Drivetech 4x4 DT-02022 30 Amp DC to DC Battery Charger with Solar Input - Bluetooth LCD Screen, MPPT Solar Controller, Multi-Stage Lithium and AGM Battery Charging for 4WD, Caravan, and Camping Applications Charge your auxiliary battery system efficiently with Drivetech 4x4 DT-02022 30A DC-DC Battery Charger—featuring 30A DC-DC charging from vehicle alternator combined with 450W MPPT solar input maximizing charge rate from dual sources, Bluetooth-enabled remote LCD screen providing real-time monitoring of voltage, current, charging status, and system diagnostics, compatible with all battery chemistries including lithium (LiFePO4), AGM, gel, and flooded lead-acid with intelligent multi-stage charging profiles, IP67 waterproof and dustproof rating enabling under-bonnet installation in harsh environments, extreme temperature operation from 0-90°C suitable for hot engine bay mounting and outback conditions, innovative MST (Modular Sense Technology) allowing multiple units to synchronize for higher amperage output as battery bank expands, 12V or 24V input from vehicle electrical system with regulated 12V output, 50V maximum solar input voltage with MPPT (Maximum Power Point Tracking) regulation extracting maximum power from solar panels, comprehensive protection systems including overcharging protection, short circuit protection, temperature monitoring with automatic power reduction, and reverse polarity protection, internal charger temperature monitoring preventing thermal damage during extended operation, remote mount Bluetooth LCD screen (75x75x20mm) separating display from charger unit enabling convenient dashboard mounting, compact charger unit (190x125x40mm) fitting tight under-bonnet spaces, professional-grade construction for commercial mining and extreme 4WD applications, easy installation with clear terminal marking and included mounting hardware, suitable for dual battery systems, caravan auxiliary batteries, camper trailer power systems, 4WD touring setups, and off-grid solar charging applications, Drivetech 4x4 12-month or 20,000km warranty covering manufacturing defects, Australian designed for local conditions and vehicle configurations, and providing reliable auxiliary battery charging solution for extended off-grid adventures and remote touring. Product Overview Drivetech 4x4 DT-02022 30A DC-DC Battery Charger combines vehicle alternator charging with solar input delivering maximum charge efficiency for auxiliary battery systems. 30A DC-DC charging harnesses vehicle alternator output providing rapid auxiliary battery charging while driving. 450W MPPT solar input supplements alternator charging enabling battery charging when stationary—combined dual-source charging maximizing charge rate reducing charging time significantly compared to single-source systems. Intelligent multi-stage charging profiles optimize battery health and longevity. Automatic battery chemistry detection or manual selection ensures correct charging algorithm for lithium (LiFePO4), AGM, gel, and flooded lead-acid batteries. Multi-stage charging progresses through bulk, absorption, and float stages maximizing charge acceptance while preventing overcharging damage. Lithium battery profile includes temperature compensation and cell balancing support extending lithium battery lifespan. Bluetooth-enabled remote LCD screen provides comprehensive system monitoring without opening under-bonnet compartment. Real-time display shows input voltage, output voltage, charging current, battery state of charge, solar input power, and fault codes. Bluetooth connectivity enables smartphone monitoring through companion app (where available). Remote screen mounting on dashboard or accessible location simplifying system monitoring while driving or at camp. Dual-Source Charging Advantage: Alternator charging provides rapid battery replenishment while driving—30A charge rate recovers auxiliary battery capacity quickly during transit between camps. Solar charging maintains battery when stationary—450W solar capability (approximately 3x 150W panels) providing substantial daytime charging at campsite. Combined system eliminates auxiliary battery depletion during extended camping enabling true off-grid capability. No need to run engine for battery charging—solar maintains battery between driving days. MPPT Solar Technology: MPPT (Maximum Power Point Tracking) solar regulation extracts 15-30% more power from solar panels compared to PWM controllers. MPPT algorithm continuously tracks solar panel maximum power point adjusting voltage and current for optimal power transfer. Particularly effective in variable light conditions (partial shade, morning/evening, cloud cover) maintaining efficient charging when PWM controllers lose effectiveness. 50V maximum input voltage compatible with 12V solar panels in series configuration maximizing solar array design flexibility. MST Modular Design: Innovative Modular Sense Technology enables multiple DT-02022 units to synchronize sharing charging load. Link two units for 60A combined output, three units for 90A, enabling system expansion as battery bank capacity grows. Synchronized units communicate via CAN bus sharing load equally preventing single-unit overload. Start with single 30A unit, add additional units as needs expand—modular approach reducing initial investment while providing future expandability. Critical for large lithium battery banks requiring high charge current for optimal charging. Extreme Environment Operation: IP67 waterproof and dustproof rating withstanding water immersion, dust ingress, and pressure washing. 0-90°C operating temperature range enabling under-bonnet mounting in Australian summer conditions and extreme outback heat. Internal temperature monitoring prevents thermal damage—charger automatically reduces output power during extreme temperature conditions protecting internal components while maintaining partial charging capability. Robust construction designed for commercial mining vehicle applications surviving constant vibration, shock, and harsh operating conditions. Comprehensive Protection Systems: Multiple protection layers ensuring safe reliable operation. Overcharging protection prevents battery damage from excessive voltage. Short circuit protection immediately shuts down output during fault conditions. Temperature protection monitors charger and battery temperature preventing thermal runaway. Reverse polarity protection prevents damage from incorrect wiring connections during installation. Fault codes displayed on LCD screen simplifying troubleshooting and diagnosis. Professional Installation Quality: Clear terminal labeling simplifying installation. Comprehensive installation manual with wiring diagrams for common vehicle configurations. Includes mounting hardware for secure installation. Professional automotive electricians complete installation in 2-3 hours. Competent DIY installers achieve professional results with basic electrical knowledge and tools. Compatible with standard automotive cables, fuses, and circuit breakers. Drivetech 4x4 Quality and Support: Drivetech 4x4 specializes in 4WD electrical, engine, and body components for extreme Australian conditions. Products proven in commercial mining, outback touring, and professional 4WD applications. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with installation and troubleshooting. Replacement parts availability ensuring long-term product support. Technical Specifications SKU DT-02022 Product Type DC to DC Battery Charger with Solar Input Brand Drivetech 4x4 DC-DC Charging Output 30A maximum (12V output) Input Voltage Range 12V or 24V vehicle systems Output Voltage 12V (regulated) Solar Input 50V maximum, 450W maximum Solar Regulation MPPT (Maximum Power Point Tracking) Battery Compatibility Lithium (LiFePO4), AGM, Gel, Flooded Lead-Acid Charging Algorithm Multi-stage (Bulk, Absorption, Float) Operating Temperature 0-90°C Protection Rating IP67 (Waterproof/Dustproof) Charger Dimensions 190mm (L) x 125mm (W) x 40mm (H) Screen Dimensions 75mm (L) x 75mm (W) x 20mm (H) Display Features Bluetooth LCD, Remote Mount MST Compatibility Yes (link multiple units for higher output) Protection Features Overcharge, Short Circuit, Temperature, Reverse Polarity Warranty 12 months or 20,000km Mounting Location Under bonnet or cabin Installation Difficulty Moderate (electrical knowledge required) Frequently Asked Questions Q: Can I use this charger with lithium batteries? A: Yes, DT-02022 fully compatible with lithium (LiFePO4) batteries including automatic lithium charging profile. Multi-stage charging algorithm optimized for lithium chemistry including appropriate absorption voltage, float voltage, and charging current. Also supports AGM, gel, and flooded lead-acid batteries—select battery type during setup ensuring correct charging parameters. Lithium profile prevents overcharging damage and supports lithium BMS (Battery Management System) integration where applicable. Q: How much solar power can this charger handle? A: Maximum 450W solar input at 50V maximum voltage. Typical configuration: three 150W solar panels in parallel (12V panels) or series-parallel combination. MPPT controller extracts maximum power from panels regardless of panel voltage—can accept higher voltage panels (24V, 36V) provided total voltage remains below 50V. MPPT regulation converts excess panel voltage to additional charging current maximizing power extraction. For panels exceeding 450W total, excess power not utilized—size solar array appropriately for maximum efficiency. Q: Can I link multiple DT-02022 units together for higher charging current? A: Yes, MST (Modular Sense Technology) enables multiple units to synchronize via CAN bus connection. Link two units for 60A combined output, three units for 90A, four units for 120A. Units communicate sharing load equally preventing single-unit overload. Common application: large lithium battery banks requiring high charge current for optimal charging (lithium manufacturers often recommend 0.5C charge rate—200Ah battery benefits from 100A charge capability). Start with single unit, add units as battery capacity expands—modular approach reducing initial cost while providing expansion capability. Q: Where should I mount this charger and is under-bonnet mounting safe? A: DT-02022 designed specifically for under-bonnet mounting with IP67 waterproof rating and 0-90°C temperature range. Under-bonnet location keeps wiring short reducing voltage drop and cable costs. Mount charger away from direct exhaust manifold heat and secure mounting preventing vibration damage. Alternative mounting locations: cabin bulkhead, behind rear seat, battery compartment. Remote LCD screen mounts separately on dashboard or accessible location—Bluetooth connection eliminates need for charger location near display. Ensure adequate ventilation around charger even with IP67 rating—trapped heat reduces efficiency. Q: What's the difference between MPPT and PWM solar charging? A: MPPT (Maximum Power Point Tracking) extracts 15-30% more power from solar panels compared to PWM (Pulse Width Modulation) controllers. MPPT continuously adjusts input voltage and current tracking panel's maximum power point—particularly effective in variable light conditions, partial shading, and non-optimal sun angles. PWM simply switches panel voltage on/off matching battery voltage—works adequately in ideal conditions but loses efficiency otherwise. MPPT critical for maximizing limited solar array output in 4WD applications where roof space limits panel quantity. DT-02022 includes MPPT regulation maximizing solar charging effectiveness.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-5SMD Telescopic Camping Light - Dual Colour Dimmable 12V LED Overhead Area Light with 3.8m Telescopic Pole, IP67 Waterproof, 50m Illumination Range for 4WD Camping and Outdoor Adventures Illuminate your campsite with Drivetech 4x4 DT-5SMD Telescopic Camping Light—featuring dual-colour dimmable LED output with white and amber modes providing versatile lighting options for camping, outdoor work, and emergency situations, 3.8m telescopic stainless steel pole extending to overhead height illuminating up to 50m radius area, five SMD LED plates delivering powerful bright illumination for entire campsite coverage, IP67 waterproof and dustproof rating withstanding rain, dust, and harsh outdoor conditions, integrated dimmer control enabling brightness adjustment from full output to low-level ambient lighting conserving battery power, 10m power cable with on/off control box and dimmer providing convenient ground-level control without lowering pole, connects directly to 12V vehicle battery with included battery clamps or cigarette lighter adapter for convenient power connection, white LED mode (4.6A at 13.2V) providing bright daylight illumination for cooking, equipment setup, and campsite tasks, amber LED mode (5.2A at 13.2V) providing insect-friendly lighting reducing bug attraction during evening hours, collapsible telescopic design packing down to compact size for easy storage and transport in 4WD vehicles and caravans, stainless steel pole construction resisting corrosion from moisture, salt spray, and outdoor exposure, stable base design maintaining upright position in windy conditions and uneven ground, multiple height adjustment positions from compact to full 3.8m extension adapting to campsite requirements and lighting needs, suitable for camping trips, 4WD touring, caravan sites, outdoor events, emergency roadside lighting, and remote work sites, eliminates need for multiple battery lanterns or torches providing comprehensive overhead illumination from single unit, significantly brighter than standard camp lights delivering professional-grade area lighting, dual-colour switching enabling mode selection without changing bulbs or fixtures, remote dimmer control preventing repeated pole raising/lowering for brightness adjustments, Drivetech 4x4 quality construction proven in extreme outback and commercial applications, 12-month or 20,000km warranty covering manufacturing defects, and providing essential overhead area lighting solution for extended camping adventures and remote touring. Product Overview Drivetech 4x4 DT-5SMD Telescopic Camping Light provides professional-grade overhead area illumination transforming campsite lighting from basic torch-level to comprehensive floodlight coverage. Telescopic 3.8m pole positions LED array overhead eliminating ground-level light limitations and shadows common with traditional camp lights. Elevated lighting position illuminates entire campsite area—cooking zone, vehicle surrounds, tent area, and equipment storage—from single centralized light source. Eliminates need for multiple lanterns, torches, and task lights simplifying campsite setup and power management. Five SMD LED plates deliver powerful bright output illuminating up to 50m radius area. Significantly brighter than standard camp lanterns providing visibility comparable to vehicle-mounted work lights. Adequate illumination for detailed tasks—meal preparation, equipment maintenance, reading maps, and vehicle repairs—without additional lighting. Multiple LED plates distribute light evenly eliminating harsh shadows and dark spots common with single-point light sources. Dual-colour output provides white and amber LED modes. White LED mode (4.6A at 13.2V) delivers bright daylight-spectrum illumination for maximum visibility during evening setup, cooking, and campsite activities. Amber LED mode (5.2A at 13.2V) provides insect-friendly lighting significantly reducing flying insect attraction compared to white light—critical for comfortable outdoor dining and relaxation during peak insect hours. Switch between modes instantly via control box adapting to changing lighting requirements throughout evening. Integrated Dimmer Control: Brightness adjustment from full output to low-level ambient lighting. Full brightness for active campsite tasks requiring maximum visibility. Reduced brightness for ambient evening lighting and conversation areas conserving battery power. Dimmer control located on ground-level control box enabling brightness adjustment without raising/lowering pole—convenient adjustment without interrupting camp activities. Progressive dimming provides infinite brightness levels between minimum and maximum enabling perfect lighting balance for any situation. IP67 Waterproof Protection: Fully sealed LED array and control electronics withstanding rain, dust, water spray, and harsh outdoor conditions. IP67 rating enables operation during unexpected rain without damage or performance degradation. Dust-proof construction prevents contamination from dusty outback conditions and beach environments. Reliable operation in all weather conditions eliminating concerns about protecting light during weather changes. Wipe-clean design simplifying maintenance after muddy or dusty conditions. Telescopic Convenience: Collapsible design packing down to compact size for easy storage in 4WD cargo areas, caravan lockers, or under-seat storage. Full 3.8m extension provides overhead mounting height maximizing coverage area and minimizing shadows. Multiple height positions enabling adjustment to campsite requirements—lower height for windy conditions or confined camping areas, full height for maximum coverage in open campsites. Stainless steel construction resisting corrosion from saltwater camping, rainforest moisture, and coastal environments. Solid construction withstanding regular extension/collapse cycles throughout camping season. Dual Power Connection Options: Battery clamps connect directly to vehicle auxiliary battery or portable battery pack for maximum power availability and extended runtime. Cigarette lighter adapter connects to vehicle accessory outlet for convenient power without opening battery compartment—ideal for quick setup during brief stops. 10m power cable provides sufficient length for positioning light away from vehicle enabling optimal campsite illumination while maintaining connection to vehicle power. Long cable eliminates need for extension cords simplifying setup and reducing trip hazards. Practical Campsite Applications: Central campsite lighting illuminating cooking area, dining space, and vehicle surrounds from single elevated source. Roadside emergency lighting providing high-visibility illumination for vehicle repairs, tire changes, and recovery operations. Outdoor event lighting for gatherings, BBQs, and social activities. Remote work site lighting for equipment maintenance, fence repairs, and agricultural tasks. Significantly more effective than multiple small lanterns while consuming less total power and requiring single setup operation. Drivetech 4x4 Quality and Support: Drivetech 4x4 proven in extreme Australian outback and commercial applications. Components designed for maximum durability in harsh outdoor conditions. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with product questions. Quality assurance for critical camping equipment. Technical Specifications SKU DT-5SMD Product Type Telescopic Camping Light Brand Drivetech 4x4 LED Configuration 5x SMD Plates (White & Amber LEDs) Light Colours White and Amber (switchable) Dimmer Control Yes (integrated in control box) Telescopic Pole Height 3.8m maximum extension Pole Material Stainless Steel Illumination Range Up to 50m radius Waterproof Rating IP67 (waterproof and dustproof) Power Cable Length 10m Operating Voltage 12V DC Current Draw (White) 4.6A @ 13.2V (~61W) Current Draw (Amber) 5.2A @ 13.2V (~69W) Power Connection Cigarette lighter adapter or battery clamps (included) Control Features On/Off switch, Dimmer control Storage Size Collapsed for compact storage Construction Stainless steel pole, weatherproof LED housing Warranty 12 months or 20,000km Applications Camping, 4WD Touring, Caravanning, Emergency Lighting, Outdoor Work Frequently Asked Questions Q: How long will this light run on my vehicle battery? A: Runtime depends on battery capacity and light mode. Typical auxiliary battery (100Ah): White mode (4.6A) = approximately 21 hours continuous, Amber mode (5.2A) = approximately 19 hours continuous. Using dimmer reduces current consumption extending runtime—50% brightness approximately doubles runtime. Deep-cycle auxiliary battery recommended for extended camping use preventing starter battery depletion. Monitor battery voltage during use—if voltage drops below 12.0V, reduce brightness or turn off light preventing excessive battery discharge. Alternator charges battery during driving recovering capacity for next evening's use. Solar panels supplement charging during multi-day camping maintaining battery capacity. Q: Why would I use amber LEDs instead of white LEDs? A: Amber (warm yellow) lighting significantly reduces flying insect attraction compared to white or blue-spectrum light. Insects attracted to UV and blue wavelengths abundant in white LED light—white light mode attracts moths, beetles, mosquitoes, and other flying insects creating nuisance around campsite. Amber light contains minimal blue spectrum dramatically reducing insect attraction while maintaining adequate visibility for dining, conversation, and ambient lighting. Use white mode during active tasks requiring maximum visibility (cooking, setup, equipment work), switch to amber mode during relaxation and dining hours minimizing insect disturbance. Amber mode particularly valuable in tropical and coastal regions with high insect populations. Q: How stable is the light at full 3.8m extension in windy conditions? A: Light includes stable base design maintaining upright position in moderate wind conditions. For windy campsites (coastal areas, exposed ridgelines, open plains), reduce extension height to 2-3m lowering wind resistance and improving stability. Guy lines or tent pegs securing base prevent tipping in very windy conditions—most users operate without additional securing in typical camping conditions. Stainless steel construction provides adequate weight for stability without requiring excessive ballast. Retract to lower height during severe wind conditions or overnight when lighting not required. Base design accommodates vehicle recovery mats or sand bags for additional weight if needed in exposed locations. Q: Can I leave this light extended overnight or should I collapse it when not in use? A: Safe to leave extended overnight if weather conditions permit—turn off via control box switch without collapsing pole enabling quick restart if needed during night. Collapse pole during severe weather (strong wind, heavy rain) or when departing campsite protecting equipment from damage. Telescopic mechanism designed for regular extension/collapse cycles—no harm in collapsing nightly if preferred. Many users extend pole at campsite arrival, collapse at departure, leaving extended throughout camping stay for convenient on/off operation without setup time. IP67 waterproof rating protects electronics during overnight rain—pole and LED array withstand weather exposure without damage. Q: Does this light interfere with vehicle electronics or radio communication? A: LED lights can potentially create electromagnetic interference affecting AM radio reception and some communication devices. DT-5SMD includes filtering minimizing interference but some AM radio noise possible at close range—position light away from vehicle if AM radio critical. FM radio, UHF radio, and vehicle electronics typically unaffected. If experiencing interference: increase distance between light and radio antenna, reduce brightness (dimmer reduces electrical noise), or switch to amber mode (lower current may reduce interference). Most users report no significant interference issues in typical camping applications. Keep power cable away from antenna leads and communication cables minimizing potential coupling.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-SB200-1 200W Foldable Solar Blanket - Portable Solar Panel with PWM 10A Charge Controller, Anderson Connectors, and Complete Wiring Kit for 4WD Camping, Caravan, and Off-Grid Battery Charging Power your off-grid adventures with Drivetech 4x4 DT-SB200-1 200W Foldable Solar Blanket—featuring high-output 200W monocrystalline solar panel delivering up to 9.81A charging current for rapid auxiliary battery charging at campsite, portable foldable design packing from large 1100mm × 1105mm deployed size to compact 530mm × 385mm × 105mm folded dimensions for easy storage and transport, included PWM 10A solar charge controller regulating charging voltage preventing battery overcharge and providing safe automatic charging for 12V and 24V battery systems, complete wiring kit with 5m heavy-duty 4mm² cable and Anderson-style quick-disconnect plugs enabling convenient setup and connection to auxiliary battery systems, additional 0.5m alligator clip adapter providing direct battery terminal connection without permanent wiring, durable Polish PET (polyethylene terephthalate) construction providing weather resistance, UV protection, and impact resistance for harsh outdoor environments, maximum power voltage 20.2V and open circuit voltage 24.2V suitable for charging 12V lead-acid, AGM, gel, and lithium batteries through PWM regulation, maximum power current 9.81A providing substantial charging capacity recovering battery capacity during daylight hours at campsite, short circuit current 10.82A with controller protection preventing damage during wiring faults, ultra-thin 5mm thickness when deployed creating minimal storage volume when folded, integrated carry handle and protective storage case simplifying transport and preventing panel damage during transit, quick deployment design enabling setup in minutes without tools or complex installation, Anderson connector compatibility with common auxiliary battery systems and DC-DC chargers, PWM charge controller LCD display showing charging status, battery voltage, charging current, and system diagnostics, automatic multi-stage charging algorithm (bulk, absorption, float) optimizing battery health and charging efficiency, suitable for camping trips recovering auxiliary battery capacity between driving days, caravan installations supplementing DC-DC charger with solar charging while stationary, off-grid work sites providing portable power for equipment and tools, emergency backup power for home battery systems during outages, and remote locations requiring mobile solar charging capability, eliminates generator noise and fuel costs providing silent renewable power generation, significantly faster charging than small rigid panels enabling meaningful daily battery recovery, weatherproof construction withstanding rain, dust, and harsh outdoor conditions, includes comprehensive user manual with setup instructions and charging guidelines, Drivetech 4x4 Australian designed for outback touring and remote applications, 12-month or 20,000km warranty covering manufacturing defects, and providing essential portable high-output solar charging solution for extended off-grid camping and touring adventures. Product Overview Drivetech 4x4 DT-SB200-1 200W Foldable Solar Blanket provides high-output portable solar charging transforming campsite battery management. 200W output delivers substantial charging current—9.81A maximum power current significantly faster than typical 100-120W portable panels (5-6A output). Rapid charging enables meaningful daily battery recovery during multi-day camping trips without requiring vehicle engine running or generator operation. Example: typical 100Ah auxiliary battery depleted to 50% capacity (50Ah consumed) recovers approximately 40-50Ah during 6 hours optimal sunlight—nearly full recharge from single day solar charging. Foldable design provides large 1100mm × 1105mm deployed area maximizing solar collection while packing to compact 530mm × 385mm × 105mm folded size. Significantly more portable than equivalent rigid panels (200W rigid panel typically 1600mm × 800mm × 35mm—awkward storage dimensions). Folded blanket stores under rear seat, in storage compartments, or stacked with camping gear without consuming excessive space. Ultra-thin 5mm deployed thickness creates minimal storage volume when folded—multiple blankets stack efficiently for high-capacity solar installations. Included PWM 10A charge controller provides complete charging solution requiring only battery connection. Controller regulates panel output voltage matching battery chemistry and charge stage preventing overcharging damage. LCD display shows real-time charging status—battery voltage, charging current, daily amp-hours generated—enabling monitoring without separate instrumentation. Automatic multi-stage charging progresses through bulk (maximum current), absorption (tapering current), and float (maintenance) stages optimizing battery health. Controller protects against reverse polarity connection, short circuit, and overload preventing equipment damage from wiring errors. High-Output Charging Performance: 200W output and 9.81A maximum current delivers professional-grade charging performance rivaling small fixed installations. Charging rate adequate for recovering heavy daily consumption—running fridge (3-4A continuous), LED lighting (2-3A evening), water pump (5A intermittent), USB devices (1-2A)—total daily consumption 50-70Ah recovered during daylight hours. Enables true off-grid camping sustainability without auxiliary charging from vehicle alternator—camp multiple consecutive days maintaining battery capacity through solar alone. Significantly more capable than 100W panels requiring alternator charging every 2-3 days supplementing inadequate solar capacity. PWM vs MPPT Technology: PWM (Pulse Width Modulation) controller included provides reliable economical charging adequate for most camping applications. PWM matches panel voltage to battery voltage—works efficiently when panel voltage closely matches battery charging voltage. Alternative MPPT (Maximum Power Point Tracking) controllers extract 15-30% additional power from panels but cost significantly more. For 200W camping application, PWM provides excellent value—9.81A charging current adequate for typical auxiliary battery recovery without premium MPPT cost. Users requiring maximum efficiency or larger multi-panel installations may upgrade to external MPPT controller (sold separately) for enhanced performance. Complete Wiring Kit: Included 5m 4mm² cable with Anderson-style plugs provides heavy-duty connection from panel to battery/controller. 5m length enables flexible panel positioning—place panel in optimal sun exposure (away from vehicle shade, angled toward sun) while maintaining connection to battery. Anderson quick-disconnect plugs enable rapid setup and breakdown—connect panel arriving at campsite, disconnect when departing—no tools or terminal screws required. Additional 0.5m alligator clip adapter connects directly to battery terminals for installations without permanent Anderson connectors—clip positive to battery positive, negative to battery negative, no wiring modifications required. Polish PET Construction: Durable PET (polyethylene terephthalate) substrate provides weather resistance, UV protection, and impact resistance. Flexible construction withstands folding and unfolding cycles without cracking or delamination—rigid panels suffer glass breakage and frame damage during rough handling. PET surface resists scratching and cleaning—wipe with damp cloth removing dust and dirt maintaining efficiency. Weatherproof construction withstands rain, dew, and humid conditions—leave deployed overnight or during weather changes without damage. Significantly more durable than cheap fabric-backed panels prone to delamination and water ingress. Rapid Deployment and Storage: Quick-setup design enables full deployment in under 2 minutes without tools. Unfold blanket, position for optimal sun exposure, connect Anderson plug to battery system, verify controller display showing charging—complete setup. Folding reverses process—disconnect Anderson plug, fold panels into compact bundle, secure with integrated straps, store in protective case. Significantly faster than rigid panel setup requiring frame assembly, cable connection, and angling adjustments. Time savings valuable during brief stops or overnight camping requiring quick setup and departure. Versatile Mounting Options: Foldable design enables ground deployment, vehicle roof draping, or elevated positioning on camp furniture. Ground deployment simplest—unfold on ground facing sun, secure corners with tent pegs or weights preventing wind displacement. Vehicle roof draping (caravans, camper trailers) positions panel elevated preventing shade obstruction while securing against wind. Elevated positioning on camp table or equipment maximizes sun angle avoiding ground shade from surrounding vegetation. Flexible deployment accommodates varied campsite configurations impossible with rigid panels requiring fixed mounting. Multiple Battery Compatibility: PWM controller supports 12V and 24V battery systems with automatic voltage detection. Charges lead-acid, AGM, gel, and calcium batteries with appropriate charging profiles. For lithium (LiFePO4) batteries, verify controller lithium compatibility or upgrade to lithium-specific controller—standard PWM profiles may not optimally charge lithium chemistry. Most camping applications use AGM auxiliary batteries—controller default AGM profile provides optimal charging without adjustment. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for outback touring and remote applications. Components engineered for harsh Australian conditions—extreme heat, dust, and UV exposure. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with setup and charging questions. Quality assurance for critical power generation equipment. Technical Specifications SKU DT-SB200-1 Product Type Foldable Solar Blanket with PWM Controller Brand Drivetech 4x4 Maximum Power Output 200W Maximum Power Voltage 20.2V Maximum Power Current 9.81A Open Circuit Voltage 24.2V Short Circuit Current 10.82A Charge Controller PWM 10A (included) Controller Compatibility 12V and 24V systems Panel Construction Polish PET (Polyethylene Terephthalate) Deployed Dimensions 1100mm (L) × 1105mm (W) × 5mm (H) Folded Dimensions 530mm (L) × 385mm (W) × 105mm (H) Cable Length 5m (4mm² with Anderson plugs) Alligator Clip Adapter 0.5m (2.5mm² to Anderson) Connector Type Anderson-style quick-disconnect Weight Lightweight portable design Battery Compatibility 12V/24V Lead-Acid, AGM, Gel, Calcium (Lithium with compatible controller) Weather Resistance Weatherproof (rain and dust resistant) Warranty 12 months or 20,000km Applications 4WD Camping, Caravan, Off-Grid Power, Emergency Backup Frequently Asked Questions Q: How long does it take to fully charge a 100Ah auxiliary battery with this panel? A: Charging time depends on battery state of charge, sunlight conditions, and battery chemistry. Example: 100Ah AGM battery depleted to 50% capacity (50Ah consumed) in optimal conditions (bright sun, panel perpendicular to sun) generates approximately 8-9A charging current. Bulk charging phase (50-80% charge) at 8-9A recovers 24-27Ah in 3 hours. Absorption phase (80-100% charge) tapers current recovering remaining 23-26Ah in 3-4 hours. Total charging time approximately 6-7 hours optimal sunlight conditions. Real-world conditions (morning/afternoon reduced intensity, panel angle compromise) extend time to 7-9 hours. Cloudy conditions reduce output 50-70% significantly extending charging time. For reliable daily recovery, target 40-60% battery discharge overnight—recoverable within typical 6-8 hours daylight at campsite. Q: Can I connect this directly to my battery or do I need the PWM controller? A: Always use PWM controller—never connect panel directly to battery. Direct connection risks overcharging damage—24.2V open circuit voltage exceeds safe battery charging voltage (14.4-14.8V). Overcharging causes excessive gassing (water loss in flooded batteries), plate corrosion, and thermal runaway (potential fire risk). PWM controller regulates panel voltage matching battery requirements preventing overcharge. Controller also prevents reverse discharge at night—without controller, battery powers panel during darkness draining battery. PWM controller essential for safe reliable charging protecting battery investment and preventing equipment damage. Q: How does this compare to installing rigid solar panels on my vehicle roof? A: Each approach advantages and tradeoffs. Foldable blanket advantages: portable (deploy only when needed, remove for urban driving), positioning flexibility (place in optimal sun angle impossible with fixed roof mounting), easy storage when not camping, simple setup without permanent vehicle modifications, affordable initial investment. Rigid roof panel advantages: automatic charging while driving and stationary (no deployment required), permanent installation eliminating setup time, more durable mounting resisting theft and weather, often higher total capacity (multiple panels possible). Best solution often combines both—small fixed roof panel (100-160W) maintaining battery during travel, deployable blanket supplementing capacity at extended campsites. Fixed panels excel for full-time touring, blankets excel for occasional camping and flexibility. Q: What happens on cloudy days or in partial shade? A: Cloudy conditions reduce output 30-70% depending on cloud density—light clouds 30-40% reduction (6-7A output), heavy overcast 60-70% reduction (3-4A output). Partial shade significantly impacts output—single shaded cell reduces entire panel output (series wiring limitation). Position panel avoiding shade from vehicles, trees, and equipment maximizing available sunlight. Morning dew and dust accumulation also reduces output—wipe panel surface daily maintaining efficiency. During extended cloudy periods (multi-day rain), solar output insufficient for meaningful charging—reduce consumption, run vehicle engine periodically charging battery through DC-DC charger, or run generator if available. Monitor battery voltage preventing excessive discharge—below 12.2V (50% charge) risks battery damage if discharge continues. Q: Can I use multiple solar blankets together for higher output? A: Yes, multiple blankets connect parallel increasing total current output. Example: two 200W blankets parallel-connected generate approximately 18-20A combined charging current (double single blanket). Requires solar panels with identical voltage specifications and parallel connection adapter cables (MC4 Y-branch connectors or Anderson parallel harnesses). Total current must not exceed charge controller rating—included 10A PWM controller inadequate for multi-blanket setup requiring upgraded 20-30A controller. Many users start single 200W blanket, add second blanket later for higher-capacity installations requiring faster charging. Professional multi-panel installations benefit from MPPT controller maximizing efficiency from larger panel arrays. Ensure battery bank capacity adequate for higher charging current—small batteries (50-75Ah) may not safely accept 18-20A charging current.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-SB120-1 120W Foldable Solar Blanket - Compact Portable Solar Panel with PWM 10A Charge Controller, Anderson Connectors, and Complete Wiring Kit for 4WD Camping, Caravan, and Off-Grid Battery Charging Power your camping adventures with Drivetech 4x4 DT-SB120-1 120W Foldable Solar Blanket—featuring 120W monocrystalline solar panel delivering up to 5.97A charging current for efficient auxiliary battery charging at campsite, ultra-compact portable foldable design packing from 1100mm × 700mm deployed size to exceptionally small 360mm × 360mm × 70mm folded dimensions for easy storage and transport, included PWM 10A solar charge controller regulating charging voltage preventing battery overcharge and providing safe automatic charging for 12V and 24V battery systems, complete wiring kit with 5m heavy-duty 4mm² cable and Anderson-style quick-disconnect plugs enabling convenient setup and connection to auxiliary battery systems, additional 0.5m alligator clip adapter providing direct battery terminal connection without permanent wiring, durable Polish PET (polyethylene terephthalate) construction providing weather resistance, UV protection, and impact resistance for harsh outdoor environments, maximum power voltage 20.2V and open circuit voltage 23.6V suitable for charging 12V lead-acid, AGM, gel, and lithium batteries through PWM regulation, maximum power current 5.97A providing substantial charging capacity maintaining battery charge during extended camping trips, short circuit current 6.62A with controller protection preventing damage during wiring faults, ultra-thin 5mm thickness when deployed creating minimal storage volume when folded, integrated carry handle and protective storage case simplifying transport and preventing panel damage during transit, quick deployment design enabling setup in minutes without tools or complex installation, Anderson connector compatibility with common auxiliary battery systems and DC-DC chargers, PWM charge controller LCD display showing charging status, battery voltage, charging current, and system diagnostics, automatic multi-stage charging algorithm (bulk, absorption, float) optimizing battery health and charging efficiency, suitable for camping trips supplementing DC-DC charger maintaining auxiliary battery capacity, caravan installations providing solar charging while stationary, weekend camping recovering battery capacity between trips, emergency backup power for small battery systems, and remote locations requiring lightweight mobile solar charging capability, eliminates generator noise and fuel costs providing silent renewable power generation, compact folded dimensions enabling storage in tight spaces under seats and in storage compartments, weatherproof construction withstanding rain, dust, and harsh outdoor conditions, ideal entry-level solar solution for 50-75Ah auxiliary battery systems, includes comprehensive user manual with setup instructions and charging guidelines, Drivetech 4x4 Australian designed for outback touring and remote applications, 12-month or 20,000km warranty covering manufacturing defects, and providing essential compact portable solar charging solution for weekend camping and touring adventures. Product Overview Drivetech 4x4 DT-SB120-1 120W Foldable Solar Blanket provides efficient portable solar charging in exceptionally compact package. 120W output delivers 5.97A maximum power current—adequate for maintaining typical 50-75Ah auxiliary battery systems during weekend and extended camping trips. Charging capacity sufficient for offsetting daily consumption from fridge (3-4A continuous), LED lighting (1-2A evening), water pump (occasional use), and USB devices—typical daily consumption 25-35Ah recovered during daylight hours preventing battery depletion. Perfect balance between portability and charging performance for typical camping requirements. Ultra-compact folded dimensions (360mm × 360mm × 70mm) set this blanket apart from larger solar solutions. Significantly smaller when folded than equivalent 120W rigid panels or larger 200W foldable blankets. Compact size enables storage under rear seats, in small storage compartments, alongside camping gear without consuming excessive space. Particularly valuable for space-constrained vehicles—wagons, smaller SUVs, dual-cab utes with limited storage—where larger solar panels impractical. Lightweight construction enables easy handling and positioning during setup. Included PWM 10A charge controller provides complete charging solution requiring only battery connection. Controller regulates panel output voltage matching battery chemistry and charge stage preventing overcharging damage. LCD display shows real-time charging status—battery voltage, charging current, daily amp-hours generated—enabling monitoring without separate instrumentation. Automatic multi-stage charging progresses through bulk (maximum current), absorption (tapering current), and float (maintenance) stages optimizing battery health. Controller protects against reverse polarity connection, short circuit, and overload preventing equipment damage from wiring errors. Optimal for 50-75Ah Battery Systems: 120W output ideally suited for typical auxiliary battery installations—50-75Ah AGM or lithium batteries common in weekend camping and touring setups. 5.97A charging current provides approximately 30-36Ah daily recovery during optimal sunlight conditions (6 hours quality sun exposure)—adequate for typical camping consumption without depleting battery. Larger 100Ah+ battery systems benefit from 200W blanket's higher output, smaller 50-75Ah systems well-served by 120W blanket's efficient charging without excess capacity. Right-sized solution avoiding over-investment in unnecessary solar capacity for typical camping requirements. Exceptional Portability: 360mm × 360mm × 70mm folded dimensions create truly portable solar solution. Fits standard backpacks, camping storage totes, and vehicle underseat storage. Significantly more portable than 200W foldable blanket (530mm × 385mm × 105mm) or rigid panels requiring dedicated storage mounting. Transport easily between vehicles, take on camping trips, store efficiently during non-camping seasons. Lightweight construction enables carrying to optimal deployment location away from vehicle shade—position in full sun while maintaining connection to vehicle battery through 5m cable. PWM Charge Controller Performance: PWM (Pulse Width Modulation) controller included provides reliable economical charging perfect for 120W camping application. PWM matches panel voltage to battery voltage—works efficiently when panel voltage closely matches battery charging voltage. 10A controller rating adequate for 120W panel output with headroom preventing overheating during optimal conditions. LCD display provides essential monitoring—verify charging operation, monitor battery voltage, track daily energy generation. Controller automatic operation requires no adjustment—connect panel, controller manages charging automatically throughout day. Complete Wiring Kit: Included 5m 4mm² cable with Anderson-style plugs provides heavy-duty connection from panel to battery/controller. 5m length enables flexible panel positioning—place panel in optimal sun exposure (away from vehicle shade, angled toward sun) while maintaining connection to battery system. Anderson quick-disconnect plugs enable rapid setup and breakdown—connect panel arriving at campsite, disconnect when departing—no tools required. Additional 0.5m alligator clip adapter connects directly to battery terminals for installations without permanent Anderson connectors—clip positive to battery positive, negative to battery negative, immediate solar charging without wiring modifications. Polish PET Construction: Durable PET (polyethylene terephthalate) substrate provides weather resistance, UV protection, and impact resistance. Flexible construction withstands folding and unfolding cycles without cracking or delamination—rigid panels suffer glass breakage and frame damage during rough handling. PET surface resists scratching and cleaning—wipe with damp cloth removing dust and dirt maintaining efficiency. Weatherproof construction withstands rain, dew, and humid conditions—leave deployed overnight or during weather changes without damage. Significantly more durable than budget fabric-backed panels prone to delamination and water ingress. Rapid Deployment and Storage: Quick-setup design enables full deployment in under 2 minutes without tools. Unfold blanket, position for optimal sun exposure, connect Anderson plug to battery system, verify controller display showing charging—complete setup. Folding reverses process—disconnect Anderson plug, fold panels into compact bundle, secure with integrated straps, store in protective case. Significantly faster than rigid panel setup requiring frame assembly, cable connection, and angling adjustments. Time savings valuable during brief stops or overnight camping requiring quick setup and departure. Versatile Mounting Options: Foldable design enables ground deployment, vehicle roof draping, or elevated positioning on camp furniture. Ground deployment simplest—unfold on ground facing sun, secure corners with tent pegs or weights preventing wind displacement. Vehicle roof draping (caravans, camper trailers) positions panel elevated preventing shade obstruction while securing against wind. Elevated positioning on camp table or equipment maximizes sun angle avoiding ground shade from surrounding vegetation. Flexible deployment accommodates varied campsite configurations impossible with rigid panels requiring fixed mounting. Multiple Battery Compatibility: PWM controller supports 12V and 24V battery systems with automatic voltage detection. Charges lead-acid, AGM, gel, and calcium batteries with appropriate charging profiles. For lithium (LiFePO4) batteries, verify controller lithium compatibility or upgrade to lithium-specific controller—standard PWM profiles may not optimally charge lithium chemistry. Most camping applications use AGM auxiliary batteries—controller default AGM profile provides optimal charging without adjustment. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for outback touring and remote applications. Components engineered for harsh Australian conditions—extreme heat, dust, and UV exposure. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with setup and charging questions. Quality assurance for critical power generation equipment. Technical Specifications SKU DT-SB120-1 Product Type Foldable Solar Blanket with PWM Controller Brand Drivetech 4x4 Maximum Power Output 120W Maximum Power Voltage 20.2V Maximum Power Current 5.97A Open Circuit Voltage 23.6V Short Circuit Current 6.62A Charge Controller PWM 10A (included) Controller Compatibility 12V and 24V systems Panel Construction Polish PET (Polyethylene Terephthalate) Deployed Dimensions 1100mm (L) × 700mm (W) × 5mm (H) Folded Dimensions 360mm (L) × 360mm (W) × 70mm (H) Cable Length 5m (4mm² with Anderson plugs) Alligator Clip Adapter 0.5m (2.5mm² to Anderson) Connector Type Anderson-style quick-disconnect Weight Lightweight compact design Battery Compatibility 12V/24V Lead-Acid, AGM, Gel, Calcium (Lithium with compatible controller) Weather Resistance Weatherproof (rain and dust resistant) Ideal Battery Size 50-75Ah auxiliary batteries Warranty 12 months or 20,000km Applications Weekend Camping, 4WD Touring, Caravan, Off-Grid Power Frequently Asked Questions Q: How long does it take to charge a typical auxiliary battery with this panel? A: Charging time depends on battery capacity, state of charge, and sunlight conditions. Example: 60Ah AGM battery depleted to 50% capacity (30Ah consumed) in optimal conditions (bright sun, panel perpendicular to sun) generates approximately 5-5.5A charging current. Bulk charging phase at 5-5.5A recovers approximately 24-27Ah in 5 hours. Absorption phase tapers current recovering remaining 3-6Ah in 1-2 hours. Total charging time approximately 6-7 hours optimal sunlight. Real-world conditions (morning/afternoon reduced intensity, panel angle compromise) extend time to 7-9 hours. For typical weekend camping with 50-75Ah battery consuming 25-35Ah daily, panel recovers consumption during single day sunlight maintaining battery capacity indefinitely. Larger 100Ah+ batteries benefit from 200W blanket's faster charging. Q: Is 120W enough solar power for my camping setup? A: 120W adequate for typical weekend and extended camping with moderate consumption. Calculate daily amp-hour consumption: fridge 3-4A × 24 hours = 72-96Ah (but duty cycle 30-50% = 22-48Ah actual), LED lighting 2-3A × 4 hours evening = 8-12Ah, water pump occasional use = 1-2Ah, USB devices = 2-3Ah. Total typical consumption 33-65Ah daily depending on fridge efficiency and usage patterns. 120W panel generates 30-36Ah daily optimal conditions—adequate for lower consumption setups, marginal for high consumption requiring conservation or supplemental DC-DC charging during driving. If consumption consistently exceeds 40Ah daily, consider 200W blanket providing faster recovery and higher margin. If consumption below 35Ah daily, 120W blanket provides excellent balance between portability and capacity. Q: How does this compare to the 200W solar blanket (DT-SB200-1)? A: 120W vs 200W comparison: 120W advantages—more compact folded size (360×360×70mm vs 530×385×105mm), lighter weight, lower cost, adequate for 50-75Ah batteries and moderate consumption. 200W advantages—faster charging (9.81A vs 5.97A), better for 100Ah+ batteries, higher daily generation (60-72Ah vs 36-42Ah optimal), quicker recovery from heavy consumption. Choose 120W for: weekend camping, compact vehicles, 50-75Ah batteries, moderate consumption, budget-conscious buyers. Choose 200W for: extended touring, larger batteries, high consumption (constantly running fridge, multiple devices), faster recovery requirements, comprehensive off-grid capability. Many users find 120W adequate for typical camping needs without excess capacity. Q: Can I leave this deployed overnight or should I fold it up? A: Safe to leave deployed overnight—no reverse discharge through PWM controller (controller blocks reverse current flow at night). Leaving deployed eliminates daily folding/unfolding saving time and enabling automatic charging at sunrise without manual intervention. However, consider: weather exposure (pack away during storms preventing wind damage), theft risk (visible expensive equipment when camping in populated areas), ground moisture (morning dew on ground-deployed panel—wipe before folding preventing mold), storage space versus convenience trade-off. Extended camping at single location—leave deployed for convenience. Moving frequently between campsites—fold daily for transport. Many users leave deployed during multi-day stays at established campsites, pack daily during touring with frequent moves. Q: What accessories do I need for a complete solar charging system? A: DT-SB120-1 includes everything needed for basic solar charging: panel, PWM controller, 5m Anderson cable, alligator clips adapter. Additional accessories improving installation: permanent Anderson connector on auxiliary battery (eliminates alligator clips for cleaner connection), battery monitor showing state of charge and consumption (helps optimize solar/consumption balance), extension cable if 5m insufficient reaching battery location, spare Anderson connectors for multi-battery installations, mounting brackets for semi-permanent caravan installation, waterproof storage bag protecting panel during non-camping storage. Most users operate successfully with included components—additional accessories enhance convenience but not essential. Consider adding battery monitor (Drivetech DT-17012 or similar) enabling consumption tracking and solar performance assessment.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-SPF160-1 160W Semi-Flexible Solar Panel - Ultra-Thin ETFE Coated Panel with MC4 Connectors for Permanent Vehicle Roof, Caravan, Marine, and Curved Surface Solar Installations Upgrade your vehicle with permanent solar charging using Drivetech 4x4 DT-SPF160-1 160W Semi-Flexible Solar Panel—featuring ultra-thin 3mm profile enabling mounting on curved surfaces including vehicle roofs, caravan roofs, boat decks, and RV tops impossible with rigid glass panels, high-efficiency 160W monocrystalline cells delivering up to 8.65A charging current for continuous auxiliary battery charging while parked and driving, premium ETFE (Ethylene Tetrafluoroethylene) coating providing superior weather resistance, UV protection, and self-cleaning properties exceeding traditional glass panel durability, anti-crack film construction preventing cell damage from flexing and impact ensuring reliable long-term performance on mobile installations, lightweight flexible design conforming to curved roof profiles up to 30-degree bend radius, stainless steel mounting eyelets providing corrosion-resistant permanent installation points around panel perimeter, 90cm integrated cable with industry-standard MC4 quick-disconnect connectors simplifying connection to solar charge controller and battery system, maximum power voltage 18.5V and open circuit voltage 21.6V optimized for 12V battery charging through MPPT or PWM controllers, maximum power current 8.65A providing substantial continuous charging maintaining auxiliary battery capacity without engine operation, short circuit current 9.68A with proper controller protection, large 1245mm × 670mm panel area maximizing solar collection in limited roof space, ultra-thin 3mm thickness creating minimal aerodynamic profile reducing wind resistance and noise compared to thick rigid panels, suitable for permanent installation on 4WD vehicle roofs providing automatic charging during parking and travel, caravan and motorhome roof mounting supplementing shore power and generator with renewable solar charging, boat deck installation providing reliable marine power generation, camper trailer roof mounting enabling off-grid camping without generator dependence, and commercial vehicle installations maintaining auxiliary systems during layover periods, eliminates daily panel deployment required with portable panels providing set-and-forget automatic charging, ETFE coating resists scratching, environmental contamination, and degradation maintaining efficiency over years of outdoor exposure, flexible construction withstands vehicle vibration, roof flex, and impact from branches and debris impossible with brittle glass panels, stainless steel eyelets resist saltwater corrosion in marine applications, MC4 connectors enable professional weatherproof wiring connection to charge controller (sold separately), requires MPPT or PWM solar charge controller for battery connection preventing overcharge damage, panel generates power during all daylight hours automatically maintaining auxiliary battery eliminating alternator charging dependency, ideal for vehicles with auxiliary battery systems requiring continuous charging during extended parking periods, Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments, 12-month or 20,000km warranty covering manufacturing defects, and providing essential permanent solar charging solution for vehicle-based power independence. Product Overview Drivetech 4x4 DT-SPF160-1 160W Semi-Flexible Solar Panel provides permanent roof-mounted solar charging transforming auxiliary battery management from reactive (charging when depleted) to proactive (continuously maintaining full charge). Permanent installation eliminates daily portable panel deployment—solar panel automatically generates power whenever daylight present maintaining auxiliary battery capacity during parking, camping, and driving. Set-and-forget operation providing worry-free battery maintenance impossible with portable panels requiring manual setup. Ultra-thin 3mm profile enables mounting on curved surfaces impossible with rigid glass panels (typically 35-50mm thick). Flexible construction conforms to vehicle roof curves, caravan aerodynamic profiles, and boat deck contours maintaining contact across entire panel area. Bend radius up to 30 degrees accommodates moderate roof curvature—flat to gently curved surfaces. Significantly more versatile than rigid panels requiring perfectly flat mounting surface with complex brackets. Flexible installation follows roof profile creating low-profile aerodynamic installation minimizing wind resistance and noise. Premium ETFE coating provides superior weather protection exceeding traditional glass panel durability. ETFE (Ethylene Tetrafluoroethylene) fluoropolymer offers exceptional UV resistance—maintains transparency and efficiency over decades of sun exposure without yellowing or degradation. Self-cleaning properties prevent dirt and dust adhesion—rain naturally cleans surface maintaining efficiency without manual cleaning. Impact resistance prevents damage from hail, branches, and debris—flexible substrate absorbs impact energy instead of shattering like glass. Saltwater corrosion resistance ideal for marine installations—ETFE resists saltwater spray and coastal environmental exposure. 160W Output Performance: 8.65A maximum power current provides substantial continuous charging for typical auxiliary battery systems. Daily generation example: 6 hours quality sunlight generates 45-52Ah maintaining auxiliary battery capacity. Sufficient for offsetting typical camping consumption—fridge 3-4A continuous (22-28Ah daily with 30-40% duty cycle), LED lighting occasional use (4-8Ah evening), water pump intermittent (1-2Ah), USB devices (2-3Ah). Total typical consumption 29-41Ah daily—160W panel output maintains battery capacity enabling extended off-grid camping without alternator charging dependency. Permanent Installation Advantages: Roof-mounted solar eliminates portable panel deployment chores. Arrive at campsite—solar already working, no setup required. Leave campsite—solar secured on roof, no packing required. Panel generates power during driving and parking automatically maintaining battery. Particularly valuable for: full-time travelers requiring continuous charging, urban parking between trips maintaining battery preventing discharge, work vehicles requiring auxiliary system power during equipment operation, boats moored at marina maintaining house battery without shore power connection. ETFE vs Glass Panel Comparison: ETFE flexible panels advantages—lightweight (50% lighter than glass), impact resistant (no shattering), conforms to curves, thinner profile, withstands flexing. Glass rigid panels advantages—slightly higher efficiency (1-2%), lower cost, proven long-term performance (20+ years documented). For mobile applications (vehicles, caravans, boats), flexible panels superior due to weight savings, impact resistance, and curved surface mounting. For fixed ground installations, rigid glass panels cost-effective. Vehicle roof installations benefit significantly from flexible panel advantages. Stainless Steel Eyelet Mounting: Eyelets around panel perimeter provide multiple mounting points enabling secure attachment to various roof profiles. Typical installation: marine-grade VHB adhesive tape bonding panel to clean roof surface, supplemental eyelet fasteners through roof (with proper sealing) for high-security mounting, or combination approach (adhesive primary, eyelets backup). Stainless steel resists corrosion from weather exposure and saltwater spray. Mounting flexibility accommodates different roof materials—painted metal, fiberglass, aluminum, composite—with appropriate adhesives and fasteners. MC4 Connector Integration: Industry-standard MC4 connectors simplify professional solar installation wiring. MC4 connectors weatherproof, secure, and tool-free connection/disconnection (with proper MC4 tools). Connect panel MC4 output to solar charge controller MC4 input, controller output to battery. MC4 system enables series/parallel panel connections for multi-panel installations—series connection increases voltage (2× 160W = 36.7V, suitable for MPPT controllers), parallel connection increases current (2× 160W = 17.3A). MC4 compatibility ensures professional installation standards and future expandability. Requires Separate Charge Controller: Panel does not include charge controller—designed for permanent installations with separate MPPT or PWM controller. MPPT controller recommended for maximum efficiency (15-30% more power extraction than PWM). Controller prevents overcharging, regulates charging voltage, and prevents reverse discharge at night. Never connect panel directly to battery—21.6V open circuit voltage exceeds safe battery charging voltage causing damage. Budget installations use PWM controller (economical), premium installations use MPPT controller (maximum efficiency). Controller selection based on total solar array size and battery capacity. Professional Installation Recommended: Roof-mounted solar installation requires: roof penetration sealing (if fastening through roof), proper adhesive selection, cable routing through vehicle/boat, charge controller installation and wiring, waterproofing and strain relief. Professional installers ensure watertight installation preventing leaks and corrosion. Competent DIY installers achieve successful results with careful planning, proper materials, and attention to waterproofing details. Critical: test installation with water hose before finalizing—identify leaks early preventing interior damage. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments. Components engineered for mobile installation vibration and environmental exposure. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with installation planning and technical questions. Quality assurance for critical permanent installations. Technical Specifications SKU DT-SPF160-1 Product Type Semi-Flexible Solar Panel Brand Drivetech 4x4 Maximum Power Output 160W Maximum Power Voltage 18.5V Maximum Power Current 8.65A Open Circuit Voltage 21.6V Short Circuit Current 9.68A Panel Construction ETFE coating with anti-crack film Cell Type Monocrystalline Panel Dimensions 1245mm (L) × 670mm (W) × 3mm (H) Panel Thickness 3mm (ultra-thin) Bend Radius Up to 30 degrees Mounting Stainless steel eyelets (adhesive + fasteners) Cable Length 90cm (4mm²) Connector Type MC4 (industry standard) Weight Lightweight flexible design Charge Controller Not included (MPPT or PWM required) Weather Resistance ETFE coating (UV resistant, waterproof) Warranty 12 months or 20,000km Applications Vehicle Roof, Caravan Roof, Boat Deck, RV, Curved Surface Installations Installation Type Permanent mounting (adhesive and/or fasteners) Frequently Asked Questions Q: Can I install this panel myself or do I need professional installation? A: DIY installation possible with careful planning and proper materials. Critical steps: (1) Clean roof surface thoroughly (alcohol wipe removing oils/contaminants), (2) Apply marine-grade VHB adhesive tape or solar panel adhesive to panel back (3M VHB 4991 common choice), (3) Position panel on roof ensuring optimal sun exposure and avoiding roof obstructions, (4) Press firmly achieving full adhesive contact, (5) Optional: drill through eyelets (with proper waterproof fasteners and sealant) for supplemental security, (6) Route cable through roof gland or existing entry point (seal thoroughly), (7) Connect to charge controller and battery with proper fusing. Professional installation recommended if uncomfortable with: roof penetrations, waterproofing, electrical wiring, adhesive bonding techniques. Poor installation risks roof leaks causing interior water damage—test thoroughly with water spray before finalizing. Q: What charge controller should I use with this panel? A: Two options: MPPT (Maximum Power Point Tracking) controller recommended for maximum efficiency, PWM (Pulse Width Modulation) controller economical alternative. For single 160W panel: 20A MPPT controller (Victron, Redarc, CTEK) extracts maximum power (15-30% more than PWM) particularly valuable in variable light conditions, 10-20A PWM controller (budget option) adequate for single panel providing reliable charging at lower cost. MPPT advantages: higher efficiency, better low-light performance, handles higher input voltage enabling series panel connections. PWM advantages: lower cost, simpler operation, adequate for basic installations. Calculate total solar array size—multiple panels require higher-capacity controller. Size controller for 25% margin above panel current—160W panel (8.65A) requires minimum 11A controller, 20A controller provides comfortable margin. Q: How do I mount this to a curved roof surface? A: Flexible panel conforms to curves up to 30-degree bend radius. Mounting procedure: (1) Test-fit panel on roof verifying full contact across surface—severe curves may prevent contact at panel edges requiring smaller panel or flatter mounting location, (2) Clean roof thoroughly with alcohol removing all contamination, (3) Apply high-quality adhesive—marine VHB tape (3M 4991) or Sikaflex construction adhesive proven for solar installations, (4) Position panel carefully—once adhesive contacts cannot reposition without damage, (5) Press firmly rolling across entire panel achieving uniform contact, (6) Allow adhesive cure time (24-72 hours typically) before vehicle use, (7) Optional supplemental security: fasteners through eyelets with proper sealant (Sikaflex, 3M 4200) waterproofing penetrations. Severe curves (over 30 degrees) may require multiple smaller panels instead of single large panel maintaining contact across entire panel area. Q: Will this panel work while driving or only when parked? A: Panel generates power whenever receiving sunlight—driving and parked. Driving benefits: panel supplements alternator reducing alternator load, charges auxiliary battery simultaneously with starter battery (if DC-DC charger installed), maintains charge on vehicles with high auxiliary consumption (fridges, communication equipment). Parked benefits: maintains battery during extended parking, charges battery during camping without engine operation, prevents discharge from alarm systems and vehicle electronics during storage. Continuous generation valuable for: full-time travelers maximizing charging opportunities, work vehicles requiring auxiliary power during equipment operation, emergency vehicles maintaining readiness during standby periods. Panel output during driving slightly reduced by: non-optimal angle (horizontal roof vs angled toward sun), vehicle shade (trees, buildings), dirty panel (dust accumulation). Clean panel periodically maintaining efficiency. Q: How much power will this panel actually generate in real-world conditions? A: Output depends on sunlight intensity, panel angle, temperature, and shading. Optimal conditions (bright sun, panel perpendicular to sun, cool temperature): 8-8.5A continuous. Real-world roof-mounted (horizontal, variable sun angle throughout day): 5-7A average midday, 2-4A morning/evening. Daily generation examples: clear summer day 8-10 hours sunlight = 48-60Ah, clear winter day 6-7 hours sunlight = 30-40Ah, cloudy day = 15-25Ah (30-50% reduction). Shading dramatically reduces output—keep panel clear of roof racks, antennas, and equipment casting shadows. Panel temperature coefficient: efficiency decreases ~0.5%/°C above 25°C—hot roof surface slightly reduces output but still generates substantial power. Dirty panel reduces output 10-30%—clean periodically especially after dusty travel maintaining efficiency. Track actual generation with charge controller display or battery monitor optimizing installation and identifying issues.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DTSB200 200W Foldable Solar Blanket - Monocrystalline Portable Solar Panel with PWM Charge Controller and Complete Wiring Kit for 4WD Camping, Caravan, and Off-Grid Battery Charging Power your off-grid adventures with Drivetech 4x4 DTSB200 200W Foldable Solar Blanket—featuring high-output 200W monocrystalline solar panel delivering up to 11.53A short circuit current for rapid auxiliary battery charging at campsite, portable foldable design packing from large 1110mm × 1105mm deployed size to compact 530mm × 385mm × 105mm folded dimensions for easy storage and transport, included PWM solar charge controller with complete wiring kit regulating charging voltage preventing battery overcharge and providing safe automatic charging for 12V and 24V battery systems, monocrystalline solar cells providing superior sunlight absorption and higher power output compared to traditional polycrystalline panels maximizing energy generation in limited space, durable lightweight construction crafted for camping and 4WD off-roading withstanding harsh outdoor environments and rough handling, 22.1V open circuit voltage suitable for charging 12V lead-acid, AGM, gel, and lithium batteries through PWM regulation, ultra-thin 5mm thickness when deployed creating minimal storage volume when folded, quick deployment design enabling setup in minutes without tools or complex installation, integrated carry handle and protective storage case simplifying transport and preventing panel damage during transit, suitable for camping trips recovering auxiliary battery capacity between driving days, caravan and camper trailer installations supplementing DC-DC charger with solar charging while stationary, boat applications providing marine power generation, and 4WD off-road adventures requiring portable high-output solar charging capability, eliminates generator noise and fuel costs providing silent renewable power generation, significantly faster charging than small rigid panels enabling meaningful daily battery recovery, weatherproof construction withstanding rain, dust, and harsh outdoor conditions, complete wiring kit with regulator enabling immediate installation and use, ideal for powering inverters, fridges, lights, and mobile devices during extended camping trips, monocrystalline technology delivering superior performance in both direct sunlight and partial cloud conditions, portable design enabling optimal panel positioning away from vehicle shade maximizing solar collection, rapid charging capability supporting high-consumption camping equipment and multiple simultaneous loads, Drivetech 4x4 Australian designed for outback touring and remote applications, 12-month warranty providing peace of mind for quality camping equipment investment, and providing essential portable high-output solar charging solution transforming off-grid camping capability. Product Overview Drivetech 4x4 DTSB200 200W Foldable Solar Blanket provides high-output portable solar charging transforming campsite battery management. 200W output with 11.53A short circuit current delivers substantial charging performance—significantly faster than typical 100-120W portable panels (5-6A output). Rapid charging enables meaningful daily battery recovery during multi-day camping trips without requiring vehicle engine running or generator operation. Example: typical 100Ah auxiliary battery depleted to 50% capacity (50Ah consumed) recovers approximately 40-50Ah during 6 hours optimal sunlight—nearly full recharge from single day solar charging enabling extended off-grid camping sustainability. Monocrystalline solar cell technology provides superior performance compared to polycrystalline alternatives. Monocrystalline cells offer higher efficiency (15-20% vs 13-16% polycrystalline), better low-light performance maintaining output during cloudy conditions and morning/evening reduced intensity, superior temperature coefficient maintaining efficiency during hot weather, and longer lifespan with slower degradation over decades. Monocrystalline construction maximizes power generation from limited panel area—critical for portable applications where size and weight constraints limit total panel capacity. Foldable design provides large 1110mm × 1105mm deployed area maximizing solar collection while packing to compact 530mm × 385mm × 105mm folded size. Significantly more portable than equivalent rigid panels (200W rigid panel typically 1600mm × 800mm × 35mm—awkward storage dimensions). Folded blanket stores under rear seat, in storage compartments, or stacked with camping gear without consuming excessive space. Ultra-thin 5mm deployed thickness creates minimal storage volume when folded—efficient packing for space-constrained vehicles. Included PWM Charge Controller: Complete wiring kit with PWM charge controller provides turnkey solar charging solution requiring only battery connection. Controller regulates panel output voltage matching battery chemistry and charge stage preventing overcharging damage. Automatic multi-stage charging progresses through bulk (maximum current), absorption (tapering current), and float (maintenance) stages optimizing battery health. Controller protects against reverse polarity connection, short circuit, and overload preventing equipment damage from wiring errors. Eliminates need for separate controller purchase—everything included for immediate solar charging capability. High-Output Charging Performance: 200W output delivers professional-grade charging performance adequate for recovering heavy daily consumption. Charging rate supports running fridge (3-4A continuous), LED lighting (2-3A evening), water pump (5A intermittent), USB devices (1-2A), inverter loads (variable)—total daily consumption 50-70Ah recovered during daylight hours. Enables true off-grid camping sustainability without auxiliary charging from vehicle alternator—camp multiple consecutive days maintaining battery capacity through solar alone. Significantly more capable than 100-120W panels requiring alternator charging every 2-3 days supplementing inadequate solar capacity. Monocrystalline Efficiency Advantage: Monocrystalline cells extract maximum power from available sunlight. Superior low-light performance maintains useful output during cloudy conditions, indirect sunlight, and non-optimal sun angles where polycrystalline panels lose effectiveness. Temperature coefficient advantage maintains higher efficiency during hot weather—panel surface temperatures often exceed 60-70°C in direct sun, monocrystalline cells maintain better performance at elevated temperatures. Long-term reliability with slower degradation—monocrystalline panels typically retain 85-90% output after 25 years vs 80-85% for polycrystalline. Quality investment providing reliable long-term solar charging performance. Rapid Deployment and Storage: Quick-setup design enables full deployment in under 2 minutes without tools. Unfold blanket, position for optimal sun exposure, connect to battery system, verify charging operation—complete setup. Folding reverses process—disconnect, fold panels into compact bundle, secure with integrated straps, store in protective case. Significantly faster than rigid panel setup requiring frame assembly, cable connection, and angling adjustments. Time savings valuable during brief stops or overnight camping requiring quick setup and departure. Versatile Camping Applications: Ideal for multiple off-grid scenarios: weekend camping maintaining auxiliary battery during 2-3 day trips, extended touring providing continuous charging during multi-week adventures, caravan installations supplementing DC-DC charger while stationary at campgrounds, camper trailer power systems enabling off-grid camping without generator dependence, boat applications providing marine power generation for house batteries, 4WD off-road adventures requiring reliable power for communication equipment and recovery gear. Portable design enables optimal positioning away from vehicle shade maximizing solar collection regardless of campsite orientation. Complete Wiring Kit: Included wiring provides everything needed for battery connection. Connect controller to battery, connect panel to controller—solar charging operational. Professional-grade components ensuring reliable long-term operation. Clear installation instructions guiding setup process. No additional components required beyond panel, controller, wiring, and battery—complete solution in single package simplifying purchasing and ensuring component compatibility. Durable Construction: High-quality lightweight materials engineered for camping and 4WD off-roading. Withstands folding and unfolding cycles without cracking or delamination. Weatherproof construction resists rain, dew, and humid conditions—leave deployed overnight or during weather changes without damage. Impact-resistant materials surviving rough handling during transport and setup. Significantly more durable than budget panels prone to delamination and failure in harsh conditions. Professional-grade construction ensuring reliable performance throughout camping seasons. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for outback touring and remote applications. Components engineered for harsh Australian conditions—extreme heat, dust, and UV exposure. 12-month warranty providing peace of mind for camping equipment investment. Australian-based technical support assisting with setup and charging questions. Quality assurance for critical power generation equipment enabling extended off-grid adventures. Technical Specifications SKU DTSB200 Product Type Foldable Solar Blanket with PWM Controller Brand Drivetech 4x4 Maximum Power Output 200W Solar Cell Type Monocrystalline Open Circuit Voltage 22.1V Short Circuit Current 11.53A Charge Controller PWM (included with wiring kit) Deployed Dimensions 1110mm (L) × 1105mm (W) × 5mm (H) Folded Dimensions 530mm (L) × 385mm (W) × 105mm (H) Weight Lightweight portable design Construction High-quality durable materials Included Components PWM Regulator, Complete Wiring Kit Battery Compatibility 12V/24V Lead-Acid, AGM, Gel, Lithium Weather Resistance Weatherproof (rain and dust resistant) Warranty 12 months Applications 4WD Camping, Caravan, Camper Trailer, Boat, Off-Grid Power Ideal For Inverters, Fridges, Lights, Mobile Devices Frequently Asked Questions Q: What's the difference between monocrystalline and polycrystalline solar panels? A: Monocrystalline panels (like DTSB200) use single-crystal silicon cells offering higher efficiency (15-20%), better low-light performance, superior high-temperature performance, and longer lifespan compared to polycrystalline panels (13-16% efficiency). Monocrystalline advantages: more power from same panel area (200W monocrystalline panel smaller than 200W polycrystalline), maintains better output during cloudy conditions and hot weather, slower degradation over time retaining higher percentage of original output after 20-25 years. Polycrystalline advantages: typically lower initial cost but requiring larger panel area for same power output. For portable camping applications, monocrystalline superior choice—higher efficiency means more compact panel size and better performance in variable camping conditions (shade, clouds, non-optimal angles). Q: How long does it take to charge my auxiliary battery with this panel? A: Charging time depends on battery capacity, state of charge, and sunlight conditions. Example: 100Ah AGM battery depleted to 50% capacity (50Ah consumed) in optimal conditions (bright sun, panel perpendicular to sun) generates approximately 9-10A charging current during peak hours. Bulk charging phase at 9-10A recovers approximately 27-30Ah in 3 hours. Absorption phase tapers current recovering remaining 20-23Ah in 3-4 hours. Total charging time approximately 6-7 hours optimal sunlight. Real-world conditions (morning/afternoon reduced intensity, panel angle compromise) extend time to 7-9 hours. For daily camping operation: deplete battery 40-60% overnight (40-60Ah from 100Ah battery), recover during single day sunlight maintaining sustainable battery capacity indefinitely without alternator charging. Q: Can I use this to power my camping fridge directly or does it need a battery? A: Solar panel must connect to battery—never connect directly to fridge or equipment. Solar output varies continuously throughout day (zero at night, maximum at noon, variable during clouds)—direct connection causes equipment power cycling and potential damage. Battery provides stable power buffer: solar charges battery during day, battery powers fridge continuously 24/7. System operation: solar panel → charge controller → battery → fridge. Battery absorbs variable solar input and delivers consistent power output. Minimum recommended battery capacity: 50-75Ah for typical camping fridge (drawing 2-4A continuous with 30-40% duty cycle = 14-24Ah daily consumption). 200W panel maintains battery capacity recovering daily fridge consumption plus additional loads (lights, devices). Q: What happens on cloudy days or when there's no direct sunlight? A: Monocrystalline panels maintain partial output during cloudy conditions—significantly better low-light performance than polycrystalline panels. Cloudy day output typically 20-40% of full-sun output depending on cloud density—light clouds 40% (4-5A charging), heavy overcast 20% (2-3A charging). Reduced output slows charging but continues battery maintenance. During extended cloudy periods (multi-day rain), monitor battery voltage preventing excessive discharge—reduce consumption, run vehicle engine periodically charging through DC-DC charger, or use generator if available. Morning dew and panel orientation also affect output—position panel perpendicular to sun maximizing available light, wipe dew from surface before noon sun, keep panel clean from dust and dirt maintaining efficiency. Most camping trips experience mixed sun/cloud conditions—200W capacity provides adequate margin maintaining battery despite occasional poor weather days. Q: Is this panel suitable for permanent installation on my vehicle roof? A: No, foldable solar blanket designed specifically for portable deployment at campsite—not suitable for permanent roof mounting. Portable deployment advantages: position optimally facing sun (impossible with fixed roof mounting), remove from vehicle during urban driving (preventing theft and damage), store when not camping (not consuming roof space year-round). For permanent roof-mounted solar, consider Drivetech 4x4 semi-flexible panels (DT-SPF160-1 or other rigid panels) designed for permanent adhesive mounting. Foldable blanket optimized for camping flexibility: deploy at campsite in optimal sun location, angle toward sun throughout day, fold and store when departing. Most campers prefer portable panels for flexibility and theft prevention—permanently mounted panels advertise expensive equipment to opportunistic thieves in campgrounds and parking areas.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-SPF200-1 200W Semi-Flexible Solar Panel - Ultra-Thin ETFE Coated High-Output Panel with MC4 Connectors for Permanent Vehicle Roof, Caravan, Marine, and Curved Surface Solar Installations Maximize your vehicle solar charging with Drivetech 4x4 DT-SPF200-1 200W Semi-Flexible Solar Panel—featuring ultra-thin 3mm profile enabling mounting on curved surfaces including vehicle roofs, caravan roofs, boat decks, and RV tops impossible with rigid glass panels, high-efficiency 200W monocrystalline cells delivering up to 10.8A charging current for continuous high-output auxiliary battery charging while parked and driving, premium ETFE (Ethylene Tetrafluoroethylene) coating providing superior weather resistance, UV protection, and self-cleaning properties exceeding traditional glass panel durability, anti-crack film construction preventing cell damage from flexing and impact ensuring reliable long-term performance on mobile installations, lightweight flexible design conforming to curved roof profiles up to 30-degree bend radius, stainless steel mounting eyelets providing corrosion-resistant permanent installation points around panel perimeter, 90cm integrated cable with industry-standard MC4 quick-disconnect connectors simplifying connection to solar charge controller and battery system, maximum power voltage 18.5V and open circuit voltage 22.68V optimized for 12V battery charging through MPPT or PWM controllers, maximum power current 10.8A providing substantial continuous charging maintaining auxiliary battery capacity without engine operation, short circuit current 11.2A with proper controller protection, large 1520mm × 680mm panel area maximizing solar collection in limited roof space, ultra-thin 3mm thickness creating minimal aerodynamic profile reducing wind resistance and noise compared to thick rigid panels, suitable for permanent installation on 4WD vehicle roofs providing automatic charging during parking and travel, caravan and motorhome roof mounting supplementing shore power and generator with renewable solar charging, boat deck installation providing reliable marine power generation, camper trailer roof mounting enabling off-grid camping without generator dependence, and commercial vehicle installations maintaining auxiliary systems during layover periods, eliminates daily panel deployment required with portable panels providing set-and-forget automatic charging, higher 200W output ideal for larger 100Ah+ battery systems and high-consumption applications, ETFE coating resists scratching, environmental contamination, and degradation maintaining efficiency over years of outdoor exposure, flexible construction withstands vehicle vibration, roof flex, and impact from branches and debris impossible with brittle glass panels, stainless steel eyelets resist saltwater corrosion in marine applications, MC4 connectors enable professional weatherproof wiring connection to charge controller (sold separately), requires MPPT or PWM solar charge controller for battery connection preventing overcharge damage, panel generates power during all daylight hours automatically maintaining auxiliary battery eliminating alternator charging dependency, ideal for vehicles with large auxiliary battery systems requiring continuous high-output charging during extended parking periods, Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments, 12-month or 20,000km warranty covering manufacturing defects, and providing essential high-output permanent solar charging solution for vehicle-based power independence. Product Overview Drivetech 4x4 DT-SPF200-1 200W Semi-Flexible Solar Panel provides high-output permanent roof-mounted solar charging transforming auxiliary battery management for large battery systems and high-consumption applications. 200W output with 10.8A maximum power current significantly exceeds 160W panels (8.65A) delivering 25% more charging capacity—critical advantage for larger 100-150Ah battery banks and high-consumption setups running multiple fridges, inverters, and equipment simultaneously. Permanent installation eliminates daily portable panel deployment—solar panel automatically generates power whenever daylight present maintaining auxiliary battery capacity during parking, camping, and driving. Ultra-thin 3mm profile enables mounting on curved surfaces impossible with rigid glass panels (typically 35-50mm thick). Flexible construction conforms to vehicle roof curves, caravan aerodynamic profiles, and boat deck contours maintaining contact across entire panel area. Bend radius up to 30 degrees accommodates moderate roof curvature—flat to gently curved surfaces. Significantly more versatile than rigid panels requiring perfectly flat mounting surface with complex brackets. Flexible installation follows roof profile creating low-profile aerodynamic installation minimizing wind resistance and noise. Premium ETFE coating provides superior weather protection exceeding traditional glass panel durability. ETFE (Ethylene Tetrafluoroethylene) fluoropolymer offers exceptional UV resistance—maintains transparency and efficiency over decades of sun exposure without yellowing or degradation. Self-cleaning properties prevent dirt and dust adhesion—rain naturally cleans surface maintaining efficiency without manual cleaning. Impact resistance prevents damage from hail, branches, and debris—flexible substrate absorbs impact energy instead of shattering like glass. Saltwater corrosion resistance ideal for marine installations—ETFE resists saltwater spray and coastal environmental exposure. High-Output 200W Performance: 10.8A maximum power current provides substantial continuous charging for larger auxiliary battery systems and high-consumption applications. Daily generation example: 6 hours quality sunlight generates 55-65Ah maintaining large battery capacity. Sufficient for offsetting significant camping consumption—dual fridges 6-8A continuous (36-48Ah daily combined), LED lighting extensive use (8-12Ah evening), water pump frequent use (2-4Ah), inverter loads (10-20Ah for laptops, tools, appliances), USB devices (3-4Ah). Total consumption 59-88Ah daily—200W panel output maintains battery capacity enabling comprehensive off-grid camping without alternator charging dependency. Ideal for full-time travelers, work-from-vehicle setups, and comprehensive touring rigs. Permanent Installation Advantages: Roof-mounted solar eliminates portable panel deployment chores. Arrive at campsite—solar already working, no setup required. Leave campsite—solar secured on roof, no packing required. Panel generates power during driving and parking automatically maintaining battery. Particularly valuable for: full-time travelers requiring continuous high-output charging, urban parking between trips maintaining large battery banks, work vehicles requiring substantial auxiliary system power during equipment operation, boats moored at marina maintaining house battery without shore power connection, commercial vehicles with refrigeration or equipment requiring continuous power. 200W vs 160W Panel Comparison: 200W panel delivers 25% more power (10.8A vs 8.65A maximum current) from 22% larger panel area (1520×680mm vs 1245×670mm). Choose 200W for: larger battery banks (100Ah+), high consumption exceeding 50Ah daily, dual fridge installations, inverter-dependent setups, full-time living requiring comprehensive power, limited roof space requiring maximum output from single panel. Choose 160W for: moderate battery systems (75-100Ah), consumption 30-50Ah daily, single fridge installations, weekend/occasional camping, vehicles with limited roof space, budget-conscious installations. Both panels share identical construction quality—decision based on power requirements and available mounting space. ETFE vs Glass Panel Comparison: ETFE flexible panels advantages—lightweight (50% lighter than glass), impact resistant (no shattering), conforms to curves, thinner profile, withstands flexing. Glass rigid panels advantages—slightly higher efficiency (1-2%), lower cost, proven long-term performance (20+ years documented). For mobile applications (vehicles, caravans, boats), flexible panels superior due to weight savings, impact resistance, and curved surface mounting. For fixed ground installations, rigid glass panels cost-effective. Vehicle roof installations benefit significantly from flexible panel advantages—particularly 200W output eliminating need for multiple panels. Stainless Steel Eyelet Mounting: Eyelets around panel perimeter provide multiple mounting points enabling secure attachment to various roof profiles. Typical installation: marine-grade VHB adhesive tape bonding panel to clean roof surface, supplemental eyelet fasteners through roof (with proper sealing) for high-security mounting, or combination approach (adhesive primary, eyelets backup). Stainless steel resists corrosion from weather exposure and saltwater spray. Mounting flexibility accommodates different roof materials—painted metal, fiberglass, aluminum, composite—with appropriate adhesives and fasteners. Larger 200W panel requires additional mounting points preventing center sag and wind uplift. MC4 Connector Integration: Industry-standard MC4 connectors simplify professional solar installation wiring. MC4 connectors weatherproof, secure, and tool-free connection/disconnection (with proper MC4 tools). Connect panel MC4 output to solar charge controller MC4 input, controller output to battery. MC4 system enables series/parallel panel connections for multi-panel installations—series connection increases voltage (2× 200W = 37V, suitable for MPPT controllers), parallel connection increases current (2× 200W = 21.6A). MC4 compatibility ensures professional installation standards and future expandability. High-output 200W panels often paired with second panel creating 400W roof arrays for comprehensive power requirements. Requires Separate Charge Controller: Panel does not include charge controller—designed for permanent installations with separate MPPT or PWM controller. MPPT controller strongly recommended for 200W panel maximizing efficiency (15-30% more power extraction than PWM). Controller prevents overcharging, regulates charging voltage, and prevents reverse discharge at night. Never connect panel directly to battery—22.68V open circuit voltage exceeds safe battery charging voltage causing damage. High-output 200W panel benefits significantly from MPPT technology extracting maximum power during variable light conditions. Minimum 20A controller required (10.8A panel output plus safety margin), 30A controller recommended enabling future expansion to dual-panel 400W array. Professional Installation Recommended: Roof-mounted solar installation requires: roof penetration sealing (if fastening through roof), proper adhesive selection for large panel, cable routing through vehicle/boat, charge controller installation and wiring, waterproofing and strain relief. Professional installers ensure watertight installation preventing leaks and corrosion. Competent DIY installers achieve successful results with careful planning, proper materials, and attention to waterproofing details. Critical: test installation with water hose before finalizing—identify leaks early preventing interior damage. Larger 200W panel requires careful positioning and secure mounting preventing wind uplift during highway driving. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments. Components engineered for mobile installation vibration and environmental exposure. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with installation planning and technical questions. Quality assurance for critical permanent installations. Technical Specifications SKU DT-SPF200-1 Product Type Semi-Flexible Solar Panel Brand Drivetech 4x4 Maximum Power Output 200W Maximum Power Voltage 18.5V Maximum Power Current 10.8A Open Circuit Voltage 22.68V Short Circuit Current 11.2A Panel Construction ETFE coating with anti-crack film Cell Type Monocrystalline Panel Dimensions 1520mm (L) × 680mm (W) × 3mm (H) Panel Thickness 3mm (ultra-thin) Bend Radius Up to 30 degrees Mounting Stainless steel eyelets (adhesive + fasteners) Cable Length 90cm (4mm²) Connector Type MC4 (industry standard) Weight Lightweight flexible design Charge Controller Not included (MPPT strongly recommended) Weather Resistance ETFE coating (UV resistant, waterproof) Ideal Battery Size 100-150Ah auxiliary batteries Warranty 12 months or 20,000km Applications Vehicle Roof, Caravan Roof, Boat Deck, RV, Curved Surface Installations Installation Type Permanent mounting (adhesive and/or fasteners) Frequently Asked Questions Q: How much more power does the 200W panel generate compared to the 160W panel? A: 200W panel generates approximately 25% more power—10.8A maximum current vs 8.65A for 160W panel. Real-world daily generation: 200W generates 55-65Ah optimal conditions (6 hours quality sun) vs 45-52Ah for 160W panel—difference of 10-13Ah daily. Significant advantage for high-consumption applications: dual fridges consuming 40-50Ah daily, inverter loads for laptops and tools, extensive lighting and device charging. Larger panel dimensions (1520×680mm vs 1245×670mm) require more roof space—verify available mounting area before ordering. Calculate consumption requirements determining adequate panel size: consumption under 45Ah daily—160W adequate, consumption 45-65Ah daily—200W appropriate, consumption exceeding 65Ah daily—consider dual 200W panels (400W total) or supplemental DC-DC charging. Q: Will this panel fit on my vehicle roof? A: Panel dimensions 1520mm × 680mm require approximately 1.6m × 0.7m clear roof space plus margin for mounting and cable routing. Typical fitment: most full-size 4WDs, wagons, SUVs with roof racks accommodate 200W panel, dual-cab utes with canopies accommodate panel on canopy roof, caravans and motorhomes easily accommodate 200W panel with space for additional panels. Compact vehicles, small SUVs, and vehicles with extensive roof equipment (roof racks, awnings, roof tents) may have inadequate space—measure carefully before purchasing. Consider roof obstructions: antennas, vents, air conditioners, solar fans, roof hatches—position panel avoiding shade from obstructions maximizing output. Professional installers assist with optimal positioning balancing available space, shade avoidance, and cable routing convenience. Q: What charge controller should I use with this 200W panel? A: MPPT (Maximum Power Point Tracking) controller strongly recommended for 200W panel extracting maximum power. Recommended controllers: 20-30A MPPT (Victron SmartSolar 100/20, Redarc BCDC1225D with solar input, CTEK D250SE) providing adequate capacity for single 200W panel with expansion capability. MPPT advantages for 200W: 15-30% efficiency gain over PWM (additional 2-3A output), superior low-light performance, handles higher input voltage enabling future series panel additions. Minimum controller specifications: 20A output capacity (10.8A panel plus safety margin), 12V/24V auto-detect, MPPT technology, MC4 input connectors. Budget alternative: 20A PWM controller adequate but sacrifices 15-30% potential output—PWM acceptable for basic installations, MPPT investment justified for 200W high-output applications maximizing panel investment. Q: Can I install two 200W panels together for 400W total? A: Yes, dual 200W panel installation creates 400W roof array generating 110-130Ah daily—sufficient for comprehensive off-grid living with extensive power consumption. Installation configurations: parallel connection (both panels 18.5V, combined 21.6A current) using MC4 Y-branch parallel connectors, series connection (combined 37V, 10.8A current) for MPPT controllers supporting higher voltage input. Parallel connection simpler requiring 30-40A MPPT controller handling combined current. Roof space requirements: 1.6m × 1.4m approximately for two panels side-by-side, or 3.2m × 0.7m for panels end-to-end. Professional installation highly recommended for dual-panel arrays ensuring proper wiring, secure mounting, balanced load distribution, and optimized positioning. Dual 200W arrays support: dual fridges, inverter-dependent work-from-vehicle setups, full-time living, comprehensive electronics and appliances, eliminating alternator and generator charging dependency. Q: How do I maintain and clean the panel to maximize efficiency? A: ETFE coating resists dirt adhesion but periodic cleaning maintains maximum efficiency. Cleaning procedure: rinse panel with fresh water removing loose dust and dirt, wash with mild soap solution and soft cloth/sponge (avoid abrasive materials scratching ETFE surface), rinse thoroughly removing soap residue, squeegee or air-dry preventing water spots. Cleaning frequency: monthly for dusty/dirty environments (outback touring, work sites), quarterly for normal conditions, after extended rain/dust storms. Morning dew naturally cleans surface—ETFE self-cleaning properties reduce manual cleaning requirements compared to glass panels. Inspect panel during cleaning: check adhesive bond integrity, verify mounting fastener tightness, inspect cable and MC4 connections for damage or corrosion, verify no shade obstructions from new roof equipment. Efficiency loss indicators: charging current significantly below expected (verify with battery monitor), dirty/contaminated surface visible, bird droppings or tree sap accumulation. Clean panel maintains 95-100% rated output, dirty panel drops to 70-85% output.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-SB250-1 250W Foldable Solar Blanket Kit - Premium Portable Solar Panel with MPPT 20A Charge Controller, Anderson Connectors, and Complete Wiring Kit for High-Output 4WD Camping, Caravan, and Off-Grid Battery Charging Maximize your off-grid power generation with Drivetech 4x4 DT-SB250-1 250W Foldable Solar Blanket Kit—featuring premium 250W monocrystalline solar panel delivering up to 12.19A charging current for maximum-speed auxiliary battery charging at campsite, advanced MPPT 20A solar charge controller extracting 15-30% more power than PWM controllers through intelligent maximum power point tracking technology, portable foldable design packing from large 2500mm × 680mm deployed size to narrow 510mm × 680mm × 80mm folded dimensions for efficient storage and transport, complete professional-grade wiring kit with 5m heavy-duty 4mm² cable and Anderson-style quick-disconnect plugs enabling convenient setup and connection to auxiliary battery systems, additional 0.5m alligator clip adapter providing direct battery terminal connection without permanent wiring, durable Polish PET (polyethylene terephthalate) construction providing weather resistance, UV protection, and impact resistance for harsh outdoor environments, maximum power voltage 20.2V and open circuit voltage 24.5V optimized for 12V battery charging through advanced MPPT regulation, maximum power current 12.19A providing highest charging capacity in Drivetech 4x4 portable solar range recovering battery capacity rapidly during daylight hours, short circuit current 13.45A with controller protection preventing damage during wiring faults, slim 10mm thickness when deployed creating manageable storage volume when folded, integrated carry handle and protective storage case simplifying transport and preventing panel damage during transit, quick deployment design enabling setup in minutes without tools or complex installation, Anderson connector compatibility with common auxiliary battery systems and DC-DC chargers, MPPT 20A charge controller LCD display showing charging status, battery voltage, charging current, and system diagnostics with superior efficiency compared to PWM technology, automatic multi-stage charging algorithm (bulk, absorption, float) optimizing battery health and charging efficiency, suitable for high-consumption camping trips requiring rapid battery recovery, caravan installations with large battery banks and extensive power requirements, off-grid work-from-vehicle setups powering laptops and equipment, dual fridge installations consuming 40-60Ah daily, full-time touring requiring comprehensive renewable power generation, and professional applications demanding maximum portable solar performance, eliminates generator noise and fuel costs providing silent high-output renewable power generation, significantly faster charging than 200W and smaller panels enabling complete battery recovery within single optimal sunlight day, weatherproof construction withstanding rain, dust, and harsh outdoor conditions, MPPT technology maximizing power extraction during variable light conditions including clouds, morning/evening reduced intensity, and non-optimal panel angles, includes comprehensive user manual with setup instructions and MPPT controller operation guidance, ideal for 100-150Ah auxiliary battery systems and high-consumption applications exceeding 60Ah daily, Drivetech 4x4 Australian designed for extreme outback touring and professional remote applications, 12-month or 20,000km warranty covering manufacturing defects, and providing ultimate portable high-output solar charging solution for serious off-grid adventurers and full-time travelers. Product Overview Drivetech 4x4 DT-SB250-1 250W Foldable Solar Blanket Kit represents premium portable solar technology delivering maximum charging performance for demanding off-grid applications. 250W output with 12.19A maximum power current exceeds 200W panels (9-11A) by 20-35% providing fastest available portable solar charging—critical advantage for large battery banks, high consumption setups, and rapid recovery requirements. Charging capacity sufficient for comprehensive power needs—dual fridges, inverter loads, extensive lighting, communication equipment, and continuous device charging—without depleting auxiliary battery capacity. Advanced MPPT (Maximum Power Point Tracking) 20A charge controller delivers 15-30% more power extraction compared to PWM (Pulse Width Modulation) controllers included with lower-tier solar blankets. MPPT technology continuously tracks solar panel maximum power point adjusting voltage and current for optimal power transfer regardless of battery state of charge, temperature, or light conditions. Particularly effective during variable light conditions—morning/evening reduced intensity, partial clouds, non-optimal panel angles—where PWM loses significant efficiency. MPPT investment justified for 250W high-output applications maximizing panel performance and accelerating battery recovery. Unique 2500mm × 680mm deployed dimensions create long narrow panel configuration differing from square 200W blankets (1110×1105mm). Long narrow format advantages: easier positioning in linear spaces (alongside vehicles, on narrow ground strips), better wind resistance (lower profile), simplified cable routing (panel end aligns with vehicle connection point). Folded dimensions 510mm × 680mm × 80mm create narrow profile convenient for storage behind seats, in narrow storage compartments, or stacked vertically. Different fold configuration from 200W blankets—choose based on storage space geometry and deployment preferences. MPPT Technology Advantage: MPPT charge controller extracts maximum available power from solar panel under all conditions. MPPT operation: panel generates 20.2V at maximum power point, battery requires 14.4V charging voltage (typical AGM absorption), MPPT converts excess 5.8V into additional charging current rather than wasting as heat (PWM approach). Result: 15-30% more charging current reaching battery—250W panel with MPPT generates 12-14A charging current, same panel with PWM generates 10-11A. Daily difference: 250W MPPT generates 65-80Ah optimal conditions vs 55-65Ah with PWM—meaningful advantage for high-consumption applications requiring maximum daily generation. MPPT particularly valuable for 250W investment maximizing return on premium panel purchase. Maximum Charging Performance: 12.19A maximum power current delivers professional-grade charging rivaling small fixed installations. Charging rate adequate for recovering extensive daily consumption—dual fridges 6-8A continuous (36-48Ah daily combined), inverter loads for laptops, tools, appliances (15-25Ah), extensive LED lighting (10-15Ah evening), water pump frequent use (3-5Ah), USB devices and communication equipment (4-6Ah). Total daily consumption 68-99Ah—250W MPPT panel recovers 65-80Ah during optimal 6-hour sunlight maintaining battery capacity with minimal deficit covered by occasional DC-DC charging during driving. Enables true off-grid sustainability for comprehensive power requirements impossible with smaller panels. Ideal for High-Consumption Applications: 250W output sized perfectly for: dual fridge setups consuming 40-60Ah daily maintaining refrigeration and freezing simultaneously, full-time vehicle dwelling requiring continuous power for living systems, work-from-vehicle setups powering laptops, monitors, Starlink internet, and office equipment, professional photography/videography requiring battery charging for cameras and drones, communication-dependent applications (emergency services, field research, remote work) requiring reliable power, and comprehensive touring rigs with extensive auxiliary systems. Single 250W panel eliminates need for multiple smaller panels simplifying deployment and cable management. Complete Professional Wiring Kit: Included 5m 4mm² cable with Anderson-style plugs provides heavy-duty connection from panel to battery/controller. 5m length enables flexible panel positioning—place panel in optimal sun exposure (away from vehicle shade, angled toward sun) while maintaining connection to battery system. Anderson quick-disconnect plugs enable rapid setup and breakdown—connect panel arriving at campsite, disconnect when departing—no tools required. Additional 0.5m alligator clip adapter connects directly to battery terminals for installations without permanent Anderson connectors—immediate solar charging capability without wiring modifications. Professional-grade components ensuring reliable long-term operation. Polish PET Construction: Durable PET (polyethylene terephthalate) substrate provides weather resistance, UV protection, and impact resistance. Flexible construction withstands folding and unfolding cycles without cracking or delamination—rigid panels suffer glass breakage and frame damage during rough handling. PET surface resists scratching and cleaning—wipe with damp cloth removing dust and dirt maintaining efficiency. Weatherproof construction withstands rain, dew, and humid conditions—leave deployed overnight or during weather changes without damage. Significantly more durable than budget fabric-backed panels prone to delamination and water ingress. Professional-grade construction justifying premium 250W investment. Rapid Deployment and Storage: Quick-setup design enables full deployment in under 3 minutes without tools. Unfold long narrow panel, position for optimal sun exposure, connect Anderson plug to battery system, verify MPPT controller display showing charging—complete setup. Folding reverses process—disconnect Anderson plug, fold panels into narrow bundle, secure with integrated straps, store in protective case. Long narrow fold pattern differs from square 200W blankets—assess storage space determining preferred configuration. Most users appreciate narrow 510×680mm fold fitting behind seats and in narrow storage areas. MPPT Controller LCD Display: Advanced LCD display shows comprehensive charging information—battery voltage (monitoring state of charge), charging current (verifying panel output), daily amp-hours generated (tracking total daily production), charging stage (bulk/absorption/float), and fault codes (diagnosing issues). MPPT display provides significantly more information than basic PWM controllers enabling performance optimization and troubleshooting. Monitor daily generation comparing to specifications—consistently low output indicates shading problems, dirty panel, or equipment issues requiring attention. Multiple Battery Compatibility: MPPT controller supports 12V and 24V battery systems with automatic voltage detection. Charges lead-acid, AGM, gel, and lithium (LiFePO4) batteries with programmable charging profiles. Lithium compatibility particularly valuable for modern auxiliary battery systems—MPPT regulates voltage precisely matching lithium requirements (14.2-14.6V) preventing overcharge. AGM profile default for most camping applications—controller automatically progresses through optimal charging stages maximizing battery health and lifespan. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for extreme outback touring and professional applications. Components engineered for harsh Australian conditions—extreme heat, dust, and UV exposure. 12-month or 20,000km warranty providing peace of mind for premium equipment investment. Australian-based technical support assisting with setup, MPPT controller configuration, and performance optimization. Quality assurance for critical power generation equipment enabling extended off-grid adventures. Technical Specifications SKU DT-SB250-1 Product Type Foldable Solar Blanket with MPPT Controller Brand Drivetech 4x4 Maximum Power Output 250W Maximum Power Voltage 20.2V Maximum Power Current 12.19A Open Circuit Voltage 24.5V Short Circuit Current 13.45A Charge Controller MPPT 20A (included) Controller Compatibility 12V and 24V systems Panel Construction Polish PET (Polyethylene Terephthalate) Deployed Dimensions 2500mm (L) × 680mm (W) × 10mm (H) Folded Dimensions 510mm (L) × 680mm (W) × 80mm (H) Cable Length 5m (4mm² with Anderson plugs) Alligator Clip Adapter 0.5m (2.5mm² to Anderson) Connector Type Anderson-style quick-disconnect Weight Lightweight portable design Battery Compatibility 12V/24V Lead-Acid, AGM, Gel, Lithium (LiFePO4) Weather Resistance Weatherproof (rain and dust resistant) Ideal Battery Size 100-150Ah auxiliary batteries Daily Generation 65-80Ah (optimal 6-hour sunlight with MPPT) Warranty 12 months or 20,000km Applications High-Consumption 4WD Camping, Full-Time Touring, Dual Fridges, Work-from-Vehicle, Professional Applications Frequently Asked Questions Q: What's the advantage of MPPT controller over PWM controller in other solar blankets? A: MPPT (Maximum Power Point Tracking) extracts 15-30% more power from solar panel compared to PWM (Pulse Width Modulation) technology. MPPT continuously adjusts panel operating voltage tracking maximum power point regardless of battery voltage, light conditions, or temperature. PWM simply switches panel voltage on/off matching battery voltage—works adequately in ideal conditions but loses efficiency during variable light (clouds, morning/evening, non-optimal angles). For 250W panel: MPPT generates 12-14A charging current extracting full panel capacity, PWM generates 10-11A wasting 2-3A potential output. Daily difference significant: MPPT 65-80Ah generation vs PWM 55-65Ah—additional 10-15Ah daily justifies MPPT investment for premium 250W panel. MPPT particularly valuable for serious off-grid applications requiring maximum power extraction from limited solar capacity. Q: How long does it take to fully charge a 100Ah auxiliary battery with this panel? A: Charging time depends on battery state of charge and sunlight conditions. Example: 100Ah AGM battery depleted to 50% capacity (50Ah consumed) in optimal conditions with MPPT controller generates 11-12A charging current during peak hours. Bulk charging phase at 11-12A recovers approximately 33-36Ah in 3 hours. Absorption phase tapers current recovering remaining 14-17Ah in 2-3 hours. Total charging time approximately 5-6 hours optimal sunlight—significantly faster than 200W panels (6-7 hours) and dramatically faster than 120W panels (8-10 hours). Real-world conditions extend time to 6-8 hours. For daily camping operation with high consumption: deplete battery 60-75% overnight (60-75Ah from 100Ah battery), recover completely during single optimal sunlight day maintaining sustainable indefinite off-grid operation without alternator charging. Q: Is this panel suitable for full-time vehicle dwelling and work-from-vehicle setups? A: Yes, 250W MPPT represents optimal portable solar solution for full-time living and work-from-vehicle applications. Output adequate for comprehensive power requirements: dual fridges maintaining refrigeration and freezing (40-50Ah daily), laptop and monitor for remote work (15-20Ah daily 8-hour workday), Starlink or mobile internet (10-15Ah daily), extensive lighting and USB devices (8-12Ah evening), water pump and auxiliary systems (5-8Ah). Total consumption 78-105Ah daily—250W MPPT generates 65-80Ah optimal conditions with 15-40Ah deficit covered by occasional DC-DC charging during driving or driving every 2-3 days supplementing solar. Most full-time travelers find 250W portable plus 160-200W fixed roof panel provides comprehensive power independence. 250W portable deployed optimally at campsite, fixed roof panel generates during driving and parking—combined approach provides 400-450W total capacity supporting full-time living requirements. Q: How does the long narrow fold compare to square 200W blanket fold? A: 250W blanket folds to 510mm × 680mm × 80mm (long narrow profile) vs 200W blanket 530mm × 385mm × 105mm (more square profile). Long narrow fold advantages: fits behind seats in narrow gap between seat back and cargo area, stores vertically in narrow spaces, matches shape of roof rack bags and storage containers. Square fold advantages: more compact footprint (530×385mm vs 510×680mm), easier to stack with other camping gear, fits underseat storage in some vehicles. Choose based on storage space geometry: narrow vertical spaces prefer 250W fold, wide shallow spaces prefer 200W fold. Deployed dimensions also differ: 250W deploys 2500×680mm (long narrow) suitable for positioning alongside vehicles or in linear spaces, 200W deploys 1110×1105mm (square) suitable for open ground areas. Both effective—selection based on storage and deployment preferences matching individual camping setup. Q: Can I upgrade from PWM to MPPT controller with my existing solar blanket? A: Yes, MPPT controller upgrades significantly improve existing solar blanket performance. Any solar panel benefits from MPPT technology—120W PWM blanket upgraded to MPPT controller generates 15-30% more power (6.5-7.5A vs 5.97A), 200W PWM blanket upgraded generates 11-13A vs 9-10A. Purchase standalone MPPT controller (20-30A capacity, MC4 or Anderson connections) connecting between existing panel and battery—disconnect PWM controller, install MPPT controller, reconnect panel and battery. MPPT upgrade cost typically $150-300 depending on controller brand—Victron, Redarc, CTEK popular choices. Upgrade justified for: existing panels used extensively (frequent camping justifying investment), high-consumption applications requiring maximum output, users noticing inadequate charging with PWM particularly during variable light conditions. Alternatively, purchase new 250W MPPT blanket (DT-SB250-1) gaining both higher panel output and MPPT efficiency—more expensive but maximum performance solution. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-SPF80-1 80W Semi-Flexible Solar Panel - Compact Ultra-Thin ETFE Coated Panel with MC4 Connectors for Small Vehicle Roof, Motorcycle, Compact Caravan, and Space-Limited Curved Surface Solar Installations Add permanent solar charging to compact vehicles with Drivetech 4x4 DT-SPF80-1 80W Semi-Flexible Solar Panel—featuring ultra-thin 3mm profile enabling mounting on curved surfaces including small vehicle roofs, compact caravan roofs, motorcycle trailers, boat decks, and space-limited installations impossible with rigid glass panels, efficient 80W monocrystalline cells delivering up to 4.38A charging current for continuous auxiliary battery charging while parked and driving, premium ETFE (Ethylene Tetrafluoroethylene) coating providing superior weather resistance, UV protection, and self-cleaning properties exceeding traditional glass panel durability, anti-crack film construction preventing cell damage from flexing and impact ensuring reliable long-term performance on mobile installations, lightweight flexible design conforming to curved roof profiles up to 30-degree bend radius, stainless steel mounting eyelets providing corrosion-resistant permanent installation points around panel perimeter, 90cm integrated cable with industry-standard MC4 quick-disconnect connectors simplifying connection to solar charge controller and battery system, maximum power voltage 18.5V and open circuit voltage 21.5V optimized for 12V battery charging through MPPT or PWM controllers, maximum power current 4.38A providing reliable continuous charging maintaining smaller auxiliary battery capacity without engine operation, short circuit current 4.87A with proper controller protection, compact 845mm × 690mm panel area maximizing solar collection in limited roof space on smaller vehicles, ultra-thin 3mm thickness creating minimal aerodynamic profile reducing wind resistance and noise compared to thick rigid panels, suitable for permanent installation on compact 4WD vehicle roofs, small wagons, motorcycles with trailers, compact caravans and camper trailers, small boats and tenders, and any space-limited installation requiring quality permanent solar charging, eliminates daily panel deployment required with portable panels providing set-and-forget automatic charging, ideal for smaller 50-75Ah battery systems and moderate consumption applications consuming 25-35Ah daily, ETFE coating resists scratching, environmental contamination, and degradation maintaining efficiency over years of outdoor exposure, flexible construction withstands vehicle vibration, roof flex, and impact from branches and debris impossible with brittle glass panels, stainless steel eyelets resist saltwater corrosion in marine applications, MC4 connectors enable professional weatherproof wiring connection to charge controller (sold separately), requires MPPT or PWM solar charge controller for battery connection preventing overcharge damage, panel generates power during all daylight hours automatically maintaining auxiliary battery eliminating alternator charging dependency, perfect for budget-conscious installations requiring quality permanent solar without oversized capacity investment, enables multi-panel installations with multiple 80W panels creating scalable solar arrays matching growing power requirements, compact dimensions fit tight roof spaces on small vehicles impossible for larger 160-200W panels, Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments, 12-month or 20,000km warranty covering manufacturing defects, and providing essential compact permanent solar charging solution for small vehicles and space-limited installations. Product Overview Drivetech 4x4 DT-SPF80-1 80W Semi-Flexible Solar Panel provides permanent roof-mounted solar charging optimized for compact vehicles, smaller battery systems, and space-limited installations. 80W output with 4.38A maximum power current perfectly sized for typical 50-75Ah auxiliary battery systems and moderate consumption applications—single fridge consuming 18-28Ah daily, LED lighting (4-8Ah evening), water pump occasional use (1-2Ah), USB devices (2-3Ah). Total typical consumption 25-41Ah daily—80W panel generates 24-30Ah during optimal 6-hour sunlight maintaining battery capacity during weekend and extended camping trips. Right-sized solution avoiding over-investment in excess solar capacity for typical recreational camping requirements. Compact 845mm × 690mm dimensions enable installation on vehicles where larger 160-200W panels physically impossible. Perfect for: compact SUVs with limited roof space, small wagons and hatchbacks, dual-cab utes with canopy roofs, pop-top caravans with limited mounting area, motorcycles with camping trailers, small tinnies and tenders, camper trailers with compact roofs. Multiple 80W panels accommodate varied roof configurations—install two 80W panels (160W total) on roofs too narrow for single 200W panel, install in gaps between roof racks and equipment, configure around roof vents and hatches impossible with large rigid panels. Premium ETFE coating provides identical weather protection to larger semi-flexible panels. ETFE (Ethylene Tetrafluoroethylene) fluoropolymer offers exceptional UV resistance—maintains transparency and efficiency over decades of sun exposure without yellowing or degradation. Self-cleaning properties prevent dirt and dust adhesion—rain naturally cleans surface maintaining efficiency without manual cleaning. Impact resistance prevents damage from hail, branches, and debris—flexible substrate absorbs impact energy instead of shattering like glass. Saltwater corrosion resistance ideal for marine installations—ETFE resists saltwater spray and coastal environmental exposure. Compact panel receives same premium construction as larger models ensuring quality investment regardless of size. Ideal for 50-75Ah Battery Systems: 80W output perfectly matched to smaller auxiliary battery installations common in recreational camping and weekend touring. 4.38A charging current provides approximately 24-30Ah daily recovery during optimal sunlight conditions—adequate for typical camping consumption without depleting battery. Larger 100Ah+ battery systems benefit from 160-200W panels' higher output, smaller 50-75Ah systems well-served by 80W panel's efficient charging without excess capacity. Budget-friendly entry to permanent solar charging avoiding oversized panel investment for moderate power requirements. Start with single 80W panel, add second panel later if consumption increases—modular approach matching solar capacity to actual requirements. Compact Installation Advantages: Small 845×690mm dimensions fit tight spaces impossible for larger panels. Typical applications: compact SUV roofs with roof racks leaving 900×700mm clear space, pop-top caravan roofs with limited area between pop-top mechanism and front/rear, motorcycle trailer roofs requiring low-profile lightweight installation, small boat decks with limited mounting area, camper trailer roofs between roof vents and edges. Enables permanent solar on vehicles previously requiring portable panels due to roof space constraints. Lightweight construction minimizes added weight on small vehicles and trailers sensitive to weight increases affecting handling and fuel economy. Multi-Panel Scalability: Multiple 80W panels create scalable solar arrays matching growing power requirements. Two 80W panels parallel-connected (160W total, 8.76A combined) adequate for larger batteries and higher consumption. Three 80W panels (240W total, 13.14A combined) approach 250W blanket performance in permanent installation. Four 80W panels (320W total) provide comprehensive power for extensive auxiliary systems. Advantages over single large panel: flexible positioning on complex roofs, distributed weight reducing stress on single mounting point, redundancy if one panel damaged or shaded, scalable investment growing with power requirements. Professional installers configure multi-panel arrays optimizing roof space utilization and cable management. Permanent Installation Advantages: Roof-mounted solar eliminates portable panel deployment chores. Arrive at campsite—solar already working, no setup required. Leave campsite—solar secured on roof, no packing required. Panel generates power during driving and parking automatically maintaining battery. Particularly valuable for: weekend warriors requiring simple camping power without daily setup routines, compact vehicles lacking storage space for portable panels, theft-prone camping locations where permanent installation secured and less visible than portable panels, users prioritizing convenience over maximum power generation flexibility. ETFE vs Glass Panel Comparison: ETFE flexible panels advantages—lightweight (50% lighter than glass), impact resistant (no shattering), conforms to curves, thinner profile, withstands flexing. Glass rigid panels advantages—slightly higher efficiency (1-2%), lower cost per watt, proven long-term performance (20+ years documented). For compact mobile applications (small vehicles, motorcycles, compact caravans, small boats), flexible panels superior due to weight savings, impact resistance, curved surface mounting, and space efficiency. 80W semi-flexible panel perfect for applications where weight and size constraints critical. Stainless Steel Eyelet Mounting: Eyelets around panel perimeter provide multiple mounting points enabling secure attachment to various roof profiles. Typical installation: marine-grade VHB adhesive tape bonding panel to clean roof surface, optional eyelet fasteners through roof (with proper sealing) for high-security mounting, or combination approach (adhesive primary, eyelets backup). Stainless steel resists corrosion from weather exposure and saltwater spray. Mounting flexibility accommodates different roof materials—painted metal, fiberglass, aluminum, composite—with appropriate adhesives and fasteners. Smaller panel requires fewer mounting points simplifying installation and reducing roof penetration concerns. MC4 Connector Integration: Industry-standard MC4 connectors simplify professional solar installation wiring. MC4 connectors weatherproof, secure, and tool-free connection/disconnection (with proper MC4 tools). Connect panel MC4 output to solar charge controller MC4 input, controller output to battery. MC4 system enables series/parallel panel connections for multi-panel installations—parallel connection increases current (2× 80W = 8.76A), series connection increases voltage (2× 80W = 37V, suitable for MPPT controllers). MC4 compatibility ensures professional installation standards and future expandability adding panels as requirements grow. Requires Separate Charge Controller: Panel does not include charge controller—designed for permanent installations with separate MPPT or PWM controller. PWM controller economical for single 80W panel (10A PWM adequate), MPPT controller recommended for multi-panel arrays or maximum efficiency applications. Controller prevents overcharging, regulates charging voltage, and prevents reverse discharge at night. Never connect panel directly to battery—21.5V open circuit voltage exceeds safe battery charging voltage causing damage. Single 80W panel PWM controller acceptable cost-effective solution, multiple 80W panels benefit from MPPT technology maximizing combined output. Professional Installation Recommended: Roof-mounted solar installation requires: roof penetration sealing (if fastening through roof), proper adhesive selection, cable routing through vehicle/boat, charge controller installation and wiring, waterproofing and strain relief. Professional installers ensure watertight installation preventing leaks and corrosion. Competent DIY installers achieve successful results with careful planning, proper materials, and attention to waterproofing details. Critical: test installation with water hose before finalizing—identify leaks early preventing interior damage. Smaller 80W panel simplifies DIY installation compared to large heavy panels requiring additional handling precautions. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments. Components engineered for mobile installation vibration and environmental exposure. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with installation planning and technical questions. Quality assurance for critical permanent installations regardless of panel size—80W panel receives identical construction quality as premium 200W models. Technical Specifications SKU DT-SPF80-1 Product Type Semi-Flexible Solar Panel Brand Drivetech 4x4 Maximum Power Output 80W Maximum Power Voltage 18.5V Maximum Power Current 4.38A Open Circuit Voltage 21.5V Short Circuit Current 4.87A Panel Construction ETFE coating with anti-crack film Cell Type Monocrystalline Panel Dimensions 845mm (L) × 690mm (W) × 3mm (H) Panel Thickness 3mm (ultra-thin) Bend Radius Up to 30 degrees Mounting Stainless steel eyelets (adhesive + fasteners) Cable Length 90cm (4mm²) Connector Type MC4 (industry standard) Weight Lightweight compact design Charge Controller Not included (PWM or MPPT required) Weather Resistance ETFE coating (UV resistant, waterproof) Ideal Battery Size 50-75Ah auxiliary batteries Daily Generation 24-30Ah (optimal 6-hour sunlight) Warranty 12 months or 20,000km Applications Compact Vehicle Roof, Small Caravan, Motorcycle Trailer, Small Boat, Space-Limited Installations Installation Type Permanent mounting (adhesive and/or fasteners) Frequently Asked Questions Q: Is 80W enough solar power for my camping needs? A: 80W adequate for moderate consumption camping with single fridge and basic accessories. Calculate daily consumption: fridge 3A × 24 hours × 30-40% duty cycle = 18-24Ah, LED lighting 2A × 4 hours = 8Ah, water pump occasional = 1Ah, USB devices = 2-3Ah. Total 29-36Ah daily—80W panel generates 24-30Ah optimal conditions maintaining battery during weekend camping with occasional DC-DC charging during driving. Adequate for: weekend camping (Friday-Sunday), single fridge installations, 50-75Ah batteries, moderate consumption habits. Insufficient for: dual fridges, extensive inverter use, large 100Ah+ batteries, high consumption exceeding 40Ah daily. If consumption consistently exceeds 35Ah, consider 160W panel providing faster recovery and higher margin. If consumption below 30Ah, 80W provides excellent value without oversized capacity investment. Q: Can I install multiple 80W panels together for more power? A: Yes, multiple 80W panels create scalable solar array matching roof space and power requirements. Configuration examples: two 80W panels parallel (160W total, 8.76A combined) adequate for larger batteries and higher consumption, three 80W panels parallel (240W total, 13.14A combined) providing substantial charging capability, four 80W panels (320W total) comprehensive power for extensive systems. Parallel connection using MC4 Y-branch connectors combining current while maintaining 18.5V voltage. Requires charge controller sized for total current—two panels require 10-15A controller, three-four panels require 15-20A controller. Multi-panel approach advantages: flexible positioning on complex roofs, distributed weight, scalable investment. Example application: compact caravan with 900mm × 1400mm roof area—impossible for single 200W panel (1520×680mm) but perfect for two 80W panels side-by-side creating 160W array with optimal space utilization. Q: What size charge controller do I need for this 80W panel? A: Single 80W panel requires minimum 10A charge controller (4.38A panel output plus safety margin). Recommended controllers: 10A PWM (economical, adequate for single panel) or 10-20A MPPT (maximum efficiency, enables future expansion). PWM controller examples: basic 10A PWM solar controller ($50-100 typical), adequate for single 80W panel budget installation. MPPT controller examples: 10-15A MPPT units ($150-250), extract 15-30% more power worth investment for premium applications or multi-panel future expansion. For multiple panels: two 80W panels require 10-15A controller, three-four panels require 15-20A controller. MPPT strongly recommended for multi-panel arrays maximizing combined output. Ensure controller voltage rating accommodates panel voltage (21.5V open circuit requires controller rated minimum 25V input, typical controllers 50-100V adequate). Q: Will this panel fit on my compact SUV or small caravan roof? A: 845×690mm dimensions fit most compact vehicles and caravans. Typical fitment: compact SUVs with roof racks leaving 900×700mm clear space—perfect fit, small wagons with 1000×700mm roof area—adequate space with margin, pop-top caravans with limited roof area between pop-top mechanism—often suitable, motorcycle trailers with 1000×800mm roofs—excellent fit with space remaining, small boats with limited deck space—appropriate size for compact installations. Measure available roof space before ordering: length × width clear area, account for roof racks, vents, hatches, antennas, and other obstructions. Panel requires approximately 850×700mm minimum clear area plus margin for mounting and cable routing. Professional installers assist with measurements and positioning optimization. Q: Can I use this for marine applications on small boats? A: Yes, 80W semi-flexible panel ideal for small boat applications—tinnies, tenders, small sailboats, dinghies requiring compact reliable solar charging. ETFE coating resists saltwater spray and marine environmental exposure. Stainless steel eyelets prevent corrosion in harsh saltwater environment. Flexible construction withstands boat flex and impact from waves and docking. Compact size fits limited deck space on small boats where larger panels impractical. Marine installation considerations: position panel avoiding foot traffic and equipment storage areas, secure mounting preventing movement during rough water, cable routing through deck glands with proper waterproofing, charge controller installation in protected location (cabin, battery compartment) avoiding direct water exposure. 80W output adequate for maintaining house battery, running navigation lights, charging electronics, and powering bilge pump on small recreational boats. Insufficient for liveaboard vessels requiring comprehensive power—consider multiple 80W panels or larger 160-200W panels for extensive marine systems. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DT-SPF110-1 110W Semi-Flexible Solar Panel - Mid-Range Ultra-Thin ETFE Coated Panel with MC4 Connectors for Vehicle Roof, Standard Caravan, Marine, and Balanced Curved Surface Solar Installations Optimize your permanent solar charging with Drivetech 4x4 DT-SPF110-1 110W Semi-Flexible Solar Panel—featuring ultra-thin 3mm profile enabling mounting on curved surfaces including vehicle roofs, standard caravan roofs, boat decks, and RV tops impossible with rigid glass panels, balanced 110W monocrystalline cells delivering up to 5.45A charging current for continuous auxiliary battery charging while parked and driving, premium ETFE (Ethylene Tetrafluoroethylene) coating providing superior weather resistance, UV protection, and self-cleaning properties exceeding traditional glass panel durability, anti-crack film construction preventing cell damage from flexing and impact ensuring reliable long-term performance on mobile installations, lightweight flexible design conforming to curved roof profiles up to 30-degree bend radius, stainless steel mounting eyelets providing corrosion-resistant permanent installation points around panel perimeter, 90cm integrated cable with industry-standard MC4 quick-disconnect connectors simplifying connection to solar charge controller and battery system, maximum power voltage 20.16V and open circuit voltage 23.75V optimized for 12V battery charging through MPPT or PWM controllers, maximum power current 5.45A providing reliable continuous charging maintaining medium auxiliary battery capacity without engine operation, short circuit current 6.05A with proper controller protection, balanced 930mm × 670mm panel area maximizing solar collection without excessive roof space consumption, ultra-thin 3mm thickness creating minimal aerodynamic profile reducing wind resistance and noise compared to thick rigid panels, suitable for permanent installation on standard 4WD vehicle roofs, medium-sized wagons and SUVs, standard caravans and camper trailers, medium recreational boats, and applications requiring balanced power output without oversized panel dimensions, eliminates daily panel deployment required with portable panels providing set-and-forget automatic charging, ideal for 75-100Ah battery systems and moderate-to-high consumption applications consuming 30-45Ah daily, ETFE coating resists scratching, environmental contamination, and degradation maintaining efficiency over years of outdoor exposure, flexible construction withstands vehicle vibration, roof flex, and impact from branches and debris impossible with brittle glass panels, stainless steel eyelets resist saltwater corrosion in marine applications, MC4 connectors enable professional weatherproof wiring connection to charge controller (sold separately), requires MPPT or PWM solar charge controller for battery connection preventing overcharge damage, panel generates power during all daylight hours automatically maintaining auxiliary battery eliminating alternator charging dependency, perfect mid-range option between compact 80W entry-level and larger 160-200W high-output panels providing balanced capacity for typical touring requirements, enables practical two-panel configurations with dual 110W panels creating 220W arrays for comprehensive power needs, balanced dimensions fit standard roof spaces on mainstream vehicles without excessive overhang or clearance concerns, Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments, 12-month or 20,000km warranty covering manufacturing defects, and providing essential mid-range permanent solar charging solution for balanced power requirements and mainstream vehicle installations. Product Overview Drivetech 4x4 DT-SPF110-1 110W Semi-Flexible Solar Panel provides permanent roof-mounted solar charging optimized for mainstream vehicles, medium battery systems, and balanced power requirements. 110W output with 5.45A maximum power current represents sweet spot between compact 80W panels (4.38A) and larger 160W+ panels (8.65A+) delivering adequate charging capacity without excessive panel size or cost investment. Perfect for typical 75-100Ah auxiliary battery systems and moderate-to-high consumption applications—single fridge consuming 22-28Ah daily, LED lighting extensive use (6-10Ah evening), water pump regular use (2-3Ah), USB devices and electronics (3-5Ah). Total typical consumption 33-46Ah daily—110W panel generates 30-38Ah during optimal 6-hour sunlight maintaining battery capacity during extended camping trips with occasional DC-DC supplement during driving. Balanced 930mm × 670mm dimensions enable installation on mainstream vehicles where larger panels create fitment challenges while providing substantially more output than compact 80W panels. Perfect for: standard wagons and SUVs with typical roof space, medium caravans and camper trailers, dual-cab utes with standard canopy roofs, medium recreational boats, pop-top caravans with moderate mounting area. Single 110W panel fits most standard roof configurations, dual 110W panels (220W total) create comprehensive power system for higher consumption without requiring 200W+ panel dimensions. Balanced size-to-output ratio maximizing roof space efficiency. Premium ETFE coating provides identical weather protection to all semi-flexible panel range. ETFE (Ethylene Tetrafluoroethylene) fluoropolymer offers exceptional UV resistance—maintains transparency and efficiency over decades of sun exposure without yellowing or degradation. Self-cleaning properties prevent dirt and dust adhesion—rain naturally cleans surface maintaining efficiency without manual cleaning. Impact resistance prevents damage from hail, branches, and debris—flexible substrate absorbs impact energy instead of shattering like glass. Saltwater corrosion resistance ideal for marine installations—ETFE resists saltwater spray and coastal environmental exposure. Mid-range 110W panel receives same premium construction as larger models ensuring quality investment regardless of size selection. Ideal for 75-100Ah Battery Systems: 110W output perfectly matched to medium auxiliary battery installations common in touring and extended camping. 5.45A charging current provides approximately 30-38Ah daily recovery during optimal sunlight conditions—adequate for moderate-to-high camping consumption without depleting battery. Smaller 50-75Ah batteries adequately served by 80W panels, larger 100Ah+ batteries benefit from 160-200W panels' higher output, medium 75-100Ah systems optimally served by 110W panel's balanced charging without excess capacity. Budget-conscious permanent solar solution providing meaningful charging improvement over 80W without premium cost of 160W+ panels. Mid-Range Panel Advantages: 110W represents optimal balance for many users. Advantages over 80W: 25% more output (5.45A vs 4.38A) enabling higher consumption support and faster battery recovery, adequate for moderate fridge use plus accessories without constant DC-DC supplementation. Advantages over 160W: smaller dimensions (930×670mm vs 1245×670mm) fitting tighter roof spaces, lighter weight reducing roof load and structural requirements, lower cost reducing initial investment for adequate capacity. Choose 110W for: balanced power requirements between basic and comprehensive, standard vehicle roof spaces, budget-conscious quality installations, users wanting more than 80W without committing to 160W+ size and cost. Practical Two-Panel Configurations: Two 110W panels create 220W total output (10.9A combined) providing comprehensive charging capability approaching 250W blanket performance in permanent installation. Dual 110W advantages over single 200W: flexible positioning on complex roofs, distributed weight across two mounting points, redundancy if one panel damaged or shaded, fits roofs too narrow for single large panel. Example: caravan roof 1000mm × 1400mm accommodates two 110W panels side-by-side (1860mm × 670mm combined) impossible for single 200W panel (1520×680mm) requiring 1.5m+ clear length. Professional installers configure dual 110W arrays optimizing roof space utilization. Permanent Installation Advantages: Roof-mounted solar eliminates portable panel deployment chores. Arrive at campsite—solar already working, no setup required. Leave campsite—solar secured on roof, no packing required. Panel generates power during driving and parking automatically maintaining battery. Particularly valuable for: regular campers requiring consistent reliable power without daily setup routines, vehicles with limited cargo space for portable panels, security-conscious users preventing portable panel theft, users prioritizing convenience and automation over maximum power generation flexibility. Set-and-forget operation providing worry-free battery maintenance throughout camping seasons. ETFE vs Glass Panel Comparison: ETFE flexible panels advantages—lightweight (50% lighter than glass), impact resistant (no shattering), conforms to curves, thinner profile, withstands flexing. Glass rigid panels advantages—slightly higher efficiency (1-2%), lower cost per watt, proven long-term performance (20+ years documented). For mainstream mobile applications (standard vehicles, caravans, boats), flexible panels superior due to weight savings, impact resistance, curved surface mounting, and professional appearance. 110W semi-flexible panel delivers optimal balance for typical touring and camping applications where quality and reliability prioritized over absolute lowest cost. Stainless Steel Eyelet Mounting: Eyelets around panel perimeter provide multiple mounting points enabling secure attachment to various roof profiles. Typical installation: marine-grade VHB adhesive tape bonding panel to clean roof surface, optional eyelet fasteners through roof (with proper sealing) for high-security mounting, or combination approach (adhesive primary, eyelets backup). Stainless steel resists corrosion from weather exposure and saltwater spray. Mounting flexibility accommodates different roof materials—painted metal, fiberglass, aluminum, composite—with appropriate adhesives and fasteners. Medium 110W panel requires balanced mounting point distribution preventing center sag while avoiding excessive roof penetrations. MC4 Connector Integration: Industry-standard MC4 connectors simplify professional solar installation wiring. MC4 connectors weatherproof, secure, and tool-free connection/disconnection (with proper MC4 tools). Connect panel MC4 output to solar charge controller MC4 input, controller output to battery. MC4 system enables series/parallel panel connections for multi-panel installations—parallel connection increases current (2× 110W = 10.9A), series connection increases voltage (2× 110W = 40.32V, suitable for MPPT controllers). MC4 compatibility ensures professional installation standards and future expandability adding panels as requirements grow. Requires Separate Charge Controller: Panel does not include charge controller—designed for permanent installations with separate MPPT or PWM controller. PWM controller economical for single 110W panel (10A PWM adequate), MPPT controller recommended for maximum efficiency or multi-panel arrays. Controller prevents overcharging, regulates charging voltage, and prevents reverse discharge at night. Never connect panel directly to battery—23.75V open circuit voltage exceeds safe battery charging voltage causing damage. Single 110W panel accepts PWM or MPPT—PWM cost-effective budget option, MPPT extracts 15-30% additional power justifying investment for premium applications. Professional Installation Recommended: Roof-mounted solar installation requires: roof penetration sealing (if fastening through roof), proper adhesive selection, cable routing through vehicle/boat, charge controller installation and wiring, waterproofing and strain relief. Professional installers ensure watertight installation preventing leaks and corrosion. Competent DIY installers achieve successful results with careful planning, proper materials, and attention to waterproofing details. Critical: test installation with water hose before finalizing—identify leaks early preventing interior damage. Medium 110W panel simplifies handling compared to large 200W panels while providing meaningful output improvement over compact 80W panels. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for extreme outback conditions and harsh marine environments. Components engineered for mobile installation vibration and environmental exposure. 12-month or 20,000km warranty providing peace of mind. Australian-based technical support assisting with installation planning and technical questions. Quality assurance for critical permanent installations across entire panel range—110W panel receives identical construction quality as premium 200W models ensuring reliable long-term performance. Technical Specifications SKU DT-SPF110-1 Product Type Semi-Flexible Solar Panel Brand Drivetech 4x4 Maximum Power Output 110W Maximum Power Voltage 20.16V Maximum Power Current 5.45A Open Circuit Voltage 23.75V Short Circuit Current 6.05A Panel Construction ETFE coating with anti-crack film Cell Type Monocrystalline Panel Dimensions 930mm (L) × 670mm (W) × 3mm (H) Panel Thickness 3mm (ultra-thin) Bend Radius Up to 30 degrees Mounting Stainless steel eyelets (adhesive + fasteners) Cable Length 90cm (4mm²) Connector Type MC4 (industry standard) Weight Lightweight mid-range design Charge Controller Not included (PWM or MPPT required) Weather Resistance ETFE coating (UV resistant, waterproof) Ideal Battery Size 75-100Ah auxiliary batteries Daily Generation 30-38Ah (optimal 6-hour sunlight) Warranty 12 months or 20,000km Applications Standard Vehicle Roof, Medium Caravan, Boat, Balanced Power Installations Installation Type Permanent mounting (adhesive and/or fasteners) Frequently Asked Questions Q: Why choose 110W instead of 80W or 160W panels? A: 110W represents optimal balance for many touring and camping applications. Choose 110W over 80W when: consumption consistently 35-45Ah daily (single fridge plus accessories), battery 75-100Ah requiring faster recovery, weekend camping transitions to extended trips requiring higher output, roof space adequate for 930×670mm panel. Choose 110W over 160W when: budget-conscious seeking quality without premium cost, roof space limited (930mm length vs 1245mm for 160W), consumption doesn't justify 160W output (below 45Ah daily), weight considerations important for small vehicles. Example decision: consumption 38Ah daily with 85Ah battery—80W marginal (generates 28Ah requiring frequent DC-DC supplement), 110W adequate (generates 35Ah covering most consumption), 160W excessive (generates 50Ah exceeding requirements). 110W "Goldilocks" solution for typical touring—not too small, not too large, just right for mainstream requirements. Q: How long does it take to charge my 100Ah auxiliary battery with this panel? A: Charging time depends on battery state of charge and sunlight conditions. Example: 100Ah AGM battery depleted to 60% capacity (40Ah consumed) in optimal conditions generates approximately 5-5.3A charging current during peak hours. Bulk charging phase at 5-5.3A recovers approximately 30Ah in 6 hours. Absorption phase tapers current recovering remaining 10Ah in 2-3 hours. Total charging time approximately 8-9 hours optimal sunlight—adequate for single day recovery from moderate overnight consumption. Real-world camping: consume 35-40Ah overnight (fridge, lights, devices), recover 30-38Ah during daylight, deficit 2-8Ah covered by occasional DC-DC charging during driving or reducing consumption slightly. For sustainable indefinite camping: limit consumption to 35Ah daily matching panel generation, or drive 1-2 hours every 2-3 days supplementing solar with DC-DC charging recovering minor deficit. Q: Can I install two 110W panels together for 220W total? A: Yes, dual 110W panels create excellent balanced power system. Two 110W panels parallel-connected generate 220W total (10.9A combined current) providing substantial charging capability for comprehensive camping requirements. Advantages of dual 110W over single 200W panel: more flexible positioning (two 930×670mm panels vs one 1520×680mm panel), fits narrower roofs (930mm length vs 1520mm), distributed weight across two mounting locations, redundancy if one panel damaged. Configuration: connect both panels parallel using MC4 Y-branch connectors, combined 10.9A requires 15-20A charge controller (MPPT recommended for dual-panel efficiency). Dual 110W output (55-65Ah daily) adequate for: dual fridge installations, high consumption camping (50-60Ah daily), 100-150Ah battery systems, comprehensive touring requiring significant renewable power. Professional installation recommended ensuring proper parallel wiring and optimal positioning. Q: What size charge controller do I need for this 110W panel? A: Single 110W panel requires minimum 10A charge controller (5.45A panel output plus safety margin). Recommended controllers: 10A PWM (economical, adequate for single panel budget installation $50-100), 10-15A MPPT (maximum efficiency, enables future expansion $150-250). PWM acceptable for cost-conscious single-panel installations generating 5-5.3A charging current. MPPT extracts 15-30% additional power (6-7A output vs 5-5.3A PWM) justifying investment for premium applications or users planning future panel expansion. For dual 110W panels: combined 10.9A output requires 15-20A controller minimum—MPPT strongly recommended for dual-panel arrays maximizing combined efficiency. Calculate controller capacity: single panel needs 10A minimum, dual panels need 15-20A, future expansion to three panels needs 20-25A—size controller for planned maximum capacity avoiding replacement when adding panels. Q: Will this panel fit on my standard wagon or SUV roof? A: 930×670mm dimensions fit most standard vehicles with roof racks. Typical fitment: standard wagons with 1000-1200mm × 1000-1200mm roof area—excellent fit with space margin, medium SUVs with typical roof dimensions—adequate clear space, dual-cab utes with canopy roofs—fits canopy roof between mounting rails, standard caravans with front roof section—perfect size avoiding pop-top mechanisms. Measure available roof space before ordering: length × width clear area between roof racks, vents, hatches, antennas. Panel requires approximately 950×700mm clear area plus margin for mounting and cable routing. Compare with other panel sizes: 80W requires 850×700mm (more compact for tight spaces), 110W requires 950×700mm (balanced mainstream fitment), 160W requires 1250×700mm (requires longer clear roof sections). Professional installers assist measuring and positioning optimization ensuring proper clearances and avoiding obstructions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Drivetech 4x4 DTSB250 250W Foldable Solar Blanket Kit - Premium Portable Solar Panel with MPPT 20A Charge Controller, Anderson Connectors, and Complete Wiring Kit for High-Output 4WD Camping, Caravan, and Off-Grid Battery Charging Maximize your off-grid power generation with Drivetech 4x4 DTSB250 250W Foldable Solar Blanket Kit—featuring premium 250W monocrystalline solar panel delivering up to 12.19A charging current for maximum-speed auxiliary battery charging at campsite, advanced MPPT 20A solar charge controller extracting 15-30% more power than PWM controllers through intelligent maximum power point tracking technology, portable foldable design packing from large deployed size to compact folded dimensions for efficient storage and transport, complete professional-grade wiring kit with 5m heavy-duty 4mm² cable and Anderson-style quick-disconnect plugs enabling convenient setup and connection to auxiliary battery systems, additional 0.5m alligator clip adapter providing direct battery terminal connection without permanent wiring, high-quality lightweight monocrystalline construction providing superior sunlight absorption and power output compared to traditional polycrystalline panels, durable weather-resistant materials engineered for camping and 4WD off-roading withstanding harsh outdoor environments, MPPT charge controller LCD display showing charging status, battery voltage, charging current, and system diagnostics, automatic multi-stage charging algorithm (bulk, absorption, float) optimizing battery health and charging efficiency, suitable for high-consumption camping trips requiring rapid battery recovery, caravan installations with large battery banks and extensive power requirements, off-grid work-from-vehicle setups powering laptops and equipment, dual fridge installations consuming 40-60Ah daily, full-time touring requiring comprehensive renewable power generation, and professional applications demanding maximum portable solar performance, eliminates generator noise and fuel costs providing silent high-output renewable power generation, significantly faster charging than 200W and smaller panels enabling complete battery recovery within single optimal sunlight day, quick deployment design enabling setup in minutes without tools or complex installation, Anderson connector compatibility with common auxiliary battery systems and DC-DC chargers, MPPT technology maximizing power extraction during variable light conditions including clouds, morning/evening reduced intensity, and non-optimal panel angles, includes comprehensive user manual with setup instructions and MPPT controller operation guidance, ideal for 100-150Ah auxiliary battery systems and high-consumption applications exceeding 60Ah daily, part of comprehensive Drivetech 4x4 Solar range including semi-flexible panels (60W, 80W, 110W, 160W) and foldable blankets (120W, 200W, 250W), Drivetech 4x4 Australian designed for extreme outback touring and professional remote applications, 12-month or 20,000km warranty covering manufacturing defects, and providing ultimate portable high-output solar charging solution for serious off-grid adventurers and full-time travelers. Product Overview Drivetech 4x4 DTSB250 250W Foldable Solar Blanket Kit represents premium portable solar technology delivering maximum charging performance for demanding off-grid applications. As the flagship model in Drivetech 4x4's foldable solar blanket range, the 250W output with 12.19A maximum power current exceeds 200W panels (9-11A) by 20-35% providing fastest available portable solar charging—critical advantage for large battery banks, high consumption setups, and rapid recovery requirements. Charging capacity sufficient for comprehensive power needs—dual fridges, inverter loads, extensive lighting, communication equipment, and continuous device charging—without depleting auxiliary battery capacity. Monocrystalline solar cell construction delivers superior performance compared to polycrystalline alternatives. Monocrystalline cells offer higher efficiency (15-20% vs 13-16% polycrystalline), better low-light performance maintaining output during cloudy conditions and morning/evening reduced intensity, superior temperature coefficient maintaining efficiency during hot weather, and longer lifespan with slower degradation over decades. Monocrystalline construction maximizes power generation from portable panel design—critical for serious off-grid applications requiring maximum power from limited panel area. Advanced MPPT (Maximum Power Point Tracking) 20A charge controller delivers 15-30% more power extraction compared to PWM (Pulse Width Modulation) controllers included with lower-tier solar blankets. MPPT technology continuously tracks solar panel maximum power point adjusting voltage and current for optimal power transfer regardless of battery state of charge, temperature, or light conditions. Particularly effective during variable light conditions—morning/evening reduced intensity, partial clouds, non-optimal panel angles—where PWM loses significant efficiency. MPPT investment justified for 250W high-output applications maximizing panel performance and accelerating battery recovery. MPPT Technology Advantage: MPPT charge controller extracts maximum available power from solar panel under all conditions. MPPT operation: panel generates optimal voltage at maximum power point, battery requires specific charging voltage (varies by chemistry and charge stage), MPPT converts excess voltage into additional charging current rather than wasting as heat (PWM approach). Result: 15-30% more charging current reaching battery—250W panel with MPPT generates 12-14A charging current, same panel with PWM generates 10-11A. Daily difference: 250W MPPT generates 65-80Ah optimal conditions vs 55-65Ah with PWM—meaningful advantage for high-consumption applications requiring maximum daily generation. MPPT particularly valuable for 250W investment maximizing return on premium panel purchase. Maximum Charging Performance: 12.19A maximum power current delivers professional-grade charging rivaling small fixed installations. Charging rate adequate for recovering extensive daily consumption—dual fridges 6-8A continuous (36-48Ah daily combined), inverter loads for laptops, tools, appliances (15-25Ah), extensive LED lighting (10-15Ah evening), water pump frequent use (3-5Ah), USB devices and communication equipment (4-6Ah). Total daily consumption 68-99Ah—250W MPPT panel recovers 65-80Ah during optimal 6-hour sunlight maintaining battery capacity with minimal deficit covered by occasional DC-DC charging during driving. Enables true off-grid sustainability for comprehensive power requirements impossible with smaller panels. Ideal for High-Consumption Applications: 250W output sized perfectly for: dual fridge setups consuming 40-60Ah daily maintaining refrigeration and freezing simultaneously, full-time vehicle dwelling requiring continuous power for living systems, work-from-vehicle setups powering laptops, monitors, Starlink internet, and office equipment, professional photography/videography requiring battery charging for cameras and drones, communication-dependent applications (emergency services, field research, remote work) requiring reliable power, and comprehensive touring rigs with extensive auxiliary systems. Single 250W panel eliminates need for multiple smaller panels simplifying deployment and cable management. Complete Professional Wiring Kit: Included wiring provides everything needed for immediate battery connection. 5m heavy-duty 4mm² cable with Anderson-style quick-disconnect plugs enables flexible panel positioning away from vehicle shade while maintaining secure connection. Anderson plugs enable rapid setup and breakdown without tools—connect arriving at campsite, disconnect when departing. Additional 0.5m alligator clip adapter provides direct battery terminal connection for installations without permanent Anderson connectors—immediate solar charging capability without wiring modifications. Professional-grade components ensuring reliable long-term operation throughout camping seasons. Lightweight Portable Design: Monocrystalline construction combined with lightweight materials creates portable high-output solar solution. Foldable design enables compact storage when not in use, quick deployment at campsite, and easy repositioning for optimal sun angle throughout day. Integrated carry handle and protective storage case simplify transport and prevent panel damage during transit. Significantly more portable than equivalent rigid panels requiring dedicated mounting and storage solutions. Rapid Deployment and Storage: Quick-setup design enables full deployment in under 3 minutes without tools. Unfold panel, position for optimal sun exposure, connect Anderson plug to battery system, verify MPPT controller display showing charging—complete setup. Folding reverses process—disconnect Anderson plug, fold panels into compact bundle, secure with integrated straps, store in protective case. Time savings valuable during brief stops or overnight camping requiring quick setup and departure. MPPT Controller LCD Display: Advanced LCD display shows comprehensive charging information—battery voltage (monitoring state of charge), charging current (verifying panel output), daily amp-hours generated (tracking total daily production), charging stage (bulk/absorption/float), and fault codes (diagnosing issues). MPPT display provides significantly more information than basic PWM controllers enabling performance optimization and troubleshooting. Monitor daily generation comparing to specifications—consistently low output indicates shading problems, dirty panel, or equipment issues requiring attention. Multiple Battery Compatibility: MPPT controller supports 12V and 24V battery systems with automatic voltage detection. Charges lead-acid, AGM, gel, and lithium (LiFePO4) batteries with programmable charging profiles. Lithium compatibility particularly valuable for modern auxiliary battery systems—MPPT regulates voltage precisely matching lithium requirements (14.2-14.6V) preventing overcharge. AGM profile default for most camping applications—controller automatically progresses through optimal charging stages maximizing battery health and lifespan. Part of Comprehensive Solar Range: DTSB250 represents flagship model in Drivetech 4x4's comprehensive solar range. Complete lineup includes: semi-flexible panels (60W, 80W, 110W, 160W, 200W) for permanent roof mounting, foldable blankets (120W, 200W, 250W) for portable deployment, solar regulators and accessories. Scalable solutions matching every application from compact weekend camping (80-120W) to comprehensive full-time touring (200-250W). Quality monocrystalline construction across entire range ensuring consistent performance and reliability. Drivetech 4x4 Quality and Support: Drivetech 4x4 Australian designed for extreme outback touring and professional applications. Components engineered for harsh Australian conditions—extreme heat, dust, and UV exposure. 12-month or 20,000km warranty providing peace of mind for premium equipment investment. Australian-based technical support assisting with setup, MPPT controller configuration, and performance optimization. Quality assurance for critical power generation equipment enabling extended off-grid adventures. Part of comprehensive Drivetech 4x4 range including suspension, recovery gear, compressors, awnings, bumpers, and complete vehicle upgrade solutions. Technical Specifications SKU DTSB250 Product Type Foldable Solar Blanket with MPPT Controller Brand Drivetech 4x4 Maximum Power Output 250W Solar Cell Type Monocrystalline Maximum Power Current 12.19A Charge Controller MPPT 20A (included) Controller Compatibility 12V and 24V systems Construction High-quality lightweight durable materials Cable Length 5m (4mm² with Anderson plugs) Alligator Clip Adapter 0.5m (to Anderson) Connector Type Anderson-style quick-disconnect Weight Lightweight portable design Battery Compatibility 12V/24V Lead-Acid, AGM, Gel, Lithium (LiFePO4) Weather Resistance Weatherproof (rain and dust resistant) Ideal Battery Size 100-150Ah auxiliary batteries Daily Generation 65-80Ah (optimal 6-hour sunlight with MPPT) Warranty 12 months or 20,000km Applications High-Consumption 4WD Camping, Full-Time Touring, Dual Fridges, Work-from-Vehicle, Professional Applications Frequently Asked Questions Q: What's included in the complete 250W foldable solar blanket kit? A: Complete kit includes: 250W monocrystalline foldable solar panel, MPPT 20A charge controller with LCD display, 5m heavy-duty 4mm² cable with Anderson-style quick-disconnect plugs, 0.5m alligator clip adapter for direct battery connection, protective storage case with integrated carry handle, comprehensive user manual with setup instructions and MPPT controller operation guidance. Everything needed for immediate solar charging—simply connect to auxiliary battery and deploy panel at campsite. No additional components required beyond panel, controller, wiring, and battery. Premium complete solution eliminating need to source individual components separately. Q: How does this 250W blanket compare to the 200W blanket in the range? A: 250W delivers 25% more output than 200W (12.19A vs 9.81A maximum current), generating approximately 15-20Ah additional daily capacity (65-80Ah vs 50-65Ah optimal conditions). Advantages of 250W: faster battery recovery from heavy consumption, adequate for dual fridge installations and high-consumption setups, superior for full-time touring and work-from-vehicle applications, MPPT controller standard (extracts maximum efficiency). Advantages of 200W: lower cost, adequate for single fridge and moderate consumption, lighter and more compact. Choose 250W for: consumption consistently exceeding 60Ah daily, dual fridge installations, full-time living, work-from-vehicle setups, maximum portable charging capability. Choose 200W for: consumption 45-60Ah daily, single fridge installations, budget-conscious buyers, adequate power without premium investment. Q: Can this replace the need for a DC-DC charger in my dual battery system? A: 250W solar provides substantial charging but typically supplements rather than replaces DC-DC charger. Combined approach optimal: DC-DC charger recovers battery during driving (30A+ charging rate rapidly recovering capacity), 250W solar maintains battery during camping (12A+ charging rate sustaining capacity without engine operation). DC-DC alone requires regular driving maintaining battery—impractical for extended stationary camping. Solar alone requires perfect weather and consumption management—cloudy days reduce generation requiring consumption reduction. Combined system provides redundancy and flexibility: drive periodically supplementing solar during poor weather, rely primarily on solar during optimal conditions minimizing driving solely for battery charging. For full-time touring, 250W solar plus DC-DC charger provides comprehensive power independence. Q: What happens during cloudy weather or less-than-optimal conditions? A: Monocrystalline cells maintain partial output during cloudy conditions and sub-optimal light—superior low-light performance compared to polycrystalline panels. Cloudy day output typically 20-40% of full-sun output depending on cloud density—light clouds 40% (5-6A charging), heavy overcast 20% (2-3A charging). MPPT controller maximizes available power extraction during variable conditions maintaining higher efficiency than PWM technology. Morning/evening reduced intensity generates 30-50% of midday output—MPPT tracks maximum power point maintaining optimal operation. Panel positioning critical during marginal conditions—orient panel perpendicular to available light, avoid shade from vehicles and equipment, clean panel surface maintaining efficiency. During extended poor weather: monitor battery voltage preventing excessive discharge, reduce consumption conserving battery, run vehicle engine periodically charging through DC-DC charger, consider generator backup for critical applications. Q: Is this suitable for permanent installation on vehicle roof or only portable use? A: Designed specifically for portable deployment at campsite—not suitable for permanent roof mounting. Portable deployment advantages: position optimally facing sun (impossible with fixed roof mounting), angle panel throughout day tracking sun movement maximizing generation, remove from vehicle during urban driving (preventing theft and damage), store when not camping (not consuming roof space year-round), protect during severe weather. For permanent roof-mounted solar, consider Drivetech 4x4 semi-flexible panels (DT-SPF80-1, DT-SPF110-1, DT-SPF160-1, DT-SPF200-1) designed specifically for adhesive mounting and permanent installation. Most serious off-grid travelers combine both: semi-flexible panel permanently roof-mounted (generating during driving and parking), foldable blanket deployed at campsite in optimal location (maximizing total generation). Combined approach provides comprehensive power: 160W roof panel + 250W deployable blanket = 410W total capacity supporting extensive power requirements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Baintech BT-JUMP/AIR combines emergency jump starting and tyre inflation in one compact unit This 12V jump starter delivers 1200A peak current to start petrol and diesel engines, while the integrated air compressor inflates tyres to 160PSI for immediate roadside recovery. The 16000mAh lithium battery provides multiple jump starts per charge and powers Quick Charge USB output for devices. Weighing just 1.5kg, it fits in glove boxes or under seats for emergency access across 4WD touring, daily driving and remote work applications. Designed for Australian conditions, where roadside assistance response times can stretch to hours in regional areas. The dual-function design eliminates the need to carry separate jump starter and compressor units, saving cargo space in utes, caravans and 4WDs. Operating range from -20°C to 60°C ensures reliable performance across alpine winter starts and outback summer heat. Key Specifications Peak current: 1200A Starting current: 500A Battery capacity: 16000mAh (59.2Wh) Air compressor maximum pressure: 160PSI Quick Charge output: 5V/3A, 9V/2A, 12V/1.5A Operating temperature range: -20°C to 60°C Full charge time: Approximately 4 hours Weight: 1.5kg Dimensions: 223mm (L) x 123mm (W) x 63mm (H) Features & Benefits Dual Emergency Function: Eliminates the choice between jump starter or compressor when packing for trips. One unit handles dead batteries and flat tyres, the two most common roadside failures in remote areas. 1200A Peak Starting Power: Handles larger petrol engines and light diesel applications that lower-rated units can't start. Critical for utes, SUVs and 4WDs with high-compression engines in cold morning starts. High-Pressure Air Delivery: 160PSI maximum pressure inflates truck tyres, LT-rated 4WD rubber and caravan tyres to correct pressures. Significantly faster than 12V cigarette lighter compressors during tyre pressure adjustments after beach or track work. Quick Charge Technology: Powers phones, tablets and navigation devices at full speed during emergencies. The 16000mAh capacity provides multiple device charges when camping or during extended breakdowns. Extreme Temperature Performance: Functions reliably from -20°C alpine conditions to 60°C engine bay heat. Unlike basic jump starters that fail in temperature extremes, this unit maintains performance across Australia's full climate range. Compact Emergency Storage: At 1.5kg and compact dimensions, it stores under seats, in centre consoles or door pockets without consuming valuable cargo space in packed touring vehicles. Technical Specs Model: BT-JUMP/AIR Voltage: 12V system Peak current output: 1200A Starting current output: 500A Battery type: Lithium (16000mAh / 59.2Wh) Jump start output: 15V/10A, 12V USB Quick Charge output: 5V/3A, 9V/2A, 12V/1.5A Input charging: 9V/2A Full charge duration: Approximately 4 hours Air compressor maximum pressure: 160PSI (11 bar) Operating temperature: -20°C to 60°C Physical dimensions: 223mm x 123mm x 63mm Unit weight: 1.5kg Compatible With / Goes Well With 12V automotive batteries (petrol and light diesel engines) 4WD recovery kits and emergency supplies Caravan and camping electrical systems Touring accessory packages Portable battery boxes and dual battery systems USB-powered devices and navigation equipment Tyre pressure monitoring systems (TPMS) Vehicle emergency kits and roadside safety equipment Features & Benefits Dual Emergency Function: Eliminates the choice between jump starter or compressor when packing for trips. One unit handles dead batteries and flat tyres, the two most common roadside failures in remote areas. 1200A Peak Starting Power: Handles larger petrol engines and light diesel applications that lower-rated units can't start. Critical for utes, SUVs and 4WDs with high-compression engines in cold morning starts. High-Pressure Air Delivery: 160PSI maximum pressure inflates truck tyres, LT-rated 4WD rubber and caravan tyres to correct pressures. Significantly faster than 12V cigarette lighter compressors during tyre pressure adjustments after beach or track work. Quick Charge Technology: Powers phones, tablets and navigation devices at full speed during emergencies. The 16000mAh capacity provides multiple device charges when camping or during extended breakdowns. Extreme Temperature Performance: Functions reliably from -20°C alpine conditions to 60°C engine bay heat. Unlike basic jump starters that fail in temperature extremes, this unit maintains performance across Australia's full climate range. Compact Emergency Storage: At 1.5kg and compact dimensions, it stores under seats, in centre consoles or door pockets without consuming valuable cargo space in packed touring vehicles.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less