Battery Accessories

250 products

  • VPN000100000

    Victron Energy Victron Energy VPN000100000 VE Net Control Panel

    Victron Energy VE Net Control Panel: The CANvu GX From Victron Energy Have Been Designed to Be a True Worldwide ProductThe VE.Net Panel provides a user interface to all connected VE.Net devices. This could be one or more VE.Net Battery Controllers, VE.Net Generator Modules, regular Victron Energy equipment such as inverters and the Multi Inverter/Charger combination, or other third party equipment.Victron Energy VPN000100000 Specifications: Maximum number of nodes: 128 Maximum cable length: 100 meter Network cable: Standard UTP with RJ-45 jacks Network type: Mixed (star and ring networks possible) Power supply voltage range: 9 – 35 V DC Current draw – standby: 3 mA at 12 volt Current draw – backlight off: 14 mA at 12 volt Current draw – backlight on: 26 mA at 12 volt Operating temp. range: 20 – +50°C (0 - 120°F) Potential free contact: 3A / 30 V DC / 250 V AC / (Normally Open) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $325.00

  • VBC000300000R

    Victron Energy Victron Energy VBC000300000R 12/24/48V VE Net Battery Controller (VBC)

    Victron Energy 12/24/48V VE Net Battery Controller (VBC): The Battery Controlller From Victron Energy Have Been Designed to Be a True Worldwide ProductThe VE.Net Battery Controller (VBC) is a device that monitors your battery status. It constantly measures the battery voltage, battery current, and battery temperature, and uses this information to calculate the state of charge of your battery.Victron Energy VBC000300000R Specifications: Battery capacity: Default value: 200 Ah Range: 20-65535 Step size: 5 Sync. voltage: Default value: 13.2 V Range: 10-72 Step size: 0.1 Sync. current: Default value: 4 % Range: 1-10 Step size: 1 Sync. time: Default value: 4 min Range: 1-4 Step size: 1 Battery temperature: Default value: 20 °C Range: 0-50 Step size: 1 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $367.00

  • TDR02130

    Thunder Thunder TDR02130 30A 8 Stage Pulse Battery Charger

    Reliable Workshop 30A Battery Charger Perfect for Large 12V Vehicles and Equipment Such as Trucks, Large Boats, Tractors, Agricultural Equipment and RVs Integrated 15A power supply allows the option of charging and powering equipment. Powerful 30A Battery Charger suitable for larger 12V equipment and vehicles. The 30 amp automatic battery charger is an efficient, water-resistant 8 stage charger, designed to charge most 12 volt GEL, AGM, Lead Acid and Calcium batteries. With a heavy duty design, it is suitable for 40-550Ah and 650Ah for maintenance (800 to 1,000CCA) making it ideal for workshops, garages and farm use. The fully automatic computer system includes an easy to read and comprehensive LED display and utilises pulse mode technology to reduce oxidation, maintain electrolyte consistency and combat stratification to provide longer battery life. Features: Input Voltage: 240VAC / 50HZ Type: 8 Stage Pulse Approval: CE, EMC, SAA and C-TICK Safety Protection: Over charging, reversing polarity (flashing LED), Short circuit and over temperature Minimum Start Voltage: ≤0 Volts Operating Temperature: -15°C – +50°C Display: Lights show stage of charge Ideally Suited Battery Ratings: 40-550Ah, 800-1,000CCA Specifications: Unit of Measure: Each Description: Battery Charger 30A Power Rating(Amp): 30 Voltage: 12 Charger/Analyser Type: Charger Charger Type: 8 Stage Ideal Battery Types: Gel, Calcium, AGM and Lead Acid Input Voltage: 240 VAC Legendary Products & Support From Authorized Dealers When you choose Thunder, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Thunder dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Thunder's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Thunder dealer today!

    $724.00

  • SKY024030100

    Victron Energy Victron Energy SKY024030100 Skylla 24/30(3) 120-240V Battery Charger

    Victron Energy Skylla 24/30(3) 120-240V Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide ProductSkylla-IP44 (1+1): two outputs to charge 2 battery banksThe Skylla-IP44 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.Skylla-IP44 (3): three full current outputs to charge 3 battery banksThe Skylla-IP44 (3) features 3 isolated outputs. All outputs can supply the full rated output current.IP44 protectionSteel epoxy powder coated case and splash proof. Withstands the rigors of an adverse environment: heat, humidity and salt air.Circuit boards are protected with an acrylic coating for maximum corrosion resistance.Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.LCD displayFor status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.CAN bus interface (NMEA2000)To connect to a CAN bus network, to a Skylla-i Control panel or to the Color Control digital display.Synchronised parallel operationSeveral chargers can be connected in parallel and synchronised with help of the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables.The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP44 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.Less maintenance and aging when the battery is not in use: the Storage modeThe Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.To increase battery life: temperature compensationEvery Skylla-IP44 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-IP44 is provided with a voltage sense facility so that the battery always receives the correct charge voltage.Use as a power supplyAs a result of the excellent control circuit, the Skylla-IP44 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger.Victron Energy SKY024030100 Specifications:Skylla-IP44 Input voltage (VAC): 120/230 V Input voltage range (VAC): 90-265 V Maximum AC input current @ 100 VAC: 10 A Frequency: 45-65 Hz Power factor: 0,98 Charge voltage 'absorption': 28,8 V Charge voltage 'float': 27,6 V Charge voltage ‘storage’: 26,4 V Charge current: 3 x 30 A Charge current starter batt. (A): n.a Charge algorithm: 7 stage adaptive Battery capacity: 150-300 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, not isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes (internal air circulation) Protection: Battery reverse polarity (fuse) Output short circuit Over temperature Operating temp. range: -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing): max 95% Enclosure: Material & Colour: steel (blue RAL 5012) Battery-connection: M6 bolts 230 VAC-connection: screw-clamp 6mm² (AWG 10) Protection category IP44 Weight: 6kg (14 lbs) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $1,388.00

  • SKY024030000

    Victron Energy Victron Energy SKY024030000 Skylla 24/30(1+1) 120-240V Battery Charger

    Victron Energy Skylla 24/30(1+1) 120-240V Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide ProductSkylla-IP44 (1+1): two outputs to charge 2 battery banksThe Skylla-IP44 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.Skylla-IP44 (3): three full current outputs to charge 3 battery banksThe Skylla-IP44 (3) features 3 isolated outputs. All outputs can supply the full rated output current.IP44 protectionSteel epoxy powder coated case and splash proof. Withstands the rigors of an adverse environment: heat, humidity and salt air.Circuit boards are protected with an acrylic coating for maximum corrosion resistance.Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.LCD displayFor status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.CAN bus interface (NMEA2000)To connect to a CAN bus network, to a Skylla-i Control panel or to the Color Control digital display.Synchronised parallel operationSeveral chargers can be connected in parallel and synchronised with help of the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables.The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP44 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.Less maintenance and aging when the battery is not in use: the Storage modeThe Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.To increase battery life: temperature compensationEvery Skylla-IP44 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-IP44 is provided with a voltage sense facility so that the battery always receives the correct charge voltage.Use as a power supplyAs a result of the excellent control circuit, the Skylla-IP44 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger.Victron Energy SKY024030000 Specifications:Skylla-IP44 Input voltage (VAC): 120/230 V Input voltage range (VAC): 90-265 V Maximum AC input current @ 100 VAC: 10 A Frequency: 45-65 Hz Power factor: 0,98 Charge voltage 'absorption': 28,8 V Charge voltage 'float': 27,6 V Charge voltage ‘storage’: 26,4 V Charge current: 30 A Charge current starter batt. (A): 3 A Charge algorithm: 7 stage adaptive Battery capacity: 150-300 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, not isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes (internal air circulation) Protection: Battery reverse polarity (fuse) Output short circuit Over temperature Operating temp. range: -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing): max 95% Enclosure: Material & Colour: steel (blue RAL 5012) Battery-connection: M6 bolts 230 VAC-connection: screw-clamp 6mm² (AWG 10) Protection category IP44 Weight: 6kg (14 lbs) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $1,260.00

  • SKY012060100

    Victron Energy Victron Energy SKY012060100 Skylla 12/60(3) 120-240V Battery Charger

    Victron Energy Skylla 12/60(3) 120-240V Battery Charger: The Skylla-i Battery Charger From Victron Energy Have Been Designed to Be a True World-wide ProductSkylla-IP44 (1+1): two outputs to charge 2 battery banksThe Skylla-IP44 (1+1) features 2 isolated outputs. The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.Skylla-IP44 (3): three full current outputs to charge 3 battery banksThe Skylla-IP44 (3) features 3 isolated outputs. All outputs can supply the full rated output current.IP44 protectionSteel epoxy powder coated case and splash proof. Withstands the rigors of an adverse environment: heat, humidity and salt air.Circuit boards are protected with an acrylic coating for maximum corrosion resistance.Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.LCD displayFor status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.CAN bus interface (NMEA2000)To connect to a CAN bus network, to a Skylla-i Control panel or to the Color Control digital display.Synchronised parallel operationSeveral chargers can be connected in parallel and synchronised with help of the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables.The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP44 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.Less maintenance and aging when the battery is not in use: the Storage modeThe Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.To increase battery life: temperature compensationEvery Skylla-IP44 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-IP44 is provided with a voltage sense facility so that the battery always receives the correct charge voltage.Use as a power supplyAs a result of the excellent control circuit, the Skylla-IP44 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger.Victron Energy SKY012060100 Specifications:Skylla-IP44 Input voltage (VAC): 120/230 V Input voltage range (VAC): 90-265 V Maximum AC input current @ 100 VAC: 10 A Frequency: 45-65 Hz Power factor: 0,98 Charge voltage 'absorption': 14,4 V Charge voltage 'float': 13,8 V Charge voltage ‘storage’: 13,2 V Charge current: 3 x 60A Charge current starter batt. (A): n.a Charge algorithm: 7 stage adaptive Battery capacity: 300-600 Ah Charge algorithm, Li-Ion: 3 stage, with on-off control or CAN bus control Temperature sensor: Yes Can be used as power supply: Yes Remote on-off port: Yes (can be connected to a Li-Ion BMS) CAN bus communication port (VE.Can): Two RJ45 connectors, NMEA2000 protocol, not isolated Synchronised parallel operation: Yes, with VE.Can Alarm relay DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC Forced cooling: Yes (internal air circulation) Protection: Battery reverse polarity (fuse) Output short circuit Over temperature Operating temp. range: -20 to 60°C (Full output current up to 40°C) Humidity (non-condensing): max 95% Enclosure: Material & Colour: steel (blue RAL 5012) Battery-connection: M6 bolts 230 VAC-connection: screw-clamp 6mm² (AWG 10) Protection category IP44 Weight: 6kg (14 lbs) Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $1,388.00

  • PIN241800500

    Victron Energy Victron Energy PIN241800500 24/800 Phoenix Inverter VE.Direct NEMA 5-15R

    The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide Product Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once on standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector. To transfer the load to another AC source: the automatic transfer switch For our low power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will. continue to operate without disruption. Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $447.00

  • PIN241800200

    Victron Energy Victron Energy PIN241800200 24/800 Phoenix Direct Schuko Pure Sinewave Inverter

    Victron Energy 24/800 Phoenix Direct Schuko Pure Sinewave Inverter: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide ProductProven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.Victron Energy PIN241800200 Features:Fully configurable Low voltage alarm trip and reset levels Low voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50Hz or 60Hz ECO mode on/off and ECO mode sense level Monitoring In- and output voltage and alarms Victron Energy PIN241800200 Specifications: Cont. power at 25°C: 800VA Cont. power at 25°C / 40°C: 650 / 560W Peak power: 1500W Output AC voltage / frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1% Input voltage range: 18,4 - 34,0 DC low shut down (adjustable): 18,6 Dynamic (load dependent) DC low shut down (fully configurable): Dynamic cut-off DC low restart and alarm (adjustable): 21,8 Battery charged detect (adjustable): 28,0 Max. efficiency: 91% Zero-load power: 9,5 Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable): 3,0 ECO mode stop and start power setting: Adjustable Protection: a - f Operating temperature range: -40 to +65°C (fan assisted cooling); Derate 1,25% per °C above 40°C Humidity (non-condensing): max 95% Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $447.00

  • PIN123750200

    Victron Energy Victron Energy PIN123750200 12/375 Phoenix Direct Schuko Inverter

    Victron Energy 12/375 Phoenix Direct Schuko Inverter: The Inverter Chargers From Victron Energy Have Been Designed to Be a True Worldwide ProductProven reliabilityThe full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.High start-up powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.ECO modeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.Remote on/offA remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.Victron Energy PIN123750200 Specifications:Fully configurable Low voltage alarm trip and reset levels Low voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50Hz or 60Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage and alarms Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $198.00

  • ORI241210060

    Victron Energy Victron Energy ORI241210060 120W IP67 24/12-10 Orion DC-DC Converter

    Victron Energy 120W IP67 24/12-10 Orion DC-DC Converter: The DC-DC Converter From Victron Energy Have Been Designed to Be a True World-wide ProductCompletely encapsulated: waterproof, shockproof and ignition protectedWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.Extra-long input and output cablesThanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.Wide input voltage rangeWith 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.Protected against overheatingIt can be used in a hot environment such as a machine room.Victron Energy ORI241210060 Specifications:Orion IP67 Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 20mA DC output voltage: 12V +/- 3% Maximum continuous output current: 10A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per °C above 40°C): -20 to +70°C (full rated output up to 40°C) Overload protection: Hiccup mode, recovers automatically after fault condition is removed Short circuit proof: Yes Protection against reverse polarity connection: With external fuse or circuit breaker (not included) Enclosure Material & Colour: Aluminium (blue RAL 5012) Protection category: IP67 DC connection: Two input and two output cables, length 1,8m Cable cross section, input: 1,5mm² (15 AWG) Cable cross section, output: 1,5mm² (15 AWG) Weight (kg): 300 g Dimensions (h x w x d in mm): 74 x 74 x 32 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $70.00

  • ORI241205060

    Victron Energy Victron Energy ORI241205060 60W 24/12-5 Orion IP67 DC-DC Converter

    Victron Energy 60W 24/12-5 Orion IP67 DC-DC Converter: The DC-DC Converter From Victron Energy Have Been Designed to Be a True World-wide ProductCompletely encapsulated: waterproof, shockproof and ignition protectedWater, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.Extra-long input and output cablesThanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.Wide input voltage rangeWith 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery.Protected against overheatingIt can be used in a hot environment such as a machine room.Victron Energy ORI241205060 Specifications:Orion IP67 Input voltage range: 15-40VDC Under voltage shutdown: 13V Under voltage restart: 14V No load current at 24V: 1mA DC output voltage: 12V +/- 3% Maximum continuous output current: 5A Efficiency: 93% Ripple & Noise: 75mV pp Operating temperature range (derate 3% per °C above 40°C): -20 to +70°C (full rated output up to 40°C) Overload protection: Hiccup mode, recovers automatically after fault condition is removed Short circuit proof: Yes Protection against reverse polarity connection: With external fuse or circuit breaker (not included) Enclosure Material & Colour: Aluminium (blue RAL 5012) Protection category: IP67 DC connection: Two input and two output cables, length 1,8m Cable cross section, input: 0,8mm² (18 AWG) Cable cross section, output: 0,8mm² (18 AWG) Weight (kg): 50 g Dimensions (h x w x d in mm): 25 x 43 x 20 Legendary Products & Support From Authorized Dealers When you choose Victron Energy, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Victron Energy dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Victron Energy's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Victron Energy dealer today!

    $43.00

  • Sale -6% M45

    CTEK CTEK M45 12V 3.6A Marine Battery Charger and Maintainer

    Marine Charger for Smaller Batteries - Perfect Choice for Jet Skis and Small Boats! CTEK M45 is the perfect choice for the marine market and boats with batteries from 1.2-120Ah, like jet skis and smaller boats. Unlike old battery chargers, CTEK chargers are designed with a focus on simplicity, safety and flexibility. Marine batteries need special care as they are put under a lot of pressure. The batteries need to recover quickly to satisfy the needs and comfort of the boat owner. Fully automatic CTEK M45 offers a fully automatic charging cycle, the charger takes its own readings and then begins to charge the battery, including pulse maintenance (arguably the most caring mode for a battery connected for a long time – patented system by CTEK) for best performance and service life. CTEK M45 can be connected for months, which is ideal when the boat is not in use and during the off season. Flexible for different battery needs CTEK M45 is specifically developed for different needs, boats and batteries. There is a choice between three different modes. The low-current mode (the jet ski icon) is perfect for smaller 12V batteries such as jet skies. The higher current mode (the boat icon) is for marine applications with batteries up to 120Ah. Finally, an additional AGM mode is specifically aimed at charging and maintenance of the Optima Red Top batteries and is also perfect for cold weather. No harmful galvanic currents The CTEK M45 produces no harmful galvanic currents that cause corrosion which quickly damages various metal components under the boat, including propellers and ladders. Counteracts sulphation Unused batteries lose their power and their life is shortened through sulfation. It is also more difficult to charge sulfated batteries. The CTEK M45 has a patented method for reconditioning sulfated batteries. The charger analyzes the state of the battery and, if possible, recovers the battery and its power. Compatible with the boats electronic equipment The marine environment is filled with GPS, navigation systems and other devices that are sensitive. Unlike less-sophisticated chargers, there is no need to disconnect the battery when charging as CTEK M45 is specially designed not to damage the electronic systems. Made for all weather conditions and situations The CTEK M45 is prepared to charge and maintain, no matter the weather, temperature or situation. The CTEK M45 is extremely robust and water and dust resistant (IP65 classification). The CTEK M45 is certified for use between –20ºC and +50ºC. In order to make things easier and more convenient, Comfort Connect (eyelet terminals) can be permanently connected to the boat battery. Designed for safety All CTEK models are designed to consider the safety of the user. They are spark free, making the connection much easier and safer considering the gases batteries normally produce. The CTEK M45 is also protected from reverse-polarity connections and is short-circuit proof. A red light on the charger will simply indicate that the charging cannot begin until the user has connected the charger correctly. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

    $149.00 $140.78

Footer image

© 2025 Frankies BrandBeast

    • Visa
    • Mastercard
    • American Express
    • Zip
    • PayPal

    Login

    Forgot your password?

    Don't have an account yet?
    Create account