Allowing You to Keep a Factory-Look Interior Inside the Vehicle! 6.5" Rear Speaker Spacer Adapters - BlackAerpro APS294R are rear door speaker spacer adapters designed specifically to suit Holden Commodore VF (2013-2017). Supplied as a pair, they are moulded to suit the rear doors of the vehicle and will line up with the original mounting holes, allowing you to install aftermarket speakers with ease - no door modifications required. They are also slim enough to allow the factory door trim to be placed back on the door, allowing you to keep a factory-look interior inside the vehicle. APS294R provides a mounting depth of 32mm and is suitable for 6.5" (165mm) aftermarket speakers. If you are looking to upgrade the speakers in your vehicle you can't go past Aerpro Vehicle Specific Speaker Spacer Adapters. Please Note: Speaker Spacer Adapters can vary between vehicle models, to find the correct part for your vehicle use the Aerpro Vehicle Selector. We recommend checking the speaker location in the vehicle before installation/purchase to ensure this product will suit your application. Aerpro APS294R Features: Enables factory vehicle speakers to be upgraded to aftermarket speakers with ease Designed for rear door installation (Left & Right) Moulded specifically to suit the vehicle, no door modifications required Factory vehicle interior remains intact, keeping the original look and feel of the vehicle Suitable for 6.5" (165mm) aftermarket speakers with a mounting depth of 32mm or less Sold in pairs, left and right Aerpro APS294R Specifications: Colour: Black Installation Point: Rear (Left & Right) Speaker: 6.5" (165mm) Maximum Ring Height: 32mm Vehicle Compatibility: Holden Commodore (2013 - 2017 VF) Weight: 0.40kg Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Axis 5" LED High Res Monitor Axis HD5120 Specifications: Type: Reversing Aid Accessories Unit of Measure: Each Warranty: Two Years Product Group 1: Batteries Chargers & Me Product Group 2: Reversing & Driving Aids Legendary Products & Support From Authorized Dealers When you choose Axis, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Axis dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Axis's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Axis dealer today!

Read more less

10mm Black Polyolefin HeatshrinkSpecifications: Type: 10 Pcs. x 300mm Long Shrink Ratio: 2:1 Operating Temperature: -50° to +125°C Shrink Temperature: 105° Packaging: Poly Bag & Header Card With Hang Hole Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less

Perfect For Use With Either The RVS50/RVS50P 5" Reverse Screens.DNA RVS50WMWindscreen Suction Cup Mount For The RVS50 & RVS50P.Specifications: Colour: Black Packaging: Bulk Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less

Anker PowerLine+ Micro 0.9m Android Smartphones USB Cable with Pouch - Red: Looks Better, Lasts Longer, and Charges Faster Powerline+ Micro USBThe Premium Durable Cable [Double Braided Nylon] for Samsung, Nexus, LG, Motorola, Android Smartphones and MoreUnrivaled DurabilityPowerLine+ maybe the last cable you’ll ever need. Proven to last at least 5 times as long as other cables and boasts a bend tolerance 10 times higher! It is simply one of the most durable cables, ever.End-to-End StrengthExceptional tensile strength is provided by a aramid fiber core,double nylon-braiding and precision laser welding. PowerLine+ is built to withstand any yanking, twisting, stretching, or dropping that it might possibly be subjected to.Customise Cable LengthIncludes an innovative felt pouch which allows you to adjust cable length for any situation. Close to your wall charger? Wind up PowerLine+ inside the pouch to avoid cables trailing across the floor.Next LevelPowerLine’s first generation boasted 5x the durability of other cables, but PowerLine II takes it to the next level. It tolerates being bent over 12,000 times and lasts an enormous 12x longer than other cables.High Speed ChargingLow quality charging cables can reduce charging speeds by over 40%. PowerLine+ is designed with a thick wire gauge which reduces resistance and ensures maximum charging speed.Anker A8142H91 Features: Lasts up to 10x longer than other cables Bulletproof Aramid Fiber Dual-layer sheating Reinforced stress points Anker A8142H91 Specifications: Type Micro USB Material Braided Nylon Durability 10000 Bends Power 2A Port Metal Pouch Yes Colour Red Length 160mm Width 100mm Height 30mm Weight (Pack) 45.3gm Weight (Net) 50gm Legendary Products & Support From Authorized Dealers When you choose Anker, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Anker dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Anker's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Anker dealer today!

Read more less

Great Performer in Tough Waters, Fish Very Close to Nature and Meet Excellent Results Clicks Prospec are Japan's leading squid jig manufacturer, Made from high quality materials these premium performing lures are available in a wide range of colours and sizes. Clicks Prospec lures are made from an ABS resin body and are super tough as well as providing excellent stability and buoyancy in the water. They are then perfectly finished with a beautifully coloured cloth body and unique eye to grab the attention of the passing squid. Features: Vertical towing eye giving faster retrieves Body: Super tough ABS resin with excellent stability and buoyancy in the water. With glowing tale band just above the needles. Needles: Dual stainless steel crowns with hardened super sharp needles Size: 3.0 (120mm includes the hook) Weight: 13.5 Grams Colour: Orange Marble Packaging: Blister and card Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

MCDODO MCH-8610 Vacuum Suction Dash-Mount Wireless Phone Charger in Dark Grey A dual-grip magnetic wireless phone charger mount for dashboards and smooth surfaces, delivering up to 15W wireless output via a combined vacuum suction and gel adhesive hold. USB-C input (5V 3A / 9V 3A), compatible with 5W, 7.5W, 10W, and 15W wireless charging standards. Foldable structure for compact storage. Constructed from PC, zinc alloy, and silicone. RoHS certified. Includes 1m USB-C to USB-C cable. Product Overview The MCDODO MCH-8610 is a dash-mount wireless phone charger that combines a vacuum suction cup and gel adhesive dual-grip system to secure the mount to dashboards and other smooth interior surfaces. The magnetic attachment system holds the phone in place against the charging pad, while the dual grip prevents the mount from shifting on the surface during driving. Wireless output is up to 15W and is compatible with 5W standard wireless charging, 7.5W for Apple devices, 10W for compatible Android devices, and 15W for fast wireless charging on supported handsets. USB-C input accepts 5V 3A and 9V 3A (max) power delivery. The foldable structure compacts the holder down for easy storage when not in use. Constructed from high-grade PC, zinc alloy, and silicone for a durable, lightweight build suited to long-term daily use. RoHS certified. Includes a 1m USB-C to USB-C cable, magnetic ring, ring positioning card, protective film, and wet and dry wipes for surface preparation. Features & Benefits Dual Grip - Vacuum Suction and Gel Adhesive: The mount uses both a vacuum suction cup and a gel adhesive pad to lock securely onto smooth dashboard and windscreen surfaces, preventing movement and vibration during driving without requiring permanent installation. Wireless Charging Up to 15W: Supports multiple wireless charging standards including 5W (standard), 7.5W (Apple), 10W (fast Android), and 15W (max fast wireless), automatically negotiating the fastest compatible charge rate for the connected device. Magnetic Phone Attachment: An included magnetic ring attaches to the back of the phone (or phone case) to align and hold the handset securely against the charging pad, preventing the phone from slipping off the mount during cornering or braking. Foldable Structure for Compact Storage: The holder folds flat into a compact form when not in use, making it easy to store in a glovebox or centre console without taking up unnecessary space in the vehicle. USB-C Input with 5V 3A / 9V 3A Support: The USB-C input accepts both 5V 3A and 9V 3A power delivery, compatible with a wide range of USB-C car chargers and power adapters. A 1m USB-C to USB-C cable is included. High-Grade PC, Zinc Alloy and Silicone Construction: The combination of polycarbonate, zinc alloy, and silicone materials delivers a durable, lightweight structure resistant to daily use, with silicone contact points protecting the vehicle surface from scratches. Technical Specs Specification Detail SKU MCH-8610 Brand MCDODO Colour Dark Grey Mount Type Vacuum Suction + Gel Adhesive Dual Grip Attachment Method Magnetic Wireless Output 5W / 7.5W / 10W / 15W Input 5V 3A / 9V 3A (max) Connector Type USB-C Materials PC, Zinc Alloy, Silicone Dimensions 74.4 x 79.2 x 37.3mm Weight 153g Certifications RoHS Compatible With / Goes Well With The MCH-8610 is compatible with all Qi wireless charging enabled smartphones, including iPhone 8 and later (7.5W), Samsung Galaxy and other fast wireless charging Android devices (10W-15W), and any Qi-compatible handset (5W). Suitable for mounting on smooth dashboard, windscreen, and centre console surfaces. Goes Well With: USB-C car charger - A compatible USB-C PD car charger (sold separately) is required to power the MCH-8610 via the included USB-C to USB-C cable Magnetic phone case - A magnetic compatible phone case allows the magnetic attachment to work without applying the included magnetic ring directly to the phone Frequently Asked Questions Does the MCH-8610 work with my phone case on? Yes, as long as the phone case is thin enough to allow wireless charging to function and is compatible with the magnetic attachment system. The included magnetic ring can be applied to the back of a case rather than the phone itself. Very thick or metal cases may reduce wireless charging efficiency or prevent the magnetic hold from working correctly. What power adapter is required to use the MCH-8610? The MCH-8610 requires a USB-C power source capable of delivering 5V 3A or 9V 3A for optimal wireless charging output. A compatible USB-C car charger (sold separately) is recommended. The 1m USB-C to USB-C cable is included in the box. How do I install the vacuum suction mount on the dashboard? Clean the mounting surface thoroughly using the included wet and dry wipes to remove dust and oil before installation. Press the mount firmly onto the surface and engage the vacuum lock to create the suction seal. The gel adhesive provides additional grip. For best results, mount on a flat, smooth surface away from textured or patterned dashboard areas. What is the maximum wireless charging speed the MCH-8610 supports? The MCH-8610 supports up to 15W wireless output for compatible devices. iPhone models charge at up to 7.5W, Samsung and compatible fast wireless Android devices charge at up to 10W-15W, and standard Qi devices charge at 5W. The charger automatically selects the fastest compatible rate for the connected device. Is the magnetic ring included and does it need to be permanently attached? Yes, one magnetic ring and ring positioning card are included to help apply it accurately to the back of the phone or case. The ring is designed to be adhered to the device using the included adhesive and is not intended to be repeatedly removed and reapplied. If you prefer not to attach the ring to your phone directly, applying it to a removable phone case is recommended.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

A compact, IP66-rated 60A circuit breaker built for automotive, marine, and 4WD electrical systems — pack of 5. Product Overview The OEX ACX2086/5 is a pack of five 60A Type 3 mini manual reset circuit breakers designed for surface-mount installation in automotive, 4WD, caravan, and marine electrical systems. Type 3 manual reset means the breaker trips automatically under fault conditions and must be manually reset to restore the circuit — with the added convenience of a switchable function, allowing the circuit to be intentionally opened and closed by the operator when needed. Rated at 32V DC and housed in UL 94V-0 thermal plastic, each breaker carries an IP66 environmental rating and meets SAE J553, SAE J1171, and UL1500 (ignition protected) compliance standards — making them suitable for fuel-system-adjacent and marine applications where ignition protection is a requirement. Stud insulators are included, and terminal lugs suit 6mm or ¼ inch hardware. At just 58.2mm × 35.7mm × 34.7mm, these are a compact, professional-grade solution for protecting high-current circuits in tight installations. Key Specifications 60A current rating 32V DC maximum voltage rating Type 3 breaker action — automatic trip on fault, manual reset required, with switchable function IP66 environmental rating — dust-tight and protected against high-pressure water jets Housing: UL 94V-0 rated thermal plastic (flame retardant) Operating temperature range: -40°C to +85°C Dimensions: 58.2mm (H) × 35.7mm (W) × 34.7mm (D) Stud type: #10-32 threaded studs Terminal / lug compatibility: 6mm or ¼ inch Protective stud insulators included Compliance: SAE J553, SAE J1171, UL1500 (ignition protected) Pack quantity: 5 units Compact mini surface-mount design 1-year OEX warranty Features & Benefits Type 3 manual reset with switchable function — Trips automatically under overload or short-circuit conditions, requiring a deliberate manual reset rather than auto-resetting unexpectedly. The switchable function also allows the operator to intentionally isolate the circuit — useful for service, maintenance, or staged installations. IP66 rated — Fully dust-tight and resistant to powerful water jets, making these breakers suitable for underbonnet, engine bay, bilge, and exterior panel installations where moisture and road spray are unavoidable in Australian conditions. SAE J553, J1171 and UL1500 compliant — Meets internationally recognised automotive and marine electrical standards, including ignition protection certification (UL1500) — essential for fuel-system-adjacent installs in boats, caravans, and 4WDs. -40°C to +85°C operating range — Handles extreme temperature swings from cold-climate starts through to underbonnet heat in outback Australian conditions without thermal degradation or nuisance tripping. UL 94V-0 flame-retardant housing — The thermal plastic housing is self-extinguishing to UL 94V-0 standard, reducing fire propagation risk in the event of a fault condition near the breaker. Compact mini form factor (58.2 × 35.7 × 34.7mm) — Surface-mounts into tight spaces on switch panels, firewall installations, and marine electrical boxes without requiring large cutouts or custom enclosures. #10-32 threaded studs with 6mm or ¼ inch lug compatibility — Standard stud size compatible with widely available automotive and marine terminal lugs, simplifying wiring without the need for specialised connectors. Pack of 5 — Ideal for workshops, fleet installers, and multi-circuit installations where consistent, professional-grade protection is needed across multiple runs. Reduces per-unit cost compared to purchasing individually. Protective stud insulators included — Prevents accidental shorting on adjacent metalwork or components without requiring additional insulation hardware. Technical Specs Part Number: ACX2086/5 Brand: OEX Type: Manual Reset Circuit Breaker Item Type: Mini Circuit Breaker Breaker Type: Manual Reset Breaker Action: Type 3 (auto-trip, manual reset, switchable) Current Rating: 60A Voltage Rating: 32V DC IP Rating: IP66 Operating Temperature: -40°C to +85°C Housing Material: Thermal plastic UL 94V-0 Dimensions: 58.2mm (H) × 35.7mm (W) × 34.7mm (D) Stud Type: #10-32 threaded Terminal Lug Compatibility: 6mm or ¼ inch Stud Insulators: Included Compliance: SAE J553, SAE J1171, UL1500 (ignition protected) Mount Type: Compact mini surface mount Pack Quantity: 5 units Warranty: 1 year Unit of Measure: Each (pack of 5) Compatible With / Goes Well With 12V and 24V automotive, 4WD, and light commercial vehicle electrical systems (rated to 32V DC) Marine and boat electrical installations requiring ignition-protected circuit breakers (UL1500) Caravan and camper trailer auxiliary electrical systems — dual battery, solar, inverter, and lighting circuits Fuel-system-adjacent applications requiring SAE J1171 ignition protection compliance High-current automotive circuits — winch, compressor, fridge, auxiliary lighting, and audio power feeds Switch panels, firewall installations, and marine electrical boxes requiring compact surface-mount breakers Multi-circuit workshop and fleet installations where consistent breaker specification is required Note: Also available as single units in 10A, 15A, 20A, 30A, 40A, 50A, and 60A. Box-of-5 packs are available in 40A, 50A, and 60A. Confirm your circuit's maximum continuous current draw before selecting the appropriate amperage rating. Weight Not specified by supplier. Frequently Asked Questions What does Type 3 manual reset mean for this circuit breaker? Type 3 means the breaker trips automatically under fault conditions and will not restore the circuit until manually reset by the operator. The switchable function also allows intentional circuit isolation for maintenance or staged commissioning — unlike auto-reset (Type 1) breakers which restore current automatically. Is this breaker suitable for marine and fuel-system installations? Yes — the ACX2086/5 carries UL1500 ignition-protected certification and meets SAE J1171, making it compliant for use in marine bilge areas and fuel-system-adjacent automotive and caravan applications where ignition protection is a safety requirement. What amperage options are available in this pack format? Box-of-5 packs are available in 40A, 50A, and 60A. If you need a different amperage, single-unit options are available across 10A, 15A, 20A, 30A, 40A, 50A, and 60A in the OEX mini circuit breaker range. What terminal lugs are compatible with these breakers? The #10-32 threaded studs accept terminal lugs sized for 6mm or ¼ inch hardware, which are widely available standard sizes across automotive, marine, and electrical supply outlets. Protective stud insulators are included in the pack. Can these breakers be used in both 12V and 24V systems? Yes — the breakers are rated to 32V DC, making them compatible with both 12V and 24V electrical systems found in passenger vehicles, 4WDs, trucks, caravans, and marine applications. Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Flexible bendable magnetic phone mount with 180° adjustable arm for optimal viewing angles Product Overview The McDodo MCM6270 is a flexible magnetic phone holder featuring a bendable aluminium-TPU arm enabling 180° positioning adjustment for dashboard or windscreen mounting in vehicles. Unlike rigid phone mounts locked to fixed angles, the MCM6270's memory aluminium gooseneck maintains position under phone weight while allowing infinite angle adjustment throughout its 180° range—positioning the phone precisely where drivers need it without blocking critical dashboard controls or obstructing windscreen visibility. The magnetic attachment system secures MagSafe-compatible iPhones (iPhone 12 and later) or Android phones fitted with magnetic adapter rings, while the 3M VHB adhesive suction base provides permanent dashboard mounting without clamps, vents, or complicated brackets. The dual-axis magnetic head (360° rotation plus 90° tilt) combines with the bendable arm to achieve viewing angles impossible with conventional ball-joint or fixed-arm mounts, particularly valuable for vehicles with awkward dashboard geometry, deep-set windscreens, or unconventional driver positions common in imported RHD conversions or commercial vehicles. Key Specifications Model: McDodo MCM6270 Type: Bendable magnetic phone holder with dashboard/windscreen mounting Arm type: Flexible gooseneck with memory aluminium core and TPU sleeve Arm adjustment: 180° bendable positioning (maintains set position) Magnetic head: Dual-axis (360° rotation + 90° tilt adjustment) Mounting: 3M VHB adhesive suction base for dashboard/windscreen Phone attachment: Magnetic (MagSafe compatible or magnetic ring required) Materials: ABS base, PC magnetic head, TPU-coated aluminium flexible arm Dimensions: 227mm × 58.2mm × 32.1mm Weight: 129.4g Compatibility: MagSafe iPhones (12/13/14/15/16 series), Android phones with magnetic adapter rings Detachable: Magnetic phone attachment detaches from base for handheld filming/viewing Features & Benefits 180° bendable gooseneck arm constructed from memory aluminium core with TPU protective sleeve enables infinite positioning adjustment throughout its range—bend the arm to position phone precisely where needed, avoiding dashboard vents, steering wheel obstruction, or windscreen wiper zones that fixed-arm mounts can't accommodate in vehicles with challenging interior layouts. Dual-axis magnetic head combines 360° rotation with 90° tilt adjustment providing six-axis total positioning capability when combined with the flexible arm—achieves viewing angles impossible with conventional single-pivot ball-joint mounts, particularly critical for navigating complex intersections requiring quick glances at maps without extended focus away from traffic. Strong 3M VHB suction base provides permanent adhesive mounting to dashboard surfaces (textured or smooth) or windscreens without clamps, brackets, or vent clips—maintains stable mounting through corrugations, emergency braking, and temperature cycling common to Australian vehicle environments where adhesive-only solutions typically fail without industrial-grade VHB tape. MagSafe magnetic attachment secures iPhones (12 and later) or Android phones with magnetic adapter rings through strong magnetic grip—enables one-handed phone mounting and removal while driving, critical safety advantage over spring-clamp or cradle mounts requiring two hands and visual attention to align phone with holder arms. Detachable design allows removing the phone-and-mount from the base for handheld filming, desktop viewing, or bed-side use—transforms car mount into versatile phone stand for video calls, recipe viewing, or content consumption beyond vehicle applications, maximizing value versus single-purpose car-only mounts. Memory aluminium construction in the flexible arm maintains bent position under phone weight without sagging over time—unlike cheap wire-core goosenecks that gradually droop, the MCM6270's aluminium core holds position through temperature changes and vibration, ensuring once-set viewing angle remains consistent over months of daily use. Compact 227mm total length fits dashboard mounting spaces without excessive protrusion into cabin—the relatively short gooseneck (versus 300mm+ arms on some flexible mounts) reduces leverage forces on the adhesive base during vibration, improving mounting stability while maintaining sufficient positioning range for most dashboard geometries. TPU protective sleeve over the flexible arm prevents scratching dashboard surfaces during positioning adjustments and protects the aluminium core from corrosion—particularly important in coastal regions where salt air accelerates metal corrosion or in vehicles with soft-touch dashboard materials easily damaged by exposed metal components. Technical Specs Part number: McDodo MCM6270 Model: MCM6270 Product type: Flexible magnetic phone holder with dashboard/windscreen mount Flexible arm specifications: Core material: Memory aluminium (retains bent shape) Sleeve material: TPU (thermoplastic polyurethane) protective coating Adjustment range: 180° bendable positioning Arm length: Approximately 150-170mm flexible section (based on 227mm total dimension) Magnetic head specifications: Rotation: 360° continuous Tilt: 90° adjustment Magnetic pattern: MagSafe-compatible ring magnet Phone compatibility: MagSafe iPhones, Android phones with magnetic adapter rings Base specifications: Mounting method: 3M VHB (Very High Bond) adhesive suction Surface compatibility: Dashboard (textured/smooth), windscreen glass Base dimensions: 58.2mm × 32.1mm (from overall dimensions) Materials: Base: ABS (Acrylonitrile Butadiene Styrene) plastic Magnetic head: PC (Polycarbonate) plastic Flexible arm: Aluminium core with TPU sleeve Overall dimensions: 227mm (length) × 58.2mm (width) × 32.1mm (height) Weight: 129.4g (complete assembly) Load capacity: Suitable for smartphones up to 250g (typical large smartphone weight) Temperature tolerance: -20°C to +70°C (typical for automotive interior components) Detachment: Magnetic phone attachment lifts off base for handheld use Installation: Adhesive stick-on (surface preparation recommended) Compatible With / Goes Well With MagSafe iPhones (iPhone 12, 12 Pro, 12 Pro Max, 12 Mini, 13, 13 Pro, 13 Pro Max, 13 Mini, 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max, 16, 16 Plus, 16 Pro, 16 Pro Max) Android smartphones with magnetic adapter rings (McDodo PC1620 or similar) MagSafe phone cases (Apple and third-party) Dashboard surface cleaners for proper adhesive bonding Alcohol wipes for pre-installation surface preparation Magnetic adapter rings for non-MagSafe phones Wireless charging car mounts (if magnetic grip alone insufficient for charging) GPS navigation apps (Google Maps, Waze, Apple Maps) Dash cam apps utilizing phone cameras Weight 129.4g (complete assembly with base and flexible arm) Frequently Asked Questions Will the bendable arm hold its position with heavy phones? Yes, the memory aluminium core maintains bent position under typical smartphone weights (up to 250g). However, extremely heavy phone-case combinations (particularly rugged cases with pop-sockets or battery cases) may cause gradual drooping over weeks. For best results, use reasonably thin cases and avoid excessive add-on accessories. Can I install this on textured dashboards? The 3M VHB adhesive bonds to both smooth and textured dashboards, though smooth surfaces provide stronger adhesion. For heavily textured dashboards, clean the surface thoroughly with alcohol, press firmly for 30 seconds during installation, and allow 24 hours before use for full adhesive curing. Some extreme textures may require aftermarket adhesive adaptor pads. Does this work with thick phone cases? MagSafe magnetic grip strength decreases with case thickness. Cases under 3mm work well. Thick rugged cases (OtterBox Defender, Spigen Tough Armor) exceeding 3-4mm thickness significantly weaken magnetic hold—the phone may detach during bumps or emergency braking. For thick cases, consider MagSafe-compatible versions with built-in magnets designed for the extra thickness. Can I move this between vehicles? The 3M VHB adhesive is designed for permanent installation. Removal typically requires heat (hair dryer) and careful prying, and will likely damage the adhesive pad requiring replacement (not included). The magnetic phone/head assembly detaches for handheld use, but the adhesive base remains vehicle-mounted. Purchase multiple bases if mounting in multiple vehicles. Will this block my dashboard vents or controls? The bendable arm's flexibility specifically addresses this—position the arm to route around dashboard obstacles like air vents, stereo controls, or gauge clusters. This is the MCM6270's primary advantage over fixed-arm mounts that either block controls or can't mount at all in vehicles with complex dashboard layouts. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Fast charging meets durability in this premium USB-C to Lightning cable built for daily punishment. The Mcdodo MCA2850 is a 1.2-metre USB-C to Lightning cable engineered for Power Delivery (PD) fast charging up to 36W. Designed for iPhone and iPad users who need reliable charging and data sync in vehicles, homes, or workshops, this cable supports both CarPlay and Android Auto connectivity when paired with compatible head units. The reversible connectors eliminate fumbling in dark cabins, while the reinforced nylon braiding and aluminium alloy housings withstand the bending, twisting, and cable management chaos of daily use. Five thick inner core wires ensure stable 3A current delivery without voltage drop, making it suitable for fast-charging newer iPhones (iPhone 8 and later with PD support) or maintaining older devices. USB 2.0 data transfer speeds handle music libraries, photos, and firmware updates without issue. Key Specifications Cable Length: 1.2m Connector Type: USB Type-C (male) to Lightning (male) Maximum Power: 36W (USB Power Delivery) Maximum Current: 3A Data Transfer: USB 2.0 standard (480 Mbps) Connector Material: Aluminium alloy housings Cable Material: Nylon braided outer sheath Inner Cores: 5 thick copper wires for stable charging Colour: Black and grey Compatibility: iPhone 5 and later, iPad (4th gen and later), iPod Touch (5th gen and later) Features: Reversible connectors, strain relief design, overheat protection Packaging: Display hang box Features & Benefits 36W PD Fast Charging: Charge compatible iPhones (iPhone 8 through iPhone 15 series) at maximum supported speeds. A dead iPhone 14 can reach 50% in approximately 30 minutes when paired with a 20W+ USB-C PD charger—ideal for quick top-ups before heading out. CarPlay and Android Auto Ready: The 1.2m length is perfect for connecting smartphones to aftermarket head units without excess cable clutter in the cabin. Reliable data sync ensures CarPlay navigation and audio streaming stay glitch-free on corrugated roads or long highway runs. Reversible Connectors: Both USB-C and Lightning ends plug in either way up. No more fishing around in dark footwells or fumbling behind dashboards during installs. Reinforced Construction: Upgraded SR (strain relief) design at both connector ends prevents the cable sheath from splitting—the most common failure point in cheap cables. Nylon braiding resists abrasion from rubbing against centre consoles, door cards, or tool drawers. Stable 3A Current Delivery: Five thick inner copper cores maintain consistent power delivery even during high-demand charging. No throttling or overheating when fast-charging while using GPS navigation or streaming music. Overheat Protection: Built-in safeguards prevent excessive heat buildup during fast charging, protecting both your device and the cable. Safe to leave plugged in overnight or during extended drives. Aluminium Alloy Durability: The connector housings won't crack or deform like cheaper plastic alternatives. Handles being stepped on, dropped, or jammed into tight spaces without structural damage. Workshop and Trade Tough: Soft-touch nylon braiding won't snag on rough surfaces, and the 1.2m length provides enough reach for vehicle installs without being too long to manage in tight engine bays or behind dashboards. Technical Specs Cable Length: 1.2m Connector A: USB Type-C (male, reversible) Connector B: Lightning (male, 8-pin, reversible) Power Output: 36W maximum (USB Power Delivery 3.0) Current Rating: 3A maximum Data Transfer Rate: USB 2.0 (up to 480 Mbps) Inner Conductors: 5-core copper wire Outer Sheath: Nylon braided Connector Housing: Aluminium alloy Strain Relief: Upgraded SR design at both ends Safety Features: Overheat protection, overcurrent protection Colour: Black body with grey accents Operating Temperature: -10°C to 45°C (estimated) Packaging: Display hang box (retail packaging) Frequently Asked Questions **Will this fast charge my iPhone? ** Yes, if you have an iPhone 8 or later and pair it with a USB-C PD charger (20W or higher). Older iPhones charge at standard speeds. **Does it work with iPad? ** Yes. Compatible with all iPads featuring a Lightning port (4th generation onward). Supports fast charging on iPad Pro models with PD chargers. **Can I use this for data transfer? ** Yes. Supports USB 2.0 speeds (480 Mbps) for syncing photos, music, and backups via iTunes/Finder or transferring files to a computer. **Is 1.2m long enough for in-car use? ** Yes. The 1.2m length suits most vehicle layouts, reaching from dashboard-mounted head units to centre console phone holders or cup holder mounts without excessive slack. **Will it work with my USB-C car charger? ** Yes, provided your car charger supports USB Power Delivery (PD). Standard USB-C chargers without PD will charge at slower speeds (typically 5V/2.4A maximum). Compatibility Note: Fast charging requires a USB-C Power Delivery (PD) charger. Standard USB-C chargers without PD will charge devices at slower rates. iPhone 7 and older models do not support PD fast charging. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Echomaster CA-FLTR Universal Camera Power Filter Ensure a stable, clean power supply to your aftermarket reverse camera with the Echomaster CA-FLTR Universal Camera Power Filter — designed to eliminate interference and improve image quality. The Echomaster CA-FLTR Power Filter stabilizes the power signal from your vehicle’s reverse light circuit to provide a consistent and clean power source for aftermarket reverse cameras. Many modern vehicles use Pulse Width Modulation (CANBUS-controlled) to monitor taillights, which can cause unstable power and poor camera image quality. The CA-FLTR ensures your backup camera receives solid power, prevents electrical interference, and makes installation easier without running additional wires. Key Features & Benefits: Stabilizes Power Supply: Ensures your aftermarket reverse camera receives a consistent power signal. Reduces Electrical Noise: Prevents interference from CANBUS-controlled power circuits. No Extra Wiring Needed: Eliminates the need to run additional wires to power the camera. Universal Compatibility: Works with any vehicle equipped with an aftermarket camera. Easy Installation: Connects directly to the reverse light circuit for a simple plug-and-play setup. Technical Specifications: Model: CA-FLTR SKU: CA-FLTR Type: Camera Power Filter Compatibility: Universal — works with any vehicle Function: Stabilizes power supply for aftermarket reverse cameras Installation: Connects to the reverse light power circuit What's Included in the Kit: Camera Power Filter User Manual Installation Applications: Backup Camera Installations: Ensures stable power for aftermarket reverse cameras. CANBUS Vehicles: Eliminates interference caused by pulse-width modulation systems. Universal Use: Compatible with all vehicle makes and models. Frequently Asked Questions What does this power filter do?It stabilizes the power signal to your aftermarket reverse camera, preventing interference. Is it compatible with all vehicles?Yes, the CA-FLTR is designed to work universally with any vehicle. Does it work with factory cameras?No, this module is intended for aftermarket reverse camera installations. Is additional wiring required?No, it connects directly to your existing reverse light circuit. Does it affect CANBUS systems?No, it works alongside CANBUS-controlled vehicles without disrupting other functions.

Read more less

MCDODO MMC-4631 10,000mAh Budget Power Bank - 2x USB-A Outputs Reliable portable charging solution with dual USB-A outputs and smart safety protection The MCDODO MMC-4631 10,000mAh Budget Power Bank provides convenient portable charging with dual USB-A output ports for simultaneous device charging. This power bank features LED battery indicators, polymer lithium battery technology, and built-in smart chip protection against overcharging, overheating, and short circuits. The compact 16.3mm profile and 228g weight make it ideal for daily carry and travel use. Designed as a cost-effective replacement for the MMC-1360 model, this power bank delivers 10.5W maximum output while maintaining compatibility with smartphones, tablets, headphones, smartwatches, and other USB-A devices. The USB-C input provides convenient recharging with modern charging cables. MCDODO MMC-4631 Key Features & Benefits: Dual Device Charging: Two USB-A ports allow simultaneous charging of multiple devices for time efficiency LED Battery Indicators: Visual power level display prevents unexpected power depletion during use Smart Safety Protection: Built-in chip provides overcharge, overheat, and short circuit protection Polymer Battery Technology: High-quality battery ensures efficient operation and long-lasting performance Compact Design: 16.3mm thickness and 228g weight provide portability without bulk Universal Compatibility: Powers smartphones, tablets, headphones, smartwatches, and USB accessories Technical Specifications: Model: MCDODO MMC-4631 SKU: MMC-4631 Capacity: 10,000mAh Battery Type: Polymer lithium battery Input: USB-C 5V 2A Output: Dual USB-A ports, 5V 2.1A total, 10.5W max Dimensions: 142 x 67.3 x 16.3mm Weight: 228g Material: ABS and PC plastic construction Colour: Black Indicators: LED battery level display Protection: Overcharge, overheat, short circuit protection Charging Capacity Examples: iPhone 13 Mini: Approximately 2 full charges Xiaomi 9: Approximately 2 full charges Huawei P30: Approximately 1.5 full charges Multiple Small Devices: Extended power for headphones, smartwatches, and accessories Installation Applications: Daily Commuting: Reliable backup power for phones and devices during travel Travel & Tourism: Extended device usage during flights, tours, and remote locations Work & Study: Emergency charging for essential devices during long days Outdoor Activities: Portable power for GPS devices, cameras, and communication equipment Emergency Preparedness: Backup power during outages or emergency situations Frequently Asked Questions How many times can it charge my iPhone? Depends on iPhone model - typically 1.5-2.5 full charges for most recent iPhone models. Can I charge two phones at the same time? Yes, dual USB-A ports allow simultaneous charging, though total output is shared between devices. How long does it take to recharge the power bank? With USB-C 5V 2A input, approximately 5-6 hours for full recharge from empty. Is it safe to leave devices charging overnight? Yes, built-in smart chip protection prevents overcharging and overheating. Will it work with my tablet? Yes, compatible with tablets and other USB-A devices, though charging speed may vary based on device requirements.

Read more less