CTEK CT5 TIME TO GO 12V Battery Charger and Maintainer: Features a Countdown Function to Know When the Battery Will Be ChargedGet your life back with the first battery charger in the world to show you exactly when your battery will be charged and ready to go.The groundbreaking CT5 TIME TO GO battery charger and maintainer is a world first because it answers the question ‚ÄòWhen will my battery be fully charged?' This means you can plan your day around your battery charging because the CT5 TIME TO GO gives you an accurate prediction of the remaining charging time in hours. Not only that, it'll also tell you when you can safely try to start your vehicle before the battery is fully charged. The CT5 TIME TO GO uses advanced technology to give you three charging and maintenance programs – Normal, AGM and Recond. It's easy to use and fully automatic, so it can be connected directly to the battery indefinitely, if required, and it won't over or under charge.CTEK CT5TTG Features: Practical and easy to use ‚ÄòTry' indicator shows when it's possible to make ONE start attempt Tests and restores battery capacity Normal program for medium sized lead acid batteries AGM program for medium sized lead acid AGM batteries Suitable for all types of 12V lead acid batteries Non sparking Reverse polarity protected Short circuit proof CTEK CT5TTG Specifications: Battery capacity 20–160 Ah Charging category AC charging Back current drain* Corresponding to less than 1.5 Ah/month Battery voltage 12 V Battery chemistry Lead acid Ambient operating temperature -20 °C to +50 °C Input 220–240 VAC, 50–60 Hz, 0.6 A Output 14.4/14.7/15.8 V, 5.0 A Battery types 12 V:; WET; MF; Ca/Ca; AGM; GEL Degree of protection IP65 Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK CT5 START/STOP: Auto Charger for Vehicles with Start & Stop FunctionThe CTEK CT5 START/STOP battery charger and maintainer has been specially designed to charge and maintain batteries in Start/Stop vehicles.Start/Stop technology is great for the environment but it can put a considerable strain on your battery, especially if it's in an older car. By keeping the battery fully charged, you can take full advantage of all the Start/Stop technology benefits, such as better fuel efficiency and lower CO2 emissions. If you only make short journeys, use the CT5 START/STOP once a month to keep your battery in peak condition. And if you're going away on holiday, just connect the charger to the battery to make sure your car's ready to go when you return.CTEK CT5 START/STOP Features: Non sparking CTEK CT5 START/STOP Specifications: Battery capacity 14–130 Ah Charging category AC charging Back current drain* Corresponding to less than 1.5 Ah/month Battery voltage 12 V Battery chemistry Lead acid Ambient operating temperature -20 °C to +50 °C Input 220–240 VAC, 50–60 Hz, 0.5 A Output 14.55 V, 3.8 A Battery types 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL Degree of protection IP65 Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK Panel Mounted Battery Check Indicator with M8 Eyelets 1.5m: Panel Mounted Battery Check Indicator with M8 Eyelets Specially designed for panel mounting, the INDICATOR – Panel uses a ‚Äòtraffic light' system to show the battery charge level. Connect your charger to the socket on the Panel, mount the Panel in a convenient place, and then route the cable to the battery. The Panel comes in two cable lengths to make charging easy, practical and convenient. INDICATOR – The panel uses a simple ‚Äòtraffic light' system to show the state of charge of your battery. Available in two cable lengths, 1.5 m and 3.3 m. No cables are included in the INDICATOR – Panel with flat pin connection. CTEK 56-380 Features: Eyelet: M8 (8.4mm) Cable Length: 1.5M Max Amperage: 10A Light Indication: Yes Fuse: 15 Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Our Best Value Fuses, Great Quality at Great Prices Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Highlights: FEATURES SPECIFICATIONS Highlights: FEATURES DESIGNED TO BOOST THE LOW VOLTAGE FOUND AT THE END OF LONG CABLE LENGTHS TO A USEABLE LEVEL SO YOUR AUXILIARY BATTERY CAN BE RECHARGED TO 100%. THREE (3) STAGE SMART CHARGING WHICH COMPRISES OF BOOST, ABSORPTION AND FLOAT ENSURE SIMPLE YET OPTIMAL CHARGING. THIS CHARGER RANGE HAS BEEN BUILT TOUGH FOR AUSTRALIAN CONDITIONS. RATED AT IP65, THE CHARGER IS RESISTANT TO DUST AND IS SPLASH/RAINPROOF. ELECTRONICALLY PROTECTED AGAINST USER ERROR, THE CHARGER WILL NOT DAMAGE VEHICLE ELECTRONICS. SHORT CIRCUIT AND REVERSE POLARITY PROTECTED. THIS CHARGER IS MICROPROCESSOR CONTROLLED TO PROTECT AGAINST OVERCHARGING THE AUXILIARY BATTERY AND ENSURES THE DONOR BATTERY IS NOT DISCHARGED BELOW 12.2 VOLTS. THIS WILL ENSURE THE DONOR BATTERY IS LEFT WITH ENOUGH VOLTAGE TO START THE VEHICLE. CHEMISTRY SELECTABLE: THE OPERATOR CAN SELECT THE APPROPRIATE SETTING TO MATCH THE SPECIFIC CHEMISTRY OF YOUR AUXILIARY BATTERY. GEL, CALCIUM OR AGM/DEEP CYCLE/SLA. THIS FEATURE, UNLIKE OTHER UNITS ON THE MARKET, ALLOWS YOU TO CHANGE CHEMISTRIES AT THE PUSH OF A BUTTON. ONCE SELECTED, THE CHARGER REMEMBERS THE CHEMISTRY SELECTED, NO MATTER WHAT HAPPENS, UNTIL THE OPERATOR SELECTS DIFFERENT CHEMISTRY. MICROCHIP MONITORING, MANAGEMENT AND CONTROL. ELECTRONIC TOUCH-BUTTON SELECTION. INBUILT OVERHEATING PROTECTION. INBUILT OVERCHARGE PROTECTION. CHARGER WILL AUTOMATICALLY REDUCE CURRENT (AMPS) AS REQUIRED TO OPTIMISE BATTERY CHARGING. THE CHARGER HAS BEEN DESIGNED TO RECOMMENCE CHARGING FROM FLOAT MODE WHEN A LOAD IS PLACED ON THE AUXILIARY BATTERY. I.E. IF AUXILIARY BATTERY IS FULLY CHARGED AND THE CHARGER IS IN FLOAT MODE, THE CHARGER WILL RECOMMENCE IT'S CHARGING CYCLE AUTOMATICALLY WHEN THE AUXILIARY BATTERY IS USED AGAIN. CAN BE USED WITH EITHER FIXED OR VARIABLE VOLTAGE ALTERNATORS (WITH OUTPUTS ABOVE 12.2 VOLTS) Legendary Products & Support From Authorized Dealers When you choose Matson, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Matson dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Matson's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Matson dealer today!

Read more less

Victron 120W 48/24-5A Orion-Tr Isolated DC-DC Converter: Designed to Be a True World-wide Product Remote on-off The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual). Adjustable output voltage: can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Input fuse (not replaceable) On 12V and 24V input models only Victron ORI482410110 Specifications: Input voltage range: 32-70V Under voltage shut down: 28V Under voltage restart: 30V Nominal output voltage: 24,2V Output voltage adjust range: 20-30V Output voltage tolerance: +/- 0,2V Output noise: 2mV rms Cont. output current at nominal output voltage and 25¬∞C: 5A Maximum output current (10 s) at nominal output voltage: 6,3A Short circuit output current: 25A Cont. output power at 25¬∞C: 120W Cont. output power at 40¬∞C: 100W Efficiency: 86% Off load current: < 60mA Galvanic isolation: 200V dc between input, output and case Operating temperature range: -20 to +55¬∞C (derate 3% per ¬∞C above 40¬∞C) Humidity: Max. 95% non-condensing DC connection: Screw terminals Maximum cable cross-section: 6 mm¬≤ AWG10 Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Victron Energy Orion IP67 24/12-20A Fully Encapsulated. Pre-Cabled. Built for Where Others Won't Go. Product Overview The Victron Energy Orion IP67 24/12-20A (ORI241220260) is a compact, fully encapsulated DC-DC step-down converter rated at 20 amps and 240 watts continuous, converting a 24V DC source to a regulated 12V DC output. Unlike conventional converter units housed in open-frame or vented enclosures, the ORI241220260 is constructed from cast aluminium with electronics moulded in resin completely sealed against water, oil, dirt, shock, and ignition hazards with no external enclosure required. What makes this unit stand out in practical installations is the combination of its IP67 encapsulation, extra-long 1.8-metre input and output cables, and a wide 15–40V input range. The pre-fitted cables eliminate the need for intermediate connections in the majority of installs an important reliability advantage in demanding environments where every additional junction is a potential failure point. The wide input range handles voltage fluctuations from a partially discharged 24V bank through surge conditions from other loads on the same circuit, maintaining stable 12V output throughout. Built-in overheating protection means the unit can be installed in confined, high-temperature locations machine rooms, engine bays, and underbonnet spaces without thermal cutout concerns under normal operating conditions. Key Specifications Part Number: ORI241220260 Converter Type: Non-isolated DC-DC step-down Input Voltage Range: 15–40V DC Output Voltage: 12V DC Output Current: 20A Output Power: 240W continuous IP Rating: IP67 — dustproof and waterproof to 1 metre depth Enclosure: Cast aluminium, electronics moulded in resin Cable Length: 1.8 metres (input and output) Ignition Protected: Yes Overheating Protection: Yes Isolation: Non-isolated (input and output negatives shared) Features & Benefits Completely Encapsulated Construction — Cast aluminium housing with resin-moulded internal electronics. Water, oil, and dirt cannot penetrate the unit. Shockproof and ignition-protected as standard — no separate enclosure, no IP-rated cabinet, no additional cost or complexity. This is the converter you specify when the environment is genuinely hostile. IP67 Weatherproof Rating — Fully dustproof (IP6x) and protected against water immersion between 15cm and 1 metre depth (IPx7). Suitable for direct mounting in bilges, underbonnet compartments, underfloor chassis locations, marine bulkheads, and outdoor plant equipment — locations where a standard IP20 converter would fail or require a protective housing. Ignition Protected — Safe for installation in environments where flammable vapours may be present — petrol engine bays, fuel storage areas, and marine bilges with petrol engines. A critical compliance and safety specification often overlooked in converter selection. 1.8-Metre Pre-Fitted Input and Output Cables — Factory-fitted cables of 1.8 metres eliminate intermediate connections in most installations. Every additional junction in a high-current DC circuit is a potential source of resistance, heat, and failure — particularly in environments subject to vibration, moisture, and temperature cycling. Fewer junctions means better reliability, lower voltage drop, and less installation labour. Wide Input Voltage Range: 15–40V DC — Broader than the standard 18–35V range found on many 24V converters, the 15–40V window handles aggressive voltage sags during heavy engine starting or high load events, and accommodates higher absorption/equalisation voltages from some charger and alternator types without triggering an over-voltage shutdown. Stable Output Through Input Fluctuations — The wide input range ensures the 12V output remains stable and regulated when other high-draw equipment on the same 24V bus causes voltage sags or surges — important in shared electrical systems on trucks, vessels, and plant equipment. Overheating Protection — Built-in thermal protection allows the unit to operate safely in hot environments including machine rooms, enclosed engine bays, and confined equipment spaces. The converter manages its own thermal limits without requiring external thermal management or ventilation clearance. Compact 240W Output — At 20A / 240W, the ORI241220260 is the right-sized solution for dedicated 12V accessory circuits, auxiliary loads, communications equipment, lighting circuits, and small battery top-up applications running off a 24V primary source — without the overspecification and cost of a 70A or 100A unit. Non-Isolated Design — Input and output negatives are shared, which is the appropriate and efficient topology for the majority of automotive, marine, and off-grid 24V-to-12V conversion applications where galvanic isolation is not required. Technical Specs Specification Detail Part Number ORI241220260 Converter Type Non-isolated DC-DC step-down Input Voltage Range 15–40V DC Output Voltage 12V DC Output Current 20A Output Power 240W continuous IP Rating IP67 IP67 — Dust Protection Dustproof (IP6x — fully sealed) IP67 — Water Protection Immersion to 1 metre depth (IPx7) Enclosure Material Cast aluminium Internal Construction Electronics moulded in resin Cable Length 1.8 metres (input and output, pre-fitted) Ignition Protected Yes Overheating Protection Yes Isolation Non-isolated (input/output negatives shared) Compatible With / Goes Well With Applications: 24V trucks and heavy vehicles powering 12V accessories, communications, or lighting Marine vessels — 24V primary bank to 12V electronics, navigation, or cabin loads (bilge-mount capable) Off-road and expedition vehicles requiring underbonnet or underfloor converter mounting Agricultural and mining equipment with exposed or confined mounting locations Plant and industrial equipment in machine room or engine bay environments Camper trailers towed by 24V vehicles requiring a compact 12V supply Complementary Victron Products: Victron SmartShunt or BMV-712 (battery monitoring) Victron Cerbo GX (system integration and remote monitoring) Victron MPPT Solar Charge Controllers (system pairing) Victron MultiPlus or Quattro inverter-chargers (system integration) Frequently Asked Questions Why does this converter come with 1.8-metre pre-fitted cables instead of terminals or connectors? In IP67 applications — bilges, underbonnet spaces, outdoor plant — every cable junction is a potential ingress point and failure risk. Pre-fitted 1.8-metre cables eliminate the need for intermediate connections in most installs, improving reliability and reducing installation time in the environments where this unit is most commonly used. What does ignition protection mean and do I need it for my installation? Ignition protection means the converter is safe for use in areas where flammable fuel vapours may be present — petrol engine bays, fuel storage compartments, and bilges on petrol-engine vessels. If your installation is in or near a fuel vapour risk zone, ignition protection is a safety and compliance requirement, not just a feature. What is the input voltage range and why is 15–40V wider than most 24V converters? The ORI241220260 operates across 15–40V DC — broader than the 18–35V range on many 24V converters. This accommodates aggressive voltage sags during engine starting or heavy load events at the low end, and higher absorption or equalisation voltages from certain chargers and alternators at the top end, without the converter dropping out or triggering over-voltage protection. Can this converter be mounted directly in a bilge or wet outdoor location? Yes. The IP67 rating and fully encapsulated cast aluminium construction make it suitable for direct mounting in bilges, wet bays, underfloor chassis locations, and outdoor plant environments where water immersion to one metre depth is a realistic scenario. No additional waterproof enclosure is required. Is the ORI241220260 suitable for a marine installation on a vessel with a petrol engine? The IP67 rating and ignition-protected construction make it physically and safety-qualified for this application. However, this is a non-isolated converter — input and output negatives are shared. On petrol-engine vessels where galvanic isolation may be required to prevent stray current corrosion, the Victron Orion-Tr Smart Isolated range should be evaluated as an alternative. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less