Compact Combination Lamp with Integrated Licence Plate Light Stop, Tail, Indicator, Reflector. Twin Pack. Product Overview The LED Autolamps 149BARLP2 is a twin blister pack containing a matched pair of compact rear combination lamps one standard unit (149BAR) and one with an integrated horizontally-mounted licence plate lamp (149BARLP). Together they form a complete left-and-right rear lighting solution for small trailers, boat trailers, camper trailers, and light commercial applications, delivering stop, tail, indicator, reflex reflector, and licence plate illumination in a single compact footprint. Measuring just 150mm x 80mm x 29mm, the 149 series is one of the most widely used compact combination lamp formats in Australia a proven performer across the trailer and caravan industry. The lamp body mounts vertically with the indicator function at the top, secured via rear bolts through a 10mm hole in the fixing surface. With 8 LEDs in the main lamp and 4 LEDs in the integrated licence plate section, IP67 waterproofing, ECE compliance, and ultra-low current draw across all functions, the 149BARLP2 is a compact, reliable, and legally compliant rear lighting solution for 12V vehicles and trailers. Backed by LED Autolamps' 5-year warranty. Key Specifications Functions: Stop, tail, indicator, reflex reflector, licence plate lamp LED count: 8 in main lamp + 4 in licence plate lamp Licence plate lamp mount: Horizontal Dimensions: 150mm x 80mm x 29mm Mounting stud distance: 100mm Mount type: Vertical surface mount rear bolts through 10mm hole indicator at top Cable length: 40cm Wiring: Brown = tail/licence / Red = stop / Yellow = indicator / White = earth IP rating: IP67 Input voltage: 12V only Current draw: Stop 0.07A / Tail + Number Plate 0.05A / Indicator 0.08A @ 13.8V Compliance: ECE approved Warranty: 5 years Pack quantity: 2 lamps (1x 149BAR + 1x 149BARLP) twin blister pack Brand: LED Autolamps SKU: 149BARLP2 Features & Benefits Five functions in one compact unit: Stop, tail, indicator, reflex reflector, and integrated licence plate lamp eliminate the need for separate lamp assemblies in tight rear panel spaces Horizontally mounted licence plate lamp: The integrated licence plate light on the 149BARLP unit mounts horizontally for correct ADR/ECE licence plate illumination positioning Ultra-low current draw: Stop 0.07A / Tail+Plate 0.05A / Indicator 0.08A extremely low electrical load across all functions, ideal for small trailer electrical systems Compact 150mm x 80mm x 29mm footprint: One of the most space-efficient combination lamp formats available, suitable for small trailers, boat trailers, and tight rear panel applications 8 LED + 4 LED construction: 8 LEDs in the main lamp body and 4 LEDs in the integrated licence plate section provide bright, effective output in a minimal package IP67 waterproof: Completely sealed against dust and temporary water immersion particularly suited to boat trailer applications where the lamp may be submerged during launch Twin pack left and right: One 149BAR (non-licence) and one 149BARLP (with licence) provided per pack for a complete matched rear pair Colour-coded wiring: Brown (tail/licence), Red (stop), Yellow (indicator), White (earth) for fast, error-free installation ECE approved: Compliant with ECE standards for road use on trailers and vehicles 5-year warranty: Backed by LED Autolamps' 5-year product warranty Technical Specs Specification Detail SKU 149BARLP2 Brand LED Autolamps Series 149 Series Functions Stop, Tail, Indicator, Reflex Reflector, Licence Plate LED Count 8 (main lamp) + 4 (licence plate) Licence Plate Lamp Horizontal mount Dimensions 150mm x 80mm x 29mm Mounting Stud Distance 100mm Mount Type Vertical surface mount rear bolts, 10mm hole Cable Length 40cm Wiring Colour Code Brown = Tail/Licence, Red = Stop, Yellow = Indicator, White = Earth IP Rating IP67 Input Voltage 12V only Current Draw Stop 0.07A @ 13.8V Current Draw Tail + Number Plate 0.05A @ 13.8V Current Draw Indicator 0.08A @ 13.8V Compliance ECE approved Warranty 5 Years Pack Quantity 2 lamps (1x 149BAR + 1x 149BARLP) twin blister Compatible With Universal suits all 12V trailers requiring compact ADR/ECE-compliant rear combination lighting including: Small box trailers and car trailers Boat trailers (IP67 submersion suitable for boat ramp use) Camper trailers and small caravans Light commercial trailers Pairs well with: LED Autolamps 42WM white front position marker LED Autolamps 35CARM red/amber side marker LED Autolamps 7030R red self-adhesive reflectors Compatible LED Autolamps cable kits and plug-in harnesses (sold separately) Frequently Asked Questions What is included in the 149BARLP2 twin blister pack? The pack contains two lamps one 149BAR (stop/tail/indicator/reflector without licence plate lamp) and one 149BARLP (stop/tail/indicator/reflector with integrated horizontal licence plate lamp). Together they form a matched left-and-right rear lighting solution. Is this lamp suitable for boat trailer use? Yes the IP67 rating means the lamp is fully protected against dust and temporary water immersion, making the 149BARLP2 well-suited to boat trailer applications where the lamp may be submerged during boat launching. How is this lamp mounted? Mount vertically onto a flat surface with the indicator function at the top. Secure using rear bolts through a 10mm hole in the fixing surface. The mounting stud distance is 100mm. Refer to ADR 13/00 for mounting requirements. Is this lamp compatible with 24V vehicles? No the 149BARLP2 is 12V only. Confirm your trailer or vehicle operates on a 12V system before purchasing. What is the current draw across all functions? Current draw is extremely low Stop: 0.07A, Tail + Number Plate: 0.05A, Indicator: 0.08A all at 13.8V. This makes the 149 series one of the most power-efficient combination lamp options available for small 12V trailer applications. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Interior Strip Light 61 SMD LEDs, 6500K Cool White, Inbuilt Switch, IP67. Product Overview The LED Autolamps 1061/12SW is a 12V slimline interior LED strip lamp designed for use in caravans, camper trailers, trucks, vans, and marine applications. Measuring just 300mm x 25mm x 10mm at an ultra-low profile of 10mm deep, this lamp packs 61 SMD LEDs into a compact, practical format delivering high-brightness cool white illumination equivalent to a 30W incandescent globe at a fraction of the current draw. The 6500K cool white colour temperature produces a crisp, bright daylight-style light spread across a 120-degree angle well-suited to work areas, reading zones, and general interior illumination in vehicles and trailers. The inbuilt push button on/off switch eliminates the need for a separate switched circuit, simplifying installation considerably. IP67 rated for both interior and exterior use, the 1061/12SW is a versatile, reliable light source backed by a 3-year warranty. Key Specifications LED count: 61 SMD LEDs Colour temperature: 6500K (cool white) Equivalent output: 30W incandescent globe Light spread: 120-degree Dimensions: 300mm x 25mm x 10mm Switch: Inbuilt push button on/off Mount type: Surface mount remove end bezels, screw fix IP rating: IP67 (interior or exterior use) Input voltage: 12V only Current draw: 0.31A @ 13.8V Warranty: 3 years Weight: 0.06kg Brand: LED Autolamps SKU: 1061/12SW (also referred to as 106112SW) Features & Benefits 61 SMD LEDs 30W equivalent: High LED count in a slimline 300mm strip delivers impressive light output comparable to a 30W incandescent globe at significantly lower current draw 6500K cool white: Crisp daylight-style colour temperature ideal for work areas, reading lights, and general task lighting in vehicle and trailer interiors 120-degree light spread: Wide angle illumination provides broad, even coverage across the interior area below the lamp Inbuilt push button on/off switch: Built-in switch allows independent on/off control without requiring a separate switched circuit simplifying installation and adding convenience for the user Ultra-slim 10mm profile: At just 10mm deep, the 1061/12SW installs flush against headliners, walls, and surfaces without protruding into usable space IP67 rated: Suitable for both interior and exterior use fully protected against dust ingress and temporary water immersion for installation in wet or demanding environments Surface mount with end bezels: End bezels remove for concealed screw mounting, then refit for a clean, finished appearance with no visible fasteners Low current draw: Just 0.31A at 12V, placing minimal load on the vehicle or trailer's 12V electrical system 12V only: Direct 12V compatibility for caravans, camper trailers, trucks, vans, and marine applications 3-year warranty: Backed by LED Autolamps' 3-year product warranty Technical Specs Specification Detail SKU 1061/12SW (106112SW) Brand LED Autolamps LED Count 61 SMD LEDs Colour Temperature 6500K (cool white) Equivalent Output 30W incandescent Light Spread 120-degree Dimensions 300mm x 25mm x 10mm Switch Inbuilt push button on/off Mount Type Surface mount end bezel removal, screw fix IP Rating IP67 Input Voltage 12V only Current Draw 0.31A @ 13.8V Warranty 3 Years Weight 0.06kg Compatible With Universal suits all 12V vehicles and applications requiring interior or exterior strip lighting including: Caravans and camper trailers Motorhomes and campervans Trucks and van interiors Marine and boat interior lighting Toolboxes, canopies, and storage areas Workshop and utility vehicle interior lighting Frequently Asked Questions Does this lamp include a switch? Yes the 1061/12SW features an inbuilt push button on/off switch, allowing independent on/off control without a separate switched circuit. What colour temperature is this lamp? The 1061/12SW is 6500K a cool white, daylight-style colour temperature that produces a bright, crisp light output suited to task and work area lighting. Is this lamp suitable for exterior use? Yes the IP67 rating makes the 1061/12SW suitable for both interior and exterior applications, including installation in areas exposed to rain, moisture, or wash-down. Is this lamp compatible with 24V vehicles? No the 1061/12SW is 12V only. For a 24V version, refer to the LED Autolamps 1061/24SW. How is this lamp mounted? Remove the end bezels, surface mount using screws through the exposed mounting points, then refit the bezels for a clean finished appearance. No visible fasteners on the completed installation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Interior Strip Light 121 SMD LEDs, 6500K Cool White, 600mm, IP67. Product Overview The LED Autolamps 10121/24 is a 24V slimline interior LED strip lamp designed for use in trucks, buses, vans, trailers, and 24V commercial vehicle applications. At 600mm long with a slim 25mm width and just 10mm deep, this lamp packs 121 SMD LEDs into a low-profile strip format delivering high-brightness cool white illumination across a 120-degree spread for effective interior coverage. The 6500K cool white colour temperature produces a crisp, bright daylight-style output suited to driver cabs, storage areas, and general interior lighting in 24V commercial vehicles. Note that this is the direct-feed version without an inbuilt switch a switched circuit or separate switch is required for on/off control. IP67 rated for both interior and exterior use, the 10121/24 is a reliable, long-lasting 24V interior lighting solution backed by a 3-year warranty. For the switch version, refer to the 10121/24SW. Key Specifications LED count: 121 SMD LEDs Colour temperature: 6500K (cool white) Light spread: 120-degree Dimensions: 600mm x 25mm x 10mm Switch: Not included direct feed (switched circuit required) Mount type: Surface mount remove end bezels, screw fix IP rating: IP67 (interior or exterior use) Input voltage: 24V only Current draw: Approx. 0.31A @ 28V Warranty: 3 years Brand: LED Autolamps SKU: 10121/24 Features & Benefits 121 SMD LEDs: High LED count in a 600mm strip delivers impressive high-brightness cool white illumination for effective interior coverage across driver cabs, cargo areas, and utility vehicle interiors 6500K cool white: Crisp daylight-style colour temperature ideal for task lighting, driver cab illumination, and general interior lighting in 24V commercial vehicles 120-degree light spread: Wide angle illumination provides broad, even coverage across the interior area below the lamp Ultra-slim 10mm profile: At just 10mm deep, the 10121/24 installs flush against headliners, walls, and surfaces without protruding into usable space IP67 rated: Suitable for both interior and exterior use fully protected against dust ingress and temporary water immersion Surface mount with end bezels: End bezels remove for concealed screw mounting, then refit for a clean, finished appearance with no visible fasteners 24V only: Designed for 24V commercial vehicle electrical systems including trucks, buses, trailers, and refrigerated van bodies Low current draw: Approximately 0.31A at 28V, placing minimal load on the vehicle's 24V electrical system 3-year warranty: Backed by LED Autolamps' 3-year product warranty Technical Specs Specification Detail SKU 10121/24 Brand LED Autolamps LED Count 121 SMD LEDs Colour Temperature 6500K (cool white) Light Spread 120-degree Dimensions 600mm x 25mm x 10mm Switch Not included direct feed Mount Type Surface mount end bezel removal, screw fix IP Rating IP67 Input Voltage 24V only Current Draw Approx. 0.31A @ 28V Warranty 3 Years Compatible With Universal suits all 24V commercial vehicles and applications requiring interior or exterior strip lighting including: Truck and bus driver cabs and sleeper compartments Refrigerated trailer and van body interiors Commercial van and utility vehicle interiors 24V marine and boat interior lighting Toolboxes, canopies, and storage areas on 24V vehicles Related Products: LED Autolamps 10121/24SW same lamp with inbuilt push button switch (24V) LED Autolamps 10121/12 same lamp in 12V version (without switch) LED Autolamps 10121/12SW same lamp in 12V version with switch Frequently Asked Questions Does this lamp include a switch? No the 10121/24 is the direct-feed version without an inbuilt switch. A switched circuit or external switch must be provided for on/off control. For the version with an inbuilt push button switch, refer to the LED Autolamps 10121/24SW. What colour temperature is this lamp? The 10121/24 is 6500K a cool white, daylight-style colour temperature that produces a bright, crisp light output suited to task and driver cab lighting in 24V commercial vehicles. Is this lamp compatible with 12V vehicles? No the 10121/24 is 24V only. For 12V applications, refer to the LED Autolamps 10121/12 (without switch) or 10121/12SW (with switch). Is this lamp suitable for exterior use? Yes the IP67 rating makes the 10121/24 suitable for both interior and exterior applications, including installation in areas exposed to rain, moisture, or wash-down conditions. How is this lamp mounted? Remove the end bezels, surface mount using two screw points through the exposed mounting holes, run wires through the mounting surface, then refit the bezels for a clean finished appearance. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less