Amplified Hyundai and Kia SWC Harness Camera Retention, USB and Antenna Included Product Overview The Aerpro ASHY26C is a vehicle-specific wiring harness for amplified Hyundai and Kia models, combining a steering wheel control (SWC) interface, reverse camera retention, USB retention, and antenna adaptor. It is the amplified variant designed specifically for Hyundai and Kia vehicles with a factory amplified audio system. Non-amplified variants require a different harness. Hyundai and Kia vehicles are built on shared platforms under the Hyundai Motor Group, which is why a single kit can address both brands. Confirm the correct fitment for your specific model and year using the Aerpro Vehicle Selector. Features & Benefits Amplified Hyundai and Kia models only — specifically for vehicles with factory amplified audio; non-amplified Hyundai/Kia variants require a different harness Covers both Hyundai and Kia — Hyundai and Kia share platforms under the Hyundai Motor Group, allowing a single harness to address both brands in compatible specifications SWC interface included — retains factory steering wheel audio controls with a compatible aftermarket head unit Reverse camera retention included — carries over factory reverse camera signal to the aftermarket head unit; requires RCA reverse camera input on the head unit USB retention included — carries over factory USB input; requires rear USB input on the aftermarket head unit Antenna adaptor included — bridges the factory Hyundai/Kia antenna to the standard aftermarket DIN aerial input Use Aerpro Vehicle Selector to confirm fitment — the product title does not specify which Hyundai or Kia models or years are covered Technical Specs Specification Detail Vehicle Hyundai & Kia — amplified variants; confirm model and year using the Aerpro Vehicle Selector Includes SWC interface + camera retention + USB retention + antenna adaptor Amplified models Yes — amplified only; non-amplified requires different harness Interface type Not specified — confirm with Aerpro Patch lead type Not specified — confirm with Aerpro Output feeds Not specified — confirm with Aerpro Weight 0.30kg Compatible With / Goes Well With Hyundai vehicles with factory amplified audio — confirm specific model and year using the Aerpro Vehicle Selector Kia vehicles with factory amplified audio — confirm specific model and year using the Aerpro Vehicle Selector Not compatible with non-amplified Hyundai or Kia variants — a different harness is required SWC-compatible aftermarket head units Aftermarket head units with RCA reverse camera input — required for camera retention Aftermarket head units with rear USB input — required for USB retention Use the Aerpro Vehicle Selector to confirm fitment before purchasing Weight 0.30kg Frequently Asked Questions Why does one harness suit both Hyundai and Kia? Hyundai and Kia are both part of the Hyundai Motor Group and share vehicle platforms, wiring architecture, and head unit connector standards across many model lines. Where a particular Hyundai model and its Kia platform-sibling use the same factory wiring configuration, a single Aerpro harness can address both brands. Is this for amplified or non-amplified Hyundai/Kia models? This harness is specifically for amplified models. Non-amplified Hyundai and Kia variants have different wiring requirements and need a different harness. Confirm your vehicle's audio system specification (amplified or not) and use the Aerpro Vehicle Selector to ensure you select the correct part. Which Hyundai and Kia models does this suit? The available supplier data does not specify which models or years are covered. Use the Aerpro Vehicle Selector with your specific vehicle make, model, and year to confirm whether the ASHY26C is correct before purchasing. What else do I need for a complete installation? At minimum, an SWC-compatible aftermarket head unit with RCA reverse camera input and rear USB input is needed to use all the retention features of this harness. An ISO wiring harness (such as the Aerpro APP8) and a vehicle-specific facia panel may also be required. Confirm all installation requirements with your installer or Aerpro. Is full technical specification data available for the ASHY26C? The available data covers the product name, the four included components, the amplified designation, and the weight. Interface type, patch lead type, output feeds, and specific vehicle compatibility are not confirmed in the current supplier data. Contact Aerpro directly for complete technical specifications before purchasing.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AACH4C SWC Harness for Jeep with Steering Wheel Control, Camera Retention, and Antenna A SWC harness from Aerpro for compatible Jeep vehicles, the AACH4C retains factory steering wheel controls, factory camera, and factory antenna when installing an aftermarket head unit, with a vehicle-specific plug for direct connection without cutting factory wiring and patch lead type H compatibility. A compatible SWC patch lead is required separately for SWC function. Product Overview The Aerpro AACH4C is a SWC harness type H designed for compatible Jeep vehicles, combining steering wheel control retention, factory camera retention, and factory antenna retention in a single harness assembly to simplify aftermarket head unit installation. The vehicle-specific plug connects directly into the existing factory wiring without cutting or modifying the original harness. The included antenna adaptor converts the factory Jeep antenna connection to a standard DIN plug suitable for aftermarket head units. Factory camera retention allows the factory reverse camera to be retained on compatible aftermarket head units with a reverse camera input. A compatible type H SWC patch lead is required separately for steering wheel control function. Use the Aerpro Vehicle Selector at aerpro.com to confirm compatibility with your specific Jeep vehicle and factory configuration before purchase. Features & Benefits Retains Factory Steering Wheel Controls: Enables retention of factory steering wheel audio controls when upgrading to a compatible aftermarket head unit, keeping hands on the wheel and eyes on the road. Factory Camera Retention: Retains the factory reverse camera in compatible Jeep vehicles when connected to a compatible aftermarket head unit with a reverse camera input. Factory Antenna Retention: The included antenna adaptor converts the factory Jeep antenna connection to a standard DIN plug for connection to the aftermarket head unit without additional hardware. Vehicle-Specific Plug - No Cutting of Factory Wiring: The harness plugs directly into the factory Jeep wiring connector without cutting, splicing, or permanently modifying the original wiring harness. Patch Lead Type H Compatibility: The AACH4C uses type H patch lead compatibility for connection to compatible aftermarket head units via a separately purchased type H SWC patch lead. Single Harness Assembly for Complete Jeep Installations: Combining SWC, camera retention, and antenna in a single harness reduces the number of individual adaptors required for Jeep head unit upgrade installations. Technical Specs Specification Detail SKU AACH4C Brand Aerpro Category SWC Harness Type H Compatible Brand Jeep SWC Retention Yes Camera Retention Yes OEM Antenna Retention Yes (Adaptor Included) Patch Lead Type H SWC Patch Lead Required Yes (Type H, Sold Separately) Compatible With Compatible with select Jeep vehicles. SWC harnesses vary between models. Use the Aerpro Vehicle Selector at aerpro.com to confirm compatibility with your specific Jeep vehicle before purchase. The aftermarket head unit must be SWC compatible and have a reverse camera input for camera retention. Steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the AACH4C require a SWC patch lead? Yes. A compatible type H SWC patch lead is required separately for the steering wheel control function to operate with the aftermarket head unit. Does the AACH4C retain the factory reverse camera? Yes. The AACH4C includes factory camera retention for compatible Jeep vehicles when connected to a compatible aftermarket head unit with a reverse camera input. Does the AACH4C retain the factory antenna? Yes. The AACH4C includes an antenna adaptor that converts the factory Jeep antenna connection to a standard DIN plug for the aftermarket head unit. Does the AACH4C require cutting the factory wiring harness? No. The vehicle-specific plug connects directly into the factory Jeep wiring without cutting or modifying the original harness. Is the AACH4C compatible with all Jeep vehicles? No. SWC harnesses vary between models. Use the Aerpro Vehicle Selector at aerpro.com to confirm compatibility with your specific Jeep vehicle before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Hyundai and Kia Analogue SWC Interface Pure Steering Wheel Control Retention, No Additional Outputs or Integration Product Overview The Aerpro ASHY5C is an analogue steering wheel control interface for various Hyundai and Kia vehicles. It retains factory steering wheel audio controls and provides an illumination output that is its complete scope. Unlike CANBUS interfaces, the ASHY5C uses an analogue resistive interface suited to older Hyundai and Kia models where the SWC system uses a voltage-based resistive ladder rather than digital CANBUS data. There are no reverse trigger, park brake, speed pulse, or amp remote outputs. No factory camera, USB, AUX, antenna, amplifier, or vehicle menu integration is provided. The ASHY5C is a targeted solution for vehicles where SWC retention is the only requirement. The harness uses a vehicle-specific plug connecting directly to the factory Hyundai/Kia wiring without cutting. For a complete installation, pair with the optional Aerpro APP8 Head Unit Secondary ISO Harness (sold separately). Features & Benefits Analogue SWC interface — uses resistive voltage-based signal translation rather than CANBUS digital decoding; suited to Hyundai and Kia models with analogue SWC systems Hyundai and Kia compatible — vehicle-specific plug; no cutting of factory wiring required SWC retention only — retains factory steering wheel audio controls; no additional vehicle feature retention is provided by this interface Illumination output — automatic display dimming when vehicle lights are on; the only output provided alongside SWC No reverse trigger, park brake, or speed pulse outputs — buyers requiring these outputs should consider a different interface No camera, USB, AUX, antenna, or amplifier retention — if any of these are required, this interface is not suitable; a more comprehensive interface or a separate adaptor kit is needed Pairs with Aerpro APP8 harness (sold separately) — the APP8 Head Unit Secondary ISO Harness provides clean ISO connectivity between the ASHY5C and the aftermarket head unit Technical Specs Specification Detail Interface type Analogue Patch lead type H Outputs Reverse trigger No Park brake No Speed pulse No Illumination Yes Amp remote No Telephone mute No Other Retention SWC Yes OEM reverse camera No OEM amplifier No OEM AUX input No OEM USB input No OEM antenna No Vehicle menus No Compatible With / Goes Well With Hyundai vehicles with analogue SWC systems — confirm specific model and year using the Aerpro Vehicle Selector Kia vehicles with analogue SWC systems — confirm specific model and year using the Aerpro Vehicle Selector SWC-compatible aftermarket head units — required for steering wheel control retention Aerpro APP8 Head Unit Secondary ISO Harness (sold separately) — recommended for ISO connectivity Weight Not specified Frequently Asked Questions What is an analogue SWC interface and how does it differ from CANBUS? In an analogue (resistive) SWC system, each button on the steering wheel connects to the head unit via a single wire, and each button press changes the resistance value on that wire — the head unit reads the voltage and identifies which button was pressed. In a CANBUS system, SWC data is transmitted as digital packets on the vehicle's data bus. Analogue interfaces (like the ASHY5C) are simpler and suited to older vehicles; CANBUS interfaces (like the ASHY26C) are required for newer vehicles using digital SWC signal transmission. What does this interface retain — what is not included? The ASHY5C retains factory steering wheel audio controls and provides an illumination output. It does not retain or provide: reverse camera, reverse trigger output, park brake output, speed pulse output, factory USB, factory AUX, factory antenna, factory amplifier, or vehicle menu access. It is a SWC-only interface. How does the ASHY5C compare to the ASHY26C? The ASHY26C is an amplified Hyundai/Kia harness that includes SWC, camera retention, USB retention, and antenna adaptor. The ASHY5C is a much simpler analogue SWC-only interface with illumination output and no additional retention. The ASHY26C covers amplified models requiring a more comprehensive integration package; the ASHY5C suits older analogue SWC models where only SWC retention is needed. Which Hyundai and Kia models use analogue SWC? Analogue SWC was common in Hyundai and Kia vehicles built roughly before 2012–2015, before CANBUS SWC became standard. Models such as older Hyundai Santa Fe, Tucson, Elantra, and Kia Sportage, Sorento, and Cerato generations used resistive analogue SWC. Use the Aerpro Vehicle Selector to confirm whether your specific vehicle requires the ASHY5C or a CANBUS interface. Is this the right interface if I also want to retain my reverse camera? No — the ASHY5C does not provide reverse camera retention or a reverse trigger output. If reverse camera retention is required, you need a different interface such as the ASHY26C or a separate camera retention adaptor. Confirm the correct complete solution using the Aerpro Vehicle Selector.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AEM1R 9.66" Digital E-Mirror with Rear AHD 1080P DVR Camera A 9.66" IPS touch screen digital e-mirror from Aerpro, the AEM1R replaces the factory rearview mirror with a 1920x480, 1000 nit display delivering a live AHD 1080P rear camera feed from the included Sony STARVIS 2 rear camera, built-in DVR recording at 1080P 30FPS with automatic impact-triggered event saving, automatic brightness adjustment, reverse-triggered camera switching with parking guidelines, flip-to-mirror switch, MicroSD support up to 256GB, IP69 rated rear camera, 12-24V compatibility, universal mirror mount, 8-metre camera cable, and a 5-year warranty. Product Overview The Aerpro AEM1R is a complete factory rearview mirror replacement system designed specifically for utes, 4WDs, and vans where a canopy, camper, or tray obstructs the factory mirror view. Unlike clip-over solutions, the AEM1R replaces the factory mirror entirely using a purpose-built mounting bracket for a clean, integrated in-cabin appearance. The 9.66" IPS touch screen at 1920x480 resolution with 1000 nit brightness and automatic brightness adjustment remains clearly visible in direct sunlight and low-light conditions, providing constant rear visibility through the live AHD 1080P camera feed. The included rear camera uses a Sony STARVIS 2 image sensor for sharp, detailed footage in both daytime and low-light conditions, rated IP69 for full protection against high-pressure wash-down. When reverse gear is selected, the display automatically switches to the rear camera view with on-screen parking guidelines. A flip switch allows instant reversion to a conventional mirror view at any time. An integrated clock and date display remains on screen at all times. The built-in DVR records continuously in 1080P HD at 30FPS with automatic impact-triggered event saving to protect critical footage during incidents. MicroSD cards up to 256GB are supported (Class 10 required, sold separately). Installation is simplified with the included 8-metre camera cable and universal mirror mount. Compatible with 12V and 24V vehicles. For dual front and rear camera coverage, refer to the Aerpro AEM2R. Note: the included mount is a universal fit. A vehicle-specific mount may be required for correct fitment in some vehicles and is sold separately. Visit aerpro.com or scan the QR code on pack to confirm compatibility before purchase. Backed by a 5-year warranty. Features & Benefits True Mirror Replacement - Clean Integrated Appearance: The AEM1R replaces the factory rearview mirror entirely using a purpose-built mounting bracket, delivering a clean factory-integrated appearance rather than a clip-over solution. 9.66" IPS Touch Screen - 1920x480 Resolution: The wide 9.66" IPS touch screen at 1920x480 resolution delivers a clear, wide image across the full mirror footprint for maximum rear visibility coverage. 1000 Nit Super Bright Display with Automatic Brightness Adjustment: The 1000 nit display remains clearly visible in direct sunlight, and automatic brightness adjustment adapts to ambient light levels for comfortable viewing in all conditions without manual intervention. Sony STARVIS 2 Image Sensor - Exceptional Day and Night Performance: The included rear camera uses a Sony STARVIS 2 image sensor for sharp, detailed AHD 1080P footage in both daytime and challenging low-light conditions. Constant Live Rear Camera Feed - Eliminates Canopy and Camper Blind Spots: The live AHD 1080P rear camera feed replaces the obstructed factory mirror view, restoring clear rear sightlines for utes, 4WDs, and vans fitted with full canopies, campers, and trays. Built-In DVR - Continuous 1080P Loop Recording at 30FPS: The built-in DVR records continuously in 1080P HD at 30FPS with automatic impact-triggered event saving to protect critical footage during incidents. MicroSD Support Up to 256GB: Supports MicroSD cards up to 256GB (Class 10 required, sold separately) for extended recording sessions. Reverse-Triggered Camera Switching with Parking Guidelines: The display automatically switches to the rear camera view with on-screen parking guidelines when reverse gear is selected for precision manoeuvring. Flip to Conventional Mirror View: A flip switch instantly reverts the display from live camera feed to a conventional mirror view when preferred. IP69 Rated Rear Camera: The rear camera is IP69 rated for full protection against dust and high-pressure, high-temperature water jet exposure, suited to exposed exterior mounting positions on working vehicles. Integrated Clock and Date Display: The clock and date remain visible on screen at all times alongside the camera feed. 12-24V Compatible: Suitable for 12V passenger vehicles and 24V commercial vehicles. 8-Metre Camera Cable Included: The 8-metre rear camera cable provides sufficient reach for routing through full-length canopies and tray body installations. 5-Year Industry-Leading Warranty: Backed by Aerpro's 5-year warranty for long-term confidence in working vehicle applications. What's in the Box 1 x Aerpro AEM1R 9.66" Digital E-Mirror 1 x AHD 1080P Rear Camera 1 x Universal Mirror Mount 1 x 8M Camera Cable Note: MicroSD card sold separately (Class 10, up to 256GB). Vehicle-specific mount may be required and is sold separately. Technical Specs Specification Detail SKU AEM1R Brand Aerpro Display Size 9.66" Display Type IPS Touch Screen Monitor Resolution 1920 x 480 Camera Resolution AHD 1080P Image Sensor Sony STARVIS 2 Screen Brightness 1000 Nit Brightness Adjustment Automatic Camera Inputs 1 (Rear) Rear Camera IP Rating IP69 DVR Recording Yes - 1080P at 30FPS Impact Event Saving Yes (Automatic) MicroSD Support Up to 256GB (Class 10, Sold Separately) Trigger Input Reverse Trigger (Auto Camera Display and Parking Guidelines) Mirror Mode Flip Switch to Conventional Mirror View On-Screen Display Clock and Date Power Supply 12-24V DC Camera Cable Length 8 Metres Dimensions Confirm with supplier Warranty 5 Years Barcode 9317114953018 Compatible With The AEM1R is compatible with 12V and 24V vehicles. The included universal mirror mount suits many vehicles. A vehicle-specific mount may be required for correct fitment and is sold separately. Visit aerpro.com or scan the QR code on pack to confirm compatibility and available vehicle-specific mounts before purchase. A Class 10 MicroSD card up to 256GB is required for DVR recording and is sold separately. For dual front and rear camera coverage, refer to the Aerpro AEM2R. Frequently Asked Questions What is the difference between the AEM1R and the AEM2R? Both share the same 9.66" IPS touch screen, Sony STARVIS 2 rear camera, DVR recording, 1000 nit display, IP69 rating, and 5-year warranty. The AEM1R includes a single rear camera only for rear-only DVR recording. The AEM2R adds an included AHD 1080P front camera for simultaneous dual-channel front and rear DVR recording. Choose the AEM2R for comprehensive front and rear coverage; choose the AEM1R for rear-only coverage. Does the AEM1R record automatically? Yes. The built-in DVR records continuously in 1080P HD at 30FPS in loop recording mode. Automatic impact-triggered event saving protects critical footage during incidents by locking it from being overwritten. What MicroSD card is required for DVR recording? A Class 10 MicroSD card up to 256GB is required. The MicroSD card is sold separately and is not included in the box. Does the AEM1R switch automatically to the rear camera when reversing? Yes. When reverse gear is selected, the display automatically switches to the rear camera view and on-screen parking guidelines appear to assist with precision manoeuvring. Is a vehicle-specific mount required? The included mount is a universal fit that suits many vehicles. A vehicle-specific mount may be required for correct fitment in some vehicles and is available separately. Visit aerpro.com to confirm compatibility and check available vehicle-specific mounts before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AMGM5 9" Multimedia Receiver Complete Kit Holden Barina TM 2011-2016 A complete 9" head unit upgrade kit from Aerpro for Holden Barina TM (2011-2016) vehicles without the factory MyLink system, the AMGM5 includes the AM9X multimedia receiver with wireless Apple CarPlay, Android Auto, Bluetooth V4.2, and 50W x 4 output, plus a silver fascia kit, SWC interface harness, and antenna adaptor. Retains steering wheel controls and parking tones. Product Overview The Aerpro AMGM5 is a vehicle-specific complete head unit upgrade kit for Holden Barina TM (2011-2016), supplied with everything required to complete the installation and retain important factory vehicle features. This kit suits non-MyLink models only. The included AM9X multimedia receiver features a 9" capacitive (G+G) touchscreen at 1024x600 resolution, wireless and wired Apple CarPlay and Android Auto, Bluetooth V4.2+EDR with HD Voice (HFP 1.6), AM/FM with RDS, 50W x 4 maximum output, 5-channel 4V RCA preouts, and 8-band graphic EQ with time alignment. Two rear USB inputs provide media playback and CarPlay/Android Auto connectivity. Dual camera inputs (AHD 720P compatible) and a rear A/V input are included on the head unit. Vehicle feature retention covers steering wheel controls and parking tones. Factory reverse camera, USB input, and AUX input retention are not supported. Note: this unit is also compatible with factory navigation Barina TM models, however access to vehicle menus, personalisation settings, and climate visuals displayed on the factory screen will be lost after installation. These settings can be configured on the factory unit before removal but will not be accessible via the AMGM5. Features & Benefits Complete Head Unit Upgrade Kit - All Installation Parts Included: The AMGM5 includes the AM9X multimedia receiver, silver fascia kit, SWC interface harness, and antenna adaptor. No additional parts are required to complete the installation. Wireless Apple CarPlay and Android Auto: Access maps, music, calls, and messages via the touchscreen without plugging in the phone. Wired connection is also supported for simultaneous charging. Bluetooth V4.2 with HD Voice - Hands-Free Calling and Audio Streaming: Bluetooth V4.2+EDR supports A2DP, AVRCP, HFP 1.6 (HD Voice), and PBAP for hands-free calling, wireless audio streaming, and phonebook access. Both built-in and external microphones are included. 9" Capacitive Touchscreen - 1024x600 Resolution: Smooth, responsive G+G capacitive touch control for navigation, media, and settings. 50W x 4 Maximum Output with 5-Channel 4V RCA Preouts: 50W x 4 maximum output with 5-channel 4V RCA preouts (front, rear, subwoofer) for connection of aftermarket amplifiers. 8-Band Graphic EQ with Time Alignment and Subwoofer Control: 8-band graphic EQ at 50Hz, 200Hz, 400Hz, 800Hz, 1kHz, 3kHz, 7kHz, and 15kHz with 8 preset EQ modes, time alignment, and subwoofer LPF control. Dual Rear USB Inputs: USB1 supports CarPlay, Android Auto, and media playback. USB2 supports media playback. Both supply 5V/1.5A charging. Dual Camera Inputs (AHD 720P Compatible) and Rear A/V Input: Two 720P AHD compatible camera inputs and a rear RCA A/V input are included on the head unit for camera and video source connection. Steering Wheel Control and Parking Tones Retention: The SWC interface harness retains factory steering wheel controls. Parking tones are retained. AM/FM Radio with RDS: AM/FM tuning with RDS and 30 preset stations (18 FM, 12 AM) for full broadcast radio coverage. What's in the Box AM9X 9" Fixed Multimedia Receiver (2 DIN Short Body) Silver Fascia Kit Steering Wheel Control Interface Harness Antenna Adaptor Power Harness with ISO/SWC Plug AV-In Cable (RCA with Audio L/R and Video In) Reverse Camera Input Cable (with 12V power supply to camera) 4.1CH Audio Out Cable External Microphone Technical Specs Specification Detail SKU AMGM5 Brand Aerpro Compatible Vehicle Holden Barina TM (2011-2016) - Non-MyLink Models Head Unit Model AM9X Screen Size 9" Resolution 1024 x 600 Touchscreen Capacitive (G+G) OS / CPU Linux 3.4.5 / SPHE8368U RAM / Flash 128MB / 256MB DIN Format 2 DIN Short Body Apple CarPlay Yes (Wireless and Wired) Android Auto Yes (Wireless and Wired) DAB+ No AM/FM Presets AM 12 / FM 18 FM Range 87.5-108.0MHz (0.05MHz Step) AM Range 529-1629KHz (9KHz Step) RDS Yes Bluetooth V4.2+EDR (A2DP, AVRCP, HFP 1.6, PBAP) Microphone Built-In and External Rated Power Output 4 x 25W at 4Ω (14.4V, 1kHz, THD 10%) Max Power Output 4 x 50W RCA Preouts 4V, 5-Channel (Front/Rear/Subwoofer) EQ 8-Band (50/200/400/800/1K/3K/7K/15KHz) Preset EQs 8 (Default, Custom, Classic, Rock, Jazz, Electric, Pop, Soft) Time Alignment Yes Subwoofer LPF Yes USB1 (Rear) CarPlay/Android Auto + Media + Charging (5V/1.5A) USB2 (Rear) Media + Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Formats MP3, AAC, FLAC, Xvid, MPEG 1/2/4 Reverse Camera Input Yes (720P AHD Compatible) Second Camera Input Yes (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 Piece) Composite Video Output Yes Button Illumination White SWC Retention Yes Parking Tones Retention Yes Reverse Camera Retention No USB Input Retention No AUX Input Retention No Factory Amplifier Retention N/A Vehicle Menu Not Retained Barcode 9317114941121 Vehicle Feature Retention Feature Retained Steering Wheel Controls Yes Parking Tones Yes Factory Reverse Camera No USB Input No AUX Input No Factory Amplifier N/A Vehicle Menu No Compatible With Make Model Variant Years Holden Barina TM (Non-MyLink) 2011-2016 Note: Suits Holden Barina TM (2011-2016) without factory MyLink system. Compatible with factory navigation models however vehicle menus, personalisation settings, and climate visuals displayed on the factory screen are not accessible after installation. These settings should be configured on the factory unit before removal. Confirm your specific Barina variant using the Aerpro What Fits Your Car Guide before purchase. Frequently Asked Questions Does the AMGM5 suit Holden Barina TM models with factory MyLink? No. The AMGM5 is designed for Holden Barina TM (2011-2016) vehicles without the factory MyLink system. For MyLink equipped models, refer to the Aerpro What Fits Your Car Guide for the correct kit. Does the AMGM5 support wireless CarPlay and Android Auto? Yes. The AM9X supports both wireless and wired Apple CarPlay and Android Auto. Does the AMGM5 retain factory steering wheel controls? Yes. The included SWC interface harness retains factory steering wheel controls. Will the AMGM5 work in a factory navigation Barina TM? Yes, the AMGM5 is physically compatible with factory navigation models. However, vehicle menus, personalisation settings, and climate visuals that appear on the factory screen will not be accessible after installation. These should be configured on the factory unit before it is removed. Does the AMGM5 include DAB+ digital radio? No. The AM9X does not include DAB+. AM and FM radio with RDS is included.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AEM2R 9.66" Digital E-Mirror with Front and Rear AHD 1080P DVR Cameras A 9.66" IPS touch screen digital e-mirror from Aerpro, the AEM2R replaces the factory rearview mirror with a 1920x480, 1000 nit display delivering a live AHD 1080P rear camera feed from the included Sony STARVIS 2 rear camera, simultaneous AHD 1080P front camera recording, built-in dual-channel DVR at 1080P (rear at 30FPS, front at 25FPS), automatic brightness adjustment, reverse-triggered camera switching with parking guidelines, flip-to-mirror switch, MicroSD support up to 256GB, IP69 rated rear camera, 12-24V compatibility, universal mirror mount, 8-metre camera cable, and a 5-year warranty. Product Overview The Aerpro AEM2R is a complete factory rearview mirror replacement system designed specifically for utes, 4WDs, and vans where a canopy, camper, or tray obstructs the factory mirror view. Unlike clip-over solutions, the AEM2R replaces the factory mirror entirely using a purpose-built mounting bracket for a clean, integrated in-cabin appearance. The 9.66" IPS touch screen at 1920x480 resolution with 1000 nit brightness and automatic brightness adjustment remains clearly visible in direct sunlight and low-light conditions, providing constant rear visibility through the live AHD 1080P camera feed. The included rear camera uses a Sony STARVIS 2 image sensor for sharp, detailed footage in both daytime and low-light conditions, rated IP69 for full protection against high-pressure wash-down. When reverse gear is selected, the display automatically switches to the rear camera view with on-screen parking guidelines. A flip switch allows instant reversion to a conventional mirror view at any time. An integrated clock and date display remains on screen at all times. The AEM2R steps ahead of single-camera e-mirror solutions with an included AHD 1080P front camera that records simultaneously with the rear, providing comprehensive front and rear coverage in a single integrated system. The built-in dual-channel DVR records continuously in 1080P HD (rear at 30FPS, front at 25FPS) with automatic impact-triggered event saving to protect critical footage. MicroSD cards up to 256GB are supported (Class 10 required, sold separately). Installation is simplified with the included 8-metre camera cable and universal mirror mount. Compatible with 12V and 24V vehicles. Note: the included mount is a universal fit. A vehicle-specific mount may be required for correct fitment in some vehicles and is sold separately. Visit aerpro.com or scan the QR code on pack to confirm compatibility before purchase. Backed by a 5-year warranty. Features & Benefits True Mirror Replacement - Clean Integrated Appearance: The AEM2R replaces the factory rearview mirror entirely using a purpose-built mounting bracket, delivering a clean factory-integrated appearance rather than a clip-over solution. 9.66" IPS Touch Screen - 1920x480 Resolution: The wide 9.66" IPS touch screen at 1920x480 resolution delivers a clear, wide image across the full mirror footprint for maximum rear visibility coverage. 1000 Nit Super Bright Display with Automatic Brightness Adjustment: The 1000 nit display remains clearly visible in direct sunlight, and automatic brightness adjustment adapts to ambient light levels for comfortable viewing in all conditions without manual intervention. Sony STARVIS 2 Image Sensor - Exceptional Day and Night Performance: The included rear camera uses a Sony STARVIS 2 image sensor for sharp, detailed AHD 1080P footage in both daytime and challenging low-light conditions. Constant Live Rear Camera Feed - Eliminates Canopy and Camper Blind Spots: The live AHD 1080P rear camera feed replaces the obstructed factory mirror view, restoring clear rear sightlines for utes, 4WDs, and vans fitted with full canopies, campers, and trays. Dual AHD 1080P Camera Inputs - Front and Rear Coverage: Both a front and rear AHD 1080P camera are included, providing comprehensive front and rear coverage from a single integrated system without requiring additional cameras. Built-In Dual Channel DVR - Continuous Loop Recording: The built-in DVR records continuously in 1080P HD across both cameras simultaneously (rear at 30FPS, front at 25FPS), with automatic impact-triggered event saving to protect critical footage during incidents. MicroSD Support Up to 256GB: Supports MicroSD cards up to 256GB (Class 10 required, sold separately) for extended dual-channel recording sessions. Reverse-Triggered Camera Switching with Parking Guidelines: The display automatically switches to the rear camera view with on-screen parking guidelines when reverse gear is selected for precision manoeuvring. Flip to Conventional Mirror View: A flip switch instantly reverts the display from live camera feed to a conventional mirror view when preferred. IP69 Rated Rear Camera: The rear camera is IP69 rated for full protection against dust and high-pressure, high-temperature water jet exposure, suited to exposed exterior mounting positions on working vehicles. Integrated Clock and Date Display: The clock and date remain visible on screen at all times alongside the camera feed. 12-24V Compatible: Suitable for 12V passenger vehicles and 24V commercial vehicles. 8-Metre Camera Cable Included: The 8-metre rear camera cable provides sufficient reach for routing through full-length canopies and tray body installations. 5-Year Industry-Leading Warranty: Backed by Aerpro's 5-year warranty for long-term confidence in working vehicle applications. What's in the Box 1 x Aerpro AEM2R 9.66" Digital E-Mirror 1 x AHD 1080P Rear Camera 1 x AHD 1080P Front Camera 1 x Universal Mirror Mount 1 x 8M Camera Cable Note: MicroSD card sold separately (Class 10, up to 256GB). Vehicle-specific mount may be required and is sold separately. Technical Specs Specification Detail SKU AEM2R Brand Aerpro Display Size 9.66" Display Type IPS Touch Screen Monitor Resolution 1920 x 480 Camera Resolution AHD 1080P (Front and Rear) Image Sensor Sony STARVIS 2 Screen Brightness 1000 Nit Brightness Adjustment Automatic Camera Inputs 2 (Front and Rear) Rear Camera IP Rating IP69 DVR Recording Yes - Dual Channel 1080P Rear Camera Recording 1080P at 30FPS Front Camera Recording 1080P at 25FPS Impact Event Saving Yes (Automatic) MicroSD Support Up to 256GB (Class 10, Sold Separately) Trigger Input Reverse Trigger (Auto Camera Display and Parking Guidelines) Mirror Mode Flip Switch to Conventional Mirror View On-Screen Display Clock and Date Power Supply 12-24V DC Camera Cable Length 8 Metres Dimensions Confirm with supplier Warranty 5 Years Barcode 9317114953025 Compatible With The AEM2R is compatible with 12V and 24V vehicles. The included universal mirror mount suits many vehicles. A vehicle-specific mount may be required for correct fitment and is sold separately. Visit aerpro.com or scan the QR code on pack to confirm compatibility and available vehicle-specific mounts before purchase. A Class 10 MicroSD card up to 256GB is required for DVR recording and is sold separately. Frequently Asked Questions Does the AEM2R record both front and rear cameras simultaneously? Yes. The built-in dual-channel DVR records both the included front and rear AHD 1080P cameras simultaneously - rear at 30FPS and front at 25FPS - in continuous loop recording mode, with automatic impact-triggered event saving. What MicroSD card is required for DVR recording? A Class 10 MicroSD card up to 256GB is required for DVR recording. The MicroSD card is sold separately and is not included in the box. Does the AEM2R switch automatically to the rear camera when reversing? Yes. When reverse gear is selected, the display automatically switches to the rear camera view and on-screen parking guidelines appear to assist with precision manoeuvring. What is the difference between the AEM2R and a clip-over e-mirror? The AEM2R replaces the factory rearview mirror entirely using a purpose-built mounting bracket, providing a clean factory-integrated appearance. Clip-over solutions attach to the existing mirror and can be bulkier or less secure. The included universal mount suits many vehicles; a vehicle-specific mount may be required for some vehicles and is sold separately. Is the AEM2R compatible with 24V commercial vehicles? Yes. The AEM2R operates from 12-24V DC, making it compatible with both 12V passenger vehicles and 24V commercial vehicles including light trucks and vans. Is a vehicle-specific mount required? The included mount is a universal fit that suits many vehicles. A vehicle-specific mount may be required for correct fitment in some vehicles and is available separately. Visit aerpro.com to confirm compatibility and check available vehicle-specific mounts before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AKTGM5 9" Head Unit Installation Kit for Holden Barina TM 2011-2016 A 9" trapezoid head unit installation kit from Aerpro for Holden Barina TM (2011-2016) vehicles without factory MyLink, the AKTGM5 includes a silver fascia kit, SWC interface harness, SWC patch lead, and antenna adaptor, retaining steering wheel controls including phone button and parking tones. Compatible with Alpine INE-AW409S, INE-AX809, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, Aerpro AM9X, and various Android 9" trapezoid head units. Head unit not included. Product Overview The Aerpro AKTGM5 is a vehicle-specific 9" head unit installation kit for Holden Barina TM (2011-2016), providing all the hardware required to install a 9" trapezoid shaped head unit into the Barina TM without the factory MyLink system. The kit suits universal trapezoid shaped head units only and will not suit standard DIN or double DIN sized radios. The head unit is sold separately. The silver fascia kit is purpose-designed for the Holden Barina TM dashboard. The SWC interface harness and included SWC patch lead retain factory steering wheel controls including the phone button and parking tones. The antenna adaptor connects the factory Holden Barina TM antenna to the aftermarket head unit. An Aerpro APP8 Secondary ISO Harness is recommended separately to simplify installation; the head unit ISO harness is not included in this kit. Note: this kit does not support Pioneer CAN Bus features. When installing with a Pioneer head unit, select Menu then Steering Wheel Control then With Adapter at boot-up rather than CAN Bus Adapter. Feature retention is radio dependent and may vary between compatible head units. Features & Benefits Compatible with Multiple 9" Trapezoid Head Unit Brands: The AKTGM5 is compatible with Alpine INE-AW409S and INE-AX809, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, Aerpro AM9X, and various Android 9" trapezoid head units, providing installation flexibility across multiple head unit choices. Silver Fascia Kit for Holden Barina TM: The silver fascia kit is purpose-designed for the Holden Barina TM (2011-2016) dashboard for a clean, integrated finish around the new 9" head unit. SWC Harness and Patch Lead - Steering Wheel Control Retention Including Phone Button: The SWC interface harness and patch lead retain factory steering wheel controls including the phone button in the Holden Barina TM. Parking Tones Retention: Factory parking tones are retained where equipped. Antenna Adaptor Included: Connects the factory Holden Barina TM antenna to the aftermarket head unit without additional hardware. Recommended Pairing with Aerpro APP8: Installation is simplified when paired with the Aerpro APP8 Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWC harness. Suits 9" Trapezoid Shaped Head Units Only: This kit is developed for universal trapezoid shaped 9" radios. It will not suit standard DIN or double DIN sized radios. What's in the Box Silver Fascia Kit Steering Wheel Control Interface Harness SWC Patch Lead Antenna Adaptor Note: Head unit not included. Head unit ISO harness not included. Aerpro APP8 Secondary ISO Harness recommended separately. Technical Specs Specification Detail SKU AKTGM5 Brand Aerpro Compatible Vehicle Holden Barina TM (2011-2016) - Non-MyLink Models Compatible Head Unit Size 9" Trapezoid Only SWC Retention Yes (Including Phone Button) Parking Tones Retention Yes Reverse Camera Retention No USB Input Retention No AUX Input Retention No Factory Amplifier Retention No Vehicle Menu No Head Unit ISO Harness Not Included (APP8 Recommended Separately) Barcode 9317114953094 Compatible Head Units Brand Model Alpine INE-AW409S Alpine INE-AX809 Kenwood DMX80AXS Pioneer DMH-AP6650BT Aerpro AM9X Various Android 9" Trapezoid Head Units Note: Pioneer CAN Bus features are not supported. When installing with a Pioneer head unit, at boot-up navigate to Menu, then Steering Wheel Control, then With Adapter rather than selecting CAN Bus Adapter. Vehicle Feature Retention Feature Retained Steering Wheel Controls (Including Phone Button) Yes Parking Tones Yes Factory Reverse Camera No USB Input No AUX Input No Factory Amplifier No Vehicle Menu No Compatible With Make Model Variant Years Holden Barina TM (Non-MyLink) 2011-2016 Note: This kit suits 9" trapezoid shaped head units only and will not suit standard DIN or double DIN radios. Feature retention is radio dependent and may vary between compatible head units. The head unit ISO harness is not included; the Aerpro APP8 Secondary ISO Harness is recommended separately. Confirm suitability using the Aerpro What Fits Your Car Guide before purchase. Frequently Asked Questions Does the AKTGM5 include a head unit? No. The AKTGM5 is an installation kit only and does not include a head unit. Compatible 9" trapezoid head units including the Aerpro AM9X, Alpine INE-AW409S, Alpine INE-AX809, Kenwood DMX80AXS, and Pioneer DMH-AP6650BT are sold separately. Does the AKTGM5 include the ISO wiring harness? No. The head unit ISO harness is not included. The Aerpro APP8 Secondary ISO Harness is recommended separately to simplify installation and is sold separately. Does the AKTGM5 work with Pioneer head units? Yes, but Pioneer CAN Bus features are not supported. When installing with a Pioneer head unit, navigate to Menu then Steering Wheel Control then With Adapter at boot-up rather than selecting CAN Bus Adapter. Does the AKTGM5 suit factory MyLink Barina TM models? No. The AKTGM5 suits Holden Barina TM (2011-2016) vehicles without the factory MyLink system. Will the AKTGM5 suit a standard double DIN head unit? No. This kit is developed for 9" trapezoid shaped head units only and will not suit standard DIN or double DIN sized radios.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro FP9617 Double DIN Fascia Kit Porsche Macan 2015-2020 Black A vehicle-specific Double DIN fascia kit for the Porsche Macan (2015-2020), the FP9617 is manufactured from high-quality ABS plastic with a scratch-resistant matte black finish designed to match the original dashboard look and feel, and is supplied with plastic brackets and installation instructions. Product Overview The Aerpro FP9617 is a Double DIN stereo installation fascia kit designed specifically for the Porsche Macan from 2015-2020. It is engineered to allow the installation of a standard Double DIN aftermarket radio into the original Macan dashboard opening. The kit is manufactured from high-quality ABS plastic with a scratch-resistant matte black painted finish designed to match the original look and feel of the Macan dashboard. Plastic brackets and all necessary hardware parts are included alongside detailed installation instructions. Features & Benefits Porsche Macan 2015-2020 Specific Fitment: The FP9617 is engineered specifically for the Porsche Macan from 2015-2020, providing a factory-like fit and finish for Double DIN aftermarket radio installations in this model. Double DIN Aperture for Original Dashboard Location: The FP9617 accommodates any standard Double DIN aftermarket radio, allowing installation into the original Porsche Macan dashboard opening without modification. Scratch-Resistant Matte Black Painted Finish: The matte black finish is scratch-resistant and designed to match the original look and feel of the Porsche Macan dashboard, providing a factory-consistent appearance after installation. High-Quality ABS Plastic Construction: The FP9617 is manufactured from high-quality ABS plastic for an original factory-like fit and finish and long-term durability in the in-vehicle environment. Plastic Brackets and Hardware Included: Plastic brackets and all necessary hardware parts are included alongside detailed installation instructions, supporting a complete and straightforward installation. Technical Specs Specification Detail SKU FP9617 Brand Aerpro Compatible Vehicles Porsche Macan 2015-2020 Application Double DIN Colour Matte Black Material High-Quality ABS Plastic Inclusions Plastic Brackets, Hardware, Installation Instructions What's in the Box Matte Black Double DIN Fascia Kit Plastic Brackets Hardware Parts Detailed Installation Instructions Compatible With The FP9617 is designed for the Porsche Macan from 2015-2020 with a Double DIN head unit installation. Confirm your specific Macan variant and build date before purchase. Frequently Asked Questions Does the FP9617 include mounting brackets? Yes. The FP9617 is supplied with plastic brackets and all necessary hardware parts alongside detailed installation instructions. Is the FP9617 compatible with Single DIN head units? No. The FP9617 provides a Double DIN aperture and is designed for standard Double DIN aftermarket radios only. Does the FP9617 include wiring harnesses or steering wheel control adaptors? No. The FP9617 is a fascia kit only. Wiring harnesses, steering wheel control interfaces, and antenna adaptors need to be sourced separately for a complete installation. What finish does the FP9617 have? The FP9617 is painted in scratch-resistant matte black, designed to match the original look and feel of the Porsche Macan dashboard. Is the FP9617 compatible with all Porsche Macan variants from 2015-2020? The FP9617 is confirmed compatible with the Porsche Macan from 2015-2020. Confirm your specific variant and build date before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB24 Bonnet Mount UHF Antenna Bracket Toyota Landcruiser 300 Series An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Landcruiser 300 Series (2021-on), the APVCBB24 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB24 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Landcruiser 300 Series 2021-On Specific Design: The APVCBB24 is engineered specifically for the Toyota Landcruiser 300 Series from 2021 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB24 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Toyota Landcruiser 300 Series. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB24 is Australian designed and engineered for the specific requirements of the Toyota Landcruiser 300 Series platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB24 Brand Aerpro Compatible Vehicles Toyota Landcruiser 300 Series, 2021-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB24 is designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific LC300 variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB24 require drilling or vehicle modification? No. The APVCBB24 mounts to the passenger side bonnet hinge using the Toyota Landcruiser 300 Series existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB24 affect bonnet operation or window wipers? No. The APVCBB24 is designed specifically for the Toyota Landcruiser 300 Series bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB24 accept? The APVCBB24 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB24 compatible with the earlier Toyota Landcruiser 200 Series? No. The APVCBB24 is designed specifically for the Toyota Landcruiser 300 Series from 2021 onwards. Owners of the Landcruiser 200 Series should refer to the APVCBB5 (bonnet hinge mount) or APVCBB18 (mirror mount) instead. Is an antenna included with the APVCBB24? No. The APVCBB24 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AMAVW3 10" Multimedia Receiver Kit Volkswagen Various 2006-2015 A complete 10" head unit upgrade kit for Volkswagen Eos (2007-2014), Passat (2006-2015), Polo (2010-2015), Scirocco (2009-2014), and Tiguan (2008-2014) vehicles with White MFD, the AMAVW3 includes the AM10X Multimedia Receiver with wireless Apple CarPlay and Android Auto, matte black fascia kit, Infodaptor Interface harness, SWC patch lead, amplifier retention harness, and antenna adaptor, retaining steering wheel controls, factory amplified system, parking tones, and vehicle menu access. Product Overview The Aerpro AMAVW3 is a 10" multimedia receiver upgrade kit designed for Volkswagen Eos (2007-2014), Passat (2006-2015), Polo (2010-2015), Scirocco (2009-2014), and Tiguan (2008-2014) vehicles fitted with White MFD only. The kit is built around the Aerpro AM10X Multimedia Receiver, which features a 10" 1024x600 capacitive touchscreen, wireless and wired Apple CarPlay and Android Auto, built-in Bluetooth V4.2 with A2DP, AVRCP, HFP 1.6, and PBAP profiles, AM/FM tuner with RDS, dual rear USB inputs, 50W x 4 maximum power output, 8-band graphic EQ with time alignment, and 4V 5-channel RCA pre-outs including a subwoofer output. The included Infodaptor Interface harness enables vehicle information including climate control and parking visualisation to be displayed and accessed on the aftermarket head unit, retains steering wheel controls with phone button, retains the factory amplified system, and retains parking tones and vehicle menu access. The Interface connects to the rear camera input on the AM10X; output for this kit will be low resolution. High-definition camera resolution will be reduced when using this product. Important fitment notes by model: Passat (2006-2015) - kit covers part of the hazard or clock on some models. Polo (2010-2015) - kit covers part of buttons. Scirocco (2009-2014) - kit covers vent adjusters. Tiguan (2008-2014) - kit partially covers the hazard button. Use the Aerpro What Fits Your Car Guide to confirm correct parts for your specific vehicle before purchase. Features & Benefits Complete Head Unit Upgrade Kit for VW Eos, Passat, Polo, Scirocco, and Tiguan: The AMAVW3 includes all components required to complete a 10" head unit installation in the supported Volkswagen models in a single purchase. Suits White MFD equipped vehicles only. 10" Capacitive Touchscreen Display at 1024x600: The AM10X features a 10" G+G capacitive touchscreen at 1024x600 resolution for accurate touch response and clear display across all connected functions including CarPlay, Android Auto, and the native head unit interface. Wireless and Wired Apple CarPlay and Android Auto: The AM10X supports both wireless and wired Apple CarPlay and Android Auto, providing full smartphone integration without requiring a cable connection for compatible devices. Infodaptor Interface - Vehicle Feature Retention: The included Infodaptor Interface harness retains steering wheel controls with phone button, factory amplified system, parking tones, and vehicle menu access. Climate control and parking visualisation are displayed on the aftermarket head unit where equipped. The Interface connects via the rear camera input and output will be low resolution. Steering Wheel Control Retention Including Phone Button: Factory steering wheel audio controls and the phone button are retained via the Infodaptor Interface harness and included SWC patch lead, maintaining hands-on-the-wheel control with the aftermarket head unit. Factory Amplified System Retention: The included amplifier retention harness retains the factory amplified system in the vehicle, preserving the factory speaker and amplifier configuration after the head unit upgrade. 50W x 4 Maximum Power with 8-Band Graphic EQ and Time Alignment: The AM10X delivers 25W x 4 RMS at 10% THD and 50W x 4 maximum output at 4 ohms, with an 8-band graphic EQ at 50Hz, 200Hz, 400Hz, 800Hz, 1kHz, 3kHz, 7kHz, and 15kHz, eight preset EQ profiles, loudness, and time alignment for comprehensive onboard audio tuning. 4V 5-Channel RCA Pre-Outs with Subwoofer Output: The AM10X provides 4V 5-channel RCA pre-outs including front, rear, and subwoofer outputs with adjustable subwoofer level control for external amplifier integration. Bluetooth V4.2 with External Microphone: Built-in Bluetooth V4.2 with A2DP, AVRCP, HFP 1.6, and PBAP profiles supports wireless audio streaming, hands-free calling, and phone book access. An external microphone is included alongside the built-in microphone. Dual Rear USB Inputs with Media Playback: Two rear USB inputs support MP3, AAC, FLAC, Xvid, and MPEG 1/2/4 media playback. USB 1 supports CarPlay, Android Auto, and media playback; USB 2 supports media playback. Both provide 5V/1.5A charging output. Maximum USB capacity is FAT32 32GB. Dual AHD 720P Camera Inputs: The AM10X provides two camera inputs compatible with 720P AHD cameras and includes a reverse camera input with 12V power supply output for the camera. AM/FM Tuner with RDS: An AM/FM tuner with RDS provides 18 FM presets (6x3) and 12 AM presets (6x2) across standard Australian frequency ranges. Matte Black Fascia Kit and Antenna Adaptor Included: The included matte black fascia kit provides a factory-fit appearance around the AM10X in the supported Volkswagen dashboard, and the antenna adaptor ensures correct connection between the factory antenna and the AM10X. Technical Specs Specification Detail SKU AMAVW3 Brand Aerpro Compatible Vehicles VW Eos 2007-2014, VW Passat 2006-2015, VW Polo 2010-2015, VW Scirocco 2009-2014, VW Tiguan 2008-2014 MFD Requirement White MFD only Head Unit Model AM10X Display Size 10" Display Resolution 1024 x 600 Touchscreen Capacitive G+G OS / CPU Linux 3.4.5 / SPHE8368U RAM / Flash Memory 128MB / 256MB DIN Size 2 DIN Short Body Rated Power 25W x 4 (4 Ohm, 1kHz, 10% THD) Max Power 50W x 4 (4 Ohm) RCA Pre-Outs 4V, 5-Channel (Front, Rear, Subwoofer) EQ 8-Band Graphic (50/200/400/800/1K/3K/7K/15KHz) EQ Presets 8 (Default, Custom, Classic, Rock, Jazz, Electric, Pop, Soft) Time Alignment Yes Apple CarPlay Yes (Wireless and Wired) Android Auto Yes (Wireless and Wired) Bluetooth Version V4.2 + EDR Bluetooth Profiles A2DP, AVRCP, HFP 1.6, PBAP Microphone Built-In and External (included) USB 1 (Rear) CarPlay, Android Auto, Media Playback (5V/1.5A) USB 2 (Rear) Media Playback (5V/1.5A) USB Max Capacity FAT32 32GB Media Formats MP3, AAC, FLAC, Xvid, MPEG 1/2/4 Reverse Camera Input Yes (720P AHD compatible, 12V power output) Second Camera Input Yes (720P AHD compatible) Rear A/V Input Yes (RCA, 3-piece) Composite Video Output Yes AM/FM Tuner Yes, with RDS FM Presets 18 (6x3) AM Presets 12 (6x2) FM Range 87.5-108.0MHz (0.05MHz steps) AM Range 529-1629kHz (9kHz steps) Infodaptor Interface Yes (vehicle info, SWC, amp retention, parking tones, vehicle menu) SWC Retention Yes (including phone button) Factory Amp Retention Yes Parking Tones Yes Vehicle Menu Yes Reverse Camera Retention No Camera Output Resolution Low resolution (Infodaptor Interface via rear camera input) Fascia Colour Matte Black Antenna Adaptor Included What's in the Box AM10X Multimedia Receiver Matte Black Fascia Kit Infodaptor Interface Harness SWC Patch Lead Amplifier Retention Harness Antenna Adaptor External Microphone Power Harness (ISO/3.5mm jack) AV-In Cable (RCA with Audio L/R and Video In) 4.1CH Audio Out Cable Compatible With The AMAVW3 is designed for Volkswagen Eos (2007-2014), Passat (2006-2015), Polo (2010-2015), Scirocco (2009-2014), and Tiguan (2008-2014) vehicles fitted with White MFD only. The following fitment notes apply by model: Passat (2006-2015) - kit covers part of the hazard or clock on some models; Polo (2010-2015) - kit covers part of buttons; Scirocco (2009-2014) - kit covers vent adjusters; Tiguan (2008-2014) - kit partially covers the hazard button. The Infodaptor Interface output connects via the rear camera input and will be low resolution. High-definition camera resolution will be reduced when using this product. Use the Aerpro What Fits Your Car Guide to confirm the correct parts for your specific vehicle and build date before purchase. Frequently Asked Questions Does the AMAVW3 suit all Volkswagen models in the specified date ranges? The AMAVW3 suits Volkswagen Eos (2007-2014), Passat (2006-2015), Polo (2010-2015), Scirocco (2009-2014), and Tiguan (2008-2014) with White MFD only. Important fitment notes apply for each model regarding dashboard button coverage due to the size of the 10" head unit. Use the Aerpro What Fits Your Car Guide to confirm the correct parts for your specific vehicle before purchase. What is the Infodaptor Interface and what does it retain? The Infodaptor Interface is a vehicle-specific harness included in the AMAVW3 that enables vehicle information including climate control and parking visualisation to be displayed and accessed on the AM10X. It retains steering wheel controls with phone button, the factory amplified system, parking tones, and vehicle menu access. The Interface connects to the rear camera input on the AM10X and output will be low resolution. Does the AMAVW3 retain the factory reverse camera? No. The AMAVW3 does not retain the factory reverse camera. A new aftermarket camera can be connected to the AM10X's dedicated reverse camera input, which is 720P AHD compatible and provides 12V power output to the camera. Will a high-definition aftermarket camera display at full resolution with the AMAVW3? No. Due to the Infodaptor Interface connecting via the rear camera input, high-definition camera resolution will be reduced when using this product. Does the AMAVW3 support wireless CarPlay and Android Auto? Yes. The AM10X supports both wireless and wired Apple CarPlay and Android Auto, providing full smartphone integration without requiring a cable connection for compatible devices.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AMAVW5 10" Multimedia Receiver Kit Volkswagen Various MIB-PQ A complete 10" head unit upgrade kit for Volkswagen Amarok (2016-on), Beetle (2015-2016), Caddy (2015-2020), Multivan (2016-2019), Tiguan (2015-2016), and Transporter (2016-2019) vehicles fitted with a factory MIB-PQ unit, the AMAVW5 includes the AM10X Multimedia Receiver with wireless Apple CarPlay and Android Auto, matte black fascia kit, Infodaptor Interface harness, SWC patch lead, and antenna adaptor, retaining steering wheel controls, factory amplified system, parking tones, and vehicle menu access. Product Overview The Aerpro AMAVW5 is a 10" multimedia receiver upgrade kit designed for Volkswagen Amarok (2016-on), Beetle (2015-2016), Caddy (2015-2020), Multivan (2016-2019), Tiguan (2015-2016), and Transporter (2016-2019) vehicles fitted with the factory MIB-PQ unit. The kit is built around the Aerpro AM10X Multimedia Receiver, which features a 10" 1024x600 capacitive touchscreen, wireless and wired Apple CarPlay and Android Auto, built-in Bluetooth V4.2 with A2DP, AVRCP, HFP 1.6, and PBAP profiles, AM/FM tuner with RDS, dual rear USB inputs, 50W x 4 maximum power output, 8-band graphic EQ with time alignment, and 4V 5-channel RCA pre-outs including a subwoofer output. The included Infodaptor Interface harness enables vehicle information including climate control and parking visualisation to be displayed and accessed on the aftermarket head unit, retains steering wheel controls, the factory amplified system, parking tones, and vehicle menu access. The Interface connects to the rear camera input on the AM10X; output for this kit will be low resolution. Factory reverse camera retention requires the Aerpro APVVW03 camera retention adaptor (sold separately, not included). An ignition stabiliser (Aerpro APIGNSTB, sold separately, not included) may be required for stop-start models. The factory Bluetooth module fuse may need to be removed for the phone button to function correctly after installation. Tiguan (2015-2016): the kit partially covers the hazard button due to the size of the 10" head unit. Use the Aerpro What Fits Your Car Guide to confirm the correct parts for your specific vehicle before purchase. Features & Benefits Complete Head Unit Upgrade Kit for VW Amarok, Beetle, Caddy, Multivan, Tiguan, and Transporter with Factory MIB-PQ: The AMAVW5 includes all components required to complete a 10" head unit installation in the supported Volkswagen models with factory MIB-PQ unit in a single purchase. 10" Capacitive Touchscreen Display at 1024x600: The AM10X features a 10" G+G capacitive touchscreen at 1024x600 resolution for accurate touch response and clear display across all connected functions including CarPlay, Android Auto, and the native head unit interface. Wireless and Wired Apple CarPlay and Android Auto: The AM10X supports both wireless and wired Apple CarPlay and Android Auto, providing full smartphone integration without requiring a cable connection for compatible devices. Infodaptor Interface - Vehicle Feature Retention: The included Infodaptor Interface harness retains steering wheel controls, factory amplified system, parking tones, and vehicle menu access. Climate control and parking visualisation are displayed on the aftermarket head unit where equipped. The Interface connects via the rear camera input and output will be low resolution. Factory Reverse Camera Retention - APVVW03 Required: Factory reverse camera retention is possible but requires the Aerpro APVVW03 camera retention adaptor, which is not included in the AMAVW5 kit and must be purchased separately. Steering Wheel Control Retention: Factory steering wheel audio controls are retained via the Infodaptor Interface harness and included SWC patch lead. The factory Bluetooth module fuse may need to be removed for the phone button to function correctly after installation. Factory Amplified System Retention: The Infodaptor Interface retains the factory amplified system in the vehicle, preserving the factory speaker and amplifier configuration after the head unit upgrade. Ignition Stabiliser Note for Stop-Start Models: An ignition stabiliser (Aerpro APIGNSTB, sold separately) may be required for Volkswagen models fitted with stop-start systems. Confirm whether your specific vehicle requires this accessory before installation. 50W x 4 Maximum Power with 8-Band Graphic EQ and Time Alignment: The AM10X delivers 25W x 4 RMS at 10% THD and 50W x 4 maximum output at 4 ohms, with an 8-band graphic EQ at 50Hz, 200Hz, 400Hz, 800Hz, 1kHz, 3kHz, 7kHz, and 15kHz, eight preset EQ profiles, loudness, and time alignment. 4V 5-Channel RCA Pre-Outs with Subwoofer Output: The AM10X provides 4V 5-channel RCA pre-outs including front, rear, and subwoofer outputs with adjustable subwoofer level control for external amplifier integration. Bluetooth V4.2 with External Microphone: Built-in Bluetooth V4.2 with A2DP, AVRCP, HFP 1.6, and PBAP profiles supports wireless audio streaming, hands-free calling, and phone book access. An external microphone is included alongside the built-in microphone. Dual Rear USB Inputs with Media Playback: Two rear USB inputs support MP3, AAC, FLAC, Xvid, and MPEG 1/2/4 media playback. USB 1 supports CarPlay, Android Auto, and media playback; USB 2 supports media playback. Both provide 5V/1.5A charging output. Maximum USB capacity is FAT32 32GB. Dual AHD 720P Camera Inputs: The AM10X provides two camera inputs compatible with 720P AHD cameras and a reverse camera input with 12V power supply output for the camera. AM/FM Tuner with RDS: An AM/FM tuner with RDS provides 18 FM presets (6x3) and 12 AM presets (6x2) across standard Australian frequency ranges. Matte Black Fascia Kit and Antenna Adaptor Included: The included matte black fascia kit provides a factory-fit appearance around the AM10X in the supported Volkswagen dashboard, and the antenna adaptor ensures correct connection between the factory antenna and the AM10X. Technical Specs Specification Detail SKU AMAVW5 Brand Aerpro Compatible Vehicles VW Amarok 2016-On, VW Beetle 2015-2016, VW Caddy 2015-2020, VW Multivan 2016-2019, VW Tiguan 2015-2016, VW Transporter 2016-2019 Factory Unit Requirement MIB-PQ Unit Only Head Unit Model AM10X Display Size 10" Display Resolution 1024 x 600 Touchscreen Capacitive G+G OS / CPU Linux 3.4.5 / SPHE8368U RAM / Flash Memory 128MB / 256MB DIN Size 2 DIN Short Body Rated Power 25W x 4 (4 Ohm, 1kHz, 10% THD) Max Power 50W x 4 (4 Ohm) RCA Pre-Outs 4V, 5-Channel (Front, Rear, Subwoofer) EQ 8-Band Graphic (50/200/400/800/1K/3K/7K/15KHz) EQ Presets 8 (Default, Custom, Classic, Rock, Jazz, Electric, Pop, Soft) Time Alignment Yes Apple CarPlay Yes (Wireless and Wired) Android Auto Yes (Wireless and Wired) Bluetooth Version V4.2 + EDR Bluetooth Profiles A2DP, AVRCP, HFP 1.6, PBAP Microphone Built-In and External (included) USB 1 (Rear) CarPlay, Android Auto, Media Playback (5V/1.5A) USB 2 (Rear) Media Playback (5V/1.5A) USB Max Capacity FAT32 32GB Media Formats MP3, AAC, FLAC, Xvid, MPEG 1/2/4 Reverse Camera Input Yes (720P AHD compatible, 12V power output) Second Camera Input Yes (720P AHD compatible) Rear A/V Input Yes (RCA, 3-piece) Composite Video Output Yes AM/FM Tuner Yes, with RDS FM Presets 18 (6x3) AM Presets 12 (6x2) FM Range 87.5-108.0MHz (0.05MHz steps) AM Range 529-1629kHz (9kHz steps) Infodaptor Interface Yes (vehicle info, SWC, amp retention, parking tones, vehicle menu) SWC Retention Yes Factory Amp Retention Yes Parking Tones Yes Vehicle Menu Yes Factory Camera Retention Yes (Aerpro APVVW03 required, sold separately) Camera Output Resolution Low resolution (Infodaptor Interface via rear camera input) Ignition Stabiliser Note May be required for stop-start models (Aerpro APIGNSTB, sold separately) Phone Button Note Factory Bluetooth module fuse may need to be removed Fascia Colour Matte Black Antenna Adaptor Included What's in the Box AM10X Multimedia Receiver Matte Black Fascia Kit Infodaptor Interface Harness SWC Patch Lead Antenna Adaptor External Microphone Power Harness (ISO/3.5mm jack) AV-In Cable (RCA with Audio L/R and Video In) 4.1CH Audio Out Cable Compatible With The AMAVW5 is designed for Volkswagen Amarok (2016-on), Beetle (2015-2016), Caddy (2015-2020), Multivan (2016-2019), Tiguan (2015-2016), and Transporter (2016-2019) vehicles fitted with the factory MIB-PQ unit only. Tiguan (2015-2016) models: the kit partially covers the hazard button. Factory reverse camera retention requires the Aerpro APVVW03 camera retention adaptor (sold separately). An ignition stabiliser (Aerpro APIGNSTB, sold separately) may be required for stop-start models. The factory Bluetooth module fuse may need to be removed for the phone button to function. The Infodaptor Interface output connects via the rear camera input and will be low resolution. Use the Aerpro What Fits Your Car Guide to confirm the correct parts for your specific vehicle before purchase. Frequently Asked Questions Does the AMAVW5 suit all factory Volkswagen head unit types? No. The AMAVW5 suits only Volkswagen vehicles fitted with the factory MIB-PQ unit. Vehicles with a different factory unit require a different kit. Use the Aerpro What Fits Your Car Guide to confirm the correct kit for your specific vehicle before purchase. Does the AMAVW5 retain the factory reverse camera? Factory reverse camera retention is possible but requires the Aerpro APVVW03 camera retention adaptor, which is not included in the AMAVW5 kit and must be purchased separately. What is the Infodaptor Interface and what does it retain? The Infodaptor Interface is a vehicle-specific harness that enables vehicle information including climate control and parking visualisation to be displayed and accessed on the AM10X. It retains steering wheel controls, the factory amplified system, parking tones, and vehicle menu access. The Interface connects to the rear camera input on the AM10X and output will be low resolution. Is an ignition stabiliser required for my vehicle? An ignition stabiliser (Aerpro APIGNSTB, sold separately) may be required for Volkswagen models fitted with stop-start systems. Confirm whether your specific vehicle requires this accessory with your installer before purchase. Does the AMAVW5 support wireless CarPlay and Android Auto? Yes. The AM10X supports both wireless and wired Apple CarPlay and Android Auto, providing full smartphone integration without requiring a cable connection for compatible devices.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX9240K 6.8" Multimedia Receiver Kit Ford Falcon AU Series II and III 2000-2002 A complete 6.8" head unit upgrade kit for the Ford Falcon AU Series II and III (2000-2002), the AX9240K includes a 6.8" wireless CarPlay and Android Auto multimedia receiver, vehicle-specific installation kit with black fascia, SWC interface, OEM radio removal keys and universal patch lead, and a 720P AHD 150-degree surface mount camera with 6-metre cable, retaining steering wheel controls. Product Overview The Aerpro AX9240K is a 6.8" multimedia receiver upgrade kit designed specifically for the Ford Falcon AU Series II and III from 2000-2002. The kit is built around an Aerpro 6.8" Double DIN multimedia receiver featuring a 1024x600 capacitive touchscreen, wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP, AVRCP, and PBAP, AM/FM tuner with RDS, dual rear USB inputs, 50W x 4 maximum power output, 13-band graphic EQ with time alignment, and 4V 6-channel RCA pre-outs covering front, rear, and subwoofer outputs. The vehicle-specific installation kit includes a black fascia kit, steering wheel control interface, OEM radio removal keys, and a universal SWC patch lead. The included 720P AHD surface mount camera features a Sony 225 1/3 CMOS image sensor, 150-degree lens angle, IP67 rating, optional parking guidelines, and 6 metres of video cable with an inline reverse trigger. The camera can be mounted as a front, rear, or reverse camera. The head unit provides two 720P AHD-compatible camera inputs, supporting the included camera alongside an additional front or towing camera. Use the Aerpro What Fits Your Car Guide to confirm the correct parts for your specific vehicle before purchase. Features & Benefits Complete Head Unit Upgrade Kit for Ford Falcon AU II and III 2000-2002: The AX9240K includes all components required to complete a 6.8" Double DIN head unit installation in the Ford Falcon AU Series II and III (2000-2002) in a single purchase, including fascia kit, SWC interface, OEM removal keys, patch lead, and AHD camera. 6.8" Capacitive Touchscreen Display at 1024x600: A 6.8" capacitive touchscreen at 1024x600 resolution provides smooth and responsive touch control for navigation of maps, media, and menus across CarPlay, Android Auto, and the native head unit interface. Wireless and Wired Apple CarPlay and Android Auto: Both wireless and wired Apple CarPlay and Android Auto are supported, providing full smartphone integration without requiring a cable connection for compatible devices. Steering Wheel Control Retention: The included vehicle-specific SWC interface and universal patch lead retain the factory steering wheel audio controls with the aftermarket head unit where applicable. 720P AHD Surface Mount Camera with 150-Degree Angle: The included 720P AHD camera uses a Sony 225 1/3 CMOS image sensor and provides a 150-degree field of view with optional parking guidelines and IP67 weather resistance. It is mountable as a front, rear, or reverse camera and connects via a 6-metre video cable with inline reverse trigger. Dual AHD 720P Camera Inputs: The head unit provides two 720P AHD-compatible camera inputs, supporting the included camera alongside an additional front, rear, or towing camera for comprehensive vehicle visibility. Black Fascia Kit for Ford Falcon AU II and III: The included black fascia kit is designed specifically for the Ford Falcon AU Series II and III (2000-2002) dashboard profile, providing a factory-fit appearance around the 6.8" Double DIN head unit. OEM Radio Removal Keys Included: OEM radio removal keys are included for removal of the factory Ford Falcon AU radio without damage to the head unit or surrounding trim. Bluetooth V5 with HD Voice and External Microphone: Built-in Bluetooth V5 with HFP 1.6 HD Voice, A2DP, AVRCP, and PBAP supports wireless audio streaming, hands-free calling, and phone book access. An external microphone is included alongside the built-in microphone. 50W x 4 Maximum Power with 13-Band Graphic EQ and Time Alignment: The head unit delivers 50W x 4 maximum output at 4 ohms with a 13-band graphic EQ at 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz, eight preset EQ profiles plus two custom profiles, loudness, subwoofer low-pass filter, and time alignment. 4V 6-Channel RCA Pre-Outs with Subwoofer Output: Front, rear, and subwoofer 4V RCA pre-outs with adjustable subwoofer level control support external amplifier integration. Dual Rear USB Inputs with Media Playback: Two rear USB inputs support MP3, MP4, MKV, FLAC, and Xvid media playback. USB 1 supports CarPlay, Android Auto, and media; USB 2 supports media playback. Both provide 5V/1.5A charging. Maximum USB capacity is FAT32 32GB. 6-Colour Button Illumination: Button backlighting is selectable across six colours including red, yellow, green, blue, purple, and white for customisation to match the vehicle interior. AM/FM Tuner with RDS: An AM/FM tuner with RDS provides 18 FM presets and 12 AM presets across standard Australian frequency ranges. Technical Specs Specification Detail SKU AX9240K Brand Aerpro Compatible Vehicles Ford Falcon AU Series II 2000-2002, Ford Falcon AU Series III 2000-2002 Head Unit Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power 50W x 4 (4 Ohm) RCA Pre-Outs 4V, 6-Channel (Front, Rear, Subwoofer) EQ 13-Band Graphic (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 Presets + 2 Custom Time Alignment Yes Apple CarPlay Yes (Wireless and Wired) Android Auto Yes (Wireless and Wired) Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP 1.6 (HD Voice), PBAP Microphone Built-In and External (included) USB 1 (Rear) CarPlay, Android Auto, Media Playback (5V/1.5A) USB 2 (Rear) Media Playback (5V/1.5A) USB Max Capacity FAT32 32GB Media Formats MP3, MP4, MKV, FLAC, Xvid Reverse Camera Input Yes (720P AHD compatible) Second Camera Input Yes (720P AHD compatible) Rear A/V Input Yes (RCA, 3-piece) Composite Video Output Yes AM/FM Tuner Yes, with RDS FM Presets 18 AM Presets 12 FM Range 87.5-108.0MHz (0.05MHz steps) AM Range 522-1710kHz (9kHz steps) Button Illumination 6-Colour (Red, Yellow, Green, Blue, Purple, White) SWC Retention Yes Fascia Colour Black OEM Radio Removal Keys Included Camera Model 720P AHD Surface Mount Camera Image Sensor Sony 225, 1/3 CMOS AHD Camera Angle 150 Degrees Camera IP Rating IP67 Camera Parking Guidelines Optional Camera Mount Type Surface Mount (Front, Rear, or Reverse) Camera Cable Length 6 Metres (with inline reverse trigger) What's in the Box Head Unit: 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface OEM Radio Removal Keys Universal Patch Lead AHD Camera: 720P AHD Surface Mount Camera 6m Video Cable (RCA) with Inline Reverse Trigger Compatible With The AX9240K is designed specifically for the Ford Falcon AU Series II and III from 2000-2002. The head unit provides two 720P AHD-compatible camera inputs, supporting the included surface mount camera alongside an additional front or towing camera. Use the Aerpro What Fits Your Car Guide to confirm the correct parts for your specific vehicle before purchase. Frequently Asked Questions Does the AX9240K include OEM radio removal keys for the Ford Falcon AU? Yes. The vehicle-specific installation kit included in the AX9240K contains OEM radio removal keys specifically for removing the factory Ford Falcon AU radio without damaging the head unit or surrounding dashboard trim. Does the AX9240K retain the Ford Falcon AU steering wheel controls? Yes. The included vehicle-specific SWC interface and universal patch lead retain the factory steering wheel audio controls with the aftermarket head unit where applicable. Can the included AHD camera be used as a front camera instead of a reverse camera? Yes. The included 720P AHD surface mount camera is mountable as a front, rear, or reverse camera. The 6-metre cable with inline reverse trigger supports reverse camera installation; front camera installation uses the same cable without the reverse trigger active. Does the AX9240K support wireless CarPlay and Android Auto? Yes. The AM10X supports both wireless and wired Apple CarPlay and Android Auto, providing full smartphone integration without requiring a cable connection for compatible devices. Can a second camera be connected to the AX9240K? Yes. The head unit provides two 720P AHD-compatible camera inputs, supporting the included camera alongside a second front, rear, or towing camera connected to the second camera input.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less