Aerpro AXDISCL2 Amp Interface Data Integrator Chrysler A data interface for Chrysler vehicles, the AXDISCL2 retains factory steering wheel controls, OnStar, OEM Bluetooth, satellite radio, balance and fade, chimes, factory AUX, and rear seat entertainment when replacing the factory radio, with NAV outputs, accessory power, and micro USB firmware updating. Product Overview The Aerpro AXDISCL2 is a data integration interface designed for Chrysler vehicles. It provides retention of factory features that are typically lost when the factory radio is replaced, including OnStar, SYNC, OEM Bluetooth wireless connectivity, satellite radio, balance and fade, chimes, factory AUX-in jack, and rear seat entertainment. The AXDISCL2 incorporates patented built-in steering wheel control technology with a patented auto-detect feature that automatically detects the vehicle type, radio connection, and preset controls, while allowing dual-assignment of steering wheel controls. The interface supports non-amplified, analogue amplified, and digital amplified vehicle systems, though balance and fade are not retained on digital amplified models. NAV outputs provided include parking brake, reverse, and speed sense. Retained Accessory Power (R.A.P.) is also supported, along with telematics retention for SYNC, OnStar, and UVO. Accessory power output is 12V at 10A. Adjustable volume is available for OnStar. The AXDISCL2 is micro USB updatable for firmware updates. This product is dependent on the vehicle application; use the Vehicle Fit Guide to confirm compatibility with your specific Chrysler vehicle before purchase. Features & Benefits Patented Auto-Detect Steering Wheel Control Technology: The AXDISCL2 incorporates patented built-in SWC technology with an auto-detect feature that automatically identifies the vehicle type, radio connection, and preset controls, and allows dual-assignment of steering wheel controls with a compatible aftermarket head unit. OnStar, OEM Bluetooth, and Satellite Radio Retention: The AXDISCL2 retains OnStar, OEM Bluetooth wireless connectivity, and satellite radio functionality if equipped in the vehicle. Adjustable volume control is available for OnStar after installation. Telematics Retention - SYNC, OnStar, and UVO: The AXDISCL2 supports telematics retention for SYNC, OnStar, and UVO systems, maintaining vehicle telematics connectivity after the factory radio is replaced. Supports Non-Amplified, Analogue Amplified, and Digital Amplified Systems: The AXDISCL2 is designed for non-amplified, analogue amplified, and digital amplified Chrysler vehicles. Balance and fade are retained on non-amplified and analogue amplified models but are not supported on digital amplified models. Balance and Fade Retention: Balance and fade are retained when connected to compatible non-amplified or analogue amplified Chrysler vehicles. Digital amplified models are excluded from balance and fade retention. NAV Outputs - Parking Brake, Reverse, and Speed Sense: The AXDISCL2 provides parking brake, reverse, and speed sense NAV output feeds for compatible aftermarket head units that use these signals for safety, navigation, and speed-dependent functions. Retained Accessory Power (R.A.P.): The AXDISCL2 retains the vehicle's R.A.P. function, ensuring accessory features continue to operate after the ignition is turned off in accordance with the factory R.A.P. behaviour. 12V 10A Accessory Power Output: The AXDISCL2 provides a 12V 10A accessory power output for powering connected accessories. Chimes and Factory AUX-In Retention: Factory vehicle chimes and the factory AUX-in jack are retained after installation, preserving these OEM functions with the aftermarket head unit. Rear Seat Entertainment Retention: The AXDISCL2 retains rear seat entertainment functionality. RSE must have been activated by the factory radio prior to installation. Micro USB Updatable: The AXDISCL2 supports firmware updates via micro USB, allowing the interface to be updated for compatibility with new vehicle applications and software improvements. Technical Specs Specification Detail SKU AXDISCL2 Brand Aerpro Compatible Vehicles Chrysler Various Models Amplified System Support Non-Amplified, Analogue Amplified, Digital Amplified Accessory Power Output 12V, 10A Retained Accessory Power (R.A.P.) Yes SWC Technology Patented Built-In with Auto-Detect Dual-Assign SWC Yes OnStar Retention Yes OEM Bluetooth Retention Yes (if equipped) Satellite Radio Retention Yes (if equipped) OnStar Volume Adjustment Yes SYNC Retention Yes UVO Retention Yes Balance and Fade Retention Yes (excludes digital amplified models) Chimes Retention Yes Factory AUX-In Retention Yes Rear Seat Entertainment Retention Yes (RSE must be activated by factory radio) NAV Outputs Parking Brake, Reverse, Speed Sense Firmware Updates Micro USB updatable Compatible With The AXDISCL2 is designed for Chrysler vehicles. This product is dependent on the vehicle application. Use the Vehicle Fit Guide to confirm compatibility with your specific Chrysler vehicle before purchase. Balance and fade retention is not supported on digital amplified models. Rear seat entertainment retention requires RSE to have been activated by the factory radio prior to installation. Frequently Asked Questions Does the AXDISCL2 retain OnStar and OEM Bluetooth after the factory radio is replaced? Yes. The AXDISCL2 retains OnStar and OEM Bluetooth wireless connectivity when equipped in the vehicle. Adjustable volume control for OnStar is also provided through the interface. Does the AXDISCL2 retain balance and fade on all Chrysler vehicles? Balance and fade are retained on non-amplified and analogue amplified Chrysler vehicles. Digital amplified models are excluded from balance and fade retention. Does the AXDISCL2 support rear seat entertainment retention? Yes. The AXDISCL2 retains rear seat entertainment functionality. RSE must have been activated by the factory radio prior to the aftermarket head unit installation for RSE retention to function. How does the auto-detect steering wheel control feature work? The AXDISCL2 uses patented auto-detect technology to automatically identify the vehicle type, factory radio connection type, and preset steering wheel control configurations. This eliminates the need for manual programming of SWC inputs in most supported applications and also allows dual-assignment of steering wheel control buttons with the aftermarket head unit. How do I update the firmware on the AXDISCL2? The AXDISCL2 is updatable via micro USB connection. Connect a micro USB cable from the interface to a computer and follow the firmware update instructions provided by Aerpro to ensure the interface has the latest vehicle application support and software improvements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro FP8597 Fascia Install Kit Nissan Skyline V35 2001-2004 Silver A vehicle-specific head unit installation kit for the Nissan Skyline V35 (2001-2004), the FP8597 is finished in silver to match the factory dashboard and includes a complete HVAC climate control panel replacement, mounting brackets, and antenna adaptor for a single or double DIN aftermarket head unit installation. Product Overview The Aerpro FP8597 is a fascia installation kit designed specifically for the Nissan Skyline V35 from 2001-2004. It provides a complete replacement of the factory climate control panel area in a silver painted finish that matches the factory dashboard, with a recessed DIN opening accommodating both single and double DIN aftermarket head units. The internal aperture measures 173mm wide by 98mm high. The kit retains full HVAC functionality in both factory single and dual climate control models, and retains the factory air vents in their original location. The FP8597 includes a fascia kit with integrated HVAC panel, mounting brackets, and an antenna adaptor. A comprehensive instruction manual and all necessary installation hardware are included. To further simplify the installation, the Aerpro SWNI3C steering wheel control interface or APP0120 vehicle ISO harness adaptor (both sold separately) can be used to connect the factory Nissan wiring harness and convert it to a universal ISO connector. If the vehicle was factory-fitted with navigation, a replacement non-navigation lid (genuine part) will need to be sourced and used to blank the hole from the existing navigation screen location before the FP8597 can be installed. Features & Benefits Nissan Skyline V35 2001-2004 Specific Design: The FP8597 is engineered specifically for the Nissan Skyline V35 from 2001-2004, providing a precise contoured fit that matches the factory dashboard profile. Silver Painted Finish to Match Factory Dashboard: The FP8597 is painted silver to match the factory interior finish of the Nissan Skyline V35, providing a factory-consistent appearance after installation. Complete HVAC Climate Control Panel Replacement: The FP8597 replaces the entire factory climate control panel rather than just the head unit surround, providing an integrated solution that maintains the OEM appearance of the full dashboard section. Retains Full HVAC Functionality - Single and Dual Climate Control: The FP8597 retains full heating, ventilation, and air conditioning functionality for both factory single and dual climate control configurations of the Skyline V35, with no loss of climate control operation after installation. Retains Factory Air Vents in Original Location: The custom design of the FP8597 allows the factory air vents to remain in their original positions within the dashboard, preserving the OEM interior layout and airflow characteristics. Accommodates Single or Double DIN Head Units: The FP8597 provides a recessed DIN opening with internal dimensions of 173mm wide by 98mm high, and includes a double DIN radio trim, accommodating both single and double DIN aftermarket head unit installations. Oversized Storage Pocket: The FP8597 includes an oversized storage pocket below the DIN opening, providing a useful storage area within the dashboard after installation. Antenna Adaptor Included: The FP8597 includes an antenna adaptor to ensure the factory antenna connection from the Nissan Skyline V35 interfaces correctly with the aftermarket head unit's antenna input. High-Grade ABS Plastic Construction: The fascia is manufactured from high-grade ABS plastic for long-term durability and dimensional stability in the in-vehicle environment. Comprehensive Instruction Manual and All Hardware Included: A comprehensive instruction manual and all necessary mounting hardware are included, supporting a complete DIY installation. Compatible with Aerpro SWNI3C and APP0120: The FP8597 is compatible with the Aerpro SWNI3C steering wheel control interface and the APP0120 vehicle ISO harness adaptor (both sold separately), which connect the factory Nissan wiring harness to a universal ISO connector for the aftermarket head unit. Technical Specs Specification Detail SKU FP8597 Brand Aerpro Compatible Vehicles Nissan Skyline V35, 2001-2004 Application Single or Double DIN Colour Silver Material High-Grade ABS Plastic Internal Dimensions 173mm W x 98mm H HVAC Panel Included (full replacement) Mounting Brackets Included Antenna Adaptor Included Double DIN Radio Trim Included Storage Pocket Oversized (included) Instruction Manual Comprehensive (included) Factory Nav Note Replacement non-navigation lid (genuine part) required if factory nav equipped Recommended Accessories Aerpro SWNI3C SWC Interface or APP0120 ISO Harness Adaptor (sold separately) What's in the Box Silver Fascia Kit (includes HVAC climate control panel) Mounting Brackets Antenna Adaptor Comprehensive Instruction Manual All Necessary Mounting Hardware Compatible With The FP8597 is designed for the Nissan Skyline V35 from 2001-2004 and accommodates both single and double DIN aftermarket head units. The internal aperture of 173mm wide by 98mm high suits standard single and double DIN head unit face dimensions. If the vehicle was factory-fitted with navigation, a replacement non-navigation lid (genuine Nissan part) must be sourced to blank the existing navigation screen aperture before the FP8597 can be installed. Compatible with the Aerpro SWNI3C SWC interface and APP0120 vehicle ISO harness adaptor (both sold separately) for a complete installation. Frequently Asked Questions Does the FP8597 retain the factory Nissan Skyline V35 climate controls? Yes. The FP8597 replaces the entire factory climate control panel and retains full HVAC functionality for both single and dual climate control configurations of the Nissan Skyline V35. All climate control functions remain accessible after installation. Is the FP8597 compatible with Skyline V35 models that had factory navigation? If the vehicle was factory-fitted with navigation, a replacement non-navigation lid (genuine Nissan part) must be sourced and used to blank the navigation screen aperture before the FP8597 can be installed. This genuine part is not included with the FP8597. Does the FP8597 suit both single and double DIN head units? Yes. The FP8597 accommodates both single and double DIN aftermarket head units, with an internal aperture of 173mm wide by 98mm high and a double DIN radio trim included in the kit. What additional parts are needed for a complete installation? The FP8597 provides the fascia, HVAC panel, mounting brackets, and antenna adaptor. To connect the factory Nissan wiring to the aftermarket head unit, the Aerpro APP0120 vehicle ISO harness adaptor is available separately. For steering wheel control retention, the Aerpro SWNI3C SWC interface is available separately. Does the FP8597 retain the factory air vents? Yes. The FP8597 is designed to retain the factory air vents of the Nissan Skyline V35 in their original dashboard positions, maintaining the OEM interior layout and airflow after installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWLR10C Steering Wheel Control Interface Land Rover Freelander 2 MOST 25 Amplified A CANBUS and fibre optic steering wheel control interface engineered for the Land Rover Freelander 2 (2007-2012) with MOST 25 amplified systems, the SWLR10C retains factory steering wheel controls and the MOST 25 OEM amplified system, and provides reverse trigger, park brake, speed pulse, illumination, and amp remote outputs with no wire cutting required. Product Overview The Aerpro SWLR10C is a CANBUS and fibre optic steering wheel control interface designed for the Land Rover Freelander 2 from 2007-2012 fitted with MOST 25 amplified systems. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. No additional modules are required for CANBUS or fibre optic vehicles. The SWLR10C is compatible with SW-type patch leads (sold separately), supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit, and retains the MOST 25 OEM amplified system. To maintain the MOST 25 OEM amplified system, the aftermarket head unit must have RCA pre-outs. The cable from the OEM display must be removed and replaced with the included MOST loop (orange wire) to reroute the signal during installation. After installation, the original navigation display will only show the Land Rover logo and does not support date or time retention. Outputs include reverse trigger (purple/white), park brake (green), speed pulse (pink), illumination (orange), and amp remote (blue). Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWLR10C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWLR10C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. CANBUS and Fibre Optic Integration - No Additional Modules Required: The SWLR10C uses CANBUS and fibre optic integration for direct communication with the vehicle's CANBUS network and MOST 25 fibre optic audio bus, eliminating the need for additional interface modules in the Land Rover Freelander 2. MOST 25 OEM Amplified System Retention: The SWLR10C retains the MOST 25 OEM amplified system in the vehicle. The aftermarket head unit must have RCA pre-outs for MOST 25 amplified system retention to function. The included MOST loop (orange wire) must be connected in place of the OEM display cable to reroute the fibre optic signal. MOST Loop (Orange Wire) Included for Signal Rerouting: The SWLR10C is supplied with a MOST loop (orange wire) that must be installed by removing the cable from the OEM display and replacing it with the loop to correctly reroute the MOST 25 fibre optic signal during installation. Vehicle-Specific Plug - No Wire Cutting Required: The SWLR10C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM Phone Button Support: The SWLR10C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Reverse Trigger Output (Purple/White): A reverse trigger output via a purple/white wire enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Park Brake Output (Green): A park brake output is provided via a green wire, supplying the park brake signal required by compatible aftermarket head units for safety feature operation. Speed Pulse Output (Pink): A speed pulse output is provided via a pink wire for aftermarket head units that require a vehicle speed signal for navigation or speed-dependent volume functions. Illumination Output (Orange): An illumination output is provided via an orange wire, allowing the aftermarket head unit to automatically adjust its display brightness in response to the vehicle's instrument illumination signal. Amp Remote Output (Blue): An amp remote output is provided via a blue wire for triggering the retained OEM amplifier and compatible external amplifiers when the head unit is powered on. Original Navigation Display Limitation: After installation, the original Land Rover navigation display will only show the Land Rover logo. Date and time retention are not supported. Compatible with Aerpro APP8 Secondary ISO Harness: The SWLR10C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWLR10C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWLR10C Brand Aerpro Compatible Vehicles Land Rover Freelander 2, 2007-2012 Interface Type CANBUS and Fibre Optic Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support No OEM Amplified System Retention Yes - MOST 25 (aftermarket head unit requires RCA pre-outs) MOST Loop Yes (orange wire, included) Reverse Trigger Output Yes (Purple/White) Park Brake Output Yes (Green) Speed Pulse Output Yes (Pink) Illumination Output Yes (Orange) Amp Remote Output Yes (Blue) Telephone Mute Output No Original Nav Display Shows Land Rover logo only after installation Date and Time Retention Not supported Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWLR10C is engineered for the Land Rover Freelander 2 from 2007-2012 fitted with MOST 25 amplified systems. To retain the MOST 25 OEM amplified system, the aftermarket head unit must have RCA pre-outs. The cable from the OEM display must be removed and replaced with the included MOST loop (orange wire) to reroute the fibre optic signal. After installation, the original navigation display will only show the Land Rover logo and date and time retention are not supported. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWLR10C require cutting of the factory wiring harness? No. The SWLR10C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWLR10C retain the MOST 25 OEM amplified system? Yes. The SWLR10C retains the MOST 25 OEM amplified system. The aftermarket head unit must have RCA pre-outs for the amplified system retention to function. The included MOST loop (orange wire) must be installed by removing the cable from the OEM display and replacing it with the loop to correctly reroute the fibre optic signal. What happens to the original navigation display after installing the SWLR10C? After installation, the original Land Rover navigation display will only show the Land Rover logo. Date and time retention are not supported. This is a known limitation of the SWLR10C on the Freelander 2 platform. Is a SWC patch lead included with the SWLR10C? No. A steering wheel control patch lead is required to use the SWLR10C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. What is the MOST loop included with the SWLR10C used for? The MOST loop (orange wire) is included to reroute the MOST 25 fibre optic signal after the OEM display cable is removed. During installation, the cable that connects to the OEM display must be disconnected and replaced with the MOST loop to maintain the integrity of the fibre optic signal loop required for MOST 25 amplified system retention.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWKI2C Steering Wheel Control Interface Hyundai and Kia Various Models SPDIF Amplified A CANBUS steering wheel control interface engineered for various Hyundai and Kia vehicles with OEM SPDIF digital amplifiers, the SWKI2C retains factory steering wheel controls and the OEM SPDIF digital amplifier with fader adjustment via the steering wheel controls, and provides reverse trigger, speed pulse, and amp remote outputs with no wire cutting required. Product Overview The Aerpro SWKI2C is a CANBUS steering wheel control interface designed for various Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWKI2C is compatible with SW-type patch leads (sold separately), supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit, and retains the OEM SPDIF digital amplifier while allowing fader adjustment via the steering wheel controls. Voice Assistant support is available; if the steering wheel controls do not include a dedicated Voice Assistant button, the answer button functions as voice support instead, provided the aftermarket head unit and paired phone also support the Voice Assistant feature. Outputs include reverse trigger, speed pulse (pink), and amp remote. Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWKI2C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWKI2C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. OEM SPDIF Digital Amplifier Retention with Fader Adjustment: The SWKI2C retains the OEM SPDIF digital amplifier in the vehicle and allows fader adjustment to be performed via the steering wheel controls, preserving the amplified audio system and its adjustability after the head unit upgrade. CANBUS Interface: The SWKI2C uses a CANBUS interface for direct communication with the vehicle's CANBUS network, enabling reliable integration with the supported Hyundai and Kia SPDIF amplified platforms. Vehicle-Specific Plug - No Wire Cutting Required: The SWKI2C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM Phone Button Support: The SWKI2C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Voice Assistant Support: Voice Assistant support is available through the SWKI2C. If the steering wheel does not include a dedicated Voice Assistant button, the answer button functions as voice support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Reverse Trigger Output: A reverse trigger output enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Speed Pulse Output (Pink): A speed pulse output is provided via a pink wire for aftermarket head units that require a vehicle speed signal for navigation or speed-dependent volume functions. Amp Remote Output: An amp remote output is provided for triggering the retained OEM SPDIF digital amplifier when the head unit is powered on. Compatible with Aerpro APP8 Secondary ISO Harness: The SWKI2C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWKI2C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWKI2C Brand Aerpro Compatible Vehicles Hyundai Various Models (SPDIF Amplified), Kia Various Models (SPDIF Amplified) Interface Type CANBUS Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support Yes OEM SPDIF Digital Amplifier Retention Yes (with fader adjustment via SWC) Reverse Trigger Output Yes Park Brake Output No Speed Pulse Output Yes (Pink) Illumination Output No Amp Remote Output Yes Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWKI2C is engineered for various Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. It is not suitable for Hyundai or Kia vehicles without SPDIF digital amplification. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWKI2C require cutting of the factory wiring harness? No. The SWKI2C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWKI2C retain the OEM SPDIF digital amplifier? Yes. The SWKI2C retains the OEM SPDIF digital amplifier and allows fader adjustment to be performed via the steering wheel controls after the head unit upgrade, preserving the amplified audio system functionality. Is a SWC patch lead included with the SWKI2C? No. A steering wheel control patch lead is required to use the SWKI2C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. Does the SWKI2C support Voice Assistant functions? Yes. Voice Assistant support is available. If the steering wheel does not have a dedicated Voice Assistant button, the answer button functions as voice support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Is the SWKI2C suitable for non-amplified Hyundai and Kia vehicles? No. The SWKI2C is designed specifically for Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. Non-amplified vehicles require a different interface. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro FP9214 Double DIN Fascia Mitsubishi Colt 2004-2008 A vehicle-specific Double DIN fascia panel for the Mitsubishi Colt from 2004-2008, the FP9214 is designed to provide a factory-matched finish around an aftermarket Double DIN head unit installation. Product Overview The Aerpro FP9214 is a Double DIN fascia panel designed specifically for the Mitsubishi Colt from 2004-2008. It is designed to match the dashboard contour of the Colt, providing a factory-fit appearance around an aftermarket Double DIN head unit installation. Features & Benefits Mitsubishi Colt 2004-2008 Specific Dashboard Fit: The FP9214 is designed to match the dashboard contour of the Mitsubishi Colt from 2004-2008 precisely, providing a factory-fit appearance around the aftermarket head unit opening. Double DIN Opening: The FP9214 provides the correct Double DIN aperture for the installation of standard Double DIN aftermarket head units into the Mitsubishi Colt dashboard. Technical Specs Specification Detail SKU FP9214 Brand Aerpro Compatible Vehicles Mitsubishi Colt, 2004-2008 Application Double DIN Compatible With The FP9214 is designed for the Mitsubishi Colt from 2004-2008 with a Double DIN head unit installation. Confirm compatibility with your specific Colt variant and build date before purchase. Frequently Asked Questions Is the FP9214 compatible with Single DIN head units? No. The FP9214 provides a Double DIN aperture and is designed for standard Double DIN aftermarket head units only. Does the FP9214 include wiring harnesses or steering wheel control adaptors? No. The FP9214 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, and antenna adaptors need to be sourced separately for a complete installation. Which Mitsubishi Colt models is the FP9214 compatible with? The FP9214 is designed for the Mitsubishi Colt from 2004-2008. Confirm compatibility with your specific variant and build date before purchase. Does the FP9214 include mounting brackets? Mounting hardware details are not specified in the source data for this product. Confirm hardware inclusions with your supplier before purchase. What finish does the FP9214 have? The finish of the FP9214 is not specified in the source data. Confirm the finish with your supplier before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro LVDS053 LVDS Spare Harness to Suit AMUTO53 A replacement LVDS harness supplied as a spare part for the Aerpro AMUTO53 head unit kit. Product Overview The Aerpro LVDS053 is a spare LVDS harness designed specifically for use with the Aerpro AMUTO53 head unit kit. It is supplied as a replacement part for the LVDS harness included with the AMUTO53. Technical Specs Specification Detail SKU LVDS053 Brand Aerpro Compatible Unit Aerpro AMUTO53 Part Type LVDS Spare Harness Compatible With The LVDS053 is designed specifically as a spare harness for the Aerpro AMUTO53 head unit kit. Confirm compatibility with your specific unit before purchase. Frequently Asked Questions What is the LVDS053 used for? The LVDS053 is a replacement LVDS harness for the Aerpro AMUTO53 head unit kit, supplied as a spare part for replacement or repair purposes. Is the LVDS053 compatible with other Aerpro head unit kits? The LVDS053 is specified for the Aerpro AMUTO53 only. Confirm compatibility with your specific unit before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB6 Bonnet Mount UHF Antenna Bracket Ford Ranger and Everest An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Ford Ranger PX, PX2, and PX3 (2012-2021) and Everest UA and UA II (2015-2022), the APVCBB6 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB6 is a bonnet mount UHF antenna bracket designed specifically for the Ford Ranger PX, PX2, and PX3 from 2012-2021 and the Ford Everest UA and UA II from 2015-2022, covering all model variants including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Ford Ranger PX PX2 PX3 and Everest UA UA II Specific Design: The APVCBB6 is engineered specifically for the Ford Ranger PX, PX2, and PX3 from 2012-2021 and the Everest UA and UA II from 2015-2022, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Suits All Model Variants: The APVCBB6 is compatible with all model variants of the Ford Ranger and Everest across the supported date range, including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB6 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Ford Ranger and Everest across all variants. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB6 is Australian designed and engineered for the specific requirements of the Ford Ranger and Everest platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB6 Brand Aerpro Compatible Vehicles Ford Ranger PX 2012-2021, Ford Ranger PX2 2012-2021, Ford Ranger PX3 2012-2021, Ford Everest UA 2015-2022, Ford Everest UA II 2015-2022 Compatible Variants Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, XLT Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB6 is designed specifically for the Ford Ranger PX, PX2, and PX3 from 2012-2021 and the Ford Everest UA and UA II from 2015-2022, across all model variants including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Ranger or Everest variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB6 require drilling or vehicle modification? No. The APVCBB6 mounts to the passenger side bonnet hinge using the Ford Ranger and Everest's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Is the APVCBB6 compatible with all Ford Ranger and Everest variants including the Raptor? Yes. The APVCBB6 is confirmed compatible with all model variants across the supported Ford Ranger PX, PX2, and PX3 (2012-2021) and Everest UA and UA II (2015-2022) date ranges, including Raptor, Sport, Platinum, Black Edition, FX4, Wildtrak, XL, XLS, and XLT. Will the APVCBB6 affect bonnet operation or window wipers? No. The APVCBB6 is designed specifically for the Ford Ranger and Everest bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB6 accept? The APVCBB6 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread. This covers the majority of UHF CB antenna brands available in the Australian market. Is an antenna included with the APVCBB6? No. The APVCBB6 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB5 Bonnet Mount UHF Antenna Bracket Toyota Landcruiser 200 Series An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Landcruiser 200 Series (2016-2021), excluding GX models, the APVCBB5 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB5 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Landcruiser 200 Series from 2016-2021, excluding GX models. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Landcruiser 200 Series 2016-2021 Specific Design - Excluding GX Models: The APVCBB5 is engineered specifically for the Toyota Landcruiser 200 Series from 2016-2021, ensuring a precise fit to the passenger side bonnet hinge. This bracket does not suit GX models; confirm your specific variant before purchase. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB5 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Landcruiser 200 Series. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB5 is Australian designed and engineered for the specific requirements of the Toyota Landcruiser 200 Series platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB5 Brand Aerpro Compatible Vehicles Toyota Landcruiser 200 Series, 2016-2021 (excludes GX models) Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Important Note Does not suit GX models Compatible With The APVCBB5 is designed specifically for the Toyota Landcruiser 200 Series from 2016-2021, excluding GX models. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Landcruiser 200 Series variant and build date against the Aerpro vehicle fitment guide before purchase. This bracket does not suit GX models. Frequently Asked Questions Does the APVCBB5 suit all Toyota Landcruiser 200 Series variants? No. The APVCBB5 suits the Toyota Landcruiser 200 Series from 2016-2021 but does not suit GX models. Confirm your specific variant before purchase. Does the APVCBB5 require drilling or vehicle modification? No. The APVCBB5 mounts to the passenger side bonnet hinge using the Landcruiser 200 Series existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB5 affect bonnet operation or window wipers? No. The APVCBB5 is designed specifically for the Landcruiser 200 Series bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB5 accept? The APVCBB5 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is an antenna included with the APVCBB5? No. The APVCBB5 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB4 Bonnet Mount UHF Antenna Bracket Toyota Hilux and Fortuner An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Toyota Hilux and Fortuner (2015-on), the APVCBB4 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB4 is a bonnet mount UHF antenna bracket designed specifically for the Toyota Hilux and Fortuner from 2015 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Toyota Hilux and Fortuner 2015-On Specific Design: The APVCBB4 is engineered specifically for the Toyota Hilux and Fortuner from 2015 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB4 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Toyota Hilux and Fortuner. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB4 is Australian designed and engineered for the specific requirements of the Toyota Hilux and Fortuner platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB4 Brand Aerpro Compatible Vehicles Toyota Hilux 2015-On, Toyota Fortuner 2015-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB4 is designed specifically for the Toyota Hilux and Fortuner from 2015 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Hilux or Fortuner variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB4 require drilling or vehicle modification? No. The APVCBB4 mounts to the passenger side bonnet hinge using the Toyota Hilux and Fortuner's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB4 affect bonnet operation or window wipers? No. The APVCBB4 is designed specifically for the Toyota Hilux and Fortuner bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB4 accept? The APVCBB4 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB4 compatible with both the Hilux and Fortuner? Yes. The APVCBB4 is confirmed compatible with both the Toyota Hilux and Fortuner from 2015 onwards. Is an antenna included with the APVCBB4? No. The APVCBB4 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB7 Bonnet Mount UHF Antenna Bracket Mitsubishi Triton MR A vehicle-specific bonnet hinge UHF antenna bracket for the Mitsubishi Triton MR (2019-2023), the APVCBB7 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB7 is a bonnet mount UHF antenna bracket designed specifically for the Mitsubishi Triton MR from 2019-2023. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Mitsubishi Triton MR 2019-2023 Specific Design: The APVCBB7 is engineered specifically for the Mitsubishi Triton MR from 2019-2023, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB7 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Mitsubishi Triton MR. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Technical Specs Specification Detail SKU APVCBB7 Brand Aerpro Compatible Vehicles Mitsubishi Triton MR, 2019-2023 Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Inclusions Bracket Compatible With The APVCBB7 is designed specifically for the Mitsubishi Triton MR from 2019-2023, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific Triton MR variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB7 require drilling or vehicle modification? No. The APVCBB7 mounts to the passenger side bonnet hinge using the Mitsubishi Triton MR's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB7 affect bonnet operation or window wipers? No. The APVCBB7 is designed specifically for the Mitsubishi Triton MR bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB7 accept? The APVCBB7 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB7 compatible with earlier Triton generations? No. The APVCBB7 is designed specifically for the Mitsubishi Triton MR from 2019-2023. Earlier Triton generations use a different bonnet hinge profile and require a different bracket. Confirm your specific variant and build date before purchase. Is an antenna included with the APVCBB7? No. The APVCBB7 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB3 Bonnet Mount UHF Antenna Bracket GWM Ute Cannon An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the GWM Ute Cannon (2020-on), the APVCBB3 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB3 is a bonnet mount UHF antenna bracket designed specifically for the GWM Ute Cannon from 2020 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits GWM Ute Cannon 2020-On Specific Design: The APVCBB3 is engineered specifically for the GWM Ute Cannon from 2020 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB3 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the GWM Ute Cannon. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB3 is Australian designed and engineered for the specific requirements of the GWM Ute Cannon platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB3 Brand Aerpro Compatible Vehicles GWM Ute Cannon, 2020-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB3 is designed specifically for the GWM Ute Cannon from 2020 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Confirm your specific GWM Ute Cannon variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB3 require drilling or vehicle modification? No. The APVCBB3 mounts to the passenger side bonnet hinge using the GWM Ute Cannon's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB3 affect bonnet operation or window wipers? No. The APVCBB3 is designed specifically for the GWM Ute Cannon bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB3 accept? The APVCBB3 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. Is the APVCBB3 compatible with all GWM Ute Cannon variants from 2020 onwards? The APVCBB3 is designed for the GWM Ute Cannon from 2020 onwards. Confirm your specific variant and build date against the Aerpro vehicle fitment guide before purchase. Is an antenna included with the APVCBB3? No. The APVCBB3 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APVCBB8 Bonnet Mount UHF Antenna Bracket Mazda BT-50 2020-On An Australian designed and engineered vehicle-specific bonnet hinge UHF antenna bracket for the Mazda BT-50 (2020-on), the APVCBB8 is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish and mounts to the passenger side bonnet hinge using existing mounting points with no vehicle modification required. Product Overview The Aerpro APVCBB8 is a bonnet mount UHF antenna bracket designed specifically for the Mazda BT-50 from 2020 onwards. It mounts to the passenger side bonnet hinge using the vehicle's existing mounting points, eliminating the need for drilling or complex modifications. The bracket is constructed from a single piece of press-bent 4mm steel with a matte black powder-coated finish, providing durability suitable for both standard and heavy-duty applications. The 18mm antenna mounting hole accepts all brands of UHF CB antennas, and a 5mm cable slot allows the antenna to be installed or removed easily without fully dismantling the mounting setup. The bracket does not obstruct bonnet operation or interfere with window wipers. Features & Benefits Mazda BT-50 2020-On Specific Design: The APVCBB8 is engineered specifically for the Mazda BT-50 from 2020 onwards, ensuring a precise fit to the passenger side bonnet hinge without the fitment compromises of universal brackets. Owners of the earlier Mazda BT-50 (2011-2019) should refer to the APVCBB23. Passenger Side Bonnet Hinge Mount - No Modification Required: The APVCBB8 mounts directly to the passenger side bonnet hinge using the vehicle's existing mounting points. No drilling, cutting, or complex modifications to the vehicle are required, making it a hassle-free DIY installation. Does Not Obstruct Bonnet or Window Wipers: The bracket is designed to maintain the full operating range of the bonnet and does not interfere with window wiper function, preserving the vehicle's standard functionality after installation. Single Piece Press-Bent 4mm Steel Construction: The bracket is formed from a single piece of 4mm steel using a press-bent process, providing a rigid, strong, and reliable mounting platform suited to both on-road and off-road heavy-duty applications. Matte Black Powder-Coated Finish: The matte black powder-coated finish provides corrosion resistance and a discreet, low-profile appearance that suits the exterior styling of the Mazda BT-50 from 2020 onwards. 18mm Antenna Mounting Hole - Universal UHF CB Antenna Compatibility: The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using the standard 18mm mounting thread, providing flexibility in antenna selection. 5mm Cable Slot for Easy Antenna Install and Removal: The 5mm cable slot allows the antenna coax cable to be fed through the bracket without requiring the cable connector to be removed, enabling easier antenna installation and removal when needed. Australian Designed and Engineered: The APVCBB8 is Australian designed and engineered for the specific requirements of the Mazda BT-50 2020-on platform and Australian off-road and heavy-duty use conditions. Technical Specs Specification Detail SKU APVCBB8 Brand Aerpro Compatible Vehicles Mazda BT-50, 2020-On Mounting Position Passenger Side Bonnet Hinge Metal Type 4mm Steel Finish Matte Black Powder-Coated Antenna Mounting Hole 18mm Cable Slot Size 5mm Construction Single Piece Press-Bent Application Standard and Heavy-Duty Design Origin Australian Designed and Engineered Inclusions Bracket Compatible With The APVCBB8 is designed specifically for the Mazda BT-50 from 2020 onwards, mounting to the passenger side bonnet hinge using existing mounting points. The 18mm antenna mounting hole is compatible with all brands of UHF CB antennas using a standard 18mm thread. Owners of the Mazda BT-50 from 2011-2019 should refer to the APVCBB23. Confirm your specific BT-50 variant and build date against the Aerpro vehicle fitment guide before purchase. Frequently Asked Questions Does the APVCBB8 require drilling or vehicle modification? No. The APVCBB8 mounts to the passenger side bonnet hinge using the Mazda BT-50's existing mounting points, with no drilling, cutting, or modification to the vehicle required. Will the APVCBB8 affect bonnet operation or window wipers? No. The APVCBB8 is designed specifically for the Mazda BT-50 2020-on bonnet hinge profile and does not obstruct bonnet operation or interfere with window wiper function. What size antenna thread does the APVCBB8 accept? The APVCBB8 has an 18mm antenna mounting hole, compatible with all standard UHF CB antennas using an 18mm thread, covering the majority of UHF CB antenna brands available in the Australian market. What is the difference between the APVCBB8 and the APVCBB23? Both are vehicle-specific bonnet mount UHF antenna brackets for the Mazda BT-50, sharing the same 4mm steel construction, matte black powder-coated finish, 18mm antenna hole, and 5mm cable slot. The APVCBB8 suits the Mazda BT-50 from 2020 onwards, while the APVCBB23 suits the Mazda BT-50 from 2011-2019. The two generations use different bonnet hinge profiles requiring separate brackets. Is an antenna included with the APVCBB8? No. The APVCBB8 includes the bracket only. A UHF CB antenna must be sourced separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less