GMF4x4 DG-2007 BLK Ford Raptor Next Gen and RA Rear Differential E-Locker Guard Black A heavy-duty 3mm textured black steel rear differential E-Locker protection guard designed specifically for the Ford Raptor Next Gen and RA, bolting directly to the factory fasteners for full front, side, and underneath differential coverage in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 DG-2007 BLK is a rear differential E-Locker protection guard engineered specifically for the Ford Raptor Next Gen and RA. Protecting the rear diff E-Locker from off-road damage can save thousands in parts and repairs, and prevent extended dealer wait times on non-stock components. The guard is designed to slip over the differential and bolt directly into place using the existing factory fasteners, requiring no drilling and taking approximately 5 minutes to install. The 3mm textured black steel construction with welded design significantly increases rigidity, and the guard provides full coverage across the front, sides, and underneath of the differential. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits The 3mm textured black steel welded construction provides a rigid, heavy-duty guard that fully covers the front, sides, and underside of the rear differential E-Locker, protecting against rocks, debris, and off-road impacts that could cause costly damage requiring dealer repair and long parts wait times. The slip-on design uses factory fasteners for a secure, vehicle-specific fit with no drilling into the vehicle. Installation takes approximately 5 minutes. The textured black steel finish provides a durable, corrosion and chip-resistant surface suited to harsh off-road and outdoor environments. Technical Specs Specification Detail SKU DG-2007 BLK Brand GMF4x4 Compatible Vehicle Ford Raptor Next Gen / Ford Raptor RA Colour Black Material 3mm Textured Black Steel Construction Welded Coverage Front, Side and Underneath Differential Mounting Method Factory Fasteners Drilling Required No Installation Time Approx. 5 minutes Origin Made in Australia Compatible With Ford Raptor Next Gen Ford Raptor RA Frequently Asked Questions Does installation require drilling into the vehicle? No. The DG-2007 BLK slips over the differential and bolts directly to the factory fasteners using the existing hardware. No drilling or modification to the vehicle is required. Why is protecting the rear diff E-Locker important for off-road driving? The rear differential E-Locker is an exposed component vulnerable to impact from rocks and debris during off-road driving. Damage to the E-Locker unit or its wiring can be expensive to repair and may require extended dealer wait times for non-stock parts. The DG-2007 BLK provides full front, side, and underside coverage to prevent this damage before it occurs. Is this guard compatible with the standard Ford Ranger (non-Raptor)? The DG-2007 BLK is designed specifically for the Ford Raptor Next Gen and RA. Compatibility with other Ranger variants is not confirmed. Please check with us if you have a non-Raptor model before purchasing. Is a stainless steel version available? Please check with us for stainless steel finish availability for the DG-2007 guard. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2014-FG-KING Toyota LandCruiser LC300 Fuel Filter Guard Suits King Shocks A 3mm powder coated steel fuel filter protection guard designed specifically for the Toyota LandCruiser LC300, engineered to fit around King LC300 shocks and provide full coverage protection for the plastic fuel filter and housing from off-road damage. Installs in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 2014-FG-KING is a fuel filter protection guard engineered specifically for the Toyota LandCruiser LC300. The guard covers and protects the plastic fuel filter and housing from rocks, debris, and off-road impacts, providing full coverage to prevent damage to a component that is costly to replace and difficult to source quickly. This guard is designed to fit around King LC300 shocks. Hardware and instructions are included for a straightforward installation taking approximately 5 minutes. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. What's in the Box 3mm Steel Powder Coated Black Guard Hardware and Installation Instructions Features & Benefits The 3mm steel powder coated black construction provides a rigid, durable guard capable of withstanding off-road rock and debris strikes without deforming, protecting the plastic fuel filter and housing underneath. Full coverage wraps around the filter for comprehensive protection from the front, sides, and below. Designed to fit around King LC300 shocks, the guard integrates cleanly with the existing suspension setup without conflicting with shock absorber movement or clearance. Installation takes approximately 5 minutes with all hardware and instructions included. Technical Specs Specification Detail SKU 2014-FG-KING Brand GMF4x4 Compatible Vehicle Toyota LandCruiser LC300 Compatible Shocks King LC300 Shocks Guard Coverage Full Coverage (Fuel Filter and Housing) Material 3mm Steel Finish Powder Coated Black Installation Time Approx. 5 minutes Included Guard, Hardware and Installation Instructions Origin Made in Australia Compatible With Toyota LandCruiser LC300 with King Shocks Frequently Asked Questions Will this guard fit LC300 models with standard or non-King shocks? The 2014-FG-KING is specifically designed to fit around King LC300 shocks. Compatibility with standard factory shocks or other aftermarket shock brands is not confirmed. Please check with us before purchasing if your LC300 is not fitted with King shocks. What does this guard protect? The 2014-FG-KING covers and protects the plastic fuel filter and housing on the Toyota LandCruiser LC300 from rocks, debris, and off-road impact. Damage to the plastic fuel filter housing can be expensive to repair and may require sourcing replacement parts. Does installation require drilling? Your product data does not specify whether drilling is required. Please contact us for installation details before purchasing. What material is the guard made from? The guard is constructed from 3mm steel with a powder coated black finish for durability and corrosion resistance in off-road and outdoor environments. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 2320-MG GMC Sierra Denali 2500 2020-Current Underbody Module Protection Guard A 3mm welded steel underbody module protection guard designed specifically for the GMC Sierra Denali 2500 2020 to current, bolting directly to the factory location to protect sensors and modules from stones, rocks, and branches off-road. All hardware, mounts, and instructions included. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 2320-MG is an underbody module protection guard engineered specifically for the GMC Sierra Denali 2500 2020 to current. The guard bolts directly to the factory mounting location for a quick and easy installation, protecting the vehicle's underside sensors and modules from damage caused by stones, rocks, and branches during off-road driving. Manufactured from 3mm welded steel and finished in a hard-wearing black powder coat, the 2320-MG provides a rigid, durable barrier against underbody impact. All hardware, mounts, and instructions are included. Proudly made in Australia by GMF4x4. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. What's in the Box 2320-MG Underbody Module Protection Guard Hardware Mounts Installation Instructions Features & Benefits The 3mm welded steel construction provides a rigid, heavy-duty guard that absorbs and deflects stones, rocks, and branches before they can reach the sensors and electronic modules housed in the underbody of the GMC Sierra Denali 2500. Damage to these components can result in costly repairs and difficult-to-source replacement parts. The black powder coat finish delivers a hard-wearing, corrosion-resistant surface suited to the harsh conditions experienced in off-road and worksite environments. The guard bolts directly to the factory mounting location with no drilling required, using the included hardware and mounts for a straightforward installation. Technical Specs Specification Detail SKU 2320-MG Brand GMF4x4 Compatible Vehicle GMC Sierra Denali 2500 2020-Current Guard Type Underbody Module Protection Guard Material 3mm Welded Steel Finish Black Powder Coat Mounting Method Factory Mounting Location Drilling Required No Included Hardware, Mounts and Installation Instructions Origin Made in Australia Compatible With GMC Sierra Denali 2500 2020-Current Frequently Asked Questions What does this guard protect? The 2320-MG protects the sensors and electronic modules located in the underbody of the GMC Sierra Denali 2500 from stones, rocks, and branches during off-road driving. Damage to these components can be expensive to repair and may require extended wait times for replacement parts. Does installation require drilling into the vehicle? No. The 2320-MG bolts directly to the factory mounting location using the included hardware and mounts. No drilling or modification to the vehicle is required. Is all installation hardware included? Yes. Hardware, mounts, and installation instructions are all included in the pack. Is this guard compatible with other GMC Sierra variants? The 2320-MG is designed specifically for the GMC Sierra Denali 2500 2020 to current. Compatibility with other GMC Sierra variants is not confirmed. Please check with us if you have a different model before purchasing. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 MK3-Links-GMF Ford Ranger MK3 Adjustable Chromoly Swaybar Links Purpose-engineered chromoly swaybar links for the Ford Ranger MK3, delivering the strongest adjustable swaybar link kit on the market with a complete pair, washers, and nuts included. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 MK3-Links-GMF is a set of adjustable chromoly swaybar links designed specifically for the Ford Ranger MK3. Manufactured from chromoly steel, these links are engineered to be the strongest swaybar link kit available for this platform, providing a direct upgrade over factory links for improved durability and performance. The kit includes a pair of GMF adjustable links, washers, and nuts, making it a complete ready-to-install solution straight out of the packaging. Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Chromoly Steel Construction: The MK3-Links-GMF is manufactured from chromoly steel, delivering superior strength and durability over standard factory swaybar links. GMF4x4 engineers these as the strongest swaybar link option on the market for the Ford Ranger MK3 platform. Adjustable Design: The links feature an adjustable configuration, allowing fine-tuning of swaybar position to suit lifted or modified suspension setups on the Ford Ranger MK3 without compromising factory swaybar function. Complete Kit Included: The kit comes with a pair of GMF adjustable links, washers, and nuts, providing everything needed for a complete installation in a single purchase. Australian Made by GMF4x4: Designed and manufactured in Australia by GMF4x4, with registered designs, patents, and trademarks in Australia and internationally backing the quality and engineering of every product. Technical Specs Specification Detail SKU MK3-Links-GMF Brand GMF4x4 Compatible Vehicle Ford Ranger MK3 Material Chromoly Steel Link Type Adjustable Kit Contents Pair of GMF Adjustable Links, Washers, Nuts Origin Made in Australia Compatible With Ford Ranger MK3 Frequently Asked Questions Are both left and right side links included? Yes. The MK3-Links-GMF kit includes a pair of GMF adjustable links, covering both sides of the vehicle. Washers and nuts are also included for a complete installation. Why should I upgrade my swaybar links on the Ford Ranger MK3? Factory swaybar links on the Ford Ranger MK3 are designed for stock ride height and standard conditions. Upgraded chromoly links provide greater strength and durability, and the adjustable design of the GMF4x4 kit allows correct swaybar geometry to be maintained on lifted or modified suspension setups. What material are these links made from? The MK3-Links-GMF links are manufactured from chromoly steel, which provides a significant strength advantage over standard factory swaybar link materials. Does this kit fit all Ford Ranger MK3 variants? The MK3-Links-GMF is designed for the Ford Ranger MK3. Please confirm your specific variant and build date with us before purchasing if you are unsure of your Ranger generation. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Full Coverage Fuel Filter Protection — Built Tough for the LC300 Product Overview The GMF4x4 FG-2014 is a purpose-engineered fuel filter protection guard designed specifically for the Toyota LandCruiser LC300. Built from 3mm steel with a durable powdercoat black finish, it wraps around the plastic fuel filter and housing to shield one of your vehicle's most vulnerable under-bonnet components from off-road damage, rocks, sticks, debris, and corrugation impacts that can crack or puncture the factory plastic unit. This is a bolt-on solution requiring no modification to your vehicle, with a claimed install time of around 5 minutes using the included hardware. The brackets and guard are proudly manufactured in Australia, making this a solid choice for LC300 owners who spend serious time in the bush, on outback tracks, or tackling corrugated station roads across Western Australia and beyond. Key Specifications Designed specifically for Toyota LandCruiser LC300 Full coverage design — protects plastic fuel filter and housing Constructed from 3mm steel, powdercoated black Installation time: approximately 5 minutes Kit includes: steel guard, mounting hardware, and installation instructions Australian-made brackets SKU / Part Number: FG-2014 Brand: GMF4x4 Features & Benefits Full Coverage Protection — Unlike partial guards, the FG-2014 covers the entire plastic fuel filter and housing, giving you confidence when tackling rocky tracks, creek crossings, and heavily corrugated outback roads. 3mm Steel Construction — Heavy-gauge steel provides serious impact resistance against rocks, sticks, and trail debris — the kind of punishment that cracks factory plastic components without warning. Powdercoat Black Finish — The durable powdercoat finish resists corrosion, chipping, and the harsh Australian elements, keeping the guard looking clean under the bonnet for the long haul. 5-Minute Install — Designed for a straightforward bolt-on fitment using the included hardware and instructions. No drilling, cutting, or fabrication required — get it on and get back on the track. Australian-Made Brackets — Proudly designed and manufactured in Australia, specifically for the LC300's engine bay geometry, ensuring accurate fit and reliable protection. Purpose-Built for the LC300 — Not a universal fit adapted for multiple vehicles — this guard is engineered for the Toyota LandCruiser LC300, so you know it's going to fit right the first time. Technical Specs Material: 3mm steel Finish: Powdercoat black Install time: Approximately 5 minutes Fitment type: Bolt-on, no modifications required Kit contents: Steel guard, mounting hardware, installation instructions Country of manufacture (brackets): Australia Part Number: FG-2014 Compatible With Toyota LandCruiser LC300 Note: Designed exclusively for the LC300 platform. Not confirmed for other LandCruiser series (e.g., 200 Series, 70 Series). Contact GMF4x4 to confirm fitment for other variants. Frequently Asked Questions Does this guard fit the Toyota LandCruiser LC300? Yes. The FG-2014 is designed specifically for the Toyota LandCruiser LC300 and is engineered to suit the LC300's factory fuel filter and housing layout without modification. How long does installation take? Installation takes approximately 5 minutes using the included hardware and instructions. The guard is a bolt-on fitment requiring no drilling, cutting, or permanent vehicle modifications. What does the kit include? The kit includes the 3mm powdercoated steel guard, all mounting hardware, and installation instructions. Everything needed for a complete install is included in the box. Will this guard fit other LandCruiser models such as the 200 Series or 70 Series? The FG-2014 is designed specifically for the LC300 platform. Compatibility with other LandCruiser series has not been confirmed — contact GMF4x4 directly to enquire about fitment for other models. Is this product made in Australia? Yes. GMF4x4 brackets are proudly made in Australia. GMF4x4 also holds registered designs, patents, and trademarks in Australia and internationally covering this product range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Parkmate PM-208CPAFILTER Genuine Replacement HEPA Filter for PM-208CPA Air Purifier Genuine replacement HEPA filter for the Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration, maintaining effective removal of small particles, pollen, dust, odours, and pet hair in vehicles and small spaces. Product Overview The Parkmate PM-208CPAFILTER is the genuine replacement filter designed specifically for the PM-208CPA 3-Stage Air Purifier. Regular filter replacement ensures the PM-208CPA continues to perform at full effectiveness, maintaining the 3-stage filtration system's ability to remove fine airborne particles, pollen, dust, odours, and pet hair from vehicle cabins and small indoor spaces up to 10 square metres. Using genuine Parkmate replacement filters ensures compatibility with the PM-208CPA's CleanAir-AI technology and maintains the clean air delivery rate of up to 13 cubic metres per hour. Refer to the PM-208CPA user manual for recommended filter replacement intervals based on usage and air quality conditions. Note: This is a replacement filter only. The PM-208CPA air purifier unit is sold separately. Features & Benefits Genuine Replacement Filter — purpose-built replacement for the Parkmate PM-208CPA 3-Stage Air Purifier HEPA Filtration — removes small particles, pollen, dust, odours, and pet hair from vehicle cabins and small spaces Maintains 13m3/h Performance — restores full clean air delivery rate of the PM-208CPA after replacement Compatible with CleanAir-AI Technology — genuine filter ensures continued performance with the PM-208CPA's intelligent filtration system Suitable for Vehicles and Small Spaces — supports air purification in vehicles, small offices, and household areas up to 10m2 Asthma and Allergy Friendly — continued filtration of common airborne triggers including pollen, dust, and pet hair Technical Specs Specification Detail Part Number PM-208CPAFILTER Brand Parkmate Product Type Replacement HEPA Filter Compatible Device Parkmate PM-208CPA Air Purifier Filtration Stages 3 Technology CleanAir-AI Compatible Applicable Area Up to 10m2 Max Air Volume (when fitted) 13m3 / Hour Filter Dimensions Please refer to product packaging or contact F.A.E. What's in the Box 1 x Parkmate PM-208CPAFILTER Replacement HEPA Filter Compatible With / Goes Well With Compatible With: Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration Goes well with: Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration (host unit, sold separately) Frequently Asked Questions Q: How often should the PM-208CPAFILTER be replaced? A: Replacement frequency depends on usage intensity and local air quality conditions. For vehicles used daily in urban or dusty environments, more frequent replacement may be required. Refer to the PM-208CPA user manual for the manufacturer's recommended replacement intervals and filter condition indicators. Q: Is this filter compatible with any other Parkmate air purifiers? A: The PM-208CPAFILTER is designed specifically for the Parkmate PM-208CPA Air Purifier. Compatibility with other Parkmate models is not confirmed. Contact F.A.E. with your purifier's model number to confirm filter compatibility before ordering. Q: Will using a non-genuine filter affect the PM-208CPA's performance? A: Using genuine Parkmate replacement filters ensures the PM-208CPA operates at its rated performance including the 13m3/h clean air delivery rate and full CleanAir-AI technology compatibility. Non-genuine filters may not meet the same filtration standards and could reduce purification effectiveness. Q: Is the PM-208CPA air purifier unit included with this filter? A: No. The PM-208CPAFILTER is a replacement filter only. The Parkmate PM-208CPA Air Purifier unit is sold separately. Q: How do I install the replacement filter? A: Refer to the PM-208CPA user manual for step-by-step filter replacement instructions. The process is designed to be straightforward and tool-free. Contact F.A.E. if you require assistance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hema HX-Box GPS Navigation Module with Hema Nav 3-Year Subscription and Wireless Apple CarPlay Android Auto GPS navigation module for in-car infotainment systems delivering wireless Apple CarPlay and Android Auto, premium on and off-road Hema Nav navigation with a 3-year subscription, and access to the Hema 4WD Maps app — all running on Android 13 with 6GB RAM and 64GB storage, integrating directly with your vehicle's existing head unit display. Product Overview The Hema HX-Box is a compact GPS navigation module that connects to your vehicle's existing wired Apple CarPlay or Android Auto head unit, adding wireless CarPlay and Android Auto smartphone connectivity alongside the full Hema Nav premium navigation platform. Powered by a Qualcomm SM6115 octa-core processor with Android 13, 6GB RAM, and 64GB onboard storage, the HX-Box delivers smooth, responsive navigation and app performance directly through your factory or aftermarket infotainment screen. The included 3-year Hema Nav subscription provides comprehensive on and off-road navigation for Australia and New Zealand, featuring a dynamic 3D Hema Explorer Map, HERE Technologies turn-by-turn route guidance with live traffic, off-road track guidance for remote destinations, over 1.8 million Points of Interest including campsites, fuel stops, and caravan parks, and 1.75 million kilometres of mapped roads and tracks. Quarterly map and software updates are delivered via Wi-Fi throughout the subscription period. The Hema 4WD Maps app is also accessible through the HX-Box, providing digitised versions of Hema's iconic printed maps, award-winning regional 4WD content, track recording, waypoints, and route plotting for extended off-road adventures. A separate subscription is required for the 4WD Maps app. Integration with Memory-Map enables access to digital versions of Hema's printed maps and maps from multiple providers. Note: The Hema HX-Box is compatible with wired Apple CarPlay and Android Auto infotainment systems only. The HX-Box connects to your head unit's USB port and enables wireless smartphone connectivity from that point. Confirm your head unit supports wired CarPlay or Android Auto before purchasing. MicroSD card support up to 512GB (card not included). Adaptor not included — 12/24V adaptor cable supplied for use with your own adaptor. Features & Benefits Wireless Apple CarPlay and Android Auto — adds wireless smartphone connectivity to compatible wired CarPlay/Android Auto head units via USB connection Hema Nav 3-Year Subscription Included — premium on and off-road navigation for Australia and New Zealand with quarterly map updates via Wi-Fi Dynamic 3D Hema Explorer Map — fully navigable Australia-wide coverage with HERE Technologies turn-by-turn routing and live traffic 1.8M+ Points of Interest — campsites, fuel stops, caravan parks, and more across Australia and New Zealand Off-Road Track Guidance — remote destination routing, track recording, waypoints, and GPX export for 4WD and adventure touring 1.75M km of Mapped Roads and Tracks — comprehensive coverage for both sealed and unsealed exploration Hema 4WD Maps App Access — digitised Hema printed maps, regional 4WD content, route plotting, and navigation stats (separate subscription required) Memory-Map Integration — access digital versions of Hema's printed maps and additional map providers Android 13 OS — Qualcomm SM6115 octa-core processor, 6GB RAM, and 64GB storage for fast, responsive performance Dual-Band Wi-Fi — 802.11 a/b/g/n/ac on 2.4GHz and 5GHz for reliable wireless connectivity Bluetooth 5.0 — stable wireless audio and device pairing MicroSD Expansion — supports up to 512GB MicroSD card for additional map and media storage 3-Year Hema Protect Warranty — full confidence with the included Hema warranty coverage Australia and New Zealand Coverage — both countries fully covered within the Hema Nav platform Technical Specs Specification Detail SKU HX-Box Brand Hema Product Type GPS Navigation Module Processor Qualcomm SM6115 Octa-Core (4 x Cortex-A73 Kryo Gold @2.0GHz + 4 x Cortex-A53 Kryo Silver @1.8GHz), 11nm Operating System Android 13 RAM 6GB Storage 64GB MicroSD Support Up to 512GB GPS Yes (GPS / GLONASS) Wi-Fi 802.11 a/b/g/n/ac, 2.4GHz + 5GHz Bluetooth 2.1+EDR / 3.0 / 4.1 LE / 4.2 BLE / 5.0 LE Apple CarPlay Wireless (requires wired CarPlay head unit) Android Auto Wireless (requires wired Android Auto head unit) Hema Nav Subscription 3-Year (live traffic, quarterly updates included) Hema 4WD Maps App Accessible (separate subscription required) Memory-Map Integration Yes Points of Interest 1.8M+ (campsites, fuel, caravan parks and more) Mapped Roads and Tracks 1.75M km Navigation Coverage Australia and New Zealand Map Updates Quarterly via Wi-Fi Power Input 5V 2A Power Consumption 5W USB Ports USB-A and USB-C Warranty 3-Year Hema Protect Box Contents 1 x HX-Box Unit, 2 x Data Cables, 1 x 12/24V Adaptor Cable (adaptor not included), 1 x User Manual What's in the Box 1 x Hema HX-Box GPS Navigation Module 2 x Data Cables 1 x 12/24V Adaptor Cable (Adaptor not included) 1 x User Manual Compatible With / Goes Well With Compatible With: Wired Apple CarPlay and Android Auto head units. The Hema HX-Box connects to the head unit's USB port and adds wireless CarPlay and Android Auto capability. Confirm your head unit supports wired CarPlay or Android Auto before purchasing. Goes well with: Pioneer DMH-AP6650BT 9 Inch Wireless CarPlay Android Auto Head Unit Hema HR-1 7 Inch Smart Monitor with Dual-Channel DVR MicroSD card up to 512GB (for additional map and media storage, sold separately) Frequently Asked Questions Q: Does the Hema HX-Box work with any head unit? A: The Hema HX-Box is compatible with head units that support wired Apple CarPlay or wired Android Auto via USB. It connects to the head unit's USB port and enables wireless smartphone connectivity from that point. It is not compatible with head units that do not support CarPlay or Android Auto. Confirm your head unit's compatibility before purchasing, or contact F.A.E. for guidance. Q: What is included in the 3-year Hema Nav subscription? A: The 3-year Hema Nav subscription includes access to the dynamic 3D Hema Explorer Map with Australia and New Zealand coverage, HERE Technologies live traffic and turn-by-turn routing, off-road track guidance, over 1.8 million Points of Interest, 1.75 million kilometres of mapped roads and tracks, and quarterly map and software updates delivered via Wi-Fi. The Hema 4WD Maps app requires a separate subscription. Q: Is the Hema 4WD Maps app included with the HX-Box? A: The Hema 4WD Maps app is accessible on the HX-Box but requires a separate subscription to use beyond any included trial period. The app provides digitised versions of Hema's iconic printed maps, award-winning regional 4WD content, track recording, route plotting, and waypoint navigation for off-road adventures. Check Hema's current subscription options at time of purchase. Q: Is a MicroSD card included? A: No. A MicroSD card is not included and must be purchased separately. The HX-Box supports MicroSD cards up to 512GB for additional map data and media storage. Q: Is the 12/24V power adaptor included? A: The 12/24V adaptor cable is included, however the adaptor itself is not included and must be sourced separately. Two data cables are included in the box for connectivity to the head unit.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hema Maps HX-M1 Motorbike and SxS GPS Smart Navigator with Hema Nav 3-Year Subscription and Wireless Apple CarPlay Android Auto Purpose-built 6.2-inch GPS smart navigator for motorcycles and side-by-sides, combining offline Hema Nav premium navigation with wireless Apple CarPlay and Android Auto, Bluetooth music and calls, handlebar controller, and HD front and rear camera compatibility for confident on-road and off-road adventure anywhere in Australia or New Zealand. Product Overview The Hema HX-M1 is a rugged, weatherproof GPS smart navigator built specifically for motorcycle and side-by-side (SxS) riders who demand reliable navigation, smart connectivity, and incident recording on every journey. Preloaded with offline Hema Maps for Australia and New Zealand, the HX-M1 keeps you navigating confidently far beyond mobile coverage, with on-road turn-by-turn voice guidance and off-road track guidance powered by the full Hema Nav Premium platform. The 6.2-inch sunlight-readable IPS touchscreen is water-resistant and operable in the rain, displaying navigation, maps, and front and rear camera footage in a bright, glare-resistant format. Wireless Android Auto and Apple CarPlay provide hands-free smartphone control for compatible navigation, call, message, and music apps directly on the screen, while Bluetooth music and hands-free calling deliver audio connectivity without wires. The included handlebar controller enables call accept/reject, image capture, and device control without removing hands from the bars. HD front and rear camera recording is supported via the optional HX-MICAM Dual Camera DVR Kit (sold separately or included in specific bundles), with IP67-rated cameras delivering all-weather Full HD footage and a 3D G-sensor automatically saving footage when an incident is detected. The vibration and shock resistant mount suits virtually any motorcycle or SxS with a 3-metre cable length, and additional mounting options are available. The included 3-year Hema Nav subscription covers live traffic, quarterly map updates via Wi-Fi, over 1.8 million Points of Interest including campsites, fuel stops, and caravan parks, 75 million kilometres of mapped roads and tracks, day and night display modes, track recording, and map customisation. Access to the Hema 4WD Maps app is available with a separate subscription, providing digitised Hema printed maps, regional 4WD content, route plotting, and Memory-Map integration. Note: Front and rear HD cameras are sold separately (HX-MICAM) or included in specific bundles. The Hema 4WD Maps app requires a separate subscription beyond the included 3-year Hema Nav subscription. Features & Benefits 6.2-Inch Sunlight-Readable IPS Touchscreen — water-resistant display operable in rain, showing navigation, maps, and camera footage with clear visibility in all lighting conditions Wireless Apple CarPlay and Android Auto — hands-free smartphone control for navigation, calls, messages, music, and podcasts on the 6.2-inch screen without cables Hema Nav Premium 3-Year Subscription — on-road and off-road navigation with live traffic, offline maps, 1.8M+ POI, 75M km of roads and tracks, and quarterly Wi-Fi updates Offline Map Support — preloaded Hema Maps for Australia and New Zealand enable navigation far beyond mobile coverage without internet connection Off-Road Track Guidance — safely plan and navigate remote destinations, trails, and tracks across Australia and New Zealand Handlebar Controller — accept and reject calls, capture images, and control the device hands-free without removing hands from the bars HD Front and Rear Camera Support — compatible with the HX-MICAM Dual Camera DVR Kit for Full HD front and rear incident recording (camera kit sold separately) IP67 Rear Camera Compatibility — all-weather Full HD footage in rain, mud, and harsh riding environments (with HX-MICAM) 3D G-Sensor — automatically saves footage when an incident or impact is detected Bluetooth Music and Calls — wireless audio streaming, hands-free calling, and podcast playback Separate GPS Antenna — dedicated GPS antenna for accurate location in any environment Vibration and Shock Resistant Mount — 3-metre cable length fits virtually any motorcycle or SxS; additional mounting options available 1.8M+ Points of Interest — campsites, fuel stops, caravan parks, and more across Australia and New Zealand Hema 4WD Maps App Access — digitised Hema printed maps, regional 4WD content, waypoints, and Memory-Map integration (separate subscription required) 3-Year Hema Protect Warranty — full confidence with Hema's included warranty coverage Technical Specs Specification Detail SKU HX-M1 Brand Hema Product Type Motorcycle and SxS GPS Smart Navigator Screen Size 6.2 Inch Display Type IPS, Sunlight-Readable, Water-Resistant Touch Apple CarPlay Wireless Android Auto Wireless Bluetooth Yes (Music, Calls, Podcasts) GPS Antenna Separate External Antenna G-Sensor 3D (Incident Detection) Camera Support Front and Rear HD (HX-MICAM kit required, sold separately) Camera IP Rating IP67 (with HX-MICAM) Cable Length 3 Metres Mount Vibration and Shock Resistant Hema Nav Subscription 3-Year (live traffic, quarterly updates included) Hema 4WD Maps App Accessible (separate subscription required) Points of Interest 1.8M+ (campsites, fuel, caravan parks and more) Mapped Roads and Tracks 75M km Navigation Coverage Australia and New Zealand Offline Maps Yes (preloaded) Map Updates Quarterly via Wi-Fi Day/Night Display Mode Yes Track Recording Yes Handlebar Controller Yes (included) Warranty 3-Year Hema Protect Compatible With / Goes Well With Compatible With: Motorcycles and side-by-sides (SxS). The HX-M1 is purpose-built for motorcycle and SxS mounting with a vibration and shock resistant mount and 3-metre cable length suited to virtually any motorcycle or SxS on the market. Goes well with: Hema HX-MICAM Dual Camera DVR Kit (for front and rear HD camera recording) Hema HX-Box GPS Navigation Module (for in-vehicle infotainment navigation) Frequently Asked Questions Q: Are the cameras included with the HX-M1? A: Front and rear HD cameras are not included with the standard HX-M1 and are sold separately as the Hema HX-MICAM Dual Camera DVR Kit. The HX-MICAM kit includes two Sony IMX307 1080p Full HD cameras with IP67 water and dust resistance, a 1-metre front camera cable, and a 3-metre rear camera cable. The HX-MICAM may be included in specific bundles — check the product listing at time of purchase. Q: Does the Hema 4WD Maps app require a subscription after the included trial? A: Yes. Access to the Hema 4WD Maps app requires a separate subscription and is not included in the 3-year Hema Nav subscription supplied with the HX-M1. The Hema Nav subscription covers on-road and off-road navigation, live traffic, quarterly map updates, and Points of Interest. The 4WD Maps app provides digitised Hema printed maps and regional 4WD content under its own subscription. Q: Can the HX-M1 navigate off-road without mobile coverage? A: Yes. The HX-M1 is preloaded with offline Hema Maps for Australia and New Zealand, enabling full navigation without internet connection or mobile coverage. Off-road track guidance, waypoints, and track recording are all available offline, making the HX-M1 suitable for remote touring well beyond mobile range. Q: Does the handlebar controller work for all functions? A: The included handlebar controller enables call accept and reject, image capture, and general device control without removing hands from the bars. Full touchscreen control remains available for more detailed interactions such as route input and settings adjustment when stationary. Q: Is the HX-M1 suitable for side-by-sides as well as motorcycles? A: Yes. The HX-M1 is purpose-built for both motorcycles and side-by-sides (SxS). The vibration and shock resistant mount with 3-metre cable length is designed to suit virtually any motorcycle or SxS on the market. Additional mounting options are available for specific fitment requirements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Parkmate PM-208CPA Filter Air Purifier with 3-Stage Filtration Compact 3-stage filtration air purifier with CleanAir-AI technology designed for vehicles and small spaces, removing small particles, pollen, dust, odours, and pet hair at a clean air delivery rate of up to 13 cubic metres per hour — ideal for drivers and passengers with asthma and allergies. Product Overview The Parkmate PM-208CPA is a vehicle-focused air purifier featuring a 3-stage filtration system with CleanAir-AI technology, engineered to remove airborne contaminants including fine particles, pollen, dust, odours, and pet hair from the cabin environment. Operating at a clean air delivery rate of up to 13 cubic metres per hour, the PM-208CPA is well suited to vehicles, small offices, and household spaces up to 10 square metres, providing rapid relief from airborne irritants in compact environments. Designed with drivers and passengers with asthma and allergies in mind, the PM-208CPA connects via the included USB-C cable or 12/24V car charger for flexible in-vehicle or desktop use. Genuine replacement HEPA filters are available separately for ongoing filtration performance. Note: Genuine replacement HEPA filters are sold separately. Product weight not confirmed by supplier — contact F.A.E. for shipping weight details. Features & Benefits 3-Stage Filtration System — removes small particles, pollen, dust, odours, and pet hair for cleaner, healthier cabin air CleanAir-AI Technology — intelligent air purification for efficient contaminant removal 13m3/h Clean Air Delivery Rate — purifies up to 13 cubic metres of air per hour for rapid improvement in air quality Perfect for Vehicles and Small Spaces — designed specifically for in-vehicle use and suitable for small offices and household areas up to 10m2 Asthma and Allergy Friendly — targeted filtration of common triggers including pollen, dust, and pet hair Dual Power Options — powered via included USB-C cable or 12/24V car charger for flexible use in vehicle or at a desk Compact Design — 75mm x 68mm x 200mm footprint fits discreetly in vehicle cup holders and on desktops Replacement HEPA Filters Available — genuine replacement filters sold separately for continued long-term performance Technical Specs Specification Detail SKU PM-208CPA Brand Parkmate Product Type Filter Air Purifier Filtration Stages 3 Technology CleanAir-AI Rated Voltage 5V DC Rated Power 5 Watts Applicable Area Up to 10m2 Max Air Volume 13m3 / Hour Power Input USB-C Power Supply USB-C Cable or 12/24V Car Charger (both included) Product Dimensions 75mm (W) x 68mm (D) x 200mm (H) Replacement Filters Genuine HEPA Filters (sold separately) What's in the Box 1 x Parkmate PM-208CPA Vehicle Air Purifier 1 x 12/24V Car Charger 1 x USB-C Cable 1 x User Manual Compatible With / Goes Well With Goes well with: Parkmate Genuine Replacement HEPA Filters for PM-208CPA (sold separately) Frequently Asked Questions Q: What does the 3-stage filtration system filter out? A: The PM-208CPA 3-stage filtration system removes fine airborne particles, pollen, dust, odours, and pet hair from the surrounding air. The system is designed to create a cleaner breathing environment particularly for individuals with asthma and allergies, targeting the most common airborne irritants found in vehicle cabins and small indoor spaces. Q: Is the PM-208CPA suitable for use outside of a vehicle? A: Yes. While designed specifically for in-vehicle use, the PM-208CPA is also suitable for small offices and household spaces up to 10 square metres. It can be powered via the included USB-C cable from any USB power source for desktop or home use, in addition to the included 12/24V car charger for in-vehicle operation. Q: How often do the filters need to be replaced? A: Filter replacement frequency will depend on usage and air quality conditions. Genuine replacement HEPA filters for the PM-208CPA are available separately. Regular filter replacement ensures continued purification performance over time. Refer to the included user manual for recommended replacement intervals. Q: What power source does the PM-208CPA use? A: The PM-208CPA operates at 5V DC via USB-C. The included 12/24V car charger enables direct in-vehicle connection, and the included USB-C cable can be used with any compatible USB power source for desktop or home use. Q: What is CleanAir-AI technology? A: CleanAir-AI is Parkmate's intelligent air purification technology incorporated into the PM-208CPA to enhance the efficiency and performance of the 3-stage filtration system. For detailed technical information on CleanAir-AI, refer to the included user manual or contact F.A.E.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less