OPEK CX301U - 3-Way Coaxial Antenna Switch for VHF/UHF Radio Systems Product Overview The OPEK CX301U is a professional-grade 3-way coaxial antenna switch enabling one radio to connect to three separate antennas or three radios to share one antenna. This versatile switching device features extended frequency range coverage up to 800MHz accommodating VHF and UHF communication systems including CB radios, marine VHF, amateur radio, commercial two-way systems, and cellular frequencies. The CX301U utilizes SO239 coaxial connectors with 1 input and 3 output configuration, providing manual switching between antenna paths without requiring disconnection and reconnection of coaxial cables. Constructed for reliable signal switching with minimal insertion loss, this antenna switch enables operators to select between different antenna types, locations, or heights based on communication requirements. Ideal for complex mobile installations requiring multiple antenna options, base stations with primary and backup antennas, marine vessels with bow, stern, and masthead antennas, and radio enthusiasts operating multiple frequency bands requiring antenna optimization for specific applications. Key Features 3-Way Antenna Switching - Manual switch enables selection between three antenna outputs from single radio input or selection between three radio inputs to single antenna output, providing expanded configuration flexibility for sophisticated communication systems. Extended Frequency Coverage - Supports frequencies up to 800MHz accommodating VHF marine (156-162MHz), UHF CB (477MHz), amateur radio bands (144MHz, 430MHz), commercial two-way systems, and cellular frequencies without requiring separate switching devices. SO239 Coaxial Connectors - Standard SO239 female connectors (1 input, 3 outputs) provide universal compatibility with PL259 male coaxial cable connectors used throughout amateur radio, CB, and commercial communication systems. Minimal Signal Loss - Professional-grade construction maintains signal integrity during switching with low insertion loss, ensuring maximum power transfer to selected antenna without significant performance degradation. Manual Mechanical Switching - Reliable mechanical switch mechanism provides positive tactile feedback and maintains selected position without requiring electrical power, eliminating failure points associated with electronic switching systems. Versatile Installation Options - Compact housing enables installation in mobile vehicles, base station equipment racks, marine vessels, or portable field operations, providing three-position antenna selection capability wherever communication systems operate. Technical Specifications Electrical Specifications: Frequency Range: Up to 800MHz Connector Type: SO239 Female Configuration: 1 Input / 3 Outputs Switch Type: Manual Mechanical Impedance: 50 Ohm Physical Specifications: Connector Positions: 4 Total (1 In, 3 Out) Application: Mobile Vehicle Multi-Antenna Systems Base Station Primary/Backup Antennas Marine Bow/Stern/Masthead Switching Amateur Radio Multi-Band Operations Complex Communication Systems Commercial Two-Way Radio Applications Installation Notes The OPEK CX301U antenna switch mounts in a convenient location accessible to the radio operator for manual switching. For mobile installations, mount the switch within reach of the driver or front passenger area. Connect the radio's coaxial cable to the single input SO239 connector using a PL259 male connector. Connect the three antenna coaxial cables to the three output SO239 connectors. Ensure all PL259 connectors are tightened hand-tight to maintain proper electrical contact. Label each output position to identify which antenna connects to each switch position (for example: Position 1 - High-Gain Highway, Position 2 - Compact Urban, Position 3 - Backup). Test all three antenna positions after installation to verify proper operation and signal quality on each antenna. For permanent installations, secure the switch housing to prevent movement during vehicle operation. The mechanical switch requires no electrical power connection. When switching between antennas, briefly key-up the radio on low power to verify the newly selected antenna is functioning before transmitting at full power. Frequently Asked Questions What is the advantage of 3-way switching over 2-way? The 3-way switch provides additional antenna selection options for complex communication systems. Applications include: high-gain antenna for highways, mid-gain for regional areas, compact antenna for urban parking; or primary antenna, backup antenna, and emergency spare; or separate antennas optimized for different frequency bands or terrain conditions. Can I use this to switch between three radios sharing one antenna? Yes, the CX301U operates bi-directionally. You can connect three radios to the three SO239 connectors and one antenna to the remaining connector, switching between radios. However, NEVER transmit on multiple radios simultaneously as this could damage radio equipment. Only one radio should be powered on or transmitting at any time. Does the 800MHz frequency range cover all CB and marine frequencies? Yes, the 800MHz upper limit fully covers Australian UHF CB frequencies (476.425-477.4125MHz), marine VHF (156-162MHz), amateur radio bands (144MHz, 430MHz), and commercial two-way radio systems. The extended range also accommodates cellular and other higher-frequency applications beyond typical communication radio requirements. How does 3-way switching affect signal loss compared to 2-way? Professional-grade antenna switches like the CX301U maintain minimal insertion loss (typically less than 0.3dB) regardless of the number of output positions. The additional switching position does not significantly increase signal loss. Ensure all connectors remain tight and clean to minimize any losses from poor connections. What are typical 3-antenna system applications? Common configurations include: mobile installations with highway high-gain, regional mid-gain, and urban compact antennas; base stations with primary directional, secondary omnidirectional, and emergency backup antennas; marine vessels with bow, stern, and masthead antennas for different operational scenarios; or multi-band amateur radio stations with frequency-optimized antennas for different bands.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OPEK CX5 - 3-Position Coaxial Antenna Switch Box for Radio Systems Product Overview The OPEK CX5 is a professional-grade 3-position coaxial antenna switch box enabling one radio to connect to three separate antennas or three radios to share one antenna. This versatile switching device utilizes SO239 coaxial connectors with 1 input and 3 output configuration, providing manual switching between antenna paths without requiring disconnection and reconnection of coaxial cables. Constructed for reliable signal switching with robust switch box housing, the CX5 enables operators to select between different antenna types, locations, or heights based on communication requirements. The mechanical switching mechanism provides positive position selection and maintains the selected antenna connection without requiring electrical power. Ideal for mobile installations requiring multiple antenna options, base stations with primary and backup antennas, marine vessels with multiple antenna locations, and radio enthusiasts operating different antenna configurations requiring quick selection capability for varying operational conditions. Key Features 3-Position Switching Capability - Manual rotary switch enables selection between three antenna outputs from single radio input or selection between three radio inputs to single antenna output, providing versatile configuration options for complex communication systems. SO239 Coaxial Connectors - Standard SO239 female connectors (1 input, 3 outputs) provide universal compatibility with PL259 male coaxial cable connectors used throughout amateur radio, CB, marine VHF, and commercial communication systems. Robust Switch Box Housing - Durable switch box construction protects switching mechanism from dust, moisture, and physical damage, providing long-term reliability in mobile vehicle, marine, and base station installations. Manual Mechanical Switching - Reliable mechanical rotary switch mechanism provides positive tactile feedback and maintains selected position without requiring electrical power, eliminating failure points associated with electronic switching systems. Minimal Signal Loss - Professional-grade construction maintains signal integrity during switching with low insertion loss, ensuring maximum power transfer to selected antenna without significant performance degradation. Versatile Installation Applications - Compact switch box housing enables installation in mobile vehicles, base station equipment areas, marine vessels, or portable field operations, providing three-position antenna selection wherever communication systems operate. Technical Specifications Electrical Specifications: Connector Type: SO239 Female Configuration: 1 Input / 3 Outputs Switch Type: Manual Mechanical Rotary Impedance: 50 Ohm Physical Specifications: Connector Positions: 4 Total (1 In, 3 Out) Housing: Switch Box Enclosure Application: Mobile Vehicle Multi-Antenna Systems Base Station Antenna Selection Marine Multiple Antenna Locations Amateur Radio Operations Backup Antenna Systems Commercial Radio Applications Installation Notes The OPEK CX5 antenna switch box mounts in a convenient location accessible to the radio operator for manual switching. For mobile installations, mount the switch box within reach of the driver or front passenger area using appropriate mounting hardware. Connect the radio's coaxial cable to the single input SO239 connector using a PL259 male connector. Connect the three antenna coaxial cables to the three output SO239 connectors. Ensure all PL259 connectors are tightened hand-tight to maintain proper electrical contact. Label each output position on the switch box to identify which antenna connects to each position (for example: Position 1, Position 2, Position 3 with antenna descriptions). Test all three antenna positions after installation to verify proper operation and signal quality on each antenna. Secure the switch box housing to prevent movement during vehicle operation or equipment use. The mechanical rotary switch requires no electrical power connection. When switching between antennas, rotate the switch to the desired position and briefly key-up the radio on low power to verify the newly selected antenna is functioning before transmitting at full power. Frequently Asked Questions What is the difference between the CX5 and other OPEK antenna switches? The CX5 features switch box housing providing robust protection for the switching mechanism compared to open-frame switch designs. The switch box enclosure protects internal components from dust, moisture, and physical damage, making it particularly suitable for harsh mobile, marine, and industrial environments requiring durable construction. Can I use this switch with CB radios? Yes, the CX5 utilizes standard SO239 connectors with 50-ohm impedance compatible with CB radio systems. The switch accommodates Australian UHF CB frequencies and standard PL259 coaxial connectors used throughout CB radio installations, making it ideal for CB systems requiring multiple antenna options. How do I know which position connects to which antenna? The switch box housing typically includes position markings (1, 2, 3) on the rotary switch dial. Label each position with your antenna descriptions using permanent marker or adhesive labels on the switch box housing. Test each position after installation to confirm which physical switch position corresponds to each antenna connection. Can I switch antennas while transmitting? No, never switch antenna positions while transmitting. Always return to receive mode before rotating the switch to a different antenna position. Switching during transmission can create momentary open circuits causing high SWR that may damage radio transmitter finals. Brief the radio on low power after switching to verify the new antenna is functioning. Does this switch work for marine radio installations? Yes, the CX5 is suitable for marine radio installations. The switch box housing provides better protection against marine environmental conditions compared to open-frame switches. Use the CX5 to select between bow, stern, and masthead antennas or between primary and backup antenna systems on vessels. Ensure the switch box is mounted in a protected location away from direct saltwater spray.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OPEK DL60 - VHF/UHF Dummy Load 60 Watts with Heat Sink Product Overview The OPEK DL60 is a professional-grade 60-watt VHF/UHF dummy load designed for safe radio testing, tuning, and adjustment without radiating RF energy into the atmosphere. This essential test equipment features integrated heat sink construction enabling extended testing periods by efficiently dissipating transmitter power as heat rather than electromagnetic radiation. The dummy load provides non-radiating 50-ohm impedance load allowing radio technicians, amateur operators, and commercial installers to test transmitters, adjust power output, verify antenna tuning, and troubleshoot radio systems without causing interference to other users or violating transmission regulations. The heat sink design accommodates continuous and intermittent testing up to 60 watts power handling, making it suitable for CB radios, marine VHF, amateur radio transceivers, and commercial two-way radio systems. Ideal for workshop installations, field service applications, radio equipment sales verification, and amateur radio stations requiring safe non-radiating test capabilities. Key Features 60-Watt Power Handling - Accommodates transmitter testing up to 60 watts output power covering CB radios, marine VHF transceivers, amateur handheld and mobile radios, and commercial two-way radio systems without requiring high-power dummy loads. Integrated Heat Sink - Built-in heat sink efficiently dissipates transmitted power as heat enabling extended testing periods without overheating, protecting internal dummy load resistor from thermal damage during continuous transmission testing. Non-Radiating Design - Converts transmitted RF energy into heat rather than electromagnetic radiation, enabling legal transmitter testing without causing interference to other radio users or violating transmission regulations prohibiting unnecessary transmissions. 50-Ohm Impedance Standard - Standard 50-ohm resistive load matches typical radio transmitter output impedance, providing accurate power measurement and preventing transmitter damage from mismatched loads during testing procedures. VHF/UHF Frequency Coverage - Designed for VHF and UHF frequency bands covering marine VHF (156-162MHz), amateur radio (144MHz, 430MHz), CB radio (477MHz), and commercial two-way radio systems requiring accurate non-radiating test loads. Professional Test Equipment - Essential tool for radio technicians performing equipment repairs, amateur operators conducting station maintenance, commercial installers verifying radio systems, and retailers demonstrating radio equipment functionality. Technical Specifications Electrical Specifications: Power Rating: 60 Watts Impedance: 50 Ohm Frequency Coverage: VHF/UHF Bands Load Type: Non-Radiating Resistive Physical Specifications: Cooling System: Integrated Heat Sink Application: Radio Transmitter Testing Power Output Adjustment SWR Meter Calibration Antenna Tuner Adjustment Equipment Troubleshooting Radio Sales Demonstration Installation Notes The OPEK DL60 dummy load connects directly to radio transmitter antenna outputs using appropriate coaxial cable connectors. Ensure the dummy load connector type matches your transmitter output (typically SO239 or BNC). For testing, disconnect the antenna from the transmitter and connect the DL60 dummy load in its place. The dummy load must be the only load connected to the transmitter during testing - never connect both antenna and dummy load simultaneously. Begin testing with low power output and gradually increase to operating power while monitoring the heat sink temperature. The integrated heat sink dissipates power as heat, so the unit will become warm during operation. Allow cooling periods between extended transmissions to prevent overheating. Never exceed the 60-watt continuous power rating. Position the dummy load in a well-ventilated area during testing to maximize heat dissipation. After testing, allow the unit to cool before handling or storage. Reconnect the antenna after completing testing procedures. Frequently Asked Questions What is a dummy load and why do I need one? A dummy load is a non-radiating test device that absorbs transmitted RF power without broadcasting signals into the atmosphere. This enables legal transmitter testing, tuning, and adjustment without causing interference to other radio users. Using a dummy load prevents unnecessary transmissions that violate communication regulations and allows safe equipment testing without requiring broadcast licenses. How long can I transmit into the dummy load? The DL60's integrated heat sink enables extended testing periods, but transmission duration depends on power level and ambient temperature. At maximum 60-watt power, limit continuous transmissions to 30-60 seconds followed by cooling periods. Lower power levels permit longer transmission times. Monitor heat sink temperature - if the unit becomes too hot to touch comfortably, stop testing and allow cooling. Can I use this dummy load for 100-watt radios? No, never exceed the DL60's 60-watt power rating. Transmitting at higher power levels can damage the internal resistor and create fire hazards. For radios exceeding 60 watts output, reduce transmitter power during testing or use higher-rated dummy loads designed for your transmitter's power output. Will the dummy load work with CB radios? Yes, the DL60 covers VHF/UHF frequencies including Australian UHF CB (477MHz). Most CB radios transmit 5 watts or less, well within the DL60's 60-watt capacity. The dummy load is ideal for CB radio testing, tuning, and troubleshooting without radiating signals that could interfere with other CB users. Do I need a dummy load if I have an SWR meter? Yes, dummy loads and SWR meters serve different purposes. SWR meters measure antenna system matching while connected to actual antennas. Dummy loads enable transmitter testing without antennas, allowing power output verification, radio functionality testing, and equipment troubleshooting without radiating RF energy. Professional installations use both tools for comprehensive radio system testing.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HVU-200 - High Performance HF/VHF/UHF 4-Band Mobile Communication Antenna Product Overview The HVU-200 is a professional-grade multi-band mobile communication antenna engineered for amateur radio operators requiring comprehensive frequency coverage across HF and VHF/UHF bands. This high-performance antenna delivers simultaneous operation on four frequency bands including 28.8MHz (10-meter HF), 52MHz (6-meter), 146MHz (2-meter VHF), and 435/445MHz (70-centimeter UHF), eliminating the need for multiple antennas or band-switching systems. The HVU-200 features impressive power handling capabilities with 200-watt SSB capacity on VHF/UHF bands and 120-watt capacity on HF bands, accommodating high-power amateur radio transceivers. With optimized gain characteristics including 4.5dBi on UHF and 1.8dBi on 2-meter VHF, plus low VSWR across all bands, this antenna ensures efficient signal transmission and reception. The compact 132cm overall length provides excellent multi-band performance while maintaining practical mounting height for mobile installations. Standard PL-259 connection ensures universal compatibility with amateur radio equipment. Key Features 4-Band Simultaneous Coverage - Single antenna operates across 28.8MHz, 52MHz, 146MHz, and 435/445MHz bands without requiring tuners or band switching, providing comprehensive amateur radio frequency coverage from HF through UHF bands. High Power Handling Capacity - Robust construction accommodates 200 watts SSB on 146/430-450MHz VHF/UHF bands and 120 watts SSB on 28.8/52MHz HF bands, supporting high-power amateur radio transceivers for extended-range communication. Optimized Multi-Band Gain - Engineered gain characteristics deliver 4.5dBi on 430-450MHz UHF band and 1.8dBi on 146MHz VHF band, providing enhanced signal strength and extended communication range across amateur radio frequencies. Low VSWR Performance - Precision-tuned antenna elements maintain low voltage standing wave ratio across all four bands, ensuring efficient power transfer from transmitter to antenna while protecting radio equipment from excessive reflected power. Compact Mobile Design - 132cm overall length provides practical mounting height for mobile vehicle installations while maintaining effective radiating elements for HF, 6-meter, 2-meter, and 70-centimeter amateur radio operations. Standard PL-259 Connection - Universal PL-259 coaxial connector provides direct compatibility with amateur radio transceivers and standard coaxial cables, enabling straightforward installation without requiring special adapters or connectors. Technical Specifications Frequency Coverage: Band 1: 28.8MHz (10-Meter HF) Band 2: 52MHz (6-Meter) Band 3: 146MHz (2-Meter VHF) Band 4: 435MHz or 445MHz (70-Centimeter UHF) Power Handling: 146/430-450MHz: 200W SSB Maximum 28.8/52MHz: 120W SSB Maximum Performance: Gain (430-450MHz): 4.5dBi Gain (146MHz): 1.8dBi VSWR: Low Across All Bands Physical: Overall Length: 132cm Connector: PL-259 Impedance: 50 Ohm (standard) Application: Amateur Radio Mobile Operations Multi-Band HF/VHF/UHF Communications Contest and DXing Activities Emergency Communications (EMCOMM) Field Day Operations Installation Notes The HVU-200 multi-band antenna mounts using standard mobile antenna bases or brackets compatible with PL-259 connections. Select mounting locations providing adequate clearance for the 132cm antenna height while ensuring ground plane requirements for optimal HF operation. For vehicle installations, roof-top mounting typically provides best performance across all bands, though alternative locations like trunk lips or tailgate mounts can be utilized with appropriate ground plane considerations. Connect the antenna directly to the mounting base's SO239 connector, ensuring the PL-259 connection is tightened hand-tight. Route coaxial cable from the antenna mount to the transceiver location, avoiding sharp bends that could damage cable or increase signal loss. Test VSWR on all four bands after installation to verify proper antenna performance. The low VSWR design should require no tuning adjustments. For optimal HF performance on 28.8MHz and 52MHz bands, ensure adequate vehicle ground plane or utilize ground strap connections. The antenna accommodates high power levels but verify your transceiver's output power remains within the antenna's rated capacity on each band. Frequently Asked Questions Can this antenna operate on all four bands simultaneously? Yes, the HVU-200 is designed for simultaneous multi-band operation, meaning you can switch between 28.8MHz, 52MHz, 146MHz, and 435/445MHz bands on your transceiver without requiring antenna tuners or band-switching devices. The antenna's internal matching system provides proper impedance on all four bands simultaneously. What does SSB power rating mean for FM operation? SSB (Single Sideband) power ratings typically represent continuous carrier power capacity. FM operation uses intermittent carrier transmission, so the antenna safely handles the rated SSB power for FM transmissions. The 200W SSB rating on VHF/UHF accommodates typical amateur FM transceivers operating 50-100 watts, while the 120W HF rating covers standard 100-watt HF transceivers. Will this antenna work with my dual-band VHF/UHF radio? Yes, the HVU-200 covers standard amateur 2-meter (146MHz) and 70-centimeter (435/445MHz) bands used by dual-band transceivers. The antenna also provides bonus coverage on 10-meter (28.8MHz) and 6-meter (52MHz) HF bands if your transceiver supports these frequencies or if you operate separate HF equipment. How does the 132cm length affect parking garage clearance? The 132cm antenna height is moderately tall for mobile installations. When mounted on typical vehicle roof heights, total vehicle height may exceed 2.2-2.4 meters. Consider removable antenna mounts or folding base options for vehicles requiring frequent parking garage access. The multi-band performance requires the 132cm radiating element length. Is a ground plane required for HF band operation? Yes, for optimal performance on HF bands (28.8MHz and 52MHz), adequate ground plane improves antenna efficiency. Vehicle metal roofs provide excellent ground planes. For non-metallic mounting locations, consider ground strap connections or utilize alternative HF-specific antennas. VHF/UHF bands (146MHz and 435/445MHz) are less dependent on ground plane but still benefit from proper mounting configurations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OPEK S34SA - Stainless Steel Medium Antenna Shock Spring Product Overview The OPEK S34SA is a professional-grade medium-duty stainless steel antenna shock spring designed to protect antennas up to 1.5 meters from impact damage during vehicle operation. This precision-engineered shock spring features robust 4mm stainless steel construction with 20mm diameter and 75mm length, providing optimal flexibility and impact absorption for medium-height antenna installations. The marine-grade stainless steel construction ensures long-term corrosion resistance in harsh Australian conditions including coastal environments, mining operations, and extreme weather exposure. The OPEK S34SA shock spring is ideal for protecting popular UHF CB antennas, two-way radio antennas, and communication equipment mounted on 4WD vehicles, commercial trucks, agricultural machinery, and marine vessels. The spring mechanism absorbs impact forces from low-hanging branches, garage entries, and rough terrain obstacles, preventing costly antenna damage and maintaining signal integrity during demanding off-road and commercial applications. Features & Benefits Robust 4mm Stainless Steel Construction Heavy-duty 4mm stainless steel wire construction provides superior strength and durability for medium-duty antenna applications up to 1.5 meters, offering reliable impact protection without premature spring fatigue or material failure under normal operating conditions. Marine-Grade Corrosion Resistance Premium stainless steel material delivers exceptional corrosion resistance in coastal, marine, and high-moisture environments, maintaining spring performance and structural integrity throughout extended service life in harsh Australian climatic conditions. Medium-Duty Antenna Protection Specifically engineered for antennas up to 1.5 meters in height, providing optimal spring rate and flexibility for common UHF CB antennas and communication equipment without over-compression or inadequate impact absorption. Compact 20mm x 75mm Dimensions Space-efficient 20mm diameter and 75mm length design fits standard antenna mounting configurations without excessive height addition, maintaining vehicle clearance while providing effective impact protection and flexible antenna movement. Universal Antenna Compatibility Standard threading accommodates most UHF CB antennas, two-way radio antennas, and communication equipment with conventional mounting systems, ensuring broad compatibility across OPEK, GME, Uniden, and other major antenna brands. Technical Specifications Specification Details Model OPEK S34SA Construction Material 4mm Stainless Steel Spring Diameter 20mm Spring Length 75mm Maximum Antenna Height Up to 1.5m Duty Rating Medium-Duty Thread Type Standard (Universal) Corrosion Rating Marine-Grade Stainless Steel Application UHF CB, Two-Way Radio, Communication Antennas Mounting Position Between Antenna Base and Mounting Bracket Operating Environment All-Weather, Coastal, Off-Road Colour Stainless Steel (Natural) Country of Origin Check Product Packaging Installation & Compatibility The OPEK S34SA shock spring installs between the antenna base and the mounting bracket using standard threading. The spring is compatible with most UHF CB antennas up to 1.5 meters including popular models such as the GME AE4018, Uniden AT870, and similar medium-height communication antennas. Professional installation is recommended for optimal performance and to ensure correct torque specifications are maintained during assembly. The shock spring is suitable for installation on 4WD vehicles, commercial trucks, utes, agricultural equipment, and marine vessels where antenna protection from impact damage is required. The 20mm diameter and 75mm length dimensions accommodate standard antenna mounting configurations without requiring modification to existing mounting hardware. For antennas exceeding 1.5 meters in height or applications requiring heavy-duty impact protection, consider upgrading to a heavy-duty shock spring with greater load capacity and spring rate specifications. Regular inspection of the shock spring for signs of wear, corrosion, or material fatigue is recommended as part of routine vehicle maintenance procedures. Frequently Asked Questions Q: What antenna heights is the OPEK S34SA shock spring suitable for? A: The OPEK S34SA is designed for antennas up to 1.5 meters in height, making it ideal for most UHF CB antennas and medium-height communication equipment. This includes popular models like the GME AE4018 (954mm) and Uniden AT870 (697mm). For antennas exceeding 1.5 meters, a heavy-duty shock spring with greater load capacity is recommended. Q: Is the OPEK S34SA suitable for coastal and marine environments? A: Yes, the OPEK S34SA features marine-grade stainless steel construction that provides excellent corrosion resistance in coastal, marine, and high-moisture environments. The stainless steel material maintains structural integrity and spring performance throughout extended service life in harsh Australian conditions. Q: Does the shock spring fit all antenna brands? A: The OPEK S34SA uses standard threading that is compatible with most UHF CB antennas and two-way radio antennas from major brands including OPEK, GME, Uniden, and others. The universal design accommodates conventional mounting systems without requiring adapters or modifications. Q: How does the shock spring protect my antenna? A: The shock spring absorbs impact forces from low-hanging branches, garage entries, and rough terrain obstacles by flexing and compressing when the antenna encounters resistance. This prevents the antenna from breaking or bending, maintaining signal integrity and avoiding costly antenna replacement. Q: Can I install the OPEK S34SA shock spring myself? A: The shock spring installs between the antenna base and mounting bracket using standard threading. While DIY installation is possible for mechanically-inclined users, professional installation is recommended to ensure correct torque specifications and optimal performance. Ensure the spring is properly tightened to prevent vibration-related loosening during operation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OPEK SWR-2 - SWR Meter with 300mm Patch Lead Product Overview The OPEK SWR-2 is a professional-grade Standing Wave Ratio (SWR) meter designed for HF amateur radio and shortwave communication applications operating between 1.7-30 MHz. This precision instrument features dual 200 DC-Micro ammeter indicators for simultaneous forward and reflected power monitoring, enabling accurate antenna system tuning and impedance matching for optimal transmission efficiency. The compact 88mm x 62mm x 80mm design includes a 300mm patch lead for convenient installation between transceiver and antenna feedline. The OPEK SWR-2 provides essential diagnostic capabilities for HF amateur radio operators, CB radio enthusiasts, and shortwave communication professionals requiring accurate SWR measurements to protect transmitter equipment and maximize radiated power. The 52Ω impedance configuration matches standard coaxial cable systems, while the 10-watt power measurement capability accommodates low-power QRP operations and portable field stations across the entire HF spectrum from 160 meters to 10 meters. Features & Benefits 1.7-30 MHz HF Coverage Complete frequency coverage across all HF amateur radio bands from 160 meters through 10 meters, including 80m, 40m, 20m, 15m, and 10m bands, enabling comprehensive antenna system analysis for shortwave communication, amateur radio operations, and CB installations. Dual 200 DC-Micro Ammeter Display Precision analog meter movements provide simultaneous monitoring of forward power and reflected power, allowing real-time SWR calculation and antenna tuning without switching between measurement modes, improving operational efficiency during field deployments. 52Ω Standard Impedance Engineered for 52-ohm impedance systems including RG-58, RG-8X, and RG-213 coaxial cables, ensuring accurate measurements with standard amateur radio antenna configurations and transmission line installations without impedance transformation requirements. 10-Watt Power Measurement Optimized for QRP (low-power) amateur radio operations up to 10 watts output, protecting sensitive meter movements from overload while providing accurate SWR readings for portable field stations, emergency communications, and low-power HF transceivers. Compact 88mm x 62mm x 80mm Design Space-efficient dimensions fit portable radio stations, mobile HF installations, and desktop operating positions without consuming valuable workspace, while the 300mm patch lead facilitates flexible positioning between transceiver and antenna tuner or feedline connection. ±5% Measurement Accuracy Industrial-grade precision provides reliable SWR readings within ±5% tolerance, delivering sufficient accuracy for antenna system optimization, resonance identification, and transmitter protection across amateur radio and shortwave communication applications. Technical Specifications Specification Details Model OPEK SWR-2 Impedance 52Ω Frequency Range 1.7 - 30 MHz Measurement Accuracy ±5% Indicator Type 200 DC-Micro Ammeters (Dual) Power Measurement Range 10 Watts Maximum Meter Type Analog (Forward & Reflected Power) Connectors SO-239 (UHF Female) Cable Compatibility 52Ω Coaxial (RG-58, RG-8X, RG-213) Included Patch Lead 300mm Dimensions (W x H x D) 88mm x 62mm x 80mm Weight Approximately 150g (meter only) Application HF Amateur Radio, Shortwave, CB Radio Operating Temperature Check Product Documentation Country of Origin Check Product Packaging Installation & Compatibility The OPEK SWR-2 installs in-line between the HF transceiver and antenna feedline using standard SO-239 (UHF female) connectors. The meter requires no external power source, operating entirely from the RF power passing through the measurement circuit. The included 300mm patch lead connects between the transceiver output and the SWR meter input, with the antenna feedline connecting to the meter's output connector. For accurate SWR measurements, ensure all coaxial connections are properly tightened and free from corrosion. The meter is compatible with 52-ohm antenna systems including HF dipoles, vertical antennas, end-fed wires, and mobile whip antennas operating within the 1.7-30 MHz frequency range. The 10-watt maximum power rating makes this meter ideal for QRP transceivers, portable field stations, and low-power amateur radio operations. When using the OPEK SWR-2, transmit briefly into a dummy load or antenna to observe meter deflection. Adjust antenna length or tuner settings to achieve minimum reflected power (SWR 1.5:1 or lower ideal). For power levels exceeding 10 watts, consider upgrading to a higher-power SWR meter to prevent meter damage. Professional installation and proper grounding practices are recommended for permanent station installations. Frequently Asked Questions Q: What frequency bands does the OPEK SWR-2 cover? A: The OPEK SWR-2 covers 1.7-30 MHz, which includes all HF amateur radio bands from 160 meters (1.8 MHz) through 10 meters (28-29.7 MHz). This includes the popular 80m, 40m, 20m, 15m, and 10m amateur bands, plus the 27 MHz CB radio band and shortwave listening frequencies. Q: Can I use the OPEK SWR-2 with 100-watt transceivers? A: No, the OPEK SWR-2 is rated for a maximum of 10 watts power measurement. Exceeding this power level will damage the sensitive meter movements. This meter is specifically designed for QRP (low-power) operations. For 100-watt transceivers, you need an SWR meter rated for at least 100-200 watts continuous power. Q: Does the SWR meter require batteries or external power? A: No, the OPEK SWR-2 is a passive device that operates entirely from the RF power passing through it during transmission. No batteries or external power source is required. Simply connect it in-line between your transceiver and antenna, and it will measure SWR when you transmit. Q: What type of connectors does the OPEK SWR-2 use? A: The OPEK SWR-2 uses standard SO-239 (UHF female) connectors on both input and output ports. These mate with PL-259 (UHF male) connectors commonly found on coaxial cables like RG-58, RG-8X, and RG-213. The included 300mm patch lead has the appropriate connectors for installation. Q: How do I read the SWR on the dual meter display? A: The OPEK SWR-2 features two analog meters showing forward power and reflected power. To calculate SWR, transmit at low power and note both meter readings. A high forward power reading with low reflected power indicates good SWR (1.5:1 or better). If both meters show similar readings, your SWR is poor (3:1 or higher) and antenna adjustment is required.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Pacific Aerials P5027 - 24V/12V Switchmode Converter Product Overview The Pacific Aerials P5027 is a professional-grade 24V to 12V switchmode power converter designed to operate 12V communications equipment in 24V vehicle electrical systems including trucks, buses, and aircraft. This robust converter delivers 10 amperes continuous output with 14 ampere peak capacity, providing stable regulated 12V DC power from 24V sources for UHF CB radios, two-way communication systems, and mobile electronics. The compact switchmode design offers superior efficiency, minimal heat generation, and lightweight construction for easy installation in commercial vehicle applications. The P5027 converter is essential for fleet operators, transport companies, and commercial vehicle owners requiring reliable operation of 12V communication equipment in 24V electrical environments. The switchmode technology provides clean, regulated power output with minimal electromagnetic interference, protecting sensitive radio equipment while maintaining stable voltage under varying load conditions. The rugged construction ensures dependable performance in demanding commercial transport applications across Australian mining, logistics, agriculture, and emergency services sectors. Features & Benefits 24V to 12V Voltage Conversion Enables operation of standard 12V communications equipment including UHF CB radios, two-way radios, and mobile electronics in 24V vehicle electrical systems without modification to existing 12V devices, eliminating equipment replacement costs in commercial vehicle upgrades. 10A Continuous, 14A Peak Output Delivers 10 amperes continuous power with 14 ampere peak capacity, accommodating power requirements of most UHF CB radios and communication systems including transmit peaks, antenna tuners, and accessory devices without voltage drop or power interruption. Switchmode Technology Advanced switchmode power conversion provides superior efficiency (typically 85-90%), minimal heat generation, reduced weight compared to linear regulators, and stable output voltage regulation under varying input voltages and load conditions common in vehicle electrical systems. Compact Lightweight Design Space-efficient construction with minimal weight facilitates easy installation in tight mounting locations including cab dashboards, under-seat areas, and equipment racks without consuming valuable space in commercial vehicle interiors or requiring reinforced mounting structures. Commercial Vehicle Applications Engineered for reliable operation in trucks, buses, coaches, and aircraft electrical systems, providing robust performance in demanding commercial transport environments with vibration resistance, temperature tolerance, and electrical noise immunity essential for fleet operations. Reliable Regulated Output Maintains stable 12V output voltage regulation within tight tolerances regardless of input voltage variations, load changes, or environmental conditions, protecting sensitive communications equipment from voltage fluctuations and ensuring consistent radio performance. Technical Specifications Specification Details Model Pacific Aerials P5027 Input Voltage 24V DC Output Voltage 12V DC Continuous Current 10 Amperes Peak Current 14 Amperes Conversion Type Switchmode Size Small/Compact Weight Lightweight Applications Trucks, Buses, Aircraft, Commercial Vehicles Suitable Equipment 12V Communications Equipment Installation & Compatibility The Pacific Aerials P5027 installs between the 24V vehicle power source and 12V communications equipment, typically mounted in accessible locations such as under-dash areas, equipment racks, or behind cab panels. Professional installation by qualified automotive electricians or electronics technicians is strongly recommended to ensure correct polarity connections, adequate fusing, proper grounding, and secure mounting in commercial vehicle environments. The converter is compatible with most 12V UHF CB radios, two-way radio systems, and mobile communications equipment operating within the 10-ampere continuous power requirement. Typical applications include GME, Uniden, and other UHF CB radio installations in 24V trucks and buses. Installation should include appropriate input and output fusing, secure wire routing away from heat sources, and proper ventilation around the converter to ensure adequate heat dissipation. When selecting mounting locations, ensure adequate clearance for heat dissipation and protection from moisture, excessive vibration, and physical damage. The converter requires connection to both vehicle chassis ground and clean 24V supply from the vehicle electrical system. Professional installers should verify input voltage stability, measure output voltage regulation under load, and confirm proper operation before final installation completion. Frequently Asked Questions Q: Can the P5027 power a 5-watt UHF CB radio in a 24V truck? A: Yes, the P5027 is specifically designed for this application. A typical 5-watt UHF CB radio draws approximately 0.5-1 ampere on receive and 1.5-2 amperes during transmission, well within the P5027's 10-ampere continuous capacity. The 14-ampere peak capacity easily handles transmit bursts and ensures stable voltage during high-power operation. Q: Is professional installation required for the P5027 converter? A: Professional installation by qualified automotive electricians or electronics technicians is strongly recommended. Proper installation requires correct polarity connections, appropriate fusing on both input and output circuits, secure mounting, and adequate ventilation. Incorrect installation can damage the converter, communications equipment, or vehicle electrical systems. Q: What happens if I exceed the 10-ampere continuous rating? A: Exceeding the 10-ampere continuous rating may cause the converter to overheat, enter thermal protection mode (if equipped), or experience premature failure. Always verify the total current draw of connected equipment including radios, accessories, and peak transmission loads to ensure operation within the P5027's specifications. Q: Can I use the P5027 to power other 12V devices besides communications equipment? A: While the P5027 is designed for communications equipment, it can power other 12V devices provided the total current draw remains within 10 amperes continuous. However, some devices may generate electrical noise that interferes with radio reception. For best results, use the converter exclusively for communications equipment as intended. Q: Does the P5027 require any maintenance? A: Switchmode converters typically require minimal maintenance. Periodically inspect connections for corrosion, ensure mounting remains secure, verify fuses are intact, and check for signs of overheating or damage. Keep the converter clean and ensure adequate ventilation. If radio performance degrades or unusual sounds/odors occur, have the converter inspected by a qualified technician.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Pacific Aerials P5027M - Voltage Reducer 10A with Memory Product Overview The Pacific Aerials P5027M is a professional-grade 24V to 12V switchmode voltage reducer featuring memory function and dual independent circuits for operating 12V communications equipment in 24V vehicle electrical systems. This advanced converter delivers 10 amperes output capacity with intelligent memory functionality that retains power state settings across ignition cycles, providing convenient automatic operation for UHF CB radios, two-way communication systems, and mobile electronics in trucks, buses, and commercial vehicles. The dual circuit configuration enables independent power management for multiple devices with separate control and protection. The P5027M voltage reducer is essential for fleet operators and commercial transport professionals requiring reliable power conversion with enhanced functionality beyond standard converters. The memory feature eliminates manual power cycling of connected equipment, while the dual circuit design provides flexibility for powering multiple devices with independent control. The compact switchmode technology delivers efficient power conversion with minimal heat generation, making it ideal for permanent installations in commercial vehicle cabins where space and thermal management are critical considerations. Features & Benefits Memory Function Intelligent memory circuitry retains power state settings across vehicle ignition cycles, automatically restoring previous operating conditions when the vehicle is restarted, eliminating the need to manually power cycle connected communications equipment and improving operational efficiency for commercial drivers. Dual Independent Circuits Two separate output circuits enable independent power management for multiple 12V devices, providing isolated control and protection for each connected equipment, allowing simultaneous operation of UHF CB radio and accessory devices with independent switching and circuit protection. 24V to 12V Switchmode Conversion Advanced switchmode technology provides efficient voltage reduction from 24V commercial vehicle electrical systems to regulated 12V output, minimizing heat generation and power loss while maintaining stable voltage regulation for sensitive communications equipment operation. 10 Ampere Output Capacity Delivers 10 amperes total output current across both circuits, accommodating power requirements of UHF CB radios, two-way communication systems, and accessory devices including transmit power peaks without voltage drop or performance degradation. Compact 0.5kg Design Lightweight construction weighing just 500 grams facilitates easy installation in tight mounting locations including cab dashboards, under-seat areas, and equipment racks without requiring reinforced mounting structures or consuming valuable space in commercial vehicle interiors. 12 Month Warranty Coverage Manufacturer-backed 12 month warranty provides confidence in product reliability and quality, protecting investment in power conversion infrastructure for commercial vehicle communication systems with comprehensive warranty support for manufacturing defects. Technical Specifications Specification Details Model Pacific Aerials P5027M Input Voltage 24V DC Output Voltage 12V DC Output Current 10 Amperes Total Number of Circuits 2 Independent Circuits Conversion Type Switchmode Memory Function Yes (Retains Power State) Weight 0.5 kg Warranty 12 Months Applications Trucks, Buses, Commercial Vehicles Suitable Equipment 12V Communications Equipment Installation & Compatibility The Pacific Aerials P5027M installs between the 24V vehicle power source and 12V communications equipment, typically mounted in accessible locations such as under-dash areas, equipment racks, or behind cab panels. Professional installation by qualified automotive electricians or electronics technicians is strongly recommended to ensure correct polarity connections, adequate fusing on both input and output circuits, proper grounding, and secure mounting in commercial vehicle environments. The dual circuit configuration allows independent connection of two separate 12V devices, such as a UHF CB radio on circuit one and an accessory device on circuit two. Each circuit can be independently controlled and protected, providing flexibility for complex installation requirements. The memory function automatically restores the previous power state when the vehicle ignition is cycled, eliminating the need to manually power on connected equipment after each vehicle start. When planning installations, distribute the 10-ampere total capacity appropriately across both circuits based on equipment power requirements. Typical configurations include 5-6 amperes for the primary UHF CB radio circuit and 4-5 amperes for accessory devices. Installation should include appropriate input and output fusing for each circuit, secure wire routing away from heat sources, and proper ventilation around the converter to ensure adequate heat dissipation during operation. Frequently Asked Questions Q: What does the memory function do on the P5027M? A: The memory function retains the power state of connected equipment across vehicle ignition cycles. When you turn off your truck and later restart it, the P5027M automatically restores power to previously active circuits without requiring manual intervention. This eliminates the need to manually power on your UHF CB radio or other communications equipment every time you start the vehicle. Q: How is the 10-ampere capacity divided between the two circuits? A: The 10-ampere capacity is shared across both circuits, not 10 amperes per circuit. You need to distribute the total 10-ampere capacity between circuit one and circuit two based on your equipment requirements. For example, you might allocate 6 amperes to a UHF CB radio on circuit one and 4 amperes to accessory devices on circuit two. Q: Can I use both circuits simultaneously? A: Yes, both circuits can operate simultaneously as long as the combined current draw does not exceed the 10-ampere total capacity. The dual independent circuits allow separate devices to be powered at the same time with individual control and protection for each circuit. Q: Is the P5027M compatible with all 12V communications equipment? A: The P5027M is compatible with most 12V UHF CB radios, two-way communication systems, and mobile electronics that operate within the 10-ampere total capacity. Always verify the current requirements of your specific equipment, including transmit peaks, to ensure operation within the converter's specifications. Q: Does the 12-month warranty cover installation issues? A: The 12-month manufacturer warranty covers manufacturing defects in materials and workmanship. Damage caused by incorrect installation, improper use, or exceeding rated specifications is typically not covered. Professional installation is recommended to ensure proper operation and maintain warranty coverage. Consult warranty documentation for specific terms and conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Powertech MP3098 - 13.8V 20A DC Linear Power Supply Product Overview The Powertech MP3098 is a professional-grade 13.8V DC linear power supply delivering 20 amperes continuous output with 22 ampere maximum headroom capacity for powering amateur radio transceivers, UHF CB base stations, and communications equipment. This transformer-based power supply features linear regulation circuitry providing clean, low-noise DC power output ideal for sensitive radio equipment requiring stable voltage without switching noise interference. The 300-watt capacity with 4mm banana binding post outputs makes this unit suitable for both bench testing applications and permanent base station installations. The MP3098 linear power supply is essential for amateur radio operators, electronics technicians, and communications professionals requiring reliable 13.8V DC power for HF transceivers, VHF/UHF radios, and test equipment. The transformer-based linear design eliminates switching noise common in switchmode power supplies, ensuring interference-free operation critical for radio reception and transmission. The robust construction with internal cooling fan, short circuit protection, and fused input provides dependable performance for continuous duty applications in workshop, laboratory, and home station environments. Features & Benefits 13.8V DC Regulated Output Precision-regulated 13.8V DC output voltage matches standard operating voltage for amateur radio transceivers, CB base stations, and communications equipment, providing optimal performance without voltage adjustment requirements and protecting sensitive radio circuits from overvoltage conditions. 20A Continuous with 22A Maximum Headroom Delivers 20 amperes continuous output current with 22 ampere maximum headroom capacity, accommodating transmit power peaks from HF and VHF/UHF transceivers including high-power SSB and FM transmission modes without voltage sag or current limiting during peak demand periods. Linear Transformer-Based Design Traditional transformer-based linear regulation eliminates switching frequency noise and electromagnetic interference associated with switchmode power supplies, providing clean DC output essential for sensitive radio receivers and ensuring interference-free operation across HF, VHF, and UHF frequency ranges. 4mm Banana Binding Post Outputs Professional-grade 4mm banana binding post terminals provide secure high-current connections with excellent electrical contact, accommodating standard test leads, power cables, and permanent wiring installations with reliable low-resistance connections for sustained high-current operation. Short Circuit Protection Integrated output short circuit protection safeguards the power supply from damage during wiring errors, equipment faults, or accidental short circuits, automatically limiting output current and protecting internal components from overload conditions without requiring fuse replacement. Internal Cooling Fan Built-in cooling fan provides active thermal management during high-current operation and elevated ambient temperatures, ensuring reliable continuous duty performance by maintaining safe operating temperatures for transformer, regulation circuitry, and output components throughout extended operating sessions. Technical Specifications Specification Details Model Powertech MP3098 (SMP3098) Output Voltage 13.8V DC Continuous Current 20 Amperes Maximum Current 22 Amperes (Headroom) Power Rating 300 Watts Power Supply Type Linear (Transformer with Regulation Circuit) Output Connection 4mm Banana Binding Posts Power Indicator LED Cooling Internal Fan Input Protection Fused Output Protection Short Circuit Protection Applications Bench Testing, Lab Use, Base Station Power Suitable Equipment Amateur Radio, CB Base Stations, Communications Installation & Compatibility The Powertech MP3098 operates from standard 240V AC mains power and requires adequate ventilation for proper cooling fan operation during extended use. Install the power supply on a stable bench surface or rack mount location with clearance around ventilation openings to ensure unrestricted airflow for thermal management. Connect equipment to the 4mm banana binding posts observing correct polarity, with the positive terminal connected to the equipment positive input and negative terminal to equipment ground/negative. The MP3098 is compatible with amateur radio transceivers, UHF CB base stations, VHF/UHF mobile radios, and communications equipment operating from 13.8V DC power sources. Typical applications include HF transceivers drawing 15-20 amperes during SSB transmission, VHF/UHF mobile radios requiring 10-15 amperes for FM operation, and multiple low-power devices operating simultaneously from the 20-ampere capacity. When connecting equipment, verify total current requirements including transmit peaks do not exceed the 20-ampere continuous rating. The 22-ampere maximum headroom provides brief overload capacity for transmission peaks, but sustained operation above 20 amperes may cause thermal protection activation or reduced lifespan. Use appropriately rated power cables with secure connections to banana binding posts to minimize voltage drop and ensure reliable high-current delivery. Frequently Asked Questions Q: Can the MP3098 power a 100-watt HF transceiver? A: Yes, the MP3098 is well-suited for 100-watt HF transceivers. A typical 100-watt HF radio draws approximately 5-8 amperes on receive and 20-22 amperes during peak SSB transmission. The MP3098's 20-ampere continuous rating with 22-ampere maximum headroom accommodates these power requirements, though operation at maximum output may engage thermal protection during extended transmission periods. Q: What is the difference between linear and switchmode power supplies? A: Linear power supplies like the MP3098 use transformer-based regulation, providing clean DC output without switching noise but with lower efficiency and heavier weight. Switchmode power supplies are lighter and more efficient but generate high-frequency switching noise that can interfere with sensitive radio reception. For amateur radio and communications applications, linear supplies offer superior performance due to noise-free operation. Q: Does the internal cooling fan run continuously? A: Fan operation depends on thermal load and internal temperature. During light loads (under 10 amperes), the fan may cycle on and off or run at reduced speed. During heavy loads approaching 20 amperes or elevated ambient temperatures, the fan runs continuously to maintain safe operating temperatures and prevent thermal overload. Q: Can I use the MP3098 for mobile radio installations? A: The MP3098 is designed as a bench and lab power supply operating from 240V AC mains, not for mobile vehicle installations. For mobile radio installations requiring 13.8V power from vehicle electrical systems, use dedicated mobile power supplies or DC-DC converters designed for automotive environments. Q: What happens if I short circuit the output? A: The MP3098 features short circuit protection that automatically limits output current during short circuit conditions, protecting the power supply from damage. When the short circuit is removed, normal operation resumes without requiring fuse replacement or manual reset. However, avoid prolonged short circuit conditions as they generate excessive heat in protection circuitry.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Offers A Range Of Rugged Heavy Duty Radome Antennas The perfect blend of style and performance. Replacement Fibreglass Antenna Whip – White. Suits AS001 Base Assembly. Features: White Fibreglass Radome 2.1dBi Gain Whip Length: 495mm What's in the Box: Whip only Legendary Products & Support From Authorized Dealers When you choose GME, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GME dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GME's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized GME dealer today!

Read more less

The Victron Energy CIN242160000 Inverter Compact 24/1600 230V VE.Bus delivers reliable, high-efficiency pure sine wave power for professional use. Designed for off-grid systems, backup power, and mobile applications, this inverter ensures stable electricity for sensitive electronics, appliances, and demanding equipment. With its compact size and robust build, it’s the perfect balance between performance and portability. Whether for residential backup, RVs, boats, or remote installations, the Inverter Compact guarantees continuous, clean energy you can trust. Victron Energy CIN242160000 Key Benefits & Features: Pure Sine Wave Output – Protects sensitive electronics and ensures smooth performance for all appliances. High Efficiency Design – Minimizes energy loss, maximizing power availability and battery life. Professional-Grade Reliability – Engineered for heavy-duty, continuous operation in demanding environments. Wide Application Range – Ideal for off-grid homes, RVs, boats, work sites, and emergency backup systems. Flexible Power Options – Available in 12V or 24V models, from 1200VA up to 2000VA. Compact & Durable Build – Saves space while offering rugged durability for long-term use. VE.Bus Connectivity – Seamless integration with Victron systems for smarter energy management. Tech Specifications: Model: Inverter Compact C24/1600 Input Voltage Range (VDC): 19 – 33 V (24V model) Output Voltage: 230 VAC ± 2 % Output Frequency: 50 Hz ± 0.1 % Continuous Output Power (25°C): 1600 VA / 1300 W Continuous Output Power (40°C): 1200 W Continuous Output Power (65°C): 800 W Peak Power: 3000 W (for startup surges and demanding loads) Max Efficiency (24V model): Up to 94% – reduces energy waste and extends battery life Zero Load Power: 10 W (24V) | AES mode: 8 W | Search mode: 3 W Operating Temperature: -40 °C to +65 °C (fan-assisted cooling) Humidity: Up to 95% (non-condensing) – ideal for marine and off-grid environmentsMaterial & Colour: Rugged aluminium, blue (RAL 5012) Protection Category: IP21 – resistant to dust and touch ingress Battery Connection: Pre-fitted 1.5 m battery cables included AC Connection: G-ST18i plug for easy installation Dimensions (HxWxD): 375 x 214 x 110 mm – compact and space-savingSafety Standard: EN 60335-1 EMC Standards: EN 55014-1 / EN 55014-2 – tested for emission and immunity Frequently Asked Questions What is the Victron Energy CIN242160000 Inverter Compact used for?This inverter is designed for off-grid systems, backup power, RVs, boats, and professional applications where reliable pure sine wave power is needed. It ensures stable electricity for sensitive electronics and appliances. Can this inverter power household appliances?Yes. With 1600 VA / 1300 W continuous power and a 3000 W peak capacity, it can handle most household electronics, lights, laptops, TVs, fridges, and smaller appliances. What makes the Victron Inverter Compact different from other inverters?It combines high efficiency (up to 94%), pure sine wave output, and VE.Bus communication for advanced system integration. Unlike basic inverters, it’s built for professional-duty, long-term performance. Can I use this inverter for solar power systems?Absolutely. The Inverter Compact integrates seamlessly with solar setups and can be combined with Victron charge controllers, batteries, and monitoring systems for a complete off-grid solution. Is the Victron Compact Inverter suitable for marine or RV use?Yes. Its rugged aluminium build, wide operating temperature (-40 to +65°C), and compact size make it perfect for boats, campers, and mobile applications. What protections are built into this inverter?It features a comprehensive protection suite against overload, short circuit, overheating, and incorrect battery voltage, ensuring safe operation. Can I monitor the inverter remotely?Yes. Through VE.Bus connectivity, the inverter can be linked to Victron monitoring tools, enabling remote control, system integration, and parallel/three-phase setups. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Unlock Reliable Power Anywhere – Victron Orion XS 1400 DC-DC Battery Charger Engineered for ultimate battery-to-battery charging, the Victron Orion XS 1400 delivers unmatched performance for dual-battery setups. Perfect for vehicles, boats, and off-grid systems, it ensures your auxiliary batteries are charged efficiently, safely, and consistently, even with intelligent alternators. Victron Energy ORI242417040 Key Features & Benefits: Optimized Battery Charging: Maintains peak performance and prolongs battery life in 12V, 24V, or mixed-voltage systems. Dual-Battery Ready: Perfect for vehicles with main and auxiliary battery setups, ensuring both are fully powered. Intelligent Alternator Compatible: Works seamlessly without overloading your vehicle’s charging system. High Efficiency & Safety: Advanced thermal management prevents overheating and guarantees reliable operation in any environment. Compact, Durable Design: Lightweight and rugged, built to withstand vibrations, shocks, and harsh conditions. Easy Installation: Intuitive wiring and setup mean you can get your system running faster and hassle-free. Technical Specifications: Input Voltage Range: 9 – 35 V – Compatible with a wide range of vehicles and systems. Output Voltage Adjust Range: 10 – 35 V – Flexible to match battery requirements. Output Voltage Tolerance: ±0.25% – Ensures precise, stable charging. Output Voltage Noise: 10 mV rms – Ultra-smooth power for sensitive electronics. Input & Output Current Setting Range: 1 – 50 A – Customizable for various battery capacities. Maximum Constant Short-Circuit Current: 50 A – Reliable protection under extreme conditions. Continuous Output Power (up to 40°C): 1400 W – High-power performance for demanding setups. Maximum Efficiency: 98.5% – Minimize energy loss, maximize battery charging speed. No-Load Current Consumption: <100 mA – Energy-efficient when idle. Standby Current Consumption: <1.5 mA – Minimal drain when not in use. Power Supply Mode: Yes – Output voltage adjustable via VictronConnect App. Communication & Connectivity: VictronConnect App / Bluetooth Smart: Yes – Monitor and configure your charger remotely. VE.Smart Networking: Yes – Integrate with smart Victron systems effortlessly. VE.Direct (including DVCC): Yes – Advanced system control and monitoring. Environmental & Mechanical: Operating Temperature Range: -20 to +60°C (derating 1.5% per °C above 40°C) – Reliable in extreme conditions. Humidity Resistance: 95%, non-condensing – Safe for marine and off-grid environments. Maximum Altitude: 2000 m – Perfect for high-altitude vehicles and installations. Pollution Degree: PD2 Overvoltage Category: OVC1 DC Connection: Screw terminals – Easy, secure installation. Maximum Cable Cross-Section: 4AWG (21.2 mm²) Protection Category: IP65 – Dust and water-resistant for rugged environments. Standards & Compliance: Safety: IEC 62477-1 – Ensuring top-tier electrical safety. EMC: EN 300 328, EN 301 489-1, EN 301 489-17, FCC 15B, ICES-003 – All pending Automotive Directive: ECE R10-6 – All pending Frequently Asked Questions What vehicles or systems is the Orion XS 1400 compatible with?The Orion XS 1400 works with 12V, 24V, and mixed-voltage systems, making it ideal for cars, trucks, RVs, boats, and off-grid setups with dual-battery configurations. Can I use the Orion XS 1400 with an intelligent alternator?Yes! It’s specifically designed to safely charge auxiliary batteries without overloading modern intelligent alternators. How efficient is the Orion XS 1400?The charger operates at up to 98.5% efficiency, minimizing energy loss and ensuring fast, reliable battery charging. Is the charger safe in harsh conditions?Absolutely. With an IP65 protection rating, it’s resistant to dust and water, operates from -20°C to +60°C, and can handle high humidity and altitudes up to 2000 m. Can I monitor and configure the charger remotely?Yes! Use the VictronConnect App with Bluetooth to adjust settings, monitor battery status, and optimize performance from your smartphone or tablet. Does the Orion XS 1400 support advanced system integration?Yes, it’s compatible with VE.Smart Networking and VE.Direct (including DVCC), allowing seamless integration into larger Victron energy setups. How easy is installation?The charger uses secure screw terminals and supports cables up to 4AWG (21.2 mm²), making installation straightforward and reliable. Can it be used as a standalone power supply?Yes, the output voltage can be set via the VictronConnect App, allowing it to function as a flexible DC power supply for various devices. Will it prolong my battery life?Yes, the Orion XS 1400 provides optimized battery-to-battery charging, reducing strain and extending the lifespan of both starter and auxiliary batteries. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less