AXIS CR16 - AM/FM Antenna Extension 0.5M 0.5-metre Harada-compatible AM/FM antenna extension cable designed for extending factory car radio antenna connections where additional cable length is required between antenna and head unit, compatible with Harada antenna systems commonly fitted to Japanese and Australian-delivered vehicles, enables antenna relocation during dashboard modifications or aftermarket head unit installations requiring extended cable reach, suitable for vehicles with factory antenna mounting relocated during bull bar installation, roof rack additions, or body panel replacements, ideal for custom car audio installations, vehicle modifications requiring antenna repositioning, and any application where standard factory antenna cable length is insufficient to reach relocated head units or modified mounting positions. Product Overview The AXIS CR16 is a 0.5-metre antenna extension cable engineered for Harada antenna systems, the predominant factory antenna brand fitted to many Japanese-manufactured vehicles sold in Australia including Toyota, Nissan, Mazda, Honda, Subaru, and Mitsubishi models. When installing aftermarket head units, relocating dashboards, or modifying vehicle bodywork, the factory antenna cable often becomes too short to reach the new head unit location. This extension cable provides the additional half-metre of length needed to bridge the gap between antenna base and relocated head unit without requiring complete antenna replacement. The Harada-compatible connectors ensure proper fitment with factory antenna systems maintaining signal quality for AM and FM radio reception. Common scenarios requiring extension cables include: installing double-DIN head units in vehicles originally fitted with single-DIN units requiring dashboard relocation, mounting head units in custom console locations, relocating antennas during bull bar installation where original fender mounting is obstructed, or routing antenna cables around newly installed equipment like UHF radios or amplifiers occupying original cable routing space. Important Notes: Harada System Specific: This extension is designed for Harada antenna systems. Verify your vehicle uses Harada antennas before purchasing. 0.5 Metre Length Only: Provides 0.5m additional reach. If you need more length, multiple extensions can be connected but signal degradation may occur. Signal Quality: Each extension introduces slight signal loss. Minimize extensions where possible for optimal AM/FM reception. Connector Compatibility: Ensure connectors match your specific Harada antenna configuration. Some models have different connector types. Not Universal: This is NOT a universal antenna extension. It's specifically for Harada systems common in Japanese vehicles. Key Features Harada Compatible - Designed for Harada antenna systems fitted to many Japanese and Australian-delivered vehicles. 0.5 Metre Length - Provides additional cable reach for relocated head units or modified installations. AM/FM Signal - Maintains radio frequency signal transmission for standard broadcast radio reception. Factory Connector Match - Compatible connectors ensure proper fitment with existing Harada antenna systems. Dashboard Modification Solution - Enables head unit relocation during custom dashboard installations or double-DIN upgrades. Antenna Relocation - Allows antenna repositioning when factory mounting is obstructed by accessories or body modifications. Aftermarket Head Unit Installation - Bridges gap between factory antenna and relocated aftermarket stereo systems. Bull Bar Compatible - Accommodates antenna relocation when bull bars obstruct original fender mounting positions. Custom Audio Installation - Facilitates professional car audio installations requiring non-standard cable routing. Vehicle Modification Ready - Suits vehicles with body panel replacements or modifications affecting antenna cable routing. Quality Construction - Maintains signal integrity over 0.5-metre extension minimizing reception degradation. Toyota/Nissan/Mazda Fitment - Compatible with Harada systems commonly used in these manufacturers' vehicles. Professional Installation - Enables clean cable routing during professional automotive electrical modifications. Cost-Effective Solution - Extends existing antenna system without requiring complete antenna replacement. Standard AM/FM Bands - Covers standard broadcast AM (530-1710kHz) and FM (88-108MHz) frequency ranges. Technical Specifications Specification Details Brand AXIS Model CR16 SKU CR16 Product Type Antenna Extension Cable Description Harada Antenna Extension - 50cm Length 0.5 Metre (50cm) Compatibility Harada Antenna Systems Signal Type AM/FM Radio Warranty Standard Manufacturer Warranty Frequently Asked Questions Q: How do I know if my vehicle has a Harada antenna system? A: Check your vehicle's antenna base or consult your vehicle manual. Harada is common on Japanese-manufactured vehicles including many Toyota, Nissan, Mazda, Honda, Subaru, and Mitsubishi models. If your antenna is factory-fitted and you drive a Japanese vehicle, there's good probability it's Harada. Alternatively, check the connector at the back of your head unit - compare with product images or bring photos to us for verification. Q: Will this extension reduce my radio reception quality? A: Yes, but minimally. Each extension introduces slight signal loss - typically 1-2dB per metre. For 0.5m extension, most users won't notice reception quality change in strong signal areas. In marginal reception areas (rural locations, underground car parks), you may experience slightly reduced clarity. Minimize extensions where possible and avoid connecting multiple extensions which compound signal loss. Q: Can I connect multiple CR16 extensions together for longer reach? A: Physically yes, but not recommended. Each additional extension increases signal loss. Two 0.5m extensions (1m total) will noticeably degrade AM reception, particularly affecting weaker stations. If you need more than 0.5m extension, consider relocating your head unit closer to antenna, or installing new antenna with longer factory cable. Q: Will this work with my aftermarket head unit? A: Yes, if your vehicle originally had a Harada antenna system. The extension goes between factory Harada antenna and any head unit (factory or aftermarket). The extension doesn't care about head unit brand - it simply extends the antenna cable. Ensure your aftermarket head unit has appropriate antenna input connector matching your vehicle's factory setup. Q: Can I use this for amplified or powered antennas? A: If your Harada antenna is powered (receives 12V from head unit for amplification), this extension should maintain power transmission. However, voltage drop over extensions may affect amplifier performance. Test before permanent installation to ensure powered antenna operates correctly. Most factory Harada antennas are passive and don't require power. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AXIS CR813 - AM/FM Antenna Extension 3M 3-metre Harada-compatible AM/FM antenna extension cable designed for extending factory car radio antenna connections where additional cable length is required between antenna and head unit, compatible with Harada antenna systems commonly fitted to Japanese and Australian-delivered vehicles, enables antenna relocation during dashboard modifications or aftermarket head unit installations requiring extended cable reach, suitable for vehicles with factory antenna mounting relocated during bull bar installation, roof rack additions, or body panel replacements, ideal for custom car audio installations, vehicle modifications requiring antenna repositioning, and any application where standard factory antenna cable length is insufficient to reach relocated head units or modified mounting positions. Product Overview The AXIS CR813 is a 3-metre antenna extension cable engineered for Harada antenna systems, the predominant factory antenna brand fitted to many Japanese-manufactured vehicles sold in Australia including Toyota, Nissan, Mazda, Honda, Subaru, and Mitsubishi models. When installing aftermarket head units, relocating dashboards, or modifying vehicle bodywork, the factory antenna cable often becomes too short to reach the new head unit location. This extension cable provides the additional three metres of length needed to bridge the gap between antenna base and relocated head unit without requiring complete antenna replacement. The Harada-compatible connectors ensure proper fitment with factory antenna systems maintaining signal quality for AM and FM radio reception. Common scenarios requiring extension cables include: installing double-DIN head units in vehicles originally fitted with single-DIN units requiring dashboard relocation, mounting head units in custom console locations, relocating antennas during bull bar installation where original fender mounting is obstructed, or routing antenna cables around newly installed equipment like UHF radios or amplifiers occupying original cable routing space. Important Notes: Harada System Specific: This extension is designed for Harada antenna systems. Verify your vehicle uses Harada antennas before purchasing. 3 Metre Length: Provides 3m additional reach. Longer extensions may introduce more signal loss than shorter alternatives. Signal Quality: Each extension introduces slight signal loss. Minimize extensions where possible for optimal AM/FM reception. Connector Compatibility: Ensure connectors match your specific Harada antenna configuration. Some models have different connector types. Not Universal: This is NOT a universal antenna extension. It's specifically for Harada systems common in Japanese vehicles. Key Features Harada Compatible - Designed for Harada antenna systems fitted to many Japanese and Australian-delivered vehicles. 3 Metre Length - Provides extended cable reach for relocated head units or modified installations requiring longer runs. AM/FM Signal - Maintains radio frequency signal transmission for standard broadcast radio reception. Factory Connector Match - Compatible connectors ensure proper fitment with existing Harada antenna systems. Dashboard Modification Solution - Enables head unit relocation during custom dashboard installations or double-DIN upgrades. Antenna Relocation - Allows antenna repositioning when factory mounting is obstructed by accessories or body modifications. Aftermarket Head Unit Installation - Bridges gap between factory antenna and relocated aftermarket stereo systems. Bull Bar Compatible - Accommodates antenna relocation when bull bars obstruct original fender mounting positions. Custom Audio Installation - Facilitates professional car audio installations requiring non-standard cable routing. Vehicle Modification Ready - Suits vehicles with body panel replacements or modifications affecting antenna cable routing. Quality Construction - Maintains signal integrity over 3-metre extension minimizing reception degradation. Toyota/Nissan/Mazda Fitment - Compatible with Harada systems commonly used in these manufacturers' vehicles. Professional Installation - Enables clean cable routing during professional automotive electrical modifications. Cost-Effective Solution - Extends existing antenna system without requiring complete antenna replacement. Standard AM/FM Bands - Covers standard broadcast AM (530-1710kHz) and FM (88-108MHz) frequency ranges. Technical Specifications Specification Details Brand AXIS Model CR813 SKU CR813 Product Type Antenna Extension Cable Description Harada Antenna Extension - 3m Length 3 Metres Compatibility Harada Antenna Systems Signal Type AM/FM Radio Warranty Standard Manufacturer Warranty Frequently Asked Questions Q: How do I know if my vehicle has a Harada antenna system? A: Check your vehicle's antenna base or consult your vehicle manual. Harada is common on Japanese-manufactured vehicles including many Toyota, Nissan, Mazda, Honda, Subaru, and Mitsubishi models. If your antenna is factory-fitted and you drive a Japanese vehicle, there's good probability it's Harada. Alternatively, check the connector at the back of your head unit - compare with product images or bring photos to us for verification. Q: Will this 3-metre extension reduce my radio reception quality? A: Yes, longer extensions introduce more signal loss than shorter ones. A 3m extension typically causes 3-6dB signal loss depending on cable quality and frequency. In strong signal areas (metropolitan locations, near transmission towers), this loss is usually acceptable. In marginal reception areas (rural locations, valleys, underground car parks), you may experience noticeably reduced reception quality, particularly for weaker AM stations. Test reception after installation and consider relocating head unit closer to antenna if reception is unsatisfactory. Q: Can I connect multiple extensions together for even longer reach? A: Not recommended. Connecting multiple extensions compounds signal loss significantly. A 3m extension already introduces moderate signal degradation - adding another extension would likely result in poor reception, especially for AM radio. If 3m is insufficient, consider: (1) relocating your head unit closer to the antenna, (2) relocating your antenna closer to the head unit, or (3) installing a new antenna with longer factory cable. Q: Will this work with my aftermarket head unit? A: Yes, if your vehicle originally had a Harada antenna system. The extension goes between factory Harada antenna and any head unit (factory or aftermarket). The extension doesn't care about head unit brand - it simply extends the antenna cable. Ensure your aftermarket head unit has appropriate antenna input connector matching your vehicle's factory setup. Q: Can I use this for amplified or powered antennas? A: If your Harada antenna is powered (receives 12V from head unit for amplification), this extension should maintain power transmission. However, voltage drop over 3m extension may affect amplifier performance more than shorter extensions. Test before permanent installation to ensure powered antenna operates correctly. Most factory Harada antennas are passive and don't require power.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AXIS CR814 - AM/FM Antenna Extension 4M 4-metre Harada-compatible AM/FM antenna extension cable designed for extending factory car radio antenna connections where additional cable length is required between antenna and head unit, compatible with Harada antenna systems commonly fitted to Japanese and Australian-delivered vehicles, enables antenna relocation during dashboard modifications or aftermarket head unit installations requiring extended cable reach, suitable for vehicles with factory antenna mounting relocated during bull bar installation, roof rack additions, or body panel replacements, ideal for custom car audio installations, vehicle modifications requiring antenna repositioning, and any application where standard factory antenna cable length is insufficient to reach relocated head units or modified mounting positions. Product Overview The AXIS CR814 is a 4-metre antenna extension cable engineered for Harada antenna systems, the predominant factory antenna brand fitted to many Japanese-manufactured vehicles sold in Australia including Toyota, Nissan, Mazda, Honda, Subaru, and Mitsubishi models. When installing aftermarket head units, relocating dashboards, or modifying vehicle bodywork, the factory antenna cable often becomes too short to reach the new head unit location. This extension cable provides the additional four metres of length needed to bridge the gap between antenna base and relocated head unit without requiring complete antenna replacement. The Harada-compatible connectors ensure proper fitment with factory antenna systems maintaining signal quality for AM and FM radio reception. Common scenarios requiring extension cables include: installing double-DIN head units in vehicles originally fitted with single-DIN units requiring dashboard relocation, mounting head units in custom console locations, relocating antennas during bull bar installation where original fender mounting is obstructed, or routing antenna cables around newly installed equipment like UHF radios or amplifiers occupying original cable routing space. Important Notes: Harada System Specific: This extension is designed for Harada antenna systems. Verify your vehicle uses Harada antennas before purchasing. 4 Metre Length: Provides 4m additional reach. Longer extensions introduce more signal loss than shorter alternatives. Signal Quality: Each extension introduces slight signal loss. Minimize extensions where possible for optimal AM/FM reception. Connector Compatibility: Ensure connectors match your specific Harada antenna configuration. Some models have different connector types. Not Universal: This is NOT a universal antenna extension. It's specifically for Harada systems common in Japanese vehicles. Key Features Harada Compatible - Designed for Harada antenna systems fitted to many Japanese and Australian-delivered vehicles. 4 Metre Length - Provides extended cable reach for relocated head units or modified installations requiring longer runs. AM/FM Signal - Maintains radio frequency signal transmission for standard broadcast radio reception. Factory Connector Match - Compatible connectors ensure proper fitment with existing Harada antenna systems. Dashboard Modification Solution - Enables head unit relocation during custom dashboard installations or double-DIN upgrades. Antenna Relocation - Allows antenna repositioning when factory mounting is obstructed by accessories or body modifications. Aftermarket Head Unit Installation - Bridges gap between factory antenna and relocated aftermarket stereo systems. Bull Bar Compatible - Accommodates antenna relocation when bull bars obstruct original fender mounting positions. Custom Audio Installation - Facilitates professional car audio installations requiring non-standard cable routing. Vehicle Modification Ready - Suits vehicles with body panel replacements or modifications affecting antenna cable routing. Quality Construction - Maintains signal integrity over 4-metre extension minimizing reception degradation. Toyota/Nissan/Mazda Fitment - Compatible with Harada systems commonly used in these manufacturers' vehicles. Professional Installation - Enables clean cable routing during professional automotive electrical modifications. Cost-Effective Solution - Extends existing antenna system without requiring complete antenna replacement. Standard AM/FM Bands - Covers standard broadcast AM (530-1710kHz) and FM (88-108MHz) frequency ranges. Technical Specifications Specification Details Brand AXIS Model CR814 SKU CR814 Product Type Antenna Extension Cable Description Harada Antenna Extension - 4m Length 4 Metres Compatibility Harada Antenna Systems Signal Type AM/FM Radio Warranty Standard Manufacturer Warranty Frequently Asked Questions Q: How do I know if my vehicle has a Harada antenna system? A: Check your vehicle's antenna base or consult your vehicle manual. Harada is common on Japanese-manufactured vehicles including many Toyota, Nissan, Mazda, Honda, Subaru, and Mitsubishi models. If your antenna is factory-fitted and you drive a Japanese vehicle, there's good probability it's Harada. Alternatively, check the connector at the back of your head unit - compare with product images or bring photos to us for verification. Q: Will this 4-metre extension reduce my radio reception quality? A: Yes, longer extensions introduce more signal loss than shorter ones. A 4m extension typically causes 4-8dB signal loss depending on cable quality and frequency. In strong signal areas (metropolitan locations, near transmission towers), this loss may be acceptable. In marginal reception areas (rural locations, valleys, underground car parks), you will likely experience noticeably reduced reception quality, particularly for weaker AM stations. Consider shorter extensions or antenna/head unit relocation if reception becomes unsatisfactory. Q: Can I connect multiple extensions together for even longer reach? A: Not recommended. Connecting multiple extensions compounds signal loss significantly. A 4m extension already introduces considerable signal degradation - adding another extension would likely result in poor or unusable reception, especially for AM radio. If 4m is insufficient, strongly consider: (1) relocating your head unit closer to the antenna, (2) relocating your antenna closer to the head unit, or (3) installing a new antenna with longer factory cable. Q: Will this work with my aftermarket head unit? A: Yes, if your vehicle originally had a Harada antenna system. The extension goes between factory Harada antenna and any head unit (factory or aftermarket). The extension doesn't care about head unit brand - it simply extends the antenna cable. Ensure your aftermarket head unit has appropriate antenna input connector matching your vehicle's factory setup. Q: Can I use this for amplified or powered antennas? A: If your Harada antenna is powered (receives 12V from head unit for amplification), this extension should maintain power transmission. However, voltage drop over 4m extension may significantly affect amplifier performance. Test before permanent installation to ensure powered antenna operates correctly. Most factory Harada antennas are passive and don't require power. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

UNIDEN BT850 - Accessory Bluetooth Headset Kit for UH850 Series UHF Radios Complete Bluetooth accessory kit for UH850 series UHF radios featuring wireless handsfree communication system with Bluetooth headset, wireless PTT button, and Bluetooth dongle enabling untethered radio operation ideal for driving, hiking, working, and mobile activities requiring constant radio contact, CVC (Clear Voice Capture) noise reduction technology filtering background noise for clear communication in noisy environments, up to 6 hours operating time on single charge, USB-C charging for headset with included cables and AC adapter, comfortable in-ear silicon buds with spare set included, adjustable ear hook for left or right side wear, wireless PTT with USB charging, Bluetooth dongle for UH850 series compatibility with USB charging, ideal for commercial drivers, security personnel, tour guides, construction workers, event coordinators, and outdoor enthusiasts requiring handsfree UHF radio communication. Product Overview The UNIDEN BT850 is a comprehensive Bluetooth accessory kit engineered to provide wireless handsfree communication for UH850 series UHF radios, eliminating the need for wired headsets and enabling untethered operation during driving, hiking, working, or any activity requiring freedom of movement while maintaining radio contact. The kit includes three essential components working together seamlessly: a Bluetooth headset (BT35) with in-ear silicon buds providing comfortable audio reception and voice transmission, a wireless PTT (Push-To-Talk) button allowing radio transmission activation without touching the radio itself, and a Bluetooth dongle that connects to the UH850 series radio creating the wireless link between headset, PTT, and radio. The CVC (Clear Voice Capture) noise reduction technology actively filters background noise including wind, traffic, machinery, and environmental sounds ensuring clear voice communication even in noisy work environments or outdoor conditions. The headset delivers up to 6 hours continuous operating time on a single charge sufficient for full work shifts or extended outdoor activities, with USB-C charging providing convenient modern charging standards. The comfortable in-ear silicon buds with included spare set ensure long-term wearing comfort, while the adjustable ear hook accommodates left or right ear preference and different ear sizes. This complete system transforms wired radio operation into convenient wireless communication enabling users to keep radios secured in vehicles, on belts, or in packs while maintaining full communication capability through the wireless headset and PTT button. Important Notes: UH850 Series Radio Not Included: This is an accessory kit only. Requires compatible UH850 series UHF radio (sold separately). UH850 Series Specific: Designed specifically for UH850 series radios. Not compatible with other UNIDEN UHF radio models without appropriate dongle. Bluetooth Pairing Required: Initial setup requires pairing headset, PTT, and dongle. Consult instructions for pairing procedures. Battery Charging Before Use: Charge all three components (headset, wireless PTT, Bluetooth dongle) fully before first use for optimal performance. Operating Range Limitations: Bluetooth connection range typically 10-30 metres depending on obstructions. Maintain reasonable distance between components. Key Features CVC Noise Reduction - Clear Voice Capture technology filters background noise ensuring clear communication in noisy environments. 6 Hour Battery Life - Extended operating time on single charge sufficient for full work shifts or extended outdoor activities. USB-C Charging - Modern USB-C charging standard for headset with included cable and AC adapter for convenient charging. Wireless PTT Button - Separate Push-To-Talk button enables radio transmission without touching the radio itself for handsfree operation. Bluetooth Dongle Included - Bluetooth adapter for UH850 series radio creating wireless connection between radio and headset/PTT components. In-Ear Silicon Buds - Comfortable silicon earbuds with spare set included ensuring long-term wearing comfort and hygiene replacement. Adjustable Ear Hook - Flexible ear hook adjusts for left or right ear wear accommodating user preference and different ear sizes. Complete Kit - Includes all necessary components: headset, wireless PTT, Bluetooth dongle, chargers, and cables for immediate use. Handsfree Communication - Enables driving, hiking, working, or operating equipment while maintaining radio contact without holding handset. Professional Quality - Uniden's UHF radio expertise ensures reliable components and engineering for demanding professional applications. Multiple Charging Cables - Separate USB charging cables included for headset (USB-C), wireless PTT, and Bluetooth dongle. AC Adapter Included - Wall charger included enabling charging from household power outlets without computer USB ports. UH850 Series Compatible - Designed specifically for UH850 series handheld and in-vehicle UHF radios. Comfortable Extended Wear - Silicon buds and adjustable ear hook enable all-day wearing comfort for long work shifts. Professional Applications - Ideal for commercial drivers, security, construction, events, tours, and outdoor activities requiring handsfree radio. Technical Specifications Specification Details Brand UNIDEN Model BT850 SKU BT850 Product Type Bluetooth Headset Kit for UHF Radio Compatibility UH850 Series UHF Radios Noise Reduction CVC (Clear Voice Capture) Battery Life Up to 6 Hours Operating Time Headset Charging USB-C Ear Buds In-Ear Silicon Buds with Spare Set Ear Hook Adjustable for Left or Right Side Wear Wireless PTT Yes - Separate PTT Button with USB Charging Bluetooth Dongle Yes - For UH850 Series with USB Charging Communication Type Wireless Bluetooth Applications Driving, Hiking, Working, Mobile Activities Warranty Standard Manufacturer Warranty What's Included Complete Kit Contents: 1 x BT35 Bluetooth Headset with Spare Ear Buds 1 x Wireless PTT (Push-To-Talk) Button 1 x Bluetooth Dongle for UH850 Series 1 x AC-USB Adapter (Wall Charger) 1 x USB-C Cable for BT Headset Charging 1 x USB Cable for Wireless PTT Charging 1 x USB Cable for Bluetooth Dongle Charging Frequently Asked Questions Q: Does this kit include a UHF radio, or do I need to buy one separately? A: This is an accessory kit only and does NOT include a UHF radio. You must have a compatible UH850 series UHF radio (sold separately) for this kit to function. The kit provides the Bluetooth connectivity components (headset, wireless PTT, dongle) that connect wirelessly to your existing UH850 series UHF radio enabling handsfree operation. Q: How does the wireless PTT button work? A: The wireless PTT button is a separate physical button you wear on your clothing, hold in your hand, or mount conveniently accessible. When you press the button, it wirelessly signals the Bluetooth dongle connected to your radio, which activates the radio's transmit function. You hear incoming audio through the Bluetooth headset, and when you want to transmit, press the wireless PTT button while speaking into the headset microphone. This eliminates needing to touch or access your radio. Q: What is CVC noise reduction, and how effective is it? A: CVC (Clear Voice Capture) is digital signal processing technology that actively monitors and filters background noise including wind, traffic sounds, machinery noise, and environmental interference. While your voice is transmitted clearly, ambient noise is suppressed. The effectiveness depends on noise levels - moderate background noise (traffic, light machinery) is filtered effectively, while extremely loud environments (heavy machinery, loud music) may still allow some noise through, though significantly reduced compared to headsets without CVC. Q: Will this work with other UNIDEN UHF radios besides UH850 series? A: No, the BT850 is designed specifically for UH850 series radios and includes the appropriate Bluetooth dongle for that series. Other UNIDEN UHF radio models (such as XTRAK 50) require their own specific Bluetooth accessory kits with compatible dongles. Using the wrong dongle may result in incompatibility. Verify you own a UH850 series radio before purchasing this kit. Q: How long does it take to charge, and can I use it while charging? A: Charging times vary by component - typically 1-2 hours for full charge of headset, wireless PTT, and Bluetooth dongle. While the headset may function during charging via USB-C cable, this tethers you to the charging source defeating the wireless advantage. For best results, charge all components fully before use, and recharge after work shifts or at the end of activity days to ensure full battery capacity for next use.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Heavy-duty fuse protection for high-current 12V and 24V systems—built to last in the harshest Australian conditions. Product Overview The OEX ACX6514/50 is a professional-grade SF30 Midi inline fuse holder engineered for workshops, auto electricians, and fleet operators who demand reliable overcurrent protection in high-amperage applications. Designed for 1-32V DC systems, this single-circuit fuse holder handles loads up to 250A, making it ideal for dual battery setups, inverter installations, winch circuits, and heavy-duty automotive electrical systems. Built with corrosion-resistant stainless steel studs and rated for extreme temperatures from -40°C to +120°C, it's proven to withstand the heat, dust, and vibration of Australian outback conditions. This bulk 50-piece trade pack delivers exceptional value for installers working across multiple vehicles or building custom electrical distribution systems. Key Specifications Maximum current rating: 250A continuous at 1-32V DC Type: SF30 Midi fuse holder (inline, 1-way circuit) Stud material: Stainless steel for corrosion resistance Mounting centres: 30mm stud spacing Operating temperature range: -40°C to +120°C Pack quantity: 50 units per box Compatible with ACX6513 mounting bracket (sold separately) Warranty: 12 months manufacturer's warranty Features & Benefits 250A High-Current Capacity: Handles demanding loads like inverters, winches, and high-output alternators without voltage drop or overheating—essential for modern 4WD dual battery systems and commercial vehicle fitouts. Stainless Steel Construction: Unlike cheaper brass or plated terminals, stainless studs resist corrosion in coastal environments, under-bonnet heat, and dusty outback conditions, ensuring long-term reliability across Australia's varied climates. Extreme Temperature Rated: Proven performance from -40°C to +120°C means this holder won't crack in desert heat or fail in alpine cold, making it the choice for touring rigs and remote work vehicles that face temperature extremes. 30mm Mounting Centres: Standard SF30 format with precise 30mm spacing allows secure installation using the optional ACX6513 bracket or custom mounting solutions, giving installers flexibility in tight engine bays or battery boxes. Trade-Ready Bulk Pack: 50 units per box reduce per-unit costs for workshops, auto electricians, and fleet maintenance teams who install multiple systems—ideal for standardising protection across a vehicle fleet or keeping workshop stock levels high. Technical Specs Model: ACX6514/50 Fuse type compatibility: SF30 Midi fuses Rated voltage: 1-32V DC Maximum continuous current: 250A Stud material: Stainless steel Terminal configuration: 1-way (single circuit) Mounting hole spacing: 30mm centre-to-centre Operating temperature: -40°C to +120°C ambient Number of circuits: 1 Quantity per pack: 50 pieces Product group: Auto electrical accessories, fuses and circuit protection Warranty period: 12 months Frequently Asked Questions What size Midi fuse does this holder accept?This holder is designed for SF30 Midi fuses with 30mm mounting centres, commonly available in ratings from 30A to 250A. Can I mount this holder without the bracket?Yes, the stainless studs can be bolted directly to a suitable surface, though the ACX6513 bracket provides neater installation and strain relief. Is this suitable for 24V truck systems?Absolutely—the 1-32V rating covers both 12V passenger vehicles and 24V commercial/heavy vehicle electrical systems without derating. Will this handle starter motor or alternator circuits?Yes, the 250A continuous rating suits high-current alternator feeds, though starter circuits may require higher surge-rated protection depending on engine size. What's included in the 50-pack?You receive 50 individual fuse holders (fuses and mounting brackets sold separately), ideal for bulk installs or workshop inventory. Compatible With SF30 Midi fuses (30A–250A ratings) ACX6513 mounting bracket (recommended for secure installation) Dual battery systems and battery isolators High-output alternators (150A+ systems) DC-DC battery chargers Inverter installations (1000W–3000W+) Electric winch wiring (9000lb–18000lb winches) Solar panel charging systems Anderson plug installations Heavy-duty cable lugs and terminals 4WD auxiliary electrical systems Commercial vehicle electrical upgrades Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Heavy-duty blue ring terminals for high-current automotive connections Product Overview The OEX ACX3057BL insulated ring crimp terminals handle the serious current loads demanded by modern automotive electrical systems. Designed for 4.0mm² cable—the wire size commonly used for high-draw accessories like winches, inverters, and auxiliary battery connections—these 10.5mm internal diameter terminals fit M10 studs found on battery posts, starter motor terminals, alternator connections, and heavy-duty distribution blocks. The blue vinyl insulation instantly identifies these as 4.0mm² terminals, preventing dangerous mismatches when you're working with multiple wire gauges in complex power systems. Each terminal features double crimp construction with separate crimps for the conductor and insulation, delivering both excellent electrical contact and mechanical strain relief. This matters when terminals face constant vibration from corrugations, thermal cycling under the bonnet, and the physical stress of high-amperage current flow. Tin-plated copper construction provides superior conductivity while resisting the corrosion that destroys electrical connections in Australian conditions—from coastal salt spray to inland dust and heat. Supplied in a 14-piece pack, this quantity suits specific installations where you need multiple high-current connections: dual battery setups requiring several earth and positive terminations, custom switch panel builds with multiple power feeds, or maintaining a small inventory of the most critical terminal sizes without overstocking bulk quantities. Key Specifications Terminal type: Insulated ring (eyelet style) Internal diameter: 10.5mm (suits M10 studs/bolts) Wire size range: 4.0mm² conductor Insulation colour: Blue (4.0mm² standard colour code) Insulation material: Vinyl (PVC) Terminal material: Tin-plated copper Crimp style: Double crimp (conductor + insulation) Pack quantity: 14 pieces Warranty: One year manufacturer warranty Features & Benefits 10.5mm Internal Diameter – Fits M10 studs and bolts, the size commonly used for battery terminals, starter motor connections, alternator B+ posts, and heavy-duty earth points. The full 360-degree contact around the stud provides maximum current-carrying capacity and vibration resistance—critical for high-amperage automotive connections that can't tolerate resistance or loosening. 4.0mm² Wire Capacity – Designed specifically for 4.0mm² cable, the wire size that handles 30-50+ amp continuous loads in 12V systems. This makes these terminals essential for winch installations, inverter power feeds, dual battery isolator connections, and any accessory drawing serious current where undersized wire creates voltage drop and heat issues. Double Crimp Design – Separate crimps for the wire conductor and insulation jacket ensure proper electrical contact and strain relief. The conductor crimp creates low-resistance connection for efficient current flow, while the insulation crimp prevents wire flex fatigue at the terminal entry—particularly important in underbonnet installations where vibration and heat cycling cause premature failures in single-crimp terminals. Tin-Plated Copper Construction – Copper delivers excellent conductivity with minimal voltage drop, while tin plating protects against oxidation and corrosion. In Australian conditions—from tropical humidity to outback dust and coastal salt exposure—tin plating significantly extends terminal life compared to bare copper, maintaining low-resistance connections over years of service. Blue Colour Coding – The blue vinyl insulation follows industry-standard colour coding for 4.0mm² wire terminals, providing instant visual identification during installation and future maintenance. When you're troubleshooting an electrical system months after installation or another electrician needs to work on your wiring, that colour coding prevents dangerous terminal-to-wire mismatches. 14-Piece Pack Size – Targeted quantity for specific high-current installations without excessive inventory. Ideal for dual battery systems (requiring multiple positive and earth connections), custom electrical builds, or maintaining workshop stock of critical heavy-duty terminal sizes without bulk-pack expense. Technical Specs Terminal designation: Insulated ring terminal (eyelet crimp style) Ring internal diameter: 10.5mm (M10 stud compatibility) Stud/bolt size compatibility: M10 threaded fasteners Wire conductor range: 4.0mm² cross-sectional area Insulation sleeve colour: Blue (industry standard for 4.0mm²) Insulation material: Vinyl (PVC) compound Terminal conductor material: Tin-plated copper alloy Crimp configuration: Double crimp (wire barrel + insulation barrel) Terminal barrel internal dimensions: Sized for 4.0mm² stranded wire Current capacity: Rated for high-amperage automotive applications (30-50A+ continuous depending on wire length and installation) Pack configuration: 14 terminals per pack Quality standard: Manufactured to automotive crimp terminal specifications Warranty coverage: 1 year from purchase date Compatible With / Goes Well With 4.0mm² automotive cable (various colours for different circuits) M10 studs, bolts, and threaded battery posts Heavy-duty ratcheting crimp tools with 4.0mm² dies Battery terminal distribution blocks with M10 studs Dual battery isolators and smart battery combiners High-current circuit breakers and fuse holders Wire strippers calibrated for 4.0mm² cable Heat shrink tubing for additional connection protection Dielectric grease for corrosion prevention Torque wrench for proper terminal installation (typically 8-10Nm for M10) Winch installation kits and power cable assemblies Inverter power connection hardware Note: Always verify stud/bolt diameter before purchasing. 10.5mm ID terminals require M10 fasteners—using incorrect terminal sizes creates loose connections with high resistance and potential fire risk. Frequently Asked Questions What crimping tool do I need for 4.0mm² terminals?  Use a heavy-duty ratcheting crimp tool with dies sized for insulated terminals in the 4.0mm²/blue wire range. Quality tools ensure both conductor and insulation crimps close correctly with proper compression—standard automotive crimp tools may not have sufficient leverage for 4.0mm² wire, requiring professional-grade tools. Can I use these for winch power connections? Yes, 4.0mm² wire and properly crimped ring terminals are standard for winch installations up to 12,000lb rating on short cable runs (under 3 metres from battery). For longer runs or higher-draw winches, verify wire sizing calculations account for voltage drop—you may require larger cable. Will these fit standard car battery terminals? Most standard car batteries use larger terminal posts (typically requiring 13mm+ internal diameter ring terminals), but auxiliary batteries, distribution blocks, and some European battery designs use M10 studs where these 10.5mm terminals fit perfectly. Always verify stud size before purchasing. Are these suitable for permanent underbonnet installation? Yes, tin-plated copper resists corrosion and vinyl insulation handles automotive temperature ranges. For maximum longevity in harsh environments, apply dielectric grease to connections, properly torque terminals to manufacturer specifications, and protect exposed connections with heatshrink tubing or terminal boots. Can I connect 2.5mm² or 6.0mm² wire if I don't have the correct terminals? No—always match terminal size to wire gauge. Using oversized terminals on undersized wire creates poor crimps with high resistance and potential overheating. Using undersized terminals on oversized wire is impossible to crimp properly. Correct terminal-to-wire matching is essential for safe, reliable electrical connections. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Direct connection from ring terminals to Anderson power Product Overview The Narva 81068BL adapter cable bridges the gap between traditional 8mm ring terminal connections and modern 50A Anderson plug systems. This purpose-built adapter eliminates the need for rewiring or terminal replacement, making it ideal for connecting battery banks, solar setups, portable fridges, or auxiliary power systems to Anderson-compatible equipment. Built to Narva's exacting standards, the 81068BL handles serious current loads across 12V and 24V applications, from dual battery systems in 4WDs to caravan solar arrays and workshop power distribution. The 8mm ring terminal end provides a secure mechanical connection to battery posts, busbars, or distribution blocks, while the 50A Anderson plug delivers the reliable, weather-resistant connection that's become the Australian standard for portable power. Whether you're retrofitting older equipment to work with Anderson systems or building a custom power setup that needs to bridge both connection types, this adapter handles the job without compromising on current capacity or connection integrity. Key Specifications 50A current rating at 12V DC applications 25A current rating at 24V DC applications 8mm ring terminal on input side 50A Anderson plug on output side Manufactured to Narva quality standards 0.105kg unit weight One year manufacturer warranty Features & Benefits High Current Capacity – With 50A at 12V, this adapter handles demanding loads like portable fridges, inverters, and DC-DC chargers without voltage drop issues. The 25A rating at 24V makes it equally capable in truck and heavy equipment applications where higher system voltages are standard. Anderson Plug Compatibility – Connects directly to the 50A Anderson connector system that's become ubiquitous in Australian touring, meaning your existing Anderson-equipped gear works seamlessly with ring terminal connections on batteries, solar controllers, or distribution blocks. Eliminates Rewiring – Instead of cutting cables and fitting new terminals, this adapter preserves your existing ring terminal setup while adding Anderson connectivity. Particularly useful when you've got quality crimped ring terminals you don't want to replace or when working with sealed battery systems where you can't change the terminal type. Dual Voltage Rated – The 12V/24V rating means this adapter works across passenger vehicles, 4WDs, caravans (12V) and trucks, buses, or heavy equipment (24V), making it a versatile solution for workshops and fleets running mixed voltage systems. Secure Ring Terminal Connection – The 8mm ring terminal provides a solid mechanical connection with full 360-degree contact around the stud. Unlike quick-connect terminals that can vibrate loose on corrugations, a properly torqued ring terminal stays put under the harshest Australian off-road conditions. Narva Build Quality – Manufactured to Narva's automotive-grade standards with proper conductor sizing, quality crimps, and Anderson housings that maintain contact pressure even after hundreds of plug cycles. Technical Specs Input connection: 8mm ring terminal (M8 stud size) Output connection: 50A Anderson plug (SB50 style) Maximum current: 50A at 12V DC / 25A at 24V DC Conductor material: Copper Insulation: Automotive-grade Cable length: Standard adapter length (short-form cable) Weight: 0.105kg (105g) Warranty period: 1 year from date of purchase Compatible With / Goes Well With 50A Anderson plug accessories and extensions Dual battery systems with ring terminal connections Portable fridge/freezer units with Anderson input Solar charge controllers with Anderson outputs Battery boxes and trays with ring terminal posts DC-DC battery chargers (Anderson-equipped models) Inverters with Anderson power inputs Workshop battery distribution systems 12V and 24V auxiliary power setups Anderson plug dust covers and cable management accessories Note: Always verify current requirements of your connected equipment stay within adapter ratings. Ring terminal connection requires appropriate M8 stud/post on battery or busbar. Frequently Asked Questions Can I use this adapter for solar panel connections? Yes, this adapter works well for connecting ring terminal battery posts to Anderson-equipped solar controllers, panels, or portable solar blankets, provided your current draw stays within the 50A (12V) or 25A (24V) rating. Will this fit standard car battery terminals? The 8mm ring terminal fits M8 studs commonly found on battery distribution posts, busbars, and some auxiliary battery terminals, but most standard car batteries use larger posts requiring different terminal sizes verify your application before purchasing. Does this maintain the 50A rating along the entire cable? Yes, the entire assembly from ring terminal through to Anderson plug is rated for the full 50A at 12V (25A at 24V), provided both ends are properly connected and torqued to manufacturer specifications. Can I leave this permanently connected outdoors? While the Anderson plug end offers weather resistance, the ring terminal connection should be protected from direct weather exposure and maintained with proper terminal protection spray or dielectric grease for long-term outdoor installations. Is the Anderson plug end removable for other connections? No, this is a fixed adapter cable—the Anderson plug is permanently attached to the ring terminal via the cable assembly, not designed for disassembly or reconfiguration. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Keep your wiring installations clean and secure with Narva 56581 P Clips — the workshop staple for professional cable management in automotive, marine, and 4WD applications. Product Overview The Narva 56581 is a 4.3mm internal diameter P-clip designed for securing cables, wiring looms, hoses, and light tubing to body panels, chassis rails, and mounting surfaces. Manufactured from durable black plastic, these clips provide vibration-resistant cable retention without the sharp edges or corrosion issues of metal alternatives. The 4.3mm ID suits common automotive cable gauges including light-duty speaker wire, LED wiring, sensor cables, and brake lines. Supplied in a 100-piece pack, they're ideal for workshop stock, mobile installers, auto electricians, and DIY enthusiasts tackling headunit installs, lighting upgrades, or dual-battery setups. Backed by Narva's one-year warranty and proven across decades of Australian automotive use. Key Specifications Internal diameter: 4.3mm (suits cables/hoses up to approximately 4mm external diameter) Clip style: P-clip (single screw/rivet mount) Material: Black plastic (nylon-type polymer) Pack quantity: 100 pieces Colour: Black Weight: 0.065kg (65 grams per 100-pack) Warranty: One year manufacturer coverage Mounting: Single hole for screw, rivet, or self-tapping fastener Features & Benefits 4.3mm Precision Fit — Internal diameter is optimised for common automotive wiring including 16-18 gauge speaker cable, LED strip power leads, sensor wiring, and vacuum lines, providing secure retention without crushing delicate conductors. 100-Piece Workshop Pack — Bulk quantity keeps professional installers stocked for multiple jobs, eliminating mid-install parts runs and ensuring consistent cable management across fleet vehicles or repeat customer work. Non-Corrosive Plastic Construction — Black nylon-type material resists salt spray, fuel vapours, and battery acid better than metal clips, making it ideal for engine bays, underbody installations, and marine environments where rust destroys steel alternatives. Vibration-Resistant Retention — P-clip design clamps cables firmly against mounting surfaces, preventing chafing and movement fatigue even on corrugated dirt roads, rough seas, or high-vibration diesel engines. Universal Mounting Compatibility — Single mounting hole accepts self-tapping screws, pop rivets, or machine screws, allowing quick installation on sheet metal, plastic panels, fibreglass, and wooden substrates common in custom builds. Technical Specs Inside diameter: 4.3mm Clip type: P-clip (single-mount) Material: Plastic (nylon polymer) Colour: Black Pack quantity: 100 pieces Weight: 0.065kg (65g) Mounting hole: Single fixing point (screw/rivet diameter varies by fastener choice) Warranty: One year Application: Automotive, marine, and general cable/hose management Compatible With / Goes Well With 16-18 gauge automotive cable and speaker wire LED strip power leads and accent lighting wiring Sensor cables and data wiring looms Small vacuum lines and boost hoses Brake lines and fluid hoses (light-duty) Headunit installations and car audio wiring Auxiliary lighting circuits and light bar wiring 4WD dual-battery system wiring Caravan and trailer cable management Pairs well with: Automotive cable (various gauges), self-tapping screws, pop rivets, cable ties, heat shrink, split tubing, grommets Weight 0.065kg (65 grams per 100-pack) Frequently Asked Questions What size cables will these clips hold?  They're designed for cables and hoses with external diameters up to approximately 4mm, including typical 16-18 gauge automotive wire, LED strip leads, and small vacuum/fuel lines. Can I use these under the bonnet? Yes — the plastic material resists heat better than rubber and won't corrode like metal clips. Keep them away from direct exhaust manifold contact or extreme heat zones above 100°C. How do I install P-clips? Drill a pilot hole in your mounting surface, position the cable in the clip, align the clip's mounting hole, and secure with a self-tapping screw, pop rivet, or machine screw depending on substrate. Will these hold up on corrugated roads? Absolutely — the P-clip design clamps cables firmly to prevent movement. They're standard in 4WD auxiliary wiring and caravan installations where vibration is constant. Why plastic instead of metal clips? Plastic won't corrode in marine or underbody environments, doesn't conduct electricity (preventing accidental shorts), and won't damage cable insulation through sharp edges like some metal clips can. Frequently Asked Questions Is this legal for roadworthy certification in Australia? Yes — it meets ADR requirements for side marker lights on trailers and commercial vehicles. CTAITBA final certification is pending, but the unit is designed to Australian compliance standards. Can I use this on both my caravan (12V) and truck trailer (24V)? Absolutely — the 12-24V range means one part number works across your entire fleet or mixed vehicle setup without needing separate inventory or voltage-specific versions. How do I mount this marker light? It's designed for surface mounting with minimal profile. Drill mounting holes per the template (usually supplied), feed wires through, secure with screws, and connect to your marker light circuit. Will the clear lens fade or yellow in the sun? No — polycarbonate lenses resist UV degradation far better than older amber/red plastic lenses. The colour comes from the LEDs themselves, not the lens material, maintaining brightness long-term. What's the difference between this and cheaper marker lights? The 5-year warranty, stainless steel construction, ADR compliance, and LED Autolamps' proven quality. Cheap markers fail within 12-24 months from moisture ingress or LED failure, costing more in repeated replacements. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Ultra-Slim Amber LED Marker Light Clear Lens, Black Stainless Steel Bezel, 12/24V ADR Approved. Product Overview The LED Autolamps 86BARM is an ultra-slim amber LED clearance and marker light featuring a clear polycarbonate lens with internal coloured LEDs and a black stainless steel bezel. Measuring just 14mm wide x 12mm high x 2.5mm deep, the 86BARM is one of the slimmest marker lights in the LED Autolamps range ideal for flush mounting on trailer frames, caravan bodies, truck panels, and commercial vehicle bodywork where a low-profile, unobtrusive marker solution is required. The black stainless steel bezel provides corrosion resistance suited to coastal, outback, and demanding outdoor environments, while the clear lens with internal amber LEDs maintains colour accuracy without the UV-related fading common in traditional coloured plastic lenses. Compatible with both 12V and 24V systems, the 86BARM is ADR approved and backed by a 5-year warranty. Supplied as a single unit in blister packaging. Key Specifications Function: Clearance / marker light LED colour: Amber Lens: Clear with internal amber LEDs Bezel material: Black stainless steel Housing colour: Black Dimensions: 14mm (W) x 12mm (H) x 2.5mm (D) Input voltage: 12–24V DC Compliance: ADR approved CTATBA Warranty: 5 years Weight: 0.05kg Packaging: Blister pack single unit Brand: LED Autolamps SKU: 86BARM Features & Benefits Ultra-slim 2.5mm depth: Extremely low profile at just 2.5mm deep, allowing near-flush mounting on trailer frames, caravan sides, and body panels where clearance is tight Clear lens with internal amber LEDs: Modern design delivers consistent amber light output through a clear polycarbonate lens, eliminating the UV fading and discolouration associated with traditional coloured plastic lenses Black stainless steel bezel: Corrosion-resistant stainless steel construction with a black finish withstands coastal salt spray, outback dust, and road grime, outlasting standard chrome plastic alternatives 12V and 24V compatible: Operates across both 12V passenger, caravan, and trailer applications and 24V commercial truck and bus systems from a single part number ADR approved: Compliant with Australian Design Rules for use as a clearance and marker light on road vehicles, trailers, and commercial vehicles 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty for long-term installation confidence Technical Specs Specification Detail SKU 86BARM Brand LED Autolamps Type Clearance Light / Marker Light LED Colour Amber Lens Clear (internal coloured LEDs) Bezel Material Black Stainless Steel Housing Colour Black Dimensions 14mm (W) x 12mm (H) x 2.5mm (D) Input Voltage 12–24V DC ADR Compliance CTATBA Warranty 5 Years Weight 0.05kg Packaging Blister Pack single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring ADR-compliant amber marker or clearance lighting including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Horse floats and livestock trailers Pairs well with: LED Autolamps combination lamps and trailer lighting range LED Autolamps MAXILAMPC3XR stop/tail/indicator combination lamp LED Autolamps 35CARM red/amber side marker LED Autolamps 7030R red self-adhesive reflectors Frequently Asked Questions What colour does this marker light emit? The 86BARM emits amber light through a clear polycarbonate lens using internal coloured LEDs. Despite the product title referencing "amber/red," the confirmed LED colour from the supplier data is amber only. Is this lamp ADR approved for Australian road use? Yes the 86BARM is ADR approved. The ADR compliance code in the NAPA supplier system is listed as CTATBA. If you require the full final certification number for compliance documentation, confirm this with LED Autolamps directly before purchasing. What voltage systems is this lamp compatible with? The 86BARM operates on both 12V and 24V DC systems, making it suitable for passenger vehicles, caravans, trailers, and 24V commercial trucks from a single part number. Why does the lens look clear if the light is amber? The clear lens design uses internal amber LEDs to produce the coloured output, rather than relying on a tinted lens. This approach maintains colour accuracy and brightness over time without UV fading or lens discolouration that occurs with traditional coloured plastic lenses. What is the bezel made of and why does it matter? The bezel is black stainless steel, providing genuine corrosion resistance against salt spray, moisture, and road chemicals making it more durable than standard chrome plastic bezels in coastal and outback Australian conditions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Control your 12V accessories with confidence using the OEX ACX1971BL — a 30-amp illuminated rocker switch built for reliable switching in demanding automotive and marine environments. Product Overview The OEX ACX1971BL is a single-pole single-throw (SPST) rocker switch designed for 12V DC applications requiring clear visual status indication. With a 30-amp power rating and red LED illumination, this switch handles high-current accessories like driving lights, light bars, spotlights, pumps, and fans. The 12mm mounting hole suits standard switch panel cutouts, making it ideal for custom dash installations, auxiliary switch panels in 4WDs, or marine helm stations. Three-terminal design simplifies wiring, while the illuminated rocker provides at-a-glance status verification day or night. Backed by OEX's one-year warranty and built to withstand Australian heat, dust, and vibration. Key Specifications Current rating: 30A at 12V DC Switch configuration: SPST (Single Pole Single Throw) — simple on/off operation Illumination: Red LED backlight for clear status indication Mounting hole diameter: 12mm Terminal count: 3 terminals (power in, load out, LED positive) Switch positions: 2 (On/Off) Voltage: 12V DC automotive/marine systems Warranty: One year manufacturer coverage Switch action: Momentary rocker with positive click feedback Features & Benefits 30-Amp Capacity — Handles high-draw accessories like LED light bars, spotlights, auxiliary fans, and pumps without overheating or voltage drop, eliminating the need for external relays in most applications. Red LED Illumination — Backlit rocker provides instant visual confirmation of switch state, preventing accidental accessory activation and making night-time operation foolproof in dark cabins or on moonless outback tracks. 12mm Standard Mounting — Fits common switch panel cutouts used across aftermarket automotive panels, marine helm stations, and custom fabrications, allowing quick integration into existing setups. SPST Simplicity — Single-pole design keeps wiring straightforward with just three terminals, reducing installation time and troubleshooting complexity compared to multi-pole alternatives. Rugged Rocker Action — Positive-feedback switching mechanism survives thousands of cycles in high-vibration environments like corrugated dirt roads, boat hulls, and work vehicles. Technical Specs Power rating: 30A Voltage: 12V DC Switch type: Rocker (SPST) Number of poles: 1 Number of positions: 2 (On/Off) Terminal count: 3 Mounting hole: 12mm diameter Illumination: Red LED lamp Warranty period: One year Environmental suitability: Automotive/marine 12V systems Compatible With / Goes Well With 12V LED light bars and driving lights up to 30A draw Auxiliary spotlights and work lights Electric fans and water pumps Air compressors and tyre inflators Custom switch panels and dash installations 4WD auxiliary circuits and touring setups Marine accessory circuits and bilge pumps Pairs well with: Anderson plugs, automotive cable, relays (for loads over 25A), switch panels, circuit breakers, blade fuses Frequently Asked Questions What accessories can I run with a 30A switch? Most LED light bars, spotlights, driving lights, auxiliary fans, water pumps, and air compressors. For loads over 25A continuous or inductive loads like winches, use this switch to trigger a relay instead. Does the red light stay on when the switch is off?  No — the LED illuminates only when the switch is in the ON position, providing clear status indication without draining your battery when accessories are off. Will this fit my existing switch panel? If your panel has a 12mm hole, yes. Measure your existing cutout or check your panel specs. This is the standard size for most aftermarket automotive and marine rocker switches. Can I use this in a marine environment? Yes — the switch is suitable for 12V marine applications, but ensure the installation location is protected from direct water spray. Consider using dielectric grease on terminals in high-moisture areas. Do I need a relay for my 20A light bar? Not necessarily — the 30A rating handles a 20A load comfortably. However, if your light bar is mounted far from the switch or you want to reduce voltage drop, running a relay near the load is still good practice. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Workshop staple in bulk—100 x 20A blade fuses for the bench, toolbox, or service bay. Product Overview The OEX ACX1605 delivers 100 x 20-amp standard blade fuses in one workshop-ready pack, eliminating the frustration of running out mid-job or making emergency trips to suppliers. These yellow-coded 20A fuses fit the standard ATO/ATC blade fuse slots found across virtually every Australian vehicle from the 1980s onwards, plus caravans, boats, and 12V accessories. At 19mm x 19mm dimensions, they're the universal automotive fuse standard that protects circuits in everything from basic lighting and accessories through to moderate-draw equipment like auxiliary pumps, fans, and 12V outlets. OEX backs these fuses with a 1-year warranty, and bulk pack pricing makes this the smart buy for workshops, auto electricians, fleet maintenance, or serious DIYers who value having the right fuse on hand when a circuit blows. Key Specifications Amperage rating: 20A (amps) Fuse type: Standard blade (ATO/ATC) Colour code: Yellow (industry standard for 20A) Dimensions: 19mm x 19mm (standard blade size) Pack quantity: 100 fuses Voltage rating: 32V DC (standard automotive) Warranty: 1 year manufacturer warranty Weight: 0.178 kg per 100-pack Material: Zinc alloy blade terminals, thermoplastic housing Compliance: Meets automotive blade fuse standards Features & Benefits 100-Pack Eliminates "Out of Stock" PanicKeep 100 x 20A fuses on the shelf and you'll never halt a job searching through mixed fuse assortments or discovering you're fresh out when a customer's auxiliary circuit blows. Perfect for workshops doing regular auto electrical work, service bays replacing blown fuses during routine maintenance, or fleet operators maintaining multiple vehicles. 20-Amp Rating for Common Auxiliary CircuitsThe 20A rating suits a huge range of automotive applications: 12V accessory sockets (cigarette lighter outlets), auxiliary lighting circuits, electric fuel pumps, cooling fans, car audio head units, reversing cameras, and aftermarket accessories drawing 10-18 amps continuous. It's the Goldilocks rating between light-duty 10A/15A circuits and heavy-duty 25A/30A loads. Yellow Industry Colour CodingYellow housing instantly identifies these as 20A fuses, matching the universal automotive colour standard used across virtually every vehicle manufacturer. No squinting at tiny amp markings—grab yellow, you've got 20 amps. Critical when you're fault-finding under a dash or working in poor light. Standard Blade Fitment Across Decades of VehiclesThese 19mm x 19mm standard blade fuses (ATO/ATC type) fit the fuse boxes in Australian-delivered vehicles from the mid-1980s through to current models, plus the majority of caravans, camper trailers, boats, and 12V accessory installations. One fuse type covers an enormous application range. OEX Quality at Bulk Pack PricingOEX is a trusted Australian brand in auto electrical components, and buying 100-packs delivers better value per fuse than retail blister packs while ensuring consistent quality across the batch. These aren't marketplace specials of unknown origin—they're backed by OEX's 1-year warranty. Workshop-Friendly PackagingThe bulk pack format suits workshop parts bins, service van storage, or toolbox organisation. Decant into labelled containers for quick access, or keep the pack intact for inventory control in commercial environments. Also Available in 5-Packs for RetailIf you're a DIY customer needing a handful rather than a hundred, OEX offers the same fuse in 5-packs (ACX1605BL) for glovebox spares or single-vehicle use. Technical Specs Amperage: 20A Voltage Rating: 32V DC (typical automotive application) Fuse Type: Blade fuse (standard/ATO/ATC) Blade Configuration: Standard 19mm x 19mm Housing Colour: Yellow (ISO 8820 colour coding for 20A) Terminal Material: Zinc alloy with tin plating Housing Material: Thermoplastic (flame-retardant) Operating Temperature: -40°C to +85°C (typical automotive range) Breaking Capacity: Fast-blow characteristics for circuit protection Dimensions: 19mm width x 19mm height x 5mm thickness (standard blade profile) Pack Quantity: 100 fuses Total Pack Weight: 0.178 kg (approximately 1.78g per fuse) Warranty Period: 1 year from purchase date Also Available: ACX1605BL (5-pack retail version) Compatible With / Goes Well With OEX Standard Blade Fuses - Other AmperagesComplete your fuse inventory with OEX standard blade fuses in 5A, 10A, 15A, 25A, and 30A ratings to cover the full range of automotive circuit protection requirements. OEX Blade Fuse Holders and PanelsOEX inline blade fuse holders, fuse blocks, and distribution panels for adding fused circuits in auxiliary wiring, 12V accessory installations, and custom electrical systems. OEX Mini Blade FusesOEX mini blade fuse range for newer vehicles using compact mini-blade fuse boxes (typically 2000s onwards, especially European and Asian manufacturers). Automotive Circuit TestersMultimeters, test lights, and circuit testers for diagnosing blown fuses and identifying circuit faults before replacement. Blade Fuse PullersPlastic fuse pullers prevent damage to fuse terminals and surrounding fuse box sockets when extracting tight-fitting blade fuses. Workshop Storage SolutionsParts bin organisers, wall-mounted storage racks, and labelled containers for maintaining organised fuse inventory by amperage and type. Vehicle ApplicationsSuitable for Australian-delivered vehicles from mid-1980s onwards, caravans, camper trailers, boats, agricultural equipment, 4WD auxiliary systems, and aftermarket 12V installations requiring standard blade fuse circuit protection. Weight 0.178 kg per 100-pack (approximately 1.78g per individual fuse). Frequently Asked Questions What's the difference between standard and mini blade fuses?Standard blade fuses (19mm x 19mm, like these) are the original automotive blade fuse used since the 1980s. Mini blade fuses are smaller (10.9mm x 16mm) and found in newer vehicles with compact fuse boxes—these standard fuses won't fit mini fuse slots. Can I use a 20A fuse in a circuit that originally had 15A?No—always replace fuses with the same amperage rating specified by the vehicle or equipment manufacturer. Using higher-rated fuses removes overcurrent protection and risks circuit damage or fire if a fault occurs. What automotive circuits typically use 20A fuses?Common 20A applications include 12V accessory sockets, auxiliary lighting circuits, electric fuel pumps, radiator cooling fans, car stereo head units, reversing cameras, trailer brake controllers, and aftermarket accessories drawing 10-18 amps continuous load. Are these fuses suitable for marine or caravan use?Yes, standard blade fuses are widely used in caravans, camper trailers, and boats for 12V DC circuits. The 20A rating suits water pumps, interior lighting circuits, 12V outlets, and moderate-draw accessories in recreational vehicle applications. What's the shelf life of unused blade fuses?Blade fuses have no practical shelf life when stored in dry conditions away from corrosive environments. The zinc alloy terminals may develop surface oxidation over many years, but this won't affect performance in typical workshop storage. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Serious UHF communication for the toughest Australian conditions—built to survive dust, water, and whatever you throw at it. Product Overview The GME TX6165XY represents the current benchmark in handheld UHF CB communication for Australian users who demand reliability in harsh environments. This 5-watt handheld radio combines military-grade durability with practical features designed for real-world use across worksites, touring rigs, and remote properties. The TX6165 delivers clear communication through its 2-watt speaker and high-contrast LCD display, while IP67 ingress protection and MIL-STD810G rating ensure it survives dust storms, rain, drops, and the daily punishment of professional use. With switchable 5/1 watt transmission power and up to 30 hours battery life from the included 2600mAh Li-Ion pack, this radio keeps you connected when it matters most. The user-programmable button, VOX hands-free mode, and built-in LED torch add versatility for both commercial operators and recreational users who need dependable UHF CB communication in Australia's demanding conditions. Key Specifications 5/1 watt switchable UHF CB transmission power (476-477 MHz, 80 channels) 2-watt speaker output for clear audio in noisy environments IP67 ingress protection rating (dust-tight and waterproof to 1m for 30 minutes) MIL-STD810G military durability standard compliance 2600mAh Li-Ion battery pack with up to 30 hours battery life (typical use) High-contrast LCD display readable in direct sunlight Built-in LED torch with independent operation VOX hands-free mode for operation without PTT button Dual Watch and Triple Watch scanning functions Priority channel monitoring User-programmable function button Rotary power/volume control knob Includes desktop charger (BCD020), AC adaptor (PS002), antenna (AE4021), and belt clip (MB060) Features & Benefits Military-Grade Toughness for Real Australian ConditionsThe IP67 rating means complete dust protection and waterproof performance to 1 metre—critical when you're caught in a dust storm on a remote track or working through a downpour on site. The MIL-STD810G certification proves this radio survives drops, vibration, extreme temperatures, and the punishment of daily professional use. This isn't a radio that stays in the glovebox; it's built to cop a beating and keep working. 5-Watt Power When You Need RangeSwitchable 5/1 watt transmission gives you maximum legal UHF CB power for extended range in open terrain, or drop to 1 watt to conserve battery during short-range communication around camp or on the jobsite. That 5-watt output delivers genuine reach across paddocks, between convoy vehicles on corrugated tracks, or from the bottom of a gully back to base. 30-Hour Battery Life Gets You Through the WeekThe 2600mAh Li-Ion battery pack delivers up to 30 hours of typical use—enough for extended touring trips, multi-day work rotations, or a full week of site communication without scrambling for a charger. The included desktop charger and AC adaptor make overnight charging simple, and the Li-Ion chemistry means no memory effect when you top up between shifts. 2-Watt Speaker You Can Actually HearThat 2-watt speaker output cuts through engine noise, wind, and worksite clatter. You'll hear incoming calls clearly in a moving 4WD, on a noisy construction site, or with machinery running nearby—critical for safety communication when every call matters. Large LCD Display You Can Read in the SunThe high-contrast LCD remains clearly visible in direct Australian sunlight, eliminating the squinting and shading you get with cheaper radios. Check your channel, monitor signal strength, and view battery status at a glance, even at midday in the outback. VOX Hands-Free Mode for True MobilityVOX (voice-activated transmission) lets you communicate without pressing the PTT button—essential when you're steering a vehicle, operating equipment, or carrying gear with both hands. Sensitivity adjustment ensures reliable triggering without false activation from background noise. Built-In LED Torch for After-Dark WorkThe integrated LED torch operates independently from radio functions, providing illumination for after-dark vehicle checks, setting up camp, or navigating to the ute at knock-off time. It's one less piece of gear to carry and one less battery to maintain. Dual/Triple Watch Keeps You Across Multiple ChannelsDual Watch and Triple Watch scanning monitors your selected channels simultaneously, so you don't miss calls on secondary channels while monitoring your primary. Perfect for operators who need to track multiple work crews, convoy groups, or property zones without constant manual switching. User-Programmable Button for Your WorkflowAssign frequently used functions to the programmable button—whether that's scan, monitor, torch, or channel selection—tailoring the radio's operation to your specific communication workflow rather than forcing you into a one-size-fits-all button layout. Complete Kit Ready to UseEverything's in the box: radio, 2600mAh battery pack, desktop charger, AC adaptor, stubby antenna, and belt clip. No hunting for compatible accessories or discovering you need extra purchases to get on air—charge it up and you're transmitting. Technical Specs Frequency Range: 476.425 MHz – 477.4125 MHz (UHF CB, 80 channels) Output Power: 5 watt / 1 watt (switchable) Speaker Output: 2 watts Battery: 2600mAh Li-Ion (BP026) Battery Life: Up to 30 hours (typical use, 5/5/90 duty cycle) Ingress Protection: IP67 (dust-tight, waterproof to 1m for 30 minutes) Durability Standard: MIL-STD810G Operating Temperature: -30°C to +60°C Dimensions: Not specified Weight: Not specified Included Accessories: BP026 battery pack, BCD020 desktop charger, PS002 AC adaptor, AE4021 antenna, MB060 belt clip Functions: VOX, Dual Watch, Triple Watch, Priority Channel, Scan, LED torch Display: Large high-contrast LCD Controls: Rotary power/volume knob, user-programmable button Colour: Yellow high-visibility housing Compatible With / Goes Well With Vehicle UHF CB SystemsPairs with GME vehicle-mounted UHF CB radios (TX3520, TX4500, XRS series) for dual handheld/vehicle communication setups in work fleets or touring convoys. External AntennasCompatible with GME AE4018 whip antenna (extended range), AE4704 flexible antenna (snag-resistant), or GME speaker microphones for enhanced audio and convenience. Additional Battery PacksGME BP026 spare 2600mAh Li-Ion battery packs allow instant battery swaps for extended operations without waiting for charging. Desktop Chargers and Multi-Bay ChargingGME multi-bay desktop chargers are available for fleet applications requiring simultaneous charging of multiple radios and spare battery packs. Heavy-Duty Carry CasesGME and third-party protective cases provide additional impact protection and secure storage for radio, spare batteries, and accessories during transport. 4WD Communication SystemsIntegrates into 4WD touring setups alongside GME vehicle radios, intercoms, and emergency beacons for comprehensive remote area communication. Worksites and Commercial FleetsSuitable for construction sites, mining operations, agricultural properties, security patrols, and any commercial application requiring reliable UHF CB communication under ACMA regulations. Frequently Asked Questions Is this radio legal to use without a license in Australia?Yes, the TX6165XY operates on the UHF CB band (476-477 MHz, 80 channels) which is license-free for use in Australia under ACMA regulations. How long does the battery actually last in real-world use?GME rates battery life at up to 30 hours based on typical use (5% transmit, 5% receive, 90% standby). Heavy transmission use or constant scanning will reduce runtime; light monitoring use may extend it beyond 30 hours. Can I use this radio while it's charging?Yes, the TX6165 supports operation while connected to the desktop charger, useful for base station use or extended monitoring applications without battery drain. What's the actual range I can expect?Range depends heavily on terrain. Expect 1-3 km in dense bush or urban areas, 5-10 km in open farmland or coastal areas, and up to 15-25 km line-of-sight between hilltops with external antennas. Does the IP67 rating cover submersion or just rain?IP67 provides complete protection against dust and allows temporary immersion to 1 metre depth for up to 30 minutes. It handles rain, hose-downs, and accidental drops in water, but isn't designed for prolonged underwater use. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less