A Compact Yet Powerful 2-Channel Amplifier Designed to enhance your in-car audio experience, the powerful GM-A3702 gives you total installation freedom and very low distortion. With a one-body heat sink and gain adjustment of up to 6.5V, you can turn your in-car audio experience into the sound staging environment that you’re looking for. The GM-A3702 offers support for 2 Ohm and 4 Ohm speakers, and can produce up to 500 W of power when bridged. Growing Power, Shrinking SizeNew Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn OnPioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Features: 500 Watts Max Power Automatic signal sensing and Turn-ON Hi-Volt input level control Balanced isolator input circuit Specifications:General RCA Inputs: 2-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 25A x 1 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 246(W) X 60(H) X 180(D) mm Power Continuous Power (RMS) Output @ 1‚Ѷ: N/A Continuous Power (RMS) Output @ 2‚Ѷ: 95W x 2 Continuous Power (RMS) Output @ 4‚Ѷ: 60W x 2 Continuous Power (RMS) Output - Bridged @ 4‚Ѷ: 190W x 1 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: N/A Bass Boost Frequency: 50 Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz Total Harmonic Distortion (THD): <0.05 % Signal-to-Noise (SN) Ratio: >95 dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Pioneer GM-D8701: Amplify Your Audio Experience with the New Class-D Amplifier! An amplifier shouldn’t take up too much space, especially in your car. Pioneer GM-D8701 might just be what you’re looking for. It combines a 1-Ohm stable circuit, installation flexibility and a superior high-power output. Big Power, Small SizePioneer’s new extra-efficient Class-D digital amplifiers mark a dramatic improvement in power output capability, yet are 50% smaller than the current GM-Series Class-AB amplifiers. That makes them more versatile in terms of installation as well as performance. Improved Circuit DesignTo prevent circuit shutdown, Pioneer’s new digital amplifier circuit “Protection Control System” senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Ω connection. This design enhances the flexibility to connect multiple subwoofers to a system. Variable Low Pass FilterFor extra flexibility, variable LPF make audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The LPF is adjustable from 40 Hz to 240 Hz. Turn Up the BassEvery new Pioneer Class-D amplifier has a wired bass boost remote control for optimal bass level adjustment according to listening preferences and music characteristics. Speaker Level InputsWhat, you DON’T own a Pioneer head unit? Well, we won’t hold it against you. In fact we’ll even help you build onto your system. Speaker level inputs allow you to connect your OEM unit (or any unit that doesn’t have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you’ve got a Pioneer amp in your vehicle. Pioneer GM-D8701 Features: 1,600 Watts Max Power Compact Design for Versatile Installation Options Wired Bass Boost Remote and Variable Bass Control 1 Ω Stable Pioneer GM-D8701 Specifications: General RCA Inputs: MONO Amplifier Class: CLASS-D Hi-Res Certified: No Bridgeable: N/A Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 40A x 2 Bass Boost Remote: Yes Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 200 mV to 6.5 V Terminal Type: Block Load Impedance Allowance (Ohms): 1 to 8 Protection Control System: Yes Dimensions: 252mm (W) x 60mm (H) x 215mm (D) Power Continuous Power (RMS) Output @ 1Ω: 800W RMS x 1 Continuous Power (RMS) Output @ 2Ω: 500W RMS x 1 Continuous Power (RMS) Output @ 4Ω: 300W RMS x 1 Continuous Power (RMS) Output - Bridged @ 4Ω: N/A Audio Adjustments Low-Pass Crossover Frequency: 40 Hz Low-Pass Slope (dB/octave): -12dB High-Pass Crossover Frequency: N/A Bass Boost Frequency: 50 Hz Bass Boost Level: 0 dB to 18 dB Audio Specifications Frequency Response: 10 Hz to 240 Hz Total Harmonic Distortion (THD): < 0.5% (100 Hz) Signal-to-Noise (SN) Ratio: > 100 dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

Amplify Your Audio Experience with the New Class-D Amplifier! Pioneer’s new extra-efficient Class-D digital amplifiers mark a dramatic improvement in power output capability, yet are 50% smaller than the current GM-Series Class-AB amplifiers. That makes them more versatile in terms of installation as well as performance. Improved Circuit DesignTo prevent circuit shutdown, Pioneer’s new digital amplifier circuit “Protection Control System” senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Ω connection. This design enhances the flexibility to connect multiple subwoofers to a system. Variable Low Pass FilterFor extra flexibility, a variable LPF makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The LPF is adjustable from 40 Hz to 240 Hz. Turn Up the BassEvery new Pioneer Class-D amplifier has a wired bass boost remote control for optimal bass level adjustment according to listening preferences and music characteristics. Speaker Level InputsWhat, you DON’T own a Pioneer headunit? Well, we won’t hold it against you. In fact we’ll even help you build onto your system. Speaker level inputs allow you to connect your OEM unit (or any unit that doesn’t have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you’ve got a Pioneer amp in your vehicle. Pioneer GM-D9701 Features: 2,400 Watts Max Power Compact Design for Versatile Installation Options Wired Bass Boost Remote and Variable Bass Control 1 Ω Stable Pioneer GM-D9701 Specifications: General RCA Inputs: MONO Amplifier Class: CLASS-D Hi-Res Certified: No Bridgeable: N/A Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 40A x 2 Bass Boost Remote: Yes Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 200 mV to 6.5 V Terminal Type: Block Load Impedance Allowance (Ohms): 1 to 8 Protection Control System: Yes Dimensions: 252mm (W) x 60mm (H) x 215mm (D) Power Continuous Power (RMS) Output @ 1Ω: 1200W RMS x 1 Continuous Power (RMS) Output @ 2Ω: 800W RMS x 1 Continuous Power (RMS) Output @ 4Ω: 500W RMS x 1 Continuous Power (RMS) Output - Bridged @ 4Ω: N/A Audio Adjustments Low-Pass Crossover Frequency: 40 Hz Low-Pass Slope (dB/octave): -12dB High-Pass Crossover Frequency: N/A Bass Boost Frequency: 50 Hz Bass Boost Level: 0 dB to 18 dB Audio Specifications Frequency Response: 10 Hz to 240 Hz Total Harmonic Distortion (THD): < 0.5% (100 Hz) Signal-to-Noise (SN) Ratio: > 100 dB Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Amplify Your Audio Experience with the New Class-D Amplifier! The Pioneer GM-D9705 is your ‚Äúall-in-one‚Äù solution when looking for additional power. With a compact footprint, speaker line input (and signal sensing turn-on), remote bass control all powered by a ‚ÄúClass-D‚Äù amplifier you have the power in your hands! Packs a PunchThe 5-channel amplifier is rated at 2000 watts max with the A and B channels rated at 75 watts x 4 (RMS) and the subwoofer output rated at 600 watts at 2 (RMS). Compared to similarly priced multichannel amplifiers, the variable crossover networks on the GM-D9705 offer increased flexibility and give listeners more control. Block terminals for a cleaner installation and direct wire contact minimizing resistance. Variable Low Pass FilterFor extra flexibility, a variable LPF makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The LPF is adjustable from 40 Hz to 240 Hz.Turn Up the BassThe GM-D9705 also features a Bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics. Speaker Level InputsWhat, you DON'T own a Pioneer head unit? Well, we won't hold it against you. In fact we'll even help you build onto your system. Speaker level inputs allow simplify integration into existing aftermarket or factory installed (OEM) integrated entertainment systems so you can connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle. Improved Circuit DesignTo prevent circuit shutdown, Pioneer's new digital amplifier circuit ‚ÄúProtection Control System‚Äù senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Œ© connection. This design enhances the flexibility to connect multiple subwoofers to a system.   Features: 2,000 Watts Max Power Block Terminal Variable High Pass and Low Pass Filters Equipped with A/B-SW Input Select Specifications: General RCA Inputs: 5-CH Amplifier Class: CLASS-D Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 30A x 3 Bass Boost Remote: Yes Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 200 mV to 6.5 V Terminal Type: Block Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 302mm (W) x 60mm (H) x 215mm (D) Power Continuous Power (RMS) Output @ 1‚Ѷ: N/A Continuous Power (RMS) Output @ 2‚Ѷ: 100W x 4 (Main channel), 600W x 1 (Subwoofer channel) Continuous Power (RMS) Output @ 4‚Ѷ: 75W x 4 (Main channel), 350W x 1 (Subwoofer channel) Continuous Power (RMS) Output - Bridged @ 4‚Ѷ: 200W x 2 (Main channel), 350W x 1 (Subwoofer channel) Audio Adjustments Low-Pass Crossover Frequency: 40 Hz Low-Pass Slope (dB/octave): -12dB/oct (A/B CH) / -12dB/-24dB (SUB CH) High-Pass Crossover Frequency: 500 Hz Bass Boost Frequency: 50 Hz Bass Boost Level: 0 dB to 18 dB Audio Specifications Frequency Response: A/B CH: 10 Hz ~ 50 kHz (+0dB, -3dB) / SUB CH: 10Hz ~ 500 Hz (+0dB, -3dB) Total Harmonic Distortion (THD): A/B CH: <0.05% (1kHz) / SUB CH: <0.05% (100Hz) Signal-to-Noise (SN) Ratio: > 94dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!

Read more less

The Perfect Balance Between Power & Performance! 8AWG 2-Channel Amp Power Install KitAerpro Maxcor: Represents the perfect balance between power and performance. MX28 8AWG 2-channel Amp Power Install Kit delivers up to 600W to your amplifier, ideal for installing a monoblock or 2-channel amplifier, and includes high-quality RCA cables for superior signal strength. Our soft touch super flex (STSF) cables allow easier installation without compromising power and include high-quality components. These include a 6-metre 8AWG power cable, 0.8-metre 8AWG Earth cable, 5-metre 20AWG trigger cable, 60A ANL fuse and fuse holder, 2-channel 5-metre RCAs, cable ties, and all required professional fitting terminals. MX28 also includes a 4-metre 16AWG speaker cable, as well. Aerpro MX28 Features: Suits 2-Channel or Monoblock Amplifiers 600W Max Power American Wire Gauge Standard (AWG) 8AWG TCA Soft Touch Super Flex Power Cable 5M Twisted Gold-Plated RCA Connectors 60A ANL Fuse With Holder 8AWG Grommet Black Weaved Tubing Comes With 4-metre 16AWG Speaker Cable Aerpro MX28 Specifications: Amp Suitability: Monoblock or 2-Channel Maximum Power: 600W Power Cable: Colour: Blue (Power) / White (Earth) Length: 6M (Power) / 0.8M (Earth) Gauge: 8AWG Type: TCA Insulation: Flexible PVC Outer Diameter: 6.5mm Stand Size: 0.12mm Number of Stands: 735 Trigger Cable: 20AWG Orange 5M RCAs: 5M 2-Channel Speaker Cable: 4M 16AWG Fuse: ANL Holder With 60A Fuse Weight: 1.50kg Inclusions: 6M Blue 8AWG Power Cable With O-Ring Terminal 0.8M White 8AWG Earth Cable 60A ANL Fuse With Holder 5M 2-Channel RCA Leads 4M 16AWG Speaker Cable 5M 20AWG Orange Trigger Wire Black Weaved Tubing Fitted to Power Cable Hex Key For Fuse Holder 8AWG Wiring Grommet Cable Ties All Required Terminals Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Perfect Balance Between Power & Performance! 2AWG Amp Power Install Kit Aerpro Maxcor: Represents the perfect balance between power and performance. The MX02 2AWG Amp Power Install Kit delivers up to 1500W of serious power and meets AWG Standards. Ideally used to power multiple amplifiers up to 1500W in total and includes a distribution block. The MAXCOR soft touch super flex (STSF) cables allow easier installation without compromising power. These include a 5.5-metre 2AWG power cable, 0.8-metre 2AWG Earth cable, 5-metre 20AWG trigger cable, 180A ANL fuse and fuse holder, cable ties and all required professional fitting terminals. Please Note: RCA and speaker wire are NOT included in the Power Kit. Features: Suits Monoblock, 2-Channel or 4-Channel Amplifier 1500W Max Power American Wire Gauge Standards (AWG) 2AWG TCA Soft Touch Super Flex Power Cable Hex key for the distribution block 2AWG Grommet 180A ANL Fuse and Fuse Holder Distribution Block (1x 2AWG In - 2 x 4AWG Out) Specifications: Amp Suitability: Monoblock / 2-Channel / 4-Channel Maximum Power: 1500W Power Cable: Colour: Blue (Power) / White (Earth) Length: 5.5M (Power) / 0.8M (Earth) Gauge: 2AWG Type: TCA Insulation: Flexible PVC Outer Diameter: 12mm Stand Size: 0.12mm Stands Number: 2989 Trigger Cable: 20AWG Orange 5M RCA's: Not Included Speaker: Not Included Fuse: ANL Holder With 180A Fuse Weight: 1.60kg Kit Inclusions: 5.5M Blue 2AWG Power Cable With O-Ring Terminal 0.8M White 2AWG Earth Cable 180A ANL Fuse With Holder 5M 20AWG Orange Trigger Wire Black Weaved Tubing Fitted to Power Cable Distribution Block 1x 2AWG In - 2x 4AWG Out Hex Key For Fuse Holder 2AWG Wiring Grommet Cable Ties All Required Terminals Legendary Products & Support From Authorized Dealers When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Aerpro dealer today!

Read more less

Rockford Fosgate R2-300X4 Prime 300 Watt 4-Channel Class D Amplifier When four speakers need real power without compromise, the R2-300X4 delivers 300 watts of clean, efficient Class D performance engineered by Rockford Fosgate. Product Overview The R2-300X4 is part of Rockford Fosgate's 3rd generation Prime Series, built for car audio enthusiasts who demand reliable, high-performance amplification at an accessible price. Operating as a full-range Class D 4-channel amplifier, it runs at 4 ohm or 2 ohm stereo and 4 ohm bridged/mono, giving it the flexibility to drive front and rear speaker pairs or reconfigure as a 3-channel or 2-channel setup. Class D topology maximises efficiency and reduces the electrical load on the vehicle's charging system, while MEHSA 4 (Maximum Efficiency Heat Sink Application) actively reduces MOSFET temperatures, lowers distortion, and prolongs output device lifespan. The top-mounted control panel provides independent front and rear controls within easy reach, and CTA-2006 compliant power ratings confirm that the 300W output is a real, tested figure. Designed and engineered in Tempe, Arizona, the R2-300X4 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red for both front and rear) to accurately match the source unit's output to the amplifier's input sensitivity, eliminating guesswork and reducing distortion at the source. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. MEHSA 4 (Maximum Efficiency Heat Sink Application): An advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained use. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's outputs and protects against shorting speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. Fully Adjustable Butterworth Crossovers: Independent front and rear 12 dB/octave High-Pass and Low-Pass crossovers, continuously variable from 50 to 250 Hz, with an All-Pass option per channel for full-range output when no filtering is needed. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V) through a 2/4 Channel Input Selection Switch, making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing downstream amplifiers to be added without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-300X4 Series Prime Number of Channels 4 Amplifier Class Class D, Full Range Total RMS Power 300W RMS Power @ 4 Ohm 50W x 4 RMS Power @ 2 Ohm 75W x 4 Bridged Power @ 4 Ohm 150W x 2 Dynamic Power @ 4 Ohm 70W x 4 Dynamic Power @ 2 Ohm 115W x 4 Dynamic Power Bridged @ 4 Ohm 230W x 2 Bridgeable Yes Minimum Impedance (Stereo) 2 Ohm Minimum Impedance (Bridged) 4 Ohm Frequency Response 20 Hz - 20 kHz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input (Front) 4 x RCA low-level, 4-Pin Molex high-level Signal Input (Rear) 4 x RCA low-level, 4-Pin Molex high-level Input Switch 2/4 Channel (RCA and high-level compatible) Signal Output 2 x RCA pass-through (active with RCA or high-level input) Crossover (Front and Rear) High-Pass / Low-Pass: 50-250 Hz @ 12 dB/octave Butterworth All-Pass Yes Tone Controls No Remote Controls No Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT Front (Blue/Red), C.L.E.A.N. OUT Rear (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 39A Recommended Fuse 60A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 10.1" (4.9 cm x 17.3 cm x 25.5 cm) Weight 4.75 lbs (2.15 kg) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-300X4 pairs naturally with Rockford Fosgate Prime Series full-range speakers such as the R165X3, R168X2, R169X2, and R169X3 for a matched front and rear speaker setup. For systems requiring low-end support, the rear channels bridge cleanly to drive a single Prime R1 subwoofer such as the R1S410 or R1S412, with the rear crossover set to Low-Pass. A 4-gauge amplifier wiring kit is required for power and ground runs, and 8-gauge cable is needed for speaker outputs. A quality 4-channel RCA interconnect is recommended for clean signal transfer from the head unit. Frequently Asked Questions Can the R2-300X4 be used to power both speakers and a subwoofer in the same system? Yes. The R2-300X4 supports 3-channel configuration, where the front channels power a pair of full-range speakers and the rear channels are bridged to drive a single subwoofer. Setting the rear crossover to Low-Pass rolls off high frequencies to the sub. The minimum impedance of any bridged channel is 4 ohms, so confirm subwoofer impedance before bridging. Does the R2-300X4 require a remote turn-on wire? When using RCA inputs, a remote turn-on wire must be connected to the head unit's remote output. When using high-level speaker inputs, the Auto-Sense bypass switch can be enabled to allow the amplifier to detect an incoming signal and power on automatically, making it compatible with factory head units and systems that lack a dedicated remote output, including those with Retained Accessory Power (RAP). What does the NOMAD protection system do? NOMAD is a real-time analogue computer built into the R2-300X4 that continuously monitors the amplifier's speaker outputs. It protects the amplifier from damage caused by shorted speaker wires and dangerously low speaker impedances, providing active, dynamic protection rather than relying solely on a fuse. What gauge power, ground, and speaker wire does the R2-300X4 require? Rockford Fosgate specifies 4 AWG for power and ground runs using the included compression terminal block connectors. Speaker output connections use 8 AWG wire. The recommended 60A fuse is not included in the box and must be sourced separately, installed as close to the battery as possible. Can the R2-300X4 be bridged into a 2-ohm load for maximum power? No. When bridging the R2-300X4, the minimum supported impedance per bridged output is 4 ohms. Running a bridged channel into a 2-ohm load is not supported and risks amplifier failure or NOMAD-triggered protection shutdown. In standard stereo mode, the minimum impedance per channel is 2 ohms.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Rockford Fosgate R2-1200X1 Prime 1200 Watt Mono Class D Amplifier When your subwoofer demands serious power, the R2-1200X1 delivers 1200 watts of efficient Class D performance with the tuning tools to control every dimension of your bass. Product Overview The R2-1200X1 is part of Rockford Fosgate's 3rd generation Prime Series, developed for car audio enthusiasts who want a high-output monoblock amplifier without stepping beyond an accessible price point. Rated at 1200 watts RMS into 1 ohm, it operates as a Class D monoblock designed specifically for subwoofer duty, with a frequency response limited to 20-250 Hz and support for 4 ohm, 2 ohm, and 1 ohm mono configurations. This 1-ohm stability makes it compatible with a wide range of dual voice coil subwoofer wiring options. Beyond raw power, the R2-1200X1 is equipped with an integrated Punch EQ for up to 18 dB of bass boost at 45 Hz, a variable Infrasonic Filter to protect the subwoofer from damaging subsonic frequencies, and an included RLC Remote Level Control for convenient bass adjustment from the driver's seat. MEHSA 4 thermal management and Rollback Protection ensure sustained reliability under high-demand conditions, while NOMAD actively monitors outputs against shorts and impedance faults. Greater than 80% average efficiency means lower current draw relative to output, reducing the electrical burden on the vehicle's charging system. Designed and engineered in Tempe, Arizona, the R2-1200X1 is built by fanatics, for fanatics. Features & Benefits C.L.E.A.N. Technology (Patent 8,712,066): Rockford Fosgate's patented Calibrated Level Eliminates Audible Noise circuit uses dedicated input and output clip LEDs (C.L.E.A.N. IN Red, C.L.E.A.N. OUT Blue/Red) to accurately match the source unit's output to the amplifier's input sensitivity, removing distortion before it reaches the subwoofer. P.O.W.E.R. Supply: Onboard power supply design that continues to generate output above the rated RMS figure as vehicle voltage increases, so real-world performance scales beyond the spec sheet across the 9-16V operating range. Integrated Punch EQ: Continuously variable onboard bass equaliser providing 0 to +18 dB of boost at 45 Hz, correcting for acoustic deficiencies in the listening environment and delivering up to 3x the perceived bass without an external processor. Variable Infrasonic Filter: Adjustable high-pass filter operating from 15 to 40 Hz at 12 dB/octave Butterworth, removing subsonic frequencies that cause excessive cone excursion and voice coil stress without contributing audible bass output. MEHSA 4 (Maximum Efficiency Heat Sink Application): Advanced thermal management system that reduces MOSFET operating temperatures, lowers distortion levels, increases overall durability, and extends the lifespan of output devices under sustained high-power use. Rollback Protection: During demanding musical conditions, the amplifier dynamically reduces power demand to prevent stress on output devices, preserving both the amplifier and the connected subwoofer under real-world listening conditions. NOMAD Protection: A real-time analogue computer that continuously monitors the amplifier's speaker output and protects against shorted speaker wires and dangerously low speaker impedances, providing active fault management rather than passive fusing alone. Balanced Differential Inputs: Differential input topology eliminates noise picked up by signal cables between the source unit and amplifier, delivering a cleaner signal into the amplifier stage. 1-Ohm Stable Operation: Supports 4 ohm, 2 ohm, and 1 ohm mono loads, giving full compatibility with dual voice coil subwoofers wired to 1 ohm and maximising available output power for high-excursion applications. Includes RLC Remote Level Control: A remote level control is included in the box, allowing bass output to be adjusted from the driver's seat without accessing the amplifier directly. High Level Input Capable: Accepts both low-level RCA (150mV-4V) and high-level speaker signals (450mV-12V), making integration with factory head units straightforward. Auto-Sense RAP Bypass: Auto-Sense bypass switch supports vehicles with Retained Accessory Power (RAP), allowing the amplifier to power on and off correctly using speaker-level signal detection without requiring a dedicated remote turn-on wire. RCA Pass-Through Outputs: 2-channel RCA pass-through remains active with both RCA and high-level inputs, allowing a full-range amplifier to be added downstream without splitting cables at the head unit. CTA-2006 and CE Compliant: All power ratings verified at 14.4V with 1% or less THD to CTA-2006 industry standards, with no inflated peak figures used anywhere in the specifications. Technical Specs Specification Detail SKU R2-1200X1 Series Prime Number of Channels 1 Amplifier Class Class D Total RMS Power 1200W RMS Power @ 4 Ohm 400W x 1 RMS Power @ 2 Ohm 800W x 1 RMS Power @ 1 Ohm 1200W x 1 Dynamic Power @ 4 Ohm 489W x 1 Dynamic Power @ 2 Ohm 889W x 1 Dynamic Power @ 1 Ohm 1389W x 1 Bridgeable No Minimum Impedance 1 Ohm Frequency Response 20 Hz - 250 Hz THD @ 4 Ohm <1.0% THD @ 2 Ohm <1.0% THD @ 1 Ohm <1.0% Average Efficiency >80% Input Sensitivity (Low-Level) 150 mV - 4V Input Sensitivity (High-Level) 450 mV - 12V Signal Input 2 x RCA low-level, 4-Pin Molex high-level Signal Output 2 x RCA pass-through (active with RCA or high-level input) Punch EQ 0 to +18 dB @ 45 Hz Low-Pass Crossover 50-250 Hz @ 12 dB/octave Butterworth Infrasonic Filter 15-40 Hz @ 12 dB/octave Butterworth Remote Controls Yes (RLC Remote Level Control included) Visual Indicators POWER (Blue), PROTECT (Red), C.L.E.A.N. IN (Red), C.L.E.A.N. OUT (Blue/Red) Operating Voltage 9-16V DC Max Current Draw (13.8V Sinewave) 121A Recommended Fuse 200A (not included) Power Wire Gauge 4 AWG Speaker Wire Gauge 8 AWG Power Input Connector Compression Terminal Block Speaker Output Connector Compression Terminal Block Cooling Convection / Heatsink (MEHSA 4) Dimensions (H x W x D) 1.9" x 6.8" x 11.3" (4.9 cm x 17.3 cm x 28.5 cm) Warranty 1 Year Compliance CTA-2006, CE Goes Well With The R2-1200X1 is built to drive Rockford Fosgate Prime R2 and Punch P2 subwoofers hard, including the R2D2-12, R2D4-12, P2D2-12, and P2D4-12, with dual voice coil variants wiring cleanly to the 1-ohm or 2-ohm load the amplifier handles most efficiently. A high-current amplifier wiring kit is essential given the 121A maximum current draw, with 4-gauge power and ground cable as the minimum specification. A quality pair of RCA interconnects is recommended for clean signal transfer from the head unit. For systems requiring speaker channel amplification alongside this monoblock, the R2-1200X1 pairs directly with the R2-300X4 or R2-200X2 using the onboard RCA pass-through output. Frequently Asked Questions What subwoofer impedance works best with the R2-1200X1? The R2-1200X1 delivers its full rated 1200 watts RMS into a 1-ohm mono load, making it best suited to dual voice coil subwoofers wired in parallel to reach 1 ohm. It also operates at 800 watts into 2 ohms and 400 watts into 4 ohms, giving flexibility across a wide range of subwoofer configurations. Confirm the final wired impedance of the subwoofer before connecting to avoid operating below the 1-ohm minimum. What does the Infrasonic Filter do, and why does it matter at 1200 watts? The variable Infrasonic Filter removes subsonic frequencies below 15-40 Hz (adjustable) that are inaudible to the human ear but cause extreme cone excursion and voice coil stress, particularly at high power. At 1200 watts, uncontrolled subsonic content can quickly exceed a subwoofer's mechanical limits. Setting the Infrasonic Filter correctly protects the subwoofer and allows the amplifier to focus its full output within the audible bass range. Does the R2-1200X1 include a remote bass control? Yes. An RLC Remote Level Control is included in the box. It connects to the remote level control input on the amplifier and allows the driver to adjust bass output from a convenient dash-mounted position without accessing the amplifier directly, which is especially practical when the amplifier is installed in a boot or under a seat. What does Rollback Protection do at high power levels? During sustained high-demand listening conditions, Rollback Protection dynamically reduces the amplifier's power output to prevent thermal stress on the output devices. Rather than triggering a full protection shutdown, it maintains audio playback at a reduced level, protecting both the amplifier and the connected subwoofer while keeping the system running. What wiring is required for the R2-1200X1, and is the fuse included? The R2-1200X1 requires 4 AWG power and ground wire using the onboard compression terminal block connectors and 8 AWG speaker wire for the subwoofer output. The recommended 200A fuse is not included in the box and must be sourced separately. Given the 121A maximum current draw, the fuse must be installed in the power cable as close to the battery as possible to protect the vehicle's wiring. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

A Combination of Great Design and Massive Power The GM-A4704 amplifier gives you total installation freedom and no distortion. With a one-body heat sink and gain adjustment of up to 6.5V, you can turn your in-car audio experience into the sound staging environment that you’re looking for. This 4-channel amp allows you to drive multiple speakers and subwoofers, it’s also bridgeable to power a single sub. Variable High Pass Filter Variable HPF (high pass filter) allow for adjustable frequency from 40 Hz to 500 Hz* and greater car audio system flexibility according to subwoofer characteristics and personal listening preference. Growing Power, Shrinking Size New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins. Automatic Signal Sensing & Turn On Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level. Pioneer GM-A4704 Specifications: General RCA Inputs: 4-CH Amplifier Class: Class AB Hi-Res Certified: No Bridgeable: Yes Warranty: 1 Year Speaker Level Input: Yes Fuse Rating: 30A x 1 Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in) Terminal Type: Screw Load Impedance Allowance (Ohms): 2 to 4 Protection Control System: Yes Dimensions: 326(W) X 60(H) X 215(D) mm Power Continuous Power (RMS) Output @ 1Ω: N/A Continuous Power (RMS) Output @ 2Ω: 65W x 4 Continuous Power (RMS) Output @ 4Ω: 40W x 4 Continuous Power (RMS) Output - Bridged @ 4Ω: 130W x 2 Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12db/oct (A/B CH) High-Pass Crossover Frequency: 40 Hz to 500 Hz Bass Boost Frequency: 50Hz Bass Boost Level: 0/6/12dB Audio Specifications Frequency Response: 10Hz ~ 70kHz (+0dB , -3dB) Total Harmonic Distortion (THD): <0.05% ( 10W, 1kHz) Signal-to-Noise (SN) Ratio: > 94dB Legendary Products & Support From Authorized Dealers When you choose Pioneer, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized Pioneer dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by Pioneer's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized Pioneer dealer today!  

Read more less

Powerful Sound, Compact Design – Upgrade Your Ride with the Pioneer GM-DX104 Hi-Res Amplifier! When you're in the need of an ultra-compact, premium quality amplifier, look no further! The Pioneer GM-DX104 is Hi-Res Audio certified, has a LPF/HPF built-in, high-level and low-level inputs and has a 4 x 45W Nom. output. The perfect way to upgrade your factory audio system partnered with some premium speakers! “HI-RES” AUDIO CERTIFIEDPioneer’s new GM-DX874 Class-D digital amplifier is equipped with high quality sound components and tuning and is compatible with “Hi-Resolution” audio allowing simply the highest quality sound reproduction! The perfect partner to Pioneer’s exclusive speaker range, TS-Z Series!*The product with Hi-Res AUDIO logo is conformed to High-Resolution Audio standard defined by Japan Audio Society. The logo is used under license from Japan Audio Society. SMALL BUT POWERFULIt may be small but don’t let the size fool you. The GM-XD104 is capable of delivering up to 400 Watts of maximum output and is more than comfortable providing 45 Watts of power per channel, that’s more than enough to improve the performance of your factory or aftermarket speakers. INSTALL FLEXABILITYToday more and more music lovers are taking their music off-road and finding ways to enjoy their music recreationally. With the GM-DX104 you can add great sound to your motorcycle, ATV, or boat where a conventional size amplifier may not fit. FLEXIBLE CONNECTIVITYFor DIYers, the GM-D1004 amplifier is not only small and powerful but it’s easy to install. Simply connect power and ground at the radio and get more installation flexibility using hi-level or low-level inputs with a signal sensing remote turn on so you can use it in combination with a factory or aftermarket headunit. Pioneer GM-DX104 Features: Hi-Res Audio Certified 400 Watts Max Power Compact Design for Versatile Installation Options Refined Class-D Design Offers Extreme Efficiency and High-Quality Sound Pioneer GM-DX104 Specifications: General RCA Inputs: 4-CH Amplifier Class: Class-D Hi-Res Certified: Yes Bridgeable: Yes Warranty: 12 Month Speaker Level Input: Yes Fuse Rating: 15A Bass Boost Remote: No Automatic Signal Sensing and Turn-On: Yes Hi-Volt Input Level Control: Yes Terminal Type: Removable Harness Load Impedance Allowance (Ohms): 2Ω to 8Ω Protection Control System: Yes Dimensions: 181mm(W) x 38mm(H) x 64mm(D) Power Continuous Power (RMS) Output @ 1Ω: N/A Continuous Power (RMS) Output @ 2Ω: 45W x 4 Continuous Power (RMS) Output @ 4Ω: 45W x 4 Continuous Power (RMS) Output – Bridged @ 4Ω: 90W x 1 (3ch) Audio Adjustments Low-Pass Crossover Frequency: 80 Hz Low-Pass Slope (dB/octave): -12 dB/oct High-Pass Crossover Frequency: 80 Hz Bass Boost Frequency: N/A Bass Boost Level: N/A Audio Specifications Frequency Response: 10 Hz to 40 kHz Total Harmonic Distortion (THD): 0.05% Signal-to-Noise (SN) Ratio: 93 dB Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

8-Channel Car Amplifier with Digital Signal Processing from JBL!The JBL Audio DSP4086 is one of the best ways to get superior sound fidelity in your car. JBL's incredibly compact DSP4086 8-channel amp/processor will do both, providing eight channels of 40 watts RMS while sculpting the sound with powerful tuning software using your Windows PC.Connecting to the whole systemThe DSP4086 was designed to take the signals from your vehicle's front speakers, rear speakers, front center channel, and rear subwoofer. You can then process those signals to create eight powered outputs, and you have the ability to power and control your front tweeters.TuningEvery channel features 31-band EQ, switchable from parametric to graphic; completely variable high-, low-, and band-pass filters with selectable slopes; time delay, up to 12ms in 0.2ms increments; and 0/180¬∞ phase adjustment. You can assign each input to an output, and you can sum signals in order to create a full-range signal to be processed.Features: 8-channel car amplifier with digital signal processing 40 watts RMS x 8 at 4 ohms 60 watts RMS x 8 at 2 ohms DSP and EQ tuning tool adjustments made via USB connection to a Windows PC Save up to 10 presets Inputs: 6 assignable preamp and speaker-level (RCA adapters included) Outputs: 8 powered and processed Adjustment Details 31-band EQ (selectable parametric or graphic) Adjustable high-, low-, and band-pass filters (20-20,000 Hz) Selectable filter slopes 6, 12, 18, 24, 30, 36, 42, 48 dB/octave) Adjustable delay: 0 to 12ms in 0.2ms increments Phase adjustment: 0 or 180¬∞ Programming done by a Windows-run PC Other Features Includes wired remote for ch 7/8 Fuse rating: 40A x 1 Wiring and hardware not included with amplifier 8-gauge power and ground leads recommended Dimensions: 5-11/16‚Ä≥W x 2‚Ä≥H x 9-3/8‚Ä≥D What's in the Box: 8-Channel DSP amplifier w/ attached 6‚Ä≥ 6-RCA input harness Remote bass level control 16.5‚Ä≤ Remote level control cable (RJ-12 connectors both ends) 8‚Ä≥ Power/ground/Rem harness (inline 40A ATO fuse) 8‚Ä≥ 16-Pin speaker output harness 70‚Ä≥ USB Cable (type-A both ends / 2.0) 6 Input adapters (RCA to set-screw) Spare 40A ATO fuse Four 15mm screws Two 10mm screws 4 Large flat-washers 4 Small flat-washers 4 Lock-washers Four 6-1/2‚Ä≥ wire ties Owner's manual (Eng/Span/Fren/Others) Legendary Products & Support From Authorized Dealers When you choose JBL, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JBL dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JBL's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JBL dealer today!

Read more less

Small chassis. Full range. Punch power for sub or centre channel builds. Product Overview The Rockford Fosgate P300X1 is a 300W mono amplifier from the Punch series, built around a compact chassis capable of fitting where conventional amplifiers cannot. Unlike dedicated subwoofer-only mono amplifiers, the P300X1 features a full-range frequency response making it equally suited to powering a dedicated subwoofer system or a single centre channel speaker. Whether you're running one driver or multiple speakers off a single channel, the 2-ohm capable design delivers 300W of Punch-series output with headroom to spare. The P300X1 is a feature-rich unit for its class. The built-in C.L.E.A.N. setup system simplifies gain calibration, reducing the risk of clipping and distortion from a poorly set amplifier. High-level inputs with an Auto Turn-On circuit allow direct integration with factory head units without requiring a dedicated remote turn-on wire. RCA pass-through outputs enable daisy-chaining to additional amplifiers, and the stealth top-mounted control panel keeps all adjustments accessible without removing the amplifier from its install location. An optional PLC2 remote Punch Level Control (sold separately) connects to add driver-accessible output adjustment and an input clip indicator for real-time gain monitoring. Key Specifications Channels: 1 (mono) Output power: 300W @ 2 ohms (power at other impedances — not specified) Frequency response: Full-range (exact Hz range — not specified) Circuit topology: Not specified Crossover: 12dB/octave Butterworth (frequency range — not specified) Punch EQ: +18dB boost @ 45Hz (see Red-flags) Signal input: High level with Auto Turn-On Signal output: RCA pass-through Remote control: Optional PLC2 (not included — sold separately) Clip indicator: Yes (active when PLC2 is connected) Control panel: Top-mounted (stealth) Setup system: C.L.E.A.N. Input sensitivity: Not specified Nominal impedance load: Not specified CEA compliance: Not specified in provided data Power wire gauge: Not specified Speaker wire gauge: Not specified Operating voltage: Not specified Recommended fuse: Not specified Dimensions: Not specified Features & Benefits Full-Range Frequency Response — Sub or Centre Channel — Most compact mono amplifiers are subwoofer-only units with a fixed low-pass filter. The P300X1's full-range response opens up a second use case: powering a dedicated centre channel speaker in a vehicle with a more complex audio setup. One amplifier, two legitimate applications. C.L.E.A.N. Setup System — Rockford Fosgate's C.L.E.A.N. (Clean Level Efficient Amplifier Noise) setup process uses an on-board indicator to guide accurate gain calibration between the head unit and amplifier. Setting gain by ear or by eye is a common cause of distortion and clipping — C.L.E.A.N. removes the guesswork, protecting your speakers and ensuring the amplifier performs to its rated output without distortion. High-Level Input with Auto Turn-On — The P300X1 accepts high-level speaker wire inputs from factory or OEM head units and powers on automatically when it detects signal — no remote turn-on wire required. This significantly simplifies integration with factory audio systems, particularly in vehicles where accessing the head unit remote output is difficult or impractical. On-Board Punch EQ (+18dB @ 45Hz) — A bass boost centred at 45Hz is available directly from the amplifier, allowing low-end tuning without an external equaliser. The +18dB figure is sourced from the supplier features list — refer to Red-flags below for an important note on this specification. Optional PLC2 Remote Level Control with Clip Indicator — The P300X1 is wired ready for the optional Rockford Fosgate PLC2 remote level control (sold separately). When connected, the PLC2 adds driver-accessible output adjustment and activates an input clip indicator — a LED that warns when the incoming signal is clipping before it reaches the amplifier. This combination helps protect speakers and ensures clean output at all listening levels. RCA Pass-Through Outputs — Signal can be chained to a second amplifier via the RCA pass-through outputs, enabling clean multi-amp builds without splitters or Y-adaptors. Useful in systems running the P300X1 on a centre channel or sub with a separate amplifier on front and rear speakers. Stealth Top-Mounted Control Panel — All controls — gain, crossover, EQ — are located on the top surface of the amplifier rather than on the endplate. This allows access to adjustments after installation in boot floors, under-seat locations, or tight enclosures without the need to remove or reposition the unit. Compact Chassis — The P300X1 is specifically designed to fit installation locations where a conventional amplifier will not physically fit. Exact dimensions are not specified in supplier-provided data — confirm with Rockford Fosgate before planning a space-critical install. Muted Turn-On + Full Protection Circuit — Muted turn-on prevents startup thumps that can stress tweeters and subwoofer cones. Over-current and short-circuit protection safeguard the amplifier and connected drivers during fault conditions. Technical Specs Specification Detail Channels 1 (mono) Output power 300W @ 2Ω Power by impedance Not specified Frequency response Full-range (Hz range not specified) Circuit topology Not specified Crossover type 12dB/octave Butterworth Crossover frequency range Not specified Punch EQ +18dB @ 45Hz (unverified — see Red-flags) Signal input High level (auto turn-on) Signal output RCA pass-through Setup system C.L.E.A.N. Remote control Optional PLC2 (sold separately) Clip indicator Yes (when PLC2 connected) Control panel Top-mounted (stealth) Turn-on method Auto (from high-level input signal) Muted turn-on Yes Protection Over-current / Short circuit Input sensitivity Not specified CEA compliance Not specified Power wire gauge Not specified Speaker wire gauge Not specified Operating voltage Not specified Recommended fuse Not specified Dimensions Not specified Weight 4.3 kg Compatible With / Goes Well With The P300X1 is confirmed for the following applications based on manufacturer-provided information: Dedicated subwoofer systems (single driver or multiple speakers on one channel) Dedicated centre channel speaker amplification (full-range frequency response confirmed) 2-ohm subwoofer or speaker loads (300W RMS — power at other impedances not confirmed) Factory head units without RCA outputs (via high-level Auto Turn-On input) Goes well with: Rockford Fosgate Punch series subwoofers or centre channel drivers rated to 300W Rockford Fosgate PLC2 Remote Punch Level Control (optional — sold separately) Factory head units or OEM audio systems (via high-level auto turn-on) Aftermarket head units with RCA preamp outputs Frequently Asked Questions Can the P300X1 power a centre channel speaker as well as a subwoofer? Yes. Unlike most compact mono amplifiers, the P300X1 features a full-range frequency response — making it suitable for a dedicated centre channel speaker or a subwoofer system. The exact frequency range is not confirmed in the provided data; verify with Rockford Fosgate for your specific application. What is the C.L.E.A.N. setup system? C.L.E.A.N. is Rockford Fosgate's on-board gain calibration system. It uses an indicator to guide correct gain matching between the head unit and amplifier, preventing clipping and distortion that commonly results from gain set too high — protecting speakers and maximising clean output. Is the Punch Level Control included with the P300X1? No. The PLC2 remote Punch Level Control is an optional accessory and is sold separately. The P300X1 is wired and ready to accept the PLC2, and when connected it adds driver-accessible level control and an active input clip indicator. Does the Auto Turn-On circuit require a remote wire from the head unit? No. The high-level Auto Turn-On circuit powers the amplifier when it detects signal at the speaker-level inputs — no dedicated remote turn-on wire is needed. This simplifies installation with factory head units where accessing the remote output is difficult. Can I chain another amplifier off the P300X1? Yes. RCA pass-through outputs allow signal to be routed to a second amplifier cleanly, without splitters or Y-adaptors. This is useful in systems running the P300X1 alongside a separate full-range or multichannel amplifier. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less