A Compact Yet Powerful 2-Channel Amplifier Designed to enhance your in-car audio experience, the powerful GM-A3702 gives you total installation freedom and very low distortion. With a one-body heat sink and gain adjustment of up to 6.5V, you can turn your in-car audio experience into the sound staging environment that you’re looking for. The GM-A3702 offers support for 2 Ohm and 4 Ohm speakers, and can produce up to 500 W of power when bridged. Growing Power, Shrinking SizeNew Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn OnPioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Features: 500 Watts Max Power Automatic signal sensing and Turn-ON Hi-Volt input level control Balanced isolator input circuit Specifications:General RCA Inputs: 2-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 25A x 1 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 246(W) X 60(H) X 180(D) mm Power Continuous Power (RMS) Output @ 1‚Ѷ: N/A Continuous Power (RMS) Output @ 2‚Ѷ: 95W x 2 Continuous Power (RMS) Output @ 4‚Ѷ: 60W x 2 Continuous Power (RMS) Output - Bridged @ 4‚Ѷ: 190W x 1 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: N/A Bass Boost Frequency: 50 Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz Total Harmonic Distortion (THD): <0.05 % Signal-to-Noise (SN) Ratio: >95 dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

This 4-Channel Amplifier Unlocks Your Deepest Desire for Power Give into your deepest desire for power. Work it out how you want with the bridgeable amps. Just consider the consequences whatever you do: pure and clean, distortion-free power. The GM-A6704 will ignite your system, but keep the heat under wraps. These amps are techno wonders and will rumble you to the core. Variable High Pass FiltersVariable HPF (High Pass Filter) allows for adjustable frequency between 40 Hz to 500 Hz* and greater car audio system flexibility according to subwoofer characteristics and personal listening preference. Bass BoostBass Boost featured in the GM-A6704 can be set to levels variably from 0 to 12 dB for optimal bass. This precise control can enhance the overall balance and impact of all sounds according to listening preference and music style. Growing Power, Shrinking SizeNew Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn OnPioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Pioneer GM-A6704 Features: 1000 Watts Max Power Automatic signal sensing and Turn-ON Variable high pass filter Adjustable bass boost Pioneer GM-A6704 Specifications: General RCA Inputs: 4-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 25A x 2 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 356(W) X 60(H) X 215(D) mm Power Continuous Power (RMS) Output @ 1Ω: N/A Continuous Power (RMS) Output @ 2Ω: 95W x 4 Continuous Power (RMS) Output @ 4Ω: 60W x 4 Continuous Power (RMS) Output - Bridged @ 4Ω: 190W x 2 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: 40-500 Hz Bass Boost Frequency: 50Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz (+0dB , -3dB) Total Harmonic Distortion (THD): <0.05% ( 10W, 1kHz) Signal-to-Noise (SN) Ratio: > 95dB Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Amplify Your Audio Experience with the New Class-D Amplifier! The Pioneer GM-D9705 is your ‚Äúall-in-one‚Äù solution when looking for additional power. With a compact footprint, speaker line input (and signal sensing turn-on), remote bass control all powered by a ‚ÄúClass-D‚Äù amplifier you have the power in your hands! Packs a PunchThe 5-channel amplifier is rated at 2000 watts max with the A and B channels rated at 75 watts x 4 (RMS) and the subwoofer output rated at 600 watts at 2 (RMS). Compared to similarly priced multichannel amplifiers, the variable crossover networks on the GM-D9705 offer increased flexibility and give listeners more control. Block terminals for a cleaner installation and direct wire contact minimizing resistance. Variable Low Pass FilterFor extra flexibility, a variable LPF makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The LPF is adjustable from 40 Hz to 240 Hz.Turn Up the BassThe GM-D9705 also features a Bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics. Speaker Level InputsWhat, you DON'T own a Pioneer head unit? Well, we won't hold it against you. In fact we'll even help you build onto your system. Speaker level inputs allow simplify integration into existing aftermarket or factory installed (OEM) integrated entertainment systems so you can connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle. Improved Circuit DesignTo prevent circuit shutdown, Pioneer's new digital amplifier circuit ‚ÄúProtection Control System‚Äù senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Œ© connection. This design enhances the flexibility to connect multiple subwoofers to a system.   Features: 2,000 Watts Max Power Block Terminal Variable High Pass and Low Pass Filters Equipped with A/B-SW Input Select Specifications: General RCA Inputs: 5-CH Amplifier Class: CLASS-D Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 30A x 3 Bass Boost Remote: Yes Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 200 mV to 6.5 V Terminal Type: Block Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 302mm (W) x 60mm (H) x 215mm (D) Power Continuous Power (RMS) Output @ 1‚Ѷ: N/A Continuous Power (RMS) Output @ 2‚Ѷ: 100W x 4 (Main channel), 600W x 1 (Subwoofer channel) Continuous Power (RMS) Output @ 4‚Ѷ: 75W x 4 (Main channel), 350W x 1 (Subwoofer channel) Continuous Power (RMS) Output - Bridged @ 4‚Ѷ: 200W x 2 (Main channel), 350W x 1 (Subwoofer channel) Audio Adjustments Low-Pass Crossover Frequency: 40 Hz Low-Pass Slope (dB/octave): -12dB/oct (A/B CH) / -12dB/-24dB (SUB CH) High-Pass Crossover Frequency: 500 Hz Bass Boost Frequency: 50 Hz Bass Boost Level: 0 dB to 18 dB Audio Specifications Frequency Response: A/B CH: 10 Hz ~ 50 kHz (+0dB, -3dB) / SUB CH: 10Hz ~ 500 Hz (+0dB, -3dB) Total Harmonic Distortion (THD): A/B CH: <0.05% (1kHz) / SUB CH: <0.05% (100Hz) Signal-to-Noise (SN) Ratio: > 94dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Rockford Fosgate R2-300X4 Prime 300 Watt 4-Channel Class D Amplifier When four speakers need real power without compromise, the R2-300X4 delivers 300 watts of clean, efficient Class D performance engineered by Rockford Fosgate. Product Overview The R2-300X4 is part of Rockford Fosgate's 3rd generation Prime Series, built for car audio enthusiasts who demand reliable, high-performance amplification at an accessible price. Operating as a full-range Class D 4-channel amplifier, it runs at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, giving it the flexibility to drive front and rear speaker pairs or reconfigure as a 3-channel or 2-channel setup. Class D topology maximises efficiency and reduces the electrical load on the vehicle's charging system, while MEHSA 4 (Maximum Efficiency Heat Sink Application) actively reduces MOSFET temperatures, lowers distortion, and prolongs output device lifespan. The top-mounted control panel provides independent front and rear controls within easy reach, and CTA-2006 compliant power ratings confirm that the 300W output is a real, tested figure. Designed and engineered in Tempe, Arizona, the R2-300X4 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red for both front and rear) to accurately match the source unit's output to the amplifier's input sensitivity, eliminating guesswork and reducing distortion at the source. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. MEHSA 4 (Maximum Efficiency Heat Sink Application): An advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's outputs and protects against shorting speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. Fully Adjustable Butterworth Crossovers: Independent front and rear 12 dB/octave High-Pass and Low-Pass crossovers, continuously variable from 50 to 250 Hz, with an All-Pass option per channel for full-range output when no filtering is needed. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V) through a 2/4 Channel Input Selection Switch, making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing downstream amplifiers to be added without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-300X4 Series Prime Number of Channels 4 Amplifier Class Class D, Full Range Total RMS Power 300W RMS Power @ 4 Ohm 50W x 4 RMS Power @ 2 Ohm 75W x 4 Bridged Power @ 4 Ohm 150W x 2 Dynamic Power @ 4 Ohm 70W x 4 Dynamic Power @ 2 Ohm 115W x 4 Dynamic Power Bridged @ 4 Ohm 230W x 2 Bridgeable Yes Minimum Impedance (Stereo) 2 Ohm Minimum Impedance (Bridged) 4 Ohm Frequency Response 20 Hz - 20 kHz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input (Front) 4 x RCA low-level, 4-Pin Molex high-level Signal Input (Rear) 4 x RCA low-level, 4-Pin Molex high-level Input Switch 2/4 Channel (RCA and high-level compatible) Signal Output 2 x RCA pass-through (active with RCA or high-level input) Crossover (Front and Rear) High-Pass / Low-Pass: 50-250 Hz @ 12 dB/octave Butterworth All-Pass Yes Tone Controls No Remote Controls No Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT Front (Blue/Red), C.L.E.A.N. OUT Rear (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 39A Recommended Fuse 60A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 10.1" (4.9 cm x 17.3 cm x 25.5 cm) Weight 4.75 lbs (2.15 kg) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-300X4 pairs naturally with Rockford Fosgate Prime Series full-range speakers such as the R165X3, R168X2, R169X2, and R169X3 for a matched front and rear speaker setup. For systems requiring low-end support, the rear channels bridge cleanly to drive a single Prime R1 subwoofer such as the R1S410 or R1S412, with the rear crossover set to Low-Pass. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for speaker outputs. A quality 4-channel RCA interconnect is recommended for clean signal transfer from the head unit. Frequently Asked Questions Can the R2-300X4 be used to power both speakers and a subwoofer in the same system? Yes. The R2-300X4 supports 3-channel configuration, where the front channels power a pair of full-range speakers and the rear channels are bridged to drive a single subwoofer. Setting the rear crossover to Low-Pass rolls off high frequencies to the sub. The minimum impedance of any bridged channel is 4 ohms, so confirm subwoofer impedance before bridging. Does the R2-300X4 require a remote turn-on wire? When using RCA inputs, a remote turn-on wire must be connected to the head unit's remote output. When using high-level speaker inputs, the Auto-Sense bypass switch can be enabled to allow the amplifier to detect an incoming signal and power on automatically, making it compatible with factory head units and systems that lack a dedicated remote output, including those with Retained Accessory Power (RAP). What does the NOMAD protection system do? NOMAD is a real-time analogue computer built into the R2-300X4 that continuously monitors the amplifier's speaker outputs. It protects the amplifier from damage caused by shorted speaker wires and dangerously low speaker impedances, providing active, dynamic protection rather than relying solely on a fuse. What gauge power, ground, and speaker wire does the R2-300X4 require? Rockford Fosgate specifies 4 AWG for power and ground runs using the included compression terminal block connectors. Speaker output connections use 8 AWG wire. The recommended 60A fuse is not included in the box and must be sourced separately, installed as close to the battery as possible. Can the R2-300X4 be bridged into a 2-ohm load for maximum power? No. When bridging the R2-300X4, the minimum supported impedance per bridged output is 4 ohms. Running a bridged channel into a 2-ohm load is not supported and risks amplifier failure or NOMAD-triggered protection shutdown. In standard stereo mode, the minimum impedance per channel is 2 ohms.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

A Combination of Great Design and Massive Power The GM-A4704 amplifier gives you total installation freedom and no distortion. With a one-body heat sink and gain adjustment of up to 6.5V, you can turn your in-car audio experience into the sound staging environment that you’re looking for. This 4-channel amp allows you to drive multiple speakers and subwoofers, it’s also bridgeable to power a single sub. Variable High Pass Filter Variable HPF (high pass filter) allow for adjustable frequency from 40 Hz to 500 Hz* and greater car audio system flexibility according to subwoofer characteristics and personal listening preference. Growing Power, Shrinking Size New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn On Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Pioneer GM-A4704 Specifications: General RCA Inputs: 4-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 30A x 1 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 326(W) X 60(H) X 215(D) mm Power Continuous Power (RMS) Output @ 1Ω: N/A Continuous Power (RMS) Output @ 2Ω: 65W x 4 Continuous Power (RMS) Output @ 4Ω: 40W x 4 Continuous Power (RMS) Output - Bridged @ 4Ω: 130W x 2 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: 40 Hz to 500 Hz Bass Boost Frequency: 50Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz (+0dB , -3dB) Total Harmonic Distortion (THD): <0.05% ( 10W, 1kHz) Signal-to-Noise (SN) Ratio: > 94dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!  

Read more less

8-Channel Car Amplifier with Digital Signal Processing from JBL!The JBL Audio DSP4086 is one of the best ways to get superior sound fidelity in your car. JBL's incredibly compact DSP4086 8-channel amp/processor will do both, providing eight channels of 40 watts RMS while sculpting the sound with powerful tuning software using your Windows PC.Connecting to the whole systemThe DSP4086 was designed to take the signals from your vehicle's front speakers, rear speakers, front center channel, and rear subwoofer. You can then process those signals to create eight powered outputs, and you have the ability to power and control your front tweeters.TuningEvery channel features 31-band EQ, switchable from parametric to graphic; completely variable high-, low-, and band-pass filters with selectable slopes; time delay, up to 12ms in 0.2ms increments; and 0/180¬∞ phase adjustment. You can assign each input to an output, and you can sum signals in order to create a full-range signal to be processed.Features: 8-channel car amplifier with digital signal processing 40 watts RMS x 8 at 4 ohms 60 watts RMS x 8 at 2 ohms DSP and EQ tuning tool adjustments made via USB connection to a Windows PC Save up to 10 presets Inputs: 6 assignable preamp and speaker-level (RCA adapters included) Outputs: 8 powered and processed Adjustment Details 31-band EQ (selectable parametric or graphic) Adjustable high-, low-, and band-pass filters (20-20,000 Hz) Selectable filter slopes 6, 12, 18, 24, 30, 36, 42, 48 dB/octave) Adjustable delay: 0 to 12ms in 0.2ms increments Phase adjustment: 0 or 180¬∞ Programming done by a Windows-run PC Other Features Includes wired remote for ch 7/8 Fuse rating: 40A x 1 Wiring and hardware not included with amplifier 8-gauge power and ground leads recommended Dimensions: 5-11/16‚Ä≥W x 2‚Ä≥H x 9-3/8‚Ä≥D What's in the Box: 8-Channel DSP amplifier w/ attached 6‚Ä≥ 6-RCA input harness Remote bass level control 16.5‚Ä≤ Remote level control cable (RJ-12 connectors both ends) 8‚Ä≥ Power/ground/Rem harness (inline 40A ATO fuse) 8‚Ä≥ 16-Pin speaker output harness 70‚Ä≥ USB Cable (type-A both ends / 2.0) 6 Input adapters (RCA to set-screw) Spare 40A ATO fuse Four 15mm screws Two 10mm screws 4 Large flat-washers 4 Small flat-washers 4 Lock-washers Four 6-1/2‚Ä≥ wire ties Owner's manual (Eng/Span/Fren/Others) Legendary Products & Support From Authorized Dealers When you choose JBL, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JBL dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JBL's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JBL dealer today!

Read more less

Excellent For OEM Systems Upgrade!   D-Class 4-Channel AmplifierThe Hertz DPower4 Car Audio Amplifier is an ultra-compact to ensure effortless installations in the increasingly narrow spaces of modern vehicles or in the factory amp area. The efficient D Class circuit delivers 600W of maximum power within a compact chassis, an essential requirement for in-car integration. The versatile crossover filter of the DPower 4 enables the user to create a front-rear or front + subwoofer system by connecting two channels in bridge mode. The double speaker & RCA inputs allows the DPower4 to connect to any type of source, be it OEM or aftermarket. For an excellent integration with OEM systems the DPower4 is equipped with a smart automated turn on and off circuit according to the factory radio. Legendary Products & Support From Authorized Dealers When you choose HERTZ, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized HERTZ dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by HERTZ's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized HERTZ dealer today!

Read more less

Rockford Fosgate R2-500X4 Prime 500 Watt 4-Channel Full-Range Class-D Car Amplifier A 500W 4-channel Full-Range Class-D car amplifier delivering 125W x 4 at 2-ohm or 250W x 2 at 4-ohm bridged (CTA-2006 rated). Features independent front and rear channel crossover control with all-pass mode, 2/4 channel input selection switch, RCA pass-through outputs, C.L.E.A.N. gain calibration with per-channel output clip indicators, Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management. Designed and engineered in Tempe, Arizona. Backed by a 1 year warranty. Product Overview The Rockford Fosgate R2-500X4 is a 500W 4-channel Full-Range Class-D car amplifier from the Prime R2 series, purpose-built for powering car speaker pairs across the full audio spectrum. Rated continuous power is 75W x 4 at 4-ohm, 125W x 4 at 2-ohm, or 250W x 2 at 4-ohm bridged (CTA-2006, less than 1.0% THD+N). Dynamic power via PowerCube reaches 90W x 4 at 4-ohm, 160W x 4 at 2-ohm, and 300W x 2 at 4-ohm bridged. The R2-500X4 provides independent front and rear channel crossover control, each with fully adjustable high-pass and low-pass filters at 12dB/octave Butterworth (50Hz-250Hz) and an all-pass mode for full-bandwidth output. Independent front and rear variable input gain adjustment is provided. A 2/4 channel input selection switch configures the amplifier for source units with either 2 or 4 RCA outputs, working for both RCA and high-level inputs. RCA pass-through outputs allow downstream amplifier chaining - the R2-750X1 monoblock subwoofer amplifier is the natural companion for a complete car audio system. Auto-Sense turn-on activates the amplifier when a speaker-level signal is detected, with a RAP bypass switch for Retained Accessory Power systems. C.L.E.A.N. provides separate input and output clip indicators for both front and rear channel groups. Rollback Protection, NOMAD speaker protection, and MEHSA4 heat management are all active. Cast aluminium heatsink with convection cooling. Designed and engineered in Tempe, Arizona. Features & Benefits Full-Range Class-D - Efficient 4-Channel Car Audio Amplification: Full-Range Class-D topology delivers high-efficiency power across the complete 20Hz-20kHz audio spectrum, reducing current demand on the vehicle's electrical system while powering speaker pairs with clean, accurate output. Independent Front and Rear Crossover Control with All-Pass Mode: Front and rear channels each have independent high-pass and low-pass crossover controls at 12dB/octave Butterworth (50Hz-250Hz) plus an all-pass mode for full-bandwidth output, giving more flexibility than a single shared crossover. 2/4 Channel Input Selection Switch: The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel RCA or high-level input, working with source units that have limited RCA output pairs without requiring Y-cables or signal splitting. Bridgeable to 2-Channel - 250W Mono per Pair: The R2-500X4 can be bridged to 2-channel, delivering 250W x 2 at 4-ohm (300W dynamic), suited to driving higher-power speaker pairs or running a compact 2-channel installation. RCA Pass-Through Outputs for Downstream Chaining: RCA pass-through outputs are active with both RCA and high-level input, allowing the signal to be passed to a downstream subwoofer amplifier such as the R2-750X1 without signal degradation. C.L.E.A.N. Technology - Independent Per-Channel Clip Monitoring: C.L.E.A.N. provides separate input and output clip indicator LEDs for both the front and rear channel groups, enabling accurate independent gain calibration across all four channels. Auto-Sense Turn-On with RAP Bypass: Auto-Sense activates the amplifier automatically when a high-level input signal is detected, removing the need for a dedicated remote turn-on wire. A bypass switch is included for vehicles with Retained Accessory Power systems. Rollback Protection and NOMAD Speaker Protection: Rollback Protection dynamically manages output to prevent thermal stress during sustained high-output conditions. NOMAD provides real-time protection against shorted speaker wires and dangerously low impedances. Technical Specs Specification Detail SKU R2-500X4 Number of Channels 4 Total Power 500W Rated Power - 4-ohm (CTA-2006, less than 1.0% THD+N) 75W x 4 Rated Power - 2-ohm (CTA-2006, less than 1.0% THD+N) 125W x 4 Rated Power - 4-ohm Bridged (CTA-2006) 250W x 2 Dynamic Power - 4-ohm (PowerCube) 90W x 4 Dynamic Power - 2-ohm (PowerCube) 160W x 4 Dynamic Power - 4-ohm Bridged (PowerCube) 300W x 2 Circuit Topology Full-Range Class-D Bridgeable Yes Frequency Response 20 Hz - 20 kHz THD + Noise Less than 1.0% at 4-ohm and 2-ohm Input Sensitivity Low-Level: 150mV - 4V / High-Level: 450mV - 12V Signal Input Front: 4 x RCA + 4-Pin Molex / Rear: 4 x RCA + 4-Pin Molex Input Selection 2/4 Channel Switch (RCA and High-Level) Signal Output 2 x RCA Pass-Thru (active with RCA or High-Level input) Tone Controls None Front High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Front Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear High-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth Rear Low-Pass Crossover 50 Hz - 250 Hz at 12dB/Octave Butterworth All-Pass Yes Remote Controls None Auto-Sense Turn-On Yes (with RAP bypass switch) Power Wire Gauge 4 AWG Power Input Connector Compression Terminal Block Speaker Wire Gauge 8 AWG Speaker Output Connector Compression Terminal Block Cooling Convection Heatsink Cast Aluminium Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 80A Max Current Draw at 13.8V Sinewave 59A Visual Indicators Power: Blue / Protect: Red / C.L.E.A.N. In: Red / C.L.E.A.N. Out Front and Rear: Blue/Red Dimensions (H x W x D) 49 x 173 x 255mm (1.9 x 6.8 x 10.1 inch) CTA-2006 Compliant Yes Warranty 1 Year Compatible With / Goes Well With The R2-500X4 suits car audio builds requiring an efficient 4-channel full-range amplifier for speaker pairs at the Prime R2 price point. At 59A maximum current draw and an 80A fuse requirement, it places moderate demand on the vehicle's electrical system. The RCA pass-through output pairs naturally with the R2-750X1 mono subwoofer amplifier for a complete R2 series speaker and subwoofer system. Goes Well With: R2-750X1 - Companion R2 series 750W mono subwoofer amplifier, chainable via the R2-500X4's RCA pass-through outputs for a complete R2 series car audio system R2-750X5 - Alternative single-unit 5-channel R2 series amplifier for builds requiring an integrated subwoofer channel alongside speaker amplification R2-2X12 / R2-2X10 - Rockford Fosgate Prime dual loaded subwoofer enclosures when paired with the R2-750X1 companion monoblock RFK4 - Rockford Fosgate 4 AWG amplifier wiring kit to complete the installation Frequently Asked Questions What is the difference between the R2-500X4 and the R2-750X5? The R2-500X4 is a 4-channel full-range amplifier rated at 125W x 4 at 2-ohm with no dedicated subwoofer channel, no Punch EQ, and no remote level control. The R2-750X5 is a 5-channel amplifier rated at 100W x 4 plus 350W subwoofer at 2-ohm, adding a dedicated subwoofer channel with Punch EQ, infrasonic filter, RLC remote level control, and a 2/4/5 channel input switch. Choose the R2-500X4 for a pure 4-channel speaker amplifier and pair it with the R2-750X1 for subwoofer duty; choose the R2-750X5 for a single-unit 5-channel solution. Can I add a subwoofer amplifier to a system using the R2-500X4? Yes. The R2-500X4 includes RCA pass-through outputs that are active with both RCA and high-level input, allowing a distortion-free signal to be passed to a downstream mono subwoofer amplifier such as the R2-750X1. The two amplifiers chain together cleanly for a complete 4-channel speaker plus mono subwoofer car audio system. What does the 2/4 channel input selection switch do? The input selection switch configures the R2-500X4 to accept either a 2-channel or 4-channel input from the source unit, working for both RCA and high-level connections. In 2-channel mode, the single stereo RCA pair feeds all four channels internally. In 4-channel mode, separate front and rear RCA pairs are used for independent left/right front and rear channel control. What fuse does the R2-500X4 require and is it included? The R2-500X4 requires an 80A fuse, which is not included and must be sourced separately. This is smaller than the 120A fuse required by the R2-750X5 and R2-750X1, reflecting the R2-500X4's lower maximum current draw of 59A. Install the fuse as close to the battery as possible in the 4 AWG power supply line. Does the R2-500X4 need a dedicated remote turn-on wire? Not necessarily. Auto-Sense activates the amplifier automatically when a high-level speaker signal is detected at the input, removing the need for a separate remote wire in OEM integration scenarios. A RAP bypass switch is included for vehicles where the source unit continues to output a signal after the ignition is switched off.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less