OEX ACX0559/100 Australian Made 2mm Single Core Automotive Cable White 100m Roll OFHC Copper V90 The OEX ACX0559/100 is a 2mm single core automotive cable in white, supplied on a 100m roll. Manufactured in Australia from 99.99% oxygen free high conductivity (OFHC) copper, it is designed for reliable performance across a wide range of 12V and 24V automotive, marine and caravan wiring applications. Rated at 5A continuous at 30°C with V90 rated PVC insulation. RoHS compliant and CAN bus compatible. Product overview The ACX0559/100 is the 100m roll version of the ACX0559 white 2mm single core cable, suited to workshops and trade installers who regularly use white cable across trailer wiring, reverse light circuits and multi-wire harness builds, and prefer the full 100m trade-length supply over the 50m roll. The conductor specification and insulation rating are identical across both roll lengths. White cable is commonly used for specific signal functions in trailer and caravan wiring including reverse light feeds, and as a neutral identifier in multi-wire builds where colour differentiation supports circuit tracing. In Australian automotive wiring, the "2mm" designation refers to the overall cable diameter. The conductor cross-section is 0.5mm² (20AWG) with 18 strands of 0.18mm copper, providing the flexibility needed for routing through tight spaces and around bends. The 99.99% OFHC copper conductor minimises resistance and signal loss, and the UV stabilised V90 PVC insulation handles continuous operating temperatures up to 90°C for underbonnet and outdoor-exposed installations. Ampacity decreases as ambient temperature rises, so underbonnet applications in high-heat environments should be assessed accordingly. Features and benefits 99.99% OFHC copper conductor: Oxygen free high conductivity copper minimises resistance and signal loss across the cable run, maintaining reliable electrical performance in automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. White colour coding: White is commonly used for specific signal circuits in trailer and caravan wiring including reverse light feeds, and as a neutral identifier in multi-wire harness builds where colour differentiation supports circuit tracing and fault finding. UV stabilised PVC insulation: Resists degradation in sun-exposed and underbonnet environments, extending the service life of the cable in outdoor-exposed installation positions. V90 temperature rating: PVC insulation rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 5A rated at 30°C: Suited to lighting, signal wiring and low-current accessory circuits in 12V and 24V systems. 18-strand construction: The 18-strand conductor provides flexibility and resistance to fatigue during installation and in service, well suited to routing through tight spaces and around bends. RoHS compliant: Meets hazardous substance restrictions. CAN bus compatible: Meets the signal integrity requirements for use in modern vehicle communication network environments. 100m roll: Trade-length supply for workshops and fleet installers covering multiple jobs from a single roll. Technical specs Specification Detail SKU ACX0559/100 Brand OEX Cable Type Single Core Automotive Industry Known Size 2mm Conductor Cross Section 0.5mm² Gauge 20AWG Conductor Strands 18 Strand Diameter 0.18mm Conductor Material 99.99% OFHC Copper Amp Rating 5A at 30°C Voltage Rating Up to 100V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Cable Colour White Length 100m Weight 0.5kg Compliance RoHS Warranty One year Sold As 100m roll Frequently asked questions What does "2mm cable" mean is that the conductor size or the overall diameter? In Australian automotive wiring, "2mm" refers to the overall cable diameter, not the conductor cross-section. This cable has a conductor cross-section of 0.5mm² (20AWG) with 18 strands of 0.18mm copper. The 2mm designation is the industry-standard size reference used by auto electricians and suppliers across Australia. What is the difference between the ACX0559 and the ACX0559/100? Both are the same 2mm white OFHC copper single core cable with identical conductor and insulation specifications. The ACX0559 is supplied on a 50m roll and the ACX0559/100 is supplied on a 100m roll. Select based on the quantity required for your installation workload. What is the amp rating for this cable? This cable is rated at 5A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. What does V90 mean? V90 is the Australian cable insulation classification indicating the PVC insulation is rated for continuous operation at up to 90°C. It is the standard specification for automotive-grade PVC insulated cable in Australia and confirms suitability for underbonnet and outdoor-exposed installation positions. Is this cable suitable for CAN bus wiring? Yes. OEX notes this cable as CAN bus compatible, meaning it meets the signal integrity requirements for use in modern vehicle communication network environments. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX0564 Australian Made 2mm Single Core Automotive Cable Pink 50m Roll OFHC Copper V90 The OEX ACX0564 is a 2mm single core automotive cable in pink, supplied on a 50m roll. Manufactured in Australia from 99.99% oxygen free high conductivity (OFHC) copper, it is designed for reliable performance across a wide range of 12V and 24V automotive, marine and caravan wiring applications. Rated at 5A continuous at 30°C with V90 rated PVC insulation. RoHS compliant and CAN bus compatible. Product overview The ACX0564 is the pink 50m variant in the OEX 2mm single core automotive cable range, sharing the same conductor specification and insulation rating as the other colours in the range. Pink cable is used in automotive and trailer wiring installations where an expanded colour palette is needed to differentiate circuits in complex multi-wire harness builds, trailer looms and custom vehicle electrical systems. It provides a distinctive identifier in installations where the standard primary and secondary colours are already in use. The 50m roll suits trade installers and enthusiasts tackling multi-circuit jobs without the commitment of a full 100m roll. In Australian automotive wiring, the "2mm" designation refers to the overall cable diameter. The conductor cross-section is 0.5mm² (20AWG) with 18 strands of 0.18mm copper, providing the flexibility needed for routing through tight spaces and around bends in vehicle bodywork. The 99.99% OFHC copper conductor minimises resistance and signal loss, and the UV stabilised V90 PVC insulation handles continuous operating temperatures up to 90°C for underbonnet and outdoor-exposed installations. Ampacity decreases as ambient temperature rises, so underbonnet applications in high-heat environments should be assessed accordingly. Features and benefits 99.99% OFHC copper conductor: Oxygen free high conductivity copper minimises resistance and signal loss across the cable run, maintaining reliable electrical performance in automotive and marine applications. Australian owned and made: Premium quality copper cable produced locally to Australian automotive wiring standards. Pink colour coding: Pink provides a distinctive additional circuit identifier for complex multi-wire harness builds and trailer looms where the standard primary and secondary colours are already allocated, supporting clear circuit differentiation across all wires in the installation. UV stabilised PVC insulation: Resists degradation in sun-exposed and underbonnet environments, extending the service life of the cable in outdoor-exposed installation positions. V90 temperature rating: PVC insulation rated for continuous operation at up to 90°C, the standard automotive-grade insulation specification in Australia. 5A rated at 30°C: Suited to lighting, signal wiring and low-current accessory circuits in 12V and 24V systems. 18-strand construction: The 18-strand conductor provides flexibility and resistance to fatigue during installation and in service, well suited to routing through tight spaces and around bends. RoHS compliant: Meets hazardous substance restrictions. CAN bus compatible: Meets the signal integrity requirements for use in modern vehicle communication network environments. 50m roll: Practical mid-length format suited to trade and enthusiast installs where a full 100m roll is more than required. Technical specs Specification Detail SKU ACX0564 Brand OEX Cable Type Single Core Automotive Industry Known Size 2mm Conductor Cross Section 0.5mm² Gauge 20AWG Conductor Strands 18 Strand Diameter 0.18mm Conductor Material 99.99% OFHC Copper Amp Rating 5A at 30°C Voltage Rating Up to 100V Insulation Type PVC Temperature Rating V90 (90°C) UV Stabilised Yes Cable Colour Pink Length 50m Weight 0.5kg Compliance RoHS Warranty One year Sold As 50m roll Frequently asked questions What does "2mm cable" mean is that the conductor size or the overall diameter? In Australian automotive wiring, "2mm" refers to the overall cable diameter, not the conductor cross-section. This cable has a conductor cross-section of 0.5mm² (20AWG) with 18 strands of 0.18mm copper. The 2mm designation is the industry-standard size reference used by auto electricians and suppliers across Australia. What is the amp rating for this cable? This cable is rated at 5A continuous at 30°C. Ampacity decreases as ambient temperature rises, so applications in high-heat environments such as underbonnet installations should be assessed against the expected operating temperature before use. What does V90 mean? V90 is the Australian cable insulation classification indicating the PVC insulation is rated for continuous operation at up to 90°C. It is the standard specification for automotive-grade PVC insulated cable in Australia and confirms suitability for underbonnet and outdoor-exposed installation positions. Is this cable suitable for CAN bus wiring? Yes. OEX notes this cable as CAN bus compatible, meaning it meets the signal integrity requirements for use in modern vehicle communication network environments. Is this cable available in other colours or lengths? OEX produces single core automotive cable in a range of colours and roll lengths. Contact us for available colour and length options to suit your specific wiring application. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Simple Clip-In Design For Easy Installation With No Modifications Required! USB-C Pass-ThroughThe Aerpro APUSBTO6 USB-C Pass-Through has been designed specifically to suit various Toyota vehicles. It replaces the spare factory switch blanking plates in the vehicle dashboard that measure 23mm (Wide) x 23mm (High), providing seamless USB-C integration for your vehicle. Featuring a Pass-Through USB-C it is a convenient and discreet connectivity solution for phones and other smart devices to provide sync for Audio, CarPlay & Android Auto when connected to the rear USB input on compatible aftermarket headunits. The port illuminates blue making it easy to find day and night. The clip-in design makes it quick and easy to install, providing a professional and discreet USB upgrade solution for the vehicle. Important Information: The USB-C Pass-Through port is a female connector on the back of the APUSBTO6. This plug does not include a USB-C Flylead which may be required to complete your installation (Sold Separately). Aerpro APUSBTO8 Features: Suitable for Toyota vehicles with 23mm (Wide) x 23mm (High) switch blanking plates. Replaces factory switch blanking plates in the dashboard. Vehicle-specific OEM style design for discreet seamless USB-C integration. The audio/sync port provides USB-C pass-through for Audio, CarPlay & Android Auto when connected to compatible headunits. A simple clip-in design makes it easy to install with no modifications required. Aerpro APUSBTO8 Specifications: Vehicle Application: Various Toyota Vehicles Port Illuminates: Blue Panel Dimensions:Base: 23mm (W) x 23mm (H)Face: 23mm (W) x 23mm (H) Connection Type: USB-CUSB-C: Pass-Through (Audio & Sync) Mounting Type: Clip-In Vehicle Compatibility: Toyota C-HR (2019 - ) Toyota Camry (2017 - ) Toyota Corolla (2018 - 2022) Toyota Fortuner (2020 - ) Toyota Granvia (2019 - ) Toyota HiAce (2019 - ) Toyota Kluger (2021 - ) Toyota Rav4 (2019 - ) Toyota Yaris (2019 - ) Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

OEX ACX3690BL 12V 5A IP65 Illuminated Latching Push Button Switch Red LED Chrome Housing NO and NC Terminals 19mm Mount The OEX ACX3690BL is a 12V, 5A illuminated latching push button switch in an SPST On/Off configuration, with a red LED indicator and IP65 weatherproof rating. The push-on/push-off latching action toggles the circuit between On and Off states with each press, staying in the selected position until pressed again. Chrome plated housing for a premium appearance suited to custom dash panels, marine consoles and accessory installations where aesthetics matter alongside function. Three blade terminals common, normally open (NO) and normally closed (NC) provide wiring flexibility for both standard and normally closed circuit configurations. 19mm mounting hole, 12mm mount length. Covered by a one year warranty. Product overview The ACX3690BL is a latching switch the circuit stays active after the button is released and remains in the selected state until pressed again. This is the correct choice for circuits that need to stay on without holding the button, as opposed to a momentary switch which only activates while held. The three-terminal configuration provides wiring flexibility. The normally open (NO) terminal creates a circuit that is open at rest and closes when the switch is activated the standard configuration for accessory switching. The normally closed (NC) terminal creates a circuit that is closed at rest and opens when the switch is activated used in alarm, interlock and control circuit applications. This flexibility, combined with the IP65 weatherproofing and chrome housing, makes the ACX3690BL suited to both functional control circuit roles and aesthetically conscious panel builds. At 5A it handles low-current loads and relay trigger inputs directly. For loads exceeding 5A, the switch should trigger a relay. Features and benefits Latching push On/push Off: Press to toggle between On and Off. Switch holds position without being held down. Not a momentary switch. Red LED illuminated: Glows when the switch is in the On position for clear status indication. IP65 rated: Fully sealed against dust and protected against water jets from any direction. Suited to external mounting and exposed panel locations. Chrome plated housing: Premium finish for custom panels and marine consoles. 3x blade terminals common, NO and NC: Wire between common and NO for a standard normally open circuit. Wire between common and NC for a normally closed circuit. Suited to both accessory switching and relay trigger inputs. 19mm mounting hole: Standard diameter for illuminated push button switches. 12mm mount length: Suits standard panel thicknesses. One year warranty: Covered by a one year OEX warranty. Technical specs Specification Detail SKU ACX3690BL Brand OEX Switch Type Push Button (Latching) Switch Action On/Off (SPST) Poles 1 Positions 2 Current Rating 5A at 12V Voltage 12V Illumination Red LED IP Rating IP65 Housing Chrome plated Terminals 3x Blade (Common, NO, NC) Mount Diameter 19mm Mount Length 12mm Pack Quantity 1 Weight 0.02kg Warranty One year Sold As Single unit Frequently asked questions Is this a momentary or latching switch? The ACX3690BL is a latching (push On/push Off) switch pressing it toggles the circuit between On and Off states and the switch holds its position until pressed again. It is not a momentary switch; the circuit remains active after the button is released. What are the three terminals for? The three blade terminals are common, normally open (NO) and normally closed (NC). Wire between common and NO for a circuit that is open at rest and closes when the switch is activated standard accessory switching. Wire between common and NC for a circuit that is closed at rest and opens when the switch is activated used in alarm, interlock and control applications where a closed circuit is the normal state. What does IP65 mean for this switch? IP65 means the switch is fully protected against dust ingress (6) and against water jets from any direction (5). This makes it suitable for panel locations exposed to rain, splash and wash-down including external vehicle panels, marine consoles and outdoor equipment enclosures. What mounting hole does this switch require? The ACX3690BL requires a 19mm round mounting hole with sufficient depth for the 12mm mount length. Confirm both the hole diameter and panel thickness before installation. What is the maximum load this switch can handle directly? This switch is rated at 5A at 12V. For loads exceeding 5A, use the switch to trigger a relay rather than wiring the load directly through the switch contacts. The NO and NC terminal options make it well suited as a relay trigger input. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX ACX3692BL 12V 5A IP65 Illuminated Latching Push Button Switch Blue LED Chrome Housing NO and NC Terminals 19mm Mount The OEX ACX3692BL is a 12V, 5A illuminated latching push button switch in an SPST On/Off configuration, with a blue LED indicator and IP65 weatherproof rating. The push-on/push-off latching action toggles the circuit between On and Off states with each press, staying in the selected position until pressed again. Identical in specification to the red ACX3690BL differing only in blue LED illumination it offers an alternative colour option for panels with a blue theme or where different LED colours distinguish switch functions. Chrome plated housing, three blade terminals (common, NO and NC), 19mm mounting hole, 12mm mount length. Covered by a one year warranty. Product overview The ACX3692BL shares every specification with the ACX3690BL 5A at 12V, IP65, chrome plated housing, three blade terminals, 19mm mount hole and 12mm mount length. The only difference is LED colour: red on the ACX3690BL, blue on the ACX3692BL. The blue LED suits panels built around a blue illumination theme, or installations where different colours are used to distinguish switch functions for example, blue for auxiliary circuits and red for warning or power circuits. The latching action means the switch holds its position after being pressed, unlike a momentary switch which only activates while held. The three-terminal configuration provides wiring flexibility: wire between common and NO for standard normally open accessory switching, or between common and NC for a normally closed circuit application. At 5A it handles low-current loads and relay trigger inputs directly. For loads exceeding 5A, the switch should trigger a relay. Features and benefits Latching push On/push Off: Press to toggle between On and Off. Switch holds position without being held down. Not a momentary switch. Blue LED illuminated: Glows when the switch is in the On position. Blue colour for panel theme coordination or function differentiation. IP65 rated: Fully sealed against dust and protected against water jets from any direction. Suited to external mounting and exposed panel locations. Chrome plated housing: Premium finish for custom panels and marine consoles. 3x blade terminals common, NO and NC: Wire between common and NO for standard normally open switching. Wire between common and NC for a normally closed circuit. Full wiring flexibility for both accessory and control circuit applications. 19mm mounting hole: Standard diameter for illuminated push button switches. 12mm mount length: Suits standard panel thicknesses. One year warranty: Covered by a one year OEX warranty. Technical specs Specification Detail SKU ACX3692BL Brand OEX Switch Type Push Button (Latching) Switch Action On/Off (SPST) Poles 1 Positions 2 Current Rating 5A at 12V Voltage 12V Illumination Blue LED IP Rating IP65 Housing Chrome plated Terminals 3x Blade (Common, NO, NC) Mount Diameter 19mm Mount Length 12mm Pack Quantity 1 Weight 0.02kg Warranty One year Sold As Single unit Frequently asked questions Is this a momentary or latching switch? The ACX3692BL is a latching (push On/push Off) switch pressing it toggles the circuit between On and Off states and the switch holds its position until pressed again. It is not a momentary switch; the circuit remains active after the button is released. What are the three terminals for? The three blade terminals are common, normally open (NO) and normally closed (NC). Wire between common and NO for a circuit that is open at rest and closes when the switch is activated standard accessory switching. Wire between common and NC for a circuit that is closed at rest and opens when the switch is activated used in alarm, interlock and control circuit applications. How does the ACX3692BL differ from the ACX3690BL? The ACX3692BL and ACX3690BL are identical in all specifications 5A, 12V, IP65, chrome plated, 3 terminals, 19mm mount, 12mm length. The only difference is LED colour: the ACX3690BL has a red LED and the ACX3692BL has a blue LED. Select based on your panel's colour scheme or function coding convention. What does IP65 mean for this switch? IP65 means the switch is fully protected against dust ingress (6) and against water jets from any direction (5). This makes it suitable for panel locations exposed to rain, splash and wash-down including external vehicle panels, marine consoles and outdoor equipment enclosures. What is the maximum load this switch can handle directly? This switch is rated at 5A at 12V. For loads exceeding 5A, use the switch to trigger a relay rather than wiring the load directly through the switch contacts. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less