RFI BBWM-63-B Black Stainless Steel Wrap Around Bull Bar Bracket - Professional 63mm Diameter Bull Bar Antenna Mount with 6mm Cable Slot, Dual Bolt Installation, and Security Locking Screw Achieve secure professional bull bar antenna mounting with RFI BBWM-63-B Black Stainless Steel Wrap Around Bracket—featuring vehicle-specific 63mm diameter bull bar compatibility ensuring precise fitment on popular Australian mid-size bull bar tubing, heavy-duty 3mm stainless steel construction providing exceptional mounting strength and long-term durability for demanding off-road and highway conditions, professional black powder-coated finish enhancing corrosion protection and complementing modern 4WD vehicle aesthetics, innovative wrap-around design encircling bull bar tube providing superior mounting security and load distribution compared to standard clamp brackets, integrated 6mm cable slot simplifying antenna installation and cable management eliminating separate routing requirements, dual installation bolts distributing mounting loads across wrap-around design ensuring stable secure attachment, security locking screw preventing unauthorized antenna removal or theft protecting valuable communication equipment, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, universal UHF CB antenna compatibility accommodating spring bases and fixed-mount configurations, part of comprehensive BBWM range offering bull bar bracket options for 45mm, 50mm, 63mm, 73mm, and 76mm diameter applications, and proven RFI quality engineering delivering reliable purpose-built bull bar antenna mounting solution for 4WD touring, commercial vehicles, and off-road communication installations. Product Overview Black powder coated wrap around stainless steel bull bar bracket with 6mm cable slot for ease of antenna mounting. Specifically manufactured to mount antennas onto 63mm diameter bull bars, the BBWM-63 features black powder coated 3mm stainless steel construction, 6mm cable slot, dual installation bolts and security locking screw. The BBWM range cater for bars of 45, 50, 63 and 73mm diameters. Key Features Vehicle-Specific 63mm Bull Bar Diameter Compatibility - Precisely engineered for 63mm diameter bull bar tubes ensuring proper fitment on popular Australian mid-size 4WD bull bar configurations. Heavy-Duty 3mm Stainless Steel Construction - Robust 3mm stainless steel material provides exceptional mounting strength and structural rigidity for demanding off-road and highway antenna installations. Professional Black Powder-Coated Finish - Durable black coating enhances corrosion protection and provides discreet appearance complementing modern 4WD vehicle styling and dark-colored bull bars. Wrap-Around Design for Superior Security - Innovative bracket encircles bull bar tube providing superior mounting stability and load distribution compared to standard clamp-style brackets. Integrated 6mm Cable Slot with Dual Bolt Installation - Built-in cable slot simplifies antenna installation while dual installation bolts distribute mounting loads ensuring stable secure attachment to bull bar. Security Locking Screw Anti-Theft Protection - Integrated security locking screw prevents unauthorized antenna removal protecting valuable UHF CB communication equipment from theft. Technical Specifications Specification Details Model BBWM-63-B SKU BBWM-63-B Brand RFI Product Type Bull Bar Antenna Bracket (Wrap-Around Design) Material Stainless Steel Material Thickness 3mm (Heavy Duty) Finish Black (Powder-Coated) Design Wrap-around bull bar bracket with cable slot Bull Bar Diameter Compatibility 63mm Cable Slot 6mm Installation Bolts Dual installation bolts (2 included) Security Feature Security locking screw Vehicle Compatibility Universal (4WD vehicles, utes, trucks with 63mm bull bars) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Component Type Bracket Drilling Required No drilling to bull bar (wrap-around clamp design) Corrosion Protection Black powder-coated finish over stainless steel BBWM Range Available in 45mm, 50mm, 63mm, 73mm, 76mm diameters Application Bull bar antenna mounting, 4WD communication installations, Off-road antenna mounting Frequently Asked Questions Q: What vehicles typically have 63mm diameter bull bars? A: 63mm diameter common on mid-size 4WD vehicles and popular utes including Hilux, Ranger, D-Max, Triton, Colorado, and Navara. Represents popular mid-range bull bar size between lighter 50mm bars and heavy-duty 76mm bars. Measure bull bar tube diameter at proposed mounting location confirming 63mm before purchase. Bull bar manufacturers use various tube sizes—verify actual diameter rather than assuming based on vehicle model. Q: What is the difference between BBWM-63-B and BBWM-76-B? A: BBWM-63-B and BBWM-76-B identical in construction and features—sole difference is diameter compatibility. BBWM-63-B fits 63mm bull bars (mid-size vehicles), BBWM-76-B fits 76mm bull bars (larger vehicles). Both: 3mm stainless steel, black powder-coated finish, 6mm cable slot, dual bolts, security screw. Measure bull bar diameter and select corresponding BBWM model. Using incorrect size risks inadequate clamping, bracket slippage, or bull bar finish damage. Q: Can BBWM-63-B fit bull bars slightly different from 63mm? A: BBWM-63-B specifically engineered for 63mm diameter—not recommended for significantly different sizes. Minor tolerance (±1-2mm) may work but compromises fitment and security. For other diameters: BBWM-76 (76mm), BBWM-73 (73mm), BBWM-50 (50mm), BBWM-45 (45mm). Measure bull bar accurately using calipers or measuring tape. Select correct BBWM bracket ensuring proper wrap-around engagement and secure mounting without over-tightening. Q: How do I install BBWM-63-B on my bull bar? A: Position wrap-around bracket on 63mm bull bar tube at desired antenna mounting location. Thread cable through 6mm slot before tightening if pre-routing cable. Insert dual installation bolts through bracket holes and tighten progressively ensuring even clamping around tube. Install security locking screw after positioning bracket correctly. Verify bracket secure without excessive tightening potentially damaging bull bar finish. Mount antenna through bracket hole and connect cable. Q: Will black finish match my bull bar color? A: BBWM-63-B black powder-coated finish complements matte black, powder-coated black, or dark-colored bull bars providing coordinated appearance. Ideal for modern 4WD styling with black accessories. If bull bar features polished stainless, chrome, or aluminum finish, consider BBWM-63 polished stainless version for better aesthetic match. Black finish provides enhanced corrosion protection while maintaining discreet low-profile appearance on dark bull bars.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI BBWM-76 Polished Stainless Steel Wrap Around Bull Bar Bracket - Professional 76mm Diameter Bull Bar Antenna Mount with 6mm Cable Slot, Dual Bolt Installation, and Security Locking Screw Achieve secure professional bull bar antenna mounting with RFI BBWM-76 Polished Stainless Steel Wrap Around Bracket—featuring vehicle-specific 76mm diameter bull bar compatibility ensuring precise fitment on standard Australian bull bar tubing, heavy-duty 3mm stainless steel construction providing exceptional mounting strength and long-term durability for demanding off-road and highway conditions, professional polished stainless steel finish offering bright metallic appearance complementing chrome and polished bull bars, innovative wrap-around design encircling bull bar tube providing superior mounting security and load distribution compared to standard clamp brackets, integrated 6mm cable slot simplifying antenna installation and cable management eliminating separate routing requirements, dual installation bolts distributing mounting loads across wrap-around design ensuring stable secure attachment, security locking screw preventing unauthorized antenna removal or theft protecting valuable communication equipment, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, universal UHF CB antenna compatibility accommodating spring bases and fixed-mount configurations, part of comprehensive BBWM range offering bull bar bracket options for 45mm, 50mm, 63mm, 73mm, and 76mm diameter applications, and proven RFI quality engineering delivering reliable purpose-built bull bar antenna mounting solution for 4WD touring, commercial vehicles, and off-road communication installations. Product Overview Polished wrap around stainless steel bull bar bracket with 6mm cable slot for ease of antenna mounting. Specifically manufactured to mount antennas onto 76mm diameter bull bars, the BBWM-76 features 3mm stainless steel construction, 6mm cable slot, dual installation bolts and security locking screw. The BBWM range cater for bars of 45, 50, 63 and 73mm diameters. Key Features Vehicle-Specific 76mm Bull Bar Diameter Compatibility - Precisely engineered for 76mm diameter bull bar tubes ensuring proper fitment on standard Australian 4WD bull bar configurations. Heavy-Duty 3mm Stainless Steel Construction - Robust 3mm stainless steel material provides exceptional mounting strength and structural rigidity for demanding off-road and highway antenna installations. Professional Polished Stainless Steel Finish - Bright metallic polished finish provides premium appearance complementing chrome and polished bull bars while maintaining excellent corrosion resistance. Wrap-Around Design for Superior Security - Innovative bracket encircles bull bar tube providing superior mounting stability and load distribution compared to standard clamp-style brackets. Integrated 6mm Cable Slot with Dual Bolt Installation - Built-in cable slot simplifies antenna installation while dual installation bolts distribute mounting loads ensuring stable secure attachment to bull bar. Security Locking Screw Anti-Theft Protection - Integrated security locking screw prevents unauthorized antenna removal protecting valuable UHF CB communication equipment from theft. Technical Specifications Specification Details Model BBWM-76 SKU BBWM-76 Brand RFI Product Type Bull Bar Antenna Bracket (Wrap-Around Design) Material Stainless Steel Material Thickness 3mm (Heavy Duty) Finish Polished Stainless Steel Design Wrap-around bull bar bracket with cable slot Bull Bar Diameter Compatibility 76mm Cable Slot 6mm Installation Bolts Dual installation bolts (2 included) Security Feature Security locking screw Vehicle Compatibility Universal (4WD vehicles, utes, trucks with 76mm bull bars) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Component Type Bracket Drilling Required No drilling to bull bar (wrap-around clamp design) Corrosion Protection Polished stainless steel (natural corrosion resistance) BBWM Range Available in 45mm, 50mm, 63mm, 73mm, 76mm diameters Application Bull bar antenna mounting, 4WD communication installations, Off-road antenna mounting Frequently Asked Questions Q: What is the difference between BBWM-76 and BBWM-76-B? A: BBWM-76 and BBWM-76-B identical in construction and functionality—sole difference is finish. BBWM-76 features polished stainless steel finish providing bright metallic appearance ideal for chrome or polished bull bars. BBWM-76-B features black powder-coated finish complementing dark-colored or matte black bull bars. Both: 3mm stainless steel, 76mm diameter, 6mm cable slot, dual bolts, security locking screw. Choose BBWM-76 for traditional polished appearance matching chrome accessories. Choose BBWM-76-B for modern matte black aesthetic. Q: Will polished stainless steel finish match my bull bar? A: BBWM-76 polished stainless steel finish complements chrome, polished stainless, or aluminum bull bars providing coordinated appearance. Bright metallic finish suitable for traditional 4WD styling with chrome accessories. If bull bar features powder-coated black, matte black, or dark finish, consider BBWM-76-B black version for better aesthetic match. Polished finish maintains natural stainless corrosion resistance without coating requiring maintenance. Q: How do I measure my bull bar to confirm 76mm diameter? A: Use calipers or measuring tape measuring outside diameter of bull bar tube at proposed antenna mounting location—76mm represents external tube diameter. Common Australian bull bar diameters: 45mm, 50mm, 63mm, 73mm, 76mm (outside measurements). 76mm typical for heavy-duty bull bars on larger 4WD vehicles (Landcruiser, Patrol, RAM). Some bull bars feature different tube diameters at various positions—verify measurement at actual mounting location. RFI BBWM range covers all common diameters. Q: How does wrap-around design compare to U-bolt or clamp brackets? A: Wrap-around design encircles bull bar tube providing superior mounting compared to U-bolts or single-point clamps. Benefits: distributes antenna loads across greater surface area preventing stress concentration, resists rotation and twisting under wind loads, integrated cable slot within wrap-around structure, dual bolt installation plus security screw. U-bolts and clamps attach at limited points potentially allowing movement. Wrap-around design particularly beneficial for highway speeds and severe off-road conditions requiring maximum antenna stability. Q: Can BBWM-76 mount on horizontal and vertical bull bar tubes? A: Yes—BBWM-76 wrap-around design suitable for both horizontal and vertical 76mm bull bar tubes. Horizontal mounting (most common): positions antenna vertically on top horizontal tube providing elevated position. Vertical mounting: attaches to vertical bull bar uprights if preferred. Verify 6mm cable slot orientation allows proper cable routing regardless of tube orientation. Dual bolt installation maintains secure attachment on either orientation. Select mounting location optimizing antenna position, vehicle clearance, and cable routing convenience.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI BBWM-76-B Black Stainless Steel Wrap Around Bull Bar Bracket - Professional 76mm Diameter Bull Bar Antenna Mount with 6mm Cable Slot, Dual Bolt Installation, and Security Locking Screw Achieve secure professional bull bar antenna mounting with RFI BBWM-76-B Black Stainless Steel Wrap Around Bracket—featuring vehicle-specific 76mm diameter bull bar compatibility ensuring precise fitment on standard Australian bull bar tubing, heavy-duty 3mm stainless steel construction providing exceptional mounting strength and long-term durability for demanding off-road and highway conditions, professional black powder-coated finish enhancing corrosion protection and complementing modern 4WD vehicle aesthetics, innovative wrap-around design encircling bull bar tube providing superior mounting security and load distribution compared to standard clamp brackets, integrated 6mm cable slot simplifying antenna installation and cable management eliminating separate routing requirements, dual installation bolts distributing mounting loads across wrap-around design ensuring stable secure attachment, security locking screw preventing unauthorized antenna removal or theft protecting valuable communication equipment, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, universal UHF CB antenna compatibility accommodating spring bases and fixed-mount configurations, part of comprehensive BBWM range offering bull bar bracket options for 45mm, 50mm, 63mm, 73mm, and 76mm diameter applications, and proven RFI quality engineering delivering reliable purpose-built bull bar antenna mounting solution for 4WD touring, commercial vehicles, and off-road communication installations. Product Overview Black powder coated wrap around stainless steel bull bar bracket with 6mm cable slot for ease of antenna mounting. Specifically manufactured to mount antennas onto 76mm diameter bull bars, the BBWM-76-B features black powder coated 3mm stainless steel construction, 6mm cable slot, dual installation bolts and security locking screw. The BBWM range cater for bars of 45, 50, 63 and 73mm diameters. Key Features Vehicle-Specific 76mm Bull Bar Diameter Compatibility - Precisely engineered for 76mm diameter bull bar tubes ensuring proper fitment on standard Australian 4WD bull bar configurations. Heavy-Duty 3mm Stainless Steel Construction - Robust 3mm stainless steel material provides exceptional mounting strength and structural rigidity for demanding off-road and highway antenna installations. Professional Black Powder-Coated Finish - Durable black coating enhances corrosion protection and provides discreet appearance complementing modern 4WD vehicle styling and dark-colored bull bars. Wrap-Around Design for Superior Security - Innovative bracket encircles bull bar tube providing superior mounting stability and load distribution compared to standard clamp-style brackets. Integrated 6mm Cable Slot with Dual Bolt Installation - Built-in cable slot simplifies antenna installation while dual installation bolts distribute mounting loads ensuring stable secure attachment to bull bar. Security Locking Screw Anti-Theft Protection - Integrated security locking screw prevents unauthorized antenna removal protecting valuable UHF CB communication equipment from theft. Technical Specifications Specification Details Model BBWM-76-B SKU BBWM-76-B Brand RFI Product Type Bull Bar Antenna Bracket (Wrap-Around Design) Material Stainless Steel Material Thickness 3mm (Heavy Duty) Finish Black (Powder-Coated) Design Wrap-around bull bar bracket with cable slot Bull Bar Diameter Compatibility 76mm Cable Slot 6mm Installation Bolts Dual installation bolts (2 included) Security Feature Security locking screw Vehicle Compatibility Universal (4WD vehicles, utes, trucks with 76mm bull bars) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Component Type Bracket Drilling Required No drilling to bull bar (wrap-around clamp design) Corrosion Protection Black powder-coated finish over stainless steel BBWM Range Available in 45mm, 50mm, 63mm, 73mm, 76mm diameters Application Bull bar antenna mounting, 4WD communication installations, Off-road antenna mounting Frequently Asked Questions Q: How do I determine if my bull bar is 76mm diameter? A: Measure bull bar tube diameter using calipers or measuring tape—76mm represents outside diameter of bull bar tube. Common Australian bull bar sizes: 45mm, 50mm, 63mm, 73mm, 76mm. 76mm diameter typical for heavy-duty 4WD bull bars on larger vehicles (Landcruiser, Patrol, RAM trucks). Measure at proposed antenna mounting location as some bull bars feature different tube diameters at various positions. If uncertain, consult bull bar manufacturer specifications or measure existing bull bar. RFI BBWM range offers brackets for all common diameters ensuring proper fitment. Q: What is the advantage of wrap-around design versus clamp-style brackets? A: Wrap-around design encircles bull bar tube providing superior mounting security and stability. Benefits: distributes antenna loading across greater bull bar surface area, resists rotation and movement better than single-point clamps, enhanced security with dual bolts plus locking screw, integrated cable slot within wrap-around structure. Clamp-style brackets attach at single point potentially allowing rotation under antenna wind loads. Wrap-around design particularly beneficial for highway speeds and off-road conditions where antenna stability critical. Q: How does the security locking screw prevent antenna theft? A: Security locking screw requires special key or tool preventing removal with standard tools—deters opportunistic antenna theft. Standard installation bolts secure bracket to bull bar, security screw prevents antenna removal from mounted bracket. Benefits: protects valuable UHF CB antennas from theft, particularly important for commercial vehicles and urban parking, simple security measure without complex locking mechanisms. Security screw complements dual bolt installation providing theft deterrent while maintaining convenient authorized antenna removal when needed. Q: Will BBWM-76-B fit bull bars slightly smaller or larger than 76mm? A: BBWM-76-B specifically engineered for 76mm diameter—not recommended for significantly different sizes. Minor tolerance (±1-2mm) may work but compromises optimal fitment and mounting security. For other diameters: BBWM-73 (73mm), BBWM-63 (63mm), BBWM-50 (50mm), BBWM-45 (45mm). Measure bull bar accurately and select corresponding BBWM bracket ensuring proper wrap-around engagement and secure mounting. Using incorrect size risks inadequate clamping force, potential bracket slippage, or damage to bull bar finish from over-tightening attempting to compensate. Q: Can BBWM-76-B mount antennas on horizontal or vertical bull bar tubes? A: BBWM-76-B wrap-around design suitable for both horizontal and vertical 76mm bull bar tubes. Horizontal tube mounting (most common): positions antenna vertically on top horizontal bull bar tube providing elevated mounting position. Vertical tube mounting: attaches to vertical bull bar uprights if preferred positioning or horizontal tubes unavailable. Verify cable slot orientation allows proper cable routing regardless of tube orientation. Dual bolt installation and wrap-around design maintain secure mounting on either horizontal or vertical tubes. Choose mounting location optimizing antenna position and cable routing to vehicle interior.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI MM2 Galvanised Mirror Mount Bracket - Heavy-Duty Universal Antenna Mounting Bracket for Truck Mirrors, Roof Racks, and Bull Bars with Corrosion-Resistant Galvanised Finish Achieve versatile professional antenna mounting with RFI MM2 Galvanised Mirror Mount Bracket—featuring heavy-duty galvanised steel construction providing robust corrosion-resistant mounting platform for UHF CB antennas across diverse vehicle mounting locations, professional galvanised finish offering excellent rust protection and durability in harsh Australian environments, universal mirror mount capability allowing secure antenna installation on truck-style side mirrors without permanent vehicle modifications, versatile roof rack compatibility providing elevated antenna mounting for improved UHF performance and 360-degree coverage, bull bar mounting suitability enabling front-mounted antenna installations on 4WD vehicles with aftermarket protection equipment, heavy-duty construction supporting any mobile antenna configuration including spring bases and fixed-mount antennas, adjustable mounting design accommodating different mounting scenarios and hardware requirements, compact efficient design maintaining minimal visual impact while providing secure antenna support, universal compatibility suitable for trucks, utes, 4WD vehicles, and commercial vehicles requiring flexible antenna mounting solutions, and proven RFI quality engineering delivering reliable cost-effective multi-purpose antenna mounting solution for diverse vehicle communication installations. Product Overview Heavy-duty mirror mount allows any mobile antenna to be mounted on a truck style mirror, roof rack, or bull bar. Heavy-duty mirror mount allows any mobile antenna to be mounted on a truck style mirror, roof rack, or bull bar. Key Features Heavy-Duty Galvanised Steel Construction - Robust galvanised steel material provides superior mounting strength and excellent corrosion protection for demanding antenna installations across multiple mounting locations. Versatile Multi-Position Mounting Capability - Universal design accommodates truck-style side mirrors, roof racks, and bull bars providing flexible antenna mounting solutions for diverse vehicle configurations. Professional Galvanised Corrosion Protection - Hot-dip galvanised finish provides excellent rust resistance and durability in harsh Australian coastal and outback environments. Universal Mirror Mount Compatibility - Suitable for truck-style and commercial vehicle side mirrors providing convenient antenna mounting without permanent vehicle modifications. Roof Rack and Bull Bar Mounting - Compatible with aftermarket roof racks and bull bars expanding antenna mounting options for 4WD vehicles and adventure touring setups. Any Mobile Antenna Compatibility - Heavy-duty construction supports all mobile antenna types including spring bases, fixed mounts, and standard UHF CB antennas. Technical Specifications Specification Details Model MM2 SKU MM2 Brand RFI Product Type Mirror Mount Antenna Bracket (Galvanised Universal Design) Material Steel Finish Galvanised Design Mirror mount bracket Mounting Locations Truck-style mirrors, Roof racks, Bull bars Mounting Type Universal adjustable configuration Vehicle Compatibility Universal (trucks, utes, 4WD vehicles, commercial vehicles) Antenna Compatibility Any mobile antenna (UHF CB antennas, Spring bases, Fixed mounts) Component Type Bracket Drilling Required Depends on mounting location and method Construction Heavy Duty Corrosion Protection Hot-dip galvanised coating Application Mirror mounting, Roof rack mounting, Bull bar mounting, Multi-position antenna installation Frequently Asked Questions Q: What is the difference between MM2 and MM2-SS? A: MM2 and MM2-SS functionally identical mirror mount brackets—sole difference is finish. MM2 features galvanised steel finish providing excellent corrosion protection at economical price point. MM2-SS uses stainless steel construction offering premium corrosion resistance and bright metallic appearance. Choose MM2 for cost-effective durability with proven galvanised protection. Choose MM2-SS for premium stainless finish or when matching existing stainless components. Both deliver reliable mounting performance across truck mirrors, roof racks, and bull bars. Q: How does galvanised finish compare to stainless steel for antenna brackets? A: Galvanised finish provides excellent corrosion protection through zinc coating—suitable for most Australian conditions including coastal and outback environments. Benefits: cost-effective compared to stainless steel, proven rust resistance, durable protective coating. Stainless steel offers premium corrosion resistance and bright metallic appearance without coating. Both finishes adequate for antenna mounting—galvanised represents economical choice while stainless provides premium option. Choose based on budget and aesthetic preferences. Q: What truck-style mirrors are compatible with MM2? A: MM2 designed for truck-style and commercial vehicle side mirrors with robust mounting structure—particularly suitable for large truck mirrors, heavy-duty ute mirrors with extended arms, 4WD vehicle mirrors with substantial housings, aftermarket towing mirrors. Verify mirror construction adequate supporting antenna weight and wind loading during highway travel. Compact passenger vehicle mirrors typically lack structural support for secure antenna mounting. Test-fit bracket on mirror assembly before final installation confirming proper engagement. Q: Can MM2 mount antennas on roof racks and bull bars? A: Yes—MM2 versatile universal design accommodates truck mirrors, roof racks, and bull bars. Roof rack mounting: bracket clamps onto roof rack rails or crossbars providing elevated antenna position improving UHF range and coverage. Bull bar mounting: attaches to bull bar tubes providing front-mounted antenna installation on 4WD vehicles. Universal design adjusts to various mounting surface configurations. Verify appropriate mounting hardware (U-bolts, clamps, bolts) for specific roof rack or bull bar tube diameter. Q: What hardware is needed to install MM2? A: MM2 mounting hardware varies by installation location—universal bracket design requires appropriate fasteners for specific mounting surface. Truck mirror mounting: bolts/nuts matching mirror arm diameter or housing mounting points. Roof rack mounting: U-bolts or clamps sized for rack tube diameter (typically 25-50mm). Bull bar mounting: U-bolts, hose clamps, or bolts matching bull bar tube diameter. Consult local automotive fastener supplier for hardware appropriate to your specific mounting location and surface dimensions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI MM2-SS Stainless Steel Slotted Mirror Mount Bracket - Heavy-Duty Universal Antenna Mounting Bracket for Truck Mirrors, Roof Racks, and Bull Bars with Adjustable Slotted Design Achieve versatile professional antenna mounting with RFI MM2-SS Stainless Steel Slotted Mirror Mount Bracket—featuring heavy-duty stainless steel construction providing robust corrosion-resistant mounting platform for UHF CB antennas across diverse vehicle mounting locations, innovative slotted design enabling adjustable antenna positioning and accommodating various mounting surface configurations, universal mirror mount capability allowing secure antenna installation on truck side mirrors without permanent vehicle modifications, versatile roof rack compatibility providing elevated antenna mounting for improved UHF performance and 360-degree coverage, bull bar mounting suitability enabling front-mounted antenna installations on 4WD vehicles with aftermarket protection equipment, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, adjustable slotted configuration accommodating different mounting scenarios and hardware requirements, compact efficient design maintaining minimal visual impact while providing secure antenna support, universal compatibility suitable for trucks, utes, 4WD vehicles, and commercial vehicles requiring flexible antenna mounting solutions, and proven RFI quality engineering delivering reliable multi-purpose antenna mounting solution for diverse vehicle communication installations. Product Overview Heavy duty mirror mount allows antennas to be mounted on truck mirrors, roof racks or bull bars. Heavy duty mirror mount allows antennas to be mounted on truck mirrors, roof racks or bull bars. Key Features Heavy-Duty Stainless Steel Construction - Robust stainless steel material provides superior mounting strength and corrosion resistance for demanding antenna installations across multiple mounting locations. Versatile Multi-Position Mounting Capability - Universal design accommodates truck side mirrors, roof racks, and bull bars providing flexible antenna mounting solutions for diverse vehicle configurations. Adjustable Slotted Design - Slotted configuration enables adjustable antenna positioning and accommodates various mounting surface dimensions and hardware requirements. Universal Mirror Mount Compatibility - Suitable for truck and commercial vehicle side mirrors providing convenient antenna mounting without permanent vehicle modifications. Roof Rack and Bull Bar Mounting - Compatible with aftermarket roof racks and bull bars expanding antenna mounting options for 4WD vehicles and adventure touring setups. Professional Corrosion-Resistant Finish - Natural stainless steel construction resists rust and environmental degradation maintaining long-term mounting reliability. Technical Specifications Specification Details Model MM2-SS SKU MM2-SS Brand RFI Product Type Mirror Mount Antenna Bracket (Slotted Universal Design) Material Stainless Steel Finish Stainless Steel (natural) Design Slotted mirror mount bracket Mounting Locations Truck mirrors, Roof racks, Bull bars Mounting Type Adjustable slotted configuration Vehicle Compatibility Universal (trucks, utes, 4WD vehicles, commercial vehicles) Antenna Compatibility Standard UHF CB antennas Component Type Bracket Drilling Required Depends on mounting location and method Construction Heavy Duty Application Mirror mounting, Roof rack mounting, Bull bar mounting, Multi-position antenna installation Frequently Asked Questions Q: What mirrors are compatible with MM2-SS mirror mount bracket? A: MM2-SS designed for truck and commercial vehicle side mirrors with adequate mounting surface—particularly suitable for large truck mirrors with robust mounting arms or housings. Compatible with: commercial truck side mirrors, heavy-duty ute mirrors, 4WD vehicle mirrors with extended arms, aftermarket towing mirrors with substantial mounting structure. Verify mirror construction adequate supporting antenna weight and wind loading. Compact passenger vehicle mirrors may lack structural support for secure antenna mounting. Q: How does mirror mounting compare to fender or roof mounting? A: Mirror mounting provides unique advantages: elevated antenna position improving UHF range compared to fender mounting, more accessible than roof mounting for installation and maintenance, no permanent vehicle body modifications required, convenient driver-side visibility confirming antenna security. Considerations: mirror structure must support antenna weight and wind loads, potential mirror vibration affecting antenna stability, aesthetic impact of antenna on mirror assembly. Choose mirror mounting when elevated position desired without roof installation complexity. Q: Can MM2-SS be used on roof racks and bull bars? A: Yes—MM2-SS versatile design accommodates roof racks and bull bars in addition to mirror mounting. Roof rack mounting: clamps onto roof rack rails or crossbars providing elevated antenna position, benefits UHF performance with improved ground plane and 360-degree coverage. Bull bar mounting: attaches to bull bar tubes or mounting surfaces providing front-mounted antenna installation, suitable for 4WD vehicles with aftermarket protection equipment. Slotted design adjusts to various tube diameters and mounting surface configurations. Q: What does the slotted design allow? A: Slotted configuration provides adjustable mounting flexibility accommodating various installation scenarios. Benefits: adjustable antenna positioning optimizing orientation, accommodates different mounting surface dimensions, enables hardware positioning adjustments, provides installation tolerance for non-standard mounting locations. Slots allow bracket adjustment during installation ensuring proper antenna alignment and secure attachment across diverse mounting surfaces including mirrors, roof racks, and bull bars with varying dimensions. Q: What hardware is required for MM2-SS installation? A: MM2-SS mounting hardware requirements vary depending on installation location—bracket designed for universal application requiring appropriate fasteners for specific mounting surface. Mirror mounting: typically requires bolts/nuts matching mirror arm diameter or housing mounting points. Roof rack mounting: U-bolts or clamps appropriate for rack tube diameter. Bull bar mounting: U-bolts, hose clamps, or bolts matching bull bar tube diameter. Verify mounting hardware compatibility with specific application—consult local automotive fastener supplier for appropriate hardware matching your mounting location.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI TLM-1LS Heavy Duty Stainless Steel L Guard Bracket with 6mm Cable Slot - Extended 100mm Professional Fender Mount Antenna Bracket with Integrated Cable Management and Self-Drilling Hardware Achieve professional heavy-duty antenna mounting with RFI TLM-1LS Extended L Guard Bracket featuring integrated cable management—featuring robust 1.6mm stainless steel construction providing exceptional mounting strength for demanding UHF CB antenna installations, innovative 6mm cable slot enabling simplified antenna installation and superior cable management eliminating separate cable routing requirements, proven L-shaped bracket geometry providing straightforward effective mounting solution for guard installations, standard 16mm antenna mounting hole accommodating conventional UHF antenna bases with threaded stud configurations, extended 100mm length providing maximum mounting stability and versatile positioning options for challenging installations, included self-drilling screws (3 supplied) enabling secure attachment to fender panels with additional mounting point for superior bracket stability, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, natural bright metallic finish complementing chrome trim and traditional vehicle styling, universal mounting compatibility suitable for 4WD vehicles, utes, trucks, and commercial vehicles requiring extended heavy-duty antenna mounting with integrated cable management, and proven RFI quality engineering delivering reliable professional-grade antenna mounting solution for most demanding vehicle communication installations. Product Overview Heavy duty fender mount bracket. 'L' shape with cable slot. This 1.6mm heavy duty stainless steel 'L' shape fender mount bracket includes 6mm cable slot for easy antenna installation plus 3 x self drilling screws. Bracket is 100mm long with 16mm hole. Key Features Heavy-Duty 1.6mm Stainless Steel Construction - Robust 1.6mm stainless steel material provides superior mounting strength and enhanced structural rigidity for demanding antenna installations. Extended 100mm Length for Maximum Stability - Longest L-bracket option in RFI range providing maximum mounting stability and versatile positioning options for challenging installations requiring extended reach. Integrated 6mm Cable Slot for Simplified Installation - Built-in cable slot accommodates antenna coax cable routing through bracket eliminating separate cable management and providing clean professional installation. L-Shaped Bracket Geometry with 16mm Mounting Hole - Simple effective L-bracket design provides straightforward mounting solution with standard 16mm hole accommodating conventional UHF antenna bases. Three Self-Drilling Screws for Superior Security - Complete hardware package includes 3 self-drilling screws providing additional mounting point and enhanced bracket stability across extended bracket length. Professional Cable Management Integration - 6mm slot enables coax cable routing directly through bracket structure maintaining organized appearance and protecting cable from environmental exposure. Technical Specifications Specification Details Model TLM-1LS SKU TLM-1LS Brand RFI Product Type Heavy Duty Extended Fender Mount Antenna Bracket (L-Shape with Cable Slot) Material Stainless Steel Material Thickness 1.6mm (Heavy Duty) Finish Stainless Steel (natural) Design L Guard bracket with cable slot Mounting Hole 16mm (circular) Cable Slot 6mm Length 100mm Width Not specified Vehicle Compatibility Universal (4WD vehicles, utes, trucks, SUVs, commercial vehicles) Mounting Method Self-drilling screws (3 included) Drilling Required No pre-drilling (self-drilling screws penetrate fender) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Hole Function Through-bolt mounting with nut (standard 16mm antenna stud) Component Type Bracket Included Hardware 3 × Self-drilling screws Installation Type Direct fender attachment (screw mounting) Application UHF CB antenna mounting, Heavy-duty extended fender installations, Professional antenna mounting with cable management, Challenging installation scenarios Frequently Asked Questions Q: What is the difference between TLM-1LS and TLM-1S? A: TLM-1LS and TLM-1S identical in construction (both 1.6mm steel, L-shape, 6mm cable slot, 3 screws, 16mm hole)—sole difference is length. TLM-1LS 100mm extended length vs TLM-1S 75mm standard length. Extended length provides maximum mounting stability, better weight distribution across three mounting points, and versatile positioning for challenging installations. Choose TLM-1LS when maximum bracket stability required, extended reach needed, or installation benefits from longer bracket dimension. Choose TLM-1S when 75mm length adequate and more compact profile preferred. Q: What applications benefit from the extended 100mm length? A: TLM-1LS 100mm length ideal for particularly heavy or long antenna configurations requiring maximum mounting stability, installations on wide fender surfaces benefiting from extended bracket dimension, vehicles with challenging fender geometry where extended reach advantageous, professional commercial installations prioritizing absolute maximum stability. Extended length distributes mounting loads across greater surface area reducing stress concentration. Three-screw mounting across 100mm provides superior resistance to bracket flexing or movement compared to shorter brackets. Q: Is TLM-1LS too long for standard passenger vehicle installations? A: TLM-1LS 100mm extended length primarily designed for heavy-duty 4WD vehicles, trucks, and commercial applications—may be excessive for standard passenger vehicle installations. For sedans, hatchbacks, and compact vehicles, consider TLM-3 (50mm) or TLM-5 (50mm black) for appropriate proportions. TLM-1LS best suited for utes, 4WD wagons, and trucks where extended bracket length properly utilized. Verify 100mm length fits intended mounting location without interference with body panels, wheel arches, or vehicle components. Q: Does the extended length require more mounting screws? A: TLM-1LS includes same 3 self-drilling screws as TLM-1S (75mm)—extended 100mm length does not require additional screws. Three-point mounting across longer bracket provides enhanced load distribution and stability. Third screw positioned along extended bracket dimension prevents flexing at bracket ends. Installer positions three screws strategically across 100mm length ensuring secure attachment and optimal weight distribution. Verify fender area accommodates three mounting points without interference with underlying components. Q: Can TLM-1LS be cut shorter if 100mm too long? A: While physically possible to cut stainless steel bracket, modification not recommended as alters engineered design and voids warranty. Cutting affects: structural integrity and load distribution, cable slot positioning relative to antenna mounting hole, mounting screw hole positions designed for 100mm length, potential sharp edges requiring finishing. If 100mm excessive for application, purchase appropriate length bracket: TLM-1S (75mm), TLM-3 (50mm), or TLM-5 (50mm black). RFI offers multiple length options eliminating need for field modifications.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI TLM-1S Heavy Duty Stainless Steel L Guard Bracket with 6mm Cable Slot - Professional 16mm Hole Fender Mount Antenna Bracket with Integrated Cable Management and Self-Drilling Hardware Achieve professional heavy-duty antenna mounting with RFI TLM-1S L Guard Bracket featuring integrated cable management—featuring robust 1.6mm stainless steel construction providing exceptional mounting strength for demanding UHF CB antenna installations, innovative 6mm cable slot enabling simplified antenna installation and superior cable management eliminating separate cable routing requirements, proven L-shaped bracket geometry providing straightforward effective mounting solution for guard installations, standard 16mm antenna mounting hole accommodating conventional UHF antenna bases with threaded stud configurations, generous 75mm length providing enhanced mounting stability and versatile positioning options compared to compact brackets, included self-drilling screws (3 supplied) enabling secure attachment to fender panels with additional mounting point for superior bracket stability, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, natural bright metallic finish complementing chrome trim and traditional vehicle styling, universal mounting compatibility suitable for 4WD vehicles, utes, trucks, and commercial vehicles requiring heavy-duty antenna mounting with integrated cable management, and proven RFI quality engineering delivering reliable professional-grade antenna mounting solution for demanding vehicle communication installations. Product Overview Heavy duty fender mount bracket. 'L' shape with cable slot. This heavy-duty 1.6mm stainless steel 'L' shape fender mount bracket includes 6mm cable slot for easy antenna installation plus 3 x self drilling screws. Bracket is 75mm long with 16mm hole. Key Features Heavy-Duty 1.6mm Stainless Steel Construction - Robust 1.6mm stainless steel material provides superior mounting strength and enhanced structural rigidity for demanding antenna installations. Integrated 6mm Cable Slot for Simplified Installation - Built-in cable slot accommodates antenna coax cable routing through bracket eliminating separate cable management and providing clean professional installation. L-Shaped Bracket Geometry with 16mm Mounting Hole - Simple effective L-bracket design provides straightforward mounting solution with standard 16mm hole accommodating conventional UHF antenna bases. Extended 75mm Length for Enhanced Stability - Longer bracket dimension compared to compact models provides increased mounting stability and versatile positioning options for heavy-duty installations. Three Self-Drilling Screws for Superior Security - Complete hardware package includes 3 self-drilling screws providing additional mounting point and enhanced bracket stability compared to standard two-screw designs. Professional Cable Management Integration - 6mm slot enables coax cable routing directly through bracket structure maintaining organized appearance and protecting cable from environmental exposure. Technical Specifications Specification Details Model TLM-1S SKU TLM-1S Brand RFI Product Type Heavy Duty Fender Mount Antenna Bracket (L-Shape with Cable Slot) Material Stainless Steel Material Thickness 1.6mm (Heavy Duty) Finish Stainless Steel (natural) Design L Guard bracket with cable slot Mounting Hole 16mm (circular) Cable Slot 6mm Length 75mm Width Not specified Vehicle Compatibility Universal (4WD vehicles, utes, trucks, SUVs, commercial vehicles) Mounting Method Self-drilling screws (3 included) Drilling Required No pre-drilling (self-drilling screws penetrate fender) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Hole Function Through-bolt mounting with nut (standard 16mm antenna stud) Component Type Bracket Included Hardware 3 × Self-drilling screws Installation Type Direct fender attachment (screw mounting) Application UHF CB antenna mounting, Heavy-duty fender installations, Professional antenna mounting with cable management Frequently Asked Questions Q: What is the difference between TLM-1S L Guard and TLM-2S Z Guard brackets? A: TLM-1S and TLM-2S identical in heavy-duty construction (both 1.6mm steel, 75mm length, 6mm cable slot, 3 screws)—sole difference is bracket geometry. TLM-1S uses L-shaped design providing simple 90-degree angle mounting, TLM-2S uses Z-shaped design providing offset mounting positioning antenna away from fender surface. Choose TLM-1S for straightforward mounting where simple vertical positioning adequate. Choose TLM-2S when antenna offset from mounting surface beneficial or additional clearance required. Q: How does TLM-1S compare to TLM-3 standard L Guard bracket? A: TLM-1S heavy-duty version with 1.6mm steel (vs TLM-3's 1.5mm), 75mm length (vs 50mm), 6mm cable slot (TLM-3 has none), and 3 screws (vs 2). TLM-1S provides superior strength, integrated cable management, and enhanced stability for demanding applications. TLM-3 compact lightweight option for standard installations. Choose TLM-1S for commercial/professional installations, heavy antennas, or when cable management feature desired. Choose TLM-3 for recreational use, standard antennas, or compact bracket preference. Q: Why does the cable slot simplify antenna installation? A: 6mm cable slot enables antenna coax routing directly through bracket during installation—eliminates separate cable management step. Thread cable through slot before mounting antenna, cable automatically positioned and protected along bracket length. Benefits: reduces installation time, maintains organized professional appearance, shields cable from UV exposure and weather, prevents cable movement and chafing. Standard RG58 or RG8X cables (5-6mm diameter) fit comfortably through slot. Q: What applications benefit from TLM-1S heavy-duty construction? A: TLM-1S 1.6mm construction ideal for commercial fleet vehicles requiring maximum durability, heavy-duty 4WD vehicles in severe off-road conditions, long or heavy antenna configurations (8+ feet), professional installations where bracket failure unacceptable. Extended 75mm length with 3-screw mounting provides superior stability compared to compact brackets. Choose when maximum bracket strength and reliability required over weight or cost optimization. Q: Can TLM-1S be used for trunk lip mounting like TLM-5? A: Yes—TLM-1S L-shaped geometry suitable for trunk lip mounting where 90-degree edge provides ideal surface. However, 75mm length and 1.6mm heavy-duty construction may be excessive for typical passenger vehicle trunk applications. TLM-1S better suited for guard/fender mounting on 4WD vehicles and trucks. For trunk lip mounting on sedans/hatchbacks, consider TLM-5 or TLM-3 with more appropriate 50mm compact length and lighter construction.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI TLM-2-BT50 Heavy Duty Stainless Steel Z Guard Bracket with 6mm Slot - Vehicle-Specific Black Powder-Coated 16mm Hole Fender Mount for Mazda BT-50 with Built-In Compensating Angle and Professional Antenna Mounting Achieve professional antenna mounting on Mazda BT-50 with RFI TLM-2-BT50 Z Guard Bracket featuring vehicle-specific compensating angle—featuring robust 1.5mm stainless steel construction providing durable corrosion-resistant mounting platform for UHF CB antennas and communication equipment, vehicle-specific compensating angle design engineered exclusively for Mazda BT-50 front left-hand fender fitment eliminating custom bracket bending requirements, innovative Z-shaped bracket profile offsetting antenna away from bodywork preventing interference and providing optimal mounting geometry, professional black powder-coated finish providing enhanced corrosion protection and discreet appearance matching modern BT-50 styling, integrated 6mm cable slot enabling simplified antenna installation and superior cable management eliminating separate cable routing requirements, standard 16mm antenna mounting hole accommodating conventional UHF antenna bases with threaded stud configurations, 60mm length providing balanced mounting stability and versatile positioning options for BT-50 guard contours, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, universal UHF antenna compatibility suitable for spring bases and fixed-mount configurations, and proven RFI quality engineering delivering reliable vehicle-specific antenna mounting solution for Australia's popular Mazda BT-50 mid-size 4WD ute. Product Overview Stainless steel fender mount bracket. 'Z' shape with compensating angle for Mazda BT-50. This 1.5mm stainless steel 'Z' shape fender mount bracket is designed with a compensating angle for Mazda BT-50 for mounting on the front left hand fender. Bracket powder coated black and is 60mm long with 16mm hole. Key Features Vehicle-Specific Compensating Angle Design for Mazda BT-50 - Engineered compensating angle specifically matched to Mazda BT-50 front left-hand fender geometry ensuring proper vertical antenna mounting without custom bracket modifications. Professional Black Powder-Coated Finish - Durable black coating provides enhanced corrosion protection and discreet appearance complementing Mazda BT-50 modern styling and dark-colored vehicle aesthetics. Heavy-Duty 1.5mm Stainless Steel Construction - Robust stainless steel material provides substantial mounting strength supporting UHF antennas during vehicle operation while maintaining corrosion resistance for long-term reliability. Integrated 6mm Cable Slot for Simplified Installation - Built-in cable slot accommodates antenna coax cable routing through bracket eliminating separate cable management and providing clean professional installation. Z-Shaped Bracket Profile with 16mm Mounting Hole - Proven Z-bracket geometry offsets antenna mounting position away from fender surface providing clearance for antenna connections and optimal radio performance. Optimized 60mm Length for BT-50 Fitment - Length dimension engineered specifically for Mazda BT-50 guard contours providing secure mounting while maintaining proper positioning on front left-hand fender. Technical Specifications Specification Details Model TLM-2-BT50 SKU TLM-2-BT50 Brand RFI Product Type Vehicle-Specific Fender Mount Antenna Bracket (Z-Shape with Compensating Angle and Cable Slot) Material Stainless Steel Material Thickness 1.5mm Finish Black (Powder-Coated) Design Z Guard bracket with compensating angle and cable slot Mounting Hole 16mm (circular) Cable Slot 6mm Length 60mm Width Not specified Compensating Angle Built-in angle compensation for Mazda BT-50 fender surface Installation Position Front Left-Hand Fender Vehicle Compatibility Mazda BT-50 (vehicle-specific) Mounting Method Self-drilling screws (quantity not specified) Drilling Required Verify mounting method for BT-50 application Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Hole Function Through-bolt mounting with nut (standard 16mm antenna stud) Component Type Bracket Installation Type Front left fender attachment (Mazda BT-50 specific) Fender Angle Compensation Automatic (pre-engineered for BT-50 geometry) Application Mazda BT-50 UHF CB antenna mounting, Front left guard installation, BT-50 communication equipment installation Frequently Asked Questions Q: Will TLM-2-BT50 fit other vehicles besides Mazda BT-50? A: TLM-2-BT50 specifically engineered for Mazda BT-50 front left-hand fender—not recommended for other vehicles. Compensating angle matched to BT-50 fender geometry may not provide proper antenna orientation on other vehicle fenders. Mazda BT-50 and Ford Ranger T6 share platform architecture during certain model years potentially enabling cross-compatibility, however RFI offers dedicated TLM-FR for Ranger applications. For other vehicles: TLM-7 universal compensating angle bracket suitable for various vehicles, TLM-4 universal Z-bracket without compensating angle, TLM-HL-L vehicle-specific for Toyota Hilux 2016+. Purchase vehicle-specific brackets for optimal fitment, use universal brackets when vehicle-specific option unavailable. Q: How does TLM-2-BT50 compare to TLM-7 universal compensating angle bracket? A: TLM-2-BT50 vehicle-specific for Mazda BT-50 front left fender with 1.5mm steel, black powder-coated finish, 6mm cable slot, and 60mm length. TLM-7 universal design for various vehicles (front left or rear right fender) with 1.4mm steel, natural stainless finish, no cable slot, and 50mm length. Choose TLM-2-BT50 for Mazda BT-50 installation prioritizing vehicle-specific fitment and integrated cable management. Choose TLM-7 for non-BT-50 vehicles or when dual-position mounting flexibility required. Q: What Mazda BT-50 model years does TLM-2-BT50 fit? A: TLM-2-BT50 designed for Mazda BT-50 application—specific model year compatibility depends on fender design consistency. Most suitable for second-generation BT-50 (2011-2020) sharing platform with Ford Ranger. Third-generation BT-50 (2020-present) based on Isuzu D-Max platform may require fitment verification. Verify compatibility with specific BT-50 model year before purchase by measuring fender surface angle, test-fitting bracket, or consulting RFI technical support. Consider universal brackets (TLM-7) if vehicle-specific compatibility uncertain. Q: Does the 6mm cable slot work with all antenna cable types? A: TLM-2-BT50 6mm cable slot accommodates standard UHF CB antenna coax cables: RG58 (approximately 5mm diameter) and RG8X (approximately 6mm diameter) fit comfortably. PL259 connectors (15-20mm diameter) exceed slot width—thread bare cable through slot before terminating with connector. Installation options: pre-thread cable through slot before mounting bracket, or mount bracket first then thread cable through. Slot provides cable protection from UV exposure and environmental elements while maintaining organized professional appearance. Use standard RG58 or RG8X cables for guaranteed compatibility. Q: Can TLM-2-BT50 be mounted on right-hand fender instead of left? A: No—TLM-2-BT50 specifically designed for front left-hand fender with directional compensating angle. Right fender mounting not recommended as compensating angle engineered for left fender geometry will not provide proper antenna orientation on right side. Left fender provides most common installation configuration with convenient cable routing to driver-area radio. For right fender mounting: contact RFI for right-hand version if available, use universal brackets (TLM-4) with custom bending, or consider alternative mounting positions (roof, bull bar). Use TLM-2-BT50 on front left fender as designed for optimal results.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI TLM-3 Stainless Steel L Guard Bracket - Universal 16mm Hole Guard Mount Antenna Bracket with L-Shape Design and Self-Drilling Hardware for UHF CB Antenna Installation Achieve straightforward professional antenna mounting with RFI TLM-3 Stainless Steel L Guard Bracket—featuring heavy-duty 1.5mm stainless steel construction providing robust corrosion-resistant mounting platform for UHF CB antennas and communication equipment, proven L-shaped bracket geometry providing simple effective mounting solution for guard installations, standard 16mm antenna mounting hole accommodating conventional UHF antenna bases with threaded stud configurations, included self-drilling screws (2 supplied) enabling direct attachment to guard panels or mounting surfaces without pre-drilling holes, compact 50mm length maintaining low-profile appearance while providing secure antenna support, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, natural bright metallic finish complementing chrome trim and traditional vehicle styling, universal mounting compatibility suitable for 4WD vehicles, utes, trucks, sedans, hatchbacks, and commercial vehicles requiring L-bracket antenna mounting, versatile installation suitable for guard mounting, trunk lip mounting, or alternative mounting locations where L-bracket geometry beneficial, and proven RFI quality engineering delivering reliable antenna mounting solution for diverse vehicle communication installations. Product Overview Stainless steel guard mount bracket. 'L' shape. This 1.5mm stainless steel 'L' shape guard mount bracket includes 2 x self drilling screws. Bracket is 50mm long with 16mm hole. Key Features Heavy-Duty 1.5mm Stainless Steel Construction - Professional-grade stainless steel provides substantial mounting strength supporting UHF antennas during vehicle operation while maintaining corrosion resistance for long-term reliability. L-Shaped Bracket Geometry with 16mm Mounting Hole - Simple effective L-bracket design provides straightforward mounting solution with standard 16mm hole accommodating conventional UHF antenna bases. Included Self-Drilling Screws for Direct Attachment - Complete hardware package includes 2 self-drilling screws enabling direct bracket attachment to metal surfaces without pre-drilling pilot holes. Compact 50mm Length Design - Short bracket length maintains minimal visual intrusion while providing secure antenna mounting platform suitable for diverse vehicle applications. Natural Stainless Steel Finish - Bright metallic stainless steel appearance maintains professional aesthetic complementing chrome trim and traditional vehicle styling without additional coating. Universal Mounting Compatibility - Versatile L-bracket design suitable for guard mounting, trunk lip installations, or alternative mounting locations where 90-degree bracket geometry beneficial. Technical Specifications Specification Details Model TLM-3 SKU TLM-3 Brand RFI Product Type Guard Mount Antenna Bracket (L-Shape) Material Stainless Steel Material Thickness 1.5mm Finish Stainless Steel (natural) Design L Guard bracket Mounting Hole 16mm (circular) Length 50mm Width Not specified Height Not specified Vehicle Compatibility Universal (4WD vehicles, utes, trucks, SUVs, sedans, hatchbacks, commercial vehicles) Mounting Method Self-drilling screws (2 included) Drilling Required No pre-drilling (self-drilling screws penetrate surface) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Hole Function Through-bolt mounting with nut (standard 16mm antenna stud) Component Type Bracket Included Hardware 2 × Self-drilling screws Installation Type Direct surface attachment (screw mounting) Application UHF CB antenna mounting, Guard installations, Trunk lip mounting, Universal vehicle antenna mounting Frequently Asked Questions Q: What is the difference between TLM-3 L Guard and TLM-4 Z Guard brackets? A: TLM-3 and TLM-4 differ primarily in bracket geometry—TLM-3 features simple L-shaped design while TLM-4 uses Z-shaped bracket providing offset mounting. Material comparison: TLM-3 uses 1.5mm stainless steel providing slightly heavier construction, TLM-4 uses 1.4mm stainless steel with marginally thinner material, both thicknesses adequate for UHF antenna mounting applications. Bracket geometry differences: L-shaped design provides 90-degree angle mounting positioning antenna perpendicular to mounting surface with minimal offset, Z-shaped design creates compound offset positioning antenna away from mounting surface with forward or backward displacement. Application suitability: L Guard (TLM-3) ideal for straightforward mounting where simple vertical antenna positioning adequate, simpler installation with less complex bracket orientation, suitable for guard mounting, trunk lip mounting, or body panel installations where 90-degree bracket appropriate. Z Guard (TLM-4) beneficial when antenna must be offset from mounting surface, useful for clearing body panel contours or positioning antenna specific distance from surface, more complex geometry potentially providing enhanced clearance for connections and cable routing. Dimensional specifications: both brackets feature identical 50mm length and 16mm mounting hole, same self-drilling screw hardware (2 included), similar compact proportions maintaining low-profile appearance. Selection criteria: choose TLM-3 L Guard for straightforward mounting applications, installations where simple 90-degree bracket geometry adequate, vehicles where traditional L-bracket design preferred. Choose TLM-4 Z Guard when offset mounting beneficial, installations requiring antenna positioned away from mounting surface, situations where Z-bracket geometry provides installation advantages. Both brackets deliver reliable mounting performance with choice based on specific installation requirements and desired antenna positioning. Q: What is the difference between TLM-3 and TLM-5? A: TLM-3 and TLM-5 identical in all structural dimensions, bracket geometry, and mounting design—sole difference is finish with TLM-3 featuring natural stainless steel finish and TLM-5 featuring black powder-coated finish. Functional specifications: both brackets feature same 1.5mm stainless steel core material, identical L-shaped bracket design, same 50mm length dimension, equivalent 16mm mounting hole, and identical self-drilling screw hardware (2 included). Finish comparison: TLM-3 natural stainless steel finish provides traditional bright metallic appearance complementing chrome trim and traditional vehicle styling, no coating applied maintaining bare stainless surface resisting corrosion through material properties. TLM-5 black powder-coated finish provides enhanced corrosion protection and discreet appearance ideal for dark-colored vehicles or installations prioritizing subtle aesthetics, coating adds minimal thickness while improving environmental resistance. Performance equivalence: both brackets deliver identical mounting strength, antenna support capability, and long-term durability, finish selection purely aesthetic preference without functional performance differences. Selection criteria: choose TLM-3 for traditional stainless steel appearance, vehicles with chrome or bright trim where metallic finish complements existing styling, installations where bright metallic bracket desired, classic aesthetic preferences. Choose TLM-5 for black or dark-colored vehicles where matching finish desired, professional installations prioritizing subtle appearance, enhanced corrosion protection in harsh coastal or industrial environments, modern aesthetic preferences favoring black finishes. Pricing typically similar between models with finish selection based on aesthetic preferences rather than functional requirements. Installation procedures identical: same mounting method, same hardware, same installation approach regardless of finish selection, interchangeable application suitability for guard mounting, trunk lip mounting, or alternative installations. Q: Can TLM-3 be used for trunk lip mounting like TLM-5? A: Yes—TLM-3 and TLM-5 functionally identical brackets with only finish difference, TLM-3 equally suitable for trunk lip mounting applications as TLM-5. Application versatility: L-shaped bracket geometry specifically well-suited for trunk lip mounting where 90-degree edge provides ideal mounting surface, 50mm length and compact proportions appropriate for typical trunk lip dimensions, 16mm hole accommodates standard UHF antenna bases common in passenger vehicle installations. Trunk lip mounting procedure: position bracket on trunk lip edge with L-shape engaging lip profile, hold bracket firmly maintaining proper orientation, install first self-drilling screw through bracket into trunk lip material, verify bracket position and alignment, install second self-drilling screw securing bracket to trunk lip. Finish considerations for trunk mounting: TLM-3 natural stainless steel finish visible on trunk installation, appearance suitable for vehicles with chrome trim or bright metallic styling, stainless finish maintains professional appearance on sedans, hatchbacks, and wagons. TLM-5 black finish may provide more discreet appearance on dark-colored vehicles, enhanced corrosion protection beneficial for trunk installations exposed to road spray and environmental conditions. Vehicle compatibility: both brackets suitable for sedans, hatchbacks, and wagons requiring trunk lip antenna mounting, L-bracket design proven effective for boot lid edge installations, compact dimensions maintain minimal visual impact on passenger vehicle appearance. Selection between TLM-3 and TLM-5 for trunk mounting: choose TLM-3 when stainless steel finish preferred or vehicle features bright trim, choose TLM-5 when black finish desired for dark-colored vehicles or subtle appearance priority, both brackets deliver identical functional performance for trunk lip mounting. Installation success factors regardless of finish: verify trunk lip thickness adequate for self-drilling screw attachment (typically 0.8-1.5mm), ensure trunk operation not compromised by bracket and antenna installation, plan cable routing from trunk through cabin to radio installation, consider paintwork protection measures preventing bracket contact damage during trunk operation. Q: What mounting surfaces are suitable for TLM-3 L Guard bracket? A: TLM-3 L Guard bracket suitable for various mounting surfaces where 90-degree L-bracket geometry provides appropriate antenna positioning—versatile design applicable to multiple installation scenarios. Primary applications—guard mounting: vehicle guards/fenders on 4WD vehicles, utes, trucks, and SUVs, guard edge or lip providing 90-degree mounting surface matching L-bracket geometry, positions antenna on front or rear guards based on radio placement preferences. Trunk lip mounting: sedan, hatchback, and wagon boot lid lip edges, trunk lip provides ideal 90-degree edge surface for L-bracket engagement, compact 50mm length appropriate for passenger vehicle trunk installations. Alternative mounting surfaces potentially compatible: door jamb edges with 90-degree profiles matching L-bracket geometry, body panel edges or flanges with suitable angles and structural support, tailgate lips on wagons and SUVs with appropriate edge configurations, mounting surfaces with perpendicular edge profiles accommodating L-shaped bracket attachment. Surface requirements for successful installation: 90-degree or near-90-degree edge angle matching L bracket geometry, adequate material thickness supporting self-drilling screw attachment (typically 0.8-1.5mm sheet metal), sufficient edge width engaging bracket mounting surface, structural integrity supporting antenna weight and wind loading during vehicle operation. Unsuitable surfaces: flat body panels without edge profiles (require Z-bracket designs like TLM-4 or compensating angle brackets like TLM-7), surfaces with acute or obtuse angles not matching L bracket 90-degree geometry, thin flexible panels lacking structural support for secure mounting, areas where antenna interferes with vehicle operation or occupant safety. Installation location considerations: verify mounting location provides adequate ground plane for UHF antenna performance, ensure cable routing from antenna to radio installation practical and protected, assess aesthetic impact of bracket and antenna placement on vehicle appearance, consider accessibility for installation and future maintenance or antenna replacement. Professional recommendation: evaluate specific mounting surface characteristics ensuring L-bracket geometry appropriate, test-fit bracket on intended surface verifying proper engagement and antenna positioning, if surface angles deviate significantly from 90 degrees consider alternative bracket designs, consult RFI product catalog for brackets specifically engineered for unusual mounting applications requiring different geometries. Q: What is the material thickness difference between TLM-3 (1.5mm) and TLM-4 (1.4mm)? A: TLM-3 features 1.5mm stainless steel thickness compared to TLM-4's 1.4mm—representing 0.1mm (approximately 7%) material thickness difference with practical implications for specific applications. Material thickness comparison: 1.5mm provides slightly greater structural rigidity and mounting strength, 1.4mm adequate for standard UHF CB antenna installations with marginal weight savings, both thicknesses considered heavy-duty construction suitable for automotive antenna mounting. Strength considerations: 0.1mm difference provides marginally increased bending resistance in TLM-3, additional thickness may benefit installations subject to extreme vibration or heavy-duty antenna applications, practical strength difference minimal for standard UHF CB antennas (3-7 feet typical length). Weight implications: TLM-3 slightly heavier due to increased material thickness, weight difference negligible for bracket applications (typically few grams), both brackets lightweight enough not affecting vehicle weight distribution or fuel economy. Bending and modification: 1.5mm material slightly more resistant to custom bending if installation requires bracket modification, 1.4mm marginally easier to bend for custom angle adjustments, both thicknesses workable using proper metalworking techniques if modifications needed. Corrosion resistance: both use stainless steel with equivalent corrosion resistance regardless of thickness, material composition more important than thickness for environmental durability, proper coating or finish (like TLM-5/TLM-6 black finish) enhances corrosion protection more than marginal thickness increase. Application selection: thickness difference generally not primary selection criterion between brackets, bracket geometry (L-shape vs Z-shape) more important consideration for installation suitability, choose TLM-3 if marginally heavier construction preferred or L-bracket geometry required, choose TLM-4 if Z-bracket offset needed regardless of 0.1mm thickness difference. Cost implications: material thickness may affect pricing but difference typically minimal, selection based primarily on bracket geometry and finish rather than thickness specifications. Professional perspective: both thickness specifications adequate for standard automotive UHF antenna installations, 0.1mm difference falls within normal manufacturing tolerance ranges, installers consider bracket geometry and mounting method more critical than marginal thickness variations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI TLM-4 Stainless Steel Z Guard Bracket - Universal 16mm Hole Fender Mount with Professional Z-Offset Design and Self-Drilling Hardware for UHF CB Antenna Installation Achieve professional antenna mounting with RFI TLM-4 Stainless Steel Z Guard Bracket—featuring heavy-duty 1.4mm stainless steel construction providing robust corrosion-resistant mounting platform for UHF CB antennas and communication equipment, proven Z-shaped bracket profile offsetting antenna away from bodywork preventing interference and providing optimal mounting geometry, standard 16mm antenna mounting hole accommodating conventional UHF antenna bases with threaded stud configurations, included self-drilling screws (2 supplied) enabling direct attachment to fender panels or mounting surfaces without pre-drilling holes, compact 50mm length maintaining low-profile appearance while providing secure antenna support, professional-grade stainless steel resisting rust and corrosion in Australian coastal and outback environments, natural bright metallic finish complementing chrome trim and traditional vehicle styling, universal mounting compatibility suitable for 4WD vehicles, utes, trucks, and commercial vehicles requiring Z-offset antenna mounting, versatile installation suitable for fender mounting, body panels, or alternative mounting locations where Z-bracket offset beneficial, and proven RFI quality engineering delivering reliable antenna mounting solution for diverse vehicle communication installations. Product Overview Stainless steel fender mount bracket. 'Z' shape. This 1.4mm stainless steel 'Z' shape fender mount bracket includes 2 x self drilling screws. Bracket is 50mm long with 16mm hole. Key Features Heavy-Duty 1.4mm Stainless Steel Construction - Professional-grade stainless steel provides substantial mounting strength supporting UHF antennas during vehicle operation while maintaining corrosion resistance for long-term reliability. Z-Shaped Bracket Profile with 16mm Mounting Hole - Proven Z-bracket geometry offsets antenna mounting position away from surface providing clearance for antenna connections and optimal radio performance. Included Self-Drilling Screws for Direct Attachment - Complete hardware package includes 2 self-drilling screws enabling direct bracket attachment to metal surfaces without pre-drilling pilot holes. Compact 50mm Length Design - Short bracket length maintains minimal visual intrusion while providing secure antenna mounting platform suitable for diverse vehicle applications. Natural Stainless Steel Finish - Bright metallic stainless steel appearance maintains professional aesthetic complementing chrome trim and traditional vehicle styling without additional coating. Universal Mounting Compatibility - Versatile Z-bracket design suitable for fender mounting, body panel installations, or alternative mounting locations where offset geometry beneficial. Technical Specifications Specification Details Model TLM-4 SKU TLM-4 Brand RFI Product Type Fender Mount Antenna Bracket (Z-Shape) Material Stainless Steel Material Thickness 1.4mm Finish Stainless Steel (natural) Design Z Guard bracket Mounting Hole 16mm (circular) Length 50mm Width Not specified (compact proportions) Vehicle Compatibility Universal (4WD vehicles, utes, trucks, SUVs, commercial vehicles) Mounting Method Self-drilling screws (2 included) Drilling Required No pre-drilling (self-drilling screws penetrate surface) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Hole Function Through-bolt mounting with nut (standard 16mm antenna stud) Component Type Bracket Included Hardware 2 × Self-drilling screws Installation Type Direct surface attachment (screw mounting) Application UHF CB antenna mounting, Fender installations, Universal vehicle antenna mounting Frequently Asked Questions Q: What is the difference between TLM-4 and TLM-7? A: TLM-4 and TLM-7 both feature Z-shaped bracket design with identical 1.4mm stainless steel construction and 50mm length—key difference is TLM-7 includes built-in compensating angle while TLM-4 standard Z-bracket without angle compensation. Compensating angle feature: TLM-7 engineered with offset angle (typically 10-15 degrees) specifically designed for front left or rear right fender installations where fender surface angles require compensation, bracket geometry automatically positions antenna vertically on angled fender surfaces. TLM-4 standard design: conventional Z-bracket providing offset mounting without compensating angle, suitable for relatively flat or perpendicular mounting surfaces, installer may perform custom bending if specific angle adjustment required. Application differences: TLM-7 optimized for angled fender mounting applications where compensating angle eliminates custom bracket modification, specific front left/rear right fender position design. TLM-4 provides universal Z-offset mounting suitable for various flat or near-flat surfaces, versatile installation locations not requiring pre-engineered angle compensation. Selection criteria: choose TLM-7 when installing on front left or rear right fenders with pronounced surface angles, installations benefiting from automatic angle compensation eliminating custom bracket bending. Choose TLM-4 for flat or near-flat mounting surfaces, installations where universal Z-offset adequate without compensating angle, situations where installer may customize bracket angle for specific application. Both brackets deliver reliable mounting performance with identical material specifications and hardware—difference primarily installation-specific angle compensation feature. Q: What is the difference between TLM-4 and TLM-6? A: TLM-4 and TLM-6 identical in all structural dimensions and mounting design—sole difference is finish with TLM-4 featuring natural stainless steel finish and TLM-6 featuring black powder-coated finish. However, dimensional specifications differ: TLM-4 compact 50mm length design with 1.4mm thickness, TLM-6 larger 8-inch length with 3-inch width and height proportions. Functional specifications: both brackets feature stainless steel core material, Z-shaped bracket geometry providing offset mounting, 16mm mounting hole accommodating standard UHF antenna bases. Finish comparison: TLM-4 natural stainless steel finish provides traditional bright metallic appearance complementing chrome trim and traditional styling, no coating applied maintaining bare stainless surface. TLM-6 black powder-coated finish provides enhanced corrosion protection and discreet appearance ideal for dark-colored vehicles or modern aesthetic preferences. Size comparison: TLM-4 compact 50mm bracket suitable for standard fender mounting, minimal visual impact. TLM-6 larger dimensions (8-inch length) provide potentially greater mounting stability and trunk lip engagement. Application differences: TLM-4 typically used for fender mounting on 4WD vehicles, utes, and trucks requiring compact Z-offset bracket. TLM-6 specifically designed for trunk lip mounting on sedans, hatchbacks, and wagons. Selection criteria: choose TLM-4 for fender mounting applications, vehicles with chrome or bright trim where stainless finish preferred, compact bracket installations. Choose TLM-6 for trunk lip mounting, dark-colored vehicles, installations prioritizing black finish aesthetic. Both provide reliable mounting with choice based on application type and finish preference. Q: Can TLM-4 be bent or modified for specific angle requirements? A: Yes—TLM-4 1.4mm stainless steel construction provides adequate malleability for careful custom bending when specific installation requires angle modifications beyond standard Z-bracket geometry. Material workability: 1.4mm thickness balances mounting strength with bendability, stainless steel can be bent using proper metalworking techniques, bracket modification possible for installers with appropriate tools and experience. Bending procedures: use bench vise or metal brake for controlled bending, apply gradual pressure avoiding sharp bends potentially cracking material, support bracket properly preventing unintended deformation, make small incremental adjustments testing fitment between bending operations. Recommended bending scenarios: fine-tuning bracket angle for specific fender surface orientation, adjusting Z-offset distance for particular antenna positioning requirements, compensating for unusual vehicle body panel angles, customizing mounting geometry for non-standard applications. Bending limitations: excessive bending weakens bracket structural integrity, sharp bends risk material cracking or fracture, multiple bending operations increase stress potentially compromising long-term reliability, complex angle requirements may exceed practical bending capabilities. Professional considerations: experienced installers routinely perform minor bracket modifications achieving optimal antenna positioning, automotive fabrication shops can provide custom bending services if DIY modification uncertain, test bracket fitment before final antenna installation verifying modifications achieve desired result. Alternative approaches: if extensive modification required, consider alternative RFI bracket models potentially better suited to application (such as TLM-7 with compensating angle for angled fenders), multiple brackets available with different geometries potentially eliminating custom bending requirements. Warranty considerations: custom modification typically voids manufacturer warranty, bracket performance after modification installer responsibility, improper bending may compromise bracket integrity requiring replacement. Recommendation: perform minimal necessary modification for specific installation, use proper metalworking tools and techniques, if modification complexity exceeds comfort level consider professional installation or alternative bracket design. Q: What mounting surfaces are suitable for TLM-4? A: TLM-4 Z Guard bracket suitable for various mounting surfaces where Z-offset geometry provides appropriate antenna positioning—primarily designed for fender mounting but adaptable to alternative locations. Primary application—fender mounting: vehicle fenders on 4WD vehicles, utes, trucks, and SUVs, flat or near-flat fender surfaces not requiring compensating angle (unlike TLM-7), positions antenna on front or rear fenders based on radio placement and cable routing preferences. Alternative mounting surfaces potentially compatible: body panels with adequate structural support and material thickness, door jambs or door edges where Z-offset positions antenna appropriately, firewall or bulkhead surfaces for engine bay or interior mounting scenarios, cargo bed sides on utes and trucks where offset beneficial. Surface requirements for successful installation: adequate material thickness supporting self-drilling screw attachment (typically 0.8-1.5mm sheet metal), structural integrity supporting antenna weight and wind loading during vehicle operation, flat or near-perpendicular surface matching standard Z-bracket geometry without extreme angles, clearance for antenna and bracket without interference with vehicle operation or components. Unsuitable surfaces: angled fenders requiring compensating angle (use TLM-7 instead), thin flexible panels lacking structural support for secure mounting, areas with underlying critical components (wiring, fuel lines, brake lines) where screw penetration dangerous, surfaces subject to excessive flexing or vibration potentially loosening bracket attachment. Installation location considerations: verify mounting location provides adequate ground plane for UHF antenna performance, ensure cable routing from antenna to radio installation practical and protected, assess aesthetic impact of bracket and antenna placement on vehicle appearance, consider accessibility for installation and future maintenance or antenna replacement. Professional recommendation: evaluate specific mounting surface characteristics before purchase ensuring TLM-4 geometry appropriate, test-fit bracket on intended surface verifying proper engagement and antenna positioning, if surface angles require compensation consider TLM-7 with built-in angle adjustment, consult RFI product catalog for alternative brackets potentially better suited for specific mounting applications. Q: Do I need to pre-drill holes for the self-drilling screws? A: No—self-drilling screws included with TLM-4 designed penetrating sheet metal surfaces without pre-drilling pilot holes. Self-drilling screw operation: hardened screw point functions as drill bit penetrating metal, integrated cutting flutes clear metal chips during penetration, screw threads engage material after initial penetration creating secure attachment. Installation procedure without pre-drilling: position bracket on mounting surface at desired location, hold bracket firmly maintaining proper orientation and position, use power drill or impact driver with appropriate bit (Phillips or hex depending on screw head), apply firm pressure while driving first screw ensuring bracket remains positioned correctly, screw penetrates surface creating mounting hole and threading into material simultaneously, install second screw completing bracket attachment. Power tool recommendations: cordless drill with adjustable clutch or impact driver preferred for controlled screw installation, adequate power for penetrating sheet metal without excessive force, variable speed control enabling gradual penetration for precise positioning. Installation tips: start screws at slow speed ensuring accurate positioning, increase speed once screw engages material, maintain perpendicular screw angle to surface, avoid over-tightening potentially stripping threads in thin sheet metal. Surface material considerations: self-drilling screws suitable for typical automotive sheet metal (0.8-1.5mm steel or aluminum), thicker materials may require pre-drilling despite self-drilling screw design, very thin materials risk damage from aggressive self-drilling action. Alternative if pre-drilling preferred: drill pilot holes using bit slightly smaller than screw diameter, pilot holes guide screw installation and reduce penetration force, particularly useful for precise positioning or difficult materials. Screw replacement if needed: self-drilling screws available from hardware stores or automotive fastener suppliers, specify sheet metal self-drilling screws with appropriate length and head type, stainless steel or corrosion-resistant coating recommended matching bracket material.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI TLM-5 Black Stainless Steel L Guard Bracket - Universal 16mm Hole Trunk Lip Mount Antenna Bracket with Professional Black Finish and Self-Drilling Hardware for Sedan, Hatchback, and Wagon UHF CB Installation Achieve professional trunk lip antenna mounting with RFI TLM-5 Black Stainless Steel L Guard Bracket—featuring durable black powder-coated finish providing enhanced corrosion resistance and discreet low-profile appearance matching modern vehicle aesthetics, heavy-duty 1.5mm stainless steel construction ensuring robust mounting platform for UHF CB antennas and communication equipment, proven L-shaped bracket geometry providing simple effective mounting solution for trunk lip installations, standard 16mm antenna mounting hole accommodating conventional UHF antenna bases with threaded stud configurations, trunk lip mount design specifically engineered for sedan, hatchback, and wagon boot lid installations eliminating drilling holes in vehicle bodywork, included self-drilling screws (2 supplied) enabling direct attachment to trunk lip without pre-drilling holes, compact 50mm length maintaining minimal visual impact while providing secure antenna support, professional black finish complementing dark-colored vehicles and blending seamlessly with modern automotive styling, corrosion-resistant coating protecting against Australian coastal salt spray and harsh environmental conditions, universal vehicle compatibility suitable for passenger vehicles requiring trunk-mounted antenna solutions, and proven RFI quality engineering delivering reliable trunk lip antenna mounting solution for passenger vehicle communication installations. Product Overview Trunk Lip Mount BLACK. Identical to TLM-3 except black. The TLM-5 1.5mm Black stainless steel 'L' shape fender mount bracket includes 2 x self drilling screws. Bracket is 50mm long with 16mm hole. Key Features Professional Black Powder-Coated Finish - Durable black coating provides enhanced corrosion resistance, subtle low-profile appearance, and professional aesthetic matching modern vehicle styling. Heavy-Duty 1.5mm Stainless Steel Construction - Robust stainless steel material provides substantial mounting strength supporting UHF antennas during vehicle operation while maintaining corrosion resistance for long-term reliability. L-Shaped Bracket Geometry - Simple effective L-bracket design provides straightforward trunk lip mounting solution without complex offset geometry required for fender installations. Standard 16mm Mounting Hole - Accommodates conventional UHF antenna bases with threaded stud configurations ensuring compatibility with most aftermarket CB antennas. Included Self-Drilling Screws for Direct Attachment - Complete hardware package includes 2 self-drilling screws enabling direct bracket attachment to trunk lip without pre-drilling pilot holes. Compact 50mm Length Design - Short bracket length maintains minimal visual intrusion while providing secure antenna mounting platform suitable for passenger vehicle trunk installations. Technical Specifications Specification Details Model TLM-5 SKU TLM-5 Brand RFI Product Type Trunk Lip Mount Antenna Bracket (L Guard Design) Material Stainless Steel Material Thickness 1.5mm Finish Black (Powder-Coated) Design L Guard bracket Mounting Hole 16mm (circular) Length 50mm Width Not specified Height Not specified Mounting Method Trunk lip mount with self-drilling screws (2 included) Drilling Required No pre-drilling (self-drilling screws penetrate trunk lip) Vehicle Compatibility Universal (sedans, hatchbacks, wagons, passenger vehicles) Antenna Compatibility Standard UHF CB antennas, Spring base antennas, Fixed mount antennas Hole Function Through-bolt mounting with nut (standard 16mm antenna stud) Component Type Bracket Included Hardware 2 × Self-drilling screws Installation Type Trunk lip attachment (screw mounting) Corrosion Protection Black powder-coated finish over stainless steel Comparison Identical to TLM-3 except black finish Application UHF CB antenna mounting, Trunk lip installations, Passenger vehicle antenna mounting Frequently Asked Questions Q: What is the difference between TLM-5 L Guard and TLM-6 Z Guard brackets? A: TLM-5 and TLM-6 both feature black powder-coated finish for trunk lip mounting but differ in bracket geometry and dimensional specifications. Bracket design comparison: TLM-5 uses L-shaped bracket geometry providing simple 90-degree angle mounting, TLM-6 uses Z-shaped bracket geometry providing offset mounting positioning antenna away from trunk surface. Dimensional differences: TLM-5 compact 50mm length with 1.5mm material thickness, TLM-6 larger 8-inch length with 3-inch width and height proportions. Mounting hole specifications: both brackets feature 16mm circular hole accommodating standard UHF antenna bases, identical antenna compatibility and mounting method. Application suitability: TLM-5 L Guard design suited for straightforward trunk lip installations requiring minimal offset, simpler installation with less complex geometry, suitable for most sedan and hatchback applications. TLM-6 Z Guard design provides greater offset distance between trunk surface and antenna, useful when additional clearance required, larger dimensions provide potentially greater mounting stability. Hardware inclusion: TLM-5 includes 2 self-drilling screws for direct installation, TLM-6 mounting hardware depends on specific trunk lip configuration. Selection criteria: choose TLM-5 for simple compact trunk lip mounting, standard sedan/hatchback installations, situations where minimal bracket profile desired. Choose TLM-6 for installations requiring greater antenna offset from trunk surface, vehicles where larger bracket provides better trunk lip engagement, applications benefiting from Z-bracket geometry. Both brackets deliver reliable mounting performance with choice based on specific installation requirements and vehicle trunk lip configuration. Q: What is the difference between TLM-5 and TLM-3? A: TLM-5 identical to TLM-3 in all structural dimensions, bracket geometry, and mounting design—sole difference is black powder-coated finish compared to TLM-3's natural stainless steel finish. Functional specifications: both brackets feature same 1.5mm stainless steel core material, identical L-shaped bracket design, same 50mm length dimension, equivalent 16mm mounting hole, and identical self-drilling screw hardware (2 included). Finish comparison: TLM-5 black coating provides enhanced corrosion protection and discreet appearance ideal for dark-colored vehicles or installations prioritizing subtle aesthetics, TLM-3 natural stainless steel finish offers traditional bright metallic appearance. Performance equivalence: both brackets deliver identical mounting strength, antenna support capability, and long-term durability. Selection criteria: choose TLM-5 for black or dark-colored vehicles where matching finish desired, professional installations prioritizing subtle appearance, enhanced corrosion protection in harsh environments, modern aesthetic preferences. Choose TLM-3 for traditional stainless steel appearance, vehicles with chrome or bright trim, installations where metallic finish preferred. Pricing typically similar between models with finish selection based on aesthetic preferences rather than functional requirements. Installation procedures identical: same mounting method, same hardware, same trunk lip attachment approach regardless of finish selection. Q: How does L Guard bracket design compare to Z Guard for trunk mounting? A: L Guard and Z Guard bracket designs represent different geometric approaches to trunk lip antenna mounting—each offering distinct advantages for specific installation scenarios. L Guard geometry (TLM-5): simple 90-degree L-shaped bracket providing direct vertical mounting from trunk lip, antenna mounts perpendicular to trunk surface with minimal offset, compact straightforward design suitable for most standard trunk lip installations, easier installation with less complex bracket orientation. Z Guard geometry (TLM-6, TLM-7): compound Z-shaped profile creating offset between trunk lip mounting point and antenna position, positions antenna away from trunk surface providing clearance for connections and cable routing, more complex geometry potentially providing enhanced mounting stability, useful when antenna must clear trunk surface irregularities or provide specific offset distance. Mounting position differences: L Guard positions antenna closer to trunk surface with vertical orientation, Z Guard offsets antenna forward or backward from mounting point creating separation from trunk. Application considerations: L Guard adequate for most passenger vehicle trunk installations where simple vertical mounting sufficient, compact L design maintains low profile and minimal visual impact. Z Guard beneficial when additional clearance needed between antenna base and trunk surface, situations requiring specific antenna positioning relative to trunk lip, installations where offset improves cable routing or connection access. Structural comparison: both designs provide adequate strength for standard UHF CB antenna installations, material thickness and construction quality more important than bracket geometry for mounting security. Selection guidance: evaluate specific trunk lip configuration and antenna positioning requirements, consider whether simple L mounting adequate or if Z offset provides installation advantages, both designs proven effective for trunk lip antenna mounting with choice based on individual installation needs. Q: Can TLM-5 be used on surfaces other than trunk lips? A: While TLM-5 specifically designed for trunk lip mounting applications, bracket potentially adaptable to other mounting surfaces depending on surface characteristics and installation requirements. Trunk lip optimization: L Guard bracket geometry engineered specifically for trunk lip edge mounting, 50mm length and L-shape profile suited to typical trunk lip dimensions and angles, included self-drilling screws appropriate for trunk lip sheet metal thickness. Alternative mounting surfaces potentially compatible: door jamb edges if dimensions and angles appropriate, tailgate lips on wagons and SUVs with suitable edge configurations, other body panel edges with 90-degree edge profiles matching L bracket geometry, mounting surfaces with adequate material thickness supporting self-drilling screw attachment. Surface requirements for successful installation: adequate material thickness supporting self-drilling screw attachment (typically 0.8-1.5mm sheet metal), 90-degree or near-90-degree edge angle matching L bracket geometry, sufficient edge width engaging bracket mounting surface, structural integrity supporting antenna weight and wind loading. Considerations for non-trunk applications: verify L bracket geometry appropriate for alternative mounting surface angle, ensure self-drilling screws adequate for specific material thickness, consider whether simple L design provides proper antenna orientation for desired mounting location, evaluate alternative RFI brackets potentially better suited for specific non-trunk applications. Non-recommended surfaces: flat body panels without edge profiles (require different bracket designs like TLM-7 with compensating angles), surfaces with acute or obtuse angles not matching L bracket 90-degree geometry, thin flexible panels lacking structural support, areas where antenna interferes with vehicle operation. Professional recommendation: use TLM-5 at designed trunk lip mounting locations ensuring proper fitment and proven compatibility, if alternative mounting locations considered, carefully evaluate surface characteristics and bracket geometry compatibility, consult RFI product catalog for brackets specifically engineered for desired mounting applications, consider professional installer consultation for non-standard mounting scenarios. Q: What trunk lip thickness can TLM-5 self-drilling screws handle? A: Self-drilling screws included with TLM-5 suitable for typical automotive trunk lip sheet metal thickness ranging 0.8-1.5mm common for passenger vehicle boot lids. Trunk lip material specifications: most modern sedans, hatchbacks, and wagons use 0.8-1.2mm steel trunk lids for weight optimization, some older or commercial vehicles may feature 1.2-1.5mm thicker trunk panels, aftermarket trunk lids or modified vehicles may have variable thickness requiring verification. Self-drilling screw capabilities: designed penetrating sheet metal within automotive trunk thickness range, hardened drill point creating pilot hole during installation, adequate thread engagement securing bracket without pull-through risk, thread design providing secure grip preventing loosening from vibration. Installation success factors: power drill or impact driver adequate for metal penetration, firm consistent pressure maintaining screw perpendicular during penetration, controlled speed preventing screw breakage or excessive heat generation, proper bit engagement preventing screw head damage during installation. Trunk lip edge considerations: trunk lip edges often doubled or reinforced metal providing additional thickness and strength, doubled edges (two layers of sheet metal) effectively 1.6-3.0mm requiring more powerful installation, verify screw length adequate penetrating doubled material without excessive protrusion. Challenging scenarios requiring modification: very thick trunk lips (2.0mm+ single thickness or heavily reinforced edges) may require pre-drilling pilot holes assisting screw penetration, aluminum trunk lids require corrosion-resistant fasteners preventing galvanic corrosion, fiberglass or composite trunk lids may require alternative fastener types. Screw length considerations: supplied screws adequate length for typical single or doubled trunk lip thickness, verify screw does not penetrate excessively into trunk interior contacting stored items or trim panels, adequate thread engagement typically 3-4 screw threads minimum in trunk material. Pre-installation assessment: measure trunk lip thickness using calipers at proposed mounting location, verify measurement within 0.8-1.5mm range confirming standard screw suitability, inspect trunk lip edge for reinforcements or unusual construction requiring installation modifications, test-fit bracket on trunk lip before final installation verifying proper engagement and screw positioning.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

RFI TLM-6 Black Stainless Steel Z Guard Bracket - Universal Trunk Lip Mount Antenna Bracket with Professional Black Finish for Sedan, Hatchback, and Wagon UHF CB Antenna Installation Achieve discreet professional antenna mounting on trunk lip surfaces with RFI TLM-6 Black Stainless Steel Z Guard Bracket—featuring durable black powder-coated finish providing enhanced corrosion resistance and subtle low-profile appearance matching modern vehicle aesthetics, heavy-duty stainless steel construction (identical to TLM-4) ensuring robust mounting platform for UHF CB antennas and communication equipment, proven Z-bracket geometry offsetting antenna away from trunk surface preventing interference and providing optimal mounting geometry, trunk lip mount design specifically engineered for sedan, hatchback, and wagon boot lid installations eliminating drilling holes in vehicle bodywork, compact dimensions (8-inch length × 3-inch width × 3-inch height) maintaining minimal visual impact while providing secure antenna support, universal vehicle compatibility suitable for passenger vehicles, sedans, wagons, and hatchbacks requiring trunk-mounted antenna solutions, professional black finish complementing dark-colored vehicles and blending seamlessly with modern automotive styling, corrosion-resistant coating protecting against Australian coastal salt spray and harsh environmental conditions, versatile mounting accommodating standard UHF CB antenna bases, and proven RFI quality engineering delivering reliable trunk lip antenna mounting solution for passenger vehicle communication installations. Product Overview Trunk Lip Mount Series brackets made of stainless steel. Identical to TLM-4 except black. Black powder-coated stainless steel Z Guard bracket designed for trunk lip mounting applications on sedans, hatchbacks, and wagons. Professional black finish provides enhanced corrosion protection and discreet appearance. Key Features Professional Black Powder-Coated Finish - Durable black coating provides enhanced corrosion resistance, subtle low-profile appearance, and professional aesthetic matching modern vehicle styling. Heavy-Duty Stainless Steel Construction - Robust stainless steel core material (identical to TLM-4) ensures long-term structural integrity and mounting security for UHF antenna installations. Trunk Lip Mount Design - Specialized bracket configuration designed for trunk lid lip mounting eliminating drilling holes in vehicle bodywork and providing secure attachment to boot edge. Z Guard Bracket Geometry - Proven Z-shaped profile offsets antenna away from trunk surface preventing interference and providing optimal mounting position for UHF CB antennas. Compact Universal Dimensions - 8-inch length × 3-inch width × 3-inch height proportions provide secure mounting while maintaining minimal visual impact on vehicle appearance. Universal Passenger Vehicle Compatibility - Suitable for sedans, hatchbacks, wagons, and passenger vehicles requiring trunk-mounted antenna solutions without permanent vehicle modifications. Technical Specifications Specification Details Model TLM-6 SKU TLM-6 MPN TLM-6 Brand RFI Product Type Trunk Lip Mount Antenna Bracket (Z Guard Design) Material Stainless Steel Finish Black (Powder-Coated) Design Z Guard bracket Length 8 inches Width 3 inches Height 3 inches Mounting Method Trunk lip mount (clamp-on or bolt-through) Drilling Required No (trunk lip mount design) Vehicle Compatibility Universal (sedans, hatchbacks, wagons, passenger vehicles) Antenna Compatibility Standard UHF CB antennas Component Type Bracket Installation Type Trunk lid lip attachment Corrosion Protection Black powder-coated finish over stainless steel Comparison Identical to TLM-4 except black finish Application UHF CB antenna mounting, Trunk installations, Passenger vehicle antenna mounting Frequently Asked Questions Q: What is the difference between TLM-6 and TLM-4? A: TLM-6 identical to TLM-4 in all structural dimensions and mounting design—sole difference is black powder-coated finish compared to TLM-4's natural stainless steel finish. Functional specifications: both brackets feature same stainless steel core material, identical 8-inch × 3-inch × 3-inch dimensions, same Z Guard bracket geometry, and equivalent mounting capabilities. Finish comparison: TLM-6 black coating provides enhanced corrosion protection and discreet appearance ideal for dark-colored vehicles or installations prioritizing subtle aesthetics, TLM-4 natural stainless steel finish offers traditional bright metallic appearance. Performance equivalence: both brackets deliver identical mounting strength, antenna support capability, and long-term durability. Selection criteria: choose TLM-6 for black or dark-colored vehicles where matching finish desired, professional installations prioritizing subtle appearance, enhanced corrosion protection in harsh environments, modern aesthetic preferences. Choose TLM-4 for traditional stainless steel appearance, vehicles with chrome or bright trim, installations where metallic finish preferred. Pricing typically similar between models with finish selection based on aesthetic preferences rather than functional requirements. Q: How does trunk lip mounting work compared to fender mounting? A: Trunk lip mounting attaches bracket to boot lid edge (trunk lip) rather than fender surfaces—fundamentally different installation approach offering unique advantages and considerations. Mounting mechanism: bracket clamps onto or bolts through trunk lip edge utilizing existing trunk structure, no drilling into flat body panels required, weight supported by trunk lid hinge mechanism and body structure. Trunk lip mount advantages: no permanent body panel modification required, removable installation if vehicle sold or antenna relocated, accessible mounting location from outside vehicle, suitable for passenger vehicles without suitable fender mounting positions, maintains clean body panel appearance without visible mounting holes. Installation considerations: verify trunk lip thickness and configuration compatible with bracket design, ensure antenna weight does not affect trunk operation or hinge wear, consider trunk opening clearance preventing antenna contact with garage or obstacles, assess cable routing from trunk through cabin to radio installation. Fender mounting comparison: fender brackets typically require drilling or use existing body panel bolts, fender position often provides better ground plane for UHF performance, fender mounting more common on 4WD vehicles and utes, trunk mounting preferred for sedans, hatchbacks, and wagons. Vehicle suitability: trunk lip mounting ideal for passenger cars, sedans, and hatchbacks requiring rear antenna placement, particularly suitable when roof or fender mounting impractical or undesired. Professional recommendation: verify trunk lip structure adequate for bracket and antenna weight before installation, ensure trunk operation not compromised by antenna installation, consider cable routing complexity from trunk to cabin interior. Q: Will the black finish affect antenna performance? A: No—TLM-6 black powder-coated finish does not affect antenna performance as coating applied to bracket structure not antenna mounting interface or electrical ground path. Performance equivalence: black finish purely cosmetic enhancement providing corrosion protection and aesthetic appearance, stainless steel core material provides electrical conductivity and structural support identical to TLM-4, antenna mounting interface maintains metal-to-metal contact ensuring proper electrical grounding. Coating application: black powder coating applied to external bracket surfaces, mounting surfaces and antenna attachment points maintain bare metal contact for optimal electrical performance, proper installation ensures antenna base grounds to stainless steel core through coating. RF performance factors: antenna performance determined by antenna design, mounting height, ground plane quality, and cable quality—bracket finish color has no measurable impact on UHF transmission or reception. Corrosion protection enhancement: black coating actually provides superior corrosion resistance compared to bare stainless steel in some environments, enhanced protection maintains long-term structural integrity and electrical conductivity, particularly beneficial in coastal salt spray or industrial environments. Installation best practices: ensure antenna base makes solid contact with bracket mounting point, verify proper grounding continuity from antenna to vehicle chassis, use quality coax cable and connectors maintaining signal integrity. Performance verification: measure SWR (Standing Wave Ratio) after installation confirming proper antenna installation regardless of bracket finish, black or stainless finish will show identical SWR readings when properly installed. Q: What vehicles are suitable for TLM-6 trunk lip mounting? A: TLM-6 trunk lip mount bracket suitable for wide range of passenger vehicles featuring trunk/boot lid with accessible lip edge for bracket attachment. Ideal vehicle types: sedans with traditional trunk lids (Commodore, Falcon, Camry, etc.), hatchbacks with rear liftgate lip edges (Corolla, Golf, Mazda3, etc.), wagons and station wagons with tailgate lip mounting positions, passenger vehicles requiring rear antenna placement without roof or fender mounting. Trunk lip requirements: adequate lip thickness supporting bracket clamp or bolt-through attachment (typically 1-3mm sheet metal), accessible trunk edge not obstructed by trim, spoilers, or bodywork, sufficient clearance between trunk lip and body panels for bracket installation, structural integrity adequate supporting antenna weight and wind loading. Vehicle compatibility considerations: modern vehicles with aerodynamic trunk designs may have limited lip edge accessibility, vehicles with integrated spoilers or trunk wings may restrict bracket positioning, some vehicles feature trunk seals or weatherstripping potentially interfering with bracket installation. Unsuitable vehicles: vehicles without accessible trunk lip edges, utes and trucks without trunk lids (require fender or tray mounting), 4WD wagons where other mounting options preferred, vehicles with composite or fiberglass trunk lids lacking structural strength. Pre-installation assessment: physically inspect trunk lip verifying adequate mounting surface, measure trunk lip thickness confirming bracket compatibility, assess trunk opening clearance preventing antenna contact during operation, evaluate cable routing path from trunk to cabin interior. Universal compatibility note: while TLM-6 designed as universal trunk lip bracket, specific vehicle fitment depends on individual trunk lid configuration—verify compatibility before purchase for unusual vehicle designs or custom applications. Q: How do I route the antenna cable from trunk-mounted antenna to the radio? A: Cable routing from trunk-mounted antenna to dashboard radio installation requires careful planning ensuring protected cable path without compromising vehicle integrity or appearance. Primary routing methods: Through existing grommet—many vehicles feature wiring grommets between trunk and cabin (often near trunk hinge area or rear seat pass-through), locate existing grommet removing or enlarging for coax cable passage, use rubber grommet or seal protecting cable from chafing and maintaining water seal. Rear seat pass-through—fold-down rear seats often provide access between trunk and cabin, route cable through seat hinge area or folding mechanism gap, secure cable preventing interference with seat operation. Under carpet routing—route cable under trunk carpet along side panels into cabin, lift door sill plates and route cable under carpet along vehicle sides to dashboard, secure cable with clips or ties preventing movement and chafing. Cable protection requirements: use protective conduit or split loom tubing where cable contacts metal edges, ensure adequate service loops preventing tension on connections, avoid routing near exhaust components or moving mechanical parts, maintain minimum bend radius preventing coax cable damage (typically 2-inch minimum for RG58 cable). Connector considerations: if routing through small grommets, may require removing PL259 connector and re-terminating after cable pulled through opening, alternatively use bulkhead connector junction in trunk allowing connector attachment after routing. Professional installation tips: plan cable route before antenna installation, test-fit cable ensuring adequate length and routing path, use cable ties every 12-18 inches securing cable to vehicle structure, label cable at both ends identifying antenna circuit for future service. Water ingress prevention: seal all penetration points with appropriate grommets or sealant, ensure trunk lip seal not compromised by cable routing, consider using waterproof cable entry glands if drilling new holes required. Power supply consideration: if antenna requires power (for amplified antennas), route power cable separately from signal cable preventing interference, use appropriate fusing and connections meeting automotive electrical standards.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less