Aerpro APC179 Brake Light Reverse Camera VW Transporter T5 A clean, OEM-style reverse camera solution for the Volkswagen Transporter T5, the APC179 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC179 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Volkswagen Transporter T5 models from 2004-2015. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a rubber O-ring for a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC179 performs reliably in all weather and climate conditions. Please note that the APC179 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Transporter T5 Specific Fitment: Engineered exclusively for the Volkswagen Transporter T5 (2004-2015), the APC179 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC179 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Rubber O-Ring: A rubber O-ring is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC179 Brand Aerpro Compatible Vehicle Volkswagen Transporter T5, 2004-2015 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC179 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Rubber O-ring Goes Well With The APC179 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Transporter T5. Note that the APC179 is not compatible with the factory Volkswagen Transporter head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Transporter T5 models from 2010-2015 in twin rear door configuration, the APC176 also covers this vehicle range alongside the APC179. Confirm the correct model for your specific Transporter configuration with the supplier. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions How does the APC179 differ from the APC176 for the Volkswagen Transporter? The APC176 covers Volkswagen Transporter T5 (2010-2015), T6 (2016-2019), and T6.1 (2020-on) models in twin rear door configuration. The APC179 is specifically engineered for the Volkswagen Transporter T5 (2004-2015) and covers the earlier T5 production years from 2004 that the APC176 does not. Confirm your vehicle's model year and door configuration with the supplier to determine the correct camera for your specific Transporter. Is the APC179 compatible with the factory Volkswagen Transporter T5 head unit? No. The APC179 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Volkswagen Transporter T5. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the rubber O-ring for? The rubber O-ring is included to create a weatherproof seal between the APC179 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC173 Brake Light Reverse Camera Fiat Ducato Peugeot Boxer A clean, OEM-style reverse camera solution for the Fiat Ducato and Peugeot Boxer, the APC173 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC173 is Aerpro's vehicle-specific brake light reverse camera, engineered for Fiat Ducato (2015-2021) and Peugeot Boxer (2020-on) models. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC173 performs reliably in all weather and climate conditions. Please note that the APC173 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Fiat Ducato and Peugeot Boxer Specific Fitment: Engineered for the Fiat Ducato (2015-2021) and Peugeot Boxer (2020-on), the APC173 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC173 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC173 Brand Aerpro Compatible Vehicle Fiat Ducato (2015-2021), Peugeot Boxer (2020-on) Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC173 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC173 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Fiat Ducato and Peugeot Boxer. Note that the APC173 is not compatible with the factory head units in either vehicle and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC173 compatible with both Fiat Ducato and Peugeot Boxer models? Yes. The APC173 is compatible with Fiat Ducato models from 2015-2021 and Peugeot Boxer models from 2020-on. Both vehicles share a compatible brake light housing profile within these model year ranges. Confirm your vehicle's specific model year before purchase to ensure correct fitment. Is the APC173 compatible with the factory head units in the Fiat Ducato or Peugeot Boxer? No. The APC173 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in either the Fiat Ducato or Peugeot Boxer. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC173 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC172 Brake Light Reverse Camera Ford Transit VO A clean, OEM-style reverse camera solution for the Ford Transit VO, the APC172 replaces the factory brake light housing to deliver a 100-110° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC172 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Ford Transit VO models from 2014-2017. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 100-110° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC172 performs reliably in all weather and climate conditions. Please note that the APC172 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Ford Transit VO Specific Fitment: Engineered exclusively for the Ford Transit VO (2014-2017), the APC172 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 100-110° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC172 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC172 Brand Aerpro Compatible Vehicle Ford Transit VO, 2014-2017 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 100-110° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC172 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC172 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Ford Transit VO. Note that the APC172 is not compatible with the factory Ford Transit VO head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Ford Transit Custom models from 2013-2017, the APC163 is the correct alternative. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC172 and the APC163? Both cameras are brake light replacement reverse cameras for Ford Transit commercial vehicles sharing the same specification and installation approach. The APC172 is engineered for the Ford Transit VO (2014-2017), while the APC163 is engineered for the Ford Transit Custom (2013-2017). The Transit VO and Transit Custom use different brake light housing profiles, so confirm the correct Transit variant for your vehicle before purchase. Is the APC172 compatible with the factory Ford Transit VO head unit? No. The APC172 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Ford Transit VO. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC172 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC171 Brake Light Reverse Camera Fiat Scudo Toyota ProAce A clean, OEM-style reverse camera solution for the Fiat Scudo and Toyota ProAce, the APC171 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC171 is Aerpro's vehicle-specific brake light reverse camera, engineered for Fiat Scudo (2007-2011) and Toyota ProAce (2013-2016) models. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a rubber O-ring to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC171 performs reliably in all weather and climate conditions. Please note that the APC171 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Fiat Scudo and Toyota ProAce Specific Fitment: Engineered for the Fiat Scudo (2007-2011) and Toyota ProAce (2013-2016), the APC171 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC171 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Rubber O-Ring: A rubber O-ring is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC171 Brand Aerpro Compatible Vehicle Fiat Scudo (2007-2011), Toyota ProAce (2013-2016) Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC171 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Rubber O-ring Goes Well With The APC171 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Fiat Scudo and Toyota ProAce. Note that the APC171 is not compatible with the factory head units in either vehicle and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC171 compatible with both the Fiat Scudo and Toyota ProAce? Yes. The APC171 is compatible with Fiat Scudo models from 2007-2011 and Toyota ProAce models from 2013-2016. Both vehicles share a compatible brake light housing profile within these model year ranges. Confirm your vehicle's specific model and build year before purchase to ensure correct fitment. Is the APC171 compatible with the factory head units in the Fiat Scudo or Toyota ProAce? No. The APC171 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in either the Fiat Scudo or Toyota ProAce. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the rubber O-ring for? The rubber O-ring is included to create a weatherproof seal between the APC171 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC170 Brake Light Reverse Camera Renault Trafic X83 A clean, OEM-style reverse camera solution for the Renault Trafic X83, the APC170 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC170 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Renault Trafic X83 models from 2011-2014. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC170 performs reliably in all weather and climate conditions. Please note that the APC170 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Renault Trafic X83 Specific Fitment: Engineered exclusively for the Renault Trafic X83 (2011-2014), the APC170 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC170 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC170 Brand Aerpro Compatible Vehicle Renault Trafic X83, 2011-2014 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC170 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC170 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Renault Trafic X83. Note that the APC170 is not compatible with the factory Renault Trafic head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC170 compatible with Renault Trafic models outside the X83 2011-2014 range? No. The APC170 is specifically engineered for the Renault Trafic X83 from 2011-2014. Trafic models outside this year range or in different generations use a different brake light housing profile and are not compatible with this camera. Confirm your vehicle's model generation and build year before purchase. Is the APC170 compatible with the factory Renault Trafic head unit? No. The APC170 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Renault Trafic X83. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC170 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC169 Brake Light Reverse Camera Renault Master X62 A clean, OEM-style reverse camera solution for the Renault Master X62, the APC169 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC169 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Renault Master X62 models from 2011-2017. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC169 performs reliably in all weather and climate conditions. Please note that the APC169 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Renault Master X62 Specific Fitment: Engineered exclusively for the Renault Master X62 (2011-2017), the APC169 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC169 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC169 Brand Aerpro Compatible Vehicle Renault Master X62, 2011-2017 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC169 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC169 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Renault Master X62. Note that the APC169 is not compatible with the factory Renault Master head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Renault Trafic X83 models from 2011-2014, the APC170 is the correct alternative within the same Renault commercial vehicle camera range. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC169 compatible with Renault Master models outside the X62 2011-2017 range? No. The APC169 is specifically engineered for the Renault Master X62 from 2011-2017. Master models outside this year range or in different generations use a different brake light housing profile and are not compatible with this camera. Confirm your vehicle's model generation and build year before purchase. Is the APC169 compatible with the factory Renault Master head unit? No. The APC169 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Renault Master X62. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC169 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC167 Brake Light Reverse Camera Renault Trafic X82 A clean, OEM-style reverse camera solution for the Renault Trafic X82, the APC167 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC167 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Renault Trafic X82 models from 2014-on. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter, a foam gasket, and a rubber O-ring to ensure a fully weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC167 performs reliably in all weather and climate conditions. Please note that the APC167 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Renault Trafic X82 Specific Fitment: Engineered exclusively for the Renault Trafic X82 (2014-on), the APC167 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC167 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket and Rubber O-Ring: Both a foam gasket and rubber O-ring are included to create a fully weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC167 Brand Aerpro Compatible Vehicle Renault Trafic X82, 2014-on Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC167 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Rubber O-ring Goes Well With The APC167 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Renault Trafic X82. Note that the APC167 is not compatible with the factory Renault Trafic head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For the earlier Renault Trafic X83 (2011-2014), the APC170 is the correct alternative within the same Renault Trafic camera range. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC167 and the APC170? Both cameras are brake light replacement reverse cameras for the Renault Trafic sharing the same specification, output options, and installation approach. The APC167 is engineered for the Renault Trafic X82 from 2014-on, while the APC170 is engineered for the earlier Renault Trafic X83 from 2011-2014. The brake light housing profile differs between the X82 and X83 generations, so confirm your vehicle's model generation and build year before purchase. Is the APC167 compatible with the factory Renault Trafic head unit? No. The APC167 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Renault Trafic X82. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What are the foam gasket and rubber O-ring for? Both the foam gasket and rubber O-ring are included to create a fully weatherproof seal between the APC167 camera housing and the factory brake light mounting location. They work together to prevent water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC166 Brake Light Reverse Camera Peugeot Expert A clean, OEM-style reverse camera solution for the Peugeot Expert, the APC166 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC166 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Peugeot Expert models from 2007-2016. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC166 performs reliably in all weather and climate conditions. Please note that the APC166 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Peugeot Expert Specific Fitment: Engineered exclusively for the Peugeot Expert (2007-2016), the APC166 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC166 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC166 Brand Aerpro Compatible Vehicle Peugeot Expert, 2007-2016 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC166 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC166 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Peugeot Expert. Note that the APC166 is not compatible with the factory Peugeot Expert head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For the Fiat Scudo and Toyota ProAce models that share a platform with the Peugeot Expert, the APC171 covers those variants for the 2007-2016 period. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC166 compatible with Peugeot Expert models outside the 2007-2016 range? No. The APC166 is specifically engineered for the Peugeot Expert from 2007-2016. Expert models outside this year range use a different brake light housing profile and are not compatible with this camera. Confirm your vehicle's model year before purchase. Is the APC166 compatible with the factory Peugeot Expert head unit? No. The APC166 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Peugeot Expert. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC166 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC165 Brake Light Reverse Camera Peugeot Expert 2016-On A clean, OEM-style reverse camera solution for the current-generation Peugeot Expert, the APC165 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC165 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Peugeot Expert models from 2016-on. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC165 performs reliably in all weather and climate conditions. Please note that the APC165 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Peugeot Expert Specific Fitment: Engineered exclusively for the Peugeot Expert (2016-on), the APC165 is a direct OEM replacement for the factory brake light housing on the current-generation model, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC165 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC165 Brand Aerpro Compatible Vehicle Peugeot Expert, 2016-on Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC165 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC165 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Peugeot Expert. Note that the APC165 is not compatible with the factory Peugeot Expert head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For the earlier Peugeot Expert (2007-2016), the APC166 is the correct alternative within the same camera range. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC165 and the APC166? Both cameras are brake light replacement reverse cameras for the Peugeot Expert sharing the same specification, output options, and installation approach. The APC165 is engineered for the current-generation Peugeot Expert from 2016-on, while the APC166 is engineered for the earlier generation from 2007-2016. The brake light housing profile differs between the two generations, so confirm your vehicle's model year before purchase. Is the APC165 compatible with the factory Peugeot Expert head unit? No. The APC165 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Peugeot Expert. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. Is a trigger wire included, and is one needed? A trigger wire is not included with the APC165. Reverse camera activation is typically managed through the head unit's reverse trigger input, which is connected to the vehicle's reverse light circuit via the installation harness. Confirm the reverse trigger wiring arrangement with the head unit's installation instructions for the specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWTO31C SWC Interface Toyota Various Models with OEM Amplifier Retain your factory steering wheel controls, OEM amplifier, USB, AUX, and reverse camera when upgrading to an aftermarket head unit in select Toyota vehicles from 2020-on with amplified OEM audio systems. Product Overview The SWTO31C is Aerpro's CANbus steering wheel control interface, engineered for various Toyota vehicles from 2020-on equipped with OEM amplified systems and factory reverse cameras. It allows the factory steering wheel audio control buttons to operate correctly with a compatible aftermarket head unit while simultaneously retaining the OEM amplifier, OEM AUX input, OEM USB input, and factory reverse camera functionality (excluding 360-degree cameras). The interface uses CANbus integration and requires no additional modules, connecting directly to the existing factory wiring via a vehicle-specific plug without cutting or modifying the original harness. Installation is further simplified when paired with the optional Aerpro APP8 Headunit Secondary ISO Harness, which connects between the aftermarket head unit and the SWTO31C interface. The SWTO31C provides output feeds for reverse trigger (Purple/White wire), park brake (Green wire), and speed pulse (Pink wire), supporting a wide range of aftermarket head unit installation requirements. OEM phone button functionality is supported when connected to compatible aftermarket Bluetooth head units. Note that for amplified vehicles, fade control is not supported through this interface. The aftermarket head unit must be SWC compatible, and steering wheel control functions may vary from the original OEM button assignments. Features & Benefits Retains Factory Steering Wheel Controls: The SWTO31C allows the factory steering wheel audio control buttons to operate with a compatible aftermarket head unit, preserving the OEM functionality that would otherwise be lost during a head unit upgrade and improving driver safety by keeping hands on the wheel. Retains OEM Amplifier: The OEM amplifier is retained in the signal chain, preserving factory speaker output through the existing speaker wiring. Note that fade control is not supported through this interface on amplified vehicles. Retains OEM Reverse Camera: The factory reverse camera is retained and enabled to display on a compatible aftermarket AV head unit with an RCA camera input. 360-degree camera systems are not supported. Retains OEM USB and AUX Inputs: Factory USB and AUX inputs (where equipped) are retained when connected to compatible aftermarket head units with matching rear USB and AUX inputs. OEM Phone Button Support: The OEM phone button on the steering wheel is supported when the SWTO31C is connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel. CANbus Integration, No Additional Modules Required: The SWTO31C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules, simplifying installation and reducing component count. Reverse Trigger, Park Brake, and Speed Pulse Outputs: Dedicated output wires for reverse trigger (Purple/White), park brake (Green), and speed pulse (Pink) support the full range of aftermarket head unit installation requirements in one interface. Vehicle-Specific Plug, No Wire Cutting Required: The interface is fitted with a vehicle-specific connector that plugs directly into the existing factory wiring without cutting or splicing the original harness, simplifying both installation and future removal. Recommended for Use with Aerpro APP8 Harness: Installation is simplified when paired with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWTO31C for a clean, integrated wiring solution. Technical Specs Specification Detail SKU SWTO31C Brand Aerpro Interface Type CANbus Patch Lead Type SW Compatible Vehicles Toyota Various Models, 2020-on (with OEM amplified system) Phone Button Compatibility Yes Voice Assistant Button Support No Reverse Trigger Output Yes (Purple/White wire) Park Brake Output Yes (Green wire) Speed Pulse Output Yes (Pink wire) OEM Amplified System Retention Yes (fade not supported) OEM USB Retention Yes (if equipped) OEM AUX Retention Yes (if equipped) OEM Reverse Camera Retention Yes (excludes 360-degree cameras) Compatible With The SWTO31C is designed for various Toyota vehicles from 2020-on with OEM amplified systems and factory reverse cameras. Steering wheel control interfaces vary between models. Use the Aerpro Vehicle Selector at aerpro.com to confirm the correct part number for your specific Toyota model, build date, and OEM audio system before purchase. Frequently Asked Questions What OEM features does the SWTO31C retain when upgrading to an aftermarket head unit? The SWTO31C retains factory steering wheel audio controls, the OEM amplifier, OEM USB input (if equipped), OEM AUX input (if equipped), and the factory reverse camera (excluding 360-degree camera systems). All retained features require connection to a compatible aftermarket head unit with the appropriate inputs and SWC compatibility. Fade control is not supported on amplified vehicles. Does the SWTO31C support the factory phone button on the steering wheel? Yes. The SWTO31C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel without additional hardware. Will the factory reverse camera work with an aftermarket head unit using the SWTO31C? Yes, provided the aftermarket head unit has an RCA reverse camera input. The SWTO31C retains and passes through the factory reverse camera signal to a compatible aftermarket AV head unit. 360-degree camera systems are not supported by this interface. Is the SWTO31C compatible with all Toyota vehicles from 2020-on? The SWTO31C is designed for various Toyota vehicles from 2020-on with OEM amplified systems. Not all Toyota models use the same wiring configuration, so compatibility varies between specific models and build dates. Use the Aerpro Vehicle Selector at aerpro.com to confirm the correct interface for your specific vehicle before purchase. Does the SWTO31C require additional CANbus modules to function? No. The SWTO31C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules. All necessary CANbus decoding is handled within the interface itself, simplifying installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWTO30C SWC Interface Toyota Various Models with OEM Amplifier Retain your factory steering wheel controls, OEM amplifier, USB, AUX, and reverse camera when upgrading to an aftermarket head unit in select Toyota vehicles from 2015-2020 with amplified OEM audio systems. Product Overview The SWTO30C is Aerpro's CANbus steering wheel control interface, engineered for various Toyota vehicles from 2015-2020 equipped with OEM amplified systems and factory reverse cameras. It allows the factory steering wheel audio control buttons to operate correctly with a compatible aftermarket head unit while simultaneously retaining the OEM amplifier, OEM AUX input, OEM USB input, and factory reverse camera functionality (excluding 360-degree cameras). The interface uses CANbus integration and requires no additional modules, connecting directly to the existing factory wiring via a vehicle-specific plug without cutting or modifying the original harness. Installation is further simplified when paired with the optional Aerpro APP8 Headunit Secondary ISO Harness, which connects between the aftermarket head unit and the SWTO30C interface. The SWTO30C provides output feeds for reverse trigger (Purple/White wire), park brake (Green wire), and speed pulse (Pink wire), supporting a wide range of aftermarket head unit installation requirements. OEM phone button functionality is supported when connected to compatible aftermarket Bluetooth head units. Note that for amplified vehicles, fade control is not supported through this interface. The aftermarket head unit must be SWC compatible, and steering wheel control functions may vary from the original OEM button assignments. Features & Benefits Retains Factory Steering Wheel Controls: The SWTO30C allows the factory steering wheel audio control buttons to operate with a compatible aftermarket head unit, preserving the OEM functionality that would otherwise be lost during a head unit upgrade and improving driver safety by keeping hands on the wheel. Retains OEM Amplifier: The OEM amplifier is retained in the signal chain, preserving factory speaker output through the existing speaker wiring. Note that fade control is not supported through this interface on amplified vehicles. Retains OEM Reverse Camera: The factory reverse camera is retained and enabled to display on a compatible aftermarket AV head unit with an RCA camera input. 360-degree camera systems are not supported. Retains OEM USB and AUX Inputs: Factory USB and AUX inputs (where equipped) are retained when connected to compatible aftermarket head units with matching rear USB and AUX inputs. OEM Phone Button Support: The OEM phone button on the steering wheel is supported when the SWTO30C is connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel. CANbus Integration, No Additional Modules Required: The SWTO30C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules, simplifying installation and reducing component count. Reverse Trigger, Park Brake, and Speed Pulse Outputs: Dedicated output wires for reverse trigger (Purple/White), park brake (Green), and speed pulse (Pink) support the full range of aftermarket head unit installation requirements in one interface. Vehicle-Specific Plug, No Wire Cutting Required: The interface is fitted with a vehicle-specific connector that plugs directly into the existing factory wiring without cutting or splicing the original harness, simplifying both installation and future removal. Recommended for Use with Aerpro APP8 Harness: Installation is simplified when paired with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWTO30C for a clean, integrated wiring solution. Technical Specs Specification Detail SKU SWTO30C Brand Aerpro Interface Type CANbus Patch Lead Type SW Compatible Vehicles Toyota Various Models, 2015-2020 (with OEM amplified system) Phone Button Compatibility Yes Voice Assistant Button Support No Reverse Trigger Output Yes (Purple/White wire) Park Brake Output Yes (Green wire) Speed Pulse Output Yes (Pink wire) OEM Amplified System Retention Yes (fade not supported) OEM USB Retention Yes (if equipped) OEM AUX Retention Yes (if equipped) OEM Reverse Camera Retention Yes (excludes 360-degree cameras) Compatible With The SWTO30C is designed for various Toyota vehicles from 2015-2020 with OEM amplified systems and factory reverse cameras. Steering wheel control interfaces vary between models. Use the Aerpro Vehicle Selector at aerpro.com to confirm the correct part number for your specific Toyota model, build date, and OEM audio system before purchase. For Toyota vehicles from 2020-on with equivalent OEM amplified systems, the SWTO31C is the correct alternative. Frequently Asked Questions What is the difference between the SWTO30C and the SWTO31C? Both interfaces are CANbus steering wheel control interfaces for Toyota vehicles with OEM amplified systems, sharing the same specification, retained features, and output wires. The SWTO30C is engineered for Toyota vehicles from 2015-2020, while the SWTO31C is engineered for Toyota vehicles from 2020-on. The factory wiring and CANbus configuration differ between these production periods, so confirm your vehicle's build date using the Aerpro Vehicle Selector before purchase. What OEM features does the SWTO30C retain when upgrading to an aftermarket head unit? The SWTO30C retains factory steering wheel audio controls, the OEM amplifier, OEM USB input (if equipped), OEM AUX input (if equipped), and the factory reverse camera (excluding 360-degree camera systems). All retained features require connection to a compatible aftermarket head unit with the appropriate inputs and SWC compatibility. Fade control is not supported on amplified vehicles. Does the SWTO30C support the factory phone button on the steering wheel? Yes. The SWTO30C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call management from the steering wheel without additional hardware. Will the factory reverse camera work with an aftermarket head unit using the SWTO30C? Yes, provided the aftermarket head unit has an RCA reverse camera input. The SWTO30C retains and passes through the factory reverse camera signal to a compatible aftermarket AV head unit. 360-degree camera systems are not supported by this interface. Does the SWTO30C require additional CANbus modules to function? No. The SWTO30C is CANbus compatible and integrates directly with the factory vehicle network without requiring additional interface modules. All necessary CANbus decoding is handled within the interface itself, simplifying installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AMATO22 10" Multimedia Head Unit Upgrade Kit Toyota Prado GXL A complete, vehicle-specific head unit upgrade for the Toyota Prado GXL (2017-2020), the AMATO22 delivers a 10" wireless CarPlay and Android Auto multimedia receiver with full retention of steering wheel controls, factory amplifier, reverse camera, USB, and AUX. Product Overview The AMATO22 is Aerpro's complete head unit upgrade kit engineered specifically for the Toyota Prado GXL from 2017-2020. Rather than a standalone head unit requiring separate accessory sourcing, the AMATO22 is supplied as a matched kit containing all components required for a complete, OEM-quality installation that retains the vehicle's important factory features. The kit centres on the AM10X 10" multimedia receiver, featuring a large 1024x600 capacitive touchscreen, wireless and wired Apple CarPlay and Android Auto, Bluetooth V4.2+EDR with HFP 1.6 HD Voice, AM/FM tuning with RDS, dual rear USB inputs, and dual AHD 720P-compatible camera inputs. Audio performance is handled by 4 x 50 watts maximum power output, an 8-band graphic EQ with time alignment, and 4V 5-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. The kit includes a gloss black and silver fascia kit, steering wheel control interface harness (including phone button support), antenna adaptor, camera retention adaptor, and USB retention adaptor, ensuring the factory steering wheel controls, OEM amplifier, factory reverse camera, USB input, and AUX input are all retained after installation. Note that Toyota Connect features including calendar and trip information displayed on the factory screen are not retained. The AMATO22 is supplied with an external microphone, and the head unit includes both built-in and external microphone support. Weight is 4.00kg. Features & Benefits Complete Vehicle-Specific Upgrade Kit: The AMATO22 includes every component needed for a complete, OEM-quality installation in the Toyota Prado GXL 2017-2020, including the head unit, fascia kit, steering wheel control harness, antenna adaptor, camera retention adaptor, and USB retention adaptor. No additional accessories need to be sourced separately for a standard installation. Large 10" Capacitive Touchscreen: The 10" G+G capacitive touchscreen at 1024x600 resolution provides a large, responsive display for navigation, media, and menus that fills the factory dashboard opening cleanly with the included gloss black and silver fascia kit. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto are supported wirelessly and via wired connection, providing immediate access to navigation, music, calls, and messages from the moment the driver enters the vehicle. Full OEM Feature Retention: The kit retains factory steering wheel controls (including phone button), the factory OEM amplifier, factory reverse camera, factory USB input, and factory AUX input, preserving the driving experience and functionality of the original vehicle setup. Bluetooth V4.2+EDR with HFP 1.6 HD Voice: Bluetooth V4.2 with Enhanced Data Rate supports A2DP audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling, with both built-in and external microphone support. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs support the retained factory reverse camera on the first input and an additional front or towing camera on the second input simultaneously. 4V 5-Channel RCA Preouts: Five RCA preamp output channels at 4V covering front, rear, and subwoofer allow direct connection to external amplifiers with high output voltage for low-noise system integration. 8-Band Graphic EQ with Time Alignment: The 8-band EQ covering 50Hz, 200Hz, 400Hz, 800Hz, 1kHz, 3kHz, 7kHz, and 15kHz, combined with time alignment and 8 preset EQ modes, provides comprehensive acoustic tuning from the head unit. Gloss Black and Silver Fascia Kit Included: The vehicle-specific fascia kit is finished in gloss black and silver to match the Toyota Prado GXL interior trim, providing a factory-quality fit and finish around the 10" head unit. AM/FM Tuner with RDS: AM tuning covers 529-1629kHz with 12 presets, and FM covers 87.5-108.0MHz with 18 presets and RDS support. Technical Specs Specification Detail SKU AMATO22 Brand Aerpro Compatible Vehicle Toyota Prado GXL, 2017-2020 (150 Series) Head Unit Included AM10X Multimedia Receiver Display Size 10" Display Resolution 1024 x 600 Touchscreen Type Capacitive (G+G) OS / CPU Linux 3.4.5 / SPHE8368U RAM / Flash 128MB / 256MB DIN Size 2 DIN Short Body Rated Power (4 Ohm, 14.4V, 1kHz, THD 10%) 25W x 4 Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 5-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 8-Band (50/200/400/800/1K/3K/7K/15KHz) EQ Presets 8 (Default, Custom, Classic, Rock, Jazz, Electric, Pop, Soft) Loudness Yes Low-Pass Filter (Sub) Yes Time Alignment Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V4.2+EDR Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Built-in and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Media Playback (5V/1.5A) USB 2 (Rear) Media Playback (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, AAC, FLAC, Xvid, MPEG 1/2/4 Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 529-1629kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets FM Antenna Connector Motorola, 50 Ohm RDS Yes Button Illumination White OSD Language English Weight 4.00kg Vehicle Feature Retention Feature Retained Steering Wheel Controls Yes (including phone button) Factory Reverse Camera Yes AUX Input Yes USB Input Yes Factory Amplifier Yes Parking Tones N/A Vehicle Menu (Toyota Connect calendar, trip info) No What's in the Box 1x AM10X 10" Multimedia Receiver Gloss Black and Silver Fascia Kit Steering Wheel Control Interface Harness Antenna Adaptor Camera Retention Adaptor USB Retention Adaptor Power Harness (ISO/3.5mm jack) AV-In Cable (RCA with Audio L/R and Video In) Reverse Camera Input Cable (with 12V power supply) 4.1CH Audio Out Cable External Microphone Frequently Asked Questions Does the AMATO22 retain all factory Toyota Prado features? The AMATO22 retains steering wheel controls (including phone button), factory OEM amplifier, factory reverse camera, factory USB input, and factory AUX input. Toyota Connect features that appear on the factory screen, including calendar and trip information, are not retained after installation. All retained features require connection using the included adaptor harnesses. Is a separate fascia kit or steering wheel control interface required? No. The AMATO22 is a complete kit that includes the gloss black and silver fascia kit and the steering wheel control interface harness alongside all other required adaptors. No additional accessories need to be purchased separately for a standard installation in the Toyota Prado GXL 2017-2020. Does wireless CarPlay require any initial setup? On first connection, wireless CarPlay and Android Auto require a one-time pairing between the smartphone and the AM10X head unit via Bluetooth and Wi-Fi. Once paired, the smartphone connects automatically each time it is brought within range of the vehicle. Wired connection via the rear USB input is also available as an alternative or for first-time setup. Will the factory reverse camera display on the AMATO22? Yes. The included camera retention adaptor connects the factory reverse camera to the AM10X head unit's reverse camera input, allowing the factory camera to display on the 10" screen when reverse gear is selected. The camera retention uses the reverse camera input on the head unit. Can external amplifiers be added to the AMATO22 system? Yes. The AM10X provides 4V 5-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be added to the system for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong signal level for low-noise amplifier integration.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less