicle or worksite is not left in darkness while the long-range beam is active. 5700K White Light with Reduced Glare: The 5700K colour temperature produces brilliant white light that reduces glare and eye strain during extended work sessions, providing high contrast and accurate colour rendering at distance. IP68 and IP69K Dual Rating: The dual IP68 and IP69K certification confirms complete dust and waterproof protection against continuous water immersion and high-pressure, high-temperature water jet wash-down, guaranteeing performance even in the harshest environments. CISPR 25 C3 Certified: CISPR 25 C3 electromagnetic compatibility certification suppresses interference with sensitive onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi, making the G4 Spot suitable for vehicles with critical communication equipment. 30G Shock and 5G Vibration Tested: Independently tested to withstand 30G shock loads and 5G sustained vibration, confirming structural and electrical integrity under the mechanical demands of motorcycle, ATV, off-road, and agricultural machinery applications. 12V and 24V Compatibility: Operates on both 12V and 24V electrical systems, making it compatible with motorcycles, passenger vehicles, light commercial vehicles, trucks, and agricultural machinery. Premium AkzoNobel Powder Coat Finish: The housing carries a premium AkzoNobel powder coat in black, known for its adhesion, hardness, and resistance to chipping, UV degradation, and chemical exposure in outdoor applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The die-cast aluminium housing provides structural rigidity and thermal management for the LED array, and the polycarbonate lens provides impact resistance and optical clarity throughout the rated 50,000-hour lifespan. Technical Specs Specification Detail SKU ST-04-G4-001 Brand STEDI LED 4x CREE XP-L2 LED Power Output 4 x 10W (40W total) Raw Lumens 4,000 lm Tested Lumens 3,000 lm Beam Type Spot 1 LUX Distance (Length) 235m 1 LUX Distance (Width) 28m Colour Temperature 5700K Operating Voltage 12V and 24V Amp Draw 3.2A @ 13.5V IP Rating IP68 and IP69K CISPR Rating CISPR 25 C3 Shock Tested 30G Vibration Tested 5G Housing Material Die-cast aluminium Lens Material Polycarbonate Finish Premium AkzoNobel powder coat, black Hardware Stainless steel LED Lifespan 50,000 hours Weight 1.0 kg What's in the Box 1x STEDI G4 Spot Light 1x STEDI Black Cover 1x Stainless Steel Hardware 1x Stainless Steel Bracket 1x 2-Pin Male Connector Goes Well With The ST-04-G4-001 is the long-range option in the STEDI G4 range, best suited to 4WD auxiliary driving light setups, front-facing motorcycle and ATV lighting, and worksite and agricultural applications where maximum forward beam distance is the priority. It pairs naturally with the G4 Flood (ST-04-G4-003) or G4 Ultra Flood (ST-04-G4-004) in a multi-light configuration, where the Spot covers distance and the Flood covers the near-field width the Spot's 28-metre beam leaves relatively narrow. A STEDI or compatible wiring harness with switch is recommended for clean vehicle installation. Frequently Asked Questions How does the G4 Spot compare to the G4 Hybrid and G4 Flood in the same range? All G4 variants use the same 4x CREE XP-L2 LEDs, 40W total power, 3000 tested lumens, housing, and certifications. The G4 Spot (ST-04-G4-001) delivers the greatest forward reach at 235 metres in length with a 28-metre near-field width, optimised for maximum distance illumination. The G4 Hybrid (ST-04-G4-002) combines spot and flood for 160 metres in length and 50 metres in width. The G4 Flood (ST-04-G4-003) reaches 81 metres at 60° and approximately 40 metres wide. The G4 Ultra Flood (ST-04-G4-004) delivers the broadest near-field coverage at 80° with a 37-metre-wide flood zone at 42 metres. What does IP69K add to IP68 protection? IP68 certifies the light is sealed against continuous water immersion at specified depth and duration. IP69K is an additional certification covering high-pressure and high-temperature water jet wash-down, encountered when hosing down agricultural machinery, motorcycles, and work vehicles. The G4's dual IP68 and IP69K rating confirms it is protected against both scenarios. What does CISPR 25 C3 mean for motorcycle and vehicle installations? CISPR 25 is an international standard measuring radio frequency emissions produced by vehicle components. C3 is the highest performance class within CISPR 25, confirming the G4 Spot produces minimal electromagnetic interference that could affect onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. This is particularly important for motorcycles using Bluetooth intercoms and 4WD vehicles relying on UHF CB communication. Is the G4 Spot road-legal as an auxiliary driving light? The source data does not specify road legality for the G4 Spot. Please verify compliance with Australian road vehicle standards and applicable state regulations before mounting the G4 Spot in a forward-facing driving light position on a road-registered vehicle. What is the rated lifespan of the CREE XP-L2 LEDs? The CREE XP-L2 LEDs in the G4 are rated for 50,000 hours of operating life. At typical auxiliary light usage of 2-4 hours per day, this equates to many decades of service before the LEDs reach their rated end-of-life output level under normal use patterns.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI ST-04-G1-001 G1 Black Flood Work Light Small in size and mighty in power, the STEDI G1 Black Flood delivers 750 tested lumens from a single CREE XP-L2 LED across an 18-metre by 21-metre flood zone at 1 LUX, in the most compact housing in the STEDI G Series. Product Overview The ST-04-G1-001 is STEDI's G1 Black Flood Work Light, the smallest and most compact model in the STEDI G Series, powered by a single CREE XP-L2 LED producing 1000 raw lumens and 750 tested lumens through an optimised flood reflector and lens at 5700K white light. Despite its ultra-compact form factor, the G1 Flood reaches 18 metres in length and 21 metres in width at the 1 LUX threshold, providing a wide near-field flood zone from a single LED housing that weighs just 0.290kg. The versatile design suits a wide range of applications including work and camp lighting, rear-mounted reverse lights, and any position where the larger G2 or G4 housings cannot be accommodated. The 5700K colour temperature delivers brilliant white light with reduced glare and eye strain. Rated IP68 and IP69K for complete dust and waterproof protection including high-pressure wash-down environments, shock tested at 30Gs and vibration tested at 5Gs. CISPR 25 C3 certification suppresses electromagnetic interference, protecting onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. Compatible with both 12V and 24V systems, drawing just 0.8A at 13.5V. The die-cast aluminium housing carries a premium AkzoNobel powder coat finish in black with a polycarbonate lens, stainless steel hardware and bracket, and a STEDI protective cover included. Rated for 50,000 hours LED lifespan. Features & Benefits Single CREE XP-L2 LED at 10W: One premium CREE XP-L2 LED produces 1000 raw lumens and 750 independently tested lumens through the optimised flood reflector, delivering meaningful work light output from the most compact possible single-LED housing in the STEDI G Series. Flood Beam at 1 LUX, 18m x 21m: The flood reflector and lens produce an illuminated zone of 18 metres in length and 21 metres in width at the 1 LUX threshold, providing broader lateral coverage than forward reach, suited to reverse lighting, campsite illumination, and close-range task work. Ultra-Compact and Lightweight at 0.290kg: At 0.290kg and in the smallest housing in the G Series, the G1 Flood can be mounted in positions where even the G2 range cannot fit, including tight reverse light recesses, compact bracket mounts, and weight-critical installations. 5700K White Light: The 5700K colour temperature produces brilliant white light that accurately renders colours, reduces glare and eye strain, and provides high contrast for task and reverse lighting applications. Ultra-Low Current Draw at 0.8A: Drawing just 0.8A at 13.5V, the G1 Flood is the most power-efficient model in the G Series, making it suitable for battery-sensitive installations and multi-light setups where total current draw must be minimised. IP68 and IP69K Dual Rating: The dual IP68 and IP69K certification confirms complete dust and waterproof protection against continuous water immersion and high-pressure, high-temperature water jet wash-down. CISPR 25 C3 Certified: CISPR 25 C3 electromagnetic compatibility certification suppresses interference with onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. 30G Shock and 5G Vibration Tested: Independently tested to withstand 30G shock loads and 5G sustained vibration, confirming structural and electrical integrity for work vehicle, off-road, and motorcycle applications. 12V and 24V Compatibility: Operates on both 12V and 24V electrical systems, making it compatible with motorcycles, passenger vehicles, light commercial vehicles, trucks, and agricultural machinery. Premium AkzoNobel Powder Coat Finish: The housing carries a premium AkzoNobel powder coat in black, known for its adhesion, hardness, and resistance to chipping, UV degradation, and chemical exposure in outdoor applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The die-cast aluminium housing provides structural rigidity and thermal management, and the polycarbonate lens provides impact resistance and optical clarity throughout the rated 50,000-hour lifespan. Technical Specs Specification Detail SKU ST-04-G1-001 Brand STEDI LED 1x CREE XP-L2 LED Power Output 1 x 10W Raw Lumens 1,000 lm Tested Lumens 750 lm Beam Type Flood 1 LUX Distance (Length) 18m 1 LUX Distance (Width) 21m Colour Temperature 5700K Operating Voltage 12V and 24V Amp Draw 0.8A @ 13.5V IP Rating IP68 and IP69K CISPR Rating CISPR 25 C3 Shock Tested 30G Vibration Tested 5G Housing Material Die-cast aluminium Lens Material Polycarbonate Finish Premium AkzoNobel powder coat, black Hardware Stainless steel LED Lifespan 50,000 hours Weight 0.290 kg What's in the Box 1x STEDI G1 Flood Light 1x STEDI Black Cover 1x Stainless Steel Hardware 1x Stainless Steel Bracket 1x 2-Pin Male Connector Goes Well With The ST-04-G1-001 is well suited to rear-mounted reverse lighting, compact work and campsite illumination, and any position where the smaller G Series housing is required. It pairs naturally with other STEDI G1, G2, and G4 lights in multi-light vehicle setups for comprehensive coverage across different mounting positions and output requirements. For applications requiring greater output in a similarly compact form factor, the G2 Flood (ST-04-G2-001) provides 1500 tested lumens at 20W from a slightly larger housing. A STEDI or compatible wiring harness with switch is recommended for clean vehicle installation. Frequently Asked Questions How does the G1 Flood compare to the G2 Flood and G2 Flush in the G Series? The G1 Flood is the smallest and lightest model in the range with a single CREE XP-L2 LED producing 750 tested lumens at 0.8A and weighing 0.290kg, with a flood zone of 18m x 21m. The G2 Flood uses two CREE XP-L2 LEDs producing 1500 tested lumens at 1.6A and weighing 0.420kg, with a flood zone of 30m x 28m. The G2 Flush uses two CREE XP-L2 LEDs producing 1500 tested lumens at 0.8A and weighing 0.328kg with the same flood zone, but in a flush-mount housing. Choose the G1 when the smallest possible housing is the priority, the G2 Flood when higher output with surface-mount flexibility is needed, and the G2 Flush when flush-mount installation is required. Is the G1 Flood suitable as a reverse light replacement? Yes. STEDI specifically lists rear-mounted reverse lighting as a primary application for the G1 Flood. The ultra-compact housing can be installed in tight reverse light recesses, and the 18m x 21m flood zone with broader lateral spread than forward reach is well suited to illuminating the area directly behind the vehicle during reversing. Confirm compliance with applicable Australian road vehicle standards before installing as a replacement or supplementary reverse light on a road-registered vehicle. What does IP69K add to IP68 protection? IP68 certifies the light is sealed against continuous water immersion at specified depth and duration. IP69K is an additional certification covering high-pressure and high-temperature water jet wash-down, encountered when hosing down vehicles and equipment. The G1 Flood's dual IP68 and IP69K rating confirms it is protected against both scenarios. What does CISPR 25 C3 mean for vehicle installations? CISPR 25 is an international standard measuring radio frequency emissions produced by vehicle components. C3 is the highest performance class within CISPR 25, confirming the G1 Flood produces minimal electromagnetic interference that could affect onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. What is the rated lifespan of the CREE XP-L2 LED? The single CREE XP-L2 LED in the G1 Flood is rated for 50,000 hours of operating life. At typical auxiliary light usage of 2-4 hours per day, this equates to many years of service before the LED reaches its rated end-of-life output level under normal use patterns.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Great Whites Daytime Running Light Kit: Kit Suits Positive and Negative Switching Vehicles and Comprise Eight Philips LEDsKit suits positive and negative switching vehicles and comprise eight Philips LEDs. Sturdy bracket and wiring harness makes installation simple. DRLs automatically dim when vehicle park lights are turned on. 50,000+ hour operating life, IP68/69K rated, waterproof, 21grms vibration proof. With a whiter, brighter output than any other light at the time, Great Whites were designed to withstand any environment or driving situation. Note: DRLs can only be installed in the horizontal position.Great Whites was developed by off-road enthusiasts, for off-road enthusiasts. The range produces outstanding light output through the use of high end LEDs and smarter reflector technology. This winning combination creates the optimum driving light pattern allowing you to see further down the road and light up your peripherals, ensuring you don't bump what goes hop in the night.Designed in Australia to suit the harshest Australian off-road conditions, Great White LED Daytime Running Lights are an important safety addition to the range. While the rest of the range helps you see further, DRLs help you be seen from afar, reducing the risk of accident during daylight hours.Tough as nails and covered by a comprehensive five year warranty, Great Whites is an investment in safety for your family and vehicle. Why choose LED?LED is the evolution of halogen and HID. Whilst HID can reach significant distances, they still rely on using globes which are fragile and cannot last driving on rough surfaces such as old roads, corrugated surfaces or off-road tracks. LED driving lights do not have a globe, making them more sturdy and long lasting. A typical LED will last in excess of 50,000 hours and will light instantly, unlike HID which will last up to 2,500 hours and has an initial warm up period.Importantly, high performance LED driving lights can operate at 6000K, the colour of the midday sun. This colour temperature is an important safety feature as it reduces fatigue through minimised eye strain.LEDs have a low current draw making them a more efficient light source compared to halogen and HID lights.Great Whites GWF1023 Features: LEDS: Philips Luxeon-C Raw Lumens: 380 Effective Lumens: 247 Voltage: 10-30V Current Draw: 0.5A@12V Colour temperature: 6000K Environment: IP68/69K (Dust proof/submersible to 3m) Vibration: 21 Grms Weight: 0.22kg Dimensions (HxLxD): 127 x 25 x 54mm Legendary Products & Support From Authorized Dealers When you choose Great Whites, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Great Whites dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Great Whites's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Great Whites dealer today!

Read more less

Great Whites Driving Light Polycarbonate Lens Cover Red Lens Cover RedSuit all great whites round LED driving lights.Great Whites GWA0006 Features: Shatterproof Poly-Carbonate Protects from Rock & Debris Impact Fully Gasketed for Added Dust & Water Protection Yellow Covers Help Penetrate Fog Blue Covers Help Penetrate Salt Spray when Beach Driving & Also Help Penetrate Snow Red Covers Help Penetrate Dust Legendary Products & Support From Authorized Dealers When you choose Great Whites, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Great Whites dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Great Whites's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Great Whites dealer today!

Read more less

Roadvision RDL6901SD Stealth PRO 9" LED Driving Light 143W Spot Beam A 9" 143W spot beam LED driving light from the Roadvision Stealth PRO Series, the RDL6901SD delivers 10,485 lumens per light (20,970lm per pair) with a beam distance of 912 metres at 1 lux per light (1,289m per pair), powered by 34 x 3W Osram LEDs in a die-cast aluminium housing with polycarbonate lens, featuring dynamic start-up DRL, IP68 and IP69K protection, and a 7-year warranty. Product Overview The Roadvision RDL6901SD is a 9" round spot beam driving light from the Stealth PRO Series, featuring the same contemporary bezel-less design as the RDL6701SD with a black cover and dedicated DRL window housing a dynamic start-up Daytime Running Light. The DRL seamlessly darkens when not illuminated for a clean, understated appearance when the driving lights are off. Blackout mounting hardware maintains the stealth aesthetic. Thirty-four 3W Osram LEDs produce 143W of super-white light close to daylight with a 50,000 hour LED lifespan via solid-state technology. The RDL6901SD is the larger and more powerful sibling to the RDL6701SD, delivering an impressive 10,485lm per light and up to 912 metres of beam penetration at 1 lux per light, making it one of the most capable driving lights in the Stealth PRO range. Roadvision's Thermal Management Technology ensures superior performance and durability across all operating environments. IP68 and IP69K protection, multi-volt 10-30V DC input with over/under voltage and reverse polarity protection, simple 2-wire installation via 2-pin Deutsch plug, and EMI/EMC radio interference approval. Features & Benefits 10,485 Lumens per Light - 912 Metre Beam at 1 Lux: The RDL6901SD delivers 10,485lm per light (20,970lm per pair) with a maximum beam distance of 912 metres at 1 lux per light (1,289m per pair), providing exceptional long-range illumination capability for remote area and high-speed night driving. 34 x 3W Osram LEDs - 143W Output: Thirty-four 3W Osram LEDs produce 143W of super-white output close to daylight colour temperature, delivering natural and accurate colour rendering across the full beam throw. Dynamic Start-Up DRL with Black Cover and DRL Window: The Stealth PRO Series dynamic start-up DRL provides an animated activation sequence via the dedicated DRL window in the black cover, with the DRL seamlessly darkening when not in use to maintain the bezel-less stealth appearance. Blackout Mounting Hardware: All mounting hardware is finished in black for a professional, factory-consistent appearance on the vehicle. Roadvision Thermal Management Technology: The integrated Thermal Management Technology manages heat dissipation from the 34-LED array and driver electronics at 143W sustained output, ensuring consistent performance and long-term reliability. IP68 and IP69K Protection: Both IP68 and IP69K protection ratings confirm full resistance to sustained submersion and high-pressure, high-temperature water jet exposure for off-road, agricultural, and marine vehicle applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and efficient heat transfer at the elevated 143W output, while the polycarbonate lens resists impact and UV degradation. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated LED lifespan provides long-term maintenance-free reliability. Multi-Volt 10-30V DC with Over/Under Voltage and Reverse Polarity Protection: Compatible with 12V and 24V vehicle electrical systems with full electronic protection for the LED driver against voltage anomalies and wiring errors. Simple 2-Wire Installation via 2-Pin Deutsch Plug: The 2-pin Deutsch plug provides a secure, weatherproof connection with red (positive) and black (negative) wires for the driving light circuit. DRL halo connects via the separate green wire positive. EMI/EMC Radio Interference Approved: Confirmed compatible with vehicle communication, navigation, and electronic systems without interference. 7-Year Warranty: The RDL6901SD is backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RDL6901SD Brand Roadvision Series Stealth PRO Description 9" LED Driving Light 10-30V Round 143W Spot Beam Beam Pattern Spot Maximum Lumens per Light 10,485lm Maximum Lumens per Pair 20,970lm Maximum Lux at 10m per Light 8,311lx Maximum Lux at 10m per Pair 16,622lx Maximum Beam Distance at 1lx per Light 912m Maximum Beam Distance at 1lx per Pair 1,289m Input Voltage 10-30V DC Maximum Watts 143W LED Quantity 34 x 3W Osram Current Draw 10.34A at 13.8V Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring - Driving Light 2-Pin Deutsch Plug (Red +Ve, Black -Ve) Wiring - DRL Halo Green Wire +Ve Dimensions 238mm x 87mm x 249mm IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Warranty 7 Years Compatible With The RDL6901SD is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. The 2-pin Deutsch plug provides a secure weatherproof connection for the driving light circuit. The DRL halo connects separately via the green wire positive. Confirm mounting clearance and wiring loom compatibility for your specific vehicle before purchase. Sold individually; pair pricing refers to two units. Frequently Asked Questions Are the RDL6901SD driving lights sold individually or as a pair? The RDL6901SD is sold individually. Lumen, lux, and beam distance figures in brackets refer to a pair of two lights. Confirm the quantity required for your installation before purchase. What is the difference between the RDL6901SD and the RDL6701SD? Both are from the Stealth PRO Series and share the same design, DRL, mounting hardware, IP ratings, protection features, and warranty. The RDL6901SD is a 9" unit producing 143W from 34 x 3W Osram LEDs with 10,485lm per light and 912m beam distance at 1 lux. The RDL6701SD is a 7" unit producing 68W from 16 x 3W Osram LEDs with 5,130lm per light and 631m beam distance at 1 lux. Choose the RDL6901SD for maximum output and beam throw in demanding remote area and high-speed driving applications. Is the RDL6901SD compatible with 24V vehicles? Yes. The RDL6901SD operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What does IP68 and IP69K mean for the RDL6901SD? IP68 confirms protection against sustained water submersion beyond 1 metre depth. IP69K confirms protection against high-pressure, high-temperature water jet exposure from all angles. Together these provide the highest available ingress protection rating for off-road, agricultural, and marine vehicle applications including vehicle wash-down. What wiring connection does the RDL6901SD use? The driving light circuit uses a 2-pin Deutsch plug with red (positive) and black (negative) wires. The DRL halo connects separately via a green positive wire.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RDL6701SD Stealth PRO 7" LED Driving Light 68W Spot Beam A 7" 68W spot beam LED driving light from the Roadvision Stealth PRO Series, the RDL6701SD delivers 5,130 lumens per light (10,260lm per pair) with a beam distance of 631 metres at 1 lux per light (892m per pair), powered by 16 x 3W Osram LEDs in a die-cast aluminium housing with polycarbonate lens, featuring dynamic start-up DRL, IP68 and IP69K protection, and a 7-year warranty. Product Overview The Roadvision RDL6701SD is a 7" round spot beam driving light from the Stealth PRO Series, featuring a contemporary bezel-less design with a black cover and dedicated DRL window housing a dynamic start-up Daytime Running Light. The DRL seamlessly darkens when not illuminated for a clean, understated appearance when the driving lights are off. Blackout mounting hardware maintains the stealth aesthetic. Sixteen 3W Osram LEDs produce 68W of super-white light close to daylight with a 50,000 hour LED lifespan via solid-state technology. Roadvision's Thermal Management Technology ensures superior performance and durability across all operating environments. The die-cast aluminium housing is lightweight and tough, and the polycarbonate lens provides durable impact resistance. IP68 and IP69K protection covers both sustained immersion and high-pressure water jet exposure. Multi-volt 10-30V DC input with over/under voltage and reverse polarity protection, and simple 2-wire installation via a 2-pin Deutsch plug. EMI/EMC radio interference approved. Features & Benefits 5,130 Lumens per Light - 631 Metre Beam at 1 Lux: The RDL6701SD delivers 5,130lm per light (10,260lm per pair) with a maximum beam distance of 631 metres at 1 lux per light (892m per pair), providing exceptional long-range illumination for night driving in remote and off-road environments. 16 x 3W Osram LEDs - Super White Daylight-Close Output: Sixteen 3W Osram LEDs produce a super-white light output close to daylight colour temperature, providing natural and accurate colour rendering on the road surface and surrounding environment. Dynamic Start-Up DRL with Black Cover and DRL Window: The Stealth PRO Series features a dynamic start-up Daytime Running Light with a dedicated DRL window in the black cover. The DRL seamlessly darkens when not illuminated, maintaining the sleek bezel-less appearance of the light when the DRL is off. Blackout Mounting Hardware: All mounting hardware is finished in black, complementing the stealth aesthetic of the RDL6701SD and providing a professional, factory-consistent appearance on the vehicle. Roadvision Thermal Management Technology: The integrated Thermal Management Technology actively manages heat dissipation from the LED array and driver electronics, ensuring consistent output and long-term reliability across a wide range of operating temperatures and sustained high-power use. IP68 and IP69K Protection: The RDL6701SD holds both IP68 (sustained submersion) and IP69K (high-pressure, high-temperature water jet) protection ratings, providing the highest level of ingress protection for off-road, agricultural, and marine vehicle applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and efficient heat transfer, while the polycarbonate lens resists impact and UV degradation in outdoor environments. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated LED lifespan with maintenance-free solid-state technology provides long-term reliability without the bulb replacement requirements of halogen or HID driving lights. Multi-Volt 10-30V DC with Over/Under Voltage and Reverse Polarity Protection: The 10-30V DC multi-volt input is compatible with both 12V and 24V vehicle electrical systems. Over/under voltage and reverse polarity protection safeguard the electronics from wiring errors and voltage fluctuations. Simple 2-Wire Installation via 2-Pin Deutsch Plug: The 2-pin Deutsch plug provides a secure, weatherproof, and vibration-resistant connection for the driving light circuit, with red (positive) and black (negative) wires. The DRL halo connects via the separate green wire positive. EMI/EMC Radio Interference Approved: The RDL6701SD is EMI/EMC radio interference approved, confirming it will not interfere with vehicle communication systems, navigation, or other electronic equipment. 7-Year Warranty: The RDL6701SD is backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RDL6701SD Brand Roadvision Series Stealth PRO Description 7" LED Driving Light 10-30V Round 68W Spot Beam Beam Pattern Spot Maximum Lumens per Light 5,130lm Maximum Lumens per Pair 10,260lm Maximum Lux at 10m per Light 3,978lx Maximum Lux at 10m per Pair 7,956lx Maximum Beam Distance at 1lx per Light 631m Maximum Beam Distance at 1lx per Pair 892m Input Voltage 10-30V DC Maximum Watts 68W LED Quantity 16 x 3W Osram Current Draw 4.95A at 13.8V Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring - Driving Light 2-Pin Deutsch Plug (Red +Ve, Black -Ve) Wiring - DRL Halo Green Wire +Ve Dimensions 192mm x 78mm x 195mm IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Warranty 7 Years Compatible With The RDL6701SD is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. The 2-pin Deutsch plug provides a secure weatherproof connection for the driving light circuit. The DRL halo connects separately via the green wire positive. Confirm mounting clearance and wiring loom compatibility for your specific vehicle before purchase. Sold individually; pair pricing refers to two units. Frequently Asked Questions Are the RDL6701SD driving lights sold individually or as a pair? The RDL6701SD is sold individually. Lumen, lux, and beam distance figures in brackets refer to a pair of two lights. Confirm the quantity required for your installation before purchase. What is the dynamic start-up DRL on the Stealth PRO Series? The dynamic start-up DRL provides an animated light sequence when the DRL activates, drawing attention to the vehicle during daylight hours. The DRL is housed in a dedicated window in the black cover and seamlessly darkens when not in use, maintaining the sleek bezel-less appearance of the light. Is the RDL6701SD compatible with 24V vehicles? Yes. The RDL6701SD operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems including trucks and heavy commercial vehicles. What does IP68 and IP69K mean for the RDL6701SD? IP68 confirms the light is protected against sustained submersion in water beyond 1 metre. IP69K confirms protection against high-pressure, high-temperature water jet exposure from all angles. Together these ratings provide the highest available level of ingress protection, suited to off-road, agricultural, and marine vehicle applications including vehicle wash-down. What wiring connection does the RDL6701SD use? The driving light circuit uses a 2-pin Deutsch plug with red (positive) and black (negative) wires. The DRL halo connects separately via a green positive wire. Deutsch connectors are widely used in automotive and off-road applications for their secure, weatherproof, and vibration-resistant connection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RDL7800C Dynamilux 8" LED Driving Light 180W Combination Beam An 8" 180W combination beam LED driving light from the Roadvision Dynamilux Series, the RDL7800C delivers 9,900 lumens per light (19,800lm per pair) with a beam distance of 834 metres at 0.5 lux per light (1,180m per pair), powered by 18 x 10W Osram LEDs at 5700K colour temperature, featuring dual-colour dynamic start-up DRL with amber and white options, Thermal Management Technology, IP67 protection, and a 7-year warranty. Product Overview The Roadvision RDL7800C is an 8" combination beam driving light from the Dynamilux Series, designed for drivers who demand reliability, performance, and style. The combination beam pattern delivers both long-range spot-style throw and broader flood-style width for comprehensive coverage during night driving. Eighteen 10W Osram LEDs produce 180W at a crisp 5700K colour temperature, delivering 9,900lm per light with 3,480 lux at 10 metres per light and a beam reach of 834 metres at 0.5 lux per light (1,180m per pair). The Dynamilux Series features a dual-colour dynamic start-up DRL switchable between amber and white modes, housed in a dedicated DRL window in the included black protective cover. Blackout mounting hardware maintains a modern, understated aesthetic. Roadvision's Thermal Management Technology manages heat dissipation across the 180W LED array for consistent output and long-term reliability. IP67 rated for water and dust resistance. Multi-volt 10-30V DC input with over/under voltage and reverse polarity protection, and EMI/EMC radio interference approval. The 4-pin Deutsch plug provides separate connections for driving light power (red positive, black negative) and DRL selection (yellow for amber DRL, white for white DRL). The RDL7800C also features a selectable power mode - standard low-power mode or high-power mode, switchable by cycling the lamp on and off 4 times within 50 seconds. Backed by a 7-year warranty. Features & Benefits 9,900 Lumens per Light - 834 Metre Beam at 0.5 Lux: The RDL7800C delivers 9,900lm per light (19,800lm per pair) with a beam distance of 834 metres at 0.5 lux per light (1,180m per pair) and 590 metres at 1 lux per light (834m per pair), providing exceptional illumination capability for high-speed and remote area night driving. 18 x 10W Osram LEDs - 180W at 5700K: Eighteen 10W Osram LEDs produce 180W of crisp 5700K daylight-close output for natural colour rendering and maximum road surface clarity. Combination Beam Pattern: The combination beam delivers both long-range penetration and broader lateral coverage from a single light unit, providing a comprehensive illumination spread suited to a wide range of driving environments and conditions. Dual-Colour Dynamic Start-Up DRL - Amber and White: The dynamic start-up DRL is switchable between amber and white modes via the dedicated DRL wires, providing a choice of DRL colour to suit the vehicle's aesthetic. The DRL is housed in a dedicated window in the black protective cover and seamlessly darkens when not in use. Blackout Mounting Hardware: All mounting hardware is finished in black for a modern, factory-consistent appearance on the vehicle. Roadvision Thermal Management Technology: Integrated Thermal Management Technology monitors and manages heat dissipation across the 18-LED, 180W array, ensuring consistent output and long-term reliability across all operating environments and ambient temperatures. Selectable Low-Power and High-Power Modes: The RDL7800C operates in low-power mode by default. High-power mode can be activated permanently by cycling the lamp on and off 4 times within 50 seconds (approximately 1-2 seconds between each cycle). Repeating the same cycle returns the lamp to low-power mode. IP67 Water and Dust Proof: IP67 rating provides full dust ingress protection and waterproof protection against temporary immersion, suited to off-road and all-weather driving applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and efficient heat dissipation, while the polycarbonate lens resists impact and UV degradation. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated LED lifespan provides long-term maintenance-free reliability. Multi-Volt 10-30V DC with Over/Under Voltage and Reverse Polarity Protection: Compatible with 12V and 24V vehicle electrical systems with full electronic protection for the LED driver. 4-Pin Deutsch Plug: The 4-pin Deutsch plug provides separate secure, weatherproof connections for driving light power (red positive, black negative), amber DRL (yellow), and white DRL (white). EMI/EMC Radio Interference Approved: Confirmed compatible with vehicle communication, navigation, and electronic systems without interference. Includes Protective Cover with DRL Windows: A black protective cover with DRL windows is included, providing additional lens protection when the driving lights are not in use while maintaining DRL functionality. 7-Year Warranty: The RDL7800C is backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RDL7800C Brand Roadvision Series Dynamilux Description 8" LED Driving Light 10-30V 180W Combination Beam Beam Pattern Combination Maximum Lumens per Light 9,900lm Maximum Lumens per Pair 19,800lm Lux at 10m per Light 3,480lx Lux at 10m per Pair 6,960lx Beam Distance at 1lx per Light 590m Beam Distance at 1lx per Pair 834m Beam Distance at 0.5lx per Light 834m Beam Distance at 0.5lx per Pair 1,180m Input Voltage 10-30V DC Maximum Watts 180W LED Quantity 18 x 10W Osram Colour Temperature 5700K Current Draw 10.2A at 13.8V Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring 4-Pin Deutsch Plug (Red +Ve, Black -Ve, Yellow Amber DRL, White White DRL) Dimensions 220mm x 80mm x 229mm IP Rating IP67 Power Modes Low-Power (default) and High-Power (selectable) LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Includes Black Protective Cover with DRL Windows Warranty 7 Years Compatible With The RDL7800C is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. The 4-pin Deutsch plug provides separate connections for driving light power and DRL colour selection (amber via yellow wire, white via white wire). Confirm mounting clearance and wiring loom compatibility for your specific vehicle before purchase. Sold individually; pair figures refer to two units. Frequently Asked Questions Are the RDL7800C driving lights sold individually or as a pair? The RDL7800C is sold individually. Lumen, lux, and beam distance figures in brackets refer to a pair of two lights. Confirm the quantity required for your installation before purchase. How do I switch the RDL7800C between low-power and high-power mode? The RDL7800C operates in low-power mode by default. To permanently switch to high-power mode, turn the lamp on and off 4 times within 50 seconds with approximately 1-2 seconds between each cycle. Repeating the same 4-cycle process returns the lamp to low-power mode. How do I select between amber and white DRL on the RDL7800C? The amber DRL is activated via the yellow wire and the white DRL is activated via the white wire on the 4-pin Deutsch plug. Connect the appropriate wire to activate the preferred DRL colour. Is the RDL7800C compatible with 24V vehicles? Yes. The RDL7800C operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is included with the RDL7800C? Each RDL7800C includes the driving light unit,Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RDL1701C Essentials DLE Series 2 7" LED Driving Light Set 170W Combination Beam A 7" combination beam LED driving light set from the Roadvision Essentials DLE Series 2, the RDL1701C delivers 16,000 lumens per set with a beam distance of 941 metres at 1 lux per set, powered by 15 x 5W Osram LEDs per light at 170W per set, featuring Thermal Management Technology, IP68 protection, and black protective covers, backed by a 3-year warranty. Product Overview The Roadvision RDL1701C is a 7" combination beam driving light set from the Essentials DLE Series 2, designed for those seeking value without compromising on quality. Fifteen 5W Osram LEDs per light produce super-white daylight-close output across a combination beam pattern, delivering 16,000 lumens per set with 8,790 lux at 10 metres per set and a beam reach of 941 metres at 1 lux per set at 170W per set total. Roadvision's Thermal Management Technology manages heat dissipation for consistent output and long-term reliability. IP68 rated die-cast aluminium housing with polycarbonate lens. Multi-volt 10-30V DC input at 12.32A per set at 13.8V with over/under voltage and reverse polarity protection. EMI/EMC radio interference approved. Simple 2-wire installation via 2-pin Deutsch plug. Includes black protective covers. 50,000 hour LED lifespan. Backed by a 3-year warranty. Features & Benefits 16,000 Lumens Per Set - 941 Metre Beam at 1 Lux: The RDL1701C delivers 16,000lm per set with 8,790 lux at 10 metres per set and a beam reach of 941 metres at 1 lux per set, providing strong long-range illumination for night driving in remote and off-road environments. 15 x 5W Osram LEDs Per Light - Super White Output: Fifteen 5W Osram LEDs per light produce a super-white output close to daylight colour temperature for natural colour rendering and clear road surface visibility. Combination Beam Pattern: The combination beam delivers both long-range spot-style penetration and broader flood-style lateral coverage from a single light unit for comprehensive road illumination. Thermal Management Technology: Roadvision's Thermal Management Technology actively manages heat dissipation across the LED array, ensuring consistent output and long-term reliability across all operating environments. IP68 Water and Dust Proof: IP68 rating provides full dust ingress protection and waterproof protection against sustained immersion, suited to off-road and all-weather driving applications. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight die-cast aluminium housing with polycarbonate lens provides structural rigidity and effective heat dissipation. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated LED lifespan provides long-term maintenance-free reliability. Multi-Volt 10-30V DC with Over/Under Voltage and Reverse Polarity Protection: Compatible with 12V and 24V vehicle electrical systems with full electronic protection for the LED driver. EMI/EMC Radio Interference Approved: Confirmed compatible with vehicle communication, navigation, and electronic systems without interference. Simple 2-Wire Installation via 2-Pin Deutsch Plug: Secure, weatherproof, and vibration-resistant 2-wire connection for straightforward installation. Includes Black Protective Covers: Black protective covers are included for additional lens protection when driving lights are not in use. 3-Year Warranty: Backed by a 3-year Roadvision warranty. Technical Specs Specification Detail SKU RDL1701C Brand Roadvision Series Essentials DLE Series 2 Description RDL7800 Series 7" Round Combination Beam Beam Pattern Combination Maximum Lumens 16,000lm Per Set Maximum Lux at 10m 8,790lx Per Set Maximum Beam Distance at 1lx 941m Per Set Input Voltage 10-30V DC Maximum Watts 170W Per Set LED Quantity 15 x 5W Osram Per Light Current Draw 12.32A at 13.8V Per Set Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring 2-Pin Deutsch Plug Dimensions 178mm x 193mm x 82mm IP Rating IP68 LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Includes Black Protective Covers Warranty 3 Years Compatible With The RDL1701C is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. The 2-pin Deutsch plug provides a secure weatherproof 2-wire connection. Sold as a set of two lights. A 9" version is available as the RDL1901C. Frequently Asked Questions Is the RDL1701C sold as a pair or individually? The RDL1701C is sold as a set. All lumen, lux, wattage, and beam distance figures are stated per set of two lights. Is the RDL1701C compatible with 24V vehicles? Yes. The RDL1701C operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is the difference between the RDL1701C and the RDL1901C? Both are from the Essentials DLE Series 2 and share the same design, technology, and features. The RDL1701C is a 7" set producing 170W and 16,000lm per set with a 941m beam reach at 1 lux. The RDL1901C is a 9" set producing 240W and 20,800lm per set with a 1,155m beam reach at 1 lux. Choose the RDL1901C for maximum output and beam throw. Does the RDL1701C include protective covers? Yes. Black protective covers are included with the RDL1701C set. What is Thermal Management Technology on the RDL1701C? Roadvision's Thermal Management Technology actively monitors and manages heat dissipation from the LED array, ensuring consistent light output and long-term reliability across all operating temperatures and environments.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RDL8800C Stealth S8 8" LED Driving Light 132W Combination Beam An 8" 132W combination beam LED driving light from the Roadvision Stealth S8 Series, the RDL8800C delivers 7,937 lumens per light (15,874lm per pair) with a beam distance of 1,086 metres at 0.5 lux per light (1,536m per pair), powered by 24 x 6W Cree LEDs, featuring amber or white HALO DRL, Thermal Management Technology, IP68 and IP69K protection, and a 7-year warranty. Product Overview The Roadvision RDL8800C is an 8" combination beam driving light from the Stealth S8 Series, designed for larger 4WDs and trucks. The contemporary bezel-less design with black mounting hardware and innovative dual-colour HALO DRL provides both a modern aesthetic and functional daytime running light capability switchable between amber and white. Twenty-four 6W Cree LEDs produce 132W at a super-white daylight-close colour temperature, delivering 7,937lm per light with 5,900 lux at 10 metres per light and a beam reach of 1,086 metres at 0.5 lux per light (1,536m per pair) and 768 metres at 1 lux per light (1,086m per pair). Roadvision's Thermal Management Technology manages heat dissipation across the 132W LED array for consistent output and long-term reliability. IP68 and IP69K dual protection ratings confirm suitability for sustained immersion and high-pressure wash-down applications. Multi-volt 10-30V DC input with over/under voltage and reverse polarity protection. CISPR25 approved. The 2-pin Deutsch plug provides driving light power connection (red positive, black negative), with separate DRL halo connections via blue (amber position light positive) and white (white position light positive) wires. A black protective cover with DRL halo window is included. Backed by a 7-year warranty. Features & Benefits 7,937 Lumens per Light - 1,086 Metre Beam at 0.5 Lux: The RDL8800C delivers 7,937lm per light (15,874lm per pair) with a beam distance of 1,086 metres at 0.5 lux per light (1,536m per pair) and 768 metres at 1 lux per light (1,086m per pair), providing exceptional long-range illumination for larger 4WDs and trucks on remote and high-speed routes. 24 x 6W Cree LEDs - 132W Super White Output: Twenty-four 6W Cree LEDs produce 132W of super-white output close to daylight colour temperature for natural colour rendering and clear road surface visibility. Combination Beam Pattern: The combination beam delivers both long-range spot-style throw and broader flood-style lateral coverage from a single light unit for comprehensive road and verge illumination. Dual-Colour HALO DRL - Amber and White: The innovative dual-colour HALO DRL is switchable between amber and white position light modes via the dedicated DRL wires, providing a choice of DRL colour to suit the vehicle's aesthetic. The HALO is housed in a dedicated window in the included black protective cover and seamlessly darkens when not in use. Blackout Mounting Hardware: All mounting hardware is finished in black, complementing the bezel-less stealth aesthetic and providing a modern, factory-consistent appearance on the vehicle. Roadvision Thermal Management Technology: Integrated Thermal Management Technology monitors and manages heat dissipation across the 24-LED, 132W array, ensuring consistent output and long-term reliability across all operating environments and ambient temperatures. IP68 and IP69K Protection: Both IP68 and IP69K protection ratings confirm full resistance to sustained submersion and high-pressure, high-temperature water jet exposure, suited to off-road, agricultural, and vehicle wash-down applications. Low-Profile Bracket for Bull Bar Applications: The 8" light with low-profile bracket is designed to optimise bull bar space, delivering the output of a 9" light in a more compact and rugged mounting configuration. Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and efficient heat dissipation, while the polycarbonate lens resists impact and UV degradation. 50,000 Hour LED Lifespan with Solid-State Technology: The 50,000 hour rated LED lifespan provides long-term maintenance-free reliability. Multi-Volt 10-30V DC with Over/Under Voltage and Reverse Polarity Protection: Compatible with 12V and 24V vehicle electrical systems with full electronic protection for the LED driver. CISPR25 Approved and Class 3 Approved: The RDL8800C holds CISPR25 and Class 3 approvals, confirming electromagnetic compatibility compliance for on-road and 4WD applications. 2-Pin Deutsch Plug with Separate DRL Halo Wiring: The 2-pin Deutsch plug provides secure, weatherproof driving light power connection. Separate blue (amber DRL positive) and white (white DRL positive) wires provide independent DRL halo colour selection. Includes Protective Cover with DRL Halo Window: A black protective cover with DRL halo window is included, providing additional lens protection when the driving lights are not in use while maintaining DRL functionality. 7-Year Warranty: The RDL8800C is backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RDL8800C Brand Roadvision Series Stealth S8 Description 8" LED Driving Light 10-30V 132W Combination Beam Beam Pattern Combination Maximum Lumens per Light 7,937lm Maximum Lumens per Pair 15,874lm Lux at 10m per Light 5,900lx Lux at 10m per Pair 11,800lx Beam Distance at 1lx per Light 768m Beam Distance at 1lx per Pair 1,086m Beam Distance at 0.5lx per Light 1,086m Beam Distance at 0.5lx per Pair 1,536m Input Voltage 10-30V DC Maximum Watts 132W LED Quantity 24 x 6W Cree Current Draw 9.6A at 13.8V Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring - Driving Light 2-Pin Deutsch Plug (Red +Ve, Black -Ve) Wiring - DRL Halo Blue - Amber Position Light +Ve, White - White Position Light +Ve Dimensions 232mm x 83mm x 218mm IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity Approvals CISPR25, Class 3 Includes Black Protective Cover with DRL Halo Window Warranty 7 Years Compatible With The RDL8800C is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. The 2-pin Deutsch plug provides driving light power connection. Separate blue and white wires provide amber and white DRL halo selection respectively. Confirm mounting clearance and wiring loom compatibility for your specific vehicle before purchase. Sold individually; pair figures refer to two units. Frequently Asked Questions Are the RDL8800C driving lights sold individually or as a pair? The RDL8800C is sold individually. Lumen, lux, and beam distance figures in brackets refer to a pair of two lights. Confirm the quantity required for your installation before purchase. How do I select between amber and white DRL on the RDL8800C? The amber position light DRL is activated via the blue wire positive and the white position light DRL is activated via the white wire positive. Connect the appropriate wire to activate the preferred DRL halo colour. Is the RDL8800C suitable for bull bar mounting? Yes. The S8 Stealth Series features a low-profile bracket specifically designed to optimise bull bar mounting space, delivering the output of a 9" light in a more compact and rugged 8" mounting configuration. What is the difference between the RDL8800C and the RDL7800C? Both are Roadvision 8" combination beam driving lights with dual DRL capability. The RDL8800C is from the Stealth S8 Series using 24 x 6W Cree LEDs at 132W, delivering 7,937lm per light and 1,086m beam reach at 0.5 lux per light, with amber/white HALO DRL and IP68/IP69K rating. The RDL7800C is from the Dynamilux Series using 18 x 10W Osram LEDs at 180W, delivering 9,900lm per light and 834m beam reach at 0.5 lux per light, with amber/white dynamic start-up DRL and IP67 rating. Both carry a 7-year warranty. Is the RDL8800C compatible with 24V vehicles? Yes. The RDL8800C operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less