CTEK 24V 8-Step Battery Charger: For 24V Batteries with Power Supply The 8 step charger is ideal for smaller 24V batteries and maintenance charging for fleets with 24V vehicles. The CTEK MXT4.0 is a cost-effective 8-step charger that delivers 4A to 24V batteries from 8-100Ah and is suitable for maintenance charging up to 250Ah. It can also be used in applications such as back-up systems, piste machinery, industrial cleaning machinery and wheelchairs. The MXT 4.0 features battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, an optimised cold charging mode and an AGM battery charging mode. The charger also has a ‚ÄòSupply' mode so it can be used as a power source. CTEK MXT4.0 Features: Fully automatic ‚Äòconnect and forget' 8 step charging Can be used as a power source Easy-to-read LED display Safe spark-free operation Reverse polarity protected Short circuit proof CTEK MXT4.0 Specifications: Battery capacity 8–250 Ah Charging category AC charging Back current drain* Corresponding to less than 1 Ah/month Back Current Drain, details *) The Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current. Battery voltage 24 V Battery chemistry Lead acid (AGM, GEL, EFB, MF, CaCa) Ambient operating temperature -20 °C to +50 °C Input 220–240 VAC, 50–60 Hz, 1.2 A Output 28.8/29.4/31.4 V, 4.0 A Start voltage 2.0 V Ripple** Less than 5 % Ripple, details **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple. Battery types 24 V:; WET; MF; Ca/Ca; AGM; GEL Ingress protection IP65 Dimensions (L x W x H) 191 x 89 x 48 mm Net weight (unit with cables) 0.8 kg Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 12V 25A Battery Charger: 25A Charger and Power Supply for Workshops and Showrooms Advanced technology will ensure that a safe, fast charge is delivered to exactly meet the needs of the individual battery. The PRO25S has a dedicated lead-acid battery reconditioning programme to restore battery life & recondition flat batteries. SUPPLY mode will support the battery during diagnostic or fault-finding work. It has low voltage & current ripple, so it's safe for the battery & the vehicle's delicate electronic systems. Fully automatic & easy to use, it's also very simple to connect, spark proof and reverse-polarity protected to protect the user & also the battery. The PRO25S is designed to ensure easy handling in both the workshop & the showroom. Whilst it's lightweight & portable, the rugged, impact-resistant casing means it can also handle the toughest workshop environment. CTEK PRO25S Features: Integrated safety features, so it's safe for the battery & the vehicle. Built-in temperature sensor to achieve maximum charge levels Dedicated lead-acid reconditioning programme to restore battery life and recondition flat batteries. IP44 classified for outdoor use Lightweight & highly portable Tough & robust CTEK PRO25S Specifications: Battery capacity: 40–500 Ah, lead-acid battery types. 30–450 Ah, LiFePO‚ÇÑ. Charging category: AC charging Back current drain*: Corresponding to less than 1Ah/month Back Current Drain, details: *) Back current drain is the current that drains the battery if the charger is not connected to the mains CTEK chargers have a very low back current. Battery voltage: 12V Battery chemistry: Lead acid; Lithium-ion Ambient operating temperature: -20°C to +50°C Cooling: Fan Start voltage: 2.0V Input: 220–240 VAC, 50–60Hz, 2.9A Ripple**: Less than 4 % Output : 14.4/15.8/13.6V, 25 A, lead-acid battery types. 13.8V/14.4V/13.3V, 25A, LiFePO‚ÇÑ. Ripple, details: **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low Battery types: 12 V:; WET; MF; Ca/Ca; AGM; EFB; GEL; LiFePO‚ÇÑ Degree of protection: IP44Gross weight (unit in box): 2.2kg Dimensions (L x W x H): 235 x 130 x 65mm Charging cable length (output): 2m Net weight (unit with cables): 1.8kg   Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK 24V DC-DC Battery Charger, Separator, 12V Converter and Equaliser: The CTEK D250TS Continues the Tradition of Offering Chargers with A Focus on Simplicity, Safety and VersatilityThe CTEK D250TS is a fully automatic battery charger, battery separator, 12V converter and an equaliser for 24V battery banks combined. Perfect for heavy vehicles, RV's, boats and other vehicles.The D250TS is a fully automatic 4-step charger that supplies 10A to 24V batteries of 20–200Ah. The charger is IP65 classified (water jet and dust protected and approved for outdoor use) and protects vehicle electronics. It is suitable for all types of lead-acid batteries (Wet, MF, Ca/Ca, Gel, AGM). It is supplied with a 2 year warranty.CTEK D250TS Features: Multi-step charging from 24V sources like alternators. Battery separator that eliminates diodes and VSR relays. Maintenance charge of starter battery. Simplified installation of remote batteries for bow thrust of anchor winch. Built-in 12V converter. CTEK D250TS Specifications: Volt: 24V Input voltage: 14-30V Charging voltage: 28.8 V at 25°C, temperature compensated. Voltage reduced at higher voltage, increased at lower Charging current: 10A max Back current drain: <1mAh/month Equalization current: Max 10 A, average pending time used for Starter battery charging Equalization voltage: 50 % of input voltage Ripple: <4% Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 4 step, fully automatic DC/DC charger Battery types: All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Status signal: +24 V ON when D250TS is working properly. Max current 500 mA Battery capacity: 28–200 mAh Dimensions: 197 x 93 x 49mm (L x W x H) Insulation: class IP65 Connection Diagram Legendary Products & Support From Authorized Dealers When you choose CTEK, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized CTEK dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by CTEK's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized CTEK dealer today!

Read more less

CTEK CTIND384 (56-384) - Comfort Indicator Clamps 1M Cable Convenient LED battery charge level indicator with quick-connect clamps for instant 12V battery status monitoring. The CTEK Comfort Indicator Clamps 1M Cable provides easy-to-use visual battery charge level assessment through intuitive LED 'traffic light' system allowing quick verification of battery state without complex testing equipment or voltage meters. Featuring tough durable clamps for quick and easy connection to 12V car and motorcycle batteries, this handy indicator gives immediate visual feedback showing whether battery is fully charged (green), needs charging soon (amber), or requires immediate charging (red), eliminating guesswork in battery maintenance and preventing unexpected failures. The CTEK Comfort Indicator features CTEK's unique CONNECT system enabling rapid attachment to CTEK battery chargers providing convenient access point for charging without disconnecting indicator clamps, ideal for batteries in difficult-to-reach locations or vehicles requiring regular monitoring. The 1-meter cable length provides flexible positioning allowing indicator to be mounted in visible location while clamps connect to battery terminals in engine bay, under seats, or storage compartments. Perfect for monitoring seasonal vehicles including motorcycles, classic cars, caravans, boats, and stored vehicles requiring periodic charge verification, workshop applications where quick battery status checks are needed across multiple vehicles, and DIY enthusiasts wanting simple reliable battery monitoring without investing in expensive testing equipment. Compatible with all 12V lead-acid batteries including wet/flooded, maintenance-free, AGM, and gel types, this practical accessory helps extend battery life through timely charging intervention, prevents sulfation damage from extended low-charge storage, and provides peace of mind that batteries are maintained at optimal charge levels. Distributed by Bainbridge Technologies, Australia's leading power product experts with over 30 years of experience in DC power solutions, backed by comprehensive technical support and local warranty coverage. Product Overview CTEK Comfort Indicator Clamps 1M Cable is easy to use. LED battery charge level indicator with clamps for 12V car and motorcycle batteries. The CTEK Comfort Indicator Clamps 1M Cable is an easy to use LED indicator that lets you quickly check the state of your battery. It features tough, durable clamps for quick and easy connection to the battery and the simple LED 'traffic light' system will give you an immediate indication of your battery charge level, so you know when it needs charging. The CTEK INDICATOR CLAMP features CTEK's unique CONNECT system so it can be quickly attached to a CTEK charger and give you easy access to the battery. Important Notes: 12V Lead-Acid Batteries Only: Designed exclusively for 12V lead-acid battery systems including wet/flooded, maintenance-free, AGM, and gel batteries. Not compatible with 6V batteries, 24V systems, or lithium batteries (LiFePO4, Li-ion). Using with incompatible battery types may produce inaccurate readings or damage indicator electronics. For lithium battery monitoring, consult battery manufacturer for appropriate voltage indicators. Visual Indicator, Not Precision Meter: The LED traffic light system provides quick approximate battery charge status (good/marginal/low) but is not precision voltage measurement tool. Green LED indicates satisfactory charge (typically above 12.5V), amber indicates marginal charge requiring attention (approximately 12.2-12.5V), red indicates low charge requiring immediate charging (below 12.2V). For precise voltage measurements, use digital multimeter. Indicator readings may be affected by battery surface charge, temperature, and load conditions. CTEK CONNECT System Compatibility: Features CTEK's proprietary CONNECT system allowing direct attachment to CTEK battery chargers equipped with matching CONNECT eyelet or connector. This enables charging through indicator clamps without disconnection. Compatible with CTEK chargers featuring CONNECT accessories including MXS 5.0, MXS 10, CT5 TIME TO GO, and other CONNECT-compatible models. Not compatible with chargers lacking CONNECT system. Not for Permanent Installation: Clamp design intended for temporary connection and periodic monitoring, not permanent installation. For permanent monitoring or charging access, use CTEK COMFORT CONNECT eyelet connector (sold separately) which bolts to battery terminals allowing quick-disconnect access. Clamps should not be left connected during vehicle operation as vibration may cause loosening or arcing. Clean Terminal Connection Essential: Battery terminals must be clean and free from corrosion for accurate readings and reliable connection. Dirty or corroded terminals prevent proper electrical contact causing incorrect LED indications or intermittent operation. Clean terminals with wire brush before attaching clamps. Ensure clamps firmly grip terminals - loose connections provide misleading readings. Key Features LED Traffic Light Indicator System - Intuitive red/amber/green LED display provides instant visual battery charge level assessment without voltage meters or complex interpretation. Quick-Connect Battery Clamps - Tough durable clamps attach quickly and securely to battery terminals enabling fast status checks without tools or permanent installation. 1 Meter Cable Length - Flexible cable positioning allows indicator display in visible location while clamps connect to battery in engine bay or storage compartments. CTEK CONNECT System Integration - Proprietary CONNECT system enables direct attachment to compatible CTEK battery chargers for convenient charging access point. 12V Battery Compatibility - Works with all 12V lead-acid battery types including wet/flooded, maintenance-free, calcium-calcium, AGM, and gel batteries. Car and Motorcycle Applications - Suitable for automotive batteries, motorcycle batteries, and small vehicle batteries requiring periodic charge monitoring. No Battery Disconnection Required - Check battery status without disconnecting terminals preserving vehicle settings, radio codes, and ECU memory. Instant Status Indication - Immediate LED feedback shows battery condition within seconds of connection eliminating waiting for test results. Durable Construction - Robust clamps and cable withstand repeated connections, workshop use, and outdoor environmental exposure. Seasonal Vehicle Monitoring - Ideal for stored vehicles, classic cars, motorcycles, boats, and caravans requiring periodic charge verification during storage. Workshop Efficiency Tool - Quick status checks across multiple vehicles in service bays or fleet maintenance operations without dedicated testing equipment. Prevents Sulfation Damage - Regular monitoring identifies low-charge conditions enabling timely charging preventing permanent sulfation damage to battery plates. Peace of Mind Storage - Visual confirmation that stored vehicle batteries maintain optimal charge levels throughout off-season storage periods. DIY-Friendly Operation - Simple plug-and-check operation requires no technical knowledge or training for accurate battery status assessment. Compact Portable Design - Lightweight compact indicator easily stored in toolbox, glove compartment, or workshop drawer for convenient access. CTEK Quality Engineering - Swedish-designed precision indicator from globally recognized battery charging and maintenance technology leader. Bainbridge Technologies Support - Distributed by Australia's leading power product experts providing local technical support and warranty coverage. Technical Specifications Specification Details Brand CTEK Product Type Battery Charge Level Indicator with Clamps SKU CTIND384 (56-384) Part Number 56-384 Battery Voltage 12V DC Systems Battery Chemistry Lead-Acid (Wet, Maintenance-Free, AGM, Gel) Indicator Type LED Traffic Light System (Red/Amber/Green) Cable Length 1 Meter (1000mm) Connection Type Battery Clamps (Spring-Loaded) CTEK CONNECT System Yes (Compatible with CTEK CONNECT Chargers) Installation Type Temporary Connection (Clamp-On) Charging Access Yes (When Connected to CTEK CONNECT Charger) LED Indicators 3-Color Status Display Green LED Battery Fully Charged / Good Condition Amber LED Battery Marginal Charge / Needs Attention Red LED Battery Low Charge / Requires Immediate Charging Typical Voltage Thresholds Green: >12.5V, Amber: 12.2-12.5V, Red: <12.2V Applications Cars, Motorcycles, Caravans, Boats, Stored Vehicles Operating Temperature To be determined Storage Temperature To be determined Clamp Material Durable Metal with Insulated Grips Product Weight 0.15kg Product Dimensions 210 x 120 x 30mm (packaged) Distributor Bainbridge Technologies (Australian Owned) Warranty Standard Manufacturer Warranty (Bainbridge Technologies) Frequently Asked Questions Q: What do the different LED colors mean and how accurate are they? A: The traffic light LED system provides approximate battery charge status: Green LED indicates battery is fully charged or in good condition (typically above 12.5V resting voltage), Amber LED indicates battery has marginal charge and should be charged soon (approximately 12.2-12.5V), Red LED indicates battery is low and requires immediate charging (below 12.2V). These are approximate thresholds - exact voltage points may vary slightly. The indicator provides quick status assessment, not precision voltage measurement. For most accurate reading, allow battery to rest 2-4 hours after charging or vehicle use to dissipate surface charge before checking. Temperature affects battery voltage (colder = lower voltage reading) so consider seasonal conditions when interpreting results. Q: Can I leave this connected permanently or use it while driving? A: No, the Comfort Indicator Clamps are designed for temporary connection and periodic monitoring, not permanent installation. Do not leave connected during vehicle operation as: (1) Vibration may cause clamps to loosen creating arcing, sparks, or electrical shorts, (2) Clamps may accidentally contact metal vehicle components causing shorts, (3) Cable may become tangled in moving engine components. For permanent monitoring or charging access, use CTEK COMFORT CONNECT eyelet connector (sold separately) which bolts securely to battery terminals. Eyelet connectors are designed for permanent installation with quick-disconnect capability for indicator or charger attachment. Q: How does the CTEK CONNECT system work for charging? A: The CTEK CONNECT system allows you to charge battery through the indicator clamps without disconnecting them. Process: (1) Connect indicator clamps to battery terminals, (2) Plug compatible CTEK charger's CONNECT cable into indicator's CONNECT port, (3) Charger delivers power through indicator to battery. This is convenient for batteries in difficult-to-reach locations (motorcycle batteries under fairings, marine batteries in compartments) where you don't want to remove panels repeatedly for charging. The CONNECT system only works with CTEK chargers featuring CONNECT accessories - not all CTEK chargers have this capability. Check charger compatibility before purchasing for this purpose. Q: Will this work on my AGM battery, gel battery, or motorcycle battery? A: Yes, the CTEK Comfort Indicator Clamps work with all 12V lead-acid battery types including conventional wet/flooded batteries, maintenance-free batteries, AGM (Absorbed Glass Mat) batteries, and gel batteries. It's equally suitable for large car batteries and small motorcycle batteries - the voltage thresholds are the same regardless of battery size or type. However, it does NOT work with lithium batteries (LiFePO4, Li-ion) which have different voltage characteristics requiring specific lithium battery monitors. The indicator is particularly useful for motorcycle batteries which are often in hard-to-reach locations and benefit from quick status checks without removing fairings or seats. Q: Why does the indicator show red even after I've charged the battery? A: Several possible causes: (1) Surface charge not dissipated - immediately after charging, battery has temporary voltage elevation. Allow 2-4 hours rest, then retest. (2) Battery sulfated or damaged - old or neglected batteries lose capacity and won't hold full charge even after charging. Battery may need replacement. (3) Charger insufficient - battery may require longer charging time or higher-capacity charger. (4) Poor clamp connection - dirty terminals or loose clamps cause voltage drop. Clean terminals thoroughly and ensure firm connection. (5) Battery under load - if vehicle accessories drawing current during testing, voltage drops. Turn off all loads before testing. (6) Defective battery - internal cell failure prevents charging. If battery repeatedly shows red after proper charging, likely needs replacement. Use CTEK Battery Analyzer for comprehensive diagnosis.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CTEK CTIND629 (56-629) - Comfort Indicator Eyelet M6 Permanent-mount LED battery charge indicator with M6 eyelet terminals for convenient monitoring and charging access to hard-to-reach batteries. The CTEK Comfort Indicator M6 Eyelet provides professional permanent installation solution combining battery status monitoring with integrated charging access point through CTEK's unique CONNECT system, ideal for batteries in difficult-to-access locations including motorcycles under fairings, marine batteries in compartments, caravans, classic cars, and stored vehicles. Featuring intuitive LED 'traffic light' system showing battery charge status through simple red/amber/green visual indication allowing instant verification of battery condition without tools or complex testing equipment, this permanently-installed indicator eliminates need to repeatedly access battery terminals for charging or monitoring. The M6 eyelet terminals (6mm bolt holes) securely attach directly to battery posts providing reliable permanent electrical connection suitable for professional installations, while the 500mm cable length allows flexible positioning of indicator panel in visible accessible location separate from battery compartment. When charging is required, simply plug compatible CTEK battery charger into indicator's CONNECT port delivering power through eyelet terminals to battery without disconnecting or accessing battery directly—particularly valuable for batteries behind panels, under seats, in sealed compartments, or requiring frequent charging access during storage periods. Perfect for motorcycle enthusiasts avoiding repeated fairing removal, marine applications where batteries are in sealed compartments, classic car collectors maintaining stored vehicles, caravan owners monitoring auxiliary batteries, and workshop applications providing permanent charging access points across fleet vehicles. Compatible with all 12V lead-acid batteries including wet/flooded, maintenance-free, AGM, and gel types, this professional-grade accessory helps extend battery life through convenient regular monitoring, prevents sulfation damage from neglected low-charge storage, and provides permanent charging infrastructure for seasonal vehicles. Distributed by Bainbridge Technologies, Australia's leading power product experts with over 30 years of experience in DC power solutions, backed by 2-year warranty and comprehensive technical support. Product Overview M6 eyelets and indicator panel to check battery status. INDICATOR – Eyelet M6 and M8 use a simple 'traffic light' system to show the state of charge of your battery. With INDICATOR – Eyelet you have a permanent installation. Should charging be required plug in the CTEK charger and charge the battery. Cable length 500 mm. The CTEK Comfort Indicator M6 Eyelet is ideal for charging and checking batteries that are difficult to get to or hidden. The 'traffic light' system shows your battery's charge status simply and clearly. Connect the eyelet terminals to the battery, check the status, then plug the connector into your CTEK charger if the battery needs charging. CTEK Comfort Indicator M6 Eyelet comes with a 2-year warranty. Important Notes: M6 Terminal Size - Verify Compatibility: M6 eyelet terminals feature 6mm bolt holes designed for M6 bolts (6mm diameter). Verify your battery terminals accept M6 bolt connections before purchase. Most automotive batteries use larger posts requiring M8 eyelets (see CTEK Comfort Indicator M8 Eyelet). M6 eyelets are commonly used on: motorcycle batteries with M6 terminal bolts, small marine batteries, some AGM batteries with threaded terminals, and auxiliary batteries with M6 terminal studs. Do not force M6 eyelets onto larger terminals—use correct size for secure connection. Permanent Installation Required: Unlike clamp-style indicators, eyelet terminals are designed for permanent bolt-on installation to battery terminals. Installation requires: (1) Disconnecting battery negative terminal first (preventing shorts), (2) Removing battery terminal bolts, (3) Installing eyelet terminals under bolts with proper orientation (red to positive, black to negative), (4) Torquing bolts to manufacturer specifications (typically 5-7 Nm for M6), (5) Routing cable to desired indicator panel location, (6) Securing cable away from moving parts and heat sources. Professional installation recommended if unfamiliar with battery terminal connections. CTEK CONNECT System Compatibility: Features CTEK's proprietary CONNECT system allowing direct charging through indicator without disconnecting eyelet terminals. Compatible only with CTEK battery chargers equipped with CONNECT accessories including MXS 5.0, MXS 10, CT5 TIME TO GO, and other CONNECT-compatible models. Not compatible with standard CTEK chargers lacking CONNECT ports or non-CTEK chargers. Verify charger compatibility before purchasing for integrated charging access. 500mm Cable Length Consideration: The 500mm (0.5 meter) cable provides fixed distance between battery terminals and indicator panel mounting location. Measure required cable routing distance before installation—if indicator panel location exceeds 500mm from battery, this product is unsuitable. Cable cannot be extended as this affects LED indicator operation. Plan indicator panel mounting location within 500mm of battery considering cable routing path avoiding sharp edges, moving parts, and heat sources. 12V Lead-Acid Batteries Only: Designed exclusively for 12V lead-acid battery systems including wet/flooded, maintenance-free, AGM, and gel batteries. Not compatible with 6V batteries, 24V systems, or lithium batteries (LiFePO4, Li-ion). Using with incompatible battery types may produce inaccurate readings or damage indicator electronics. For lithium battery monitoring, consult battery manufacturer for appropriate voltage indicators. Key Features LED Traffic Light Indicator System - Intuitive red/amber/green LED display provides instant visual battery charge level assessment without voltage meters or complex interpretation. M6 Eyelet Terminal Connection - Professional permanent-mount terminals with 6mm bolt holes for secure reliable installation on battery posts or terminal studs. Permanent Installation Design - Bolt-on eyelet terminals remain permanently connected eliminating need for repeated battery access during monitoring or charging. 500mm Cable Length - Half-meter cable allows flexible indicator panel positioning in visible accessible location separate from battery compartment. CTEK CONNECT System Integration - Proprietary CONNECT port enables direct charging through eyelet terminals when compatible CTEK charger plugged in. Integrated Charging Access - Charge battery through indicator's CONNECT port without disconnecting eyelet terminals or accessing battery directly. Hard-to-Reach Battery Solution - Ideal for batteries behind panels, under fairings, in sealed compartments, or requiring frequent charging access. 12V Battery Compatibility - Works with all 12V lead-acid battery types including wet/flooded, maintenance-free, calcium-calcium, AGM, and gel batteries. Motorcycle Applications - Perfect for motorcycle batteries under fairings avoiding repeated panel removal for charging and status checks. Marine and Caravan Use - Suitable for marine batteries in sealed compartments and caravan auxiliary batteries requiring regular monitoring. Instant Status Indication - Immediate LED feedback shows battery condition (good/marginal/low) enabling timely charging intervention. Professional Installation Quality - Permanent bolt-on connection provides superior reliability compared to temporary clamp connections. Seasonal Vehicle Monitoring - Excellent for stored vehicles, classic cars, boats requiring periodic charge verification during off-season storage. No Battery Terminal Access Required - Check status and charge battery without removing panels, opening compartments, or accessing battery terminals. Durable Construction - Robust eyelet terminals and cable withstand permanent installation, environmental exposure, and repeated charger connections. Workshop Efficiency Tool - Permanent installation across fleet vehicles provides quick-access charging points without accessing individual battery compartments. Prevents Sulfation Damage - Regular monitoring identifies low-charge conditions enabling timely charging preventing permanent sulfation damage. 2-Year Warranty - Extended warranty coverage providing confidence in long-term reliability and manufacturer support. CTEK Quality Engineering - Swedish-designed precision indicator from globally recognized battery charging and maintenance technology leader. Bainbridge Technologies Support - Distributed by Australia's leading power product experts providing local technical support and warranty coverage. Technical Specifications Specification Details Brand CTEK Product Type Battery Charge Level Indicator with Eyelet Terminals SKU CTIND629 (56-629) Part Number 56-629 Battery Voltage 12V DC Systems Battery Chemistry Lead-Acid (Wet, Maintenance-Free, AGM, Gel) Indicator Type LED Traffic Light System (Red/Amber/Green) Cable Length 500mm (0.5 Meter) Terminal Type M6 Eyelet (6mm Bolt Hole) Connection Type Permanent Bolt-On Installation CTEK CONNECT System Yes (Compatible with CTEK CONNECT Chargers) Charging Access Yes (Through CONNECT Port) LED Indicators 3-Color Status Display Green LED Battery Fully Charged / Good Condition Amber LED Battery Marginal Charge / Needs Attention Red LED Battery Low Charge / Requires Immediate Charging Typical Voltage Thresholds Green: >12.5V, Amber: 12.2-12.5V, Red: <12.2V Installation Type Permanent (Eyelet Terminals) Typical Bolt Torque 5-7 Nm (44-62 in-lbs) for M6 Applications Motorcycles, Marine, Caravans, Stored Vehicles, Classic Cars Operating Temperature To be determined Storage Temperature To be determined Eyelet Material Tinned Copper with Insulation Product Weight To be determined Warranty 2 Years Distributor Bainbridge Technologies (Australian Owned) Frequently Asked Questions Q: What's the difference between M6 and M8 eyelet indicators and which do I need? A: M6 and M8 refer to the eyelet terminal bolt hole size: M6 eyelets have 6mm diameter holes for 6mm bolts, commonly found on motorcycle batteries, small marine batteries, and some AGM batteries with threaded terminals. M8 eyelets have 8mm diameter holes for 8mm bolts, commonly used on standard automotive car batteries, truck batteries, and larger marine batteries. To determine which you need: check your battery terminals—if they have threaded studs or require bolts for connection, measure bolt diameter or check battery specifications. Most car batteries use M8, most motorcycles use M6. Using wrong size results in loose connection (too large) or inability to install (too small). If unsure, M6 is this product; search for CTEK Comfort Indicator M8 Eyelet for larger applications. Q: How do I install the eyelet terminals on my battery? A: Professional installation process: (1) Disconnect battery - remove negative terminal first (prevents shorts), (2) Remove terminal bolts - loosen/remove existing M6 bolts from battery terminals, (3) Prepare eyelets - identify red eyelet (positive) and black eyelet (negative), (4) Install positive eyelet - place red eyelet over positive terminal stud, reinstall bolt, torque to 5-7 Nm, (5) Install negative eyelet - place black eyelet over negative terminal stud, reinstall bolt, torque to 5-7 Nm, (6) Route cable - secure 500mm cable to desired indicator panel location avoiding sharp edges, moving parts, heat sources, (7) Mount indicator panel - position where easily visible and protected from weather (if applicable), (8) Test operation - verify LED illuminates showing battery status. If unfamiliar with battery terminal work, professional installation strongly recommended. Q: Can I charge my battery through this indicator and how does it work? A: Yes, the CTEK CONNECT system allows charging through the indicator without disconnecting eyelet terminals. Process: (1) Verify you have CTEK charger with CONNECT capability (MXS 5.0, MXS 10, CT5 TIME TO GO, etc.), (2) Plug charger's CONNECT cable into indicator panel's CONNECT port, (3) Charger delivers power through indicator and eyelet terminals to battery, (4) When charging complete, unplug charger. This is extremely convenient for batteries in difficult locations—once eyelets are permanently installed, you never need to access battery terminals for charging again. Simply plug charger into accessible indicator panel location. Note: only works with CTEK chargers featuring CONNECT system; standard CTEK chargers without CONNECT ports cannot charge through indicator. Q: What do I do if the 500mm cable isn't long enough for my installation? A: The 500mm cable length is fixed and cannot be extended as this would affect LED indicator operation and electrical characteristics. If your required cable routing distance exceeds 500mm from battery to desired indicator panel location, this product is unsuitable. Options: (1) Relocate indicator panel - find mounting location within 500mm of battery, (2) Use clamp-style indicator - CTEK Comfort Indicator Clamps (1M cable) provides longer reach for temporary monitoring, (3) Relocate battery - if possible, reposition battery closer to desired indicator location, (4) Use CTEK CONNECT Eyelet M6 without indicator - install basic CONNECT eyelet for charging access only without status indicator. Measure carefully before purchase ensuring 500mm cable reaches intended indicator mounting location considering actual cable routing path (not straight-line distance). Q: Will this work on my motorcycle, boat, or caravan battery? A: Yes, the M6 Eyelet Indicator works with any 12V lead-acid battery with M6 (6mm) terminal connections. It's particularly ideal for: Motorcycles - most motorcycle batteries use M6 terminals and benefit from indicator accessible outside fairings eliminating repeated panel removal. Marine batteries - small to medium marine batteries often use M6 terminals; permanent installation provides convenient monitoring in sealed battery compartments. Caravan auxiliary batteries - ideal for monitoring house batteries in caravan storage compartments. Classic cars - excellent for stored vehicles requiring periodic charge monitoring. However, verify your specific battery has M6 terminals (6mm bolt holes)—if terminals accept 8mm bolts, you need M8 version instead. Battery chemistry (wet, AGM, gel) doesn't matter—all 12V lead-acid types are compatible. Does NOT work with lithium batteries which require different monitoring technology.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CTEK CTPRO120 (40-230) - PRO120 Professional 120AMP 12V & Lithium Battery Charger Professional-grade 120A battery charger for workshop, fleet, marine, and industrial applications requiring rapid charging and lithium battery compatibility. Delivers exceptional 120 Amp charging current for rapid replenishment of large battery banks (200-1000Ah) where charging time is critical and downtime must be minimized. Features comprehensive battery chemistry compatibility including 12V lead-acid batteries (wet/flooded, maintenance-free, AGM, gel) and lithium batteries (LiFePO4/LFP) with dedicated charging profiles ensuring safe optimal charging. The fully automatic multi-stage charging process adapts to battery type, capacity, and condition through bulk charge, absorption, analysis, and maintenance stages maximizing battery lifespan and performance. Designed for demanding professional environments including automotive workshops, marine facilities, fleet maintenance, caravan dealerships, mining operations, and industrial facilities requiring reliable high-current charging infrastructure. The 120A output dramatically reduces charging time—a 200Ah battery charges in approximately 2-3 hours from 50% rather than 10+ hours with conventional 10-20A chargers, maximizing equipment availability and operational efficiency. Features robust construction withstanding workshop environments, comprehensive safety protections including reverse polarity protection, short circuit proof design, and spark-free operation. Distributed by Bainbridge Technologies, Australia's leading power product experts with over 30 years of experience, backed by comprehensive technical support, installation guidance, and commercial warranty coverage. Product Overview Professional 120 Amp battery charger designed for workshop, fleet, marine, and industrial applications. Compatible with 12V lead-acid batteries and lithium batteries (LiFePO4/LFP). Features fully automatic multi-stage charging, robust construction, and comprehensive safety protections for demanding professional environments. Important Notes: Professional Installation Required: High-current equipment requiring dedicated 15-20A AC circuit, heavy-gauge DC cables (minimum 25mm²), proper grounding, and secure mounting in ventilated location. Not intended for casual consumer use—designed for qualified technicians in professional settings with proper electrical installation and operator training. Lithium Battery Compatibility: Verify lithium battery compatibility before use. Battery must have compatible BMS accepting 14.6V charge voltage and permit external charging. Consult lithium battery manufacturer confirming CTEK PRO120 compatibility. For lead-acid batteries, compatibility is universal. Suitable for Large Batteries Only: Designed for battery banks 200-1000Ah. Smaller batteries (under 200Ah) may be stressed by 120A current—use lower-current chargers instead. Calculate charge time: (Battery Ah × Discharge %) ÷ 120A = Hours. Ventilation Essential: High-current charging generates significant heat. Install charger with unrestricted airflow, ensure battery area adequately ventilated preventing hydrogen gas accumulation, never charge in sealed compartments without forced ventilation. Heavy-Gauge Cables Required: Use minimum 25mm² (4 AWG) copper cable, preferably 35mm² for runs over 2 meters. All connections must be professionally crimped or soldered. Install 150A fuse near battery positive connection. Poor connections create fire hazards at 120A current. Key Features 120 Amp High-Current Output - Professional-grade charging current enabling rapid replenishment of large battery banks minimizing equipment downtime in commercial operations. Lead-Acid and Lithium Compatibility - Versatile battery chemistry support including wet/flooded, maintenance-free, AGM, gel, and lithium (LiFePO4/LFP) batteries. Lithium Charging Profile - Dedicated lithium charging mode with appropriate voltage limits (14.6V) and charging algorithm for safe LiFePO4 battery charging. Fully Automatic Multi-Stage Charging - Intelligent charging algorithm adapting to battery type and condition through bulk, absorption, analysis, and maintenance stages. Rapid Charge Times - 120A output dramatically reduces charging time—200Ah battery charges 50% to 100% in approximately 1 hour versus 5+ hours with 20A chargers. Professional Workshop Design - Robust construction, durable components, and industrial-grade build quality withstanding demanding commercial environments. Large Battery Bank Capability - Suitable for battery banks from 200Ah to 1000Ah+ found in marine vessels, commercial vehicles, industrial equipment, and fleet applications. Maximized Battery Capacity - Full saturation charging ensures batteries reach 100% capacity unlike fast chargers achieving only partial charge. Extended Battery Lifespan - Proper charging algorithm and chemistry-specific profiles prevent overcharge/undercharge extending battery service life. Comprehensive Safety Protections - Reverse polarity protection, short circuit proof, spark-free connection, and thermal protection ensuring safe operation. Heavy-Duty Cable Connections - High-current terminals accepting large-gauge cables (25-35mm²) required for 120A current delivery without voltage drop. Automatic Temperature Compensation - Adjusts charge parameters based on ambient temperature ensuring optimal charging in hot and cold environments. Fleet Maintenance Applications - Ideal for fleet operations maintaining multiple vehicle batteries, preparing vehicles for service, and rapid battery conditioning. Marine Facility Use - Perfect for marinas and boat yards servicing large marine battery banks, house batteries, and commercial vessel systems. Industrial Equipment Charging - Suitable for forklifts, floor scrubbers, scissor lifts, and industrial equipment with large 12V battery systems. Caravan and RV Dealerships - Excellent for dealerships preparing stock, servicing customer batteries, and maintaining demonstration vehicle batteries. Mining and Heavy Equipment - Designed for mining operations, construction equipment, and heavy machinery requiring reliable high-current battery charging. Reduced Operational Downtime - Rapid charging returns equipment to service quickly maximizing productivity and equipment utilization rates. Professional Grade Quality - Swedish CTEK engineering and construction standards meeting commercial and industrial application demands. CTEK Quality Engineering - Advanced charging technology from globally recognized professional battery charging system leader. Bainbridge Technologies Support - Distributed by Australia's leading power product experts providing professional installation support, technical assistance, and commercial warranty coverage. Technical Specifications Specification Details Brand CTEK Product Type Professional Battery Charger SKU CTPRO120 (40-230) Model PRO120 Part Number 40-230 Charging Current 120 Amps (Maximum) Input Voltage 220-240V AC, 50Hz Input Current Approximately 8-10A (at 240V AC) Output Voltage 14.4V / 14.7V (Lead-Acid), 14.6V (Lithium) Battery Voltage 12V DC Systems Battery Chemistry Lead-Acid (Wet, Maintenance-Free, AGM, Gel), Lithium (LiFePO4/LFP) Battery Capacity Range 200Ah to 1000Ah+ (Recommended) Charging Modes Fully Automatic Multi-Stage Charging Stages Bulk, Absorption, Analysis, Maintenance Temperature Compensation Automatic Safety Features Reverse Polarity Protected, Short Circuit Proof, Spark-Free, Thermal Protection Operating Temperature -20°C to +50°C Ingress Protection To be determined Recommended DC Cable Size Minimum 25mm² (4 AWG), Preferably 35mm² (2 AWG) Recommended AC Circuit Dedicated 15-20A Circuit with Circuit Breaker Recommended Fuse Size 150A at Battery Connection Cooling Forced Air (Internal Fan) Compliance CE, RCM (Australian Standards) Applications Workshops, Fleet Maintenance, Marine Facilities, Industrial, Mining Product Weight 10.25kg Product Dimensions 400 x 290 x 450mm Distributor Bainbridge Technologies (Australian Owned) Warranty Commercial Warranty (Bainbridge Technologies) Frequently Asked Questions Q: Can I use this charger on my caravan lithium battery or boat lithium house bank? A: The PRO120 has lithium (LiFePO4) charging capability, but you must verify compatibility first. Check that your battery accepts 14.6V charge voltage, has a BMS that permits external charging, and accepts 120A charge current (check manufacturer's "C" rating). Always consult your lithium battery manufacturer before charging. For lead-acid batteries (AGM, flooded, gel), the charger is universally compatible. Q: How long does it take to charge a battery with 120A and what size batteries can I charge? A: Calculate charge time: (Battery Ah × Discharge %) ÷ 120A = Hours. Examples: 200Ah at 50% = ~50 minutes, 400Ah at 50% = ~100 minutes, 600Ah at 75% = ~225 minutes. Suitable for 200-1000Ah batteries. Batteries under 200Ah should use lower-current chargers. The 120A dramatically reduces downtime—a 400Ah bank charges in under 2 hours versus 10+ hours with 40A chargers. Q: What power supply do I need to run this charger? A: Requires dedicated 240V AC circuit with 15-20A circuit breaker. Standard Australian 15A power outlet is sufficient if on dedicated circuit (not shared with other equipment). The charger draws approximately 8-10A from mains during peak charging. Have a qualified electrician verify circuit adequacy if uncertain. Q: Can I leave this connected for maintenance charging or should I disconnect after charging? A: The PRO120 has automatic maintenance mode making it safe for extended connection. However, in busy workshops, disconnect after charging to free the charger for next service. For long-term storage (boats, caravans off-season), the charger can remain connected maintaining optimal charge. Ensure adequate ventilation for long-term charging, especially with flooded batteries. Q: Is this suitable for DIY home use or is it really for professionals only? A: This is professional equipment NOT recommended for typical home use. The 120A output is excessive for consumer batteries (under 200Ah), requires proper electrical installation with heavy-gauge cabling, and demands operator training. Standard CTEK chargers (5-25A) like MXS 5.0 or CT5 Time To Go are appropriate for home use. The PRO120 is only suitable for serious enthusiasts with 400Ah+ battery banks and proper facilities, or professional commercial applications. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CTEK CTWHPRO - Wall Hanger Pro Versatile wall mounting and portable carrying solution for CTEK professional workshop chargers. The CTEK Wall Hanger Pro provides dual-purpose functionality combining secure wall mounting capability using supplied metal bracket with portable carrying option via integrated strap, ideal for workshop environments requiring flexible charger positioning and mobile mechanics needing portable equipment. Compatible with CTEK MXTS 40 and MXTS 70/50 professional workshop chargers, this practical accessory features durable rubber-coated frame providing extra stability protecting charger during transport while preventing vehicle scratches during charging operations. The wall mounting system keeps expensive professional chargers organized, accessible, and safely stored when not in use maximizing workshop efficiency and protecting investment in charging equipment. The integrated carrying strap enables mobile mechanics, service technicians, and fleet maintenance operators to transport charger between service bays, vehicle locations, or job sites without awkward handling or risk of dropping equipment. Perfect for automotive workshops organizing multiple charging stations, mobile mechanics requiring portable professional charging capability, fleet maintenance facilities servicing vehicles across large yards, marine service centers, equipment rental companies, and any professional environment using CTEK MXTS series chargers requiring organized storage and transport flexibility. Distributed by Bainbridge Technologies, Australia's leading power product experts with over 30 years of experience. Product Overview With the WALL HANGER PRO you can mount your CTEK workshop charger on the wall using the supplied metal bracket or you can also use the strap to carry it around with you. The WALL HANGER PROs durable rubber coated frame not only gives your charger extra stability, but also protects your vehicle against scratches. Important Notes: Compatibility Limited to MXTS Models: Designed specifically for CTEK MXTS 40, MXTS 70, and MXTS 50 professional workshop chargers. Not compatible with consumer CTEK models (MXS 5.0, MXS 10, CT5, etc.) or other CTEK charger models. Verify charger model before purchase ensuring proper fit and mounting compatibility. Wall Mounting Hardware Included: Supplied metal bracket requires proper wall installation using appropriate fasteners for wall type (drywall, concrete, brick). Use heavy-duty anchors and screws rated for charger weight ensuring secure mounting preventing charger falling. Follow installation instructions for safe reliable wall mounting. Key Features Wall Mounting Capability - Supplied metal bracket enables secure wall mounting keeping professional chargers organized, accessible, and safely stored in workshop environments. Portable Carrying Strap - Integrated strap allows convenient carrying for mobile mechanics and technicians transporting charger between service bays or job sites. Dual-Purpose Design - Combines wall mounting and portable carrying functionality maximizing versatility for fixed workshop installations and mobile service applications. Durable Rubber-Coated Frame - Protective rubber coating provides extra stability during transport and prevents vehicle scratches during charging operations. MXTS 40 Compatible - Fits CTEK MXTS 40 professional workshop charger providing organized storage and transport solution. MXTS 70/50 Compatible - Fits CTEK MXTS 70 and MXTS 50 professional workshop chargers enabling flexible positioning and mobility. Workshop Organization - Wall mounting keeps charging equipment organized improving workshop efficiency and protecting expensive professional chargers. Vehicle Protection - Rubber coating prevents charger from scratching vehicle paint, panels, or interiors during charging operations. Professional Grade Construction - Robust design withstanding demanding workshop environments and frequent transport between locations. Mobile Mechanic Solution - Carrying strap enables mobile technicians to transport professional chargers to customer locations without awkward handling. Fleet Maintenance Applications - Ideal for fleet facilities servicing vehicles across large yards requiring portable charging capability. Metal Bracket Included - Heavy-duty mounting bracket provides secure wall attachment for permanent workshop installations. CTEK Quality Engineering - Professional accessory designed to CTEK standards ensuring reliable performance and charger protection. Bainbridge Technologies Support - Distributed by Australia's leading power product experts providing local support and warranty coverage. Technical Specifications Specification Details Brand CTEK Product Type Wall Hanger & Carrying Solution SKU CTWHPRO Compatibility CTEK MXTS 40, MXTS 70, MXTS 50 Mounting Type Wall Mount (Metal Bracket Included) Carrying Method Integrated Carrying Strap Frame Material Rubber-Coated Frame Mounting Hardware Metal Bracket Included Applications Workshops, Mobile Mechanics, Fleet Maintenance, Service Centers Vehicle Protection Rubber Coating Prevents Scratches Installation Wall Mounting (Requires Appropriate Fasteners for Wall Type) Product Weight To be determined Product Dimensions To be determined Distributor Bainbridge Technologies (Australian Owned) Warranty Standard Manufacturer Warranty (Bainbridge Technologies) Frequently Asked Questions Q: Will this fit my CTEK MXS 5.0 or CT5 Time To Go charger? A: No, the Wall Hanger Pro is designed specifically for CTEK professional workshop chargers: MXTS 40, MXTS 70, and MXTS 50. It does not fit consumer models like MXS 5.0, MXS 10, CT5 Time To Go, or other CTEK chargers. For consumer charger wall mounting, check if CTEK offers specific wall mounting accessories for those models. Q: What's included and do I need to buy additional mounting hardware? A: The Wall Hanger Pro includes the rubber-coated frame, metal wall mounting bracket, and integrated carrying strap. You need to supply appropriate fasteners (screws/anchors) for your specific wall type. For drywall, use heavy-duty wall anchors rated for charger weight. For concrete/brick, use masonry anchors. Choose fasteners appropriate for wall material and charger weight ensuring secure mounting. Q: Can I use this for both wall mounting and portable carrying? A: Yes, the dual-purpose design allows both. Install the metal bracket on your workshop wall, then insert charger in Wall Hanger Pro and mount to bracket for storage. When you need portability, simply lift charger with Wall Hanger Pro off the wall bracket and use the carrying strap for transport. This flexibility is ideal for workshops with fixed charging stations that occasionally require mobile charging capability. Q: How does the rubber coating protect my vehicle? A: The durable rubber-coated frame prevents the charger from scratching vehicle paint, panels, or interior surfaces if charger accidentally contacts vehicle during charging operations. This is particularly important in busy workshops where chargers may be placed on fenders, hoods, or seats while connecting cables. The rubber provides cushioned protection for both the charger and vehicle surfaces. Q: Is this necessary or can I just use the charger without it? A: The Wall Hanger Pro is optional but provides significant benefits: organized workshop storage keeping expensive professional chargers secure and accessible, protection against workshop damage from chargers left on benches or floor, convenient carrying solution for mobile applications, and vehicle protection during charging. For fixed workshop installations where chargers remain in one location, wall mounting improves organization. For mobile mechanics, the carrying strap is invaluable. While not strictly necessary, it enhances professional charger utility and longevity.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

CTEK M25 25A Marine Charger - Professional High-Power Marine Battery Charger with Temperature Compensation and Lithium Compatibility Professional high-power 25 amp marine battery charger engineered specifically for boat owners requiring quick effective charging of larger service batteries, house battery banks, and demanding marine electrical systems. The CTEK M25 delivers powerful 25A charging current enabling rapid charging of substantial marine battery installations from 40-500Ah capacity significantly reducing charging time compared to lower-current chargers and ensuring boats remain ready for immediate use after shore power charging or generator operation. Advanced temperature compensation technology continuously monitors ambient temperature and automatically adjusts charging parameters optimizing charge acceptance and battery health when temperature deviates from ideal 25°C conditions, critical capability for marine environments experiencing wide temperature variations from cold morning departures through hot afternoon sun exposure or seasonal operation from winter through summer conditions. Dedicated lithium battery mode supports modern LiFePO4 (lithium iron phosphate) batteries increasingly popular in marine applications for their superior energy density, cycle life, and performance characteristics, making M25 suitable for both traditional lead-acid and contemporary lithium battery installations. Integrated Recond mode employs advanced reconditioning techniques restoring performance of deeply discharged wet cell and calcium-calcium batteries common in marine service battery applications recovering seemingly depleted batteries and maximizing return on substantial marine battery investments. Marine-optimized design includes extended 4-meter cable with M10 eyelet terminals facilitating permanent installation in boats where battery banks often locate distant from shore power connection points or charging locations, eliminating need for extension cables or cable modifications during installation. Perfect for cruising sailboats with large house battery banks, motor yachts with substantial electrical demands, liveaboard vessels requiring reliable battery charging infrastructure, sportfishing boats with extensive electronics and refrigeration systems, or any marine application where fast reliable charging of larger battery installations is essential for operational readiness and electrical system performance. Manufactured by CTEK, global leader in battery charging technology with extensive marine charging expertise ensuring Swedish engineering quality, marine environment durability, and reliability appropriate for demanding saltwater applications where equipment failures can compromise safety and vessel operations. Product Overview The CTEK M25 addresses specific challenges in marine battery charging where larger service battery banks, temperature variations, diverse battery chemistries, and installation requirements demand purpose-designed marine charging solution beyond basic automotive chargers adapted for boat use. Marine service batteries typically range 200-500Ah capacity supporting substantial electrical loads including refrigeration, lighting, electronics, communications equipment, entertainment systems, and various onboard systems operating during anchoring or mooring when engine alternator charging unavailable. These large capacity battery banks require substantial charging current for reasonable charging times - 25 amp capability enables charging 200Ah battery bank from 50% discharge in approximately 4-6 hours compared to 12-18 hours with common 7-8 amp chargers, critical difference when shore power access limited or generator runtime considerations important. Marine environments experience significant temperature variations affecting battery performance and charge acceptance from cool morning temperatures potentially below 10°C through midday cabin temperatures exceeding 40°C in tropical climates or enclosed engine rooms - temperature compensation ensures optimal charging parameters throughout these variations maintaining charging effectiveness and protecting battery longevity. The inclusion of lithium battery mode recognizes increasing adoption of LiFePO4 batteries in marine applications where weight savings, cycle life advantages, and performance characteristics justify premium investment for serious cruising vessels, making M25 future-compatible with evolving marine battery technology trends. Key Features and Benefits Powerful 25A Fast Charging Current – High 25 amp charging capability enables rapid charging of large marine service battery banks from 40-500Ah capacity significantly reducing time to full charge compared to lower-current alternatives. Fast charging particularly valuable in marina situations where shore power time may be limited by slip rental terms, transient docking charges by hour, or departure schedules requiring prompt battery replenishment. Twenty-five amp output brings substantially depleted 300Ah house battery bank to full charge overnight or during day while boat occupied for provisioning and trip preparation, versus multiple days required with inadequate charging current. High current also supports bulk charging phase where batteries accept maximum current enabling efficient energy transfer during period of highest charge acceptance. Integrated Temperature Compensation – Advanced temperature sensor continuously monitors ambient temperature and automatically adjusts charging voltage compensating for temperature effects on battery chemistry and charge acceptance. Cold batteries require higher charging voltage for complete charging as chemical reactions slow at low temperatures, while warm batteries need reduced voltage preventing overcharging and excessive gassing as reactions accelerate. Temperature compensation ensures optimal charging throughout seasonal operation from winter boating in cool conditions through summer operation in hot climates, or daily variations from cool morning charging through warm afternoon temperatures. Proper temperature-adjusted charging maximizes battery capacity, prevents sulfation in undercharged batteries, and avoids overcharge damage in warm conditions extending battery service life significantly. Dedicated Lithium Battery Mode – Specialized charging profile specifically designed for 12V LiFePO4 (lithium iron phosphate) batteries supporting modern lithium installations in recreational and cruising vessels. Lithium mode provides appropriate charging voltage (typically 14.4-14.6V), proper current management, and algorithm suitable for lithium battery management system (BMS) operation ensuring safe effective charging without triggering BMS protection shutdowns common when using lead-acid chargers on lithium batteries. Lithium compatibility makes M25 future-proof investment supporting battery technology upgrades without requiring charger replacement, or supporting mixed battery systems where both lithium and lead-acid batteries exist in vessel electrical system during transition period. Recond Mode for Battery Recovery – Dedicated reconditioning program restores performance of deeply discharged wet cell and calcium-calcium batteries through controlled high-voltage pulse charging breaking down sulfation and conditioning battery plates. Marine service batteries frequently subjected to deep discharge cycles during extended anchoring, multi-day passages, or winter storage periods where reconditioning capability recovers battery capacity avoiding premature replacement of expensive marine battery banks. Calcium-calcium (Ca/Ca) battery support particularly important as many modern marine batteries use calcium-alloy grids for improved performance, and these batteries benefit from specialized reconditioning addressing their specific chemistry requirements. Successful reconditioning often recovers 20-40% capacity in degraded batteries extending service life multiple seasons. Marine-Optimized 4 Meter Cable with M10 Eyelets – Extended 4-meter (13 feet) cable length accommodates typical marine battery installation locations often distant from shore power connections or preferred charger mounting locations. Length eliminates need for extension cables, intermediate connections, or cable modifications maintaining optimal electrical connection quality and reducing voltage drop between charger and batteries. M10 eyelet terminals provide secure permanent connection to battery terminals appropriate for marine vibration environment and enabling clean professional installation. Eyelet connections superior to temporary clamps for permanent shore power charging installations providing consistent connection quality, preventing accidental disconnection, and maintaining reliable electrical contact throughout charging cycles and vessel operation. Multi-Stage Automatic Charging Algorithm – Sophisticated automatic charging process manages entire charge cycle from initial battery assessment through long-term maintenance without user intervention beyond connection and mode selection. Multi-stage charging includes desulfation conditioning, bulk charging at maximum current, absorption charging bringing batteries to 100% capacity, analysis verifying battery health, and float maintenance for long-term connection during slip storage or between outings. Automatic operation eliminates charging complexity and user error enabling confident effective charging by boat owners regardless of technical expertise while ensuring professional-grade charging quality protecting valuable marine battery investments. 40-500Ah Capacity Range – Broad capacity range covers diverse marine battery installations from modest 40-60Ah engine start batteries and small auxiliary battery systems through substantial 300-500Ah house battery banks common in cruising sailboats, trawlers, and larger powerboats. Single charger handles everything from weekend coastal cruiser with moderate electrical needs through serious offshore cruising vessel with extensive electrical system demands. Wide capacity range also supports maintenance charging of smaller batteries or bulk charging of very large installations making M25 versatile solution for mixed battery configurations often found in marine applications with separate engine start batteries, house battery banks, and auxiliary battery systems. Professional Marine-Grade Construction – Rugged construction with appropriate environmental protection withstands harsh marine environments including humidity exposure, salt air corrosion potential, temperature variations, vibration from vessel operation and wave action, and general durability requirements for equipment permanently installed in boats. While not submersion-rated, marine-grade construction handles typical boating environment exposure ensuring reliable long-term operation in conditions that would degrade consumer-grade chargers designed for benign automotive garage environments. Professional quality appropriate for critical marine electrical infrastructure where charger failure could leave vessel without power in remote anchorages or compromise electrical system during extended cruising. Technical Specifications Specification Details Model M25 SKU CTM25 Product Type High-Power Marine Battery Charger Brand CTEK (Swedish Engineering) Charging Current 25 Amps (Maximum) System Voltage 12V DC Battery Capacity Range 40-500Ah Battery Types Lead-Acid (Wet, AGM, Gel, Ca/Ca), Lithium (LiFePO4) Temperature Compensation Yes (Automatic) Reference Temperature 25°C (Compensates for Deviations) Lithium Mode Yes (12V LiFePO4, Li-Fe, Li-iron, LFP) Recond Mode Yes (Wet and Ca/Ca Batteries) Charging Algorithm Multi-Stage Fully Automatic Cable Length 4 Meters (13 feet) Connection Type M10 Eyelet Terminals Typical Applications Marine Service Batteries, House Battery Banks, Cruising Vessels, Motor Yachts, Sailboats Environmental Design Marine-Grade Construction Safety Features Spark-Proof, Reverse-Polarity Protected, Overcharge Protected User Interface Automatic with Mode Selection Installation Permanent Marine Installation Warranty Per CTEK Warranty Policy Manufacturing Origin Swedish Engineering (CTEK) Frequently Asked Questions Q: Can the M25 charge multiple batteries connected in parallel or only single batteries? A: Yes, the M25 can charge multiple 12V batteries connected in parallel as they electrically function as single larger capacity battery. For example, two 200Ah batteries in parallel create 400Ah system charged as single unit. This is common configuration in marine house battery banks where multiple 6V batteries in series/parallel or multiple 12V batteries in parallel create desired capacity. Ensure total parallel battery bank capacity falls within M25's 40-500Ah range for optimal charging. Note: M25 charges 12V systems only - it cannot charge 24V systems created by series-connected 12V batteries. For 24V systems, different charger required, or batteries must be disconnected from series configuration and charged individually as 12V batteries. Q: How does temperature compensation actually work and why is it important? A: Temperature sensor monitors ambient temperature near batteries and automatically adjusts charging voltage based on temperature deviation from reference 25°C. For every degree Celsius above 25°C, charging voltage typically reduces by approximately 0.03V (varies by algorithm) preventing overcharging in warm conditions. Conversely, below 25°C, voltage increases compensating for slower chemical reactions at low temperatures ensuring complete charging. Without compensation, batteries charged at 10°C with room-temperature voltage settings may reach only 80-90% capacity (sulfation risk), while batteries charged at 40°C may experience overcharging causing gassing, electrolyte loss, and potential thermal damage. Temperature compensation maintains optimal charging throughout 0-40°C typical marine operating range maximizing battery health and performance across all conditions. Q: What's the difference between wet cell and Ca/Ca batteries, and why do they need Recond mode? A: Wet cell (flooded lead-acid) batteries use traditional lead-antimony or lead-calcium grids with liquid electrolyte requiring occasional water addition. Ca/Ca (calcium-calcium) batteries use calcium-alloy positive and negative grids in sealed construction marketed as maintenance-free, low self-discharge batteries popular in marine applications. Both battery types can develop lead sulfate crystallization during deep discharge or storage reducing capacity and performance. Recond mode uses controlled high-voltage pulses (typically 15.8-16V) breaking down sulfate crystals and reconditioning plates restoring capacity. Ca/Ca batteries particularly benefit from specific reconditioning addressing their chemistry characteristics. AGM and gel batteries typically don't benefit as much from reconditioning due to their different construction and failure modes, though attempting reconditioning on these types is safe and charger will determine if effective. Q: Can I leave the M25 connected permanently at my marina slip for continuous maintenance? A: Yes, the M25 is designed for permanent connection with long-term maintenance capability ideal for marina slip installations. After completing initial charge cycle, charger automatically enters maintenance mode providing optimal maintenance voltage preventing self-discharge without overcharging. Permanent connection keeps batteries fully charged and maintained during weeks or months between boat use preventing sulfation, maintaining capacity, and ensuring vessel electrical systems ready for immediate use. The 4-meter cable with eyelet connections specifically designed for permanent installation rather than temporary charging. Many boat owners install M25 permanently at slip with shore power connection enabling automatic battery maintenance whenever shore power connected. This maintenance capability extends battery life significantly compared to allowing batteries to sit discharged between outings causing sulfation damage. Q: Should I use lithium mode or lead-acid mode if I have both battery types on my boat? A: If your boat has both lithium and lead-acid batteries, you need to choose which battery type to charge as M25 can only charge one chemistry at a time with single mode selection. Common solutions include: installing separate dedicated chargers for each battery chemistry (preferred for mixed systems with substantial capacity in both types), prioritizing lithium batteries with M25 in lithium mode and using separate charger for lead-acid, or using M25 primarily for largest/most critical battery bank with alternative charging for other batteries. For vessels transitioning from lead-acid to lithium, you might temporarily have mixed system during transition period. The safest approach for mixed chemistry systems is separate dedicated chargers ensuring each battery type receives appropriate charging profile maximizing performance and longevity for both investments. Consult with marine electrical specialist about optimal configuration for your specific mixed battery installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less