GMF4x4 1015-Strut VW Amarok 2023+ Bonnet Strut Kit with Passenger and Driver Side LED Brackets A bonnet strut kit for the VW Amarok 2023+ with both passenger and driver side LED brackets incorporated, combining effortless bonnet operation with dual bonnet LED light mounts in a single kit. All hardware and mounts included. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 1015-Strut is a bonnet strut kit for the VW Amarok 2023+ featuring integrated passenger side and driver side LED light brackets. The kit uses GMF4x4's strongest 3-point connection bracket design and incorporates both LED mounts directly into the strut assembly for a clean, combined installation. All hardware and mounts are included. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The unique 3-point connection bracket design provides the strongest strut mount available for the VW Amarok 2023+ while incorporating both passenger and driver side LED light mounting positions. This eliminates the need for separate bonnet LED bracket installations, keeping the setup clean and integrated. All hardware and mounts are included. Technical Specs Specification Detail SKU 1015-Strut Brand GMF4x4 Compatible Vehicle VW Amarok 2023+ Kit Contents Bonnet Strut Kit with Passenger and Driver Side LED Brackets Incorporated Bracket Design 3-Point Connection UHF Bracket Not Included LED Bracket Passenger Side and Driver Side (incorporated) Included All Hardware and Mounts Origin Made in Australia Compatible With VW Amarok 2023+ Frequently Asked Questions Are LED lights included with this kit? No. The 1015-Strut includes the strut kit with passenger and driver side LED brackets incorporated. LED lights are a separate purchase. Please check with us for compatible bonnet LED light options. What makes the 3-point connection design stronger than standard strut mounts? GMF4x4's unique 3-point connection spreads the mounting load across three points rather than a single pivot, significantly increasing the rigidity and strength of the strut bracket and reducing stress on the bonnet hinge area during operation. What is the difference between this kit and the UHF bracket variants? The 1015-Strut incorporates LED light brackets on both sides rather than UHF antenna brackets. If you require UHF bracket integration, the 1012-Strut (passenger UHF), 1013-Strut (driver UHF), or 1014-Strut (dual UHF) are the relevant variants. Please check our listings for the configuration that suits your setup. Is all installation hardware included? Yes. All hardware and mounts required for installation are included in the kit. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 SG-2004 Ford Ranger Raptor 2022+ Rear Shock Protection Guard Pair A heavy-duty 5mm textured black steel rear shock protection guard pair designed specifically for the Ford Ranger Raptor 2022+, bolting directly to the factory mounting points for full front, side, and underneath shock coverage in approximately 5 minutes. Proudly made in Australia by GMF4x4. Please note: This guard is designed for the Ford Ranger Raptor ONLY. It is not compatible with other Ranger variants. Product Overview The GMF4x4 SG-2004 is a pair of rear shock protection guards engineered specifically for the Ford Ranger Raptor 2022+. Protecting the rear shocks from off-road damage can save thousands in parts and repairs, and prevent extended dealer wait times on non-stock components. The guards are designed to slip over and bolt directly into place using the factory mounting points, requiring no drilling and taking approximately 5 minutes to install. The 5mm textured black steel construction with welded design significantly increases rigidity, and each guard provides full coverage across the front, sides, and underneath of the rear shock. The pack includes a pair of guards covering both sides of the vehicle. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The 5mm textured black steel welded construction provides a rigid, heavy-duty guard that fully covers the front, sides, and underside of each rear shock, protecting against rocks, debris, and off-road impacts that could cause costly damage requiring dealer repair and long parts wait times. The slip-on design uses factory mounting points for a secure, vehicle-specific fit with no drilling into the vehicle. Installation takes approximately 5 minutes. The textured black steel finish provides a durable, corrosion and chip-resistant surface suited to harsh off-road and outdoor environments. Technical Specs Specification Detail SKU SG-2004 Brand GMF4x4 Compatible Vehicle Ford Ranger Raptor 2022+ ONLY Pack Contents 1 Pair (2 Guards) Material 5mm Textured Black Steel Construction Welded Coverage Front, Side and Underneath Shock Mounting Method Factory Mounting Points Drilling Required No Installation Time Approx. 5 minutes Origin Made in Australia Compatible With Ford Ranger Raptor 2022+ (ONLY) Not compatible with other Ford Ranger variants. Frequently Asked Questions Does this guard fit standard Ford Ranger models other than the Raptor? No. The SG-2004 is designed exclusively for the Ford Ranger Raptor 2022+. It is not compatible with other Ranger variants. Please check with us if you are unsure of your specific model before purchasing. Does installation require drilling into the vehicle? No. The SG-2004 slips over and bolts directly to the factory mounting points using the existing hardware. No drilling or modification to the vehicle is required. How many guards are included? The SG-2004 is sold as a pair. Two guards are included, covering both rear shocks on the vehicle. Why is protecting the rear shocks important for off-road driving? The rear shocks on the Ford Ranger Raptor are exposed to rocks, debris, and impact during off-road driving. Damage to the shock absorbers or their mounting hardware can be expensive to repair and may result in extended wait times for non-stock parts at the Ford dealer. The SG-2004 provides full front, side, and underside coverage to prevent this damage before it occurs. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 CV-2006 Ford Ranger 2022+ Steering Arm Guard A purpose-built steering arm guard for the Ford Ranger 2022+, bolting directly to the factory mounting points to protect the steering boot and assembly from off-road damage and avoid costly dealer wait times. Installs in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 CV-2006 is a steering arm guard engineered specifically for the Ford Ranger 2022+. The guard bolts directly to the factory mounting points using the existing hardware, requiring no drilling and taking approximately 5 minutes to install. By protecting the steering boot and steering assembly from rocks and debris during off-road driving, the CV-2006 helps avoid damage that can put the vehicle off the road while waiting on replacement parts. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The CV-2006 bolts directly to the factory mounting points for a secure, vehicle-specific fit with no drilling into the vehicle. Protecting the steering boot and assembly from off-road impact prevents damage to a critical steering component that can be costly to repair and may require extended dealer wait times for non-stock parts. Installation takes approximately 5 minutes. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Technical Specs Specification Detail SKU CV-2006 Brand GMF4x4 Compatible Vehicle Ford Ranger 2022+ Guard Type Steering Arm Guard Mounting Method Factory Mounting Points Drilling Required No Installation Time Approx. 5 minutes Origin Made in Australia Compatible With Ford Ranger 2022+ Frequently Asked Questions Does installation require drilling into the vehicle? No. The CV-2006 bolts directly to the factory mounting points using the existing hardware. No drilling or modification to the vehicle is required. Why is protecting the steering arm and boot important for off-road driving? The steering boot and steering assembly are exposed components vulnerable to rocks, debris, and impact during off-road driving. Damage to the steering boot can allow dirt and moisture into the steering assembly, leading to premature wear or failure that may require dealer repair and extended wait times for non-stock replacement parts. What material is this guard made from? Your product data does not specify the material for this guard. Please contact us for material details before purchasing. Is this guard compatible with the Ford Ranger Raptor? Your product data specifies the Ford Ranger 2022+ but does not confirm or exclude the Raptor variant. Please check with us to confirm compatibility with your specific Ranger model before purchasing. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 DG-2007 BLK Ford Raptor Next Gen and RA Rear Differential E-Locker Guard Black A heavy-duty 3mm textured black steel rear differential E-Locker protection guard designed specifically for the Ford Raptor Next Gen and RA, bolting directly to the factory fasteners for full front, side, and underneath differential coverage in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 DG-2007 BLK is a rear differential E-Locker protection guard engineered specifically for the Ford Raptor Next Gen and RA. Protecting the rear diff E-Locker from off-road damage can save thousands in parts and repairs, and prevent extended dealer wait times on non-stock components. The guard is designed to slip over the differential and bolt directly into place using the existing factory fasteners, requiring no drilling and taking approximately 5 minutes to install. The 3mm textured black steel construction with welded design significantly increases rigidity, and the guard provides full coverage across the front, sides, and underneath of the differential. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The 3mm textured black steel welded construction provides a rigid, heavy-duty guard that fully covers the front, sides, and underside of the rear differential E-Locker, protecting against rocks, debris, and off-road impacts that could cause costly damage requiring dealer repair and long parts wait times. The slip-on design uses factory fasteners for a secure, vehicle-specific fit with no drilling into the vehicle. Installation takes approximately 5 minutes. The textured black steel finish provides a durable, corrosion and chip-resistant surface suited to harsh off-road and outdoor environments. Technical Specs Specification Detail SKU DG-2007 BLK Brand GMF4x4 Compatible Vehicle Ford Raptor Next Gen / Ford Raptor RA Colour Black Material 3mm Textured Black Steel Construction Welded Coverage Front, Side and Underneath Differential Mounting Method Factory Fasteners Drilling Required No Installation Time Approx. 5 minutes Origin Made in Australia Compatible With Ford Raptor Next Gen Ford Raptor RA Frequently Asked Questions Does installation require drilling into the vehicle? No. The DG-2007 BLK slips over the differential and bolts directly to the factory fasteners using the existing hardware. No drilling or modification to the vehicle is required. Why is protecting the rear diff E-Locker important for off-road driving? The rear differential E-Locker is an exposed component vulnerable to impact from rocks and debris during off-road driving. Damage to the E-Locker unit or its wiring can be expensive to repair and may require extended dealer wait times for non-stock parts. The DG-2007 BLK provides full front, side, and underside coverage to prevent this damage before it occurs. Is this guard compatible with the standard Ford Ranger (non-Raptor)? The DG-2007 BLK is designed specifically for the Ford Raptor Next Gen and RA. Compatibility with other Ranger variants is not confirmed. Please check with us if you have a non-Raptor model before purchasing. Is a stainless steel version available? Please check with us for stainless steel finish availability for the DG-2007 guard. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2014-FG-KING Toyota LandCruiser LC300 Fuel Filter Guard Suits King Shocks A 3mm powder coated steel fuel filter protection guard designed specifically for the Toyota LandCruiser LC300, engineered to fit around King LC300 shocks and provide full coverage protection for the plastic fuel filter and housing from off-road damage. Installs in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 2014-FG-KING is a fuel filter protection guard engineered specifically for the Toyota LandCruiser LC300. The guard covers and protects the plastic fuel filter and housing from rocks, debris, and off-road impacts, providing full coverage to prevent damage to a component that is costly to replace and difficult to source quickly. This guard is designed to fit around King LC300 shocks. Hardware and instructions are included for a straightforward installation taking approximately 5 minutes. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. What's in the Box 3mm Steel Powder Coated Black Guard Hardware and Installation Instructions Features & Benefits The 3mm steel powder coated black construction provides a rigid, durable guard capable of withstanding off-road rock and debris strikes without deforming, protecting the plastic fuel filter and housing underneath. Full coverage wraps around the filter for comprehensive protection from the front, sides, and below. Designed to fit around King LC300 shocks, the guard integrates cleanly with the existing suspension setup without conflicting with shock absorber movement or clearance. Installation takes approximately 5 minutes with all hardware and instructions included. Technical Specs Specification Detail SKU 2014-FG-KING Brand GMF4x4 Compatible Vehicle Toyota LandCruiser LC300 Compatible Shocks King LC300 Shocks Guard Coverage Full Coverage (Fuel Filter and Housing) Material 3mm Steel Finish Powder Coated Black Installation Time Approx. 5 minutes Included Guard, Hardware and Installation Instructions Origin Made in Australia Compatible With Toyota LandCruiser LC300 with King Shocks Frequently Asked Questions Will this guard fit LC300 models with standard or non-King shocks? The 2014-FG-KING is specifically designed to fit around King LC300 shocks. Compatibility with standard factory shocks or other aftermarket shock brands is not confirmed. Please check with us before purchasing if your LC300 is not fitted with King shocks. What does this guard protect? The 2014-FG-KING covers and protects the plastic fuel filter and housing on the Toyota LandCruiser LC300 from rocks, debris, and off-road impact. Damage to the plastic fuel filter housing can be expensive to repair and may require sourcing replacement parts. Does installation require drilling? Your product data does not specify whether drilling is required. Please contact us for installation details before purchasing. What material is the guard made from? The guard is constructed from 3mm steel with a powder coated black finish for durability and corrosion resistance in off-road and outdoor environments. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2320-MG GMC Sierra Denali 2500 2020-Current Underbody Module Protection Guard A 3mm welded steel underbody module protection guard designed specifically for the GMC Sierra Denali 2500 2020 to current, bolting directly to the factory location to protect sensors and modules from stones, rocks, and branches off-road. All hardware, mounts, and instructions included. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 2320-MG is an underbody module protection guard engineered specifically for the GMC Sierra Denali 2500 2020 to current. The guard bolts directly to the factory mounting location for a quick and easy installation, protecting the vehicle's underside sensors and modules from damage caused by stones, rocks, and branches during off-road driving. Manufactured from 3mm welded steel and finished in a hard-wearing black powder coat, the 2320-MG provides a rigid, durable barrier against underbody impact. All hardware, mounts, and instructions are included. Proudly made in Australia by GMF4x4. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. What's in the Box 2320-MG Underbody Module Protection Guard Hardware Mounts Installation Instructions Features & Benefits The 3mm welded steel construction provides a rigid, heavy-duty guard that absorbs and deflects stones, rocks, and branches before they can reach the sensors and electronic modules housed in the underbody of the GMC Sierra Denali 2500. Damage to these components can result in costly repairs and difficult-to-source replacement parts. The black powder coat finish delivers a hard-wearing, corrosion-resistant surface suited to the harsh conditions experienced in off-road and worksite environments. The guard bolts directly to the factory mounting location with no drilling required, using the included hardware and mounts for a straightforward installation. Technical Specs Specification Detail SKU 2320-MG Brand GMF4x4 Compatible Vehicle GMC Sierra Denali 2500 2020-Current Guard Type Underbody Module Protection Guard Material 3mm Welded Steel Finish Black Powder Coat Mounting Method Factory Mounting Location Drilling Required No Included Hardware, Mounts and Installation Instructions Origin Made in Australia Compatible With GMC Sierra Denali 2500 2020-Current Frequently Asked Questions What does this guard protect? The 2320-MG protects the sensors and electronic modules located in the underbody of the GMC Sierra Denali 2500 from stones, rocks, and branches during off-road driving. Damage to these components can be expensive to repair and may require extended wait times for replacement parts. Does installation require drilling into the vehicle? No. The 2320-MG bolts directly to the factory mounting location using the included hardware and mounts. No drilling or modification to the vehicle is required. Is all installation hardware included? Yes. Hardware, mounts, and installation instructions are all included in the pack. Is this guard compatible with other GMC Sierra variants? The 2320-MG is designed specifically for the GMC Sierra Denali 2500 2020 to current. Compatibility with other GMC Sierra variants is not confirmed. Please check with us if you have a different model before purchasing. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2901-SLM Stainless Steel Starlink Mini Mount Bracket A durable, lightweight stainless steel Starlink Mini mount bracket precision laser cut and laser folded for superior structural integrity, with a universal slotted hole design for flexible mounting to roof racks, canopies, rooftop tents, boats, caravans, and more. Built for Australia's toughest conditions by GMF4x4. Product Overview The GMF4x4 2901-SLM is a stainless steel Starlink Mini mount bracket designed to provide a durable, versatile, and lightweight mounting solution for Starlink Mini across a wide range of vehicles, vessels, and setups. Precision laser cut and laser folded construction ensures superior structural integrity for reliable performance in harsh Australian off-road and marine environments. The bracket is designed to be as universal as possible, featuring three slotted holes on each side for flexible mounting to roof racks, roof baskets, rooftop tents, canopies, boats, caravans, and virtually any other mounting surface. Please note that hardware for mounting to your specific setup is not included. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Stainless steel construction provides long-term corrosion resistance against salt, moisture, UV, and the demands of Australian off-road and marine environments, outlasting aluminium and coated mild steel alternatives. The lightweight design adds minimal weight to any vehicle or vessel setup without compromising strength or rigidity. Precision laser cut and laser folded manufacturing ensures tight tolerances and superior structural integrity compared to conventionally fabricated brackets, providing a solid, stable mount for the Starlink Mini dish in any conditions. Three slotted holes on each side of the bracket allow adjustment and positioning flexibility when mounting to roof racks, roof baskets, rooftop tents, canopies, boats, caravans, or any other surface, making the 2901-SLM adaptable to virtually any setup without additional fabrication. Hardware for mounting to a specific setup is not included and will need to be sourced to suit the mounting surface. Technical Specs Specification Detail SKU 2901-SLM Brand GMF4x4 Compatible Device Starlink Mini Material Stainless Steel Construction Precision Laser Cut and Laser Folded Mounting Holes 3x Slotted Holes Each Side Universal Fit Yes Compatible Mounting Surfaces Roof Rack, Roof Basket, Rooftop Tent, Canopy, Boat, Caravan and more Hardware Included No (hardware for mounting to setup not included) Origin Made in Australia Compatible With Starlink Mini Roof racks, roof baskets, rooftop tents, canopies, boats, caravans, and other mounting surfaces via slotted holes Frequently Asked Questions Is mounting hardware included with this bracket? No. The 2901-SLM bracket itself is included, but hardware for mounting to your specific roof rack, canopy, rooftop tent, or other surface is not included. Hardware requirements will vary depending on your mounting surface, so you will need to source appropriate fasteners to suit your setup. Can this bracket be used on a boat or caravan as well as a vehicle? Yes. The 2901-SLM is designed to be as universal as possible and is suitable for mounting to vehicles, caravans, boats, and any other surface where the slotted holes can be used to secure the bracket. The stainless steel construction is particularly suited to marine environments where corrosion resistance is essential. What makes laser cut and laser folded construction superior to standard fabrication? Laser cutting and laser folding produces tighter tolerances and more consistent geometry than conventional cutting and bending methods, resulting in a bracket with superior structural integrity and more precise hole alignment across all mounting positions. Does the Starlink Mini dish come with this bracket? No. The 2901-SLM is a mounting bracket only. The Starlink Mini dish and subscription are separate purchases from SpaceX/Starlink. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2901-SLM-BLK Black Powder Coat Starlink Mini Mount Bracket A durable, lightweight black powder coated Starlink Mini mount bracket precision laser cut and laser folded for superior structural integrity, with a universal slotted hole design for flexible mounting to roof racks, canopies, rooftop tents, boats, caravans, and more. Built for Australia's toughest conditions by GMF4x4. Product Overview The GMF4x4 2901-SLM-BLK is a black powder coated Starlink Mini mount bracket designed to provide a durable, versatile, and lightweight mounting solution for the Starlink Mini across a wide range of vehicles, vessels, and setups. Precision laser cut and laser folded construction ensures superior structural integrity for reliable performance in harsh Australian off-road and marine environments. The bracket features three slotted holes on each side for flexible mounting to roof racks, roof baskets, rooftop tents, canopies, boats, caravans, and virtually any other mounting surface. The black powder coat finish provides a stealth, low-profile appearance that suits dark-trimmed vehicles and accessories. Optional mounting magnets and a 12V power adaptor are available as add-ons at the time of purchase. Please note hardware for mounting to your specific setup is not included. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Black powder coat finish delivers durable chip, corrosion, and UV resistance for long-term performance in all Australian off-road and marine conditions, while providing a clean, low-profile appearance that blends with dark vehicle trims and roof accessories. The lightweight design adds minimal weight to any vehicle or vessel setup without compromising strength or rigidity. Precision laser cut and laser folded manufacturing ensures tight tolerances and superior structural integrity, providing a solid, stable mount for the Starlink Mini dish in any conditions. Three slotted holes on each side allow adjustment and positioning flexibility when mounting to roof racks, roof baskets, rooftop tents, canopies, boats, caravans, or any other surface, making the 2901-SLM-BLK adaptable to virtually any setup without additional fabrication. Technical Specs Specification Detail SKU 2901-SLM-BLK Brand GMF4x4 Colour Black Powder Coat Compatible Device Starlink Mini Construction Precision Laser Cut and Laser Folded Mounting Holes 3x Slotted Holes Each Side Universal Fit Yes Compatible Mounting Surfaces Roof Rack, Roof Basket, Rooftop Tent, Canopy, Boat, Caravan and more Optional Add-Ons Mounting Magnets / 12V Power Adaptor (available at time of purchase) Hardware Included No (hardware for mounting to setup not included) Origin Made in Australia Goes Well With Mounting Magnets add-on for tool-free magnetic mounting to compatible surfaces (available at time of purchase) 12V Power Adaptor add-on for 12V vehicle power connection (available at time of purchase) Frequently Asked Questions Is mounting hardware included with this bracket? No. The 2901-SLM-BLK bracket is included but hardware for mounting to your specific roof rack, canopy, rooftop tent, or other surface is not included. Hardware requirements vary depending on your mounting surface, so you will need to source appropriate fasteners to suit your setup. What are the optional add-ons available at purchase? At the time of purchase you can add mounting magnets for magnetic mounting to compatible surfaces, or a 12V power adaptor for connecting to your vehicle's 12V power supply. Please select the options you require when adding to cart. What is the difference between this listing and the 2901-SLM? The 2901-SLM-BLK is finished in black powder coat for a stealth, low-profile appearance suited to dark vehicle trims and accessories. The 2901-SLM is the same bracket in a natural stainless steel finish. Both share the same slotted hole universal mount design and laser cut construction. Does the Starlink Mini dish come with this bracket? No. The 2901-SLM-BLK is a mounting bracket only. The Starlink Mini dish and subscription are separate purchases. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2902-SLM Stainless Steel Starlink Mini Tapered Mount Bracket A durable, lightweight stainless steel tapered Starlink Mini mount bracket precision laser cut and laser folded for superior structural integrity. The tapered design angles the antenna to prevent water, snow, ice, and debris buildup that could hinder signal reception. Universal slotted hole mounting or optional magnets for flexible installation across vehicles, caravans, boats, and more. Product Overview The GMF4x4 2902-SLM is a tapered stainless steel Starlink Mini mount bracket with a key design advantage over flat mount alternatives — the slight tapered angle helps to prevent water, snow, ice, and debris accumulating on the antenna surface, which could otherwise hinder signal reception in wet and cold conditions. Precision laser cut and laser folded from stainless steel, the 2902-SLM is built to withstand harsh Australian off-road and marine environments. The bracket features three slotted holes on each side for flexible mounting to roof racks, roof baskets, rooftop tents, canopies, boats, caravans, and more, or optional mounting magnets can be purchased for magnetic installation. Please note hardware for mounting to your specific setup is not included. Optional mounting magnets and a 12V power adaptor are available as add-ons at the time of purchase. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The tapered design provides a slight angle on the antenna mount that sheds water, snow, ice, and debris away from the Starlink Mini antenna surface, reducing the risk of signal degradation caused by accumulation on the dish in wet, cold, or dusty conditions. This is the key distinction between the 2902-SLM and the flat 2901-SLM bracket. Stainless steel construction provides long-term corrosion resistance against salt, moisture, UV, and the demands of Australian off-road and marine environments. The lightweight design adds minimal weight to any vehicle or vessel setup without compromising strength or rigidity. Precision laser cut and laser folded manufacturing ensures tight tolerances and superior structural integrity. Three slotted holes on each side allow adjustment and positioning flexibility across roof racks, roof baskets, rooftop tents, canopies, boats, caravans, and any other compatible surface. Technical Specs Specification Detail SKU 2902-SLM Brand GMF4x4 Colour Stainless Steel Design Tapered (angled to shed water, snow, ice and debris) Compatible Device Starlink Mini Material Stainless Steel Construction Precision Laser Cut and Laser Folded Mounting Holes 3x Slotted Holes Each Side Universal Fit Yes Compatible Mounting Surfaces Roof Rack, Roof Basket, Rooftop Tent, Canopy, Boat, Caravan and more Optional Add-Ons Mounting Magnets / 12V Power Adaptor (available at time of purchase) Hardware Included No (hardware for mounting to setup not included) Origin Made in Australia Goes Well With Mounting Magnets add-on for tool-free magnetic mounting to compatible surfaces (available at time of purchase) 12V Power Adaptor add-on for 12V vehicle power connection (available at time of purchase) Frequently Asked Questions What is the benefit of the tapered design over a flat mount? The tapered design angles the Starlink Mini antenna slightly, allowing water, snow, ice, and debris to run off the antenna surface rather than accumulating on it. Build-up on the antenna can hinder signal reception, particularly in wet or cold conditions. The 2902-SLM tapered bracket addresses this with a purpose-built angle that keeps the antenna clear. What is the difference between the 2902-SLM and the 2901-SLM? The 2902-SLM is a tapered bracket with a slight angle to shed water, snow, ice, and debris from the antenna. The 2901-SLM is a flat bracket. Both are available in stainless steel and black powder coat and share the same slotted hole universal mounting design. Is mounting hardware included? No. The 2902-SLM bracket is included but hardware for mounting to your specific roof rack, canopy, rooftop tent, or other surface is not included. You will need to source appropriate fasteners to suit your setup. Can I use magnets instead of bolts to mount this bracket? Yes. Optional mounting magnets can be purchased as an add-on at the time of purchase, providing a tool-free magnetic mounting option for compatible surfaces. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2902-SLM-BLK Black Powder Coat Starlink Mini Tapered Mount Bracket A durable, lightweight black powder coated tapered Starlink Mini mount bracket precision laser cut and laser folded for superior structural integrity. The tapered design angles the antenna to prevent water, snow, ice, and debris buildup that could hinder signal reception. Universal slotted hole mounting or optional magnets for flexible installation across vehicles, caravans, boats, and more. Product Overview The GMF4x4 2902-SLM-BLK is a tapered black powder coated Starlink Mini mount bracket with the same angled design as the 2902-SLM stainless variant, adding a clean, low-profile black finish suited to dark-trimmed vehicles and accessories. The slight tapered angle helps to prevent water, snow, ice, and debris accumulating on the antenna surface, which could otherwise hinder signal reception in wet and cold conditions. Precision laser cut and laser folded construction ensures superior structural integrity for reliable performance in harsh Australian off-road and marine environments. Three slotted holes on each side provide flexible mounting to roof racks, roof baskets, rooftop tents, canopies, boats, caravans, and more, or optional mounting magnets can be purchased for magnetic installation. Please note hardware for mounting to your specific setup is not included. Optional mounting magnets and a 12V power adaptor are available as add-ons at the time of purchase. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The tapered design provides a slight angle on the antenna mount that sheds water, snow, ice, and debris away from the Starlink Mini antenna surface, reducing the risk of signal degradation from accumulation in wet, cold, or dusty conditions. Black powder coat finish delivers durable chip, corrosion, and UV resistance for long-term performance in all Australian off-road and marine conditions, while providing a clean, low-profile appearance that blends with dark vehicle trims and roof accessories. Precision laser cut and laser folded manufacturing ensures tight tolerances and superior structural integrity. Three slotted holes on each side allow adjustment and positioning flexibility across roof racks, roof baskets, rooftop tents, canopies, boats, caravans, and any other compatible surface. Technical Specs Specification Detail SKU 2902-SLM-BLK Brand GMF4x4 Colour Black Powder Coat Design Tapered (angled to shed water, snow, ice and debris) Compatible Device Starlink Mini Construction Precision Laser Cut and Laser Folded Mounting Holes 3x Slotted Holes Each Side Universal Fit Yes Compatible Mounting Surfaces Roof Rack, Roof Basket, Rooftop Tent, Canopy, Boat, Caravan and more Optional Add-Ons Mounting Magnets / 12V Power Adaptor (available at time of purchase) Hardware Included No (hardware for mounting to setup not included) Origin Made in Australia Goes Well With Mounting Magnets add-on for tool-free magnetic mounting to compatible surfaces (available at time of purchase) 12V Power Adaptor add-on for 12V vehicle power connection (available at time of purchase) Frequently Asked Questions What is the benefit of the tapered design over a flat mount? The tapered design angles the Starlink Mini antenna slightly, allowing water, snow, ice, and debris to run off the antenna surface rather than accumulating on it. Build-up on the antenna can hinder signal reception, particularly in wet or cold conditions. The 2902-SLM-BLK tapered bracket addresses this with a purpose-built angle that keeps the antenna clear. What is the difference between the 2902-SLM-BLK and the 2901-SLM-BLK? The 2902-SLM-BLK is a tapered bracket with a slight angle to shed water, snow, ice, and debris from the antenna. The 2901-SLM-BLK is a flat bracket. Both are black powder coated and share the same slotted hole universal mounting design. Is mounting hardware included? No. The 2902-SLM-BLK bracket is included but hardware for mounting to your specific roof rack, canopy, rooftop tent, or other surface is not included. You will need to source appropriate fasteners to suit your setup. Can I use magnets instead of bolts to mount this bracket? Yes. Optional mounting magnets can be purchased as an add-on at the time of purchase, providing a tool-free magnetic mounting option for compatible surfaces. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 AIR-3008 Toyota LandCruiser LC80 C Pillar Air Compressor Bracket Mount Suits ARB CKMA12 and CKMTA12 A solid stainless steel C pillar air compressor bracket for the Toyota LandCruiser LC80, designed to mount the ARB CKMA12/24 or CKMTA12/24 air compressor securely in otherwise wasted space using factory threaded holes only. No drilling required. Completely out of sight once installed. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 AIR-3008 is a stainless steel C pillar air compressor bracket engineered specifically for the Toyota LandCruiser LC80. Designed to mount the ARB CKMA12/24 single pump or CKMTA12/24 twin pump air compressor in the C pillar space using the original factory threaded holes only, requiring no drilling whatsoever. Once installed, the compressor is completely out of sight for a clean, stealth installation in otherwise wasted space. Onboard air opens up a wide range of capabilities including air lockers, air tools, winch freespool, air jacks, tyre inflation, airbags, and more. The solid stainless steel construction will not rust, providing a long-lasting mount suited to the demands of serious 4WD use. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Solid stainless steel construction provides a rigid, corrosion-free mount that will not rust regardless of moisture, salt, or harsh off-road conditions, ensuring the compressor stays securely mounted over the life of the vehicle. The bracket utilises only the original factory threaded holes in the C pillar area with no drilling required, preserving the vehicle's structural integrity and allowing removal without any permanent modification. The installed compressor sits completely out of sight for a tidy, professional finish that does not clutter the cabin or cargo area. Compatible with both the ARB CKMA12/24 single pump and CKMTA12/24 twin pump air compressor, giving owners the flexibility to run either the standard or higher-flowing twin pump version in the same bracket. Proudly made in Australia by GMF4x4. Technical Specs Specification Detail SKU AIR-3008 Brand GMF4x4 Compatible Vehicle Toyota LandCruiser LC80 Mount Location C Pillar Compatible Compressors ARB CKMA12 / CKMA24 / CKMTA12 / CKMTA24 Material Stainless Steel Drilling Required No Mounting Method Factory Threaded Holes Only Visibility Once Installed Completely Out of Sight Origin Made in Australia Compatible With Toyota LandCruiser LC80 ARB CKMA12 Single Pump Air Compressor ARB CKMA24 Single Pump Air Compressor ARB CKMTA12 Twin Pump Air Compressor ARB CKMTA24 Twin Pump Air Compressor Frequently Asked Questions Does installation require drilling into the vehicle? No. The AIR-3008 uses only the original factory threaded holes in the C pillar area. No drilling or permanent modification to the vehicle is required. What is the difference between the ARB CKMA12 and CKMTA12 compressors? The CKMA12 is ARB's single pump air compressor. The CKMTA12 is the higher-flowing twin pump version. The AIR-3008 bracket is designed to suit both, giving owners the choice of single or twin pump depending on their airflow requirements. What can onboard air be used for? Onboard air from a mounted compressor has a wide range of applications including air lockers, air tools, winch freespool, air jacks, pumping up tyres, and airbags, making it one of the most versatile upgrades for a serious 4WD build. Is the ARB air compressor included with this bracket? No. The AIR-3008 is a mounting bracket only. The ARB CKMA12/24 or CKMTA12/24 air compressor is a separate purchase. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 Vogue-Outlander 2024 Mitsubishi Outlander 2024 UHF Aerial Bracket A stainless steel 304/316 powder coated black UHF aerial bracket designed specifically for the Mitsubishi Outlander 2024, mounting in front of the mirror for a clean OEM finish that keeps the aerial out of the driver's field of vision. All mounting hardware and instructions included. Product Overview The GMF4x4 Vogue-Outlander 2024 is a UHF aerial bracket engineered specifically for the Mitsubishi Outlander 2024. The bracket mounts in front of the mirror, positioning the UHF aerial in a non-obtrusive location that stays out of the driver's field of vision while delivering a clean, OEM-style finish that suits the Outlander's interior design. Manufactured from stainless steel 304/316 and finished in powder coated black for both aesthetics and long-term durability, the bracket comes with all mounting hardware required and installation instructions for a complete, straightforward installation. What's in the Box Vogue-Outlander 2024 UHF Aerial Bracket All Mounting Hardware Installation Instructions Features & Benefits The mirror-front mounting position keeps the UHF aerial completely out of the driver's field of vision, providing a non-obtrusive installation that does not distract during driving. The OEM-style finish integrates cleanly with the Mitsubishi Outlander 2024 interior for a factory-look result. Stainless steel 304/316 construction provides excellent corrosion resistance in all weather and environmental conditions, while the powder coated black finish adds a further layer of protection alongside a clean, discreet appearance. All mounting hardware and instructions are included for a complete installation out of the box. Technical Specs Specification Detail SKU Vogue-Outlander 2024 Brand GMF4x4 Compatible Vehicle Mitsubishi Outlander 2024 Mount Location In Front of Mirror Material Stainless Steel 304/316 Finish Powder Coated Black Included All Mounting Hardware and Instructions Compatible With Mitsubishi Outlander 2024 Frequently Asked Questions Will this bracket obstruct my view when driving? No. The bracket is specifically designed to mount in front of the mirror, positioning the UHF aerial in a non-obtrusive location that stays completely out of the driver's field of vision during driving. Is all installation hardware included? Yes. All mounting hardware required for installation is included alongside the bracket and installation instructions. What material is this bracket made from? The bracket is manufactured from stainless steel 304/316 and finished in powder coated black for both a clean aesthetic appearance and long-term corrosion resistance. Is a UHF antenna included with this bracket? No. The Vogue-Outlander 2024 is a mounting bracket only. A compatible UHF aerial is a separate purchase. Please check with us for compatible UHF antenna options. Does installation require drilling? Your product data does not specify whether drilling is required. Please contact us for installation details before purchasing.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less