Stinger SPXULEDR 2-Pod Red CREE LED Rock and Underbody Lights IP68 9W Per Pod 120 Degree Die-Cast Aluminium 12V DC Off-Road Use Only The Stinger SPXULEDR is a 2-pod red CREE LED rock and underbody light set from the Stinger SPX Powersports range. Each pod houses 3 red CREE LEDs delivering 9W output at a 120-degree beam angle, in an IP68-rated die-cast aluminium housing. Waterproof, dustproof, and rated for continuous water immersion. Rubber mounting pads and hardware included for flat and tubular surface mounting. 12V DC only. For off-road use only, not road-legal in Australia. Product overview The SPXULEDR is built for the demands of genuine off-road environments. IP68 rating provides complete dustproof protection and resistance to continuous water immersion, suited to river crossings, heavy rain, mud, and extreme off-road water exposure. Die-cast aluminium housing resists impact, vibration, and heat while keeping the pods compact and lightweight. Three CREE LEDs per pod deliver 9W of focused red light across a 120-degree beam angle for underbody, wheel well, engine bay, and interior lighting applications. Rubber mounting pads allow installation on flat and tubular surfaces including roll cage tubing, bash bars, and curved panels. Mounting hardware for both pods is included in the box. Operating voltage is 12V DC only. Not compatible with 24V systems. The working temperature range is -20°C to +40°C. For off-road use only. Red underbody and rock lights are not road-legal for use on public roads in Australia. CE and RoHS certified. Features and benefits IP68 waterproof and dustproof housing: Completely dustproof and protected against continuous water immersion — suited to river crossings, mud, heavy rain, and extreme off-road conditions. 3x CREE LEDs per pod, 9W, 120-degree beam: Focused red output with a wide beam angle for underbody and wheel well illumination. Die-cast aluminium housing: Resists impact, vibration, and heat in demanding off-road environments. Flat and tubular surface mounting: Rubber mounting pads support installation on both flat panels and tubular surfaces including roll cages and bash bars. Complete mounting kit included: 2 rubber mounting pads and 4 pieces of mounting hardware supplied for both pods. CE and RoHS certified: Meets international electrical safety and environmental standards. 12V DC only: Not compatible with 24V systems. Off-road use only: Not road-legal for use on public roads in Australia. What's in the box 2x Red CREE LED Pods 2x Rubber Mounting Pads 4x Mounting Hardware Pieces Technical specs Specification Detail SKU SPXULEDR Brand Stinger LED Colour Red LED Type CREE LED Count 3x per pod LED Power 9W per pod Beam Angle 120 degrees IP Rating IP68 Housing Material Die-cast aluminium Housing Colour Black Operating Voltage 12V DC only Working Temperature -20°C to +40°C Dimensions (per pod) 70mm (L) x 35mm (W) x 10mm (H) Certifications CE, RoHS Quantity 2 pods Includes 2x pods, 2x rubber mounting pads, 4x mounting hardware Application Off-road use only Frequently asked questions Is the SPXULEDR road-legal in Australia? No. The SPXULEDR is for off-road use only. Red underbody and rock lights are not road-legal for use on public roads in Australia. Use is restricted to off-road environments. What does IP68 mean for these pods? IP68 is the highest common IP ingress protection rating, indicating the pods are completely dustproof and protected against continuous water immersion beyond 1 metre depth. This suits river crossings, heavy rain, mud, and extreme off-road water exposure. How many pods are included? The SPXULEDR includes 2 LED pods, 2 rubber mounting pads, and 4 pieces of mounting hardware for both pods. Can the SPXULEDR be mounted on tubular surfaces like roll cages or bash bars? Yes. The rubber mounting pads support installation on both flat and tubular surfaces, including roll cage tubing, bash bars, and other curved surfaces. What voltage do the SPXULEDR pods require? The SPXULEDR operates on 12V DC only. It is not compatible with 24V electrical systems. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger SPXDW4 4 Foot Dynamic RGB Whip Light 360 Degree LEDs IP65 Quick Release Silicone for Off-Road ATV UTV ENLIGHT10 and HEIGH10 Compatible The Stinger SPXDW4 is a 4-foot (approximately 1.2m) dynamic RGB whip light from the ENLIGHT10 SPXD range, featuring 360-degree dynamic RGB LEDs, IP65 silicone coating, and a quick-release mounting system for off-road vehicles, ATVs, UTVs, and powersports applications. HEIGH10 compatible and controllable via the Stinger enLIGHT10 smartphone app. An ENLIGHT10 RGB module is required and not included the SPXDBTC Bluetooth controller is available separately, or is included with the SPXDK4 and SPXDK8 rock light kits. Includes extension harness and installation hardware. Product overview The SPXDW4 delivers 360-degree dynamic RGB illumination with fully customisable colour patterns and brightness via the Stinger enLIGHT10 app (SPXDBTC Bluetooth controller required, sold separately) or the HEIGH10 infotainment system (SE-SXMHAR harness required, sold separately, with the HEIGH10 running the latest firmware). IP65 silicone coating provides waterproof, shockproof, and dust-proof protection against water, mud, sand, dirt, and debris in genuine off-road and powersports conditions. Watertight connectors are used throughout the harness run, maintaining IP65-level protection from the light to the connection point. The quick-release mounting system allows the whip to be detached in seconds without tools for transport, storage, or when not required for a particular trip. An ENLIGHT10 RGB module is required for operation and is not included in the box. The SPXDBTC Bluetooth controller is the standalone option sold separately. Alternatively, the SPXDK4 and SPXDK8 rock light kits both include an RGB module if a combined system is being built. Features and benefits 360-degree dynamic RGB LEDs: Full 360-degree illumination with customisable dynamic colour patterns and brightness. IP65 silicone coating: Waterproof, shockproof, and dust-proof protection for water, mud, sand, dirt, and debris in off-road and powersports environments. Quick-release mounting system: Detaches in seconds without tools for easy removal during transport, storage, or when not in use. Watertight connectors: Maintains IP65-level protection through the full harness run. HEIGH10 compatible: Integrates with the Stinger HEIGH10 infotainment system via the SE-SXMHAR harness (sold separately). Stinger enLIGHT10 app control: Full colour, pattern, and brightness control via the enLIGHT10 smartphone app when paired with the SPXDBTC Bluetooth controller (sold separately). Extension harness and installation hardware included: Reduces additional parts needed for installation. ENLIGHT10 RGB module required: Not included. The SPXDBTC Bluetooth controller is available separately, or is included with the SPXDK4 and SPXDK8 rock light kits. What's in the box 4ft Dynamic RGB Whip Light Extension Harness Installation Hardware ENLIGHT10 RGB module not included. Technical specs Specification Detail SKU SPXDW4 Brand Stinger Whip Length 4ft (approx. 1.2m) LED Type Dynamic RGB LED Coverage 360 degrees Weather Rating IP65 Coating Silicone Quick-Release Yes Connectors Watertight ENLIGHT10 RGB Module Required, not included HEIGH10 Compatible Yes App Control Yes, Stinger enLIGHT10 app (SPXDBTC required) Includes 4ft RGB whip, extension harness, installation hardware Compatible with The SPXDW4 works within the Stinger ENLIGHT10 ecosystem. An ENLIGHT10 RGB module is required for operation. Compatible control options: SPXDBTC Bluetooth controller (sold separately) or SPXDK4/SPXDK8 rock light kits (each include an RGB module). HEIGH10 integration requires the SE-SXMHAR harness (sold separately) and the HEIGH10 running the latest firmware. Frequently asked questions Does the SPXDW4 include the RGB controller module? No. An ENLIGHT10 RGB module is required and is not included. The SPXDBTC Bluetooth controller is available separately, or is included with the SPXDK4 and SPXDK8 rock light kits if building a combined system. What is the IP rating of the SPXDW4? The SPXDW4 carries an IP65 rating, providing protection against water jets, heavy dust, mud, sand, and debris for genuine off-road and powersports use. How does the quick-release system work? The quick-release mounting system allows the whip to be detached from its mount in seconds without tools, suited to removing it for transport, storage, or when it is not required for a particular trip. Can the SPXDW4 be controlled from a Stinger HEIGH10 head unit? Yes. The SPXDW4 is HEIGH10 compatible. Connection requires the SE-SXMHAR ENLIGHT10 harness (sold separately) and the HEIGH10 running the latest firmware. What is included in the box? The box includes the 4ft dynamic RGB whip, an extension harness, and installation hardware. The ENLIGHT10 RGB module is not included and must be sourced separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns, our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself, is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Light Up Every Angle ENLIGHT10 4-Pod Dynamic RGB Rock Light Kit With Bluetooth App, RF Remote and HEIGH10 Integration Product Overview The Stinger SPXDK4 is a 4-pod dynamic RGB rock light kit from the ENLIGHT10 SPXD range, designed for wheel well, underbody, and bull bar lighting. Each pod houses 24 LEDs for maximum illumination output, with fully customisable colour patterns and dynamic modes controlled via the Stinger enLIGHT10 smartphone app or the included RF remote. The kit is HEIGH10-compatible, enabling direct lighting control from the head unit's interface where a HEIGH10 infotainment system is installed. The pods feature durable aluminium housings with rugged watertight connections, engineered for the water, mud, dust, and debris conditions of off-road and powersports applications. Mounting hardware for both flat surfaces and bull bars is included. The daisy chain connection system allows additional SPXD pods to be added to the same setup, and 10-foot extension harnesses are included for larger vehicles. Crucially, the SPXDK4 includes the SPXDBTC Bluetooth controller and RF remote the RGB controller module is in the box. No separate controller purchase is required. Key Specifications Manufacturer Part Number: SPXDK4 Configuration: 4-pod dynamic RGB rock light kit LEDs per pod: 24 LED type: Dynamic RGB Bluetooth controller: SPXDBTC — included RF remote: Included App control: Stinger enLIGHT10 app (iOS/Android — confirm platform support) HEIGH10 compatible: Yes (via SE-SXMHAR harness — sold separately) Expandable: Yes — daisy chain connection for additional SPXD pods Extension harnesses: 4x 10-foot (included) Housing material: Aluminium Connectors: Watertight Mounting: Flat surface pads and bull bar pads (both included) Weather resistance: Rated for water, dirt, dust, and debris Features & Benefits 24 LEDs Per Pod — Each rock light pod contains 24 RGB LEDs for high-output, vivid illumination of wheel wells, underbody panels, and bull bar mounting points. Bluetooth App Control — Full colour, pattern, and brightness control via the Stinger enLIGHT10 smartphone app using the included SPXDBTC Bluetooth controller. RF Remote Included — The included RF remote provides wireless lighting control without a smartphone, for quick on-the-go adjustments. HEIGH10 Compatible — Integrates with the Stinger HEIGH10 infotainment system via the SE-SXMHAR harness (sold separately) for in-dash lighting control alongside audio and navigation. Expandable Daisy Chain — The daisy chain connection system allows additional SPXD pods to be connected to the same controller, expanding the lighting setup without additional controllers. 10-Foot Extension Harnesses Included — Four 10-foot extension cables are included, providing reach for larger vehicles and flexible pod placement across the underbody and wheel wells. Dual Mounting Options — Flat rubber mounting pads and bull bar rubber pads are both included, supporting installation on flat underbody panels and tubular bull bar surfaces without additional hardware. Durable Aluminium Housing with Watertight Connectors — Aluminium pod housings resist impact and vibration, while watertight connectors maintain protection in all off-road conditions. SPXDBTC Controller Included — Unlike some SPXD lighting products that require a separately purchased controller, the SPXDK4 includes the SPXDBTC in the box — a complete, ready-to-run kit. Technical Specs Specification Detail Part Number SPXDK4 Brand Stinger Configuration 4-pod dynamic RGB rock light kit LEDs Per Pod 24 LED Type Dynamic RGB Bluetooth Controller SPXDBTC — included RF Remote Included App Control Stinger enLIGHT10 app HEIGH10 Compatible Yes — SE-SXMHAR harness required (sold separately) Expandable Yes — daisy chain for additional SPXD pods Extension Harnesses 4x 10ft — included Housing Material Aluminium Connectors Watertight Mounting Options Flat surface pads + bull bar pads (both included) Weather Rating Rated for water, dirt, dust, debris Compatible With / Goes Well With Stinger enLIGHT10 smartphone app (iOS/Android — confirm current platform support) Stinger HEIGH10 infotainment system (via SE-SXMHAR harness — sold separately) Additional Stinger ENLIGHT10 SPXD pods via daisy chain (sold separately) Stinger SPXYADP Y adapter harness (sold separately) Off-road vehicles, 4WDs, ATVs, UTVs, Jeeps, trucks, and powersports vehicles Bull bar and flat-surface underbody mounting Frequently Asked Questions Does the SPXDK4 include the Bluetooth controller? Yes — the SPXDBTC Bluetooth controller and RF remote are both included in the SPXDK4 kit. No separate controller purchase is required. How many LEDs are in each rock light pod? Each pod contains 24 RGB LEDs, providing high-output vivid illumination across the full colour spectrum. Can I add more pods to the SPXDK4 setup later? Yes — the SPXDK4 uses a daisy chain connection system, allowing additional SPXD rock light pods (sold separately) to be connected to the same SPXDBTC controller without needing additional controllers. Is the SPXDK4 compatible with the Stinger HEIGH10 head unit? Yes — the SPXDK4 is HEIGH10 compatible. Integration requires the SE-SXMHAR replacement harness (sold separately) and the HEIGH10 unit running the latest firmware. What mounting options are included? The kit includes four flat rubber mounting pads for underbody and panel surfaces and four bull bar rubber pads for tubular mounting surfaces — both types are in the box, covering the most common installation scenarios. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less