CTEK 2.5m Comfort Connect Extension Cable: Extend the Range of Your CTEK Charger The CONNECT – Extension Cable is a convenient and secure solution if your CTEK charger needs to be further away from the battery or the vehicle. Simply connect the 2.5m cable to your charger's accessory plug and attach the other end to the sockets on your accessories. CTEK 56-304 Features: 2.5m cable length to give your charger more range CTEK CONNECT system for a secure connection Suitable for use with all CTEK chargers up to 10A using the CONNECT system Splash and dust proof (IP65) Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Highlights: FEATURES: FULLY AUTOMATIC 8 STAGE BATTERY CHARGER COMPATIBLE WITH GEL, AGM, CALCIUM, DEEP CYCLE & LEAD ACID BATTERIES LED CHARGE INDICATORS OVER CHARGING, SHORT CIRCUIT AND TEMPERATURE PROTECTION Legendary Products & Support From Authorized Dealers When you choose Thunder, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Thunder dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Thunder's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Thunder dealer today!

Read more less

Projecta IS2000: Intelli-Start with Unlimited Jumpstarts! Imagine a jump starter for professionals that has UNLIMITED JUMPSTARTS. Projecta IS2000 Professional Jump Starter is ideal for roadside assist, small trucks, agricultural and mid sized earthmoving equipment. Rapid Recharge Technology (RRT)Projecta Intelli-Start are the only jump starters in the world that recharge themselves directly from the vehicle they just started. Simply leave the clamps connected for 40 seconds and the jump starter will be fully recharged meaning it is always ready for the next use. Projecta IS2000 Features: The IS2000 is the world’s first 12/24V jump starter that recharges itself via RRT – Rapid Recharge Technology Specially designed cranking battery – LiFePO4 battery technology engineered for high cranking performance and superior safety Safest jump starter on the market - advanced ‘all-in-one’ protection system preventing surges, short-circuits and overheating Workshop tough – durable high impact housing with rubber over-moulded body No battery operation – can jumpstart vehicle without a starter battery Lightweight & Portable – won’t break your back!! World’s best design and construction – nut and bolt termination Easy to use – intuitive colour screen indicates Alarms, Battery Status and Vehicle Status Premium glass filled nylon clamps Premium EVA carry case, L.E.D work light and USB power bank Projecta IS2000 Specifications: Battery Capacity 2 x 3.0Ah at 12.8V, 24,000mAh at 3.2V (76.8Wh) Battery Chemistry Lithium Iron Phosphate (LiFePO4) Battery Cycles 2000 battery cycles (battery lifespan) Clamp Power 12V 750A / 24V 500A Maximum current available at the clamps Application Professional Types of Vehicle Starts large 12V & 24V vehicles up to 8.0L petrol & 7.0L diesel Recharging Via 12V USB-C lead (12V to USB-A adaptor) 240V Charging Dock (15V 1A AC adaptor) Source RRT Via vehicle starting battery Jump Starter Weight 2.6kg IP Rating IP55 Legendary Products & Support From Authorized Dealers When you choose Projecta, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Projecta dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorised Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Projecta's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Projecta dealer today!

Read more less

CTEK 400mm Long x 10.4mm Comfort Connect M10 Eyelet Hardwire Lead: A Practical Quick Connector for those with Batteries that are Difficult to Access or are Hidden CTEK 56-329 Features: Model: 56-329 Connection: M10 10.5mm Eyelet Lead Length: 400mm Inline Fuse Choose M6 for smaller batteries like a motorcycle/lawn tractor. Choose M8 for top post batteries. Choose M10 for side post batteries. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Making Adventure More Affordable & Accessible for 4WD Enthusiasts! Battery Monitor DisplayThunder’s easy to install Battery Monitor Display allows you to monitor you your battery percentage, current draw, current inwards and wattage usage in one compact and easily accessible screen. Designed to work with most 12 Volt Gel, Lead Acid, Lithium, AGM Deep Cycle, Lithium Ion phosphate and Calcium batteries. Specifications: Operating Voltage: 8 – 60VDC Working Power: 8 – 10mA Standby Power Consumption: 0.50 – 0.8mA Backlit Light Current: 40 – 50mA Battery Capacity: 0.1 – 590Ah Built-in Current: 5-10A Shunt Operating Current: 150A Outside Unit Diameter (W x H x D): 60 x 40 x 10mm Display Window Size (W x H): 32 x 23mm External Dimensions of Shunt (W x H x D): 23 x 18 x 5mm Legendary Products & Support From Authorized Dealers When you choose Thunder, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Thunder dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Thunder's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Thunder dealer today!

Read more less

Victron Energy Orion-Tr Smart 24/12-20A Intelligent Isolated DC-DC Charging for Dual Battery Systems Product Overview The Victron Energy Orion-Tr Smart 24/12-20A (ORI241224120) is a professional-grade isolated DC-DC charger rated at 20 amps and 240 watts, designed to charge a 12V secondary (house or lithium) battery from a 24V primary (starter) system in dual battery setups across vehicles, 4WDs, boats, and off-grid installations. Unlike a basic DC-DC converter, the Orion-Tr Smart is a true 3-stage adaptive charger delivering Bulk, Absorption, and Float charge stages to both lead acid and lithium battery chemistries, with eight pre-programmed battery profiles and a fully programmable custom algorithm configurable through the VictronConnect app via built-in Bluetooth. What makes the Orion-Tr Smart the correct choice for modern vehicles is its smart alternator compatibility. Current-generation vehicles use ECU-controlled variable-voltage alternators that can confuse or damage basic DC-DC converters. The Orion-Tr Smart includes an engine running detection mechanism that actively monitors whether the alternator is supplying power preventing the charger from discharging the starter battery when the engine is off or the alternator is in a low-output phase. The unit is galvanically isolated between input and output, making it suitable for marine applications and lithium battery systems with BMS control. It operates to IP43, sustains full rated output to 40°C, and can handle up to 55°C with thermal derating relevant in Australian 4WD and marine environments where ambient temperatures regularly challenge electronics. Key Specifications Part Number: ORI241224120 Charger Type: Isolated DC-DC adaptive 3-stage charger Input Voltage: 24V DC nominal Output Voltage: 12V DC Output Current: 20A Output Power: 240W Isolation: Galvanically isolated (input and output fully separated) Charge Algorithm: Adaptive 3-stage — Bulk, Absorption, Float Battery Compatibility: Lead acid (all types) and lithium Pre-Programmed Profiles: 8 (plus fully custom programmable) Bluetooth: Built-in (VictronConnect app — iOS and Android) Smart Alternator Compatible: Yes — engine running detection Remote On/Off: Yes — hardwired connector or VictronConnect app Parallel Operation: Yes — unlimited units IP Rating: IP43 Operating Temperature: Full rated output to 40°C; operates to 55°C with thermal derating Protection: Over-temperature with power derating, overload, short circuit, connector over-temperature Features & Benefits Galvanic Isolation — The input (24V starter) and output (12V secondary) circuits are fully electrically separated. This protects the secondary lithium battery and BMS from starter battery noise and voltage events, prevents stray current corrosion in marine installations, and allows correct BMS integration where the secondary battery's charge/discharge cycle must be independently managed. True 3-Stage Adaptive Charging — Bulk, Absorption, Float — The Orion-Tr Smart charges like a proper battery charger, not just a DC power supply. Bulk delivers maximum available current to rapidly recharge a depleted battery. Absorption holds at the correct voltage to fully saturate the cells without overcharging — with adaptive absorption time that shortens for shallow discharges and extends for deep discharges on lead acid, and a fixed 2-hour default for lithium. Float maintains a full battery at a safe holding voltage. This is the charge profile your secondary battery needs for long-term health — a flat DC voltage from a basic converter is not. Smart Alternator Compatibility with Engine Running Detection — Modern ECU-controlled alternators vary their output voltage and can shut down during low-demand phases — a basic DC-DC converter may interpret a shut-down alternator as a power source and discharge the starter battery. The Orion-Tr Smart detects whether the alternator is actively supplying power and disables itself when it is not, protecting the starter battery in all conditions. Built-in Bluetooth — VictronConnect App — Monitor charging status, configure battery profiles, adjust charge parameters, and update firmware wirelessly from any iOS or Android device. No wiring to a GX device required for basic monitoring — Bluetooth provides direct phone-to-charger access in the field. Lead Acid and Lithium Compatible — Eight pre-programmed profiles cover the full range of lead acid battery types (flooded, AGM, gel) and lithium chemistries, with a fully programmable custom algorithm available for non-standard battery specifications. Switch profiles via the app — no hardware changes required. Remote On/Off — Hardwired and App-Controlled — Enable and disable the charger via a hardwired remote switch, a BMS output signal, or directly through the VictronConnect app. Supports both user-operated manual control and automatic BMS-driven charge management. Unlimited Parallel Operation — Multiple Orion-Tr Smart units can be connected in parallel without limit to increase combined charging current — scale to 40A, 60A, 80A, or beyond by adding units. Each unit operates independently, maintaining its own charge algorithm. IP43 Rated — Protected against solid objects greater than 1mm and water spray up to 60° from vertical. Suitable for enclosed panel, under-bonnet, and protected bilge installations — not designed for direct rain or immersion exposure without an enclosure. Full Output to 40°C — Operates to 55°C — Sustains full 20A rated output in ambient temperatures up to 40°C. Above 40°C the unit applies progressive thermal derating rather than hard cut-off, maintaining some output even in hot engine bays and tropical conditions — relevant across the Australian climate range. Over-Temperature Power Derating — Rather than shutting down abruptly when hot, the charger progressively reduces output to keep operating temperatures safe. Charging continues at a reduced rate rather than stopping entirely — important for live systems that cannot afford an unplanned interruption. Connector Over-Temperature Protection — Independent protection for the terminal block and connector assembly, guarding against heat buildup at the connection points under sustained high-current operation. Technical Specs Specification Detail Part Number ORI241224120 Charger Type Isolated DC-DC adaptive 3-stage charger Input Voltage 24V DC nominal Output Voltage 12V DC Output Current 20A Output Power 240W Isolation Galvanically isolated Charge Stages Bulk, Absorption, Float Adaptive Absorption Yes — lead acid (depth-based); lithium fixed 2hr default Battery Profiles 8 pre-programmed + fully custom Battery Compatibility Lead acid (all types) + lithium Bluetooth Built-in (VictronConnect — iOS and Android) Smart Alternator Compatible Yes — engine running detection Remote On/Off Yes — hardwired connector and VictronConnect app Parallel Operation Yes — unlimited units IP Rating IP43 Full Rated Output Temperature Up to 40°C ambient Maximum Operating Temperature 55°C (with thermal derating above 40°C) Over-Temperature Protection Yes — with progressive power derating Overload Protection Yes Short Circuit Protection Yes Connector Over-Temperature Protection Yes Compatible With / Goes Well With Primary Applications: 24V vehicle dual battery systems — charging 12V secondary (house/lithium) bank from 24V starter system 4WDs, utes, and expedition vehicles with 24V primary systems and 12V accessory banks Marine vessels — 24V start bank to 12V service bank (isolated, suitable for corrosion-sensitive marine wiring) Off-grid and solar systems with 24V primary bank and 12V secondary loads or battery Caravans and camper trailers connected to 24V tow vehicles Secondary Battery Types: All lead acid chemistries — flooded, AGM, gel Lithium (LiFePO4 and compatible chemistries — confirm profile via VictronConnect app) Parallel Expansion: Unlimited Orion-Tr Smart 24/12-20A units in parallel for higher combined output (40A, 60A, etc.) Accessories: Victron ASS070300100 Remote Cable (required if BMS remote on/off is referenced to secondary battery — see separate listing) Victron SmartShunt or BMV-712 (secondary battery monitoring) Victron Cerbo GX (full system integration via VE.Direct or VE.Can — confirm connectivity) Victron VictronConnect app (free — iOS and Android) Frequently Asked Questions What is the difference between this and a basic non-isolated DC-DC converter? A basic DC-DC converter outputs a fixed voltage — it does not manage charge stages and cannot correctly charge a battery. The Orion-Tr Smart is a true 3-stage charger (Bulk, Absorption, Float) with adaptive algorithms for lead acid and lithium, galvanic isolation between input and output, and smart alternator detection. It charges your secondary battery correctly rather than just applying voltage to it. Why does galvanic isolation matter in a dual battery system? Galvanic isolation fully separates the electrical circuits of the two batteries. In marine applications this prevents stray current corrosion caused by ground loops. In lithium systems it allows the BMS to independently manage the secondary battery without the primary battery interfering. It also protects sensitive lithium cells and BMS electronics from starter battery voltage spikes and noise. Does the Orion-Tr Smart work with smart alternators in modern vehicles? Yes. The built-in engine running detection mechanism monitors whether the alternator is actively supplying power. When the alternator is shut down by the ECU — a normal operating state in fuel-efficiency-optimised vehicles — the Orion-Tr Smart disables itself rather than drawing from the starter battery. This makes it compatible with variable-voltage smart alternators in current-generation vehicles. Can multiple units be run in parallel for higher charging current? Yes. An unlimited number of Orion-Tr Smart 24/12-20A units can be connected in parallel. Each unit operates its own charge algorithm independently — combine two for 40A, three for 60A, and so on. Do I need the ASS070300100 remote cable if I have a lithium BMS? Possibly. If your lithium BMS controls charging by switching the remote on/off signal and that signal is referenced to the secondary (lithium) battery, the ASS070300100 Remote Cable is required for correct integration. If your remote on/off signal is referenced to the primary battery — or you are using a manual switch — the standard remote connector works without the additional cable. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CTEK 12V 25A Marine Battery Charger and Maintainer: Great Choice for the Marine Market and Boats! CTEK M300 is an 8 step, fully automatic primary switch mode battery charger. It is a great choice for the marine market and boats with batteries from 50-500Ah and maintenance of the starter battery with the CTEK M300 STARTER. Unlike old battery chargers, CTEK chargers are designed with a focus on simplicity, safety and flexibility. They will recover the batteries quickly and satisfy the needs and comfort of the boat owner. Fully automatic In addition to normal charging, CTEK M300 offers a fully automatic charging cycle with its patented system for pulse maintenance. CTEK M300 analyses the condition of the battery, charges when necessary and maintains the battery when the boat is not in use. CTEK M300 STARTER offers fully automatic pulse maintenance charging for the starter battery. No harmful galvanic currents Neither the CTEK M300 nor CTEK M300 STARTER produces any harmful galvanic currents that causes corrosion which quickly damages various metal components under the boat, including propellers and ladders. Counteracts sulphation Unused batteries lose their power and their life is shortened through sulfation. It is also more difficult to charge sulfated batteries. The CTEK M300 has a patented method for reconditioning sulfated batteries. The charger analyzes the state of the battery and, if possible, recovers the battery and its power. Recondition the battery  Using CTEK's unique RECOND mode can correct the acid stratification that often occurs in fully discharged batteries. The battery thereby has it is power restored and enjoys an extended service life. Designed for safety CTEK develops all of its battery chargers with safety in mind, for the user, for the battery and for the sensitive electronic equipment installed in all modern boats. CTEK M300 and CTEK M300 STARTER are non-sparking, reverse polarity protected as well as short-circuit-proof and they do no damage to the boat's electronic equipment either. Designed for a tough marine environment CTEK M300 is IP44 classed which means that it is approved for outdoor use. They charge equally well at –20¬∞C as they do at +50¬∞C thanks to the charging voltage being adapted to suit the temperature of the battery, and that the components and cables are of the highest possible quality. CTEK M300 STARTER is IP65 classed and also charges in the same temperature conditions as the CTEK M300. Silent night mode With CTEK M300 there is no need to switch off the charger in order to sleep soundly. The practical and convenient NIGHT mode function now provides silent charging. Complete purchase guaranteed When buying a CTEK M300 there is a guaranteed complete purchase which means there is no need to buy any additional components or accessories. CTEK M300 Specifications: Model 1013 Voltage AC 170–260VAC, 50–60Hz. Charging voltage 14.4V Charging current 25A max. Current, mains 2.9A rms (at full charging current) Back Current Drain* <2Ah per month Current ripple** <4% Ambient temperature -20¬∞C – +50¬∞C Output power is automatically reduced at higher temperatures. Cooling Fan Charger type Eight-step, fully automatic Battery types All types of 12V lead-acid batteries (WET, MF, AGM and GEL). Battery capacity 50–500Ah Protection class IP44 (Outdoor use)*** Weight 1.4kg Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

"Get Connected" with Our Range of Cables, Leads and Adaptors Remember, when Installing a Fuse for The Main Power Cable from The Battery You Should Ensure that It Is as Close to The Battery as Possible and That the Fuse Is of A Rating Based on The Cable Size (not the Amplifier Power). Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Stinger Positive/Negative Battery Terminal 4 Gauge & 8 Gauge Output: Stinger, Recognized Worldwide as The Best Supplier of Quality Car Audio Installation Accessories Stinger SPT53501 PRO Battery Terminal Positive/Negative Battery Terminal (2) 4 Gauge and (1) 8 Gauge Output. Stinger SPT53501 Features: Two 4 Gauge + One 8 Gauge Outputs Corrosion Resistant Shock-Krome Plating Multiple Output Design Works On Positive & Negative Snap On Protective Cover Included Stinger SPT53501 Specification: Colour: Chrome Finish Terminal Size: 2x 4GA + 1x 8GA Legendary Products & Support From Authorized Dealers When you choose Stinger, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Stinger dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Stinger's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Stinger dealer today!

Read more less