UNIDEN MMI-01 - Glossy Mirror Mount with Cable Slot
Professional glossy mirror mount bracket designed for UHF antenna installations featuring integrated cable slot for clean wire routing, polished stainless steel construction for corrosion resistance and premium appearance, 2.5mm thickness providing robust structural strength, includes complete hardware kit with bolts, nuts, and washers for secure installation, enables antenna mounting on mirror brackets for optimal positioning, ideal for 4WD vehicles, trucks, commercial fleets, and utility vehicles requiring professional antenna mounting solution with clean cable management and durable weather-resistant stainless steel finish.
Product Overview
The UNIDEN MMI-01 is a professional-grade glossy mirror mount bracket engineered for UHF antenna installations on vehicle mirror mounting locations, providing optimal antenna positioning with clean integrated cable management. The polished stainless steel construction delivers corrosion resistance essential for Australian outdoor conditions while maintaining premium glossy appearance matching modern vehicle aesthetics. The integrated cable slot enables clean professional wire routing from antenna through mount eliminating exposed cables for OEM-quality finish. At 2.5mm thickness, the mount provides robust structural strength supporting antenna weight and wind load without flexing or vibration. Complete hardware kit includes all necessary bolts, nuts, and washers for secure installation. Ideal for 4WD vehicles, commercial trucks, fleet vehicles, and utility applications where mirror bracket mounting provides optimal antenna height and positioning while maintaining clean professional appearance.
Important Notes:
Antenna NOT Included: This is a mounting bracket only. UHF antenna must be purchased separately. Verify antenna compatibility with mirror mount applications before purchase.
Vehicle Compatibility: Suitable for vehicles with mirror bracket mounting configurations. Not all vehicles have compatible mirror mounting points - verify your vehicle's mirror mounting system accepts aftermarket brackets before purchase.
Professional Installation Recommended: While DIY installation is possible, professional installation ensures proper fitment, secure mounting, correct cable routing, and maintains vehicle warranty compliance.
Key Features
Integrated Cable Slot - Built-in cable routing channel enables clean professional wire routing from antenna through mount bracket eliminating exposed cables for OEM-quality appearance and protecting cables from weather and damage.
Polished Stainless Steel Construction - Premium stainless steel material provides excellent corrosion resistance against Australian weather conditions including coastal salt spray, rain, UV exposure, and harsh environments.
Glossy Premium Finish - High-quality polished glossy surface matches modern vehicle aesthetics maintaining premium appearance that complements contemporary 4WD and commercial vehicle styling.
2.5mm Thickness - Robust 2.5mm structural thickness provides strength and rigidity supporting antenna weight and wind loads without flexing, vibration, or structural failure during highway driving.
Complete Hardware Kit Included - Includes all necessary bolts, nuts, and washers for secure installation eliminating need to source additional hardware or fasteners.
Mirror Bracket Mounting - Designed for installation on vehicle mirror brackets providing optimal antenna positioning at elevated height for improved transmission and reception performance.
Corrosion Resistant - Stainless steel construction resists rust, corrosion, and degradation from weather exposure ensuring long service life in demanding outdoor environments.
Professional Appearance - Clean integrated design with cable management creates professional OEM-quality installation matching factory-installed equipment standards.
Optimal Antenna Positioning - Mirror bracket location provides elevated antenna mounting improving UHF signal performance compared to lower mounting positions.
Durable Construction - Heavy-duty 2.5mm stainless steel withstands vibration, impact, temperature extremes, and demanding vehicle environments for reliable long-term service.
Clean Cable Management - Integrated slot protects antenna cable from weather, abrasion, UV damage, and maintains organized professional appearance.
Weather Resistant - Stainless steel construction and design withstand rain, dust, mud, snow, and harsh Australian conditions without deterioration.
Ideal for 4WD Vehicles - Perfect for 4WD touring vehicles, off-road trucks, and adventure vehicles requiring robust antenna mounting with clean appearance.
Commercial Fleet Applications - Suitable for commercial trucks, utility vehicles, delivery fleets, and professional applications requiring durable reliable antenna mounting.
Easy Installation - Straightforward bolt-on installation with included hardware simplifies mounting process for installers and DIY enthusiasts.
Technical Specifications
Specification
Details
Brand
UNIDEN
Model
MMI-01
Product Type
Mirror Mount Antenna Bracket
Material
Polished Stainless Steel
Finish
Glossy Premium Polished
Thickness
2.5mm
Cable Management
Integrated Cable Slot
Corrosion Resistance
Excellent - Stainless Steel Construction
Mounting Location
Vehicle Mirror Bracket
Hardware Included
Yes - Bolts, Nuts, and Washers
Installation Type
Bolt-On Mounting
Antenna Compatibility
UHF Antennas Designed for Mirror Mounting
Load Capacity
Supports Standard UHF Antenna Weight and Wind Load
Weather Resistance
Yes - Stainless Steel Construction
UV Resistance
Yes - Metal Construction
Temperature Range
Standard Automotive Operating Range
Applications
4WD Vehicles, Trucks, Commercial Fleets, Utility Vehicles
Appearance
Professional OEM-Quality Finish
Structural Strength
Robust 2.5mm Thickness
Cable Protection
Yes - Integrated Slot Protects Cables
Installation
Professional Installation Recommended
Warranty
Standard Manufacturer Warranty
Weight
Lightweight Stainless Steel Construction
Colour
Polished Stainless Steel (Metallic Silver)
Design
Professional Antenna Mount with Cable Management
Frequently Asked Questions
Q: Does this mirror mount include the antenna or do I need to purchase it separately?
A: The MMI-01 is a mounting bracket ONLY - the UHF antenna is NOT included and must be purchased separately. This mount is designed to hold antennas compatible with mirror mounting applications. When purchasing antenna separately, verify it's designed for mirror mount installations and check base compatibility with the MMI-01 bracket. We can recommend suitable antennas if needed - contact us for antenna recommendations compatible with your specific vehicle and requirements.
Q: Will this fit my vehicle's mirror brackets?
A: The MMI-01 is designed for vehicles with mirror bracket mounting configurations, but not all vehicles have compatible mounting points. Common compatible vehicles include many 4WD trucks, commercial vehicles, and utility vehicles with external mirror brackets. However, modern vehicles with integrated aerodynamic mirrors or specific mounting systems may not be compatible. We strongly recommend verifying your vehicle's mirror mounting configuration before purchase. Professional installers can assess compatibility during consultation, or contact us with your vehicle make/model/year for fitment advice.
Q: How does the integrated cable slot work and what are the benefits?
A: The integrated cable slot is a channel built into the mount bracket that routes the antenna coaxial cable from antenna connection point through the mount bracket toward vehicle interior. This provides several benefits: (1) protects cable from weather exposure, UV damage, and abrasion; (2) creates clean professional appearance by concealing cables rather than exposed routing; (3) prevents cable from flapping in wind or getting caught; (4) simplifies installation with designated cable path; (5) maintains OEM-quality finish. The slot guides cable routing for organized professional installation matching factory equipment standards.
Q: Is the 2.5mm thickness strong enough for highway driving and off-road use?
A: Yes! The 2.5mm stainless steel thickness provides robust structural strength more than adequate for highway driving, off-road use, and demanding vehicle environments. This thickness prevents flexing under antenna weight and wind loads during high-speed highway driving, withstands vibration and impacts from off-road terrain, and maintains secure mounting without fatigue or failure. Stainless steel's strength-to-weight ratio combined with 2.5mm thickness creates durable mount that won't bend, flex, or fail under normal and even extreme operating conditions including corrugated roads, highway speeds, and harsh off-road environments.
Q: Can I install this myself or do I need professional installation?
A: Experienced DIY installers with proper tools can install the MMI-01, as installation involves bolting mount to mirror bracket using included hardware. However, professional installation is recommended for several reasons: (1) ensuring proper mirror bracket compatibility and fit; (2) correct torque specifications preventing over-tightening or under-tightening; (3) proper cable routing through slot and into vehicle interior; (4) maintaining vehicle warranty compliance for commercial vehicles; (5) ensuring secure installation that won't loosen with vibration. Professional installers have experience with various vehicle mirror configurations and can ensure optimal results preventing installation issues.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
UNIDEN MBU-03 - 50mm Bull Bar Mount Stainless Steel Glossy with Cable Slot
Professional 50mm bull bar mounting bracket featuring high-strength polished stainless steel construction, integrated cable slot for secure cable connection and protection, 3.0mm thickness providing exceptional durability and structural strength, includes quality stainless steel bolts and nuts for easy installation, glossy polished finish matching vehicle and accessory aesthetics, prevents cable damage with organized wire routing, corrosion-resistant design for harsh Australian conditions, ideal for mounting UHF antennas, lights, and accessories on 50mm bull bars, suitable for 4WD vehicles, trucks, off-road vehicles, and commercial applications requiring durable reliable bull bar mounting solution.
Product Overview
The UNIDEN MBU-03 is a professional 50mm bull bar mounting bracket crafted from high-strength polished stainless steel, providing durable reliable mounting solution for UHF antennas, lights, and accessories on 50mm diameter bull bars. The glossy polished finish features satin and gloss elements designed to match any combination of vehicle and accessories, enhancing exterior aesthetics with premium appearance. At 3.0mm thickness, the stainless steel construction delivers exceptional structural strength supporting mounted equipment without flexing during off-road terrain and highway driving. The integrated cable slot keeps connections secure and protects cables from damage, preventing wear from vibration, weather exposure, and vehicle operation. Complete hardware kit includes quality stainless steel bolts and nuts ensuring corrosion-resistant installation withstanding harsh Australian conditions. Ideal for 4WD enthusiasts, commercial vehicles, off-road trucks, and professional applications requiring secure bull bar mounting with cable protection for antenna installations, auxiliary lighting, or equipment mounting.
Important Notes:
50mm Bull Bar Compatibility: Designed for 50mm diameter bull bars. Verify your bull bar diameter before purchase as different diameter bull bars require different mounting brackets. Not suitable for smaller or larger diameter bull bars.
Equipment NOT Included: This is a mounting bracket only. Antennas, lights, or equipment are NOT included and must be purchased separately.
Bull Bar Required: This bracket mounts TO existing bull bars. If your vehicle doesn't have bull bar installed, bull bar must be purchased and installed separately before using this mounting bracket.
Key Features
50mm Bull Bar Design - Specifically engineered for 50mm diameter bull bars providing secure reliable mounting for antennas, lights, and accessories on standard 50mm bull bar tubing.
High-Strength Stainless Steel Construction - Premium high-strength steel material provides exceptional durability withstanding demanding off-road use, vibration, impact, and harsh environmental conditions.
Glossy Polished Finish - Professional polished finish with satin and gloss elements matches any combination of vehicle and accessories for coordinated premium exterior appearance.
Integrated Cable Slot - Built-in cable routing channel keeps connections secure and protects cables from damage, preventing wear from vibration, weather, and vehicle operation.
3.0mm Thickness for Exceptional Strength - Robust 3.0mm structural thickness provides superior strength supporting antenna weight, wind loads, and equipment without flexing or structural failure.
Quality Stainless Steel Bolts and Nuts Included - Complete hardware kit with quality stainless steel fasteners ensures corrosion-resistant secure installation for easy mounting.
Prevents Cable Damage - Organized cable routing through slot protects cables from damage, tangling, weather exposure, and wear extending cable service life.
Secure Cable Connection - Integrated slot keeps cable connections secure preventing loosening from vibration or movement during off-road driving and highway travel.
Corrosion Resistant - Stainless steel construction resists rust, corrosion, and degradation from harsh Australian conditions including coastal salt spray, rain, mud, and UV exposure.
Easy Installation - Complete hardware kit with stainless steel bolts and nuts simplifies installation process enabling straightforward DIY or professional mounting.
Matches Vehicle Aesthetics - Polished finish designed to complement various vehicle colours and accessory finishes maintaining coordinated professional exterior appearance.
Suitable for Multiple Applications - Ideal for mounting UHF antennas, LED light bars, work lights, spotlights, communication equipment, and various accessories requiring bull bar mounting.
Durable for Harsh Conditions - Heavy-duty construction withstands vibration, impact, temperature extremes, off-road terrain, and demanding vehicle environments.
Ideal for 4WD Vehicles - Perfect for 4WD touring vehicles, off-road trucks, and adventure vehicles requiring robust antenna or accessory mounting on bull bars.
Professional OEM-Quality Appearance - Premium polished finish creates professional appearance matching modern vehicle styling and quality aftermarket accessories.
Technical Specifications
Specification
Details
Brand
UNIDEN
Model
MBU-03 (UBCM-03)
Product Type
Bull Bar Mounting Bracket
Bull Bar Diameter
50mm
Material
High-Strength Polished Stainless Steel
Finish
Glossy Polished with Satin and Gloss Elements
Thickness
3.0mm
Cable Management
Integrated Cable Slot
Cable Protection
Yes - Prevents Cable Damage
Hardware Included
Yes - Quality Stainless Steel Bolts and Nuts
Corrosion Resistance
Excellent - Stainless Steel Construction
Mounting Location
50mm Diameter Bull Bars
Equipment Compatibility
UHF Antennas, Lights, Accessories, Equipment
Load Capacity
Supports Standard Antenna and Equipment Weight
Weather Resistance
Yes - Stainless Steel Construction
UV Resistance
Yes - Metal Construction
Installation Type
Bolt-On to Bull Bar
Installation
Easy DIY-Friendly with Included Hardware
Temperature Range
Standard Automotive Operating Range
Applications
4WD Vehicles, Trucks, Off-Road Vehicles, Commercial Applications
Appearance
Professional Premium Polished Design
Structural Strength
Exceptional High-Strength 3.0mm Thickness
Secure Connections
Yes - Cable Slot Keeps Connections Secure
Warranty
Standard Manufacturer Warranty
Weight
Lightweight Stainless Steel Construction
Colour
Polished Stainless Steel (Metallic Silver)
Design Purpose
Secure Bull Bar Equipment Mounting with Cable Protection
Frequently Asked Questions
Q: What's the difference between the MBU-03 and MBU-03BK models?
A: Both MBU-03 and MBU-03BK are 50mm bull bar mounts with 3.0mm stainless steel thickness and integrated cable slots. The primary differences may be finish details, specific design elements, or manufacturing variations. Both provide the same core functionality: secure 50mm bull bar mounting, cable slot protection, 3.0mm thickness strength, and stainless steel corrosion resistance. Either model serves the same purpose for mounting antennas, lights, and accessories on 50mm bull bars. If you have specific finish preference or vehicle colour matching concerns, contact us for detailed comparison.
Q: Will this bracket fit my bull bar if it's 52mm or 60mm diameter?
A: No, the MBU-03 is specifically designed for 50mm diameter bull bars. If your bull bar is different diameter (such as 52mm, 60mm, 76mm, or other sizes), this bracket will not fit properly and should not be used. Even 2mm difference (50mm vs 52mm) creates improper fit preventing secure mounting. Measure your bull bar tube diameter accurately with calipers or ruler before purchasing. Contact us with your bull bar specifications if you need help identifying correct mounting bracket for different diameter bull bars.
Q: How does the cable slot protect cables from damage?
A: The integrated cable slot provides protected routing path for cables (coaxial cable for antennas, power cables for lights) preventing multiple damage sources: (1) vibration wear from cables rubbing against bull bar or vehicle components; (2) weather exposure reducing UV, moisture, and temperature damage; (3) physical damage from cables getting caught on obstacles during off-road driving; (4) wind flapping causing cable fatigue and connector loosening; (5) tangling with other bull bar accessories. The slot channels cables through protected path maintaining secure connections and extending cable service life significantly compared to exposed cable routing.
Q: Can I mount LED light bars or only antennas with this bracket?
A: The MBU-03 can mount various equipment beyond just antennas, including: LED light bars (small to medium sizes within weight capacity), auxiliary work lights and spotlights, UHF/VHF antennas (most common application), small communication equipment, bull bar-mounted accessories with compatible mounting bases. The 3.0mm thickness supports typical antenna and light weight. However, verify your specific equipment: weight is within bracket capacity, mounting base is compatible with bracket design, and equipment dimensions suit bull bar positioning. For very heavy LED light bars or specialized equipment, confirm compatibility before purchase.
Q: Does the polished finish match all vehicle colours or just certain ones?
A: The polished stainless steel finish (metallic silver colour) is universally complementary across all vehicle colours - it's not colour-matched to specific paint. The glossy polished appearance with satin and gloss elements coordinates professionally with: white vehicles (matches chrome and stainless accessories), black vehicles (silver accent provides contrast), coloured vehicles (neutral metallic complements any colour), existing stainless bull bars and accessories (matches factory bull bar finish). Polished stainless is industry-standard for bull bar accessories specifically because it complements any vehicle regardless of colour, similar to chrome or polished aluminum accessories.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
UNIDEN MBM25 - Antenna Double Square Mount with Ratchet Fold-Down
Professional antenna mounting solution featuring ratchet fold-down mechanism for adjustable positioning, double hinge design providing flexible angle adjustment, square base for secure stable mounting, pre-fitted with 5 metres coaxial cable eliminating separate cable purchase, includes FME plug connector and PL259 adaptor for universal antenna compatibility, rain cap protecting connections from moisture and contamination, complete ready-to-install package for UHF antennas, ideal for vehicles, 4WD applications, boats, caravans, and mobile installations requiring versatile antenna mounting with weather protection and included connectivity hardware.
Product Overview
The UNIDEN MBM25 Antenna Double Square Mount is a professional complete antenna mounting solution engineered for firmly affixing UHF antennas with maximum versatility and weather protection. The innovative ratchet fold-down mechanism with double hinge design enables precise antenna positioning and angle adjustment, while fold-down capability allows antenna lowering for garage clearance, car washes, or low-clearance situations. The square base provides secure stable mounting platform on various surfaces including roof racks, bull bars, or mounting brackets. Pre-fitted with 5 metres high-quality coaxial cable eliminates need for separate cable purchase and simplifies installation, while included FME plug connector and PL259 adaptor ensure universal compatibility with different antenna and radio connector types. The rain cap keeps connections clean, protected, and dry preventing moisture ingress and signal degradation. Complete ready-to-install package ideal for 4WD vehicles, commercial trucks, boats, caravans, and mobile applications requiring professional antenna mounting with weather protection.
Important Notes:
Antenna NOT Included: This is an antenna mount with cable and connectors. UHF antenna must be purchased separately. Compatible with standard UHF antennas with appropriate thread fittings.
Mounting Surface Required: Square base requires suitable mounting surface (roof rack, bull bar, bracket) with appropriate fasteners. Mounting hardware to vehicle not included - specific to mounting location.
5m Cable Length: Pre-fitted with 5 metres coaxial cable. Verify this length is sufficient for your installation routing from antenna to radio location. Cable cannot be easily lengthened or shortened.
Key Features
Ratchet Fold-Down Mechanism - Innovative ratchet system enables controlled fold-down positioning allowing antenna lowering for garage entry, car washes, low-clearance areas, or storage without removing antenna.
Double Hinge Design - Dual hinge configuration provides flexible angle adjustment and positioning capability enabling optimal antenna orientation for best signal performance.
Square Base Platform - Stable square mounting base provides secure foundation on various mounting surfaces including roof racks, bull bars, brackets, ensuring vibration-resistant installation.
Pre-Fitted with 5m Coaxial Cable - High-quality coaxial cable pre-installed eliminates separate cable purchase, reduces installation complexity, and ensures proper cable specifications for UHF applications.
Includes FME Plug Connector - FME connector included provides compatibility with radios and equipment using FME connection standard enabling universal installation flexibility.
Includes PL259 Adaptor - PL259 adaptor included ensures compatibility with antennas and equipment using PL259/SO239 connection standard covering most common UHF antenna fittings.
Rain Cap Protection - Weather-resistant rain cap keeps connections clean, protected, and dry preventing moisture ingress, corrosion, and signal degradation from water contamination.
Complete Ready-to-Install Package - Everything included for installation: mount, cable, connectors, adaptors, rain cap - no additional components needed except antenna and mounting hardware.
Easy Antenna Mounting - Simplified installation process with pre-fitted cable and included connectors reduces installation time and complexity compared to assembling separate components.
Versatile Positioning - Ratchet and double hinge system allows precise antenna angle adjustment optimizing signal performance for specific installation locations and vehicle configurations.
Firmly Affixes Antenna - Secure mounting design holds antenna firmly in position withstanding highway speeds, vibration, and wind loads without loosening or movement.
Weather Protected Connections - Rain cap and quality connectors protect against moisture, dust, and contamination maintaining reliable signal quality in harsh outdoor conditions.
Ideal for Multiple Applications - Suitable for 4WD vehicles, commercial trucks, boats, caravans, motorhomes, and mobile installations requiring professional antenna mounting.
Universal Antenna Compatibility - Included connectors and adaptors accommodate various antenna types and connection standards simplifying antenna selection and installation.
Prevents Connection Contamination - Rain cap keeps connections clean preventing dirt, moisture, and corrosion that degrade signal quality and create intermittent connection issues.
Technical Specifications
Specification
Details
Brand
UNIDEN
Model
MBM25
Product Type
Antenna Mount with Cable and Connectors
Mounting Design
Ratchet Fold-Down with Double Hinge
Base Type
Square Base Platform
Cable Included
Yes - Pre-Fitted 5 Metres Coaxial Cable
Cable Length
5 Metres (Pre-Installed)
Cable Type
Coaxial Cable for UHF Applications
FME Connector
Yes - FME Plug Connector Included
PL259 Adaptor
Yes - PL259 Adaptor Included
Rain Cap
Yes - Weather Protection for Connections
Fold-Down Capability
Yes - Ratchet Controlled
Hinge Design
Double Hinge for Angle Adjustment
Antenna Compatibility
Standard UHF Antennas with Compatible Thread
Mounting Surfaces
Roof Racks, Bull Bars, Brackets, Flat Surfaces
Weather Protection
Yes - Rain Cap Protects Connections
Installation Type
Bolt-On to Mounting Surface
Mounting Hardware
Not Included - Specific to Mounting Location
Applications
4WD Vehicles, Trucks, Boats, Caravans, Mobile Installations
Connector Types
FME and PL259 Compatibility
Complete Package
Yes - Mount, Cable, Connectors, Rain Cap
Adjustability
Ratchet Positioning and Double Hinge Angle Adjustment
Operating Environment
Outdoor Automotive/Marine Use
Warranty
Standard Manufacturer Warranty
Weight
Standard Antenna Mount Weight
Colour
Black
Design Purpose
Versatile Professional Antenna Mounting with Weather Protection
Frequently Asked Questions
Q: Does the MBM25 include the UHF antenna or do I need to purchase it separately?
A: The MBM25 is an antenna mount with cable and connectors - the UHF antenna is NOT included and must be purchased separately. This mount is designed to work with standard UHF antennas featuring compatible thread fittings (most common UHF antennas). When purchasing antenna separately, verify thread compatibility and mounting requirements. The included PL259 adaptor accommodates most common UHF antenna base fittings. We can recommend compatible antennas if needed - contact us for antenna recommendations matching your vehicle and application.
Q: Can I use the 5m pre-fitted cable or do I need to replace it with longer cable?
A: The 5 metres coaxial cable is permanently pre-fitted to the mount and cannot be easily replaced or extended without cutting and re-terminating connections (not recommended as it affects warranty and signal quality). Before purchasing, measure routing distance from intended antenna mounting location to radio location ensuring 5m is sufficient. Typical routing (roof mount to interior radio) usually requires 4-6m. If your installation requires longer cable, consider alternative mounting locations closer to radio or different mount with longer cable option.
Q: What's the advantage of the ratchet fold-down feature?
A: The ratchet fold-down mechanism provides significant practical benefits: (1) lower antenna for garage entry without removing antenna entirely; (2) fold down for automatic car washes preventing antenna damage; (3) reduce height for low-clearance obstacles (parking structures, drive-throughs); (4) storage position when vehicle parked reducing vandalism risk or wind resistance; (5) controlled positioning with ratchet prevents free-swinging or uncontrolled movement. The double hinge allows folding backward or forward depending on installation. This feature particularly valuable for daily drivers entering garages regularly compared to permanent fixed mounts.
Q: What are FME and PL259 connectors and why are both included?
A: These are different connector standards used in radio and antenna connections. FME (For Mobile Equipment) is a screw-on connector commonly used on modern UHF radios and marine radios - the FME plug connects to radio end of cable. PL259 (also called UHF connector) is a larger threaded connector commonly used on antenna bases and some older radios - the PL259 adaptor allows antenna connection. Including both ensures universal compatibility: FME for radio connection, PL259 adaptor for antenna connection. This eliminates need to source separate adaptors matching your specific radio and antenna combination.
Q: Where should I mount the MBM25 on my vehicle?
A: Common mounting locations include: (1) Roof rack crossbars - popular for 4WD vehicles, provides optimal antenna height and 360° signal; (2) Bull bar - convenient mounting using bull bar brackets, good height and accessibility; (3) Tray/canopy - for utes/trucks with rear tray, mounts securely to canopy or tray rails; (4) Rear bumper bar - alternative location for vehicles without roof racks. Choose location considering: cable length reaches radio (5m limit), minimal obstructions for signal, secure mounting surface available, fold-down mechanism operates freely, and personal access for maintenance. Professional installers can assess optimal location for your specific vehicle.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
UNIDEN MBM20 - Antenna Single Square Mount with Ratchet Fold-Down
Professional antenna mounting solution featuring ratchet fold-down mechanism for adjustable positioning, single hinge design providing straightforward angle adjustment, square base for secure stable mounting, pre-fitted with 5 metres coaxial cable eliminating separate cable purchase, includes FME plug connector and PL259 adaptor for universal antenna compatibility, rain cap protecting connections from moisture and contamination, complete ready-to-install package for UHF antennas, ideal for vehicles, 4WD applications, boats, caravans, and mobile installations requiring reliable antenna mounting with weather protection and included connectivity hardware.
Product Overview
The UNIDEN MBM20 Antenna Single Square Mount is a professional complete antenna mounting solution engineered for firmly affixing UHF antennas with reliable positioning and weather protection. The ratchet fold-down mechanism with single hinge design enables antenna positioning and fold-down capability allowing antenna lowering for garage clearance, car washes, or low-clearance situations. The square base provides secure stable mounting platform on various surfaces including roof racks, bull bars, or mounting brackets. Pre-fitted with 5 metres high-quality coaxial cable eliminates need for separate cable purchase and simplifies installation, while included FME plug connector and PL259 adaptor ensure universal compatibility with different antenna and radio connector types. The rain cap keeps connections clean, protected, and dry preventing moisture ingress and signal degradation. Complete ready-to-install package ideal for 4WD vehicles, commercial trucks, boats, caravans, and mobile applications requiring straightforward antenna mounting with weather protection at economical price point.
Important Notes:
Antenna NOT Included: This is an antenna mount with cable and connectors. UHF antenna must be purchased separately. Compatible with standard UHF antennas with appropriate thread fittings.
Single Hinge vs Double Hinge: MBM20 features single hinge design compared to MBM25's double hinge. Single hinge provides simpler operation and lower cost while maintaining ratchet fold-down capability and reliable mounting.
5m Cable Length: Pre-fitted with 5 metres coaxial cable. Verify this length is sufficient for your installation routing from antenna to radio location. Cable cannot be easily lengthened or shortened.
Key Features
Ratchet Fold-Down Mechanism - Innovative ratchet system enables controlled fold-down positioning allowing antenna lowering for garage entry, car washes, low-clearance areas, or storage without removing antenna.
Single Hinge Design - Straightforward single hinge configuration provides reliable angle adjustment and positioning with simpler operation compared to complex multi-hinge systems.
Square Base Platform - Stable square mounting base provides secure foundation on various mounting surfaces including roof racks, bull bars, brackets, ensuring vibration-resistant installation.
Pre-Fitted with 5m Coaxial Cable - High-quality coaxial cable pre-installed eliminates separate cable purchase, reduces installation complexity, and ensures proper cable specifications for UHF applications.
Includes FME Plug Connector - FME connector included provides compatibility with radios and equipment using FME connection standard enabling universal installation flexibility.
Includes PL259 Adaptor - PL259 adaptor included ensures compatibility with antennas and equipment using PL259/SO239 connection standard covering most common UHF antenna fittings.
Rain Cap Protection - Weather-resistant rain cap keeps connections clean, protected, and dry preventing moisture ingress, corrosion, and signal degradation from water contamination.
Complete Ready-to-Install Package - Everything included for installation: mount, cable, connectors, adaptors, rain cap - no additional components needed except antenna and mounting hardware.
Easy Antenna Mounting - Simplified installation process with pre-fitted cable and included connectors reduces installation time and complexity compared to assembling separate components.
Reliable Positioning - Ratchet and single hinge system allows antenna angle adjustment with dependable holding position withstanding highway speeds and vibration.
Firmly Affixes Antenna - Secure mounting design holds antenna firmly in position without loosening or movement during vehicle operation and wind loads.
Weather Protected Connections - Rain cap and quality connectors protect against moisture, dust, and contamination maintaining reliable signal quality in harsh outdoor conditions.
Economical Solution - Single hinge design provides cost-effective antenna mounting solution while maintaining essential features like ratchet fold-down and weather protection.
Ideal for Multiple Applications - Suitable for 4WD vehicles, commercial trucks, boats, caravans, motorhomes, and mobile installations requiring professional antenna mounting.
Universal Antenna Compatibility - Included connectors and adaptors accommodate various antenna types and connection standards simplifying antenna selection and installation.
Technical Specifications
Specification
Details
Brand
UNIDEN
Model
MBM20
Product Type
Antenna Mount with Cable and Connectors
Mounting Design
Ratchet Fold-Down with Single Hinge
Base Type
Square Base Platform
Cable Included
Yes - Pre-Fitted 5 Metres Coaxial Cable
Cable Length
5 Metres (Pre-Installed)
Cable Type
Coaxial Cable for UHF Applications
FME Connector
Yes - FME Plug Connector Included
PL259 Adaptor
Yes - PL259 Adaptor Included
Rain Cap
Yes - Weather Protection for Connections
Fold-Down Capability
Yes - Ratchet Controlled
Hinge Design
Single Hinge for Angle Adjustment
Antenna Compatibility
Standard UHF Antennas with Compatible Thread
Mounting Surfaces
Roof Racks, Bull Bars, Brackets, Flat Surfaces
Weather Protection
Yes - Rain Cap Protects Connections
Installation Type
Bolt-On to Mounting Surface
Mounting Hardware
Not Included - Specific to Mounting Location
Applications
4WD Vehicles, Trucks, Boats, Caravans, Mobile Installations
Connector Types
FME and PL259 Compatibility
Complete Package
Yes - Mount, Cable, Connectors, Rain Cap
Adjustability
Ratchet Positioning and Single Hinge Angle Adjustment
Operating Environment
Outdoor Automotive/Marine Use
Warranty
Standard Manufacturer Warranty
Weight
Standard Antenna Mount Weight
Colour
Black
Design Purpose
Reliable Professional Antenna Mounting with Weather Protection
Frequently Asked Questions
Q: What's the difference between the MBM20 (single hinge) and MBM25 (double hinge) mounts?
A: The primary difference is hinge configuration: MBM20 features single hinge providing one pivot point for forward/backward antenna positioning, offering simpler operation and more economical price. MBM25 features double hinge with two pivot points allowing more complex angle adjustments and positioning flexibility. Both include: ratchet fold-down mechanism, 5m pre-fitted cable, FME connector, PL259 adaptor, rain cap, and square base. Choose MBM20 for straightforward reliable mounting at lower cost, or MBM25 if you need additional positioning flexibility for specific installation challenges.
Q: Does the MBM20 include the UHF antenna or do I need to purchase it separately?
A: The MBM20 is an antenna mount with cable and connectors - the UHF antenna is NOT included and must be purchased separately. This mount is designed to work with standard UHF antennas featuring compatible thread fittings (most common UHF antennas). When purchasing antenna separately, verify thread compatibility and mounting requirements. The included PL259 adaptor accommodates most common UHF antenna base fittings. We can recommend compatible antennas if needed - contact us for antenna recommendations matching your vehicle and application.
Q: Can the single hinge provide enough adjustment for optimal antenna positioning?
A: Yes! The single hinge with ratchet mechanism provides adequate adjustment for most standard installations. The single pivot point allows forward/backward positioning for optimal antenna angle, while the ratchet maintains secure position without slipping. For typical roof rack or bull bar mounting, single hinge adjustment is sufficient for proper antenna orientation. The simpler single hinge design actually benefits many users with: easier operation without complex adjustment procedures, fewer moving parts for improved reliability, and straightforward positioning that's easier to set and maintain. Only specialized installations requiring extreme angle flexibility need double hinge complexity.
Q: Is the 5m cable length the same on both MBM20 and MBM25 models?
A: Yes, both MBM20 (single hinge) and MBM25 (double hinge) include the same 5 metres pre-fitted coaxial cable. The cable length is standardized across both models. Before purchasing either model, measure routing distance from intended antenna mounting location to radio location ensuring 5m is sufficient. Typical routing from roof mount to interior radio usually requires 4-6m. If your installation requires longer cable, consider alternative mounting locations closer to radio. The cable cannot be easily extended without affecting signal quality and voiding warranty.
Q: Where should I mount the MBM20 on my vehicle for best results?
A: Optimal mounting locations for the MBM20 include: (1) Roof rack crossbars - most popular for 4WD vehicles, provides best antenna height and 360° signal coverage; (2) Bull bar top rail - convenient mounting using bull bar brackets, good height and easy installation access; (3) Rear tray/canopy rails - for utes/trucks with rear tray, secure mounting to canopy or tray cross bars; (4) Rear bumper bar - alternative for vehicles without roof racks. Consider: 5m cable reaches radio location, minimal signal obstructions, secure mounting surface available, fold-down mechanism operates without interference, and easy access for maintenance. The single hinge operates in forward/backward direction, so mount where this movement accommodates garage entry or clearance needs.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
RFI BBWM-45 Polished Stainless Steel Wrap Around Bull Bar Bracket - Professional 45mm Diameter Bull Bar Antenna Mount with 6mm Cable Slot, Dual Bolt Installation, and Security Locking Screw
Achieve secure professional bull bar antenna mounting with RFI BBWM-45 Polished Stainless Steel Wrap Around Bracket—featuring vehicle-specific 45mm diameter bull bar compatibility ensuring precise fitment on small-diameter Australian bull bar tubing, heavy-duty 3mm stainless steel construction providing exceptional mounting strength and long-term durability for demanding off-road and highway conditions, professional polished stainless steel finish offering bright metallic appearance complementing chrome and polished bull bars, innovative wrap-around design encircling bull bar tube providing superior mounting security and load distribution compared to standard clamp brackets, integrated 6mm cable slot simplifying antenna installation and cable management eliminating separate routing requirements, dual installation bolts distributing mounting loads across wrap-around design ensuring stable secure attachment, security locking screw preventing unauthorized antenna removal or theft protecting valuable communication equipment, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, universal UHF CB antenna compatibility accommodating spring bases and fixed-mount configurations, part of comprehensive BBWM range offering bull bar bracket options for 45mm, 50mm, 63mm, 73mm, and 76mm diameter applications, and proven RFI quality engineering delivering reliable purpose-built bull bar antenna mounting solution for 4WD touring, commercial vehicles, and off-road communication installations.
Product Overview
Polished wrap around stainless steel bull bar bracket with 6mm cable slot for ease of antenna mounting.
Specifically manufactured to mount antennas onto 45mm diameter bull bars, the BBWM-45 features 3mm stainless steel construction, 6mm cable slot, dual installation bolts and security locking screw. The BBWM range cater for bars of 45, 50, 63 and 73mm diameters.
Key Features
Vehicle-Specific 45mm Bull Bar Diameter Compatibility - Precisely engineered for 45mm diameter bull bar tubes ensuring proper fitment on small-diameter Australian bull bar configurations.
Heavy-Duty 3mm Stainless Steel Construction - Robust 3mm stainless steel material provides exceptional mounting strength and structural rigidity for demanding off-road and highway antenna installations.
Professional Polished Stainless Steel Finish - Bright metallic polished finish provides premium appearance complementing chrome and polished bull bars while maintaining excellent corrosion resistance.
Wrap-Around Design for Superior Security - Innovative bracket encircles bull bar tube providing superior mounting stability and load distribution compared to standard clamp-style brackets.
Integrated 6mm Cable Slot with Dual Bolt Installation - Built-in cable slot simplifies antenna installation while dual installation bolts distribute mounting loads ensuring stable secure attachment to bull bar.
Security Locking Screw Anti-Theft Protection - Integrated security locking screw prevents unauthorized antenna removal protecting valuable UHF CB communication equipment from theft.
Technical Specifications
Specification
Details
Model
BBWM-45
SKU
BBWM-45
Brand
RFI
Product Type
Bull Bar Antenna Bracket (Wrap-Around Design)
Material
Stainless Steel
Material Thickness
3mm (Heavy Duty)
Finish
Polished Stainless Steel
Design
Wrap-around bull bar bracket with cable slot
Bull Bar Diameter Compatibility
45mm
Cable Slot
6mm
Installation Bolts
Dual installation bolts (2 included)
Security Feature
Security locking screw
Vehicle Compatibility
Universal (4WD vehicles, utes, trucks with 45mm bull bars)
Antenna Compatibility
Standard UHF CB antennas, Spring base antennas, Fixed mount antennas
Component Type
Bracket
Drilling Required
No drilling to bull bar (wrap-around clamp design)
Corrosion Protection
Polished stainless steel (natural corrosion resistance)
BBWM Range
Available in 45mm, 50mm, 63mm, 73mm, 76mm diameters
Application
Bull bar antenna mounting, 4WD communication installations, Off-road antenna mounting
Frequently Asked Questions
Q: What is the difference between BBWM-45 and BBWM-45-B?
A: BBWM-45 and BBWM-45-B identical in construction and functionality—sole difference is finish. BBWM-45 features polished stainless steel finish providing bright metallic appearance ideal for chrome or polished bull bars. BBWM-45-B features black powder-coated finish complementing dark-colored or matte black bull bars. Both: 3mm stainless steel, 45mm diameter, 6mm cable slot, dual bolts, security locking screw. Choose BBWM-45 for traditional polished appearance matching chrome accessories. Choose BBWM-45-B for modern matte black aesthetic.
Q: What vehicles use 45mm bull bars?
A: 45mm diameter represents smallest standard bull bar size—common on lightweight bull bars for compact SUVs, smaller 4WD vehicles, and light-duty protection bars. Less common than larger 50mm, 63mm, or 76mm sizes. Popular on nudge bars and aftermarket light-duty protection bars prioritizing weight savings. Measure bull bar tube diameter at proposed mounting location confirming 45mm before purchase.
Q: Will polished stainless finish match my bull bar?
A: BBWM-45 polished stainless steel finish complements chrome, polished stainless, or aluminum bull bars providing coordinated bright metallic appearance. Suitable for traditional styling with chrome accessories and polished components. If bull bar features powder-coated black or matte finish, consider BBWM-45-B black version for better aesthetic match. Polished finish maintains natural stainless corrosion resistance without coating.
Q: Is BBWM-45 suitable for roof rack crossbars?
A: BBWM-45 designed for 45mm bull bar mounting but wrap-around design potentially adaptable to 45mm diameter roof rack crossbars or equipment tubes. Verify tube material and wall thickness adequate supporting antenna weight and wind loads. Roof rack mounting provides elevated antenna position potentially improving UHF range. Ensure installation does not interfere with roof-mounted equipment or vehicle operation.
Q: How accurate must bull bar measurement be for BBWM-45?
A: Measure bull bar diameter accurately using calipers—BBWM-45 specifically engineered for 45mm. Minor tolerance (±1mm) may work but compromises fitment and security. Tubes significantly under 45mm result in loose fitment and inadequate clamping. Tubes over 46mm prevent proper wrap-around engagement. For 50mm diameter use BBWM-50. Accurate measurement ensures proper bracket engagement and secure mounting.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
GMF4x4 PLATE-305 Flat LED UHF Plate with 16mm UHF Hole
A flat LED UHF combination plate from GMF4x4 featuring a 16mm UHF hole, allowing you to mount both LED side lights and a UHF antenna on your bonnet bracket in a single, clean setup.
Product Overview
The GMF4x4 PLATE-305 is a flat LED UHF plate designed to work alongside GMF4x4 bonnet LED light brackets, adding a 16mm UHF antenna hole to your existing LED bracket setup. For drivers wanting to run both a pair of LED side lights on the bonnet and a UHF antenna, the PLATE-305 provides the mounting solution to achieve both from a single bracket installation.
To complete the setup, GMF4x4 bonnet LED light brackets are required and available separately. See our LED Lights and Brackets range for compatible bonnet LED bracket options.
GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally.
Features & Benefits
The flat plate design with a 16mm UHF hole allows a standard UHF antenna to be mounted alongside bonnet LED side lights, combining two accessories on the one bracket without additional fabrication. Designed to pair with GMF4x4 bonnet LED light brackets for a complete, tidy bonnet-mounted lighting and communications setup.
Technical Specs
Specification
Detail
SKU
PLATE-305
Brand
GMF4x4
Type
Flat LED UHF Combination Plate
UHF Hole Diameter
16mm
Compatible With
GMF4x4 Bonnet LED Light Brackets (sold separately)
Origin
Made in Australia
Compatible With
GMF4x4 bonnet LED light brackets (sold separately). See our LED Lights and Brackets range for compatible options.
Frequently Asked Questions
Do I need a separate LED bracket to use this plate?
Yes. The PLATE-305 is designed to be used in conjunction with GMF4x4 bonnet LED light brackets, which are sold separately. See our LED Lights and Brackets range for compatible bonnet LED bracket options.
What size UHF antenna will fit the hole in this plate?
The PLATE-305 features a 16mm UHF hole, which suits standard UHF antenna bases with a 16mm mounting diameter. Please confirm your antenna's base diameter before purchasing.
Are LED lights or a UHF antenna included with this plate?
No. The PLATE-305 is a mounting plate only. LED lights, a UHF antenna, and bonnet LED brackets are all sold separately.
Is this product made in Australia?
Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.
Where can I find compatible bonnet LED brackets?
Compatible GMF4x4 bonnet LED light brackets are available separately in our LED Lights and Brackets range. Please check with us for the correct bracket for your vehicle.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
RFI BHMB-501 Bonnet Hinge Mounting Bracket BYD Shark 6 2024+ Left-Hand Side Australian Passenger Side 4mm Mild Steel Matte Black Finish 16mm Antenna Hole Australian Made Suits CDX-TREME and PRO SERIES Antennas
The RFI BHMB-501 is a bonnet hinge mounting bracket for the BYD Shark 6 (2024+), left-hand side (Australian passenger side). Manufactured from 4mm mild steel with a matte black finish. 16mm antenna mounting hole. Suits RFI CDX-TREME and PRO SERIES antennas. Australian made. Installer packaging.
Product overview
The BHMB-501 mounts to the left-hand bonnet hinge of the BYD Shark 6 (2024 onwards), providing a strong, vehicle-specific antenna mounting position for RFI CDX-TREME and PRO SERIES antennas. Manufactured in Australia from 4mm mild steel with a matte black finish. The 16mm antenna mounting hole suits standard RFI antenna bases. Supplied in installer packaging not retail hang sell.
Features and benefits
Vehicle-specific fit for BYD Shark 6 2024+, left-hand side (Australian passenger side).
4mm mild steel construction: Strong, purpose-built bracket material.
Matte black finish.
16mm antenna mounting hole: Suits RFI CDX-TREME and PRO SERIES antenna bases.
Australian made.
Installer packaging.
Technical specs
Specification
Detail
SKU
BHMB-501
Brand
RFI
Component Type
Bonnet hinge mounting bracket
Suits Vehicle
BYD Shark 6 2024+
Side
LHS (Australian passenger side / USA driver side)
Compatible Antennas
RFI CDX-TREME, RFI PRO SERIES
Antenna Hole
16mm
Material
4mm mild steel
Finish
Matte black
Packaging
Installer packaging
Origin
Australian made
Compatible with
Make
Model
Variant
Years
BYD
Shark 6
All
2024 onwards
Frequently asked questions
What side does the BHMB-501 suit? The BHMB-501 suits the left-hand side, which is the Australian passenger side (or USA driver side).
What is the difference between the BHMB-501 and the BHMB-502? The BHMB-501 is the left-hand side bracket (Australian passenger side). The BHMB-502 is the right-hand side bracket (Australian driver side). Both suit the BYD Shark 6 2024+ with the same 4mm mild steel construction, matte black finish, and 16mm antenna hole.
What antennas does the BHMB-501 suit? The BHMB-501 suits RFI CDX-TREME and PRO SERIES antennas via a 16mm antenna mounting hole.
Is the BHMB-501 retail packaged? No. The BHMB-501 is supplied in installer packaging and is not retail hang sell.
What is the BHMB-501 made from? The BHMB-501 is Australian made from 4mm mild steel with a matte black finish.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer Support
If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment
Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
RFI BHMB-502 Bonnet Hinge Mounting Bracket BYD Shark 6 2024+ Right-Hand Side Australian Driver Side 4mm Mild Steel Matte Black Finish 16mm Antenna Hole Australian Made Suits CDX-TREME and PRO SERIES Antennas
The RFI BHMB-502 is a bonnet hinge mounting bracket for the BYD Shark 6 (2024+), right-hand side (Australian driver side). Manufactured from 4mm mild steel with a matte black finish. 16mm antenna mounting hole. Suits RFI CDX-TREME and PRO SERIES antennas. Australian made. Installer packaging.
Product overview
The BHMB-502 mounts to the right-hand bonnet hinge of the BYD Shark 6 (2024 onwards), providing a strong, vehicle-specific antenna mounting position for RFI CDX-TREME and PRO SERIES antennas. Manufactured in Australia from 4mm mild steel with a matte black finish. The 16mm antenna mounting hole suits standard RFI antenna bases. Supplied in installer packaging not retail hang sell.
Features and benefits
Vehicle-specific fit for BYD Shark 6 2024+, right-hand side (Australian driver side).
4mm mild steel construction: Strong, purpose-built bracket material.
Matte black finish.
16mm antenna mounting hole: Suits RFI CDX-TREME and PRO SERIES antenna bases.
Australian made.
Installer packaging.
Technical specs
Specification
Detail
SKU
BHMB-502
Brand
RFI
Component Type
Bonnet hinge mounting bracket
Suits Vehicle
BYD Shark 6 2024+
Side
RHS (Australian driver side / USA passenger side)
Compatible Antennas
RFI CDX-TREME, RFI PRO SERIES
Antenna Hole
16mm
Material
4mm mild steel
Finish
Matte black
Packaging
Installer packaging
Origin
Australian made
Compatible with
Make
Model
Variant
Years
BYD
Shark 6
All
2024 onwards
Frequently asked questions
What side does the BHMB-502 suit? The BHMB-502 suits the right-hand side, which is the Australian driver side (or USA passenger side).
What antennas does the BHMB-502 suit? The BHMB-502 suits RFI CDX-TREME and PRO SERIES antennas via a 16mm antenna mounting hole.
Is a left-hand side bracket available for the BYD Shark 6 2024+? Contact us to confirm availability of a left-hand side bracket for the BYD Shark 6.
Is the BHMB-502 retail packaged? No. The BHMB-502 is supplied in installer packaging and is not retail hang sell.
What is the BHMB-502 made from? The BHMB-502 is Australian made from 4mm mild steel with a matte black finish.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer Support
If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment
Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
RFI BHMB-503 Bonnet Hinge Mounting Bracket Ford Ranger 2023+ Ford Everest 2023+ and Volkswagen Amarok 2023+ Left-Hand Side Australian Passenger Side 4mm Mild Steel Matte Black Finish 16mm Antenna Hole Australian Made Suits CDX-TREME and PRO SERIES Antennas
The RFI BHMB-503 is a bonnet hinge mounting bracket for the Ford Ranger (2023+), Ford Everest (2023+), and Volkswagen Amarok (2023+), left-hand side (Australian passenger side). Manufactured from 4mm mild steel with a matte black finish. 16mm antenna mounting hole. Suits RFI CDX-TREME and PRO SERIES antennas. Australian made. Installer packaging.
Product overview
The BHMB-503 mounts to the left-hand bonnet hinge of the Ford Ranger (2023+), Ford Everest (2023+), and Volkswagen Amarok (2023+), providing a strong, vehicle-specific antenna mounting position for RFI CDX-TREME and PRO SERIES antennas. Manufactured in Australia from 4mm mild steel with a matte black finish. The 16mm antenna mounting hole suits standard RFI antenna bases. Supplied in installer packaging not retail hang sell.
Features and benefits
Suits Ford Ranger 2023+, Ford Everest 2023+, and Volkswagen Amarok 2023+, left-hand side (Australian passenger side).
4mm mild steel construction: Strong, purpose-built bracket material.
Matte black finish.
16mm antenna mounting hole: Suits RFI CDX-TREME and PRO SERIES antenna bases.
Australian made.
Installer packaging.
Technical specs
Specification
Detail
SKU
BHMB-503
Brand
RFI
Component Type
Bonnet hinge mounting bracket
Side
LHS (Australian passenger side / USA driver side)
Compatible Antennas
RFI CDX-TREME, RFI PRO SERIES
Antenna Hole
16mm
Material
4mm mild steel
Finish
Matte black
Packaging
Installer packaging
Origin
Australian made
Compatible with
Make
Model
Variant
Years
Ford
Ranger
2023+ (Next Gen)
2023 onwards
Ford
Everest
2023+
2023 onwards
Volkswagen
Amarok
2023+
2023 onwards
Frequently asked questions
What vehicles does the BHMB-503 suit? The BHMB-503 suits the Ford Ranger (2023+), Ford Everest (2023+), and Volkswagen Amarok (2023+), left-hand side. Contact us to confirm compatibility with your specific variant before purchasing.
What is the difference between the BHMB-503 and the BHMB-504? The BHMB-503 is the left-hand side bracket (Australian passenger side). The BHMB-504 is the right-hand side bracket (Australian driver side). Both suit the Ford Ranger, Ford Everest, and Volkswagen Amarok 2023+ with the same 4mm mild steel construction, matte black finish, and 16mm antenna hole.
Does the BHMB-503 suit the Ford Ranger Raptor Next Gen? The BHMB-503 is for the standard Ford Ranger Next Gen (2023+). The Ranger Raptor Next Gen RA has its own dedicated bracket see the BHMB-505 for the left-hand side.
What antennas does the BHMB-503 suit? The BHMB-503 suits RFI CDX-TREME and PRO SERIES antennas via a 16mm antenna mounting hole.
Is the BHMB-503 retail packaged? No. The BHMB-503 is supplied in installer packaging and is not retail hang sell.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer Support
If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment
Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
GMF4x4 1014-Strut VW Amarok 2023+ Bonnet Strut Kit with Passenger and Driver Side UHF Brackets
A bonnet strut kit for the VW Amarok 2023+ with both passenger and driver side UHF brackets incorporated, combining effortless bonnet operation with dual UHF antenna mounts in a single kit. All hardware and mounts included. Proudly made in Australia by GMF4x4.
Product Overview
The GMF4x4 1014-Strut is a bonnet strut kit for the VW Amarok 2023+ featuring integrated passenger side and driver side UHF antenna brackets. The kit uses GMF4x4's strongest 3-point connection bracket design and incorporates both UHF mounts directly into the strut assembly, providing dual antenna positions in one clean installation. All hardware and mounts are included.
Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally.
Features & Benefits
The unique 3-point connection bracket design provides the strongest strut mount available for the VW Amarok 2023+ while incorporating both passenger and driver side UHF antenna mounting positions. Running dual antennas or wanting the flexibility to choose either side without committing to a single position, the 1014-Strut provides both in one integrated kit. All hardware and mounts are included.
Technical Specs
Specification
Detail
SKU
1014-Strut
Brand
GMF4x4
Compatible Vehicle
VW Amarok 2023+
Kit Contents
Bonnet Strut Kit with Passenger and Driver Side UHF Brackets Incorporated
Bracket Design
3-Point Connection
UHF Bracket
Passenger Side and Driver Side (incorporated)
LED Bracket
Not Included
Included
All Hardware and Mounts
Origin
Made in Australia
Compatible With
VW Amarok 2023+
Frequently Asked Questions
Are the UHF antennas included with this kit?
No. The 1014-Strut includes the strut kit with passenger and driver side UHF brackets incorporated. UHF antennas are a separate purchase. Please check with us for compatible UHF aerial options.
What makes the 3-point connection design stronger than standard strut mounts?
GMF4x4's unique 3-point connection spreads the mounting load across three points rather than a single pivot, significantly increasing the rigidity and strength of the strut bracket and reducing stress on the bonnet hinge area during operation.
What is the difference between this kit and the 1012 and 1013 variants?
The 1012-Strut includes only a passenger side UHF bracket, and the 1013-Strut includes only a driver side UHF bracket. The 1014-Strut incorporates both passenger and driver side UHF brackets for dual antenna capability or maximum mounting flexibility.
Is all installation hardware included?
Yes. All hardware and mounts required for installation are included in the kit.
Is this product made in Australia?
Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
RFI BHMB-504 Bonnet Hinge Mounting Bracket Ford Ranger 2023+ Ford Everest 2023+ and Volkswagen Amarok 2023+ Right-Hand Side Australian Driver Side 4mm Mild Steel Matte Black Finish 16mm Antenna Hole Australian Made Suits CDX-TREME and PRO SERIES Antennas
The RFI BHMB-504 is a bonnet hinge mounting bracket for the Ford Ranger (2023+), Ford Everest (2023+), and Volkswagen Amarok (2023+), right-hand side (Australian driver side). Manufactured from 4mm mild steel with a matte black finish. 16mm antenna mounting hole. Suits RFI CDX-TREME and PRO SERIES antennas. Australian made. Installer packaging.
Product overview
The BHMB-504 mounts to the right-hand bonnet hinge of the Ford Ranger (2023+), Ford Everest (2023+), and Volkswagen Amarok (2023+), providing a strong, vehicle-specific antenna mounting position for RFI CDX-TREME and PRO SERIES antennas. Manufactured in Australia from 4mm mild steel with a matte black finish. The 16mm antenna mounting hole suits standard RFI antenna bases. Supplied in installer packaging not retail hang sell.
Features and benefits
Suits Ford Ranger 2023+, Ford Everest 2023+, and Volkswagen Amarok 2023+, right-hand side (Australian driver side).
4mm mild steel construction: Strong, purpose-built bracket material.
Matte black finish.
16mm antenna mounting hole: Suits RFI CDX-TREME and PRO SERIES antenna bases.
Australian made.
Installer packaging.
Technical specs
Specification
Detail
SKU
BHMB-504
Brand
RFI
Component Type
Bonnet hinge mounting bracket
Side
RHS (Australian driver side / USA passenger side)
Compatible Antennas
RFI CDX-TREME, RFI PRO SERIES
Antenna Hole
16mm
Material
4mm mild steel
Finish
Matte black
Packaging
Installer packaging
Origin
Australian made
Compatible with
Make
Model
Variant
Years
Ford
Ranger
2023+ (Next Gen)
2023 onwards
Ford
Everest
2023+
2023 onwards
Volkswagen
Amarok
2023+
2023 onwards
Frequently asked questions
What vehicles does the BHMB-504 suit? The BHMB-504 suits the Ford Ranger (2023+), Ford Everest (2023+), and Volkswagen Amarok (2023+), right-hand side. Contact us to confirm compatibility with your specific variant before purchasing.
Does the BHMB-504 suit the Ford Ranger Raptor Next Gen? The BHMB-504 is for the standard Ford Ranger Next Gen (2023+). The Ranger Raptor Next Gen RA has its own dedicated bracket see the BHMB-506 for the right-hand side.
What side does the BHMB-504 suit? The BHMB-504 suits the right-hand side, which is the Australian driver side (or USA passenger side).
What antennas does the BHMB-504 suit? The BHMB-504 suits RFI CDX-TREME and PRO SERIES antennas via a 16mm antenna mounting hole.
Is the BHMB-504 retail packaged? No. The BHMB-504 is supplied in installer packaging and is not retail hang sell.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer Support
If you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment
Buying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
GMF4x4 1012-Strut VW Amarok 2023+ Bonnet Strut Kit with Passenger Side UHF Bracket
A bonnet strut kit for the VW Amarok 2023+ with a passenger side UHF bracket incorporated into the design, combining effortless bonnet operation with a vehicle-specific UHF antenna mount in a single kit. All hardware and mounts included. Proudly made in Australia by GMF4x4.
Product Overview
The GMF4x4 1012-Strut is a bonnet strut kit for the VW Amarok 2023+ featuring an integrated passenger side UHF antenna bracket. The kit uses GMF4x4's strongest 3-point connection bracket design and incorporates the UHF mount directly into the strut assembly, combining two functions in one clean installation. All hardware and mounts are included.
Proudly made in Australia by GMF4x4, with designs, patents, and trademarks registered in Australia and internationally.
Features & Benefits
The unique 3-point connection bracket design provides the strongest strut mount available for the VW Amarok 2023+ while simultaneously incorporating a passenger side UHF antenna mounting position. This eliminates the need for a separate bonnet UHF bracket installation, keeping the setup clean and minimising hardware on the bonnet hinge area. All hardware and mounts are included.
Technical Specs
Specification
Detail
SKU
1012-Strut
Brand
GMF4x4
Compatible Vehicle
VW Amarok 2023+
Kit Contents
Bonnet Strut Kit with Passenger Side UHF Bracket Incorporated
Bracket Design
3-Point Connection
UHF Bracket
Passenger Side (incorporated)
LED Bracket
Not Included
Included
All Hardware and Mounts
Origin
Made in Australia
Compatible With
VW Amarok 2023+
Frequently Asked Questions
Is the UHF antenna included with this kit?
No. The 1012-Strut includes the strut kit with passenger side UHF bracket incorporated. The UHF antenna is a separate purchase. Please check with us for compatible UHF aerial options.
What makes the 3-point connection design stronger than standard strut mounts?
GMF4x4's unique 3-point connection spreads the mounting load across three points rather than a single pivot, significantly increasing the rigidity and strength of the strut bracket and reducing stress on the bonnet hinge area during operation.
Is a driver side UHF bracket version available?
Yes. The 1013-Strut includes a driver side UHF bracket, and the 1014-Strut includes both passenger and driver side UHF brackets. Please check our listings for the configuration that suits your setup.
Is all installation hardware included?
Yes. All hardware and mounts required for installation are included in the kit.
Is this product made in Australia?
Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
