Parkmate PM-208CPAFILTER Genuine Replacement HEPA Filter for PM-208CPA Air Purifier Genuine replacement HEPA filter for the Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration, maintaining effective removal of small particles, pollen, dust, odours, and pet hair in vehicles and small spaces. Product Overview The Parkmate PM-208CPAFILTER is the genuine replacement filter designed specifically for the PM-208CPA 3-Stage Air Purifier. Regular filter replacement ensures the PM-208CPA continues to perform at full effectiveness, maintaining the 3-stage filtration system's ability to remove fine airborne particles, pollen, dust, odours, and pet hair from vehicle cabins and small indoor spaces up to 10 square metres. Using genuine Parkmate replacement filters ensures compatibility with the PM-208CPA's CleanAir-AI technology and maintains the clean air delivery rate of up to 13 cubic metres per hour. Refer to the PM-208CPA user manual for recommended filter replacement intervals based on usage and air quality conditions. Note: This is a replacement filter only. The PM-208CPA air purifier unit is sold separately. Features & Benefits Genuine Replacement Filter — purpose-built replacement for the Parkmate PM-208CPA 3-Stage Air Purifier HEPA Filtration — removes small particles, pollen, dust, odours, and pet hair from vehicle cabins and small spaces Maintains 13m3/h Performance — restores full clean air delivery rate of the PM-208CPA after replacement Compatible with CleanAir-AI Technology — genuine filter ensures continued performance with the PM-208CPA's intelligent filtration system Suitable for Vehicles and Small Spaces — supports air purification in vehicles, small offices, and household areas up to 10m2 Asthma and Allergy Friendly — continued filtration of common airborne triggers including pollen, dust, and pet hair Technical Specs Specification Detail Part Number PM-208CPAFILTER Brand Parkmate Product Type Replacement HEPA Filter Compatible Device Parkmate PM-208CPA Air Purifier Filtration Stages 3 Technology CleanAir-AI Compatible Applicable Area Up to 10m2 Max Air Volume (when fitted) 13m3 / Hour Filter Dimensions Please refer to product packaging or contact F.A.E. What's in the Box 1 x Parkmate PM-208CPAFILTER Replacement HEPA Filter Compatible With / Goes Well With Compatible With: Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration Goes well with: Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration (host unit, sold separately) Frequently Asked Questions Q: How often should the PM-208CPAFILTER be replaced? A: Replacement frequency depends on usage intensity and local air quality conditions. For vehicles used daily in urban or dusty environments, more frequent replacement may be required. Refer to the PM-208CPA user manual for the manufacturer's recommended replacement intervals and filter condition indicators. Q: Is this filter compatible with any other Parkmate air purifiers? A: The PM-208CPAFILTER is designed specifically for the Parkmate PM-208CPA Air Purifier. Compatibility with other Parkmate models is not confirmed. Contact F.A.E. with your purifier's model number to confirm filter compatibility before ordering. Q: Will using a non-genuine filter affect the PM-208CPA's performance? A: Using genuine Parkmate replacement filters ensures the PM-208CPA operates at its rated performance including the 13m3/h clean air delivery rate and full CleanAir-AI technology compatibility. Non-genuine filters may not meet the same filtration standards and could reduce purification effectiveness. Q: Is the PM-208CPA air purifier unit included with this filter? A: No. The PM-208CPAFILTER is a replacement filter only. The Parkmate PM-208CPA Air Purifier unit is sold separately. Q: How do I install the replacement filter? A: Refer to the PM-208CPA user manual for step-by-step filter replacement instructions. The process is designed to be straightforward and tool-free. Contact F.A.E. if you require assistance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hema HX-Box GPS Navigation Module with Hema Nav 3-Year Subscription and Wireless Apple CarPlay Android Auto GPS navigation module for in-car infotainment systems delivering wireless Apple CarPlay and Android Auto, premium on and off-road Hema Nav navigation with a 3-year subscription, and access to the Hema 4WD Maps app — all running on Android 13 with 6GB RAM and 64GB storage, integrating directly with your vehicle's existing head unit display. Product Overview The Hema HX-Box is a compact GPS navigation module that connects to your vehicle's existing wired Apple CarPlay or Android Auto head unit, adding wireless CarPlay and Android Auto smartphone connectivity alongside the full Hema Nav premium navigation platform. Powered by a Qualcomm SM6115 octa-core processor with Android 13, 6GB RAM, and 64GB onboard storage, the HX-Box delivers smooth, responsive navigation and app performance directly through your factory or aftermarket infotainment screen. The included 3-year Hema Nav subscription provides comprehensive on and off-road navigation for Australia and New Zealand, featuring a dynamic 3D Hema Explorer Map, HERE Technologies turn-by-turn route guidance with live traffic, off-road track guidance for remote destinations, over 1.8 million Points of Interest including campsites, fuel stops, and caravan parks, and 1.75 million kilometres of mapped roads and tracks. Quarterly map and software updates are delivered via Wi-Fi throughout the subscription period. The Hema 4WD Maps app is also accessible through the HX-Box, providing digitised versions of Hema's iconic printed maps, award-winning regional 4WD content, track recording, waypoints, and route plotting for extended off-road adventures. A separate subscription is required for the 4WD Maps app. Integration with Memory-Map enables access to digital versions of Hema's printed maps and maps from multiple providers. Note: The Hema HX-Box is compatible with wired Apple CarPlay and Android Auto infotainment systems only. The HX-Box connects to your head unit's USB port and enables wireless smartphone connectivity from that point. Confirm your head unit supports wired CarPlay or Android Auto before purchasing. MicroSD card support up to 512GB (card not included). Adaptor not included — 12/24V adaptor cable supplied for use with your own adaptor. Features & Benefits Wireless Apple CarPlay and Android Auto — adds wireless smartphone connectivity to compatible wired CarPlay/Android Auto head units via USB connection Hema Nav 3-Year Subscription Included — premium on and off-road navigation for Australia and New Zealand with quarterly map updates via Wi-Fi Dynamic 3D Hema Explorer Map — fully navigable Australia-wide coverage with HERE Technologies turn-by-turn routing and live traffic 1.8M+ Points of Interest — campsites, fuel stops, caravan parks, and more across Australia and New Zealand Off-Road Track Guidance — remote destination routing, track recording, waypoints, and GPX export for 4WD and adventure touring 1.75M km of Mapped Roads and Tracks — comprehensive coverage for both sealed and unsealed exploration Hema 4WD Maps App Access — digitised Hema printed maps, regional 4WD content, route plotting, and navigation stats (separate subscription required) Memory-Map Integration — access digital versions of Hema's printed maps and additional map providers Android 13 OS — Qualcomm SM6115 octa-core processor, 6GB RAM, and 64GB storage for fast, responsive performance Dual-Band Wi-Fi — 802.11 a/b/g/n/ac on 2.4GHz and 5GHz for reliable wireless connectivity Bluetooth 5.0 — stable wireless audio and device pairing MicroSD Expansion — supports up to 512GB MicroSD card for additional map and media storage 3-Year Hema Protect Warranty — full confidence with the included Hema warranty coverage Australia and New Zealand Coverage — both countries fully covered within the Hema Nav platform Technical Specs Specification Detail SKU HX-Box Brand Hema Product Type GPS Navigation Module Processor Qualcomm SM6115 Octa-Core (4 x Cortex-A73 Kryo Gold @2.0GHz + 4 x Cortex-A53 Kryo Silver @1.8GHz), 11nm Operating System Android 13 RAM 6GB Storage 64GB MicroSD Support Up to 512GB GPS Yes (GPS / GLONASS) Wi-Fi 802.11 a/b/g/n/ac, 2.4GHz + 5GHz Bluetooth 2.1+EDR / 3.0 / 4.1 LE / 4.2 BLE / 5.0 LE Apple CarPlay Wireless (requires wired CarPlay head unit) Android Auto Wireless (requires wired Android Auto head unit) Hema Nav Subscription 3-Year (live traffic, quarterly updates included) Hema 4WD Maps App Accessible (separate subscription required) Memory-Map Integration Yes Points of Interest 1.8M+ (campsites, fuel, caravan parks and more) Mapped Roads and Tracks 1.75M km Navigation Coverage Australia and New Zealand Map Updates Quarterly via Wi-Fi Power Input 5V 2A Power Consumption 5W USB Ports USB-A and USB-C Warranty 3-Year Hema Protect Box Contents 1 x HX-Box Unit, 2 x Data Cables, 1 x 12/24V Adaptor Cable (adaptor not included), 1 x User Manual What's in the Box 1 x Hema HX-Box GPS Navigation Module 2 x Data Cables 1 x 12/24V Adaptor Cable (Adaptor not included) 1 x User Manual Compatible With / Goes Well With Compatible With: Wired Apple CarPlay and Android Auto head units. The Hema HX-Box connects to the head unit's USB port and adds wireless CarPlay and Android Auto capability. Confirm your head unit supports wired CarPlay or Android Auto before purchasing. Goes well with: Pioneer DMH-AP6650BT 9 Inch Wireless CarPlay Android Auto Head Unit Hema HR-1 7 Inch Smart Monitor with Dual-Channel DVR MicroSD card up to 512GB (for additional map and media storage, sold separately) Frequently Asked Questions Q: Does the Hema HX-Box work with any head unit? A: The Hema HX-Box is compatible with head units that support wired Apple CarPlay or wired Android Auto via USB. It connects to the head unit's USB port and enables wireless smartphone connectivity from that point. It is not compatible with head units that do not support CarPlay or Android Auto. Confirm your head unit's compatibility before purchasing, or contact F.A.E. for guidance. Q: What is included in the 3-year Hema Nav subscription? A: The 3-year Hema Nav subscription includes access to the dynamic 3D Hema Explorer Map with Australia and New Zealand coverage, HERE Technologies live traffic and turn-by-turn routing, off-road track guidance, over 1.8 million Points of Interest, 1.75 million kilometres of mapped roads and tracks, and quarterly map and software updates delivered via Wi-Fi. The Hema 4WD Maps app requires a separate subscription. Q: Is the Hema 4WD Maps app included with the HX-Box? A: The Hema 4WD Maps app is accessible on the HX-Box but requires a separate subscription to use beyond any included trial period. The app provides digitised versions of Hema's iconic printed maps, award-winning regional 4WD content, track recording, route plotting, and waypoint navigation for off-road adventures. Check Hema's current subscription options at time of purchase. Q: Is a MicroSD card included? A: No. A MicroSD card is not included and must be purchased separately. The HX-Box supports MicroSD cards up to 512GB for additional map data and media storage. Q: Is the 12/24V power adaptor included? A: The 12/24V adaptor cable is included, however the adaptor itself is not included and must be sourced separately. Two data cables are included in the box for connectivity to the head unit.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hema Maps HX-M1 Motorbike and SxS GPS Smart Navigator with Hema Nav 3-Year Subscription and Wireless Apple CarPlay Android Auto Purpose-built 6.2-inch GPS smart navigator for motorcycles and side-by-sides, combining offline Hema Nav premium navigation with wireless Apple CarPlay and Android Auto, Bluetooth music and calls, handlebar controller, and HD front and rear camera compatibility for confident on-road and off-road adventure anywhere in Australia or New Zealand. Product Overview The Hema HX-M1 is a rugged, weatherproof GPS smart navigator built specifically for motorcycle and side-by-side (SxS) riders who demand reliable navigation, smart connectivity, and incident recording on every journey. Preloaded with offline Hema Maps for Australia and New Zealand, the HX-M1 keeps you navigating confidently far beyond mobile coverage, with on-road turn-by-turn voice guidance and off-road track guidance powered by the full Hema Nav Premium platform. The 6.2-inch sunlight-readable IPS touchscreen is water-resistant and operable in the rain, displaying navigation, maps, and front and rear camera footage in a bright, glare-resistant format. Wireless Android Auto and Apple CarPlay provide hands-free smartphone control for compatible navigation, call, message, and music apps directly on the screen, while Bluetooth music and hands-free calling deliver audio connectivity without wires. The included handlebar controller enables call accept/reject, image capture, and device control without removing hands from the bars. HD front and rear camera recording is supported via the optional HX-MICAM Dual Camera DVR Kit (sold separately or included in specific bundles), with IP67-rated cameras delivering all-weather Full HD footage and a 3D G-sensor automatically saving footage when an incident is detected. The vibration and shock resistant mount suits virtually any motorcycle or SxS with a 3-metre cable length, and additional mounting options are available. The included 3-year Hema Nav subscription covers live traffic, quarterly map updates via Wi-Fi, over 1.8 million Points of Interest including campsites, fuel stops, and caravan parks, 75 million kilometres of mapped roads and tracks, day and night display modes, track recording, and map customisation. Access to the Hema 4WD Maps app is available with a separate subscription, providing digitised Hema printed maps, regional 4WD content, route plotting, and Memory-Map integration. Note: Front and rear HD cameras are sold separately (HX-MICAM) or included in specific bundles. The Hema 4WD Maps app requires a separate subscription beyond the included 3-year Hema Nav subscription. Features & Benefits 6.2-Inch Sunlight-Readable IPS Touchscreen — water-resistant display operable in rain, showing navigation, maps, and camera footage with clear visibility in all lighting conditions Wireless Apple CarPlay and Android Auto — hands-free smartphone control for navigation, calls, messages, music, and podcasts on the 6.2-inch screen without cables Hema Nav Premium 3-Year Subscription — on-road and off-road navigation with live traffic, offline maps, 1.8M+ POI, 75M km of roads and tracks, and quarterly Wi-Fi updates Offline Map Support — preloaded Hema Maps for Australia and New Zealand enable navigation far beyond mobile coverage without internet connection Off-Road Track Guidance — safely plan and navigate remote destinations, trails, and tracks across Australia and New Zealand Handlebar Controller — accept and reject calls, capture images, and control the device hands-free without removing hands from the bars HD Front and Rear Camera Support — compatible with the HX-MICAM Dual Camera DVR Kit for Full HD front and rear incident recording (camera kit sold separately) IP67 Rear Camera Compatibility — all-weather Full HD footage in rain, mud, and harsh riding environments (with HX-MICAM) 3D G-Sensor — automatically saves footage when an incident or impact is detected Bluetooth Music and Calls — wireless audio streaming, hands-free calling, and podcast playback Separate GPS Antenna — dedicated GPS antenna for accurate location in any environment Vibration and Shock Resistant Mount — 3-metre cable length fits virtually any motorcycle or SxS; additional mounting options available 1.8M+ Points of Interest — campsites, fuel stops, caravan parks, and more across Australia and New Zealand Hema 4WD Maps App Access — digitised Hema printed maps, regional 4WD content, waypoints, and Memory-Map integration (separate subscription required) 3-Year Hema Protect Warranty — full confidence with Hema's included warranty coverage Technical Specs Specification Detail SKU HX-M1 Brand Hema Product Type Motorcycle and SxS GPS Smart Navigator Screen Size 6.2 Inch Display Type IPS, Sunlight-Readable, Water-Resistant Touch Apple CarPlay Wireless Android Auto Wireless Bluetooth Yes (Music, Calls, Podcasts) GPS Antenna Separate External Antenna G-Sensor 3D (Incident Detection) Camera Support Front and Rear HD (HX-MICAM kit required, sold separately) Camera IP Rating IP67 (with HX-MICAM) Cable Length 3 Metres Mount Vibration and Shock Resistant Hema Nav Subscription 3-Year (live traffic, quarterly updates included) Hema 4WD Maps App Accessible (separate subscription required) Points of Interest 1.8M+ (campsites, fuel, caravan parks and more) Mapped Roads and Tracks 75M km Navigation Coverage Australia and New Zealand Offline Maps Yes (preloaded) Map Updates Quarterly via Wi-Fi Day/Night Display Mode Yes Track Recording Yes Handlebar Controller Yes (included) Warranty 3-Year Hema Protect Compatible With / Goes Well With Compatible With: Motorcycles and side-by-sides (SxS). The HX-M1 is purpose-built for motorcycle and SxS mounting with a vibration and shock resistant mount and 3-metre cable length suited to virtually any motorcycle or SxS on the market. Goes well with: Hema HX-MICAM Dual Camera DVR Kit (for front and rear HD camera recording) Hema HX-Box GPS Navigation Module (for in-vehicle infotainment navigation) Frequently Asked Questions Q: Are the cameras included with the HX-M1? A: Front and rear HD cameras are not included with the standard HX-M1 and are sold separately as the Hema HX-MICAM Dual Camera DVR Kit. The HX-MICAM kit includes two Sony IMX307 1080p Full HD cameras with IP67 water and dust resistance, a 1-metre front camera cable, and a 3-metre rear camera cable. The HX-MICAM may be included in specific bundles — check the product listing at time of purchase. Q: Does the Hema 4WD Maps app require a subscription after the included trial? A: Yes. Access to the Hema 4WD Maps app requires a separate subscription and is not included in the 3-year Hema Nav subscription supplied with the HX-M1. The Hema Nav subscription covers on-road and off-road navigation, live traffic, quarterly map updates, and Points of Interest. The 4WD Maps app provides digitised Hema printed maps and regional 4WD content under its own subscription. Q: Can the HX-M1 navigate off-road without mobile coverage? A: Yes. The HX-M1 is preloaded with offline Hema Maps for Australia and New Zealand, enabling full navigation without internet connection or mobile coverage. Off-road track guidance, waypoints, and track recording are all available offline, making the HX-M1 suitable for remote touring well beyond mobile range. Q: Does the handlebar controller work for all functions? A: The included handlebar controller enables call accept and reject, image capture, and general device control without removing hands from the bars. Full touchscreen control remains available for more detailed interactions such as route input and settings adjustment when stationary. Q: Is the HX-M1 suitable for side-by-sides as well as motorcycles? A: Yes. The HX-M1 is purpose-built for both motorcycles and side-by-sides (SxS). The vibration and shock resistant mount with 3-metre cable length is designed to suit virtually any motorcycle or SxS on the market. Additional mounting options are available for specific fitment requirements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration Compact 3-stage filtration air purifier with CleanAir-AI technology designed for vehicles and small spaces, removing small particles, pollen, dust, odours, and pet hair at a clean air delivery rate of up to 13 cubic metres per hour — ideal for drivers and passengers with asthma and allergies. Product Overview The Parkmate PM-208CPA is a vehicle-focused air purifier featuring a 3-stage filtration system with CleanAir-AI technology, engineered to remove airborne contaminants including fine particles, pollen, dust, odours, and pet hair from the cabin environment. Operating at a clean air delivery rate of up to 13 cubic metres per hour, the PM-208CPA is well suited to vehicles, small offices, and household spaces up to 10 square metres, providing rapid relief from airborne irritants in compact environments. Designed with drivers and passengers with asthma and allergies in mind, the PM-208CPA connects via the included USB-C cable or 12/24V car charger for flexible in-vehicle or desktop use. Genuine replacement HEPA filters are available separately for ongoing filtration performance. Note: Genuine replacement HEPA filters are sold separately. Product weight not confirmed by supplier — contact F.A.E. for shipping weight details. Features & Benefits 3-Stage Filtration System — removes small particles, pollen, dust, odours, and pet hair for cleaner, healthier cabin air CleanAir-AI Technology — intelligent air purification for efficient contaminant removal 13m3/h Clean Air Delivery Rate — purifies up to 13 cubic metres of air per hour for rapid improvement in air quality Perfect for Vehicles and Small Spaces — designed specifically for in-vehicle use and suitable for small offices and household areas up to 10m2 Asthma and Allergy Friendly — targeted filtration of common triggers including pollen, dust, and pet hair Dual Power Options — powered via included USB-C cable or 12/24V car charger for flexible use in vehicle or at a desk Compact Design — 75mm x 68mm x 200mm footprint fits discreetly in vehicle cup holders and on desktops Replacement HEPA Filters Available — genuine replacement filters sold separately for continued long-term performance Technical Specs Specification Detail SKU PM-208CPA Brand Parkmate Product Type Filter Air Purifier Filtration Stages 3 Technology CleanAir-AI Rated Voltage 5V DC Rated Power 5 Watts Applicable Area Up to 10m2 Max Air Volume 13m3 / Hour Power Input USB-C Power Supply USB-C Cable or 12/24V Car Charger (both included) Product Dimensions 75mm (W) x 68mm (D) x 200mm (H) Replacement Filters Genuine HEPA Filters (sold separately) What's in the Box 1 x Parkmate PM-208CPA Vehicle Air Purifier 1 x 12/24V Car Charger 1 x USB-C Cable 1 x User Manual Compatible With / Goes Well With Goes well with: Parkmate Genuine Replacement HEPA Filters for PM-208CPA (sold separately) Frequently Asked Questions Q: What does the 3-stage filtration system filter out? A: The PM-208CPA 3-stage filtration system removes fine airborne particles, pollen, dust, odours, and pet hair from the surrounding air. The system is designed to create a cleaner breathing environment particularly for individuals with asthma and allergies, targeting the most common airborne irritants found in vehicle cabins and small indoor spaces. Q: Is the PM-208CPA suitable for use outside of a vehicle? A: Yes. While designed specifically for in-vehicle use, the PM-208CPA is also suitable for small offices and household spaces up to 10 square metres. It can be powered via the included USB-C cable from any USB power source for desktop or home use, in addition to the included 12/24V car charger for in-vehicle operation. Q: How often do the filters need to be replaced? A: Filter replacement frequency will depend on usage and air quality conditions. Genuine replacement HEPA filters for the PM-208CPA are available separately. Regular filter replacement ensures continued purification performance over time. Refer to the included user manual for recommended replacement intervals. Q: What power source does the PM-208CPA use? A: The PM-208CPA operates at 5V DC via USB-C. The included 12/24V car charger enables direct in-vehicle connection, and the included USB-C cable can be used with any compatible USB power source for desktop or home use. Q: What is CleanAir-AI technology? A: CleanAir-AI is Parkmate's intelligent air purification technology incorporated into the PM-208CPA to enhance the efficiency and performance of the 3-stage filtration system. For detailed technical information on CleanAir-AI, refer to the included user manual or contact F.A.E.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 BB-237P BYD Shark Bonnet Hinge UHF Antenna Bracket - Passenger Side The original Australian-made bonnet hinge UHF antenna bracket for the BYD Shark, pressed from 5mm powder coated steel and bolting directly to the passenger side bonnet hinge for a rock-solid, no-compromise UHF antenna mount. Product Overview The GMF4x4 BB-237P is a purpose-built passenger side bonnet hinge UHF antenna bracket designed specifically for the BYD Shark (October 2024 to current). As the original creator of the bonnet hinge UHF mount, GMF4x4 brings proven Australian engineering to the BYD Shark platform, delivering the strongest and most reliable bonnet-mounted antenna solution on the market. The BB-237P bolts directly to the passenger side bonnet hinge using the existing hardware points, requiring no drilling, cutting, or modification to the vehicle. The bracket is pressed from 5mm steel and finished with a durable powder coat black finish for long-term corrosion resistance in all Australian conditions. Importantly, the bracket does not affect the opening of the bonnet or the operation of the windscreen wipers, making it a practical and interference-free installation. All 4WD UHF antennas are compatible with the GMF4x4 bracket mount, giving you full flexibility in antenna selection. GMF4x4 holds many registered designs, patents, and trademarks in Australia and internationally. Features & Benefits Original Bonnet Hinge UHF Mount Creator: GMF4x4 is the original inventor of the bonnet hinge UHF mount design. The BB-237P is the authentic product backed by registered designs, patents, and trademarks in Australia and internationally, not an imitation. Pressed 5mm Steel Construction: Manufactured from 5mm pressed steel for maximum strength and rigidity, the BB-237P is the strongest bonnet antenna bracket on the market, built to withstand vibration, off-road conditions, and the demands of daily 4WD use. Powder Coated Black Finish: The durable powder coat black finish provides long-lasting protection against corrosion, UV exposure, and the harsh Australian environment, maintaining a clean and professional appearance over the life of the bracket. Proudly Made in Australia: Designed and manufactured in Australia specifically for the BYD Shark, ensuring precise fitment and the quality assurance of local engineering and production standards. No Bonnet or Wiper Interference: The BB-237P is engineered so that fitting the bracket does not affect the opening of the bonnet or the operation of the windscreen wipers, maintaining full factory functionality after installation. Universal UHF Antenna Compatibility: All 4WD UHF antennas fit perfectly on the GMF4x4 bracket mount, giving you complete freedom to pair the BB-237P with your preferred UHF antenna brand and model. Technical Specs Specification Detail Brand GMF4x4 SKU BB-237P Type Bonnet Hinge UHF Antenna Bracket Side Passenger Side Material 5mm Pressed Steel Finish Powder Coated Black Country of Origin Australia Antenna Compatibility All 4WD UHF Antennas Bonnet Interference None Wiper Interference None Vehicle Make BYD Compatible With / Goes Well With Compatible Vehicles: Make Model Year Range Notes BYD Shark Oct 2024 - Current Passenger Side Bonnet Hinge Goes Well With: All 4WD UHF CB antennas UHF antenna coax cables and adaptors CB and UHF radios Driver side bracket GMF4x4 BB-237D (for dual antenna setup) Frequently Asked Questions What side does the BB-237P mount on? The BB-237P is the passenger side bonnet hinge bracket. It bolts directly to the passenger side bonnet hinge of the BYD Shark (October 2024 to current). If you require a driver side bracket, please purchase the GMF4x4 BB-237D instead. Both brackets can be used together for a dual antenna setup. Will the bracket affect my bonnet or windscreen wipers? No. The GMF4x4 BB-237P is specifically engineered so that it does not affect the opening of the bonnet or the operation of the windscreen wipers. Full factory bonnet and wiper functionality is retained after installation. Does the BB-237P work with my UHF antenna brand? Yes. The GMF4x4 BB-237P is compatible with all 4WD UHF antennas, giving you complete flexibility to use your preferred antenna brand and model. Whether you run an Oricom, GME, Uniden, or any other standard UHF antenna, it will fit perfectly on the bracket mount. Why should I choose GMF4x4 over other bonnet bracket brands? GMF4x4 is the original creator of the bonnet hinge UHF mount and holds registered designs, patents, and trademarks in Australia and internationally. The BB-237P is pressed from 5mm steel, making it the strongest bracket on the market, and is proudly made in Australia. Imitation brackets do not carry the same engineering credentials, material quality, or legal protections as the genuine GMF4x4 product. Does the BB-237P require drilling or vehicle modification? No. The BB-237P bolts directly to the existing passenger side bonnet hinge of the BYD Shark without any drilling, cutting, or modification to the vehicle. This preserves the factory condition of the vehicle and makes the bracket straightforward to install and remove if needed.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 239-RAD BYD Shark Under Seat Radio Bracket Oct 2024 - Current A purpose-built Australian-made under seat radio bracket designed specifically for the BYD Shark, providing a clean and secure mounting solution for GME, Uniden, and other UHF radio units. Product Overview The GMF4x4 239-RAD is a vehicle-specific under seat radio bracket engineered for the BYD Shark (October 2024 to current). Mounting a UHF radio in a modern vehicle like the BYD Shark requires a bracket solution that fits the vehicle's interior geometry precisely, without resorting to improvised mounts, unsightly cable ties, or dashboard modifications. The GMF4x4 239-RAD solves this with a dedicated under seat mounting position that keeps the radio secure, accessible, and out of the way of passengers and cargo. Compatible with GME, Uniden, and other leading UHF radio brands, the 239-RAD offers broad radio unit flexibility while delivering the precise BYD Shark fitment that GMF4x4 is known for. As a proudly Australian-made product from the original creator of the bonnet hinge UHF mount, the 239-RAD carries the same engineering quality, material standards, and design integrity that defines the GMF4x4 range. GMF4x4 holds many registered designs, patents, and trademarks in Australia and internationally. Features & Benefits Purpose-Built for the BYD Shark: Designed specifically for the BYD Shark (October 2024 to current), the 239-RAD provides a precise under seat fit that generic or universal radio brackets cannot replicate, ensuring a secure and professional installation result. Clean Under Seat Mounting Position: Positions the UHF radio unit under the seat for a tidy, unobtrusive installation that keeps the cabin free from dashboard clutter while keeping the radio within easy reach of the driver or passenger. Broad Radio Brand Compatibility: Compatible with GME, Uniden, and other UHF radio brands, giving BYD Shark owners the flexibility to mount their preferred radio unit without being locked into a single brand solution. Proudly Made in Australia: Designed and manufactured in Australia by GMF4x4, the original creator of the bonnet hinge UHF mount, ensuring precise fitment, high-quality construction, and the assurance of genuine Australian engineering. Technical Specs Specification Detail Brand GMF4x4 SKU 239-RAD Type Under Seat Radio Mounting Bracket Mount Position Under Seat Compatible Radio Brands GME, Uniden and other UHF radio brands Country of Origin Australia Vehicle Make BYD Compatible With / Goes Well With Compatible Vehicles: Make Model Year Range Notes BYD Shark Oct 2024 - Current Under Seat Mount Goes Well With: GME UHF CB radios Uniden UHF CB radios Other UHF radio brands GMF4x4 BB-237P BYD Shark passenger side bonnet UHF antenna bracket GMF4x4 BB-237D BYD Shark driver side bonnet UHF antenna bracket UHF antenna coax cables and adaptors Frequently Asked Questions Which radio brands are compatible with the 239-RAD bracket? The GMF4x4 239-RAD is confirmed compatible with GME and Uniden UHF radio units, as well as other standard UHF radio brands. The bracket is designed to accommodate the mounting footprint of common UHF radio units used in Australian 4WD and commercial vehicle applications. If you are unsure whether your specific radio model will fit, please contact us before purchasing. Where exactly does the bracket mount in the BYD Shark? The 239-RAD mounts under the seat of the BYD Shark, utilising the under seat space to position the radio unit in a secure and accessible location without occupying dashboard or console space. The exact mounting point is specific to the BYD Shark interior configuration for October 2024 to current models. Does the 239-RAD require drilling or vehicle modification? Please contact us to confirm the exact installation method for the 239-RAD in your BYD Shark. GMF4x4 products are engineered for clean, precise fitment, and we recommend confirming installation details with our team or a professional installer prior to purchase. Can I pair the 239-RAD with a GMF4x4 bonnet antenna bracket? Yes. The 239-RAD pairs perfectly with the GMF4x4 BB-237P (passenger side) or BB-237D (driver side) bonnet hinge UHF antenna brackets for a complete, clean UHF communication setup in your BYD Shark. Together they provide a secure radio mount and a solid antenna position without any vehicle modification. Is professional installation recommended for the 239-RAD? Professional installation by a qualified auto electrician or car audio technician is recommended to ensure the bracket is correctly secured, the radio is properly wired, and all connections are safely integrated into the BYD Shark's electrical system.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 TG-222D GWM Tank 300 Tailgate Boot Hinge UHF Antenna Bracket - Driver Side The original Australian-made tailgate boot hinge UHF antenna bracket for the GWM Tank 300, pressed from 5mm powder coated steel and bolting directly to the driver side boot hinge with no drilling required and a 5 minute install. Product Overview The GMF4x4 TG-222D is a driver side tailgate UHF antenna bracket designed specifically for the GWM Tank 300. Bolting directly to the driver side boot hinge with no drilling or vehicle modification required, the TG-222D delivers a strong, clean, and permanent UHF antenna mounting position at the rear of the vehicle. Hardware and instructions are included in the box, making this a complete ready-to-install solution straight out of the packaging. Pressed from 5mm steel and finished in black powder coat, the TG-222D is built to the same engineering standard that has made GMF4x4 the strongest bonnet and tailgate bracket on the market. The bracket does not affect the opening of the tailgate, and all standard 4WD UHF antennas fit perfectly on the mount. As the original creator of the bonnet hinge UHF mount, GMF4x4 holds many registered designs, patents, and trademarks in Australia and internationally. Features & Benefits Driver Side Tailgate Boot Hinge Mount: Bolts directly to the driver side boot hinge of the GWM Tank 300, providing a solid and purpose-fitted UHF antenna position at the rear of the vehicle without affecting tailgate operation. No Drilling Required: The TG-222D requires absolutely no drilling into the vehicle body. It simply bolts on using existing hardware points, preserving the factory condition of the GWM Tank 300 and allowing the bracket to be removed and refitted cleanly. 5 Minute Installation: Designed for fast, straightforward installation with hardware and instructions included in the box. Most installations are completed within 5 minutes. Pressed 5mm Steel Construction: Manufactured from 5mm pressed steel, the TG-222D is the strongest tailgate antenna bracket on the market, engineered to handle vibration, off-road conditions, and the demands of daily 4WD use without flex or fatigue. Black Powder Coat Finish: The durable black powder coat finish provides long-lasting corrosion resistance and a clean, professional appearance that complements the GWM Tank 300's exterior styling in all Australian conditions. Hardware and Instructions Included: All mounting hardware and installation instructions are included, so the bracket is ready to bolt on straight out of the box with no additional components required. Universal UHF Antenna Compatibility: All standard 4WD UHF antennas fit perfectly on the GMF4x4 bracket mount, giving you complete flexibility to pair the TG-222D with your preferred UHF antenna brand and model. Proudly Made in Australia: Designed and manufactured in Australia by GMF4x4, the original creator of the bonnet hinge UHF mount, backed by registered designs, patents, and trademarks in Australia and internationally. Technical Specs Specification Detail Brand GMF4x4 SKU TG-222D Type Tailgate Boot Hinge UHF Antenna Bracket Side Driver Side Material 5mm Pressed Steel Finish Black Powder Coat Country of Origin Australia Drilling Required No Installation Time Approx. 5 Minutes Hardware Included Yes Instructions Included Yes Antenna Compatibility All 4WD UHF Antennas Tailgate Interference None Vehicle Make GWM Compatible With / Goes Well With Compatible Vehicles: Make Model Year Range Notes GWM Tank 300 Current Driver Side Boot Hinge Goes Well With: All 4WD UHF CB antennas UHF antenna coax cables and adaptors CB and UHF radios GME and Uniden UHF radio units Under seat or console radio mounting brackets Frequently Asked Questions What side does the TG-222D mount on? The TG-222D mounts on the driver side boot hinge of the GWM Tank 300. If you require a passenger side tailgate bracket, please contact us to confirm availability of the passenger side variant for the GWM Tank 300. Does the bracket affect the opening of the tailgate? No. The GMF4x4 TG-222D is engineered so that fitting the bracket does not affect the opening of the tailgate in any way. Full factory tailgate operation is retained after installation. Does the TG-222D require any drilling into the vehicle? No. The TG-222D bolts directly to the existing driver side boot hinge of the GWM Tank 300 using the included hardware. No drilling into the vehicle body is required at any point during installation. Which UHF antennas are compatible with the TG-222D? All standard 4WD UHF antennas fit perfectly on the GMF4x4 bracket mount. Whether you run a GME, Uniden, Oricom, or any other standard UHF antenna, it will fit without modification. Contact us if you need advice on selecting a suitable UHF antenna to pair with your bracket. Why should I choose GMF4x4 over other tailgate bracket brands? GMF4x4 is the original creator of the bonnet hinge UHF mount and brings the same proven engineering to the tailgate bracket range. The TG-222D is pressed from 5mm steel, making it the strongest bracket on the market, and is proudly made in Australia. GMF4x4 holds registered designs, patents, and trademarks in Australia and internationally, ensuring you are purchasing a genuine, quality-assured product.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 BB-224D Great Wall Cannon Alpha 2022+ Bonnet Hinge UHF Antenna Bracket - Driver Side The original Australian-made bonnet hinge UHF antenna bracket for the Great Wall Cannon Alpha, pressed from 5mm powder coated steel and bolting directly to the driver side bonnet hinge for a rock-solid, no-compromise UHF antenna mount. Product Overview The GMF4x4 BB-224D is a purpose-built driver side bonnet hinge UHF antenna bracket designed specifically for the Great Wall Cannon Alpha (2022 to current). As the original creator of the bonnet hinge UHF mount, GMF4x4 brings proven Australian engineering to the Great Wall Cannon Alpha platform, delivering the strongest and most reliable bonnet-mounted antenna solution on the market. The BB-224D bolts directly to the driver side bonnet hinge using the existing hardware points, requiring no drilling, cutting, or modification to the vehicle. The bracket is pressed from 5mm steel and finished with a durable powder coat black finish for long-term corrosion resistance in all Australian conditions. The bracket does not affect the opening of the bonnet or the operation of the windscreen wipers, making it a practical and interference-free installation. All 4WD UHF antennas are compatible with the GMF4x4 bracket mount, giving you full flexibility in antenna selection. GMF4x4 holds many registered designs, patents, and trademarks in Australia and internationally. Features & Benefits Original Bonnet Hinge UHF Mount Creator: GMF4x4 is the original inventor of the bonnet hinge UHF mount design. The BB-224D is the authentic product backed by registered designs, patents, and trademarks in Australia and internationally, not an imitation. Pressed 5mm Steel Construction: Manufactured from 5mm pressed steel for maximum strength and rigidity, the BB-224D is the strongest bonnet antenna bracket on the market, built to withstand vibration, off-road conditions, and the demands of daily 4WD use. Powder Coated Black Finish: The durable powder coat black finish provides long-lasting protection against corrosion, UV exposure, and the harsh Australian environment, maintaining a clean and professional appearance over the life of the bracket. Proudly Made in Australia: Designed and manufactured in Australia specifically for the Great Wall Cannon Alpha, ensuring precise fitment and the quality assurance of local engineering and production standards. No Bonnet or Wiper Interference: The BB-224D is engineered so that fitting the bracket does not affect the opening of the bonnet or the operation of the windscreen wipers, maintaining full factory functionality after installation. Universal UHF Antenna Compatibility: All 4WD UHF antennas fit perfectly on the GMF4x4 bracket mount, giving you complete freedom to pair the BB-224D with your preferred UHF antenna brand and model. Technical Specs Specification Detail Brand GMF4x4 SKU BB-224D Type Bonnet Hinge UHF Antenna Bracket Side Driver Side Material 5mm Pressed Steel Finish Powder Coated Black Country of Origin Australia Antenna Compatibility All 4WD UHF Antennas Bonnet Interference None Wiper Interference None Vehicle Make Great Wall Compatible With / Goes Well With Compatible Vehicles: Make Model Year Range Notes Great Wall Cannon Alpha 2022 - Current Driver Side Bonnet Hinge Goes Well With: All 4WD UHF CB antennas UHF antenna coax cables and adaptors CB and UHF radios Passenger side bracket GMF4x4 BB-224P (for dual antenna setup) GME and Uniden UHF radio units Frequently Asked Questions What side does the BB-224D mount on? The BB-224D is the driver side bonnet hinge bracket. It bolts directly to the driver side bonnet hinge of the Great Wall Cannon Alpha (2022 to current). If you require a passenger side bracket, please purchase the GMF4x4 BB-224P instead. Both brackets can be used together for a dual antenna setup. Will the bracket affect my bonnet or windscreen wipers? No. The GMF4x4 BB-224D is specifically engineered so that it does not affect the opening of the bonnet or the operation of the windscreen wipers. Full factory bonnet and wiper functionality is retained after installation. Does the BB-224D work with my UHF antenna brand? Yes. The GMF4x4 BB-224D is compatible with all 4WD UHF antennas, giving you complete flexibility to use your preferred antenna brand and model. Whether you run an Oricom, GME, Uniden, or any other standard UHF antenna, it will fit perfectly on the bracket mount. Why should I choose GMF4x4 over other bonnet bracket brands? GMF4x4 is the original creator of the bonnet hinge UHF mount and holds registered designs, patents, and trademarks in Australia and internationally. The BB-224D is pressed from 5mm steel, making it the strongest bracket on the market, and is proudly made in Australia. Imitation brackets do not carry the same engineering credentials, material quality, or legal protections as the genuine GMF4x4 product. Does the BB-224D require drilling or vehicle modification? No. The BB-224D bolts directly to the existing driver side bonnet hinge of the Great Wall Cannon Alpha without any drilling, cutting, or modification to the vehicle. This preserves the factory condition of the vehicle and makes the bracket straightforward to install and remove if needed.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 BB-227P Ford Falcon BF 2005-2008 Bonnet Hinge UHF Antenna Bracket The original Australian-made bonnet hinge UHF antenna bracket custom-engineered for the Ford Falcon BF, pressed from 5mm powder coated steel and bolting directly to the bonnet hinge with no drilling required for a rock-solid UHF antenna mount. Product Overview The GMF4x4 BB-227P is a purpose-built bonnet hinge UHF antenna bracket designed specifically for the Ford Falcon BF (2005-2008). As the original creator of the bonnet hinge UHF mount, GMF4x4 brings proven Australian engineering to the Falcon BF platform, delivering the strongest and most reliable bonnet-mounted antenna solution on the market for this iconic Australian vehicle. The BB-227P bolts directly to the bonnet hinge using the existing hardware points, requiring no drilling, cutting, or modification to the vehicle. Pressed from 5mm steel and finished in black powder coat, the bracket is built to withstand rough tracks, harsh weather, and the demands of daily 4WD and work use without flex or fatigue. The bracket does not affect the opening of the bonnet or the operation of the windscreen wipers, and all standard 4WD UHF antennas fit perfectly on the mount. Please note the BB-227P is not compatible with the Ford Falcon FG model. GMF4x4 holds many registered designs, patents, and trademarks in Australia and internationally. Features & Benefits Original Bonnet Hinge UHF Mount Creator: GMF4x4 is the original inventor of the bonnet hinge UHF mount design. The BB-227P is the authentic product backed by registered designs, patents, and trademarks in Australia and internationally, not an imitation. Pressed 5mm Steel Construction: Manufactured from 5mm pressed steel for maximum strength and rigidity, the BB-227P is the strongest bonnet antenna bracket on the market, built to withstand vibration, off-road conditions, and the demands of daily use without flex or fatigue. Powder Coated Black Finish: The durable powder coat black finish provides long-lasting protection against corrosion, UV exposure, and the harsh Australian environment, maintaining a clean and professional appearance over the life of the bracket. No Drilling Required: The BB-227P bolts directly to the existing bonnet hinge of the Ford Falcon BF using existing hardware points, requiring no drilling or cutting into the vehicle body and preserving the factory condition of the vehicle. No Bonnet or Wiper Interference: Engineered so that fitting the bracket does not affect the opening of the bonnet or the operation of the windscreen wipers, maintaining full factory functionality after installation. Proudly Made in Australia: Designed and manufactured in Australia specifically for the Ford Falcon BF, ensuring precise fitment and the quality assurance of local engineering and production standards. Universal UHF Antenna Compatibility: All standard 4WD UHF antennas fit perfectly on the GMF4x4 bracket mount, giving you complete freedom to pair the BB-227P with your preferred UHF antenna brand and model. Technical Specs Specification Detail Brand GMF4x4 SKU BB-227P Type Bonnet Hinge UHF Antenna Bracket Material 5mm Pressed Steel Finish Powder Coated Black Country of Origin Australia Drilling Required No Antenna Compatibility All 4WD UHF Antennas Bonnet Interference None Wiper Interference None Vehicle Make Ford Not Compatible With Ford Falcon FG Compatible With / Goes Well With Compatible Vehicles: Make Model Year Range Notes Ford Falcon BF 2005-2008 Bonnet Hinge Mount Goes Well With: All 4WD UHF CB antennas UHF antenna coax cables and adaptors CB and UHF radios GME and Uniden UHF radio units Under seat or console radio mounting brackets Frequently Asked Questions Is the BB-227P compatible with the Ford Falcon FG? No. The GMF4x4 BB-227P is specifically engineered for the Ford Falcon BF (2005-2008) only and is not compatible with the Ford Falcon FG model. The bonnet hinge dimensions and hardware points differ between BF and FG variants. If you own a Falcon FG, please contact us to confirm the correct bracket for your vehicle. Does the bracket affect the opening of the bonnet or windscreen wipers? No. The GMF4x4 BB-227P is specifically engineered so that it does not affect the opening of the bonnet or the operation of the windscreen wipers. Full factory bonnet and wiper functionality is retained after installation. Does the BB-227P require any drilling into the vehicle? No. The BB-227P bolts directly to the existing bonnet hinge of the Ford Falcon BF using existing hardware points. No drilling or cutting into the vehicle body is required at any point during installation. Which UHF antennas are compatible with the BB-227P? All standard 4WD UHF antennas fit perfectly on the GMF4x4 bracket mount. Whether you run a GME, Uniden, Oricom, or any other standard UHF antenna, it will fit without modification. Contact us if you need advice on selecting a suitable UHF antenna to pair with your bracket. Why should I choose GMF4x4 over other bonnet bracket brands? GMF4x4 is the original creator of the bonnet hinge UHF mount and holds registered designs, patents, and trademarks in Australia and internationally. The BB-227P is pressed from 5mm steel, making it the strongest bracket on the market, and is proudly made in Australia. Imitation brackets do not carry the same engineering credentials, material quality, or legal protections as the genuine GMF4x4 product.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Heavy-duty UHF antenna mounting engineered specifically for VW Transporter T5 owners who demand reliable communication on every journey. The GMF4x4 BB-071P is a vehicle-specific UHF antenna bonnet bracket designed exclusively for the VW Transporter Citvan T5 (2007-2010). This Australian-made bracket bolts directly to the passenger side bonnet hinge, eliminating the need for drilling or permanent modifications. Constructed from 5mm pressed steel with a durable black powder coat finish, it delivers superior strength and longevity in Australian touring conditions. The bracket accepts all standard 4WD UHF antennas and maintains full bonnet functionality after installation. Key Specifications Compatible with VW Transporter Citvan T5 (2007-2010) passenger side bonnet hinge 5mm pressed steel construction for maximum durability Black powder coated finish for corrosion resistance Bolt-on installation requiring no drilling or permanent modification Universal fitment for all standard 4WD UHF antennas Installation time approximately 5 minutes Proudly manufactured in Australia Features & Benefits Pressed 5mm Steel Construction – Engineered from heavy-duty pressed steel, this bracket withstands the harshest Australian conditions including corrugations, rough terrain, and extreme temperatures without flexing or failure. No-Drill Bolt-On Design – Attaches directly to existing bonnet hinge bolt points, preserving your vehicle's factory finish and resale value while ensuring a secure, rattle-free mount. Black Powder Coat Finish – Professional-grade powder coating resists UV damage, stone chips, and corrosion from salt air, maintaining appearance throughout years of touring and daily use. Maintains Bonnet Operation – Strategically positioned to allow full bonnet opening and closing without interference, ensuring convenient access to engine bay for maintenance and inspections. Universal UHF Antenna Compatibility – Accepts all standard 4WD UHF antenna bases, giving you flexibility to choose your preferred communication equipment without adaptor requirements. Australian-Made Quality – Manufactured locally to exacting standards, ensuring precise fitment and supporting Australian manufacturing while reducing international shipping delays. Technical Specs Material: 5mm pressed steel Finish: Black powder coat Mounting location: Passenger side bonnet hinge Fitment type: Direct bolt-on, no drilling required Installation time: Approximately 5 minutes Antenna compatibility: Universal 4WD UHF antenna fitment Country of manufacture: Australia Includes: Mounting hardware and installation instructions Frequently Asked Questions Does this bracket fit the driver side bonnet hinge? This specific model (BB-071P) is designed for passenger side fitment. A separate driver side model is available if required. Will this affect my bonnet opening or closing? No, the bracket is engineered to maintain full bonnet operation without interference or restriction during opening and closing cycles. Do I need to drill holes in my bonnet? No drilling required. The bracket bolts directly to existing bonnet hinge mounting points using supplied hardware for a secure, reversible installation. What UHF antennas are compatible with this bracket? All standard 4WD UHF antennas with universal mounting bases will fit this bracket, giving you complete flexibility in antenna selection. Is installation hardware included? Yes, all necessary mounting hardware and detailed installation instructions are included for immediate fitment upon delivery. Compatible With VW Transporter Citvan T5 (2007-2010) passenger side bonnet hinge All standard 4WD UHF antennas with universal mounting bases GME, Uniden, and other major brand UHF communication systems RG58 or equivalent coaxial antenna cables UHF radio systems for touring, work, and recreational use Note: Verify your VW Transporter model year and variant before ordering. This bracket is specific to T5 Citvan models produced between 2007-2010. Legendary Products & Support From Authorized Dealers When you choose GMF4X4, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized GMF4X4 dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by GMF4X4's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI FELM-BK Stowaway Electric Folding Mount Bracket - Heavy-Duty Australian-Engineered Powder-Coated Aluminium Mounting Solution for Mining, Agricultural, and Construction Antenna Installations with 1-Year Warranty Achieve professional-grade antenna mounting in extreme work environments with RFI FELM-BK Stowaway Electric Folding Mount Bracket—featuring rugged powder-coated 4mm aluminium casing engineered specifically for demanding mining, agricultural, and construction applications where durability and reliability are paramount, Australian engineering excellence ensuring product designed and tested for harsh Australian conditions including extreme temperatures, dust, vibration, and moisture exposure, corrosion-resistant stainless steel fasteners providing long-term reliability in corrosive environments including coastal areas, chemical exposure, and wet conditions, versatile multiple mounting position capability allowing flexible installation configurations accommodating diverse vehicle types, equipment mounting locations, and antenna positioning requirements, electric folding functionality enabling quick antenna deployment for operational use and secure stowage during transport or low-clearance situations, comprehensive step-by-step installation guide included eliminating guesswork and ensuring proper mounting technique for optimal performance and safety, robust 4mm aluminium construction providing exceptional strength-to-weight ratio resisting impact damage, structural fatigue, and environmental degradation, powder-coated finish delivering superior surface protection against scratches, chips, UV degradation, and weather exposure maintaining professional appearance throughout service life, backed by comprehensive 1-year manufacturer warranty providing confidence in product quality and long-term reliability, and proven Stowaway engineering delivering dependable antenna mounting solution for heavy equipment, commercial vehicles, mining operations, agricultural machinery, and construction site installations requiring industrial-grade mounting hardware. Product Overview The durable mounting bracket – designed for demanding mining, agricultural, and construction environments. Engineered in Australia. Backed with a 1-year warranty. RFI FELM-BK Stowaway Electric Folding Mount Bracket provides robust antenna mounting solution specifically engineered for harsh industrial and commercial applications. Powder-coated 4mm aluminium construction delivers exceptional durability while maintaining manageable weight for installation. Electric folding mechanism enables quick antenna positioning changes between operational deployment and transport stowage. Australian engineering ensures design optimized for local conditions and compliance with Australian standards. Multiple mounting positions accommodate various vehicle configurations and antenna types. Stainless steel fasteners resist corrosion in coastal, chemical, and moisture-rich environments common in mining, agricultural, and construction operations. Full step-by-step installation guide included providing clear instructions for proper mounting, electrical connection, and operation ensuring safe and reliable installation. Key Features Heavy-Duty 4mm Aluminium Construction - Robust powder-coated 4mm aluminium casing provides exceptional structural strength and impact resistance while maintaining lightweight design for easier installation and reduced vehicle weight. Australian-Engineered for Harsh Conditions - Designed and engineered in Australia specifically for demanding local conditions including extreme heat, dust, vibration, and moisture exposure common in mining, agricultural, and construction environments. Corrosion-Resistant Stainless Steel Fasteners - Premium stainless steel mounting hardware resists rust and corrosion in harsh environments including coastal areas, chemical exposure, and wet conditions ensuring long-term reliability. Electric Folding Mechanism - Convenient electric operation enables quick antenna deployment for operational use and secure stowage during transport or when navigating low-clearance areas protecting antenna from damage. Multiple Mounting Position Capability - Versatile design allows various mounting configurations accommodating different vehicle types, equipment mounting locations, and antenna positioning requirements for flexible installation. Powder-Coated Surface Protection - Durable powder-coat finish provides superior protection against scratches, chips, UV degradation, and weather exposure maintaining professional appearance throughout service life. Comprehensive Installation Guide Included - Full step-by-step installation instructions eliminate guesswork ensuring proper mounting technique, electrical connection, and safe operation. 1-Year Manufacturer Warranty - Comprehensive warranty coverage provides confidence in product quality and long-term reliability backed by Australian manufacturer support. Technical Specifications Specification Details Model FELM-BK SKU FELM-BK Brand RFI Product Line Stowaway Product Type Electric Folding Antenna Mount Bracket Construction Material 4mm Aluminium (Powder-Coated) Finish Powder-Coated Fastener Type Stainless Steel Operation Type Electric Folding Mechanism Mounting Positions Multiple position capability Engineering Origin Australian Engineered Warranty Period 1 Year Included Documentation Full step-by-step installation guide Target Applications Mining, Agricultural, Construction environments Corrosion Protection Powder-coat finish with stainless steel hardware Material Thickness 4mm Aluminium Component Type Heavy-Duty Antenna Mounting Bracket Frequently Asked Questions Q: What makes FELM-BK suitable for mining and construction environments? A: FELM-BK engineered specifically for demanding industrial applications featuring robust 4mm aluminium construction resisting impact damage from debris, equipment contact, or rough terrain exposure. Powder-coated finish protects against dust, dirt, chemical exposure, and moisture common in mining and construction sites. Stainless steel fasteners resist corrosion from exposure to chemicals, water, and harsh environmental conditions. Electric folding mechanism protects expensive antennas during equipment transport or when navigating underground mining tunnels, construction site obstacles, or low-clearance areas. Australian engineering ensures design tested for extreme local conditions. Q: How does the electric folding mechanism operate? A: FELM-BK features electric folding mechanism enabling remote antenna positioning control. Deploy antenna vertically for operational communication, activate electric mechanism to fold antenna horizontally for transport or low-clearance navigation. Electric operation eliminates manual antenna adjustment improving operator convenience and safety. Requires electrical connection to vehicle power system (installation guide provides detailed wiring instructions). Benefits: quick deployment, secure stowage, antenna protection during transport, convenient operation from vehicle cab. Q: What antenna types are compatible with FELM-BK? A: FELM-BK designed for UHF/CB antenna mounting in commercial and industrial applications. Multiple mounting position capability accommodates various antenna sizes and types. Verify specific antenna weight and mounting requirements ensuring compatibility with bracket load capacity. Suitable for heavy-duty commercial-grade antennas used in mining, construction, and agricultural operations. Check antenna mounting hardware compatibility with FELM-BK before purchase. Q: Is FELM-BK suitable for coastal marine environments? A: Yes—FELM-BK features stainless steel fasteners and powder-coated aluminium construction providing corrosion resistance suitable for coastal applications. Powder-coat finish protects aluminium from saltwater spray and moisture exposure. Stainless steel hardware resists rust in marine environments. Regular freshwater rinsing and maintenance recommended for installations in direct saltwater spray zones. Originally designed for mining/agricultural/construction but corrosion-resistant construction suitable for coastal commercial vehicle applications. Q: What is included with FELM-BK purchase? A: FELM-BK includes complete mounting bracket assembly with powder-coated 4mm aluminium casing, electric folding mechanism, stainless steel mounting fasteners (bolts, nuts, washers), and comprehensive step-by-step installation guide with detailed instructions for mounting, electrical connection, and operation. Installation guide provides wiring diagrams, torque specifications, and safety information ensuring proper installation. Verify complete kit contents upon receipt before beginning installation. Q: Does FELM-BK require professional installation? A: FELM-BK installation suitable for experienced DIY installers with mechanical and basic electrical skills. Full step-by-step installation guide included providing detailed instructions. Installation requires: secure mounting surface with adequate structural support, electrical connection to vehicle power system (12V/24V depending on vehicle), proper torque specifications for fasteners, electrical knowledge for safe wiring connection. Professional installation recommended for users unfamiliar with vehicle electrical systems or lacking appropriate tools. Improper installation may affect warranty coverage—follow installation guide carefully ensuring compliance with all specifications and safety requirements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI MAM-CDQ White Marine Knock Down Mount with CDQ Adaptor and 5m FME(F) Cable - Complete Professional Lay-Down Marine Antenna Package for RFI CDQ Series Whips with Adjustable Mounting and Pre-Terminated Cable Achieve professional marine antenna installation with RFI MAM-CDQ Complete Marine Knock Down Mount Package—featuring innovative knock-down design allowing CDQ series whips to be laid horizontal when not in use protecting antenna from damage during trailering or storage, complete package including MAM-101 marine mount, MM-CDQ CDQ series adaptor, and 5m white RG58 cable pre-terminated with FME female connector, adjustable mounting capability accommodating non-level mounting surfaces ensuring proper antenna positioning on various vessels, marine-grade white finish complementing boat and marine equipment aesthetics while resisting harsh saltwater environments, versatile application suitability for marine vessels, caravans, motorhomes, hire equipment, and freight vehicles, wide RFI antenna compatibility including CDQ7100 Series and CDQ5000 Series whips, complete stainless steel mounting hardware package including 4 bolts, nuts, and washers eliminating separate fastener purchase, ready-to-install convenience with factory-terminated cable and included adaptor, lay-down functionality protecting expensive antennas during transportation preventing damage from low bridges or clearance issues, durable marine-grade construction resisting corrosion and environmental degradation in harsh conditions, and proven RFI quality engineering delivering reliable complete marine antenna mounting solution for vessels and vehicles requiring protective antenna stowage capability with professional cable management. Product Overview Marine knock-down mount suits CDQ series whips. MAM-CDQ mount allows CDQ style whips to be laid down when not in use. Can be adjusted to accommodate non-level mounting surfaces. Suitable for marine, caravans, motor homes, hire equipment and freight vehicles. Compatible with a wide range of RFI antennas including CDQ7100 Series and CDQ5000 series. Made up using: 1 x MAM-101 Marine Knock Down Mount, 1 x MM-CDQ CD Series Adaptor C/W 5m white RG58 cable terminated with a FME female connector. Includes: 4 x stainless steel mounting bolts, nuts & washers. Key Features Complete Package for CDQ Series Whips - Ready-to-install system includes MAM-101 mount, MM-CDQ adaptor, 5m pre-terminated cable, and stainless steel hardware eliminating separate component purchases. Knock-Down Design for Antenna Protection - Innovative lay-down mechanism allows CDQ series whips to be positioned horizontal when not in use protecting from damage during trailering, storage, or low clearance situations. Adjustable for Non-Level Surfaces - Versatile mounting adjustment accommodates non-level mounting surfaces ensuring proper antenna positioning on various vessel decks or vehicle surfaces. Pre-Terminated 5m White RG58 Cable with FME(F) - Factory-terminated 5-meter white cable with FME female connector provides professional installation without requiring custom cable termination. Wide RFI Antenna Compatibility - Compatible with extensive range of RFI antennas including CDQ7100 Series and CDQ5000 Series whips ensuring versatile antenna selection. Versatile Application Suitability - Suitable for marine vessels, caravans, motorhomes, hire equipment, and freight vehicles providing flexible mounting solution across diverse applications. Technical Specifications Specification Details Model MAM-CDQ SKU MAM-CDQ Brand RFI Product Type Complete Marine Knock Down Antenna Mount Package Color/Finish White (Marine-Grade) Design Knock-down/Lay-down mechanism with adjustable mounting Package Contents 1 × MAM-101 Marine Knock Down Mount, 1 × MM-CDQ CDQ Series Adaptor, 5m white RG58 cable with FME(F) connector, 4 × Stainless steel bolts/nuts/washers Cable Type White RG58 Cable Length 5 meters Cable Termination FME Female connector (pre-terminated) Antenna Compatibility RFI CDQ Series whips (CDQ7100 Series, CDQ5000 Series) Mounting Surface Adjustment Adjustable for non-level surfaces Included Hardware 4 × Stainless steel bolts, nuts, and washers Corrosion Protection Marine-grade white finish with stainless steel hardware Application Marine vessels, Caravans, Motorhomes, Hire equipment, Freight vehicles Component Type Complete Marine Antenna Mount Package Frequently Asked Questions Q: What is the difference between MAM-CDQ and MAM-101? A: MAM-CDQ complete package includes MAM-101 marine mount PLUS MM-CDQ adaptor and 5m pre-terminated white RG58 cable with FME(F) connector. MAM-101 mount only requiring separate adaptor and cable purchase. Choose MAM-CDQ for ready-to-install convenience with all components included. Choose MAM-101 when specific adaptor (MM-001 for CD Series) or custom cable length required. MAM-CDQ specifically designed for CDQ series whips providing complete installation package. Q: What RFI antennas are compatible with MAM-CDQ? A: MAM-CDQ compatible with wide range of RFI CDQ series whips including CDQ7100 Series and CDQ5000 Series antennas. MM-CDQ adaptor included in package specifically designed for CDQ series antenna threading. Verify specific antenna compatibility with CDQ designation before purchase. Not compatible with RFI CD Series antennas (requiring MM-001 adaptor instead). Q: How does adjustable mounting work for non-level surfaces? A: MAM-CDQ features adjustable mounting capability compensating for non-level boat decks or vehicle mounting surfaces. Adjustment ensures antenna vertical positioning despite angled mounting surface. Benefits: proper antenna orientation for optimal performance, flexibility for various vessel deck angles, accommodation of curved or irregular mounting surfaces. Adjust mount during installation achieving proper antenna vertical alignment regardless of surface angle. Q: Can MAM-CDQ be used on caravans and motorhomes? A: Yes—MAM-CDQ suitable for marine vessels, caravans, motorhomes, hire equipment, and freight vehicles. Lay-down capability particularly beneficial for caravans and motorhomes during travel preventing antenna damage from low bridges or overpasses. Deploy antenna vertically when stationary for communication, lay horizontal during transport. White marine-grade finish and stainless steel hardware provide durability across diverse applications beyond marine use. Q: What do I need to connect FME(F) cable to my radio? A: MAM-CDQ cable pre-terminated with FME female connector. Most mobile radios use standard UHF/PL259 antenna connections requiring FME to UHF adaptor (typically FME male to UHF male adaptor). Purchase appropriate adaptor separately or verify radio antenna socket type. Some marine radios feature FME connections enabling direct cable connection without adaptor. Check radio specifications confirming antenna connector type for proper connection.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less