Simple Clip-In Design For Easy Installation With No Modifications Required! USB-C Pass-Through & USB Charge SocketThe Aerpro APUSBTO7 USB-C Pass-Through and USB Charge have been designed specifically to suit various Toyota vehicles. It replaces the spare factory switch blanking plates in the vehicle dashboard that measure 21mm (Wide) x 32mm (High), providing seamless USB integration for your vehicle. Featuring two USB ports, USB-C Pass-Through is designed for smartphone and device fast charging at 3A max and the other provides sync for Audio, CarPlay & Android Auto when connected to the rear USB input on compatible aftermarket headunits. The second USB port is used for charging only allowing for multiple phones to be charged on the go! The charge port illuminates blue making it easy to find day and night. The clip-in design combined with the simple 3 wire plus USB connection, makes it quick and easy to install, providing a professional and discreet USB upgrade solution for the vehicle.Important Information: The USB-C Pass-Through port is a female connector on the back of the APUSBTO7. This plug does not include a USB-C Flylead which may be required to complete your installation (Sold Separately). Aerpro APUSBTO7 Features: Suitable for Toyota vehicles with 21mm (Wide) x 32mm (High) switch blanking plates. Replaces factory switch blanking plates in the dashboard. Vehicle-specific OEM-style design for discreet seamless USB integration. Dual USB ports, type C and type A to provide fast charge and one sync Pass-Through. The charge port supports up to 3 amps max and illuminates blue. The audio/sync port provides USB-C Pass-Through for Audio, CarPlay & Android Auto when connected to compatible headunits. Ferrite choke on USB cable to reduce signal interference. A simple clip-in design makes it easy to install with no modifications required. 3-wire installation; accessory power, illumination, earth/ground, plus USB connection. Aerpro APUSBTO7 Specifications: Vehicle Application: Various Toyota Vehicles Panel Dimensions:Base: 21mm (W) x 32mm (H)Face: 21mm (W) x 32mm (H) Connection Type: USB-A + USB-C USB-A: Fast Charge 3.0A Max USB-C: Pass-Through (Audio & Sync) Mounting Type: Clip-In Wiring Installation: 12V+ Accessory Power: Red Earth: Black Illumination: Blue USB1 Connection: USB-A USB2 Connection: USB-C Vehicle Compatibility: Subaru BRZ (2017 - ) Toyota Camry (2012 - 2017) Toyota Corolla (2007 - 2011) Toyota HiAce (2012 - 2019) Toyota Hilux (2015 - 2020) Toyota Hilux (2020 - ) Toyota Landcruiser 200 Series (2007 - 2011) Toyota Landcruiser 200 Series (2012 - 2015) Toyota Landcruiser (2012 - 2021) 200 Series (GX Only) Toyota Prado 150 Series (2009 - 2013) Toyota RAV4 (2006 - 2011) Toyota Tundra (2007 - 2013) Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4010-PH-S Toyota Hilux N80 2015+ Phone Holder A vehicle-specific powder coated black phone holder for the Toyota Hilux N80 2015+, designed and manufactured in Australia by GMF4x4 to be fully compliant with Australian Design Rules and airbag systems for safe, legal, and secure in-vehicle phone mounting. Product Overview The GMF4x4 4010-PH-S is a purpose-built phone holder engineered specifically for the Toyota Hilux N80 2015+. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4010-PH-S is designed specifically for the Toyota Hilux N80 2015+ and cannot be transferred to another vehicle type. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4010-PH-S fits precisely within the Toyota Hilux N80 interior without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps your phone within easy reach of the driver, optimally positioned for navigation visibility without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4010-PH-S Brand GMF4x4 Compatible Vehicle Toyota Hilux N80 2015+ Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Toyota Hilux N80 2015+ Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4010-PH-S is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4010-PH-S is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4010-PH-S is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. What is the difference between the 4010-PH-S and the 4009-PH-D for the Hilux N80? The 4010-PH-S is a phone-only holder. The 4009-PH-D includes both a phone position and a UHF handpiece position. If you also need to mount a UHF handpiece, the 4009-PH-D is the recommended option. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 81103BL: Power Up Anywhere – The Ultimate Vehicle Charging Solution! Narva 81103BL - Unleash Portable Power in the Toughest Conditions Product Overview Transform your vehicle's electrical system with the Narva 81103BL Heavy Duty USB Socket – the ultimate charging companion for tradies, adventurers, and road warriors. Designed to withstand Australia's most demanding automotive environments, this robust USB socket delivers reliable power wherever your journey takes you. Narva 81103BL Features & Benefits Universal Voltage Compatibility - Seamlessly operates across 12-24V DC systems, making it perfect for 4WDs, trucks, boats, and work vehicles Dual Charging Capability - Simultaneous 5V 3A USB-A and USB-C charging keeps all your critical devices powered up on the go Precision Engineering - 29mm mounting diameter ensures easy installation in standard vehicle dashboards and control panels Rugged Construction - Built to Narva's legendary quality standards, ready to tackle Australian road conditions from coastal tracks to outback highways Professional-Grade Design - Ideal for tradies, overlanders, and anyone who needs reliable mobile device charging in harsh environments Technical Specifications: Type: Automotive USB Charging Socket Material: Heavy-Duty Electrical Grade Plastic Input Voltage: 12-24V DC Output: 5V 3A USB-A + 5V 3A USB-C Mounting Opening: 29mm diameter Hardware: Socket, Mounting Hardware Applications: Automotive, Marine, 4WD, Truck, Recreational Vehicles Environment: Vibration-Resistant, Dust-Protected Packaging: Retail Blister Pack Compatible With / Goes Well With Narva USB Extension Cables 12V Power Adapters Smartphone Mounting Brackets Portable GPS Units Dash Cam Power Accessories Installation Applications: Vehicle Dashboards: Seamless integration into standard vehicle control panels Marine Installations: Reliable power for boats and marine craft 4WD Setups: Essential charging point for off-road expeditions Work Vehicles: Keeps communication devices charged on job sites Recreational Vehicles: Power solutions for caravans and campers Frequently Asked Questions How do I install the Narva 81103BL USB Socket? Requires a 29mm mounting hole. Professional installation recommended for best results. Is this socket waterproof? Designed for dust and vibration resistance, but not fully waterproof. Best used in protected interior locations. What devices can I charge? Compatible with most USB-A and USB-C devices including smartphones, tablets, GPS units, and small electronics. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AERPRO APCCTO6 - Dual USB Charger USB-C PD36W / USB-A QC3.0 Toyota 22mm x 40mm | Simultaneous Fast Charging Professional OEM-style dual USB charger with fast charging technology designed specifically for Toyota vehicle dashboard integration Product Overview The AERPRO APCCTO6 delivers comprehensive charging performance through precision-engineered dual USB charger designed specifically for Toyota vehicles with 22mm x 40mm switch blanking plates. This OEM-style replacement combines USB-C Power Delivery 36W and USB-A Quick Charge 3.0 technology for simultaneous fast charging of multiple devices, providing seamless dashboard integration with blue LED illumination and simple clip-in installation that maintains factory appearance while adding modern charging capability. What Makes This Charger Special Vehicle-Specific OEM Integration – Designed specifically for Toyota vehicles with 22mm wide x 40mm high switch blanking plates, providing direct factory replacement that maintains clean, integrated appearance without dashboard modification while delivering professional-grade charging functionality Dual Fast Charging Technology – Features USB-C Power Delivery 36W for rapid charging of compatible smartphones, tablets, and devices, plus USB-A Quick Charge 3.0 for simultaneous second device charging, ensuring everyone stays powered with optimal charging speeds Professional Installation Design – Simple clip-in fitment with easy 3-wire connection (accessory power, illumination, ground) enables clean OEM-style upgrade without modification, while blue LED illumination provides easy day/night visibility for convenient use High-Performance Charging Capability – Supports up to 3 amps maximum per port with advanced charging protocols for efficient power delivery, ensuring devices charge quickly and safely while maintaining compatibility with wide range of modern electronic devices Technical Specs Vehicle Application: Various Toyota vehicles with compatible blanking plates Panel Dimensions: 22mm (W) x 40mm (H) base and face USB-C Port: Power Delivery 36W fast charging capability USB-A Port: Quick Charge 3.0 technology for rapid charging Maximum Charge Rate: Up to 3 amps per port LED Illumination: Blue LED for easy day/night visibility Mounting Type: Clip-in design for simple installation Installation Requirements: 3-wire connection system Wiring Configuration: Red (12V+ accessory power), Black (earth/ground), Blue (illumination) Compatibility: Modern smartphones, tablets, and USB-powered devices Construction: Professional-grade materials for automotive environment Frequently Asked Questions Which Toyota vehicles is this dual charger compatible with? This dual charger is designed for Toyota vehicles equipped with 22mm wide x 40mm high switch blanking plates in the dashboard. The specific fitment replaces factory blanking plates with this functional charging solution, maintaining OEM appearance while adding modern charging capability. What's the difference between USB-C PD36W and USB-A QC3.0 charging? USB-C Power Delivery 36W provides the fastest charging for compatible devices including modern smartphones and tablets, while USB-A Quick Charge 3.0 offers rapid charging for devices using traditional USB-A connections. Both ports can operate simultaneously for dual-device charging. How difficult is the installation process? Installation is simplified through clip-in design that replaces factory blanking plates without modification. The 3-wire connection (red for accessory power, black for ground, blue for illumination) integrates with existing vehicle electrical system for professional OEM-style installation. Does the blue LED illumination integrate with vehicle lighting? Yes, the blue illumination wire connects to the vehicle's existing illumination circuit, ensuring the LED operates in sync with dashboard lighting and can be controlled through vehicle lighting systems for appropriate day/night visibility. Can both USB ports charge devices simultaneously at full speed? Yes, the charger is designed to support simultaneous charging through both ports, with each port capable of up to 3 amps maximum charging rate. The advanced charging protocols ensure optimal power delivery to both connected devices without compromising charging speed. How does this compare to single-port chargers? This dual-port charger provides simultaneous charging capability for two devices, ideal for driver and passenger use. The 22x40mm size accommodates larger blanking plates while the dual-port design eliminates the need for multiple charging accessories. How It Works Professional OEM Integration System – Remove existing Toyota blanking plate and clip the APCCTO6 into the 22mm x 40mm opening. Connect the 3-wire harness to accessory power, ground, and illumination circuits. The dual USB ports provide simultaneous fast charging with USB-C PD36W and USB-A QC3.0 technology while blue LED illumination ensures easy visibility day and night. Compatible With / Goes Well With Device Compatibility: Modern smartphones, tablets, GPS units, dash cameras, and other USB-powered devices requiring fast charging capability Vehicle Integration: Toyota vehicles with 22mm x 40mm dashboard blanking plates, professional automotive electrical installation systems Professional Services: Authorized automotive electrical installers, Toyota dealership service departments, mobile electronics installation specialists familiar with dashboard integration Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

AERPRO APCCNS4 - Dual USB Charger USB-C PD36W / USB-A QC3.0 Nissan 21mm x 36mm | Compact Dual Charging Professional OEM-style dual USB charger with fast charging technology designed specifically for Nissan vehicle dashboard integration Product Overview The AERPRO APCCNS4 delivers comprehensive charging performance through precision-engineered dual USB charger designed specifically for Nissan vehicles with 21mm x 36mm switch blanking plates. This OEM-style replacement combines USB-C Power Delivery 36W and USB-A Quick Charge 3.0 technology for simultaneous fast charging of multiple devices, providing seamless dashboard integration with blue LED illumination and simple clip-in installation that maintains factory appearance while adding modern charging capability. What Makes This Charger Special Vehicle-Specific Nissan Integration – Designed specifically for Nissan vehicles with 21mm wide x 36mm high switch blanking plates, providing direct factory replacement that maintains clean, integrated appearance without dashboard modification while delivering professional-grade charging functionality Dual Fast Charging Technology – Features USB-C Power Delivery 36W for rapid charging of compatible smartphones, tablets, and devices, plus USB-A Quick Charge 3.0 for simultaneous second device charging, ensuring everyone stays powered with optimal charging speeds Professional Installation Design – Simple clip-in fitment with easy 3-wire connection (accessory power, illumination, ground) enables clean OEM-style upgrade without modification, while blue LED illumination provides easy day/night visibility for convenient use High-Performance Charging Capability – Supports up to 3 amps maximum per port with advanced charging protocols for efficient power delivery, ensuring devices charge quickly and safely while maintaining compatibility with wide range of modern electronic devices Technical Specs Vehicle Application: Various Nissan vehicles with compatible blanking plates Panel Dimensions: Base: 22mm (W) x 41mm (H), Face: 21mm (W) x 36mm (H) USB-C Port: Power Delivery 36W fast charging capability USB-A Port: Quick Charge 3.0 technology for rapid charging Maximum Charge Rate: Up to 3 amps per port LED Illumination: Blue LED for easy day/night visibility Mounting Type: Clip-in design for simple installation Installation Requirements: 3-wire connection system Wiring Configuration: Red (12V+ accessory power), Black (earth/ground), Blue (illumination) Compatibility: Modern smartphones, tablets, and USB-powered devices Construction: Professional-grade materials for automotive environment Frequently Asked Questions Which Nissan vehicles is this dual charger compatible with? This dual charger is designed for Nissan vehicles equipped with 21mm wide x 36mm high switch blanking plates in the dashboard. The specific fitment replaces factory blanking plates with this functional charging solution, maintaining OEM appearance while adding modern charging capability. What's the difference between USB-C PD36W and USB-A QC3.0 charging? USB-C Power Delivery 36W provides the fastest charging for compatible devices including modern smartphones and tablets, while USB-A Quick Charge 3.0 offers rapid charging for devices using traditional USB-A connections. Both ports can operate simultaneously for dual-device charging. How difficult is the installation process? Installation is simplified through clip-in design that replaces factory blanking plates without modification. The 3-wire connection (red for accessory power, black for ground, blue for illumination) integrates with existing vehicle electrical system for professional OEM-style installation. Does the blue LED illumination integrate with vehicle lighting? Yes, the blue illumination wire connects to the vehicle's existing illumination circuit, ensuring the LED operates in sync with dashboard lighting and can be controlled through vehicle lighting systems for appropriate day/night visibility. Can both USB ports charge devices simultaneously at full speed? Yes, the charger is designed to support simultaneous charging through both ports, with each port capable of up to 3 amps maximum charging rate. The advanced charging protocols ensure optimal power delivery to both connected devices without compromising charging speed. How does this compare to the APCCNS3 for different Nissan models? The APCCNS4 features a more compact 21x36mm face dimension compared to the APCCNS3's 24x31mm, making it suitable for different Nissan dashboard configurations. Both provide identical dual-port charging performance but fit different blanking plate sizes across various Nissan models. How It Works Professional OEM Integration System – Remove existing Nissan blanking plate and clip the APCCNS4 into the 21mm x 36mm opening. Connect the 3-wire harness to accessory power, ground, and illumination circuits. The dual USB ports provide simultaneous fast charging with USB-C PD36W and USB-A QC3.0 technology while blue LED illumination ensures easy visibility day and night. Compatible With Device Compatibility: Modern smartphones, tablets, GPS units, dash cameras, and other USB-powered devices requiring fast charging capability Vehicle Integration: Nissan vehicles with 21mm x 36mm dashboard blanking plates, professional automotive electrical installation systems Professional Services: Authorized automotive electrical installers, Nissan dealership service departments, mobile electronics installation specialists familiar with dashboard integration

Read more less

Radiused to Protect Cable Insulation P Clip Cable ClampsMade from UL approved nylon 66,94V-2 DNA WCP003 Specifications: Screw Hole Size: 4.8mm Diameter Cable Size: 3.2mm (1/8") Colour: Black Pack Size: 100 Pieces Packaging: Euro Heat Sealed Poly Bag with Hang Hole Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less

OEX Mini Relay 12V Normally Open 70A - Resistor Protected, Sealed: Designed to Work with Relay OEX ACX1944RBL Features: Mini Relay 70A – Standard Resistor Voltage: 12V Amps: 70A Sealed, IP67 No. of Pins: 4 Standard NO Contact Resistor Protected Blade Terminals Moulded Mounting Tab 87 & 30 pin = 9.5mm Legendary Products & Support From Authorized Dealers When you choose OEX, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized OEX dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by OEX's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized OEX dealer today!

Read more less

Stinger SPXSH440 SwitchHUB 4-Channel 100A Solid State Relay Block Replace up to four mechanical relays with one clean, silent, IPX6-rated solid state relay block 100A total continuous output, thermal and short circuit protection per channel, and direct integration with the Stinger SPXM1 powersports media centre. Product Overview The Stinger SPXSH440 SwitchHUB is a 4-channel solid state relay block designed to replace conventional mechanical relays in powersports, marine, and off-road vehicle installations. It delivers 100A of total continuous output across four independent channels (1x 40A and 3x 20A), with each channel individually controllable via positive or negative low-current trigger inputs. Unlike mechanical relays, solid state relays operate silently and produce minimal electrical interference. Each channel includes thermal overload and short circuit protection, with built-in LED indicators for at-a-glance status monitoring of active/inactive states and protection events. The SPXSH440 is designed for direct integration with the Stinger SPXM1 powersports media centre, allowing remote control of connected devices from the head unit itself. Please note: Each channel accepts either a negative or positive trigger input both cannot be used simultaneously on the same channel. Features & Benefits Replaces up to 4 mechanical relays in a single compact unit 4 independent solid state output channels 1x 40A output + 3x 20A outputs (100A total continuous) Positive or negative low-current trigger input per channel Thermal overload and short circuit protection per channel Active/inactive and thermal/short circuit LED status indicators Precision grub screw terminals for secure connections Silent operation — no mechanical relay noise or interference IPX6 rated — water and dust resistant for marine and off-road use Compatible with Stinger SPXM1 powersports media centre for direct device control Technical Specs Specification Detail SKU / Part Number SPXSH440 Brand Stinger Type Solid State Relay Block Output 1 40A Outputs 2–4 20A x 3 Total Continuous Output 100A Trigger Input Negative or positive low-current (per channel, not simultaneous) Input Channels 4x Negative + 4x Positive Trigger Inputs Protection Thermal overload and short circuit per channel Status Indicators Active/inactive LEDs + thermal/short circuit LEDs Terminals Precision grub screw IP Rating IPX6 Compatible Head Unit Stinger SPXM1 (direct remote control) What's in the Box 1x SPXSH440 Relay Block, 1x Quick Start Guide Compatible With / Goes Well With Direct Vehicle Fit: Universal — powersports vehicles, ATVs, UTVs, boats, marine vessels, 4x4 and off-road vehicles Goes Well With: Stinger SPXM1 2.7" powersports media centre (direct integration for device control) Stinger SPX350X2 powersports amplifier Stinger SPXULED1, SPXULEDA, SPXULEDB rock lights (switched control via relay outputs) 12V accessories and switched loads requiring high-current relay control Frequently Asked Questions What is the advantage of a solid state relay over a mechanical relay? Solid state relays have no moving parts, which means they operate silently and produce significantly less electrical interference than conventional mechanical relays. They are also more reliable over time as there are no contacts to wear out or corrode — particularly important in marine and off-road environments. Can I use both positive and negative triggers on the same channel simultaneously? No. Each channel accepts either a positive or a negative trigger input — both cannot be active on the same channel at the same time. Choose the trigger type that suits your installation for each channel independently. What does IPX6 mean for this relay block? IPX6 means the SPXSH440 is protected against powerful water jets from any direction. This makes it suitable for marine, powersports, and off-road installations where exposure to water spray, rain, and splash is expected. It is not rated for full submersion. Does this relay block work with head units other than the SPXM1? Yes. The SPXSH440 can be triggered by any 12V low-current positive or negative signal, making it compatible with a wide range of switches, head units, and control systems beyond the SPXM1. The SPXM1 integration allows for direct remote control from the head unit itself. How many total amps can the SPXSH440 handle continuously? The SPXSH440 provides 100A of total continuous output across all four channels — 40A on output 1 and 20A on each of outputs 2, 3, and 4. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

EVC Throttle Controller to Suit Isuzu D-Max The EVC Throttle Controller reduces throttle lag and improves throttle response by providing new points of reference for the vehicles throttle mapping. It introduces either a sharper or duller throttle curve depending on which of the 4 driving modes have been selected. Driving Modules: Ultimate (U) Performance mode 10 different adjustability levels to make the sharpness of your throttle as mild or as wild as you like The higher you go the sharper your throttle response becomes Perfect for everyday driving and towing Allows you to get up to speed quicker and with less effort Improves the overall drivability of your vehicle Economy (E) 10 adjustability levels so you can soften your throttle as much as you need The higher you go the more dampened your throttle responses becomes Provides more controlled application of power to your wheels Perfect for low-speed towing manoeuvres and low traction situations such as when driving on slippery roads or 4WD driving Automatic Control (AC) Set-and-forget mode Monitors your current driving behaviour and delivers the most suitable throttle response in real-time to match your driving style Handy in towing situations or long drives on varying terrain as it will adjust accordingly Normal (--) Replicates your factory throttle mapping Essentially turns the EVC off Perfect if someone is borrowing your car and isn't used to the EVC or if you wish to put your car back to stock settings Ultimate9 EVC171 Features: Four driving modes 20 adjustable settings Programmable to either manual or automatic transmissions Available for most makes and models Intuitive LED screen Lifetime replacement warranty 30 day money back guarantee Vehicle Specific - Select your vehicle via Rego Search Vehicle Compatibility: ISUZU D-MAX RG 3.0L 4JJ3-TCX DOHC 16v Turbo Diesel Direct Inj. 4cyl 140kW 6sp Auto 2dr Cab Chassis & Pickup 4WD [01/20 ON] ISUZU D-MAX RG 3.0L 4JJ3-TCX DOHC 16v Turbo Diesel Direct Inj. 4cyl 140kW 6sp Auto 2dr Cab Chassis & Pickup RWD [01/20 ON] ISUZU D-MAX RG 3.0L 4JJ3-TCX DOHC 16v Turbo Diesel Direct Inj. 4cyl 140kW 6sp Auto 4dr Cab Chassis & Pickup 4WD [01/20 ON] ISUZU D-MAX RG 3.0L 4JJ3-TCX DOHC 16v Turbo Diesel Direct Inj. 4cyl 140kW 6sp Auto 4dr Cab Chassis & Pickup RWD [01/20 ON] ISUZU D-MAX RG 3.0L 4JJ3-TCX DOHC 16v Turbo Diesel Direct Inj. 4cyl 140kW 6sp Man 2dr Cab Chassis & Pickup 4WD [01/20 ON] ISUZU D-MAX RG 3.0L 4JJ3-TCX DOHC 16v Turbo Diesel Direct Inj. 4cyl 140kW 6sp Man 2dr Cab Chassis & Pickup RWD [01/20 ON] ISUZU D-MAX RG 3.0L 4JJ3-TCX DOHC 16v Turbo Diesel Direct Inj. 4cyl 140kW 6sp Man 4dr Cab Chassis & Pickup 4WD [01/20 ON] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Auto 2dr Cab Chassis & Pickup 4WD [01/12 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Auto 2dr Cab Chassis RWD [01/14 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Auto 4dr Cab Chassis & Pickup 4WD [01/12 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Auto 4dr Cab Chassis & Pickup RWD [01/12 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Man 2dr Cab Chassis & Pickup 4WD [01/12 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Man 2dr Cab Chassis RWD [01/12 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Man 4dr Cab Chassis & Pickup 4WD [01/12 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 5sp Man 4dr Cab Chassis & Pickup RWD [01/12 - 12/16] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 6sp Auto 2dr Cab Chassis & Pickup 4WD [01/16 - 12/20] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 6sp Auto 2dr Cab Chassis RWD [01/16 - 12/20] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 6sp Auto 4dr Cab Chassis & Pickup 4WD [01/16 - 12/20] ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 6sp Auto 4dr Cab Chassis & Pickup RWD [01/16 - 12/20]  ISUZU D-MAX TF II 3.0L 4JJ1-TC DOHC 16v Turbo Diesel Direct Inj. 4cyl 130kW 6sp Man 2dr Cab Chassis & Pickup 4WD [01/16 - 12/20] Legendary Products & Support From Authorized Dealers When you choose Ultimate9, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Ultimate9 dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Ultimate9's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Ultimate9 dealer today!

Read more less

GMF4x4 SW-1012 Next Gen Ford Ranger Wildtrak, Platinum, Limited, Raptor and Everest Switch Panel Insert Suits 12 Inch Screen A powder coated stainless mesh switch panel insert for the Next Gen Ford Ranger Wildtrak, Platinum, Limited, Raptor, and Everest with a 12 inch touch screen, providing 4 aftermarket Toyota-style switch positions and a factory USB socket remount in a stylish clip-in panel. Installs in approximately 5 minutes. Proudly made in Australia by GMF4x4. Product Overview The GMF4x4 SW-1012 is a stainless mesh switch panel insert designed specifically for the Next Gen Ford Ranger Wildtrak, Platinum, Limited, Raptor, and Everest with a 12 inch touch screen. The quick clip-in design allows four aftermarket Toyota-style switches to be installed neatly alongside the factory USB socket, which is remounted within the panel for a clean, factory-style finish. The panel is powder coated black and installs in approximately 5 minutes with no drilling required. One stainless mesh panel and installation instructions are included. For Next Gen Ranger models fitted with a 10 inch touch screen (XL, XLS, XLT, Sport), please refer to our separate 10 inch listings. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. What's in the Box 1x Stainless Mesh Switch Panel 1x Installation Instructions Features & Benefits The clip-in design requires no drilling and installs in approximately 5 minutes, providing a clean and professional switch mounting solution without permanent modification to the vehicle. Four Toyota-style aftermarket switch positions allow accessories such as lights, lockers, air compressors, and other 12V accessories to be controlled from a single organised panel location. The factory USB socket is remounted within the panel, keeping the USB port accessible and integrating it into the new switch panel layout without losing factory functionality. The powder coated black finish and stainless mesh construction provide a durable, premium appearance that complements the Next Gen Ranger and Everest interior. Technical Specs Specification Detail SKU SW-1012 Brand GMF4x4 Compatible Vehicles Next Gen Ford Ranger Wildtrak / Platinum / Limited / Raptor / Everest Compatible Screen Size 12 Inch Touch Screen Not Compatible With Next Gen Ranger with 10" screen (see separate listings) Switch Positions 4 x Toyota-Style Aftermarket Switch Positions Factory USB Yes, remounted within panel Panel Material Stainless Mesh Finish Powder Coated Black Mounting Method Clip-in Drilling Required No Installation Time Approx. 5 minutes Included 1x Stainless Mesh Panel, 1x Installation Instructions Origin Made in Australia Compatible With Next Gen Ford Ranger Wildtrak (12 inch touch screen) Next Gen Ford Ranger Platinum (12 inch touch screen) Next Gen Ford Ranger Limited (12 inch touch screen) Next Gen Ford Raptor (12 inch touch screen) Ford Everest (12 inch touch screen) Not compatible with Next Gen Ranger models fitted with a 10 inch touch screen. Frequently Asked Questions How do I know if my Ranger has a 12 inch or 10 inch screen? The 12 inch touch screen is fitted to the Wildtrak, Platinum, Limited, Raptor, and Everest variants of the Next Gen Ranger platform. The XL, XLS, XLT, and Sport variants use a 10 inch screen. If you are unsure, please check with us before purchasing. What type of switches fit this panel? The SW-1012 accommodates four Toyota-style aftermarket switches. Please check with us for compatible switch options if required. Does installation require drilling? No. The SW-1012 uses a quick clip-in design that installs in approximately 5 minutes without any drilling or permanent modification to the vehicle. I have a Next Gen Ranger XLT or Sport. Will this fit? No. The XLT and Sport use a 10 inch touch screen. Please see our separate SW-1010B listing for the XLT and Sport, or the SW-1010A listing for the XL and XLS. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4012-PH-S Isuzu DMAX 2021-2024 Phone Holder A vehicle-specific powder coated black phone holder for the Isuzu DMAX 2021-2024, designed and manufactured in Australia by GMF4x4 to be fully compliant with Australian Design Rules and airbag systems for safe, legal, and secure in-vehicle phone mounting. Product Overview The GMF4x4 4012-PH-S is a purpose-built phone holder engineered specifically for the Isuzu DMAX 2021-2024. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4012-PH-S is designed specifically for the Isuzu DMAX 2021-2024 and cannot be transferred to another vehicle type. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4012-PH-S fits precisely within the Isuzu DMAX interior without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps your phone within easy reach of the driver, optimally positioned for navigation visibility without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4012-PH-S Brand GMF4x4 Compatible Vehicle Isuzu DMAX 2021-2024 Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Isuzu DMAX 2021-2024 Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why do the product photos show a Next Gen Ranger and not an Isuzu DMAX? The product photos were taken on a Next Gen Ranger for example purposes. The 4012-PH-S is designed and confirmed specifically for the Isuzu DMAX 2021-2024. Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4012-PH-S is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4012-PH-S is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4012-PH-S is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4018-PH-S Phone Holder Suits Ford Ranger PX2-PX3, Ford Raptor PX, Ford Everest PX and Mazda BT-50 A vehicle-specific powder coated black phone holder designed and manufactured in Australia by GMF4x4, fully compliant with Australian Design Rules and airbag systems. Suits the Ford Ranger PX2-PX3 2015-2021, Ford Raptor PX 2018-2021, Ford Everest PX 2015-2021, and Mazda BT-50 2018-2020. Product Overview The GMF4x4 4018-PH-S is a purpose-built phone holder confirmed compatible across the Ford Ranger PX2-PX3 2015-2021, Ford Raptor PX 2018-2021, Ford Everest PX 2015-2021, and Mazda BT-50 2018-2020. These models share a common interior configuration that allows the same bracket to fit across all variants. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4018-PH-S is designed specifically for the listed vehicles and cannot be transferred to other vehicle types. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4018-PH-S fits precisely within compatible vehicle interiors without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps your phone within easy reach of the driver, optimally positioned for navigation visibility without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4018-PH-S Brand GMF4x4 Compatible Vehicles Ford Ranger PX2-PX3 2015-2021 / Ford Raptor PX 2018-2021 / Ford Everest PX 2015-2021 / Mazda BT-50 2018-2020 Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Ford Ranger PX2-PX3 2015-2021 Ford Raptor PX 2018-2021 Ford Everest PX 2015-2021 Mazda BT-50 2018-2020 Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why does one bracket fit all four of these vehicles? The Ford Ranger PX2-PX3, Ford Raptor PX, Ford Everest PX, and Mazda BT-50 2018-2020 share a common interior dash configuration that allows the 4018-PH-S to fit across all variants under a single SKU. What is the difference between the 4018-PH-S and the 4017-PH-D for these vehicles? The 4018-PH-S is a phone-only holder. The 4017-PH-D includes both a phone position and a UHF handpiece position. If you also need to mount a UHF handpiece alongside your phone, the 4017-PH-D is the recommended option for these vehicles. Is this holder ADR compliant? Yes. The 4018-PH-S is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4018-PH-S is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less