Aerpro APC173 Brake Light Reverse Camera Fiat Ducato Peugeot Boxer A clean, OEM-style reverse camera solution for the Fiat Ducato and Peugeot Boxer, the APC173 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC173 is Aerpro's vehicle-specific brake light reverse camera, engineered for Fiat Ducato (2015-2021) and Peugeot Boxer (2020-on) models. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC173 performs reliably in all weather and climate conditions. Please note that the APC173 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Fiat Ducato and Peugeot Boxer Specific Fitment: Engineered for the Fiat Ducato (2015-2021) and Peugeot Boxer (2020-on), the APC173 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC173 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC173 Brand Aerpro Compatible Vehicle Fiat Ducato (2015-2021), Peugeot Boxer (2020-on) Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC173 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC173 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Fiat Ducato and Peugeot Boxer. Note that the APC173 is not compatible with the factory head units in either vehicle and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC173 compatible with both Fiat Ducato and Peugeot Boxer models? Yes. The APC173 is compatible with Fiat Ducato models from 2015-2021 and Peugeot Boxer models from 2020-on. Both vehicles share a compatible brake light housing profile within these model year ranges. Confirm your vehicle's specific model year before purchase to ensure correct fitment. Is the APC173 compatible with the factory head units in the Fiat Ducato or Peugeot Boxer? No. The APC173 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in either the Fiat Ducato or Peugeot Boxer. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC173 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC175 Brake Light Reverse Camera Volkswagen Crafter A clean, OEM-style reverse camera solution for the Volkswagen Crafter, the APC175 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC175 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Volkswagen Crafter models from 2007-2016. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. A foam gasket and rubber O-ring are also included to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC175 is built to perform reliably in all weather and climate conditions. Please note that the APC175 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Crafter Specific Fitment: Engineered exclusively for the Volkswagen Crafter (2007-2016), the APC175 is a direct OEM replacement for the factory brake light housing, providing a clean factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC175 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket and Rubber O-Ring: A foam gasket and rubber O-ring are included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC175 Brand Aerpro Compatible Vehicle Volkswagen Crafter, 2007-2016 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC175 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Rubber O-ring Goes Well With The APC175 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Crafter. Note that the APC175 is not compatible with the factory Volkswagen Crafter head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC175 compatible with the factory Volkswagen Crafter head unit? No. The APC175 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Volkswagen Crafter. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What are the foam gasket and rubber O-ring for? The foam gasket and rubber O-ring are included to create a weatherproof seal between the APC175 camera housing and the factory brake light mounting location. These components prevent water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions. Is a trigger wire included, and is one needed? A trigger wire is not included with the APC175. Reverse camera activation is typically managed through the head unit's reverse trigger input, which is connected to the vehicle's reverse light circuit via the installation harness. Confirm the reverse trigger wiring arrangement with the head unit's installation instructions for the specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC176 Brake Light Reverse Camera VW Transporter Twin Door A clean, OEM-style reverse camera solution for the Volkswagen Transporter T5, T6, and T6.1 with twin rear doors, the APC176 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC176 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Volkswagen Transporter T5 (2010-2015), T6 (2016-2019), and T6.1 (2020-on) models in twin rear door configuration. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. A foam gasket is also included to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC176 performs reliably in all weather and climate conditions. Please note that the APC176 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Transporter T5/T6/T6.1 Specific Fitment: Engineered exclusively for the Volkswagen Transporter T5 (2010-2015), T6 (2016-2019), and T6.1 (2020-on) in twin rear door configuration, the APC176 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC176 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC176 Brand Aerpro Compatible Vehicle VW Transporter T5 (2010-2015), T6 (2016-2019), T6.1 (2020-on) Vehicle Configuration Twin Rear Doors Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC176 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC176 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Transporter. Note that the APC176 is not compatible with the factory Volkswagen Transporter head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Transporter T6 and T6.1 models in single rear door configuration, the APC178 is the correct alternative. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC176 and the APC178? Both cameras are engineered for the Volkswagen Transporter and share the same specification, output options, and installation approach. The APC176 is designed for twin rear door T5/T6/T6.1 models from 2010-on, while the APC178 is designed for single rear door T6/T6.1 models from 2016-on. The brake light housing profile differs between single and twin rear door configurations, so it is important to confirm your vehicle's door configuration before purchase. Is the APC176 compatible with all three Transporter generations? Yes. The APC176 is compatible with Volkswagen Transporter T5 (2010-2015), T6 (2016-2019), and T6.1 (2020-on) models in twin rear door configuration. The twin rear door brake light housing is common across all three generations within this date range. Is the APC176 compatible with the factory Volkswagen Transporter head unit? No. The APC176 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC177 Brake Light Reverse Camera Volkswagen Caddy A clean, OEM-style reverse camera solution for the Volkswagen Caddy, the APC177 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC177 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Volkswagen Caddy models from 2005-2015. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. A foam gasket is also included to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC177 performs reliably in all weather and climate conditions. Please note that the APC177 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Caddy Specific Fitment: Engineered exclusively for the Volkswagen Caddy (2005-2015), the APC177 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC177 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC177 Brand Aerpro Compatible Vehicle Volkswagen Caddy, 2005-2015 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC177 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC177 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Caddy. Note that the APC177 is not compatible with the factory Volkswagen Caddy head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC177 compatible with Volkswagen Caddy models outside the 2005-2015 range? No. The APC177 is specifically engineered for Volkswagen Caddy models from 2005-2015. Caddy models outside this year range use a different brake light housing profile and are not compatible with this camera. Confirm your vehicle's model year before purchase. Is the APC177 compatible with the factory Volkswagen Caddy head unit? No. The APC177 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Volkswagen Caddy. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC177 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC178 Brake Light Reverse Camera VW Transporter T6 A clean, OEM-style reverse camera solution for the Volkswagen Transporter T6 and T6.1, the APC178 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC178 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Volkswagen Transporter T6 (2016-2019) and T6.1 (2020-on) models in single rear door configuration. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC178 performs reliably in all weather and climate conditions. Please note that the APC178 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Transporter T6/T6.1 Specific Fitment: Engineered exclusively for the Volkswagen Transporter T6 (2016-2019) and T6.1 (2020-on) in single rear door configuration, the APC178 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC178 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC178 Brand Aerpro Compatible Vehicle Volkswagen Transporter T6 (2016-2019), T6.1 (2020-on) Vehicle Configuration Single Rear Door Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC178 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC178 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Transporter T6 and T6.1. Note that the APC178 is not compatible with the factory Volkswagen Transporter head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC178 compatible with both the T6 and T6.1 Transporter models? Yes. The APC178 is compatible with Volkswagen Transporter T6 models from 2016-2019 and T6.1 models from 2020-on, both in single rear door configuration. The brake light housing is common across both generations, making the APC178 a direct replacement for either model year range. Is the APC178 compatible with dual rear door Transporter models? No. The APC178 is specifically designed for single rear door Volkswagen Transporter T6 and T6.1 models only. The brake light housing geometry differs between single and dual rear door configurations, and this camera is engineered to replace the single door variant. Confirm your vehicle's door configuration before purchase. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. Is a trigger wire included, and is one needed? A trigger wire is not included with the APC178. Reverse camera activation is typically managed through the head unit's reverse trigger input, which is connected to the vehicle's reverse light circuit via the installation harness. Confirm the reverse trigger wiring arrangement with the head unit's installation instructions for the specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC179 Brake Light Reverse Camera VW Transporter T5 A clean, OEM-style reverse camera solution for the Volkswagen Transporter T5, the APC179 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC179 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Volkswagen Transporter T5 models from 2004-2015. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a rubber O-ring for a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC179 performs reliably in all weather and climate conditions. Please note that the APC179 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Transporter T5 Specific Fitment: Engineered exclusively for the Volkswagen Transporter T5 (2004-2015), the APC179 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC179 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Rubber O-Ring: A rubber O-ring is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC179 Brand Aerpro Compatible Vehicle Volkswagen Transporter T5, 2004-2015 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC179 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Rubber O-ring Goes Well With The APC179 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Transporter T5. Note that the APC179 is not compatible with the factory Volkswagen Transporter head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Transporter T5 models from 2010-2015 in twin rear door configuration, the APC176 also covers this vehicle range alongside the APC179. Confirm the correct model for your specific Transporter configuration with the supplier. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions How does the APC179 differ from the APC176 for the Volkswagen Transporter? The APC176 covers Volkswagen Transporter T5 (2010-2015), T6 (2016-2019), and T6.1 (2020-on) models in twin rear door configuration. The APC179 is specifically engineered for the Volkswagen Transporter T5 (2004-2015) and covers the earlier T5 production years from 2004 that the APC176 does not. Confirm your vehicle's model year and door configuration with the supplier to determine the correct camera for your specific Transporter. Is the APC179 compatible with the factory Volkswagen Transporter T5 head unit? No. The APC179 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Volkswagen Transporter T5. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the rubber O-ring for? The rubber O-ring is included to create a weatherproof seal between the APC179 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC181 Spare Wheel Reverse Camera Jeep Wrangler 2007-On A clean, factory-style reverse camera solution for the Jeep Wrangler, the APC181 mounts discreetly to the factory spare wheel carrier to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without any permanent vehicle modification. Product Overview The APC181 is Aerpro's vehicle-specific spare wheel mounted reverse camera, engineered exclusively for Jeep Wrangler models from 2007-on. Rather than replacing a brake light or tailgate handle, the APC181 mounts directly to the factory spare wheel carrier, providing a seamless installation position that requires no permanent modification to the vehicle. The durable metal housing provides a robust, weather-resistant construction suited to the Wrangler's off-road and outdoor use profile. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC181 performs reliably in all weather and climate conditions. Please note that the APC181 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Jeep Wrangler Specific Fitment: Engineered exclusively for the Jeep Wrangler (2007-on), the APC181 is designed to mount to the factory spare wheel carrier, providing a factory-style installation that integrates with the vehicle's original exterior styling without permanent modification. Spare Wheel Carrier Mount, No Permanent Modification Required: The camera mounts discreetly to the spare wheel carrier without drilling additional holes or making permanent modifications to the vehicle body, making it a clean and reversible installation. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking. The spare wheel carrier position places the camera at a height and angle well suited to capturing the full rear view behind the Wrangler. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, mud, water crossings, and the demanding off-road environments the Jeep Wrangler is regularly used in. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC181 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and off-road conditions. Durable Metal Housing: The metal housing construction provides the structural resilience needed to withstand the vibration, impacts, and harsh outdoor conditions associated with regular off-road use in a Jeep Wrangler. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear spare wheel carrier to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC181 Brand Aerpro Compatible Vehicle Jeep Wrangler, 2007-on Installation Position Spare Wheel Mount Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC181 Spare Wheel Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC181 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Jeep Wrangler. Note that the APC181 is not compatible with the factory Jeep Wrangler head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Why is the spare wheel carrier used as the mounting position rather than a brake light or tailgate handle? The Jeep Wrangler's rear-mounted spare wheel carrier is the most practical and OEM-compatible camera mounting location for this vehicle. The rear door opens to the side on the Wrangler, meaning a brake light or tailgate handle mount would rotate with the door and not provide a stable rearward-facing view when the door is closed. The spare wheel carrier remains fixed relative to the rear of the vehicle, providing a consistent camera position regardless of door movement. Is the APC181 compatible with Jeep Wrangler models across all generations from 2007-on? The APC181 is specified for Jeep Wrangler models from 2007-on. Confirm your specific Wrangler generation and build year with the supplier before purchase, as spare wheel carrier profile variations between JK (2007-2018) and JL (2018-on) generations may affect fitment. Is the APC181 compatible with the factory Jeep Wrangler head unit? No. The APC181 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Jeep Wrangler. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC182 Brake Light Reverse Camera Mercedes Vito W447 Barn Door A clean, OEM-style reverse camera solution for the Mercedes Vito W447 in barn door configuration, the APC182 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC182 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Mercedes Vito W447 models from 2015-on in barn door configuration. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC182 performs reliably in all weather and climate conditions. The APC182 can also be adapted to display on the original factory Mercedes Vito W447 screen using the optional APVMC23 display adaptor, sold separately. Features & Benefits Mercedes Vito W447 Barn Door Specific Fitment: Engineered exclusively for the Mercedes Vito W447 (2015-on) in barn door configuration, the APC182 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC182 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Adaptable to Factory Screen: The APC182 can be connected to display on the original Mercedes Vito W447 factory screen using the optional APVMC23 display adaptor, sold separately. Technical Specs Specification Detail SKU APC182 Brand Aerpro Compatible Vehicle Mercedes Vito W447, 2015-on Vehicle Configuration Barn Door Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen Yes (requires APVMC23, sold separately) What's in the Box 1x APC182 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC182 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Mercedes Vito W447. For installations retaining the factory Mercedes Vito W447 screen, the optional APVMC23 display adaptor is required and sold separately. For Mercedes Vito W447 models in single door configuration, the APC188 is the correct alternative. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC182 and the APC188? Both cameras are engineered for the Mercedes Vito W447 (2015-on) as brake light housing replacements and share the same specification, output options, and installation approach. The APC182 is designed for barn door vehicle configurations, while the APC188 is designed for single door configurations. The brake light housing profile differs between barn door and single door variants, so confirm your vehicle's door configuration before purchase. Can the APC182 display on the factory Mercedes Vito W447 screen? Yes, with an additional adaptor sold separately. The APVMC23 display adaptor is required to connect the APC182 to the original factory Mercedes Vito W447 screen. Without the APVMC23, the camera connects to an aftermarket head unit or monitor via the included 4-pin to RCA adapter. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. Is a trigger wire included, and is one needed? A trigger wire is not included with the APC182. Reverse camera activation is typically managed through the head unit's reverse trigger input, which is connected to the vehicle's reverse light circuit via the installation harness. Confirm the reverse trigger wiring arrangement with the head unit's installation instructions for the specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC188 Brake Light Reverse Camera Mercedes Vito W447 A clean, OEM-style reverse camera solution for the Mercedes Vito W447, the APC188 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC188 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Mercedes Vito W447 models from 2015-on in single door configuration. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC188 is built to perform reliably in all weather and climate conditions. The camera can also be adapted to display on the original factory screen using the optional APVMC23 display adaptor (sold separately). Features & Benefits Mercedes Vito W447 Specific Fitment: Engineered exclusively for the Mercedes Vito W447 (2015-on) in single door configuration, the APC188 is a direct OEM replacement for the factory brake light housing, providing a clean factory-finish installation that is indistinguishable from the original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and off-road conditions. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC188 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily automotive use. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Adaptable to Factory Screen: The APC188 can be connected to display on the original Mercedes Vito factory screen using the optional APVMC23 display adaptor, sold separately. Technical Specs Specification Detail SKU APC188 Brand Aerpro Compatible Vehicle Mercedes Vito W447, 2015-on Vehicle Configuration Single Door Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen Yes (requires APVMC23, sold separately) What's in the Box 1x APC188 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC188 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Mercedes Vito W447. For installations retaining the factory Mercedes Vito screen, the optional APVMC23 display adaptor is required and sold separately. A trigger wire is not included with this camera; reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC188 compatible with both single and dual rear door Vito models? No. The APC188 is specifically designed for Mercedes Vito W447 single door models only. The brake light housing geometry differs between single and dual door configurations, and this camera is engineered to replace the single door variant. Confirm your vehicle's door configuration before purchase. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. Does the APC188 work with the factory Mercedes Vito screen? Yes, with an additional accessory. The APC188 can be adapted to display on the original Mercedes Vito factory screen using the optional APVMC23 display adaptor, sold separately. Without the APVMC23, the camera connects to an aftermarket head unit or monitor via the included 4-pin to RCA adapter. Is a trigger wire included, and is one needed? A trigger wire is not included with the APC188. Reverse camera activation is typically managed through the head unit's reverse trigger input, which is connected to the vehicle's reverse light circuit via the installation harness. Confirm the reverse trigger wiring arrangement with the head unit's installation instructions for the specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Converts 24V truck power to 12V for car stereos and accessories Description The Aerpro APC20A 20 Amp 24V to 12V DC Power Converter reduces voltage from 24 volts to 12 volts, enabling installation of 12V equipment into 24V vehicles such as trucks. Featuring both constant and accessory wires, APC20A is suitable for use when installing an aftermarket stereo and other 12V accessories that require a constant and accessory power feed. Maximum power output for this unit is 20 amps. Specification Input Voltage: 24V DC Input Voltage Range: 18-40V DC Output Voltage: 13.8V DC Output Current: 20A Efficiency: > 95% Power Rate: 276W Peak Current: 130% Inputs: Constant & Accessories Outputs: Constant & Accessories Standby Current: 20mA Working Temp: -35C to +80C Waterproof Rate: IP68 Over Current Protection: Yes Over Voltage Protection: Yes Over Heat Protection: Yes Short Circuit Protection: Yes Device Size: 74x74x34mm Weight: 300g Housing: Die-Cast Aluminum Features 20 Amp max output current Steps down power from 24V to 12V Includes both constant and accessory wires Suitable for installing 12V accessories into 24V vehicles Over/low voltage, short circuit, over current protection Inline fuse protection Advanced switch mode design Compact and light weight IP68 Dustproof / Waterproof Easy and quick installation Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!  

Read more less

Aerpro APC22 Tailgate Handle Reverse Camera Ford Ranger Mazda BT-50 A clean, OEM-style reverse camera solution for the Ford Ranger and Mazda BT-50, the APC22 replaces the factory tailgate handle to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC22 is Aerpro's vehicle-specific tailgate handle reverse camera, engineered for Ford Ranger PX (2012-2015), PX MkII (2015-2018), and PX MkIII (2018-2021) models, as well as Mazda BT-50 (2012-2018). It replaces the factory tailgate handle directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The durable metal housing integrates with the vehicle's original exterior styling for a clean, factory-matched appearance. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC22 performs reliably in all weather and climate conditions. The APC22 can also be adapted to display on the original factory screen in Ford Ranger models equipped with a 4.2" factory display using the optional APVFD03 adaptor, sold separately. Features & Benefits Ford Ranger and Mazda BT-50 Specific Fitment: Engineered for Ford Ranger PX, PX MkII, and PX MkIII models from 2012-2021 and Mazda BT-50 from 2012-2018, the APC22 is a direct OEM replacement for the factory tailgate handle, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Tailgate Handle Replacement Design: The camera mounts discreetly in place of the factory tailgate handle without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, off-road conditions, and wash-down environments typical of ute applications. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC22 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Durable Metal Housing: The metal housing construction provides structural resilience to withstand the demands of daily ute use, including exposure to impact, vibration, and harsh outdoor conditions. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the tailgate to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Adaptable to Factory Screen: Ford Ranger models equipped with a 4.2" factory display can connect the APC22 to display on the original factory screen using the optional APVFD03 display adaptor, sold separately. Technical Specs Specification Detail SKU APC22 Brand Aerpro Compatible Vehicles Ford Ranger PX (2012-2015), PX MkII (2015-2018), PX MkIII (2018-2021), Mazda BT-50 (2012-2018) Installation Position Tailgate Handle (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen Yes (Ford Ranger with 4.2" display requires APVFD03, sold separately) Factory Screen Adaptor Compatibility Vehicle Condition Required Adaptor Ford Ranger PX / PX MkII / PX MkIII Equipped with 4.2" factory display APVFD03 (sold separately) Mazda BT-50 Not adaptable to factory screen N/A What's in the Box 1x APC22 Tailgate Handle Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC22 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for both the Ford Ranger and Mazda BT-50. For Ford Ranger models with a 4.2" factory display where the factory screen is to be retained, the optional APVFD03 display adaptor is required and sold separately. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Does the APC22 fit both the Ford Ranger and Mazda BT-50? Yes. The APC22 is compatible with Ford Ranger PX (2012-2015), PX MkII (2015-2018), and PX MkIII (2018-2021) as well as Mazda BT-50 (2012-2018). These vehicles share a common tailgate handle profile across the listed model years, making the APC22 a direct OEM replacement for both platforms. Can the APC22 display on the factory Ford Ranger screen? Yes, for Ford Ranger models equipped with a 4.2" factory display. The APVFD03 display adaptor is required and sold separately to connect the APC22 to the original factory screen. Confirm whether your specific Ranger is fitted with the 4.2" display before purchasing the adaptor. For Mazda BT-50 models, factory screen adaptation is not supported. Does replacing the tailgate handle affect the handle's open and close function? The APC22 is a direct OEM replacement for the factory tailgate handle, designed to maintain the original handle's functionality while integrating the reverse camera into the housing. The tailgate open and close function is retained after installation. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V-To-12V Converter For Multimedia Head Units! Aerpro APC24 24V-To-12V Power ConverterThe Aerpro APC24 is a versatile 24V to 12V power converter designed to enable seamless installation of 12V multimedia head units in 24V vehicles. Combining a single-channel 5A reducer with a 4-channel 24V to 12V optical relay module, it provides dedicated 12V outputs for accessories, illumination, reverse trigger, and an additional 12V output for triggering other low-power devices (up to 1A). With ISO connectors, installation is seamless, ensuring broad compatibility with aftermarket head units. It also supports Aerpro steering wheel control adaptors, making it a practical solution for upgrading your vehicle’s infotainment system. Features: Enables Installation Of 12V Multimedia Head Units In 24V Vehicles Retains Accessories, Illumination & Reverse Trigger Functions Includes Spare 12V Output (1A Max) For Triggering Additional Devices ISO Connectors For Simple Installation Compatible With Aerpro Steering Wheel Control Harnesses Specification: Input Voltage: 24V Output Voltage: 12V Maximum Output Current: 5A (Head Unit), 1A (Relay Outputs) Connectors: ISO Connectors Important Information: Do not use relay outputs to power devices that draw more than 1A. Head unit constant power is wired from the 5A reducer.   Legendary Products & Support From Authorized Dealers When you choose Frankie's BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose Wisely. Buy From Frankie's BrandBeast today!

Read more less