Heavy-Duty 2,000 Amp Jump Starter Built for the Biggest Engines on Australian Roads Product Overview The Hulk 4x4 HU6511 is a high-capacity lithium-ion jump starter designed to handle serious engine sizes petrol up to 10.0L and diesel up to 7.0L making it one of the most capable portable jump starters for 4WDs, heavy utes, trucks, and large-displacement vehicles. Its 18,000mAh battery delivers a 2,000A peak current and 1,200A starting current, with enough reserve to power devices and charge laptops and phones between uses. Beyond starting your vehicle, the HU6511 functions as a multi-output portable power station with dual USB ports, DC outputs across 12V, 16V, and 19V, and a 240V AC charger included in the kit. The unit also features a multi-mode LED flashlight with solid, SOS, and strobe functions, and ships in an EVA protective carry case with everything needed to charge, clamp, and get moving. Features & Benefits 2,000A peak / 1,200A starting current — rated to start petrol engines up to 10.0L and diesel engines up to 7.0L, covering the biggest rigs, 4WDs, and commercial vehicles you're likely to encounter on Australian roads Spark-proof, reverse polarity clamps — safer connection under the bonnet, especially in low light or awkward engine bays Multi-voltage DC output (12V / 16V / 19V) — powers or charges laptops and other DC devices in the field without needing mains power 240V AC charger, car charger adaptor, and 4-in-1 USB cable included — covers nearly every charging scenario from home to remote Laptop adaptor harness included — makes this a genuinely useful touring and work tool beyond jump-starting Multi-function LED display — shows charge level and current levels at a glance before attempting a start Multi-mode LED flashlight (solid/SOS/strobe) — useful for roadside breakdowns, camp use, or emergencies Black and grey rubberised housing — built for rough storage in ute trays, toolboxes, and under seats EVA protective carry case — keeps the unit, clamps, and cables organised and protected Technical Specs Specification Detail Battery type Lithium-ion Battery capacity 18,000mAh Starting current 1,200A Peak current 2,000A Charging time 5–6 hours Input 18V 1.5A (USB) USB output 5V 2.1A DC output 12V / 16V / 19V at 3.5A DC outlets 12V 4A and 19V 3.5A Dual USB ports Yes Cycle life 1,000+ cycles at 80% depth of discharge Operating temperature -20°C to +60°C Dimensions 193mm (L) x 116mm (W) x 40mm (H) Protections Reverse polarity, short circuit, over-discharge, overheat Warranty 1 year Compatible With / Goes Well With Petrol vehicles up to 10.0L engine capacity Diesel vehicles up to 7.0L engine capacity Laptops and DC-powered devices via 12V/16V/19V outputs and included laptop adaptor harness USB and USB-C chargeable devices (phones, tablets, cameras) 4WD, truck, and touring setups requiring high-current emergency starting capability Weight 2.22kg (shipping weight including packaging) Frequently Asked Questions Will this start a large diesel 4WD or truck? Yes — it's rated for diesel engines up to 7.0L and petrol up to 10.0L, making it suitable for most heavy 4WDs, utes, and light commercial vehicles. Can I charge my laptop with this unit? Yes, it includes a laptop adaptor harness and DC outputs at 12V, 16V, and 19V (3.5A), covering most laptop charging requirements without needing mains power. What charging accessories are included? The kit includes a 240V AC charger, a car charger adaptor, a 4-in-1 USB charging cable, spark-proof clamps, and an EVA protective carry case. How long does the unit take to fully charge? Expect 5–6 hours from flat to full charge using the included 240V AC charger or car charger adaptor. Is the HU6511 safe to use if I connect the clamps incorrectly? Yes — the clamps are spark-proof with reverse polarity protection, and the unit includes short circuit, over-discharge, and overheat protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA AXDG200 Shark Fin Antenna DAB+ AM FM and GPS All-in-One A sleek low-profile shark fin all-in-one antenna combining DAB+ digital radio, AM/FM radio, and GPS reception in a single aerodynamic housing, the DNA AXDG200 provides 5-metre cables with SMB female connectors for DAB+ and GPS and a Motorola male connector for AM/FM, with 20dB DAB gain, 28dB GPS gain, and roof mount installation. Product Overview The DNA AXDG200 is a compact all-in-one shark fin antenna integrating DAB+ digital radio, AM/FM radio, and GPS functionality into a single low-profile housing. The aerodynamic shark fin design reduces wind resistance and provides a modern factory-style finish suited to virtually any vehicle. DAB+ covers 170-240MHz and 1452-1492MHz with 20±3dB gain; AM/FM covers 520-1710kHz and 87.5-108MHz with AM gain of 2±5dB and FM gain of 15±2dB; GPS covers 1575.42±1.023MHz with 28±3dB gain. Each of the four cable outputs is 5 metres in length. DAB+ and GPS use SMB female connectors and AM/FM uses a Motorola male connector. A separate 5-metre power cable is also provided. The unit measures 118mm long by 76mm wide by 62mm high and mounts to the vehicle roof via a 14.5 x 14.5mm square or 18.8mm diameter cutout. Features & Benefits All-in-One DAB+, AM/FM, and GPS in a Single Housing: The AXDG200 combines DAB+ digital radio, AM/FM radio, and GPS reception into a single compact shark fin housing, eliminating the need for multiple external antennas and providing a clean, factory-style vehicle appearance. Aerodynamic Shark Fin Design: The shark fin profile reduces wind resistance and aerodynamic noise compared to traditional whip-style antennas, while providing a modern low-profile appearance that complements the styling of virtually any vehicle. DAB+ Digital Radio Reception (170-240MHz and 1452-1492MHz): The AXDG200 supports the full DAB+ frequency range used in Australia with 20±3dB gain, providing reliable digital radio reception for compatible head units as DAB+ coverage continues to expand. AM/FM Radio Reception with Active Amplification: AM/FM coverage spans 520-1710kHz and 87.5-108MHz with active amplification of 2±5dB AM and 15±2dB FM, maintaining or improving AM/FM reception compared to standard passive antennas. GPS Reception (1575.42MHz): The integrated GPS antenna provides 28±3dB gain at the standard GPS L1 frequency of 1575.42MHz, suited to aftermarket navigation head units and GPS-enabled devices. 5-Metre Cable Lengths on All Outputs: All four cable outputs (DAB+, GPS, AM/FM, and power) are 5 metres in length, providing sufficient reach for routing from the roof mounting point to the head unit or GPS device in most passenger vehicles. SMB Female Connectors for DAB+ and GPS: The DAB+ and GPS outputs use SMB female connectors, compatible with the majority of aftermarket head units and GPS devices with DAB+ and GPS antenna inputs. Motorola Male Connector for AM/FM: The AM/FM output uses a standard Motorola male connector, compatible with the vast majority of aftermarket head units with a standard DIN antenna input. Low-Profile Roof Mount: The AXDG200 mounts to the vehicle roof via a 14.5 x 14.5mm square or 18.8mm diameter hole, providing a permanent and weatherproof installation. Technical Specs Specification Detail SKU AXDG200 Brand DNA Antenna Type Shark Fin All-in-One Functions DAB+, AM/FM, GPS DAB+ Frequency 170-240MHz, 1452-1492MHz AM/FM Frequency 520-1710kHz, 87.5-108MHz GPS Frequency 1575.42 ± 1.023MHz DAB+ Gain 20 ± 3dB AM Gain 2 ± 5dB FM Gain 15 ± 2dB GPS Gain 28 ± 3dB DAB+ Cable Length 5 metres GPS Cable Length 5 metres AM/FM Cable Length 5 metres Power Cable Length 5 metres DAB+ Connector SMB Female GPS Connector SMB Female AM/FM Connector Motorola Male Dimensions 118mm L x 76mm W x 62mm H Roof Mount Cutout 14.5 x 14.5mm (square) or 18.8mm diameter Compatible With The AXDG200 is compatible with aftermarket head units and GPS devices with DAB+ (SMB female), GPS (SMB female), and AM/FM (Motorola/DIN) antenna inputs. The 5-metre cable lengths suit most passenger vehicle roof-to-head-unit routing distances. Confirm the antenna connector types required by your specific head unit and GPS device before purchase. Frequently Asked Questions Does the AXDG200 support DAB+ digital radio in Australia? Yes. The AXDG200 covers the full DAB+ frequency bands used in Australia (170-240MHz and 1452-1492MHz) with 20±3dB gain, providing reliable digital radio reception for compatible aftermarket head units. What connectors does the AXDG200 use? The AXDG200 has SMB female connectors for DAB+ and GPS outputs, and a standard Motorola male connector for the AM/FM output. Confirm the connector types required by your specific head unit and GPS device before purchase. Does the AXDG200 replace the factory antenna? Yes. The AXDG200 is designed to replace the factory antenna with a single all-in-one unit that covers DAB+, AM/FM, and GPS. The AM/FM Motorola male connector connects directly to the aftermarket head unit's standard antenna input. What size hole is required to mount the AXDG200? The AXDG200 requires a 14.5 x 14.5mm square or 18.8mm diameter hole in the vehicle roof for installation. Confirm the mounting requirements against your vehicle's roof panel before installation. How long are the cables on the AXDG200? All four cable outputs (DAB+, GPS, AM/FM, and power) are 5 metres in length, providing sufficient reach for routing from the roof mounting point to the head unit or GPS device in most passenger vehicles.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GME XRS-375C4P XRS Connect 4WD Pack 5W UHF CB Radio A complete 4WD UHF CB radio pack built around the GME XRS-375C, the XRS-375C4P includes a 5W super compact fixed mount UHF CB radio with Bluetooth audio and data, built-in GPS, Scansuite digital scanning, XRS Connect smartphone application, and a professional-grade IP67 speaker microphone, supplied with a 2.1dBi heavy-duty radome antenna, mounting bracket, and all installation accessories. Product Overview The GME XRS-375C4P is a complete 4WD UHF CB radio installation pack featuring the GME XRS-375C UHF CB radio. The XRS-375C is a 5W super compact fixed mount UHF radio with an anti-glare colour TFT LCD screen, Bluetooth wireless technology for both audio and data, a built-in GPS receiver for location-aware functionality, and Scansuite digital scanning technology. Multiple user-customisable buttons allow the radio to be configured for the operator's specific workflow and preferences. The XRS Connect smartphone application provides Voice Playback, Active Mute, Crewtalk, and Location Services functionality when paired with a compatible smartphone. Noise Reduction Technology improves received audio clarity in high-noise environments and the 3W front-facing microphone speaker provides clear audio output within the vehicle cabin. Automatic Power Down and User Updatable Firmware support long-term reliability and feature development. The radio is rated to MIL-STD 810H for vibration, shock, temperature, and humidity, and accepts 12/24V power input. The XRS-375C4P pack includes the XRS-375C radio, professional-grade IP67-rated MC670B speaker microphone, MB207 magnetic microphone mounting bracket, LE040 microphone extension lead, AD008 microphone extension adaptor kit, LE125 12V DC power lead, AE4704B 2.1dBi heavy-duty radome antenna, mounting bracket, and mounting hardware. Features & Benefits 5W Super Compact Fixed Mount UHF CB Radio: The XRS-375C delivers 5W of transmit power in a super compact fixed mount chassis, providing full UHF CB output in a form factor suited to tight mounting locations across 4WD and off-road vehicle dashboards and consoles. Professional-Grade IP67 Speaker Microphone (MC670B): The included MC670B speaker microphone carries an IP67 waterproof and dustproof rating, providing reliable operation in dusty, wet, and demanding off-road conditions encountered in 4WD touring and work environments. 3W Front-Facing Microphone Speaker: The integrated 3W front-facing speaker provides clear audio output within the vehicle cabin for received transmissions and XRS Connect application audio playback. Anti-Glare Colour TFT LCD Screen: The anti-glare colour TFT LCD screen provides clear channel and status information in direct sunlight and bright ambient light conditions, suited to 4WD and outdoor vehicle use. Scansuite Digital Scanning Technology: Scansuite provides flexible and configurable channel scanning across multiple user-defined channel groups, enabling the operator to monitor multiple channels simultaneously with priority and lockout configurations. Multiple User-Customisable Buttons: Multiple buttons on the XRS-375C can be assigned to user-preferred functions, allowing the radio to be configured for the specific workflow and communication requirements of the operator. Bluetooth Audio and Data: Bluetooth wireless technology provides both audio streaming and data connectivity between the XRS-375C and a paired smartphone, enabling XRS Connect application integration and wireless audio routing. Built-In GPS Receiver - Location Aware: The integrated GPS receiver provides location data for use with XRS Connect Location Services, enabling location sharing and awareness features through the smartphone application. XRS Connect Smartphone Application: The XRS Connect app provides Voice Playback of received transmissions on the smartphone, Active Mute for suppressing unwanted transmissions, Crewtalk for group communication coordination, and Location Services for real-time location sharing between XRS Connect users. Noise Reduction Technology: Integrated noise reduction processing improves received audio intelligibility in high-noise environments including off-road and highway driving conditions. MIL-STD 810H Rated: The XRS-375C is tested and rated to MIL-STD 810H for vibration, shock, temperature, and humidity, confirming its suitability for demanding off-road and work vehicle environments. 12/24V Power Input: The XRS-375C accepts both 12V and 24V DC power input, making it compatible with passenger 4WDs, light commercial vehicles, and heavy commercial vehicles without requiring a voltage adaptor. 2.1dBi Heavy-Duty Radome Antenna (AE4704B) Included: The included AE4704B 2.1dBi heavy-duty radome antenna provides a complete antenna solution for the 4WD pack without requiring a separate antenna purchase. Five-Year Warranty: The XRS-375C4P is backed by a five-year GME warranty. Technical Specs Specification Detail SKU XRS-375C4P Brand GME Type Fixed Mount UHF CB Radio Transmit Power 5W Screen Anti-Glare Colour TFT LCD Bluetooth Yes (Audio and Data) GPS Built-In Receiver Scanning Scansuite Digital Scanning Noise Reduction Yes Automatic Power Down Yes Firmware User Updatable Power Input 12/24V DC MIL-STD Rating MIL-STD 810H (Vibration, Shock, Temperature, Humidity) Speaker Microphone MC670B (IP67 rated) Microphone Speaker Output 3W Antenna AE4704B 2.1dBi Heavy-Duty Radome XRS Connect App Yes (Voice Playback, Active Mute, Crewtalk, Location Services) Warranty Five Years What's in the Box XRS Connect UHF CB Radio (XRS-375C) Professional-Grade Speaker Microphone (MC670B) Magnetic Microphone Mounting Bracket (MB207) Microphone Extension Lead (LE040) Microphone Extension Adaptor Kit (AD008) 12V DC Power Lead (LE125) 2.1dBi Heavy-Duty Radome Antenna (AE4704B) Mounting Bracket Mounting Hardware Compatible With The XRS-375C4P is compatible with 12V and 24V DC vehicle electrical systems. The XRS Connect smartphone application is compatible with paired Bluetooth-enabled iOS and Android smartphones. The built-in GPS receiver supports Location Services through the XRS Connect application. Confirm XRS Connect application compatibility with your specific smartphone operating system version before purchase. Frequently Asked Questions What is XRS Connect and what does it do? XRS Connect is GME's smartphone application that pairs with the XRS-375C via Bluetooth to provide Voice Playback of received UHF transmissions on the smartphone, Active Mute to suppress unwanted transmissions, Crewtalk for group communication coordination, and Location Services for real-time location sharing between XRS Connect users. Is the speaker microphone in the XRS-375C4P waterproof? Yes. The included MC670B speaker microphone carries an IP67 waterproof and dustproof rating, providing reliable operation in wet, dusty, and demanding off-road conditions. Does the XRS-375C4P include an antenna? Yes. The AE4704B 2.1dBi heavy-duty radome antenna is included in the XRS-375C4P 4WD pack alongside all mounting hardware and installation accessories. Is the XRS-375C compatible with 24V vehicles? Yes. The XRS-375C accepts both 12V and 24V DC power input, making it compatible with both 12V passenger 4WDs and 24V commercial vehicles using the included LE125 12V DC power lead or a compatible 24V power lead. What does the MIL-STD 810H rating mean for the XRS-375C? MIL-STD 810H is a US military standard for environmental testing covering vibration, shock, temperature extremes, and humidity. A radio rated to MIL-STD 810H has been tested and confirmed to operate reliably under these demanding conditions, confirming its suitability for 4WD, off-road, and work vehicle environments.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GME XRS-335COB XRS Connect Outback Pack 5W UHF CB Radio A complete Outback UHF CB radio installation pack built around the GME XRS-335C, the XRS-335COB includes a 5W super compact fixed mount UHF CB radio with Bluetooth audio and data, built-in GPS, Scansuite digital scanning, XRS Connect smartphone application, and a professional-grade IP67 speaker microphone, supplied with a 2.1dBi medium-duty radome antenna, mounting bracket, and all installation accessories. Product Overview The GME XRS-335COB is a complete Outback UHF CB radio installation pack featuring the GME XRS-335C UHF CB radio. The XRS-335C is a 5W super compact fixed mount UHF radio with an anti-glare colour TFT LCD screen, Bluetooth wireless technology for both audio and data, a built-in GPS receiver for location-aware functionality, and Scansuite digital scanning technology. Multiple user-customisable buttons allow the radio to be configured for the operator's specific workflow and preferences. The XRS Connect smartphone application provides Voice Playback, Active Mute, Crewtalk, and Location Services functionality when paired with a compatible smartphone. Noise Reduction Technology improves received audio clarity in high-noise environments and the 3W front-facing microphone speaker provides clear audio output within the vehicle cabin. Automatic Power Down and User Updatable Firmware support long-term reliability and feature development. The XRS-335COB pack includes the XRS-335C radio, professional-grade IP67-rated MC670B speaker microphone, MB207 magnetic microphone mounting bracket, LE040 microphone extension lead, AD008 microphone extension adaptor kit, LE125 12V DC power lead, AE4707B 2.1dBi medium-duty radome antenna, mounting bracket, and mounting hardware. Features & Benefits 5W Super Compact Fixed Mount UHF CB Radio: The XRS-335C delivers 5W of transmit power in a super compact fixed mount chassis, providing full UHF CB output in a form factor suited to tight mounting locations across 4WD and off-road vehicle dashboards and consoles. Professional-Grade IP67 Speaker Microphone (MC670B): The included MC670B speaker microphone carries an IP67 waterproof and dustproof rating, providing reliable operation in dusty, wet, and demanding outback conditions. 3W Front-Facing Microphone Speaker: The integrated 3W front-facing speaker provides clear audio output within the vehicle cabin for received transmissions and XRS Connect application audio playback. Anti-Glare Colour TFT LCD Screen: The anti-glare colour TFT LCD screen provides clear channel and status information in direct sunlight and bright ambient light conditions suited to outback and 4WD vehicle use. Scansuite Digital Scanning Technology: Scansuite provides flexible and configurable channel scanning across multiple user-defined channel groups, enabling the operator to monitor multiple channels simultaneously with priority and lockout configurations. Multiple User-Customisable Buttons: Multiple buttons on the XRS-335C can be assigned to user-preferred functions, allowing the radio to be configured for the specific workflow and communication requirements of the operator. Bluetooth Audio and Data: Bluetooth wireless technology provides both audio streaming and data connectivity between the XRS-335C and a paired smartphone, enabling XRS Connect application integration and wireless audio routing. Built-In GPS Receiver - Location Aware: The integrated GPS receiver provides location data for use with XRS Connect Location Services, enabling location sharing and awareness features through the smartphone application. XRS Connect Smartphone Application: The XRS Connect app provides Voice Playback of received transmissions on the smartphone, Active Mute for suppressing unwanted transmissions, Crewtalk for group communication coordination, and Location Services for real-time location sharing between XRS Connect users. Noise Reduction Technology: Integrated noise reduction processing improves received audio intelligibility in high-noise environments including outback and highway driving conditions. Automatic Power Down: Automatic Power Down reduces battery drain when the radio is not in active use, extending vehicle battery life during extended outback and remote area travel. User Updatable Firmware: Firmware updates keep the XRS-335C current with new features and improvements over the product's service life. 2.1dBi Medium-Duty Radome Antenna (AE4707B) Included: The included AE4707B 2.1dBi medium-duty radome antenna provides a complete antenna solution for the Outback pack without requiring a separate antenna purchase. Five-Year Warranty: The XRS-335COB is backed by a five-year GME warranty. Technical Specs Specification Detail SKU XRS-335COB Brand GME Type Fixed Mount UHF CB Radio Transmit Power 5W Screen Anti-Glare Colour TFT LCD Bluetooth Yes (Audio and Data) GPS Built-In Receiver Scanning Scansuite Digital Scanning Noise Reduction Yes Automatic Power Down Yes Firmware User Updatable Speaker Microphone MC670B (IP67 Rated) Microphone Speaker Output 3W Antenna AE4707B 2.1dBi Medium-Duty Radome XRS Connect App Yes (Voice Playback, Active Mute, Crewtalk, Location Services) Warranty Five Years What's in the Box XRS Connect UHF Radio (XRS-335C) Professional-Grade Speaker Microphone (MC670B) Magnetic Microphone Mounting Bracket (MB207) Microphone Extension Lead (LE040) Microphone Extension Adaptor Kit (AD008) 12V DC Power Lead (LE125) 2.1dBi Medium-Duty Radome Antenna (AE4707B) Mounting Bracket Mounting Hardware Compatible With The XRS-335COB is compatible with 12V DC vehicle electrical systems via the included LE125 power lead. The XRS Connect smartphone application is compatible with paired Bluetooth-enabled iOS and Android smartphones. The built-in GPS receiver supports Location Services through the XRS Connect application. Confirm XRS Connect application compatibility with your specific smartphone operating system version before purchase. Frequently Asked Questions What is the difference between the XRS-335COB Outback Pack and the XRS-375C4P 4WD Pack? Both packs are built around GME XRS Connect UHF CB radios with the same core features including Bluetooth, built-in GPS, Scansuite, IP67 speaker microphone, and XRS Connect app. The key difference is the antenna: the XRS-335COB Outback Pack includes the AE4707B 2.1dBi medium-duty radome antenna, while the XRS-375C4P 4WD Pack includes the AE4704B 2.1dBi heavy-duty radome antenna. The radio models also differ (XRS-335C vs XRS-375C). Confirm the specific features and specifications of each radio model before purchase. What is XRS Connect and what does it do? XRS Connect is GME's smartphone application that pairs with the XRS-335C via Bluetooth to provide Voice Playback of received UHF transmissions on the smartphone, Active Mute to suppress unwanted transmissions, Crewtalk for group communication coordination, and Location Services for real-time location sharing between XRS Connect users. Is the speaker microphone in the XRS-335COB waterproof? Yes. The included MC670B speaker microphone carries an IP67 waterproof and dustproof rating, providing reliable operation in wet, dusty, and demanding outback and off-road conditions. Does the XRS-335COB include an antenna? Yes. The AE4707B 2.1dBi medium-duty radome antenna is included in the XRS-335COB Outback Pack alongside all mounting hardware and installation accessories. Can the XRS-335C firmware be updated by the user? Yes. The XRS-335C supports user-updatable firmware, allowing the radio to be updated with new features and improvements over its service life.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GME XRS-335CTP XRS Connect Touring Pack 5W UHF CB Radio A complete Touring UHF CB radio installation pack built around the GME XRS-335C, the XRS-335CTP includes a 5W super compact fixed mount UHF CB radio with Bluetooth audio and data, built-in GPS, Scansuite digital scanning, XRS Connect smartphone application, and a professional-grade IP67 speaker microphone, supplied with a 6.6dBi elevated feed antenna, mounting bracket, and all installation accessories. Product Overview The GME XRS-335CTP is a complete Touring UHF CB radio installation pack featuring the GME XRS-335C UHF CB radio. The XRS-335C is a 5W super compact fixed mount UHF radio with an anti-glare colour TFT LCD screen, Bluetooth wireless technology for both audio and data, a built-in GPS receiver for location-aware functionality, and Scansuite digital scanning technology. Multiple user-customisable buttons allow the radio to be configured for the operator's specific workflow and preferences. The XRS Connect smartphone application provides Voice Playback, Active Mute, Crewtalk, and Location Services functionality when paired with a compatible smartphone. Noise Reduction Technology improves received audio clarity in high-noise environments and the 3W front-facing microphone speaker provides clear audio output within the vehicle cabin. Automatic Power Down and User Updatable Firmware support long-term reliability and feature development. The XRS-335CTP pack includes the XRS-335C radio, professional-grade IP67-rated MC670B speaker microphone, MB207 magnetic microphone mounting bracket, LE040 microphone extension lead, AD008 microphone extension adaptor kit, LE125 12V DC power lead, AE4018BK1 6.6dBi elevated feed antenna, mounting bracket, and mounting hardware. Features & Benefits 5W Super Compact Fixed Mount UHF CB Radio: The XRS-335C delivers 5W of transmit power in a super compact fixed mount chassis, providing full UHF CB output in a form factor suited to tight mounting locations across touring and 4WD vehicle dashboards and consoles. Professional-Grade IP67 Speaker Microphone (MC670B): The included MC670B speaker microphone carries an IP67 waterproof and dustproof rating, providing reliable operation in dusty, wet, and demanding touring conditions. 3W Front-Facing Microphone Speaker: The integrated 3W front-facing speaker provides clear audio output within the vehicle cabin for received transmissions and XRS Connect application audio playback. Anti-Glare Colour TFT LCD Screen: The anti-glare colour TFT LCD screen provides clear channel and status information in direct sunlight and bright ambient light conditions suited to touring and 4WD vehicle use. Scansuite Digital Scanning Technology: Scansuite provides flexible and configurable channel scanning across multiple user-defined channel groups, enabling the operator to monitor multiple channels simultaneously with priority and lockout configurations. Multiple User-Customisable Buttons: Multiple buttons on the XRS-335C can be assigned to user-preferred functions, allowing the radio to be configured for the specific workflow and communication requirements of the operator. Bluetooth Audio and Data: Bluetooth wireless technology provides both audio streaming and data connectivity between the XRS-335C and a paired smartphone, enabling XRS Connect application integration and wireless audio routing. Built-In GPS Receiver - Location Aware: The integrated GPS receiver provides location data for use with XRS Connect Location Services, enabling location sharing and awareness features through the smartphone application. XRS Connect Smartphone Application: The XRS Connect app provides Voice Playback of received transmissions on the smartphone, Active Mute for suppressing unwanted transmissions, Crewtalk for group communication coordination, and Location Services for real-time location sharing between XRS Connect users. Noise Reduction Technology: Integrated noise reduction processing improves received audio intelligibility in high-noise environments including touring and highway driving conditions. Automatic Power Down: Automatic Power Down reduces battery drain when the radio is not in active use, extending vehicle battery life during extended touring travel. User Updatable Firmware: Firmware updates keep the XRS-335C current with new features and improvements over the product's service life. 6.6dBi Elevated Feed Antenna (AE4018BK1) Included: The XRS-335CTP Touring Pack is supplied with the AE4018BK1 6.6dBi elevated feed antenna, providing higher gain than the radome antennas included in the Outback and 4WD packs for extended range performance suited to touring on open roads and highways. Five-Year Warranty: The XRS-335CTP is backed by a five-year GME warranty. Technical Specs Specification Detail SKU XRS-335CTP Brand GME Type Fixed Mount UHF CB Radio Transmit Power 5W Screen Anti-Glare Colour TFT LCD Bluetooth Yes (Audio and Data) GPS Built-In Receiver Scanning Scansuite Digital Scanning Noise Reduction Yes Automatic Power Down Yes Firmware User Updatable Speaker Microphone MC670B (IP67 Rated) Microphone Speaker Output 3W Antenna AE4018BK1 6.6dBi Elevated Feed XRS Connect App Yes (Voice Playback, Active Mute, Crewtalk, Location Services) Warranty Five Years What's in the Box XRS Connect UHF Radio (XRS-335C) Professional-Grade Speaker Microphone (MC670B) Magnetic Microphone Mounting Bracket (MB207) Microphone Extension Lead (LE040) Microphone Extension Adaptor Kit (AD008) 12V DC Power Lead (LE125) 6.6dBi Elevated Feed Antenna (AE4018BK1) Mounting Bracket Mounting Hardware Compatible With The XRS-335CTP is compatible with 12V DC vehicle electrical systems via the included LE125 power lead. The XRS Connect smartphone application is compatible with paired Bluetooth-enabled iOS and Android smartphones. The built-in GPS receiver supports Location Services through the XRS Connect application. Confirm XRS Connect application compatibility with your specific smartphone operating system version before purchase. Frequently Asked Questions What is the difference between the XRS-335CTP Touring Pack and the XRS-335COB Outback Pack? Both packs are built around the same GME XRS-335C radio with identical core features. The key difference is the antenna: the XRS-335CTP Touring Pack includes the AE4018BK1 6.6dBi elevated feed antenna for extended range performance on open roads and highways, while the XRS-335COB Outback Pack includes the AE4707B 2.1dBi medium-duty radome antenna suited to off-road and outback environments. Choose based on the primary use case and antenna mounting preference. What is XRS Connect and what does it do? XRS Connect is GME's smartphone application that pairs with the XRS-335C via Bluetooth to provide Voice Playback of received UHF transmissions on the smartphone, Active Mute to suppress unwanted transmissions, Crewtalk for group communication coordination, and Location Services for real-time location sharing between XRS Connect users. Is the speaker microphone in the XRS-335CTP waterproof? Yes. The included MC670B speaker microphone carries an IP67 waterproof and dustproof rating, providing reliable operation in wet, dusty, and demanding touring conditions. Does the XRS-335CTP include an antenna? Yes. The AE4018BK1 6.6dBi elevated feed antenna is included in the XRS-335CTP Touring Pack alongside all mounting hardware and installation accessories. Can the XRS-335C firmware be updated by the user? Yes. The XRS-335C supports user-updatable firmware, allowing the radio to be updated with new features and improvements over its service life.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB24 Bonnet Mount UHF Antenna Bracket Toyota Landcruiser 300 Series An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Landcruiser 300 Series (2021-on), the APVCBB24 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB24 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Landcruiser 300 Series 2021-On Specific Design: The APVCBB24 is engineered specifically for the Toyota Landcruiser 300 Series from 2021 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB24 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Toyota Landcruiser 300 Series. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB24 is Australian designed and engineered for the specific requirements of the Toyota Landcruiser 300 Series platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB24 Brand Aerpro Compatible Vehicles Toyota Landcruiser 300 Series, 2021-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB24 is designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific LC300 variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB24 require drilling or vehicle modification? No. The APVCBB24 mounts to the passenger side bonnet hinge using the Toyota Landcruiser 300 Series existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB24 affect bonnet operation or window wipers? No. The APVCBB24 is designed specifically for the Toyota Landcruiser 300 Series bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB24 accept? The APVCBB24 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB24 compatible with the earlier Toyota Landcruiser 200 Series? No. The APVCBB24 is designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards. Owners of the Landcruiser 200 Series should refer to the APVCBB5 (bonnet hinge mount) or APVCBB18 (mirror mount) instead. Is an antenna included with the APVCBB24? No. The APVCBB24 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB6 Bonnet Mount UHF Antenna Bracket Ford Ranger and Everest An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Ford Ranger PX, PX2, and PX3 (2012-2021) and Everest UA and UA II (2015-2022), the APVCBB6 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB6 is a bonnet mount UHF antenna bracket designed specifically for the Ford Ranger PX, PX2, and PX3 from 2012-2021 and the Ford Everest UA and UA II from 2015-2022, covering all model variants including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Ford Ranger PX PX2 PX3 and Everest UA UA II Specific Design: The APVCBB6 is engineered specifically for the Ford Ranger PX, PX2, and PX3 from 2012-2021 and the Everest UA and UA II from 2015-2022, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Suits All Model Variants: The APVCBB6 is compatible with all model variants of the Ford Ranger and Everest across the supported date range, including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB6 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Ford Ranger and Everest across all variants. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB6 is Australian designed and engineered for the specific requirements of the Ford Ranger and Everest platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB6 Brand Aerpro Compatible Vehicles Ford Ranger PX 2012-2021, Ford Ranger PX2 2012-2021, Ford Ranger PX3 2012-2021, Ford Everest UA 2015-2022, Ford Everest UA II 2015-2022 Compatible Variants Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, XLT Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB6 is designed specifically for the Ford Ranger PX, PX2, and PX3 from 2012-2021 and the Ford Everest UA and UA II from 2015-2022, across all model variants including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Ranger or Everest variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB6 require drilling or vehicle modification? No. The APVCBB6 mounts to the passenger side bonnet hinge using the Ford Ranger and Everest's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Is the APVCBB6 compatible with all Ford Ranger and Everest variants including the Raptor? Yes. The APVCBB6 is confirmed compatible with all model variants across the supported Ford Ranger PX, PX2, and PX3 (2012-2021) and Everest UA and UA II (2015-2022) date ranges, including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. Will the APVCBB6 affect bonnet operation or window wipers? No. The APVCBB6 is designed specifically for the Ford Ranger and Everest bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB6 accept? The APVCBB6 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread. This covers the majority of UHF CB antenna brands available in the Australian market. Is an antenna included with the APVCBB6? No. The APVCBB6 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB5 Bonnet Mount UHF Antenna Bracket Toyota Landcruiser 200 Series An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Landcruiser 200 Series (2016-2021), excluding GX models, the APVCBB5 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB5 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Landcruiser 200 Series from 2016-2021, excluding GX models. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Landcruiser 200 Series 2016-2021 Specific Design - Excluding GX Models: The APVCBB5 is engineered specifically for the Toyota Landcruiser 200 Series from 2016-2021, ensuring a precise fit to the passenger side bonnet hinge. This bracket does not suit GX models; confirm your specific variant before purchase. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB5 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Landcruiser 200 Series. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB5 is Australian designed and engineered for the specific requirements of the Toyota Landcruiser 200 Series platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB5 Brand Aerpro Compatible Vehicles Toyota Landcruiser 200 Series, 2016-2021 (excludes GX models) Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Important Note Does not suit GX models Compatible With The APVCBB5 is designed specifically for the Toyota Landcruiser 200 Series from 2016-2021, excluding GX models. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Landcruiser 200 Series variant and build date against the Aerpro vehicle fitment guide before purchase. This bracket does not suit GX models. Frequently Asked Questions Does the APVCBB5 suit all Toyota Landcruiser 200 Series variants? No. The APVCBB5 suits the Toyota Landcruiser 200 Series from 2016-2021 but does not suit GX models. Confirm your specific variant before purchase. Does the APVCBB5 require drilling or vehicle modification? No. The APVCBB5 mounts to the passenger side bonnet hinge using the Landcruiser 200 Series existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB5 affect bonnet operation or window wipers? No. The APVCBB5 is designed specifically for the Landcruiser 200 Series bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB5 accept? The APVCBB5 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is an antenna included with the APVCBB5? No. The APVCBB5 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB1 Bonnet Mount UHF Antenna Bracket Isuzu D-Max and MU-X An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Isuzu D-Max (2012-2020) and MU-X (2013-2021), the APVCBB1 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB1 is a bonnet mount UHF antenna bracket designed specifically for the Isuzu D-Max from 2012-2020 and the MU-X from 2013-2021. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Isuzu D-Max 2012-2020 and MU-X 2013-2021 Specific Design: The APVCBB1 is engineered specifically for the Isuzu D-Max from 2012-2020 and the MU-X from 2013-2021, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB1 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Isuzu D-Max and MU-X. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB1 is Australian designed and engineered for the specific requirements of the Isuzu D-Max and MU-X platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB1 Brand Aerpro Compatible Vehicles Isuzu D-Max 2012-2020, Isuzu MU-X 2013-2021 Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB1 is designed specifically for the Isuzu D-Max from 2012-2020 and the MU-X from 2013-2021, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific D-Max or MU-X variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB1 require drilling or vehicle modification? No. The APVCBB1 mounts to the passenger side bonnet hinge using the Isuzu D-Max and MU-X existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB1 affect bonnet operation or window wipers? No. The APVCBB1 is designed specifically for the Isuzu D-Max and MU-X bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB1 accept? The APVCBB1 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB1 compatible with both the D-Max and MU-X? Yes. The APVCBB1 is confirmed compatible with both the Isuzu D-Max from 2012-2020 and the MU-X from 2013-2021. Is an antenna included with the APVCBB1? No. The APVCBB1 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB4 Bonnet Mount UHF Antenna Bracket Toyota Hilux and Fortuner An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Hilux and Fortuner (2015-on), the APVCBB4 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB4 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Hilux and Fortuner from 2015 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Hilux and Fortuner 2015-On Specific Design: The APVCBB4 is engineered specifically for the Toyota Hilux and Fortuner from 2015 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB4 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Toyota Hilux and Fortuner. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB4 is Australian designed and engineered for the specific requirements of the Toyota Hilux and Fortuner platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB4 Brand Aerpro Compatible Vehicles Toyota Hilux 2015-On, Toyota Fortuner 2015-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB4 is designed specifically for the Toyota Hilux and Fortuner from 2015 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Hilux or Fortuner variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB4 require drilling or vehicle modification? No. The APVCBB4 mounts to the passenger side bonnet hinge using the Toyota Hilux and Fortuner's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB4 affect bonnet operation or window wipers? No. The APVCBB4 is designed specifically for the Toyota Hilux and Fortuner bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB4 accept? The APVCBB4 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB4 compatible with both the Hilux and Fortuner? Yes. The APVCBB4 is confirmed compatible with both the Toyota Hilux and Fortuner from 2015 onwards. Is an antenna included with the APVCBB4? No. The APVCBB4 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB7 Bonnet Mount UHF Antenna Bracket Mitsubishi Triton MR A vehicle-specific bonnet hinge UHF antenna bracket for the Mitsubishi Triton MR (2019-2023), the APVCBB7 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB7 is a bonnet mount UHF antenna bracket designed specifically for the Mitsubishi Triton MR from 2019-2023. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Mitsubishi Triton MR 2019-2023 Specific Design: The APVCBB7 is engineered specifically for the Mitsubishi Triton MR from 2019-2023, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB7 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Mitsubishi Triton MR. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Technical Specs Specification Detail SKU APVCBB7 Brand Aerpro Compatible Vehicles Mitsubishi Triton MR, 2019-2023 Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Inclusions Bracket Compatible With The APVCBB7 is designed specifically for the Mitsubishi Triton MR from 2019-2023, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Triton MR variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB7 require drilling or vehicle modification? No. The APVCBB7 mounts to the passenger side bonnet hinge using the Mitsubishi Triton MR's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB7 affect bonnet operation or window wipers? No. The APVCBB7 is designed specifically for the Mitsubishi Triton MR bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB7 accept? The APVCBB7 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB7 compatible with earlier Triton generations? No. The APVCBB7 is designed specifically for the Mitsubishi Triton MR from 2019-2023. Earlier Triton generations use a different bonnet hinge profile and require a different bracket. Confirm your specific variant and build date before purchase. Is an antenna included with the APVCBB7? No. The APVCBB7 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB3 Bonnet Mount UHF Antenna Bracket GWM Ute Cannon An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the GWM Ute Cannon (2020-on), the APVCBB3 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB3 is a bonnet mount UHF antenna bracket designed specifically for the GWM Ute Cannon from 2020 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits GWM Ute Cannon 2020-On Specific Design: The APVCBB3 is engineered specifically for the GWM Ute Cannon from 2020 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB3 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the GWM Ute Cannon. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB3 is Australian designed and engineered for the specific requirements of the GWM Ute Cannon platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB3 Brand Aerpro Compatible Vehicles GWM Ute Cannon, 2020-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB3 is designed specifically for the GWM Ute Cannon from 2020 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific GWM Ute Cannon variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB3 require drilling or vehicle modification? No. The APVCBB3 mounts to the passenger side bonnet hinge using the GWM Ute Cannon's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB3 affect bonnet operation or window wipers? No. The APVCBB3 is designed specifically for the GWM Ute Cannon bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB3 accept? The APVCBB3 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB3 compatible with all GWM Ute Cannon variants from 2020 onwards? The APVCBB3 is designed for the GWM Ute Cannon from 2020 onwards. Confirm your specific variant and build date against the Aerpro vehicle fitment guide before purchase. Is an antenna included with the APVCBB3? No. The APVCBB3 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less