STEDI ST-04-G4-006 G4 Dual Colour Work Light White/Amber Combining a 5700K white flood beam and a soft, non-dazzling 1800K warm amber diffused beam in a single housing, the STEDI G4 Dual Colour delivers versatile multi-purpose lighting for camping, work, and off-road applications where two distinct lighting modes are needed from one light. Product Overview The ST-04-G4-006 is STEDI's G4 Dual Colour Work Light, powered by four CREE XP-L2 LEDs split equally between white and amber outputs. The white flood beam operates at 5700K, producing 2000 raw lumens and 1500 tested lumens with a flood zone 60 metres long and 26 metres wide at 1 LUX, suited to work tasks and area illumination requiring bright, high-contrast white light. The amber beam operates at 1800K, producing 1340 raw lumens and 1000 tested lumens with a soft, diffused zone reaching 24 metres in length and 23 metres in width at 1 LUX. The warm 1800K amber output is non-dazzling and prioritises diffusion over reach, making it ideal for campsite ambience, signalling, and situations where glare reduction and reduced impact on night vision are the priority. Each channel draws 1.6A at 13.5V independently, allowing white and amber to be used separately or simultaneously from the single housing via the included 3-pin DT connector. The G4 is rated IP68 and IP69K, shock tested at 30Gs and vibration tested at 5Gs, and CISPR 25 C3 certified for electromagnetic compatibility. Compatible with both 12V and 24V systems. The die-cast aluminium housing carries a premium AkzoNobel powder coat finish with a polycarbonate lens, stainless steel hardware and bracket, and a STEDI protective cover included. Rated for 50,000 hours LED lifespan. Features & Benefits Dual Colour White and Amber Output: The G4 Dual Colour houses two independent LED colour channels in a single unit. The 5700K white channel provides bright, high-contrast work illumination, and the 1800K amber channel provides a soft, warm, non-dazzling diffused light suited to camping, signalling, and reduced-glare environments. 5700K White Flood at 60m x 26m at 1 LUX: The white channel delivers 1500 tested lumens in a flood beam covering 60 metres in length and 26 metres in width at the 1 LUX threshold, providing broad, even white light coverage for work and task illumination. 1800K Warm Amber at 24m x 23m at 1 LUX: The amber channel delivers 1000 tested lumens in an evenly diffused beam covering 24 metres in length and 23 metres in width at the 1 LUX threshold. The 1800K colour temperature produces a warm, soft light that does not trigger glare responses, preserves night vision, and creates a comfortable campsite ambience. Non-Dazzling Amber Beam: The 1800K amber output is specifically described as soft and non-dazzling, making it suitable for use in campsite environments where maintaining the comfort of other people nearby and preserving the driver's own night vision is important. Independent Channel Control via 3-Pin DT Connector: The 3-pin DT male connector allows white and amber channels to be controlled independently, enabling white-only, amber-only, or simultaneous operation depending on the installation wiring and switch configuration. 4x CREE XP-L2 LEDs: Two CREE XP-L2 LEDs per colour channel provide consistent optical performance and thermal management for both white and amber outputs throughout the rated 50,000-hour lifespan. IP68 and IP69K Dual Rating: The dual IP68 and IP69K certification confirms complete dust and waterproof protection against continuous water immersion and high-pressure, high-temperature water jet wash-down. CISPR 25 C3 Certified: CISPR 25 C3 electromagnetic compatibility certification suppresses interference with onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. 30G Shock and 5G Vibration Tested: Independently tested to withstand 30G shock loads and 5G sustained vibration, confirming structural and electrical integrity under the mechanical demands of off-road and work vehicle applications. 12V and 24V Compatibility: Operates on both 12V and 24V electrical systems, making it compatible with camping vehicles, 4WDs, trucks, and agricultural machinery. Premium AkzoNobel Powder Coat Finish: The housing carries a premium AkzoNobel powder coat, known for its adhesion, hardness, and resistance to chipping, UV degradation, and chemical exposure in outdoor applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The die-cast aluminium housing provides structural rigidity and thermal management, and the polycarbonate lens provides impact resistance and optical clarity throughout the rated lifespan. Technical Specs Specification Detail SKU ST-04-G4-006 Brand STEDI LED 4x CREE XP-L2 LED Power Output (White) 2 x 10W LED Power Output (Amber) 2 x 10W Raw Lumens (White) 2,000 lm Raw Lumens (Amber) 1,340 lm Tested Lumens (White) 1,500 lm Tested Lumens (Amber) 1,000 lm Beam Type Flood 1 LUX Distance (White) 60m length x 26m width 1 LUX Distance (Amber) 24m length x 23m width Colour Temperature (White) 5700K Colour Temperature (Amber) 1800K Operating Voltage 12V and 24V Amp Draw (White) 1.6A @ 13.5V Amp Draw (Amber) 1.6A @ 13.5V IP Rating IP68 and IP69K CISPR Rating CISPR 25 C3 Shock Tested 30G Vibration Tested 5G Housing Material Die-cast aluminium Lens Material Polycarbonate Finish Premium AkzoNobel powder coat Hardware Stainless steel LED Lifespan 50,000 hours Weight 1.002 kg What's in the Box 1x STEDI G4 Dual Colour Light 1x STEDI Black Cover 1x Stainless Steel Hardware 1x Stainless Steel Bracket 1x 3-Pin DT Male Connector Goes Well With The ST-04-G4-006 is the ideal single-light solution for touring and camping setups where both task lighting and campsite ambience are needed from a single mounting point. It pairs naturally with other STEDI G4 lights in the same range for multi-light installations, and with STEDI light bars and driving lights on the same vehicle. A dual-channel switch or relay harness is required to control white and amber channels independently, and a 3-pin DT female connector harness is needed to connect to the included 3-pin DT male connector on the light. Frequently Asked Questions Can the white and amber channels be operated independently? Yes. The 3-pin DT connector provides separate circuit connections for the white and amber channels, allowing each to be switched on and off independently via a suitable dual-channel switch or relay harness. This allows white-only, amber-only, or simultaneous white and amber operation depending on the installation wiring configuration. What is the 1800K amber beam suited for? The 1800K warm amber beam is a soft, non-dazzling diffused output suited to campsite illumination, signalling, and any situation where reducing glare and preserving night vision are important. At 1800K, the amber light does not trigger the same glare response as white light and is generally more comfortable for people nearby in a campsite or work environment. It is not suited to long-range task lighting due to its shorter reach compared to the white channel. How does the G4 Dual Colour differ from the other G4 variants? The G4 Dual Colour (ST-04-G4-006) is the only variant in the G4 range with two independently controllable colour channels. All other G4 variants produce a single white 5700K output in spot, flood, hybrid, or ultra-flood beam patterns. The Dual Colour divides the four CREE XP-L2 LEDs between white and amber, so each channel has half the total output of a single-colour G4 variant at 1500 tested lumens white and 1000 tested lumens amber, compared to 3000 tested lumens across the single-colour variants. What does IP69K add to IP68 protection? IP68 certifies the light is sealed against continuous water immersion at specified depth and duration. IP69K is an additional certification covering high-pressure and high-temperature water jet wash-down, encountered when hosing down vehicles and equipment. The G4's dual IP68 and IP69K rating confirms it is protected against both scenarios. What connector type does the G4 Dual Colour use, and why is it different from the other G4 variants? The G4 Dual Colour uses a 3-pin DT male connector rather than the 2-pin connector used on single-colour G4 variants. The additional pin provides the independent circuit connection required for the second colour channel. A compatible 3-pin DT female connector wiring harness is required to connect the light to the vehicle's electrical system and switch configuration.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI ST-04-G6-001 G6 Black Flood Work Light The most powerful single-unit flood light in the STEDI G Series, the G6 Black Flood delivers 4600 tested lumens from six CREE XP-L2 LEDs across a flood zone 74 metres long and 52 metres wide at 1 LUX, built for industrial, agricultural, and heavy-duty worksite environments. Product Overview The ST-04-G6-001 is STEDI's G6 Black Flood Work Light, the highest-output model in the STEDI G Series, powered by six CREE XP-L2 LEDs producing 6000 raw lumens and 4600 tested lumens through an all-new optic configuration at 5700K white light. The powerful flood beam reaches 74 metres in length and 52 metres in width at the 1 LUX threshold, providing large-scale worksite illumination suited to industrial facilities, agricultural machinery, and heavy-duty work environments where broad, high-intensity near-field coverage is the priority. The 5700K colour temperature delivers brilliant white light with reduced glare and eye strain for extended heavy-use sessions. Rated IP68 and IP69K for complete dust and waterproof protection including high-pressure wash-down environments, shock tested at 30Gs and vibration tested at 5Gs for reliable performance under the most demanding conditions. CISPR 25 C3 certification suppresses electromagnetic interference, protecting onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. Compatible with both 12V and 24V systems, drawing 4.8A at 13.5V. The die-cast aluminium housing carries a premium AkzoNobel powder coat finish in black with a polycarbonate lens, stainless steel hardware and bracket, and a STEDI protective cover included. Rated for 50,000 hours LED lifespan. Features & Benefits 6x CREE XP-L2 LEDs at 60W Total: Six premium CREE XP-L2 LED emitters with an all-new optic configuration produce 6000 raw lumens and 4600 independently tested lumens, delivering the highest output of any single-unit G Series work light for large-scale industrial and agricultural illumination. Flood Beam at 1 LUX, 74m x 52m: The all-new optic configuration produces a flood zone of 74 metres in length and 52 metres in width at the 1 LUX threshold, providing worksite-scale illumination that covers large ground areas around machinery, vehicles, and equipment with a single light unit. 5700K White Light: The 5700K colour temperature produces brilliant white light that accurately renders colours, provides high contrast for detail work, and reduces glare and eye strain during extended heavy-use applications. IP68 and IP69K Dual Rating: The dual IP68 and IP69K certification confirms complete dust and waterproof protection against continuous water immersion and high-pressure, high-temperature water jet wash-down, guaranteeing performance in industrial wash-down, agricultural mud, and the harshest working environments. CISPR 25 C3 Certified: CISPR 25 C3 electromagnetic compatibility certification suppresses interference with onboard receivers including AM/FM radio, UHF radio, GPS, mobile communication, and Wi-Fi. 30G Shock and 5G Vibration Tested: Independently tested to withstand 30G shock loads and 5G sustained vibration, confirming structural and electrical integrity for heavy machinery, agricultural equipment, and demanding industrial applications. 12V and 24V Compatibility: Operates on both 12V and 24V electrical systems, making it compatible with agricultural tractors, harvesters, trucks, industrial equipment, and passenger vehicles. Premium AkzoNobel Powder Coat Finish: The housing carries a premium AkzoNobel powder coat in black, known for its adhesion, hardness, and resistance to chipping, UV degradation, and chemical exposure in outdoor and industrial applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The die-cast aluminium housing provides structural rigidity and thermal management for the six-LED array, and the polycarbonate lens provides impact resistance and optical clarity throughout the rated 50,000-hour lifespan. Stainless Steel Hardware, Bracket, and STEDI Cover Included: Stainless steel mounting hardware and bracket are included for a complete, corrosion-resistant installation, and a STEDI protective cover is supplied for storage or transport. Technical Specs Specification Detail SKU ST-04-G6-001 Brand STEDI LED 6x CREE XP-L2 LED Power Output 6 x 10W (60W total) Raw Lumens 6,000 lm Tested Lumens 4,600 lm Beam Type Flood 1 LUX Distance (Length) 74m 1 LUX Distance (Width) 52m Colour Temperature 5700K Operating Voltage 12V and 24V Amp Draw 4.8A @ 13.5V IP Rating IP68 and IP69K CISPR Rating CISPR 25 C3 Shock Tested 30G Vibration Tested 5G Housing Material Die-cast aluminium Lens Material Polycarbonate Finish Premium AkzoNobel powder coat, black Hardware Stainless steel LED Lifespan 50,000 hours Weight 1.10 kg What's in the Box 1x STEDI G6 Flood Light 1x STEDI Black Cover 1x Stainless Steel Hardware 1x Stainless Steel Bracket 1x 2-Pin Male Connector Goes Well With The ST-04-G6-001 is the high-output choice for industrial, agricultural, and heavy worksite lighting where maximum flood coverage from a single light unit is the priority. It pairs naturally with other STEDI G Series lights and light bars for comprehensive multi-zone vehicle and machinery lighting setups. For applications requiring lower output in the same flood pattern, the G4 Flood (ST-04-G4-003) and G4 Ultra Flood (ST-04-G4-004) provide 3000 tested lumens at 40W. A STEDI or compatible wiring harness with switch is recommended, and a relay rated for at least 5A is recommended for the G6's 4.8A draw. Frequently Asked Questions How does the G6 Flood compare to the G4 range in output? The G6 Flood uses six CREE XP-L2 LEDs at 60W total, producing 4600 tested lumens and covering a flood zone of 74m x 52m at 1 LUX, drawing 4.8A at 13.5V and weighing 1.10kg. The G4 range uses four CREE XP-L2 LEDs at 40W total, producing 3000 tested lumens in various beam patterns. The G6 Flood provides approximately 53% more tested output than the G4 variants and covers a substantially larger flood zone, making it the choice for industrial and agricultural environments where maximum near-field output is required. For camping and general 4WD use where the G4's output is sufficient, the lighter and lower-draw G4 range is the practical choice. What does IP69K add to IP68 protection? IP68 certifies the light is sealed against continuous water immersion at specified depth and duration. IP69K is an additional certification covering high-pressure and high-temperature water jet wash-down, encountered when hosing down agricultural machinery, industrial equipment, and commercial vehicles. The G6 Flood's dual IP68 and IP69K rating confirms it is protected against both scenarios. What does CISPR 25 C3 mean for agricultural and industrial machinery? CISPR 25 is an international standard measuring radio frequency emissions produced by vehicle and machinery components. C3 is the highest performance class within CISPR 25, confirming the G6 Flood produces minimal electromagnetic interference that could affect onboard receivers including GPS guidance systems, UHF radio, AM/FM radio, mobile communication, and Wi-Fi, which are increasingly common on modern agricultural and industrial equipment. Is the G6 Flood suitable for 24V agricultural and industrial machinery? Yes. The G6 Flood is compatible with both 12V and 24V electrical systems, making it directly compatible with agricultural tractors, harvesters, semi-trailers, and industrial equipment operating on 24V systems without requiring a voltage converter. What is the rated lifespan of the CREE XP-L2 LEDs? The six CREE XP-L2 LEDs in the G6 Flood are rated for 50,000 hours of operating life. At typical work light usage of 8 hours per day in agricultural or industrial use, this equates to over 17 years of service before the LEDs reach their rated end-of-life output level under normal use patterns.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI TOY-105-BND-QDE Upper Quad Inner Grille Bundle to Suit Toyota 250 Prado Mid-2024+ Upper inner grille lighting bundle engineered specifically for the Toyota 250 Prado Mid-2024+, combining the precision-fit STEDI upper inner grille bracket kit with two Quad EVO Centre LED driving lights and a Dual Connector Plug & Play SMART Harness for a clean, OEM-style lighting upgrade with no cutting, no drilling, and no compromise to factory collision or safety systems. Product Overview The STEDI TOY-105-BND-QDE Upper Quad Inner Grille Bundle is a purpose-built lighting upgrade solution for the Toyota 250 Series Prado Mid-2024+. The upper inner grille bracket kit is constructed from powder-coated 304 stainless steel, delivering superior corrosion resistance and durability while providing a precise, factory-style fit behind the Prado's factory grille. Designed specifically for the upper mounting position, the bracket provides a rugged mounting base for a pair of STEDI Quad EVO Centre LED driving lights without interfering with factory collision or safety sensors, keeping the OE factory warranty fully intact. The upper-only configuration positions the Quad EVO Centre lights cleanly behind the upper section of the factory grille, delivering powerful focused illumination while preserving the vehicle's clean OEM appearance. The included Dual Connector Plug & Play SMART Harness provides professional, high-beam triggered electrical integration for both lights from a single connection point. Installation is modification-free and bolt-on, using factory mounting points with no cutting or drilling required. This product features an Australian Design Application (No. 202611638), reflecting STEDI's commitment to purpose-engineered, vehicle-specific solutions. Note: This bundle is compatible with the Toyota 250 Prado Mid-2024+ in GX, GXL, and Altitude grades only. VX and Kakadu models have a different grille configuration and are not compatible. A high beam piggyback adapter is required for installation and is not included in this bundle. Confirm your vehicle's grade before ordering or contact F.A.E. if you are unsure. Features & Benefits Precision Upper Grille Fit Engineered specifically for the Toyota 250 Prado Mid-2024+ (GX, GXL, Altitude), the upper inner grille bracket delivers a clean OEM-style fitment behind the upper section of the factory grille with no visible modification to the vehicle. Bolt-On, No Drilling Installation Simple bolt-on fixing to factory mounting points requires no cutting, drilling, or body modification, keeping the installation fully reversible and the OE factory warranty intact. 304 Stainless Steel Construction The bracket is pressed from powder-coated 304 stainless steel for superior corrosion resistance and long-term durability in tough 4WD and off-road conditions. Two Quad EVO Centre LED Driving Lights Included Two STEDI Quad EVO Centre LED driving lights are included for powerful, focused illumination and outstanding long-range night-time visibility, positioned cleanly behind the upper grille. Dual Connector Plug & Play SMART Harness Included The Dual Connector Plug & Play SMART Harness provides clean, professional high-beam triggered electrical integration for both Quad EVO Centre lights from a single connection point. No Interference with Factory Safety Systems The bracket design ensures factory collision and safety sensors remain fully unaffected, preserving all ADAS and OE safety system functionality post-installation. OE Factory Warranty Preserved Modification-free, bolt-on installation ensures your Toyota factory vehicle warranty remains intact throughout and following the upgrade. Australian Design Application This product carries Australian Design Application No. 202611638, reflecting STEDI's commitment to purpose-engineered, vehicle-specific accessory design. Technical Specs Specification Detail SKU TOY-105-BND-QDE Brand STEDI Vehicle Compatibility Toyota 250 Series Prado Mid-2024+ (GX, GXL, Altitude Only) Incompatible Grades VX and Kakadu (Different Grille Configuration) Bracket Material 304 Stainless Steel Bracket Finish Black Powder Coat Mounting Position Upper Inner Grille Installation Method Bolt-On (No Cutting or Drilling) LED Driving Lights Included 2 x STEDI Quad EVO Centre LED Driving Lights Wiring Harness Included 1 x Dual Connector Plug & Play SMART Harness Additional Requirement High Beam Piggyback Adapter (Not Included) Safety System Compatibility No Interference with Factory Collision or Safety Sensors Australian Design Application No. 202611638 What's Included: 1 x Inner Grille Upper Mounting Kit with hardware (Toyota 250 Series Prado Mid-2024+) 2 x STEDI Quad EVO LED Driving Light (Centre Module) 1 x Dual Connector Plug & Play SMART Harness Compatible With / Goes Well With This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. It is not compatible with VX or Kakadu models, which feature a different grille configuration. A high beam piggyback adapter is required for installation and must be purchased separately. Contact F.A.E. to confirm the correct adapter for your vehicle. The bundle pairs well with the STEDI lower inner grille bracket kit or additional STEDI driving lights and light bars for an expanded full-grille lighting setup. Frequently Asked Questions Is this bundle compatible with all Toyota 250 Prado grades? No. This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. The VX and Kakadu models have a different grille configuration and are not compatible with this kit. Check your vehicle's build plate or contact F.A.E. to confirm your Prado's grade before ordering. Is a high beam piggyback adapter included in this bundle? No. A high beam piggyback adapter is required for installation but is not included in this bundle and must be ordered separately. Contact F.A.E. to confirm the correct adapter for your vehicle before proceeding with installation. Does installation require any cutting or drilling? No. The inner grille bracket uses simple bolt-on fixing to the factory mounting points of the Toyota 250 Prado. No cutting, drilling, or body modification is required. The installation is fully reversible and does not affect factory collision or safety sensors. Will this kit affect my factory collision or safety systems? No. The STEDI inner grille bracket is specifically designed to avoid interference with factory collision avoidance and safety sensors. Factory ADAS and safety system functionality are fully preserved, and the OE factory warranty remains intact following installation. What is the difference between this bundle and the full upper and lower bundle? This bundle the TOY-105-BND-QDE includes only the upper inner grille bracket kit and mounts two Quad EVO Centre LED driving lights behind the upper grille position. The full upper and lower bundle additionally includes a lower mounting kit, supporting a broader lighting configuration behind both the upper and lower sections of the factory grille. Contact F.A.E. for guidance on which configuration best suits your lighting requirements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI TOY-107-BND-QDE Lower Quad Inner Grille Bundle to Suit Toyota 250 Prado Mid-2024+ Lower inner grille lighting bundle engineered specifically for the Toyota 250 Prado Mid-2024+, combining the precision-fit STEDI lower inner grille bracket kit with two Quad EVO Centre LED driving lights and a Dual Connector Plug & Play SMART Harness for a clean, OEM-style lighting upgrade with no cutting, no drilling, and no compromise to factory collision or safety systems. Product Overview The STEDI TOY-107-BND-QDE Lower Quad Inner Grille Bundle is a purpose-built lighting upgrade solution for the Toyota 250 Series Prado Mid-2024+. The lower inner grille bracket kit is constructed from powder-coated 304 stainless steel, delivering superior corrosion resistance and durability while providing a precise, factory-style fit behind the Prado's factory grille. Designed specifically for the lower mounting position, the bracket provides a durable mounting base for a pair of STEDI Quad EVO Centre LED driving lights without interfering with factory collision or safety sensors, keeping the OE factory warranty fully intact. The lower-position configuration mounts the Quad EVO Centre lights cleanly behind the lower section of the factory grille, delivering powerful focused illumination with optimal beam positioning for maximum spread and brightness. The included Dual Connector Plug & Play SMART Harness provides professional, high-beam triggered electrical integration for both lights from a single connection point. Installation is modification-free and bolt-on, using factory mounting points with no cutting or drilling required. This product features an Australian Design Application (No. 202611639), reflecting STEDI's commitment to purpose-engineered, vehicle-specific solutions. Note: This bundle is compatible with the Toyota 250 Prado Mid-2024+ in GX, GXL, and Altitude grades only. VX and Kakadu models have a different grille configuration and are not compatible. A high beam piggyback adapter is required for installation and is not included in this bundle. Confirm your vehicle's grade before ordering or contact F.A.E. if you are unsure. Features & Benefits Precision Lower Grille Fit Engineered specifically for the Toyota 250 Prado Mid-2024+ (GX, GXL, Altitude), the lower inner grille bracket delivers a clean OEM-style fitment behind the lower section of the factory grille with no visible modification to the vehicle. Bolt-On, No Drilling Installation Simple bolt-on fixing to factory mounting points requires no cutting, drilling, or body modification, keeping the installation fully reversible and the OE factory warranty intact. 304 Stainless Steel Construction The bracket is pressed from powder-coated 304 stainless steel for superior corrosion resistance and long-term durability in tough 4WD and off-road conditions. Two Quad EVO Centre LED Driving Lights Included Two STEDI Quad EVO Centre LED driving lights are included for powerful, focused illumination and outstanding long-range night-time visibility, positioned cleanly behind the lower grille. Dual Connector Plug & Play SMART Harness Included The Dual Connector Plug & Play SMART Harness provides clean, professional high-beam triggered electrical integration for both Quad EVO Centre lights from a single connection point. No Interference with Factory Safety Systems The bracket design ensures factory collision and safety sensors remain fully unaffected, preserving all ADAS and OE safety system functionality post-installation. OE Factory Warranty Preserved Modification-free, bolt-on installation ensures your Toyota factory vehicle warranty remains intact throughout and following the upgrade. Australian Design Application This product carries Australian Design Application No. 202611639, reflecting STEDI's commitment to purpose-engineered, vehicle-specific accessory design. Technical Specs Specification Detail SKU TOY-107-BND-QDE Brand STEDI Vehicle Compatibility Toyota 250 Series Prado Mid-2024+ (GX, GXL, Altitude Only) Incompatible Grades VX and Kakadu (Different Grille Configuration) Bracket Material 304 Stainless Steel Bracket Finish Black Powder Coat Mounting Position Lower Inner Grille Installation Method Bolt-On (No Cutting or Drilling) LED Driving Lights Included 2 x STEDI Quad EVO Centre LED Driving Lights Wiring Harness Included 1 x Dual Connector Plug & Play SMART Harness Additional Requirement High Beam Piggyback Adapter (Not Included) Safety System Compatibility No Interference with Factory Collision or Safety Sensors Australian Design Application No. 202611639 What's Included: 1 x Inner Grille Lower Mounting Kit with hardware (Toyota 250 Series Prado Mid-2024+) 2 x STEDI Quad EVO LED Driving Light (Centre Module) 1 x Dual Connector Plug & Play SMART Harness Compatible With / Goes Well With This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. It is not compatible with VX or Kakadu models, which feature a different grille configuration. A high beam piggyback adapter is required for installation and must be purchased separately. Contact F.A.E. to confirm the correct adapter for your vehicle. The bundle pairs well with the STEDI upper inner grille bracket kit or additional STEDI driving lights and light bars for an expanded full-grille lighting setup. Frequently Asked Questions Is this bundle compatible with all Toyota 250 Prado grades? No. This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. The VX and Kakadu models have a different grille configuration and are not compatible with this kit. Check your vehicle's build plate or contact F.A.E. to confirm your Prado's grade before ordering. Is a high beam piggyback adapter included in this bundle? No. A high beam piggyback adapter is required for installation but is not included in this bundle and must be ordered separately. Contact F.A.E. to confirm the correct adapter for your vehicle before proceeding with installation. Does installation require any cutting or drilling? No. The inner grille bracket uses simple bolt-on fixing to the factory mounting points of the Toyota 250 Prado. No cutting, drilling, or body modification is required. The installation is fully reversible and does not affect factory collision or safety sensors. Will this kit affect my factory collision or safety systems? No. The STEDI inner grille bracket is specifically designed to avoid interference with factory collision avoidance and safety sensors. Factory ADAS and safety system functionality are fully preserved, and the OE factory warranty remains intact following installation. What is the difference between this bundle and the upper inner grille bundle? This bundle — the TOY-107-BND-QDE — includes only the lower inner grille bracket kit and mounts two Quad EVO Centre LED driving lights behind the lower grille position. The upper inner grille bundle (TOY-105-BND-QDE) mounts lights behind the upper grille position. Both can be used together for a full upper and lower grille lighting configuration. Contact F.A.E. for guidance on which setup best suits your requirements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI TOY-250-BND-ELB EVO Light Bar Inner Grille Bundle to Suit Toyota 250 Prado Mid-2024+ Lower inner grille lighting bundle engineered specifically for the Toyota 250 Prado Mid-2024+, combining the precision-fit STEDI lower inner grille bracket kit with the STEDI EVO Light Bar for a clean, OEM-style lighting upgrade with no cutting, no drilling, and no compromise to factory collision or safety systems. Product Overview The STEDI TOY-250-BND-ELB EVO Light Bar Inner Grille Bundle is a purpose-built lighting upgrade solution for the Toyota 250 Series Prado Mid-2024+. The lower inner grille bracket kit is constructed from powder-coated 304 stainless steel, delivering superior corrosion resistance and durability while providing a precise, factory-style fit behind the Prado's factory grille. Designed for the lower mounting position, the bracket creates a strong, stable mounting base for the included STEDI EVO Light Bar without interfering with factory collision or safety sensors, keeping the OE factory warranty fully intact. The EVO Light Bar mounts cleanly behind the lower section of the factory grille, delivering wide-spread, high-output illumination with optimal beam positioning for maximum brightness and outstanding night-time visibility. Whether used as a standalone lighting setup or paired with additional upper grille driving lights, the lower inner grille kit ensures the EVO Light Bar is precisely positioned for the best possible beam spread. Installation is modification-free and bolt-on, using factory mounting points with no cutting or drilling required. Note: This bundle is compatible with the Toyota 250 Prado Mid-2024+ in GX, GXL, and Altitude grades only. VX and Kakadu models have a different grille configuration and are not compatible. Confirm your vehicle's grade before ordering or contact F.A.E. if you are unsure. Features & Benefits Precision Lower Grille Fit Engineered specifically for the Toyota 250 Prado Mid-2024+ (GX, GXL, Altitude), the lower inner grille bracket delivers a clean OEM-style fitment behind the lower section of the factory grille with no visible modification to the vehicle. Bolt-On, No Drilling Installation Simple bolt-on fixing to factory mounting points requires no cutting, drilling, or body modification, keeping the installation fully reversible and the OE factory warranty intact. 304 Stainless Steel Construction The bracket is pressed from powder-coated 304 stainless steel for superior corrosion resistance and long-term durability in tough 4WD and off-road conditions. STEDI EVO Light Bar Included The STEDI EVO Light Bar is included in this bundle for powerful, wide-spread illumination positioned cleanly behind the lower section of the factory grille for outstanding night-time visibility. Optimal Beam Positioning The lower inner grille mounting position ensures the EVO Light Bar is precisely placed for maximum beam spread and brightness, whether used alone or in combination with upper grille driving lights. No Interference with Factory Safety Systems The bracket design ensures factory collision and safety sensors remain fully unaffected, preserving all ADAS and OE safety system functionality post-installation. OE Factory Warranty Preserved Modification-free, bolt-on installation ensures your Toyota factory vehicle warranty remains intact throughout and following the upgrade. Technical Specs Specification Detail SKU TOY-250-BND-ELB Brand STEDI Vehicle Compatibility Toyota 250 Series Prado Mid-2024+ (GX, GXL, Altitude Only) Incompatible Grades VX and Kakadu (Different Grille Configuration) Bracket Material 304 Stainless Steel Bracket Finish Black Powder Coat Mounting Position Lower Inner Grille Installation Method Bolt-On (No Cutting or Drilling) Light Bar Included 1 x STEDI EVO Light Bar Safety System Compatibility No Interference with Factory Collision or Safety Sensors What's Included: 1 x Inner Grille Lower Mounting Kit with hardware (Toyota 250 Series Prado Mid-2024+) 1 x STEDI EVO Light Bar Compatible With / Goes Well With This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. It is not compatible with VX or Kakadu models, which feature a different grille configuration. The bundle pairs well with the STEDI upper inner grille bracket kit and Quad EVO Centre LED driving lights for a full upper and lower grille lighting configuration. Contact F.A.E. for guidance on compatible STEDI driving lights and accessories that pair with this EVO Light Bar inner grille setup. Frequently Asked Questions Is this bundle compatible with all Toyota 250 Prado grades? No. This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. The VX and Kakadu models have a different grille configuration and are not compatible with this kit. Check your vehicle's build plate or contact F.A.E. to confirm your Prado's grade before ordering. Does installation require any cutting or drilling? No. The inner grille bracket uses simple bolt-on fixing to the factory mounting points of the Toyota 250 Prado. No cutting, drilling, or body modification is required. The installation is fully reversible and does not affect factory collision or safety sensors. Will this kit affect my factory collision or safety systems? No. The STEDI inner grille bracket is specifically designed to avoid interference with factory collision avoidance and safety sensors. Factory ADAS and safety system functionality are fully preserved, and the OE factory warranty remains intact following installation. Is a wiring harness included in this bundle? No. This bundle includes the lower inner grille bracket kit and the STEDI EVO Light Bar only. A suitable wiring harness must be sourced and purchased separately. Contact F.A.E. for guidance on the correct wiring harness for your vehicle and lighting setup. Can I combine this bundle with upper grille driving lights for a fuller setup? Yes. This lower inner grille bundle is designed to work alongside the STEDI upper inner grille bracket kit and Quad EVO Centre LED driving lights for a complete upper and lower grille lighting configuration. Contact F.A.E. for guidance on which upper grille bundle best complements this EVO Light Bar setup.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI TOY-250-BND-QDE Quad EVO Inner Grille Bundle to Suit Toyota 250 Prado Mid-2024+ Complete inner grille lighting bundle engineered specifically for the Toyota 250 Prado mid-2024+, combining the precision-fit STEDI inner grille bracket kit with four Quad EVO Centre LED driving lights and a 4-way DTP SMART wiring harness for a powerful, OEM-style lighting upgrade with no cutting, no drilling, and no compromise to factory collision or safety systems. Product Overview The STEDI TOY-250-BND-QDE Quad EVO Inner Grille Bundle is a purpose-built lighting upgrade solution for the Toyota 250 Series Prado mid-2024+. The inner grille bracket kit is constructed from powder-coated 304 stainless steel, delivering superior corrosion resistance and durability while providing a precise, factory-style fit behind the Prado's factory grille. Designed for both upper and lower mounting points, the bracket creates a strong, stable mounting base for the included Quad EVO Centre LED driving lights without interfering with factory collision or safety sensors, keeping the OE factory warranty intact. Included in the bundle are four STEDI Quad EVO Centre LED driving lights and a Quad Connector DTP High Beam wiring harness with four DT-P to DT reducers for streamlined, professional wiring integration. Whether used as a standalone lighting setup or combined with additional light bars, the inner grille kit ensures optimal light positioning for maximum beam spread and outstanding night-time visibility. Installation is modification-free and straightforward, using simple bolt-on fixing to factory mounting points — no cutting or drilling required. Note: This bundle is compatible with the Toyota 250 Prado mid-2024+ in GX, GXL, and Altitude grades only. The VX and Kakadu models have a different grille configuration and are not compatible with this kit. A high beam piggyback adapter is required for installation and is not included in this bundle. Confirm your vehicle's exact grade before ordering. Contact F.A.E. if you are unsure. Features and Benefits Precision Factory-Style Fit - engineered specifically for the Toyota 250 Prado mid-2024+, the inner grille bracket delivers a clean OEM-style fitment behind the factory grille with no visible modification Bolt-On, No Drilling Installation - simple bolt-on fixing to factory mounting points requires no cutting, drilling, or body modification, keeping the installation fully reversible and the OE factory warranty intact 304 Stainless Steel Construction - bracket is pressed from powder-coated 304 stainless steel for superior corrosion resistance and long-term durability in tough 4WD conditions Upper and Lower Mounting Points - inner grille kit supports both upper and lower mounting positions, providing a stable and versatile base for the Quad EVO driving lights Four Quad EVO Centre LED Driving Lights Included - bundle includes four STEDI Quad EVO Centre LED driving lights for powerful, wide-spread illumination and outstanding night-time visibility 4-Way DTP SMART Wiring Harness Included - Quad Connector DTP High Beam wiring harness and four DT-P to DT reducers are included for clean, professional electrical integration No Interference with Safety Systems - bracket design ensures factory collision and safety sensors remain unaffected, preserving all ADAS and OE safety system functionality OE Warranty Preserved - modification-free installation ensures your factory vehicle warranty remains intact throughout the upgrade Technical Specs Specification Detail SKU TOY-250-BND-QDE Brand STEDI Vehicle Compatibility Toyota 250 Series Prado Mid-2024+ (GX, GXL, Altitude Only) Incompatible Grades VX and Kakadu (Different Grille Configuration) Bracket Material 304 Stainless Steel Bracket Finish Black Powder Coat Mounting Points Upper and Lower Inner Grille Installation Method Bolt-On (No Cutting or Drilling) LED Driving Lights Included 4 x STEDI Quad EVO Centre LED Driving Lights Wiring Harness Included 1 x Quad Connector DTP High Beam Wiring Harness Reducers Included 4 x DT-P to DT Reducer Additional Requirement High Beam Piggyback Adapter (Not Included) Safety System Compatibility No Interference with Factory Collision or Safety Sensors What's Included: 1 x Inner Grille Upper Mounting Kit with hardware (Toyota 250 Series Prado Mid-2024+) 1 x Inner Grille Lower Mounting Kit with hardware (Toyota 250 Series Prado Mid-2024+) 4 x STEDI Quad EVO Centre LED Driving Lights 1 x Quad Connector DTP High Beam Wiring Harness 4 x DT-P to DT Reducer Compatible With / Goes Well With Compatible With: Toyota 250 Series Prado Mid-2024+ (GX, GXL, and Altitude Grades Only) Note: This bundle is not compatible with the Toyota 250 Prado VX or Kakadu grades, which have a different grille configuration. A high beam piggyback adapter is required for installation and must be purchased separately. Confirm your vehicle's grade before ordering. Contact F.A.E. if you are unsure. Goes well with: High Beam Piggyback Adapter (required for installation — not included, must be ordered separately) Additional STEDI light bars (for expanded lighting coverage beyond the inner grille setup) Frequently Asked Questions Q: Is this bundle compatible with all Toyota 250 Prado grades? A: No. This bundle is compatible with the Toyota 250 Series Prado mid-2024+ in GX, GXL, and Altitude grades only. The VX and Kakadu models have a different grille configuration and are not compatible with this kit. Check your vehicle's build plate or contact F.A.E. to confirm your Prado's grade before ordering. Q: Is a high beam piggyback adapter included in this bundle? A: No. A high beam piggyback adapter is required for installation but is not included in this bundle. It must be ordered separately. Contact F.A.E. to confirm the correct adapter for your vehicle before installation. Q: Does installation require any cutting or drilling? A: No. The inner grille bracket uses simple bolt-on fixing to the factory mounting points of the Toyota 250 Prado. No cutting, drilling, or body modification is required. The installation is fully reversible and does not affect the factory collision or safety sensors. Q: Will this kit affect my factory collision or safety systems? A: No. The STEDI inner grille bracket is specifically designed to avoid interference with factory collision avoidance and safety sensors. Factory ADAS and safety system functionality are fully preserved, and the OE factory warranty remains intact following installation. Q: Can I add additional light bars to this setup? A: Yes. The inner grille kit is designed to support single or multiple light bar configurations, with upper and lower mounting points providing flexible positioning for expanded lighting setups. Contact F.A.E. for guidance on compatible STEDI light bar options that pair with the Quad EVO inner grille system.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI TOY-250-BND-QEL Quad EVO & EVO Light Bar Inner Grille Bundle to Suit Toyota 250 Prado Mid-2024+ Complete inner grille lighting bundle engineered specifically for the Toyota 250 Prado Mid-2024+, combining the precision-fit STEDI inner grille bracket kit with two Quad EVO Centre LED driving lights, a 22-inch EVO Light Bar, and a Dual Connector Plug & Play SMART harness for a powerful, OEM-style lighting upgrade with no cutting, no drilling, and no compromise to factory collision or safety systems. Product Overview The STEDI TOY-250-BND-QEL Quad EVO & EVO Light Bar Inner Grille Bundle is a purpose-built lighting upgrade solution for the Toyota 250 Series Prado Mid-2024+. The inner grille bracket kit is constructed from powder-coated 304 stainless steel, delivering superior corrosion resistance and durability while providing a precise, factory-style fit behind the Prado's factory grille. Designed with both upper and lower mounting points, the bracket creates a strong, stable mounting base for the included driving lights without interfering with factory collision or safety sensors, keeping the OE factory warranty fully intact. This bundle pairs two STEDI Quad EVO Centre LED driving lights with a 22-inch EVO Light Bar for a complementary near-and-far lighting configuration, delivering exceptional beam spread and outstanding night-time visibility. The included Dual Connector Plug & Play SMART Harness provides streamlined, professional electrical integration across both light types from a single connection point. Installation is modification-free and bolt-on, using factory mounting points with no cutting or drilling required. Note: This bundle is compatible with the Toyota 250 Prado Mid-2024+ in GX, GXL, and Altitude grades only. VX and Kakadu models have a different grille configuration and are not compatible. A high beam piggyback adapter is required for installation and is not included in this bundle. Confirm your vehicle's grade before ordering or contact F.A.E. if you are unsure. Features & Benefits Precision Factory-Style Fit Engineered specifically for the Toyota 250 Prado Mid-2024+ (GX, GXL, Altitude), the inner grille bracket delivers a clean OEM-style fitment behind the factory grille with no visible modification to the vehicle. Bolt-On, No Drilling Installation Simple bolt-on fixing to factory mounting points requires no cutting, drilling, or body modification, keeping the installation fully reversible and the OE factory warranty intact. 304 Stainless Steel Construction The bracket is pressed from powder-coated 304 stainless steel for superior corrosion resistance and long-term durability in tough 4WD and off-road conditions. Upper and Lower Mounting Points The inner grille kit supports both upper and lower mounting positions, providing a stable and versatile base for the Quad EVO driving lights and EVO Light Bar. Two Quad EVO Centre LED Driving Lights Included Two STEDI Quad EVO Centre LED driving lights are included for powerful, focused illumination with outstanding long-range night-time visibility. 22-Inch EVO Light Bar Included The 22-inch EVO Light Bar provides wide-spread beam coverage to complement the Quad EVO Centre lights, delivering a powerful combination of long throw and broad illumination across the road. Dual Connector Plug & Play SMART Harness Included The Dual Connector Plug & Play SMART Harness is included for clean, professional electrical integration across both light types from a single high-beam triggered connection. No Interference with Factory Safety Systems The bracket design ensures factory collision and safety sensors remain fully unaffected, preserving all ADAS and OE safety system functionality post-installation. OE Factory Warranty Preserved Modification-free, bolt-on installation ensures your Toyota factory vehicle warranty remains intact throughout and following the upgrade. Technical Specs Specification Detail SKU TOY-250-BND-QEL Brand STEDI Vehicle Compatibility Toyota 250 Series Prado Mid-2024+ (GX, GXL, Altitude Only) Incompatible Grades VX and Kakadu (Different Grille Configuration) Bracket Material 304 Stainless Steel Bracket Finish Black Powder Coat Mounting Points Upper and Lower Inner Grille Installation Method Bolt-On (No Cutting or Drilling) LED Driving Lights Included 2 x STEDI Quad EVO Centre LED Driving Lights Light Bar Included 1 x STEDI EVO Light Bar 22 Inch Wiring Harness Included 1 x Dual Connector Plug & Play SMART Harness Additional Requirement High Beam Piggyback Adapter (Not Included) Safety System Compatibility No Interference with Factory Collision or Safety Sensors What's Included: 1 x Inner Grille Upper Mounting Kit with hardware (Toyota 250 Series Prado Mid-2024+) 1 x Inner Grille Lower Mounting Kit with hardware (Toyota 250 Series Prado Mid-2024+) 2 x STEDI Quad EVO LED Driving Light (Centre Module) 1 x STEDI EVO Light Bar 22 Inch 1 x Dual Connector Plug & Play SMART Harness Compatible With / Goes Well With This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. It is not compatible with VX or Kakadu models, which feature a different grille configuration. A high beam piggyback adapter is required for installation and must be purchased separately — contact F.A.E. to confirm the correct adapter for your vehicle. The bundle also pairs well with additional STEDI driving lights and accessories for expanded lighting coverage beyond the inner grille setup. Frequently Asked Questions Is this bundle compatible with all Toyota 250 Prado grades? No. This bundle is compatible with the Toyota 250 Series Prado Mid-2024+ in GX, GXL, and Altitude grades only. The VX and Kakadu models have a different grille configuration and are not compatible with this kit. Check your vehicle's build plate or contact F.A.E. to confirm your Prado's grade before ordering. Is a high beam piggyback adapter included in this bundle? No. A high beam piggyback adapter is required for installation but is not included in this bundle and must be ordered separately. Contact F.A.E. to confirm the correct adapter for your vehicle before proceeding with installation. Does installation require any cutting or drilling? No. The inner grille bracket uses simple bolt-on fixing to the factory mounting points of the Toyota 250 Prado. No cutting, drilling, or body modification is required. The installation is fully reversible and does not affect factory collision or safety sensors. Will this kit affect my factory collision or safety systems? No. The STEDI inner grille bracket is specifically designed to avoid interference with factory collision avoidance and safety sensors. Factory ADAS and safety system functionality are fully preserved, and the OE factory warranty remains intact following installation. What is the difference between this bundle and the TOY-250-BND-QDE? The TOY-250-BND-QDE includes four Quad EVO Centre LED driving lights and a 4-way DTP SMART harness. This bundle — the TOY-250-BND-QEL — includes two Quad EVO Centre LED driving lights paired with a 22-inch EVO Light Bar and a Dual Connector Plug & Play SMART Harness, offering a combined spot and light bar configuration for a broader spread of illumination across both long throw and wide coverage.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

9-Inch Trapezoid Head Unit Fascia Nissan Patrol GU Y61 Cab Chassis 2005–2016. Cab Chassis Only Not Compatible with Wagon. OEM-Style Finish. Fascia Panel Only. Product Overview The Stinger SF9-NI01 is a vehicle-specific 9-inch trapezoid head unit fascia designed for the Nissan Patrol GU (Y61) in cab chassis configuration, covering 2005 to 2016 production. The cab chassis and wagon body styles of the Patrol GU share the same platform but have distinct dashboard configurations the SF9-NI01 is precision-moulded for the cab chassis dashboard specifically and is not interchangeable with the wagon variant. For the Patrol GU wagon, the SF9-NI02 is the correct product. Confirmed compatible head units include Alpine INE-AW409S, INE-AX809, INE-AW409S-10, INE-AX809-10, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, and Aerpro AM9X/AM10X. The factory colour-matched finish with textured grain is confirmed; however, a specific colour name is not stated in the supplier data confirm the finish colour from the official Stinger SF9-NI01 product page before publishing. Wiring harness, antenna adaptor, and steering wheel control interface are not included and must be purchased separately. A reverse camera retention harness may also be required depending on the vehicle's factory equipment. As with all Patrol GU fascias in this range, confirm that the chassis code is Y61 the Y62 reference in the supplier documentation is believed to be a data error, as the Patrol Y62 is a completely different vehicle. Key Specifications Part number: SF9-NI01 Brand: Stinger Product type: 9-inch trapezoid head unit fascia Compatible head unit format: 9-inch trapezoid Finish: Factory colour match with textured grain (specific colour — confirm from official product page) Vehicle: Nissan Patrol GU Y61 — Cab Chassis only — 2005–2016 (confirm if extends to 1998) Not compatible with: Nissan Patrol GU Wagon (SF9-NI02) / Nissan Patrol Y62 (different vehicle — confirm) Confirmed compatible head units: Alpine INE-AW409S, INE-AX809, INE-AW409S-10, INE-AX809-10; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; Aerpro AM9X, AM10X Includes: Fascia panel only Wiring harness: Not included — sold separately Antenna adaptor: Not included — sold separately SWC interface: Not included — sold separately Camera retention harness: Not included — sold separately (confirm if required) Features & Benefits Cab Chassis Specific — Not the Wagon Fascia The Patrol GU cab chassis and wagon body styles have different dashboard configurations. The SF9-NI01 is precision-moulded for the cab chassis dashboard only. The Patrol GU wagon requires the SF9-NI02. Confirm the body style before purchasing. Y61 Series Coverage — 2005 to 2016 Covers the Nissan Patrol GU (Y61) cab chassis from 2005 to 2016. Confirm whether coverage extends to 1998 from the official product page. Not Compatible with Patrol Y62 The Patrol Y62 is an entirely different vehicle. The SF9-NI01 is for the Patrol GU (Y61) cab chassis only. 9-Inch Trapezoid — Wide Head Unit Confirmation The spec table confirms both 9-inch (Alpine INE-AW409S, INE-AX809, Aerpro AM9X) and 10-inch variant (Alpine INE-AW409S-10, INE-AX809-10, Aerpro AM10X) compatibility alongside Kenwood DMX80AXS and Pioneer DMH-AP6650BT. Confirm the supported format(s) from the official product page. Built for Demanding Patrol Applications Cab chassis Patrol GU models are commonly used in mining, agriculture, emergency services, and commercial touring — environments with elevated vibration, dust, and temperature cycling. The UV-resistant ABS construction maintains fitment and appearance across these demanding conditions. Technical Specs Specification Detail Brand Stinger Part Number SF9-NI01 Product Type 9-Inch Trapezoid Head Unit Fascia Compatible Format 9-Inch Trapezoid Finish Factory Colour Match, Textured Grain (specific colour — confirm) Vehicle Nissan Patrol GU Y61 — Cab Chassis — 2005–2016 Not Compatible Patrol GU Wagon (SF9-NI02) / Patrol Y62 (confirm) Confirmed Head Units Alpine INE-AW409S, INE-AX809, INE-AW409S-10, INE-AX809-10; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; Aerpro AM9X, AM10X Includes Fascia Panel Only Wiring Harness Not included Antenna Adaptor Not included SWC Interface Not included Camera Retention Harness Not included Compatible With / Goes Well With Vehicle compatibility: Make Model Body Style Year Range Chassis Nissan Patrol GU Cab Chassis Only 2005–2016 Y61 (confirm if extends to 1998) Not compatible with: Nissan Patrol GU Wagon (requires SF9-NI02) Nissan Patrol Y62 (different vehicle — confirm before publishing) Confirmed compatible 9-inch trapezoid head units: Alpine INE-AW409S / INE-AX809 (9-inch) Alpine INE-AW409S-10 / INE-AX809-10 (10-inch — confirm format support) Kenwood DMX80AXS Pioneer DMH-AP6650BT Aerpro AM9X (9-inch) / AM10X (10-inch — confirm format support) Recommended accessories (sold separately): Nissan Patrol GU-specific wiring harness (Nissan-to-ISO) Antenna adaptor for Nissan Steering wheel control interface (if equipped) Camera retention harness (if equipped with reverse camera) Frequently Asked Questions What is the difference between the SF9-NI01 and SF9-NI02? Both cover the Nissan Patrol GU (Y61), but for different body styles. The SF9-NI01 is for the cab chassis configuration only. The SF9-NI02 is for the wagon. The two body styles have different dashboard configurations and require separate fascia solutions. Confirm the body style of the vehicle before purchasing. Is the SF9-NI01 compatible with Patrol wagon models? No — the SF9-NI01 is precision-moulded for the Patrol GU cab chassis dashboard only. The wagon variant requires the SF9-NI02. Does the SF9-NI01 include wiring harnesses or installation accessories? No — the SF9-NI01 is a fascia panel only. A Patrol GU-specific wiring harness, antenna adaptor, and steering wheel control interface are all required separately. Confirm whether a camera retention harness is also needed based on the vehicle's factory equipment. Which 9-inch head units are confirmed compatible with the SF9-NI01? Confirmed compatible head units include Alpine INE-AW409S, INE-AX809, INE-AW409S-10, INE-AX809-10; Kenwood DMX80AXS; Pioneer DMH-AP6650BT; and Aerpro AM9X and AM10X. Both 9-inch and 10-inch Alpine/Aerpro variants are listed — confirm the supported format from the official product page. Is professional installation recommended? Yes — dashboard disassembly, correct wiring harness connections, and steering wheel control programming require experience with Nissan electrical systems. Professional installation by a qualified car audio installer is recommended to ensure a rattle-free, reliable result in the demanding conditions Patrol cab chassis vehicles encounter. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Stinger 40-EU20 Female Motorola to Female Fakra Antenna Adaptor An antenna adaptor cable with a female Motorola connector on one end and a female European-style Fakra connector on the other, the Stinger 40-EU20 allows the vehicle's factory radio to be used with an aftermarket antenna when replacing the factory antenna. Product Overview The Stinger 40-EU20 is an antenna adaptor cable designed to adapt a vehicle's factory radio connection for use with an aftermarket antenna. It features a female Motorola connector on one end and a female European-style Fakra connector on the other, providing the correct interface between the factory radio antenna input and an aftermarket antenna with a European Fakra connector. Confirm compatibility with your specific vehicle and antenna configuration before purchase. Features & Benefits Female Motorola to Female Fakra Antenna Connection: The 40-EU20 provides a female Motorola connector on one end and a female European-style Fakra connector on the other, bridging the connection between a factory radio with a Motorola-style antenna input and an aftermarket antenna with a Fakra connector. Allows Factory Radio Use with Aftermarket Antenna: The 40-EU20 is designed for installations where the factory antenna is being replaced with an aftermarket antenna, allowing the factory radio to continue operating with the new antenna via the correct connector interface. Simple Plug-and-Play Connection: The 40-EU20 is a straightforward cable adaptor requiring no modification to the factory radio or vehicle wiring, connecting directly between the factory radio antenna input and the aftermarket antenna cable. Technical Specs Specification Detail SKU 40-EU20 Brand Stinger Connector End 1 Female Motorola Connector End 2 Female European-Style Fakra Application Factory radio to aftermarket antenna Compatible With The 40-EU20 is designed for vehicles with a factory radio using a Motorola-style antenna input, where an aftermarket antenna with a female European-style Fakra connection is being installed. Confirm your specific vehicle and antenna connection type before purchase. Frequently Asked Questions What connectors does the 40-EU20 have? The 40-EU20 has a female Motorola connector on one end and a female European-style Fakra connector on the other. When is the 40-EU20 required? The 40-EU20 is required when replacing the factory antenna with an aftermarket antenna that uses a female Fakra connection, where the factory radio has a Motorola-style antenna input. It adapts the factory radio to connect correctly with the new antenna. Does the 40-EU20 work with aftermarket head units? The 40-EU20 is designed to adapt the factory radio to an aftermarket antenna. For aftermarket head unit antenna connections, a different adaptor may be required depending on the head unit's antenna input type. Confirm the antenna input type of your specific head unit before purchase. Is the 40-EU20 compatible with all vehicle makes and models? The 40-EU20 is compatible with any vehicle where the factory radio has a Motorola-style antenna input and the replacement antenna uses a female European-style Fakra connector. Confirm your specific vehicle and antenna connection types before purchase. Does the 40-EU20 require any tools or modifications for installation? No. The 40-EU20 is a plug-and-play adaptor cable that connects directly between the factory radio antenna input and the aftermarket antenna cable without tools or modification to the vehicle wiring.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less