Garmin 010-02466-00 PowerSwitch Digital Switch Box 6-Output Bluetooth 12V A compact Bluetooth digital switch box providing centralised wireless control of up to six 12V vehicle accessories from a compatible Garmin navigator or smartphone app, the Garmin 010-02466-00 PowerSwitch delivers six switch outputs at up to 30 amps each, IPX7 weather resistance, and in-dash connectivity via Apple CarPlay and Android Auto. Product Overview The Garmin 010-02466-00 PowerSwitch is a digital switch box that replaces traditional manual switch panels with wireless touchscreen control of up to six 12V accessory circuits from a compatible Garmin navigator or smartphone running the Garmin PowerSwitch app. Each of the six switch outputs is rated at up to 30 amps, with a total system capacity of 100 amps across all outputs. Installation requires no cutting into the dashboard or routing wires through the firewall, and does not interfere with existing vehicle electronics. Control is via Bluetooth wireless connectivity to compatible Garmin navigators or smartphones. Up to four controllers can be paired to one PowerSwitch device, and up to four PowerSwitch devices can be controlled from a single controller. The Garmin PowerSwitch app supports Apple CarPlay and Android Auto, allowing switching functions to be accessed from a compatible in-dash infotainment display. Two hardwire control inputs accept signals from 3.3V to 18V for automatic output triggering, such as connecting the vehicle ignition to turn accessories on automatically at startup. Custom virtual switch panels with labels, icons, channel groups, dimming, and flashing controls are configurable through the app. The 010-02466-00 measures 12.5 x 3.2 x 7.5cm and weighs 283g, providing a compact footprint suited to mounting in side-by-sides, UTVs, ATVs, 4WDs, and snowmobiles. The unit is IPX7 weather resistant. The Garmin 010-02466-00 PowerSwitch is not intended for controlling motors with reverse polarity. Features & Benefits Six 30-Amp Switch Outputs - 100 Amps Total: The 010-02466-00 provides six independent switch outputs rated at up to 30 amps each, with a combined total capacity of 100 amps, allowing a wide range of 12V accessories including light bars, compressors, refrigerators, and communication radios to be controlled from a single device. Bluetooth Wireless Control via Compatible Garmin Navigator or Smartphone: The 010-02466-00 connects to compatible Garmin navigators or smartphones via Bluetooth, enabling wireless touchscreen control of all six outputs without physical switch panels or dashboard modifications. Garmin PowerSwitch App with Apple CarPlay and Android Auto Support: The Garmin PowerSwitch app enables control of switching functions and provides in-dash connectivity via Apple CarPlay and Android Auto on compatible in-dash infotainment displays, keeping accessory control accessible within the driver's existing touchscreen environment. Two Hardwire Control Inputs: The 010-02466-00 includes two hardwire control inputs that detect signals from 3.3V to 18V to trigger customisable outputs automatically. Common applications include connecting the vehicle ignition switch to automatically activate accessories at startup. Up to Four Controllers and Four Devices: Up to four controllers can be paired to one PowerSwitch device, and a single controller can manage up to four PowerSwitch devices simultaneously, providing scalability for complex accessory control setups. Customisable Virtual Switch Panels: The Garmin PowerSwitch app allows custom virtual switch panels to be created with user-defined labels, icons, and channel groups. Dimming and flashing controls for lighting systems are also supported, making light bar, rock light, and emergency flasher management straightforward from the touchscreen. IPX7 Weather Resistance: The 010-02466-00 is IPX7 rated, providing protection against water immersion up to 1 metre for 30 minutes, making it suitable for installation in exposed or outdoor vehicle environments including 4WDs, ATVs, and snowmobiles. No Dashboard Cutting or Firewall Routing Required: The installation process requires no cutting into the dashboard or routing of wires through the vehicle firewall, simplifying the installation and avoiding interference with existing vehicle electronics. Compact Form Factor for Flexible Mounting: At 12.5 x 3.2 x 7.5cm and 283g, the 010-02466-00 is compact enough to mount in a wide range of vehicle types and locations including side-by-sides, UTVs, ATVs, 4WDs, and snowmobiles. Technical Specs Specification Detail SKU 010-02466-00 Brand Garmin Dimensions 12.5 x 3.2 x 7.5cm (4.9 x 1.3 x 3.0") Weight 283g (10 oz) Water Rating IPX7 Number of Switch Outputs 6 Max Amps Per Switch Output 30A Max Total Amps 100A Number of Hardwire Inputs 2 Hardwire Input Voltage Range 3.3V to 18V Input Voltage 12V DC Wireless Connectivity Bluetooth Max Controllers per PowerSwitch 4 Max PowerSwitch Devices per Controller 4 CarPlay / Android Auto Support Yes (via Garmin PowerSwitch app) Customisable Switch Panels Yes (labels, icons, channel groups, dimming, flashing) Compatible App Garmin PowerSwitch App Reverse Polarity Motor Control Not intended for use What's in the Box Garmin 010-02466-00 PowerSwitch Power Cable Ground Cable Terminals Documentation Compatible With The Garmin 010-02466-00 PowerSwitch is compatible with the following Garmin navigators: Alpha XL, dēzl OTR610, OTR620, OTR710, OTR720, OTR810, OTR820, OTR1010, OTR1020, dēzlCam OTR710, dēzlCam OTR725, Overlander, RV 795, RV 890, RV 895, RV 1090, RV 1095, RVcam 795, Tread, Tread Base Edition, Tread Overland Edition, Tread SxS Edition, Tread 2, Tread 2 Overland Edition, Tread 2 SxS Edition, Tread XL Baja Chase Edition, Tread XL Baja Race Edition, Tread XL Overland Edition, zūmo XT, zūmo XT2, zūmo XT3. The Garmin PowerSwitch app is also available for compatible smartphones for wireless control without a dedicated Garmin navigator. The 010-02466-00 is not intended for controlling motors with reverse polarity. Frequently Asked Questions Does the Garmin 010-02466-00 PowerSwitch require a Garmin navigator to operate? No. The 010-02466-00 can be controlled via the Garmin PowerSwitch app on a compatible smartphone in addition to compatible Garmin navigators. A compatible device running the Garmin PowerSwitch app and paired to the PowerSwitch via Bluetooth is required for wireless control. How many accessories can be controlled from one Garmin 010-02466-00? One 010-02466-00 provides six independent switch outputs at up to 30 amps each. For larger setups, up to four PowerSwitch devices can be controlled from a single compatible navigator or smartphone, providing up to 24 independently controlled outputs from one display. Does the Garmin 010-02466-00 work with Apple CarPlay and Android Auto? Yes. The Garmin PowerSwitch app supports Apple CarPlay and Android Auto connectivity, allowing switching functions to be accessed and controlled from a compatible in-dash infotainment display that supports these platforms. Does installing the Garmin 010-02466-00 require cutting the dashboard or routing wires through the firewall? No. The 010-02466-00 is designed for installation without cutting into the dashboard or routing cables through the firewall, and does not interfere with existing vehicle electronics. What are the hardwire control inputs used for? The two hardwire control inputs accept signals from 3.3V to 18V and can be used to automatically trigger configured outputs. A common application is connecting the vehicle ignition switch to a control input so that selected accessories activate automatically each time the vehicle is started.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Enerdrive EN43520 20A MPPT Solar Charge Controller 12/24V A 20A MPPT solar charge controller for 12V and 24V systems, the Enerdrive EN43520 uses advanced MPPT control algorithm with up to 99.5% tracking efficiency and 98.3% maximum DC/DC transfer efficiency, with self-adaptive three-stage charging, LCD display, IP33 protection, and RS485 communications port. Product Overview The Enerdrive EN43520 is a 20A MPPT solar charge controller designed for 12V and 24V DC systems with automatic voltage selection. It supports recommended PV array power of up to 300W at 12V and 600W at 24V, with overdrive capability up to 360W at 12V and 720W at 24V. The MPPT control algorithm minimises maximum power point loss rate and loss time, tracking the MPP of the PV array to extract maximum energy under any conditions, delivering 20-30% greater energy utilisation compared to PWM charging methods. The EN43520 uses a self-adaptive three-stage digital charging mode to prolong battery lifespan and improve system performance, and supports both lead-acid and lithium battery types. Comprehensive electronic protection covers overcharge, over discharge, and PV and battery reverse polarity. The MPPT voltage range runs from battery voltage plus 2V up to 72V, with maximum PV open circuit voltage of 100V at minimum operating temperature and 92V at 25°C. The unit includes an LCD display with configurable backlight timeout, an RS485 interface via RJ45 for communications, and IP33 ingress protection with isolated RS485 design. CE certified to LVD EN/IEC62109 and EMC EN61000-6-1/3. Suitable for RV, marine, remote off-grid monitoring, and other applications. Features & Benefits Advanced MPPT Control Algorithm - Up to 99.5% Tracking Efficiency: The EN43520 uses an advanced MPPT algorithm with ultra-fast tracking speed to minimise MPP loss rate and loss time, accurately recognising and tracking multi-peak maximum power points for up to 99.5% tracking efficiency across varying solar conditions. 98.3% Maximum DC/DC Transfer Efficiency: Maximum DC/DC transfer efficiency of 98.3% ensures minimal energy loss between the PV array and battery bank, maximising the usable energy yield from the connected solar panels. 20-30% Greater Energy Utilisation than PWM Charging: The MPPT charging method increases the ratio of energy utilisation in the solar system by 20-30% compared with PWM charging methods, delivering more charge to the battery from the same PV array. Self-Adaptive Three-Stage Charging Mode: The digital control circuit-based three-stage charging mode adapts to battery conditions to effectively prolong battery lifespan and improve overall system performance across both lead-acid and lithium battery types. Supports Lead-Acid and Lithium Batteries: The EN43520 is compatible with both lead-acid and lithium battery systems. When lithium batteries are used, the system voltage cannot be identified automatically and the temperature compensation coefficient must be set to 0. 12/24V Auto-Select Nominal Voltage: The EN43520 automatically selects 12V or 24V operation based on the connected battery system, supporting battery voltage ranges from 8V to 32V. Automatic voltage selection is not available when lithium batteries are used. Comprehensive Electronic Protection: Built-in protection covers overcharge, over discharge, and PV and battery reverse polarity, protecting both the controller and connected battery and PV systems from common fault conditions. LCD Display with Configurable Backlight: The integrated LCD display provides real-time monitoring of system data and energy statistics. Backlight timeout is configurable from 0 to 999 seconds, with OS mode keeping the backlight on continuously. IP33 Ingress Protection with Isolated RS485: IP33 rated ingress protection and an isolated RS485 interface via RJ45 connector improve reliability in RV, marine, and remote installation environments and support communications for future application integration. Automatic Power Reduction Over Temperature: When internal temperature reaches 81°C, the controller automatically reduces charging power to protect the unit, allowing full load operation across the -25°C to +50°C environmental temperature range below this threshold. CE Certified: The EN43520 holds CE certification to LVD EN/IEC62109 and EMC EN61000-6-1/3 standards. Technical Specs Specification Detail SKU EN43520 Brand Enerdrive Nominal Voltage Range 12/24V DC Auto Select Battery Voltage Range 8-32V Maximum Battery Current Output 20A Maximum Load Current Output 20A Maximum PV Open Circuit Voltage 100V (at minimum operating temperature), 92V (at 25°C) MPPT Voltage Range (Battery Voltage + 2V) to 72V Maximum PV Array Power Recommended 300W at 12V, 600W at 24V Maximum PV Array Power Allowed (Overdrive) 360W at 12V, 720W at 24V Maximum Efficiency 98.3% Tracking Efficiency Up to 99.5% Self Consumption 30mA (12V), 16mA (24V) Temperature Compensation Coefficient -3mV/°C/12V (default) Grounding Common Negative RS485 Interface 5VDC/200mA (RJ45) LCD Backlight Timeout Default 60s, Range 0-999s Battery Types Supported Lead-Acid, Lithium IP Rating IP33 Environmental Temperature -25°C to +50°C Storage Temperature -20°C to +70°C Relative Humidity 95% N.C. Dimensions (L x W x H) 217 x 158 x 56.5mm Mounting Hole Dimensions 160 x 149mm Mounting Hole Size 5mm Maximum Cable Size 10AWG (6mm²) Recommended Cable Size 10AWG (6mm²) Certification CE (LVD EN/IEC62109, EMC EN61000-6-1/3) Compatible With The EN43520 is compatible with 12V and 24V DC battery systems including lead-acid and lithium batteries within a voltage range of 8-32V. The MPPT voltage range of battery voltage plus 2V to 72V supports a wide range of PV panel configurations. Maximum recommended PV array power is 300W at 12V and 600W at 24V. Overdrive is supported up to 360W at 12V and 720W at 24V. When lithium batteries are used, automatic voltage selection is not available and the temperature compensation coefficient must be set to 0. Suitable for RV, marine, remote off-grid monitoring, and similar applications. Frequently Asked Questions What is the difference between MPPT and PWM solar charge controllers? MPPT (Maximum Power Point Tracking) controllers continuously track the maximum power point of the PV array and convert excess voltage into additional charge current, increasing energy utilisation by 20-30% compared to PWM (Pulse Width Modulation) controllers. PWM controllers directly connect the PV array to the battery and do not optimise power conversion. The EN43520's advanced MPPT algorithm achieves up to 99.5% tracking efficiency with a maximum DC/DC transfer efficiency of 98.3%. Does the EN43520 support lithium batteries? Yes. The EN43520 supports lithium batteries. When lithium batteries are used, the system voltage cannot be identified automatically and must be configured manually. The temperature compensation coefficient must also be set to 0 when using lithium batteries. What is the maximum solar panel wattage I can connect to the EN43520? The recommended maximum PV array power is 300W for a 12V system and 600W for a 24V system. Overdrive operation is supported up to 360W at 12V and 720W at 24V. The maximum PV open circuit voltage is 100V at minimum operating temperature and 92V at 25°C. What does the RS485 interface on the EN43520 provide? The EN43520 includes an RS485 communications port via RJ45 connector rated at 5VDC/200mA. The isolated RS485 design improves controller reliability and supports communications connectivity for future application integration and remote monitoring setups. What protection does the EN43520 include? The EN43520 provides comprehensive electronic protection covering overcharge, over discharge, and PV and battery reverse polarity. Automatic power reduction activates when the internal temperature reaches 81°C. The unit is also IP33 rated for ingress protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Enerdrive EN43540 40A MPPT Solar Charge Controller 12/24V A 40A MPPT solar charge controller for 12V and 24V systems, the Enerdrive EN43540 uses advanced MPPT control algorithm with up to 99.5% tracking efficiency and 98.6% maximum DC/DC transfer efficiency, with self-adaptive three-stage charging, LCD display, IP33 protection, and RS485 communications port. Product Overview The Enerdrive EN43540 is a 40A MPPT solar charge controller designed for 12V and 24V DC systems with automatic voltage selection. It supports recommended PV array power of up to 600W at 12V and 1200W at 24V, with overdrive capability up to 720W at 12V and 1440W at 24V. The MPPT control algorithm minimises maximum power point loss rate and loss time, tracking the MPP of the PV array to extract maximum energy under any conditions, delivering 20-30% greater energy utilisation compared to PWM charging methods. The EN43540 uses a self-adaptive three-stage digital charging mode to prolong battery lifespan and improve system performance, and supports both lead-acid and lithium battery types. Comprehensive electronic protection covers overcharge, over discharge, and PV and battery reverse polarity. The MPPT voltage range runs from battery voltage plus 2V up to 72V, with maximum PV open circuit voltage of 100V at minimum operating temperature and 92V at 25°C. The unit includes an LCD display with configurable backlight timeout, an RS485 interface via RJ45 for communications, and IP33 ingress protection with isolated RS485 design. CE certified to LVD EN/IEC62109 and EMC EN61000-6-1/3. Suitable for RV, marine, remote off-grid monitoring, and other applications. Features & Benefits Advanced MPPT Control Algorithm - Up to 99.5% Tracking Efficiency: The EN43540 uses an advanced MPPT algorithm with ultra-fast tracking speed to minimise MPP loss rate and loss time, accurately recognising and tracking multi-peak maximum power points for up to 99.5% tracking efficiency across varying solar conditions. 98.6% Maximum DC/DC Transfer Efficiency: Maximum DC/DC transfer efficiency of 98.6% ensures minimal energy loss between the PV array and battery bank, maximising the usable energy yield from the connected solar panels. 20-30% Greater Energy Utilisation than PWM Charging: The MPPT charging method increases the ratio of energy utilisation in the solar system by 20-30% compared with PWM charging methods, delivering more charge to the battery from the same PV array. Self-Adaptive Three-Stage Charging Mode: The digital control circuit-based three-stage charging mode adapts to battery conditions to effectively prolong battery lifespan and improve overall system performance across both lead-acid and lithium battery types. Supports Lead-Acid and Lithium Batteries: The EN43540 is compatible with both lead-acid and lithium battery systems. When lithium batteries are used, the system voltage cannot be identified automatically and the temperature compensation coefficient must be set to 0. 12/24V Auto-Select Nominal Voltage: The EN43540 automatically selects 12V or 24V operation based on the connected battery system, supporting battery voltage ranges from 8V to 32V. Automatic voltage selection is not available when lithium batteries are used. Comprehensive Electronic Protection: Built-in protection covers overcharge, over discharge, and PV and battery reverse polarity, protecting both the controller and connected battery and PV systems from common fault conditions. LCD Display with Configurable Backlight: The integrated LCD display provides real-time monitoring of system data and energy statistics. Backlight timeout is configurable from 0 to 999 seconds, with OS mode keeping the backlight on continuously. IP33 Ingress Protection with Isolated RS485: IP33 rated ingress protection and an isolated RS485 interface via RJ45 connector improve reliability in RV, marine, and remote installation environments and support communications for future application integration. Automatic Power Reduction Over Temperature: When internal temperature reaches 81°C, the controller automatically reduces charging power to protect the unit, allowing full load operation across the -25°C to +50°C environmental temperature range below this threshold. CE Certified: The EN43540 holds CE certification to LVD EN/IEC62109 and EMC EN61000-6-1/3 standards. Technical Specs Specification Detail SKU EN43540 Brand Enerdrive Nominal Voltage Range 12/24V DC Auto Select Battery Voltage Range 8-32V Maximum Battery Current Output 40A Maximum Load Current Output 40A Maximum PV Open Circuit Voltage 100V (at minimum operating temperature), 92V (at 25°C) MPPT Voltage Range (Battery Voltage + 2V) to 72V Maximum PV Array Power Recommended 600W at 12V, 1200W at 24V Maximum PV Array Power Allowed (Overdrive) 720W at 12V, 1440W at 24V Maximum Efficiency 98.6% Tracking Efficiency Up to 99.5% Self Consumption 30mA (12V), 16mA (24V) Temperature Compensation Coefficient -3mV/°C/12V (default) Grounding Common Negative RS485 Interface 5VDC/200mA (RJ45) LCD Backlight Timeout Default 60s, Range 0-999s Battery Types Supported Lead-Acid, Lithium IP Rating IP33 Environmental Temperature -25°C to +50°C Storage Temperature -20°C to +70°C Relative Humidity 95% N.C. Dimensions (L x W x H) 255 x 185 x 67.8mm Mounting Hole Dimensions 200 x 176mm Mounting Hole Size 5mm Maximum Cable Size 6AWG (13.2mm²) Recommended Cable Size 6AWG (13.2mm²) Certification CE (LVD EN/IEC62109, EMC EN61000-6-1/3) Compatible With The EN43540 is compatible with 12V and 24V DC battery systems including lead-acid and lithium batteries within a voltage range of 8-32V. The MPPT voltage range of battery voltage plus 2V to 72V supports a wide range of PV panel configurations. Maximum recommended PV array power is 600W at 12V and 1200W at 24V. Overdrive is supported up to 720W at 12V and 1440W at 24V. When lithium batteries are used, automatic voltage selection is not available and the temperature compensation coefficient must be set to 0. Suitable for RV, marine, remote off-grid monitoring, and similar applications. Frequently Asked Questions What is the difference between MPPT and PWM solar charge controllers? MPPT (Maximum Power Point Tracking) controllers continuously track the maximum power point of the PV array and convert excess voltage into additional charge current, increasing energy utilisation by 20-30% compared to PWM (Pulse Width Modulation) controllers. PWM controllers directly connect the PV array to the battery and do not optimise power conversion. The EN43540's advanced MPPT algorithm achieves up to 99.5% tracking efficiency with a maximum DC/DC transfer efficiency of 98.6%. Does the EN43540 support lithium batteries? Yes. The EN43540 supports lithium batteries. When lithium batteries are used, the system voltage cannot be identified automatically and must be configured manually. The temperature compensation coefficient must also be set to 0 when using lithium batteries. What is the maximum solar panel wattage I can connect to the EN43540? The recommended maximum PV array power is 600W for a 12V system and 1200W for a 24V system. Overdrive operation is supported up to 720W at 12V and 1440W at 24V. The maximum PV open circuit voltage is 100V at minimum operating temperature and 92V at 25°C. What does the RS485 interface on the EN43540 provide? The EN43540 includes an RS485 communications port via RJ45 connector rated at 5VDC/200mA. The isolated RS485 design improves controller reliability and supports communications connectivity for future application integration and remote monitoring setups. What protection does the EN43540 include? The EN43540 provides comprehensive electronic protection covering overcharge, over discharge, and PV and battery reverse polarity. Automatic power reduction activates when the internal temperature reaches 81°C. The unit is also IP33 rated for ingress protection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9725 Toyota Landcruiser 300 Series 06/2022-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Toyota Landcruiser 300 Series (June 2022-on), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9725 is a bonnet mount antenna bracket designed specifically for the Toyota Landcruiser 300 Series (June 2022-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9725 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of the vehicle. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Toyota Landcruiser 300 Series, providing a clean and secure antenna mounting position. Vehicle-Specific Fit: Engineered specifically for the Toyota Landcruiser 300 Series (June 2022-on) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9725 Brand Hulk 4x4 Compatible Vehicle Toyota Landcruiser 300 Series 06/2022-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675450 Compatible With Toyota Landcruiser 300 Series 06/2022-on (Passenger Side) Frequently Asked Questions Is the HU9725 compatible with Landcruiser 300 Series models before June 2022? No. The HU9725 is designed for the Toyota Landcruiser 300 Series from June 2022-on. Please contact us to confirm the correct bracket for earlier Landcruiser variants. Is a driver-side version of this bracket available? The HU9725 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Toyota Landcruiser 300 Series. What type of antenna is compatible with this bracket? The HU9725 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9725 is a bolt-on bracket designed for vehicle-specific fitment on the Toyota Landcruiser 300 Series bonnet. Please refer to the product instructions or contact us for installation guidance. Does the bracket affect the operation of the bonnet or wipers? The HU9725 is a bonnet mount bracket. Please refer to the installation instructions and confirm fitment details with us before installation if you have concerns about interference with bonnet operation or wiper function.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9730 Mitsubishi Triton MR 2018-2023 Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Mitsubishi Triton MR (2018-2023), finished in black powder coat for enhanced corrosion resistance. Includes extra hardware nuts. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9730 is a bonnet mount antenna bracket designed specifically for the Mitsubishi Triton MR (2018-2023). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9730 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of the vehicle. Extra hardware nuts are included. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Mitsubishi Triton MR, providing a clean and secure antenna mounting position. Extra Hardware Included: Additional nuts are included in the pack for a complete installation. Vehicle-Specific Fit: Engineered specifically for the Mitsubishi Triton MR (2018-2023) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9730 Brand Hulk 4x4 Compatible Vehicle Mitsubishi Triton MR 2018-2023 Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Included Extra Hardware Nuts Barcode 9356659675504 What's in the Box HU9730 Bonnet Mount Antenna Bracket Extra Hardware Nuts Compatible With Mitsubishi Triton MR 2018-2023 (Passenger Side) Frequently Asked Questions Is the HU9730 compatible with Triton models outside the 2018-2023 MR range? No. The HU9730 is designed specifically for the Mitsubishi Triton MR (2018-2023). Please contact us to confirm the correct bracket for earlier or later Triton variants. Is a driver-side version of this bracket available? The HU9730 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Mitsubishi Triton MR. What type of antenna is compatible with this bracket? The HU9730 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9730 is a bolt-on bracket designed for vehicle-specific fitment on the Mitsubishi Triton MR bonnet. Please refer to the product instructions or contact us for installation guidance. Does the bracket include all hardware required for installation? Extra hardware nuts are included. Please refer to the product instructions or contact us to confirm whether additional hardware is required for your specific installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9726 Next Gen Ford Ranger and Everest 2022-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Next Gen Ford Ranger and Ford Everest (2022-on), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9726 is a bonnet mount antenna bracket designed specifically for the Next Gen Ford Ranger and Ford Everest (2022-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9726 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of both vehicles. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Next Gen Ford Ranger and Everest, providing a clean and secure antenna mounting position. Suits Both Ford Ranger and Ford Everest: A single bracket covers both the Next Gen Ford Ranger and Ford Everest (2022-on) platforms, providing compatibility across both popular Ford 4WD models. Vehicle-Specific Fit: Engineered specifically for the Next Gen Ford Ranger and Everest (2022-on) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9726 Brand Hulk 4x4 Compatible Vehicles Ford Ranger 2022-on, Ford Everest 2022-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675467 Compatible With Ford Ranger 2022-on (Next Gen, Passenger Side) Ford Everest 2022-on (Passenger Side) Frequently Asked Questions Is the HU9726 compatible with Ford Ranger models before 2022? No. The HU9726 is designed for the Next Gen Ford Ranger and Everest from 2022-on. Please contact us to confirm the correct bracket for earlier Ford Ranger or Everest variants. Does the HU9726 fit both the Ford Ranger and Ford Everest? Yes. The HU9726 is compatible with both the Next Gen Ford Ranger (2022-on) and the Ford Everest (2022-on), covering both platforms with a single bracket. Is a driver-side version of this bracket available? The HU9726 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Next Gen Ford Ranger and Everest. What type of antenna is compatible with this bracket? The HU9726 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9726 is a bolt-on bracket designed for vehicle-specific fitment on the Next Gen Ford Ranger and Everest bonnet. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9727 Nissan Patrol Y62 2020-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Nissan Patrol Y62 (2020-on), finished in black powder coat for enhanced corrosion resistance. Includes extra hardware nuts. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9727 is a bonnet mount antenna bracket designed specifically for the Nissan Patrol Y62 (2020-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9727 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet. Extra hardware nuts are included. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Nissan Patrol Y62, providing a clean and secure antenna mounting position. Extra Hardware Included: Additional nuts are included in the pack for a complete installation. Vehicle-Specific Fit: Engineered specifically for the Nissan Patrol Y62 (2020-on) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9727 Brand Hulk 4x4 Compatible Vehicle Nissan Patrol Y62 2020-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Included Extra Hardware Nuts Barcode 9356659675474 What's in the Box HU9727 Bonnet Mount Antenna Bracket Extra Hardware Nuts Compatible With Nissan Patrol Y62 2020-on (Passenger Side) Frequently Asked Questions Is the HU9727 compatible with Nissan Patrol Y62 models before 2020? No. The HU9727 is designed for the Nissan Patrol Y62 from 2020-on. Please contact us to confirm the correct bracket for earlier Y62 or other Patrol variants. Is a driver-side version of this bracket available? The HU9727 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Nissan Patrol Y62. What type of antenna is compatible with this bracket? The HU9727 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Does the bracket include all hardware required for installation? Extra hardware nuts are included. Please refer to the product instructions or contact us to confirm whether additional hardware is required for your specific installation. Is installation straightforward for a DIY install? The HU9727 is a bolt-on bracket designed for vehicle-specific fitment on the Nissan Patrol Y62 bonnet. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9720 Isuzu D-Max, MUX and Mazda BT-50 2021-On Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 (2021-on), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9720 is a bonnet mount antenna bracket designed specifically for the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 (2021-on). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9720 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet across all three compatible models. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Isuzu D-Max, MUX, and Mazda BT-50, providing a clean and secure antenna mounting position. Three-Model Compatibility: A single bracket covers the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 (all 2021-on), providing compatibility across three popular platforms that share a common bonnet mounting configuration. Vehicle-Specific Fit: Engineered specifically for the 2021-on generation of the D-Max, MUX, and BT-50 for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9720 Brand Hulk 4x4 Compatible Vehicles Isuzu D-Max 2021-on, Isuzu MUX 2021-on, Mazda BT-50 2021-on Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675368 Compatible With Isuzu D-Max 2021-on (Passenger Side) Isuzu MUX 2021-on (Passenger Side) Mazda BT-50 2021-on (Passenger Side) Frequently Asked Questions Is the HU9720 compatible with Isuzu D-Max or Mazda BT-50 models before 2021? No. The HU9720 is designed for the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 from 2021-on. Please contact us to confirm the correct bracket for earlier generation variants. Does the HU9720 fit the Isuzu MUX as well as the D-Max? Yes. The HU9720 is confirmed compatible with the Isuzu D-Max, Isuzu MUX, and Mazda BT-50 from 2021-on, covering all three models with a single bracket. Is a driver-side version of this bracket available? The HU9720 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for these vehicles. What type of antenna is compatible with this bracket? The HU9720 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9720 is a bolt-on bracket designed for vehicle-specific fitment. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9721 Ford Ranger PX and Everest 2012-2021 Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Ford Ranger PX and Ford Everest (2012-2021), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9721 is a bonnet mount antenna bracket designed specifically for the Ford Ranger PX and Ford Everest (2012-2021). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9721 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of both vehicles. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Ford Ranger PX and Everest, providing a clean and secure antenna mounting position. Suits Both Ford Ranger PX and Ford Everest: A single bracket covers both the Ford Ranger PX and Ford Everest (2012-2021), providing compatibility across both popular Ford 4WD platforms. Vehicle-Specific Fit: Engineered specifically for the Ford Ranger PX and Everest (2012-2021) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9721 Brand Hulk 4x4 Compatible Vehicles Ford Ranger PX 2012-2021, Ford Everest 2012-2021 Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675412 Compatible With Ford Ranger PX 2012-2021 (Passenger Side) Ford Everest 2012-2021 (Passenger Side) Frequently Asked Questions Is the HU9721 compatible with the Next Gen Ford Ranger (2022-on)? No. The HU9721 is designed for the Ford Ranger PX and Everest (2012-2021). For the Next Gen Ford Ranger and Everest (2022-on), please see the Hulk 4x4 HU9726. Does the HU9721 fit both the Ford Ranger PX and the Ford Everest? Yes. The HU9721 is confirmed compatible with both the Ford Ranger PX and Ford Everest from 2012-2021, covering both platforms with a single bracket. Is a driver-side version of this bracket available? The HU9721 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Ford Ranger PX and Everest. What type of antenna is compatible with this bracket? The HU9721 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9721 is a bolt-on bracket designed for vehicle-specific fitment on the Ford Ranger PX and Everest bonnet. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9722 Toyota Prado 150 Series 2013-2022 Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Toyota Prado 150 Series (2013-2022), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9722 is a bonnet mount antenna bracket designed specifically for the Toyota Prado 150 Series (2013-2022). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9722 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Toyota Prado 150 Series, providing a clean and secure antenna mounting position. Vehicle-Specific Fit: Engineered specifically for the Toyota Prado 150 Series (2013-2022) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9722 Brand Hulk 4x4 Compatible Vehicle Toyota Prado 150 Series 2013-2022 Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675429 Compatible With Toyota Prado 150 Series 2013-2022 (Passenger Side) Frequently Asked Questions Is the HU9722 compatible with Toyota Prado 150 Series models before 2013 or after 2022? No. The HU9722 is designed for the Toyota Prado 150 Series from 2013 to 2022 only. Please contact us to confirm the correct bracket for earlier or later Prado variants. Is a driver-side version of this bracket available? The HU9722 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Toyota Prado 150 Series. What type of antenna is compatible with this bracket? The HU9722 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9722 is a bolt-on bracket designed for vehicle-specific fitment on the Toyota Prado 150 Series bonnet. Please refer to the product instructions or contact us for installation guidance. Does the bracket affect the operation of the bonnet or wipers? The HU9722 is a bonnet mount bracket. Please refer to the installation instructions and confirm fitment details with us before installation if you have concerns about interference with bonnet operation or wiper function.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9723 Toyota Hilux and Fortuner 2015-2021 Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Toyota Hilux and Toyota Fortuner (2015-2021), finished in black powder coat for enhanced corrosion resistance. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9723 is a bonnet mount antenna bracket designed specifically for the Toyota Hilux and Toyota Fortuner (2015-2021). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9723 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet of both vehicles. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Toyota Hilux and Fortuner, providing a clean and secure antenna mounting position. Suits Both Toyota Hilux and Toyota Fortuner: A single bracket covers both the Toyota Hilux and Toyota Fortuner (2015-2021), providing compatibility across both popular Toyota platforms. Vehicle-Specific Fit: Engineered specifically for the Toyota Hilux and Fortuner (2015-2021) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9723 Brand Hulk 4x4 Compatible Vehicles Toyota Hilux 2015-2021, Toyota Fortuner 2015-2021 Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675436 Compatible With Toyota Hilux 2015-2021 (Passenger Side) Toyota Fortuner 2015-2021 (Passenger Side) Frequently Asked Questions Is the HU9723 compatible with Toyota Hilux or Fortuner models outside the 2015-2021 range? No. The HU9723 is designed for the Toyota Hilux and Fortuner from 2015 to 2021 only. Please contact us to confirm the correct bracket for earlier or later variants. Does the HU9723 fit both the Toyota Hilux and the Toyota Fortuner? Yes. The HU9723 is confirmed compatible with both the Toyota Hilux and Toyota Fortuner from 2015 to 2021, covering both platforms with a single bracket. Is a driver-side version of this bracket available? The HU9723 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Toyota Hilux and Fortuner. What type of antenna is compatible with this bracket? The HU9723 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9723 is a bolt-on bracket designed for vehicle-specific fitment on the Toyota Hilux and Fortuner bonnet. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hulk 4x4 HU9724 VW Amarok 2011-2021 Bonnet Mount Antenna Bracket - Passenger Side A robust 5mm steel passenger-side bonnet mount antenna bracket for the Volkswagen Amarok (2011-2021), finished in black powder coat for enhanced corrosion resistance. Not compatible with the current Amarok model. Designed for reliable antenna mounting on and off-road. Product Overview The Hulk 4x4 HU9724 is a bonnet mount antenna bracket designed specifically for the Volkswagen Amarok (2011-2021). Manufactured from 5mm thick steel and finished in black powder coat for enhanced corrosion resistance, the HU9724 provides a strong, durable mounting point for UHF antennas on the passenger-side bonnet. Please note this bracket is not compatible with the current generation Amarok model. Suitable for daily driving and off-road use. Features & Benefits 5mm Steel Construction: Manufactured from 5mm thick steel for a strong, rigid antenna mount that handles vibration and the demands of off-road driving. Black Powder-Coated Finish: A black powder-coat finish provides enhanced corrosion resistance for long-term durability in all Australian conditions. Passenger-Side Bonnet Mount: Designed for the passenger-side bonnet of the Volkswagen Amarok (2011-2021), providing a clean and secure antenna mounting position. Vehicle-Specific Fit: Engineered specifically for the Volkswagen Amarok (2011-2021) for a precise, purpose-fitted installation. Technical Specs Specification Detail SKU HU9724 Brand Hulk 4x4 Compatible Vehicle VW Amarok 2011-2021 (not current model) Mount Position Passenger Side Material 5mm Steel Finish Black Powder Coat Barcode 9356659675443 Compatible With Volkswagen Amarok 2011-2021 (Passenger Side) Not compatible with the current generation Volkswagen Amarok model. Frequently Asked Questions Is the HU9724 compatible with the current generation Volkswagen Amarok? No. The HU9724 is designed for the Volkswagen Amarok from 2011 to 2021 only and is not compatible with the current Amarok model. Please contact us to confirm the correct bracket for the current generation Amarok. Is the HU9724 compatible with Volkswagen Amarok models after 2021? No. The HU9724 covers the Volkswagen Amarok from 2011 to 2021 only. Please contact us for bracket options for the current generation Amarok. Is a driver-side version of this bracket available? The HU9724 is a passenger-side bracket. Please contact us to enquire about driver-side antenna bracket options for the Volkswagen Amarok. What type of antenna is compatible with this bracket? The HU9724 is a standard bonnet mount bracket compatible with most UHF CB antennas. Please confirm the antenna mount thread specification with your preferred antenna supplier before purchasing. Is installation straightforward for a DIY install? The HU9724 is a bolt-on bracket designed for vehicle-specific fitment on the Volkswagen Amarok bonnet. Please refer to the product instructions or contact us for installation guidance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less