CTEK LITHIUM XS: Designed for Lithium (12V LiFePO4) Batteries! The CTEK LITHIUM XS is an advanced microprocessor controlled charger and maintainer specially designed for Lithium (12V LiFePO4) batteries. Automatic charging of Lithium (12V LiFePO4) batteries. The LITHIUM XS is specially designed for Lithium (12V LiFePO4) batteries. With up to 5A of charge current available, it can charge LiFePO4 batteries from 5Ah to 60Ah and maintain up to 120Ah. It's easy to use – just connect it and charging starts immediately. There's no need to disconnect your battery and any low voltage protection electronics will be reset automatically. The LITHIUM XS is a ‚Äòconnect and forget' charger with 8 charging steps, a testing sequence that tells you if the battery can take and retain the charge, a unique maximisation step to restore full capacity and patented maintenance charging for maximum performance, even after months of inactivity. CTEK LITHIUM XS Features: Reverse polarity protection Splash proof and dust proof (IP65) CTEK LITHIUM XS Specifications: Input 220–240 VAC, 50–60 Hz, 0.65 A Output 13.8/14.4 V, 5.0 A Battery capacity 5–120 Ah Charging category AC charging Back current drain* Corresponding to less than 1 Ah/month Battery voltage 12 V Battery chemistry Lithium-ion Ambient operating temperature -20 °C to +50 °C Battery types 12 V:; LiFePO‚ÇÑ Degree of protection IP65 Weight: 0.79kg Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 120A 12V Power Management System for Starter and Service Batteries: Power Management System for Starter and Service Batteries Smartpass 120S charges and supplies the service battery and equipment with 120A, separates critical equipment from non-critical equipment ensuring that radio, emergency lights and navigation systems always have power. Smartpass 120S is a 120A Power Management Solution which distributes, controls and maximises the available energy from your alternator to power service batteries and consumers. SMARTPASS 120S handles all 12V batteries between 28-800Ah. The Smartpass 120Ss Battery Guard function ensures that critical equipment such as radio, emergency lights and navigation systems always have power and take priority when the voltage on the service battery is low disconnecting non-critical consumers. The unit's Battery Guard will protect your service battery from total discharge and built in over temperature protection reduces charge current before the battery temperature gets too high. SMARTPASS 120S is compatible with the D250SA and D250SE 20A on board chargers. ✓Complete power management system✓Smart alternator compatible✓Battery guard protects what's important✓Built-in over-temperature protection✓Start assistance CTEK SMARTPASS 120S Features: Battery separation eliminates diodes and VSR relays Fully automatic Maximizes battery life Battery Guard to protect your secondary battery from total discharge Dynamic over current protection to handle temporary inputs and outputs of up to 350A for fast charging Battery temperature protection for added safety Splash and dust proof (IP65) CTEK SMARTPASS 120S Specifications: Charging category DC charging Input 11.5–23 V, 120 A (350 A temporarily for 10 seconds) Output 120 A (350 A temporarily for 10 seconds) Battery chemistry Lead acid; Lithium-ion Battery types 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO‚ÇÑ Battery capacity 28–800 Ah Back current drain* Corresponding to less than 7 Ah/month Battery voltage 12 V Ambient operating temperature -20 °C to +50 °C (- 4 ¬∞F to +122 ¬∞F) Degree of protection IP65 Gross weight (unit in box) 0.9 kg Dimensions (L x W x H) 192 x 110 x 65 mm Net weight (unit with cables) 0.7 kg Warranty 2 years Part no. 40-289 Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 60A Battery Charger and Power Supply: The CTEK PRO60 Restores Charge and Reconditions Batteries Using a Patented Multi Step Charging Process The CTEK PRO60 is an innovative and highly efficient 60A battery charger and power supply that's designed to meet the demands of the modern workshop. With its cutting edge design, advanced technology and state of the art features, it's the perfect solution for comprehensive battery charging, maintenance and support. It's compatible with all types of 12V battery, including normal wet/flooded, ca/ca and lithium (LifePo4), as well as AGM and EFB stop/start batteries. The pro60's ‚Äòadaptive charging' mode automatically detects the appropriate settings for the battery and applies the optimum settings for the fastest charge. It's designed to be user friendly with just four buttons and a clear, easy to read LCD display. The PRO60 is also the perfect stable power supply, with 12.6-14.8V available in selectable 0.1v increments. This ensures that no damage can occur to sensitive vehicle electronics. CTEK PRO60 Features: Easy to use with clear LCD display Unique, patent applied for ‚Äòadaptive charging' mode automatically detects battery size Two power supply modes for diagnostic or showroom use Built in temperature compensation Rugged, impact resistant polycarbonate casing 5m cables and heavy duty clamps IP40 rated (indoor use) Safe spark free operation Reverse polarity protected Short circuit proof CTEK PRO60 Specifications: Charging category: AC charging Back Current Drain, details: *) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current. Battery voltage: 12V Battery chemistry: Lead acid (AGM, GEL, EFB, MF, CaCa); Lithium (12 V LiFePO‚ÇÑ) Ambient operating temperature: -20 °C to +50 °C (- 4 ¬∞F to +122 ¬∞F) Output: 12 V, 60 A Start voltage: 0.8 V Ripple**: Less than 4 % Back current drain*: Corresponding to less than 2 Ah/month Ripple, details: **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple. Battery types: 12 V:; WET; Ca/Ca; AGM; EFB; GEL; LiFePO‚ÇÑ Temperature compensation: Built in temperature sensor. Battery capacity: 10–1800 Ah, lead-acid battery types. 15–600 Ah, LiFePO‚ÇÑ. Input: 220–240 VAC, 50–60 Hz, 4.6 A Cable Area: 16 mm2 Charging cable length (output): 5 m Ingress protection: IP40 Dimensions (L x W x H): 227 x 216 x 284 mm Net weight (unit with cables): 8.6 kg Gross weight (unit in box): 10.1 kg Display: LCD graphical display Test range: 100–900 CCA 100–550 DIN 100–900 EN 100–550 IEC 100–900 SAE USB: Type B USB 2 port for updates and service. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 12V 25A Battery Charger: 25A Charger and Power Supply for Workshops and Showrooms Advanced technology will ensure that a safe, fast charge is delivered to exactly meet the needs of the individual battery. The PRO25S has a dedicated lead-acid battery reconditioning programme to restore battery life & recondition flat batteries. SUPPLY mode will support the battery during diagnostic or fault-finding work. It has low voltage & current ripple, so it's safe for the battery & the vehicle's delicate electronic systems. Fully automatic & easy to use, it's also very simple to connect, spark proof and reverse-polarity protected to protect the user & also the battery. The PRO25S is designed to ensure easy handling in both the workshop & the showroom. Whilst it's lightweight & portable, the rugged, impact-resistant casing means it can also handle the toughest workshop environment. CTEK PRO25S Features: Integrated safety features, so it's safe for the battery & the vehicle. Built-in temperature sensor to achieve maximum charge levels Dedicated lead-acid reconditioning programme to restore battery life and recondition flat batteries. IP44 classified for outdoor use Lightweight & highly portable Tough & robust CTEK PRO25S Specifications: Battery capacity: 40–500 Ah, lead-acid battery types. 30–450 Ah, LiFePO‚ÇÑ. Charging category: AC charging Back current drain*: Corresponding to less than 1Ah/month Back Current Drain, details: *) Back current drain is the current that drains the battery if the charger is not connected to the mains CTEK chargers have a very low back current. Battery voltage: 12V Battery chemistry: Lead acid; Lithium-ion Ambient operating temperature: -20°C to +50°C Cooling: Fan Start voltage: 2.0V Input: 220–240 VAC, 50–60Hz, 2.9A Ripple**: Less than 4 % Output : 14.4/15.8/13.6V, 25 A, lead-acid battery types. 13.8V/14.4V/13.3V, 25A, LiFePO‚ÇÑ. Ripple, details: **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low Battery types: 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO‚ÇÑ Degree of protection: IP44Gross weight (unit in box): 2.2kg Dimensions (L x W x H): 235 x 130 x 65mm Charging cable length (output): 2m Net weight (unit with cables): 1.8kg   Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 12V 15A Battery Charger: A Reliable Battery Charger for the Outback As Well As the City The CTEK PRO15S is a powerful and fully automatic 15A battery charger and maintainer, compatible with any 12V battery, including lithium*. Safe, strong & robust, it can handle heat, dust & humidity. Combining fast and powerful charging with long-term maintenance capability, the PRO15S is the ideal charger for the workshop, the car, the caravan or the boat. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) Advanced technology will ensure that a safe, fast charge is delivered to exactly meet the needs of the individual battery. The PRO15S has a dedicated reconditioning programme to restore battery life & recondition flat batteries. SUPPLY mode can act as a secure 12V power source if the battery needs to be disconnected from the vehicle. The PRO15S has low voltage & current ripple, so it's safe for the battery & the vehicle's delicate electronic systems. Fully automatic & easy to use, it's also very simple to connect, spark proof and reverse-polarity protected to protect the user & also the battery. Whilst the PRO15S is lightweight & portable, the rugged, impact-resistant casing means it can also handle the toughest environments. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) CTEK PRO15S Features: Dedicated lithium* mode Compatible with batteries from 20Ah to 350Ah (20Ah to 300Ah lithium*). SUPPLY mode to support the battery during diagnostic or fault finding work. Fully automatic and easy to use. Simple to connect, spark proof and reverse-polarity protected. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) Integrated safety features, so it's safe for the battery & the vehicle. Built-in temperature sensor to achieve maximum charge levels Dedicated reconditioning programme to restore battery life and recondition flat batteries. IP44 classified for outdoor use Lightweight & highly portable Mounting points are designed in to the casing. Tough & robust CTEK PRO15S Specifications: Ambient operating temperature: -20 °C to +50 °C Positioning: Portable (mounting possible), Wallmounting (with special kit) Input: 220–240 VAC, 50–60 Hz, 1.8 A Output: 14.4/15.8/13.6 V, 15 A, lead-acid battery types. 13.8 V/14.4 V/13.3 V, 15 A, LiFePO‚ÇÑ. Start Voltage: 2.0 V Back Current Drain: Corresponding to less than 1 Ah/month Battery Types: 12 V:, WET, MF, Ca/Ca, AGM, EFB, GEL, LiFePO‚ÇÑ Battery Capacity: 20–350 Ah, lead-acid battery types. 20–300 Ah, LiFePO‚ÇÑ. Charging Cable Length (DC): 2 m Net Weight (unit with cables): 1.8 kg Gross Weight (unit in box): 2.1 kg Insulation Class: IP44 Ripple: Less than 4 % Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 12V 25A Marine Battery Charger and Maintainer: Great Choice for the Marine Market and Boats! CTEK M300 is an 8 step, fully automatic primary switch mode battery charger. It is a great choice for the marine market and boats with batteries from 50-500Ah and maintenance of the starter battery with the CTEK M300 STARTER. Unlike old battery chargers, CTEK chargers are designed with a focus on simplicity, safety and flexibility. They will recover the batteries quickly and satisfy the needs and comfort of the boat owner. Fully automatic In addition to normal charging, CTEK M300 offers a fully automatic charging cycle with its patented system for pulse maintenance. CTEK M300 analyses the condition of the battery, charges when necessary and maintains the battery when the boat is not in use. CTEK M300 STARTER offers fully automatic pulse maintenance charging for the starter battery. No harmful galvanic currents Neither the CTEK M300 nor CTEK M300 STARTER produces any harmful galvanic currents that causes corrosion which quickly damages various metal components under the boat, including propellers and ladders. Counteracts sulphation Unused batteries lose their power and their life is shortened through sulfation. It is also more difficult to charge sulfated batteries. The CTEK M300 has a patented method for reconditioning sulfated batteries. The charger analyzes the state of the battery and, if possible, recovers the battery and its power. Recondition the battery  Using CTEK's unique RECOND mode can correct the acid stratification that often occurs in fully discharged batteries. The battery thereby has it is power restored and enjoys an extended service life. Designed for safety CTEK develops all of its battery chargers with safety in mind, for the user, for the battery and for the sensitive electronic equipment installed in all modern boats. CTEK M300 and CTEK M300 STARTER are non-sparking, reverse polarity protected as well as short-circuit-proof and they do no damage to the boat's electronic equipment either. Designed for a tough marine environment CTEK M300 is IP44 classed which means that it is approved for outdoor use. They charge equally well at –20¬∞C as they do at +50¬∞C thanks to the charging voltage being adapted to suit the temperature of the battery, and that the components and cables are of the highest possible quality. CTEK M300 STARTER is IP65 classed and also charges in the same temperature conditions as the CTEK M300. Silent night mode With CTEK M300 there is no need to switch off the charger in order to sleep soundly. The practical and convenient NIGHT mode function now provides silent charging. Complete purchase guaranteed When buying a CTEK M300 there is a guaranteed complete purchase which means there is no need to buy any additional components or accessories. CTEK M300 Specifications: Model 1013 Voltage AC 170–260VAC, 50–60Hz. Charging voltage 14.4V Charging current 25A max. Current, mains 2.9A rms (at full charging current) Back Current Drain* <2Ah per month Current ripple** <4% Ambient temperature -20¬∞C – +50¬∞C Output power is automatically reduced at higher temperatures. Cooling Fan Charger type Eight-step, fully automatic Battery types All types of 12V lead-acid batteries (WET, MF, AGM and GEL). Battery capacity 50–500Ah Protection class IP44 (Outdoor use)*** Weight 1.4kg Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 12V 7A Marine Battery Charger and Maintainer: All-in-One Battery Charging for Marine Environments! The smart and flexible M100 is perfect for tough marine environments. The CTEK M100 8-step 12V battery charger and maintainer comes with a range of accessories for use with different types of battery. Its three selectable program modes make it suitable for use with 14-225Ah batteries and AGM batteries, and it can automatically detect whether your battery is near the end of its life. The M100 also has a Recond mode for reconditioning deeply discharged batteries and it can even be used as a 12V supply source, for example if you need to remove the battery without losing your settings. CTEK M100 Features: Compact tough design Fully automatic 8 step charging for maximum performance and extended life Splash proof and dust proof (IP65) Safe spark free operation Short circuit proof Reverse polarity protection No harmful galvanic currents CTEK M100 Specifications: Battery capacity 14–225 Ah Charging category AC charging Back current drain* Corresponding to less than 1 Ah/month Battery voltage 12 V Battery chemistry Lead acid Ambient operating temperature -20 °C to +50 °C Input 220–240 VAC, 50-60 Hz Output 14.4 V, 7.0 A Ripple** Less than 4 % Battery types 12 V:; WET; MF; AGM; GEL Degree of protection IP65 What's in the Box: CTEK M100 Marine Battery Charger and Maintainer Connect Eyelet M10 Connect Clamp Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Marine Charger for Smaller Batteries - Perfect Choice for Jet Skis and Small Boats! CTEK M45 is the perfect choice for the marine market and boats with batteries from 1.2-120Ah, like jet skis and smaller boats. Unlike old battery chargers, CTEK chargers are designed with a focus on simplicity, safety and flexibility. Marine batteries need special care as they are put under a lot of pressure. The batteries need to recover quickly to satisfy the needs and comfort of the boat owner. Fully automatic CTEK M45 offers a fully automatic charging cycle, the charger takes its own readings and then begins to charge the battery, including pulse maintenance (arguably the most caring mode for a battery connected for a long time – patented system by CTEK) for best performance and service life. CTEK M45 can be connected for months, which is ideal when the boat is not in use and during the off season. Flexible for different battery needs CTEK M45 is specifically developed for different needs, boats and batteries. There is a choice between three different modes. The low-current mode (the jet ski icon) is perfect for smaller 12V batteries such as jet skies. The higher current mode (the boat icon) is for marine applications with batteries up to 120Ah. Finally, an additional AGM mode is specifically aimed at charging and maintenance of the Optima Red Top batteries and is also perfect for cold weather. No harmful galvanic currents The CTEK M45 produces no harmful galvanic currents that cause corrosion which quickly damages various metal components under the boat, including propellers and ladders. Counteracts sulphation Unused batteries lose their power and their life is shortened through sulfation. It is also more difficult to charge sulfated batteries. The CTEK M45 has a patented method for reconditioning sulfated batteries. The charger analyzes the state of the battery and, if possible, recovers the battery and its power. Compatible with the boats electronic equipment The marine environment is filled with GPS, navigation systems and other devices that are sensitive. Unlike less-sophisticated chargers, there is no need to disconnect the battery when charging as CTEK M45 is specially designed not to damage the electronic systems. Made for all weather conditions and situations The CTEK M45 is prepared to charge and maintain, no matter the weather, temperature or situation. The CTEK M45 is extremely robust and water and dust resistant (IP65 classification). The CTEK M45 is certified for use between –20ºC and +50ºC. In order to make things easier and more convenient, Comfort Connect (eyelet terminals) can be permanently connected to the boat battery. Designed for safety All CTEK models are designed to consider the safety of the user. They are spark free, making the connection much easier and safer considering the gases batteries normally produce. The CTEK M45 is also protected from reverse-polarity connections and is short-circuit proof. A red light on the charger will simply indicate that the charging cannot begin until the user has connected the charger correctly. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 24V DC-DC Battery Charger, Separator, 12V Converter and Equaliser: The CTEK D250TS Continues the Tradition of Offering Chargers with A Focus on Simplicity, Safety and VersatilityThe CTEK D250TS is a fully automatic battery charger, battery separator, 12V converter and an equaliser for 24V battery banks combined. Perfect for heavy vehicles, RV's, boats and other vehicles.The D250TS is a fully automatic 4-step charger that supplies 10A to 24V batteries of 20–200Ah. The charger is IP65 classified (water jet and dust protected and approved for outdoor use) and protects vehicle electronics. It is suitable for all types of lead-acid batteries (Wet, MF, Ca/Ca, Gel, AGM). It is supplied with a 2 year warranty.CTEK D250TS Features: Multi-step charging from 24V sources like alternators. Battery separator that eliminates diodes and VSR relays. Maintenance charge of starter battery. Simplified installation of remote batteries for bow thrust of anchor winch. Built-in 12V converter. CTEK D250TS Specifications: Volt: 24V Input voltage: 14-30V Charging voltage: 28.8 V at 25°C, temperature compensated. Voltage reduced at higher voltage, increased at lower Charging current: 10A max Back current drain: <1mAh/month Equalization current: Max 10 A, average pending time used for Starter battery charging Equalization voltage: 50 % of input voltage Ripple: <4% Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 4 step, fully automatic DC/DC charger Battery types: All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Status signal: +24 V ON when D250TS is working properly. Max current 500 mA Battery capacity: 28–200 mAh Dimensions: 197 x 93 x 49mm (L x W x H) Insulation: class IP65 Connection Diagram Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK Rubber Bumper: Protect Your Charger And Your Paint WorkMade of durable silicon rubber material, the CTEK Rubber Bumper helps protect your CTEK charger from bumps and scratches. The CTEK BUMPER fits snugly around the body of your CTEK charger to give extra grip on slippery surfaces.Suitable for all CTEK chargers 3.6-5.0mAh. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Suitable for Use with All CTEK Chargers Up to 10A Using the Comfort Connect System Extension cable allows the CTEK charger to be used further away from the vehicle or battery. To use, simply connect the Comfort Connect Extension cable into your CTEK charger accessory plug and place the other end into the socket of the clamp or eyelet accessories that came supplied with your CTEK charger. The unique CTEK Comfort Connect system ensures a secure connection. Features: 2.5M/8' 2” Cable Max 10A Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

Recipient Of Popular Mechanics Product Of The Year Award The CTEK Comfort Indicator Clamps are designed and developed to make battery maintenance a much more simple affair, especially when dealing with multiple vehicles on a regular basis, for example at a car dealerships, worksites, car hire yards etc... Comfort Indicator clamp is equipped with LED light panel which easily shows the status on the battery and therefore eliminates the risk of selling a car with a flat battery, or leaving a battery go too long without a charge. CTEK Comfort Indicator clamps can prolong the life expectancy of the battery as it makes sure it can always be fully charged and it indicates when the harmful sulfation process begins. Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less