Aerpro APC157 Tailgate Handle Reverse Camera Nissan Navara D23 A clean, OEM-style reverse camera solution for the Nissan Navara D23, the APC157 replaces the factory tailgate handle to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC157 is Aerpro's vehicle-specific tailgate handle reverse camera, engineered exclusively for Nissan Navara D23 models from 2015-on. It replaces the factory tailgate handle directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The durable metal housing integrates with the vehicle's original exterior styling for a clean, factory-matched appearance. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC157 performs reliably in all weather and climate conditions. Please note that the APC157 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Nissan Navara D23 Specific Fitment: Engineered exclusively for the Nissan Navara D23 (2015-on), the APC157 is a direct OEM replacement for the factory tailgate handle, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Tailgate Handle Replacement Design: The camera mounts discreetly in place of the factory tailgate handle without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, off-road conditions, and wash-down environments typical of ute applications. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC157 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Durable Metal Housing: The metal housing construction provides structural resilience to withstand the demands of daily ute use, including exposure to impact, vibration, and harsh outdoor conditions. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the tailgate to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC157 Brand Aerpro Compatible Vehicle Nissan Navara D23, 2015-on Installation Position Tailgate Handle (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC157 Tailgate Handle Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC157 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Nissan Navara D23. Note that the APC157 is not compatible with the factory Nissan Navara head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC157 compatible with Nissan Navara models other than the D23? No. The APC157 is specifically engineered for the Nissan Navara D23 from 2015-on. Earlier Navara models use a different tailgate handle profile and are not compatible with this camera. Confirm your vehicle's model and build date before purchase. Is the APC157 compatible with the factory Nissan Navara head unit? No. The APC157 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Nissan Navara D23. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. Does replacing the tailgate handle affect the handle's open and close function? The APC157 is a direct OEM replacement for the factory tailgate handle, designed to maintain the original handle's functionality while integrating the reverse camera into the housing. The tailgate open and close function is retained after installation. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC156 Tailgate Handle Reverse Camera Nissan Navara D40 A clean, OEM-style reverse camera solution for the Nissan Navara D40, the APC156 replaces the factory tailgate handle to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC156 is Aerpro's vehicle-specific tailgate handle reverse camera, engineered exclusively for Nissan Navara D40 models from 2007-2015. It replaces the factory tailgate handle directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The durable metal housing integrates with the vehicle's original exterior styling for a clean, factory-matched appearance. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC156 performs reliably in all weather and climate conditions. Please note that the APC156 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Nissan Navara D40 Specific Fitment: Engineered exclusively for the Nissan Navara D40 (2007-2015), the APC156 is a direct OEM replacement for the factory tailgate handle, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Tailgate Handle Replacement Design: The camera mounts discreetly in place of the factory tailgate handle without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, off-road conditions, and wash-down environments typical of ute applications. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC156 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Durable Metal Housing: The metal housing construction provides structural resilience to withstand the demands of daily ute use, including exposure to impact, vibration, and harsh outdoor conditions. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the tailgate to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC156 Brand Aerpro Compatible Vehicle Nissan Navara D40, 2007-2015 Installation Position Tailgate Handle (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC156 Tailgate Handle Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC156 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Nissan Navara D40. Note that the APC156 is not compatible with the factory Nissan Navara head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Nissan Navara D23 models from 2015-on, the APC157 is the correct alternative. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC156 and the APC157? Both cameras are engineered for the Nissan Navara as tailgate handle replacements and share the same specification, output options, and installation approach. The APC156 is designed for the D40 generation (2007-2015), while the APC157 is designed for the D23 generation (2015-on). The tailgate handle profile differs between the two generations, so confirm your vehicle's model generation before purchase. Is the APC156 compatible with Nissan Navara models other than the D40? No. The APC156 is specifically engineered for the Nissan Navara D40 from 2007-2015. Other Navara generations use a different tailgate handle profile and are not compatible with this camera. For the D23 generation from 2015-on, the APC157 is the correct model. Is the APC156 compatible with the factory Nissan Navara head unit? No. The APC156 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Nissan Navara D40. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC155C Chrome Tailgate Handle Reverse Camera Toyota Hilux A clean, factory-matched reverse camera solution for the Toyota Hilux, the APC155C replaces the factory tailgate handle to deliver a 105° rear view with AHD 720P output, IP68 waterproofing, and a chrome finish that matches factory chrome-trimmed handles. Product Overview The APC155C is Aerpro's vehicle-specific tailgate handle reverse camera, engineered exclusively for Toyota Hilux models from 2015-on. It replaces the factory tailgate handle directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The chrome metal housing is designed to match factory chrome-trimmed tailgate handles, delivering a factory-matched aesthetic that integrates with the vehicle's original exterior styling without any visible compromise. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC155C performs reliably in all weather and climate conditions. The APC155C can also be adapted to display on the original factory Toyota Hilux screen using a compatible display adaptor sold separately. Pre-2020 models require the APVTY12 adaptor, and post-2020 models require the APVTY14 adaptor. Features & Benefits Toyota Hilux Specific Fitment: Engineered exclusively for the Toyota Hilux (2015-on), the APC155C is a direct OEM replacement for the factory tailgate handle, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Tailgate Handle Replacement Design: The camera mounts discreetly in place of the factory tailgate handle without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. Chrome Finish Housing: The chrome metal housing is specifically designed to match factory chrome-trimmed tailgate handles on the Toyota Hilux, delivering a polished, factory-matched aesthetic that is indistinguishable from the original hardware at a glance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, off-road conditions, and wash-down environments typical of ute applications. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC155C operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Chrome Metal Housing: The durable chrome metal construction provides both a factory-matched finish and the structural resilience needed to withstand the demands of daily ute use, including exposure to impact, vibration, and harsh outdoor conditions. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the tailgate to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Adaptable to Factory Screen: The APC155C can be connected to display on the original Toyota Hilux factory screen using a compatible display adaptor sold separately. Pre-2020 models require the APVTY12 and post-2020 models require the APVTY14. Technical Specs Specification Detail SKU APC155C Brand Aerpro Compatible Vehicle Toyota Hilux, 2015-on Finish Chrome Installation Position Tailgate Handle (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Chrome Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen Yes (adaptor sold separately, model year dependent) Factory Screen Adaptor Compatibility Model Year Required Adaptor Toyota Hilux 2015-2019 APVTY12 (sold separately) Toyota Hilux 2020-on APVTY14 (sold separately) What's in the Box 1x APC155C Chrome Tailgate Handle Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC155C connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Toyota Hilux. For installations retaining the factory Toyota Hilux screen, the correct display adaptor must be sourced separately based on the vehicle's model year: APVTY12 for pre-2020 models and APVTY14 for post-2020 models. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC155C and a standard black tailgate handle camera for the Toyota Hilux? The APC155C is identical in function and specification to its black finish counterpart but features a chrome metal housing designed to match factory chrome-trimmed tailgate handles on the Toyota Hilux. If the vehicle's tailgate handle is finished in black rather than chrome, a black finish variant may be more appropriate for a factory-matched aesthetic. Confirm the finish of the factory tailgate handle on the specific vehicle before purchase. Can the APC155C display on the factory Toyota Hilux screen? Yes, with an additional adaptor sold separately. Pre-2020 Toyota Hilux models require the APVTY12 display adaptor, and post-2020 models require the APVTY14. Confirm the vehicle's model year before purchasing the adaptor to ensure correct compatibility. Does replacing the tailgate handle affect the handle's open and close function? The APC155C is a direct OEM replacement for the factory tailgate handle, designed to maintain the original handle's functionality while integrating the reverse camera into the housing. The tailgate open and close function is retained after installation. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC154 Tailgate Handle Reverse Camera Volkswagen Amarok A clean, OEM-style reverse camera solution for the Volkswagen Amarok, the APC154 replaces the factory tailgate handle to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC154 is Aerpro's vehicle-specific tailgate handle reverse camera, engineered exclusively for Volkswagen Amarok models from 2011-2022. It replaces the factory tailgate handle directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The durable metal housing integrates with the vehicle's original exterior styling for a clean, factory-matched appearance. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. A rubber gasket is also included to ensure a weatherproof seal at the mounting location. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC154 performs reliably in all weather and climate conditions. Please note that the APC154 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Amarok Specific Fitment: Engineered exclusively for the Volkswagen Amarok (2011-2022), the APC154 is a direct OEM replacement for the factory tailgate handle, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Tailgate Handle Replacement Design: The camera mounts discreetly in place of the factory tailgate handle without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, off-road conditions, and wash-down environments typical of ute applications. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC154 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Durable Metal Housing: The metal housing construction provides structural resilience to withstand the demands of daily ute use, including exposure to impact, vibration, and harsh outdoor conditions. Includes Rubber Gasket: A rubber gasket is included to create a weatherproof seal between the camera housing and the tailgate handle mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the tailgate to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC154 Brand Aerpro Compatible Vehicle Volkswagen Amarok, 2011-2022 Installation Position Tailgate Handle (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Metal Operating Voltage 9-16V DC Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Adaptable to Factory Screen No What's in the Box 1x APC154 Tailgate Handle Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Rubber Gasket Goes Well With The APC154 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Amarok. Note that the APC154 is not compatible with the factory Volkswagen Amarok head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC154 compatible with Volkswagen Amarok models outside the 2011-2022 range? No. The APC154 is specifically engineered for the Volkswagen Amarok from 2011-2022. Amarok models outside this year range may use a different tailgate handle profile and are not confirmed as compatible with this camera. Confirm your vehicle's model year before purchase. Is the APC154 compatible with the factory Volkswagen Amarok head unit? No. The APC154 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Volkswagen Amarok. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. Does replacing the tailgate handle affect the handle's open and close function? The APC154 is a direct OEM replacement for the factory tailgate handle, designed to maintain the original handle's functionality while integrating the reverse camera into the housing. The tailgate open and close function is retained after installation. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC45 Tailgate Handle Reverse Camera Mitsubishi Triton MN A clean, OEM-style reverse camera solution for the Mitsubishi Triton MN, the APC45 replaces the factory tailgate handle to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC45 is Aerpro's vehicle-specific tailgate handle reverse camera, engineered exclusively for Mitsubishi Triton MN (GLX-R) models from 2009-2014. It replaces the factory tailgate handle directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The combined ABS and metal housing provides a durable, factory-matched appearance that integrates with the vehicle's original exterior styling. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a plastic clip for installation. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC45 performs reliably in all weather and climate conditions. Please note that the APC45 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Mitsubishi Triton MN Specific Fitment: Engineered exclusively for the Mitsubishi Triton MN GLX-R (2009-2014), the APC45 is a direct OEM replacement for the factory tailgate handle, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Tailgate Handle Replacement Design: The camera mounts discreetly in place of the factory tailgate handle without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, off-road conditions, and wash-down environments typical of ute applications. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC45 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Durable ABS and Metal Housing: The combined ABS and metal housing construction provides the structural resilience needed to withstand the demands of daily ute use, including exposure to impact, vibration, and harsh outdoor conditions. Includes 10-Metre Heavy Duty Cable, 4-Pin to RCA Adapter, and Plastic Clip: The 10-metre extension cable provides ample reach from the tailgate to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs. A plastic clip is also included to assist with cable management during installation. Technical Specs Specification Detail SKU APC45 Brand Aerpro Compatible Vehicle Mitsubishi Triton MN (GLX-R), 2009-2014 Installation Position Tailgate Handle (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS / Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC45 Tailgate Handle Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Plastic Clip Goes Well With The APC45 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Mitsubishi Triton MN. Note that the APC45 is not compatible with the factory Mitsubishi Triton head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC45 compatible with Mitsubishi Triton models outside the MN 2009-2014 range? No. The APC45 is specifically engineered for the Mitsubishi Triton MN GLX-R from 2009-2014. Other Triton generations use a different tailgate handle profile and are not compatible with this camera. Confirm your vehicle's model generation and build date before purchase. Is the APC45 compatible with the factory Mitsubishi Triton head unit? No. The APC45 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Mitsubishi Triton MN. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. Does replacing the tailgate handle affect the handle's open and close function? The APC45 is a direct OEM replacement for the factory tailgate handle, designed to maintain the original handle's functionality while integrating the reverse camera into the housing. The tailgate open and close function is retained after installation. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC22 Tailgate Handle Reverse Camera Ford Ranger Mazda BT-50 A clean, OEM-style reverse camera solution for the Ford Ranger and Mazda BT-50, the APC22 replaces the factory tailgate handle to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC22 is Aerpro's vehicle-specific tailgate handle reverse camera, engineered for Ford Ranger PX (2012-2015), PX MkII (2015-2018), and PX MkIII (2018-2021) models, as well as Mazda BT-50 (2012-2018). It replaces the factory tailgate handle directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The durable metal housing integrates with the vehicle's original exterior styling for a clean, factory-matched appearance. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC22 performs reliably in all weather and climate conditions. The APC22 can also be adapted to display on the original factory screen in Ford Ranger models equipped with a 4.2" factory display using the optional APVFD03 adaptor, sold separately. Features & Benefits Ford Ranger and Mazda BT-50 Specific Fitment: Engineered for Ford Ranger PX, PX MkII, and PX MkIII models from 2012-2021 and Mazda BT-50 from 2012-2018, the APC22 is a direct OEM replacement for the factory tailgate handle, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Tailgate Handle Replacement Design: The camera mounts discreetly in place of the factory tailgate handle without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, off-road conditions, and wash-down environments typical of ute applications. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC22 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Durable Metal Housing: The metal housing construction provides structural resilience to withstand the demands of daily ute use, including exposure to impact, vibration, and harsh outdoor conditions. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the tailgate to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Adaptable to Factory Screen: Ford Ranger models equipped with a 4.2" factory display can connect the APC22 to display on the original factory screen using the optional APVFD03 display adaptor, sold separately. Technical Specs Specification Detail SKU APC22 Brand Aerpro Compatible Vehicles Ford Ranger PX (2012-2015), PX MkII (2015-2018), PX MkIII (2018-2021), Mazda BT-50 (2012-2018) Installation Position Tailgate Handle (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen Yes (Ford Ranger with 4.2" display requires APVFD03, sold separately) Factory Screen Adaptor Compatibility Vehicle Condition Required Adaptor Ford Ranger PX / PX MkII / PX MkIII Equipped with 4.2" factory display APVFD03 (sold separately) Mazda BT-50 Not adaptable to factory screen N/A What's in the Box 1x APC22 Tailgate Handle Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC22 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for both the Ford Ranger and Mazda BT-50. For Ford Ranger models with a 4.2" factory display where the factory screen is to be retained, the optional APVFD03 display adaptor is required and sold separately. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Does the APC22 fit both the Ford Ranger and Mazda BT-50? Yes. The APC22 is compatible with Ford Ranger PX (2012-2015), PX MkII (2015-2018), and PX MkIII (2018-2021) as well as Mazda BT-50 (2012-2018). These vehicles share a common tailgate handle profile across the listed model years, making the APC22 a direct OEM replacement for both platforms. Can the APC22 display on the factory Ford Ranger screen? Yes, for Ford Ranger models equipped with a 4.2" factory display. The APVFD03 display adaptor is required and sold separately to connect the APC22 to the original factory screen. Confirm whether your specific Ranger is fitted with the 4.2" display before purchasing the adaptor. For Mazda BT-50 models, factory screen adaptation is not supported. Does replacing the tailgate handle affect the handle's open and close function? The APC22 is a direct OEM replacement for the factory tailgate handle, designed to maintain the original handle's functionality while integrating the reverse camera into the housing. The tailgate open and close function is retained after installation. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC164D Dual Lens Brake Light Reverse Camera Mercedes Sprinter Comprehensive rear vision for the Mercedes Sprinter with twin rear doors, the APC164D supplies two complete brake light replacement camera sets in a single kit for full OEM-style coverage with AHD 720P output and IP68 waterproofing. Product Overview The APC164D is Aerpro's vehicle-specific dual brake light reverse camera kit, engineered exclusively for Mercedes Sprinter models from 2007-2020. It is supplied as a dual camera kit, with two complete camera sets included to provide comprehensive rear vision coverage across both rear brake light positions, ideal for Sprinter vehicles configured with twin rear doors. Each camera replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 100-110° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output on each camera is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with dual AHD camera inputs, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. Each camera includes a 10-metre heavy duty 4-pin extension cable and a 4-pin to RCA adapter. A foam gasket and rubber O-ring are also included to ensure weatherproof sealing at the mounting locations. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, both cameras perform reliably in all weather and climate conditions. The APC164D can be adapted to display on the original factory Mercedes Sprinter screen using a compatible display adaptor sold separately. Models from 2007-2018 require the APVEU11, while 2018-2020 models require either the APVMC22 or APVMC23 depending on the factory radio fitted. Features & Benefits Mercedes Sprinter Specific Fitment: Engineered exclusively for the Mercedes Sprinter (2007-2020), the APC164D provides direct OEM replacement for both factory brake light housings, delivering a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Dual Camera Kit for Twin Rear Door Coverage: The APC164D includes two complete camera sets, providing independent rear vision coverage from both brake light positions simultaneously. This makes it the ideal solution for Sprinter vehicles in twin rear door configuration where a single camera provides only partial rear visibility. Brake Light Housing Replacement, No Drilling Required: Both cameras install within the factory brake light positions without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 100-110° Wide Diagonal Viewing Angle: The wide viewing angle on each camera reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire on each camera during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire on each camera, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion on both cameras, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, both cameras operate dependably in extreme cold and high-heat environments, making them suitable for use across all Australian climates and seasons. Robust ABS Housing: Both camera housings are constructed from ABS plastic, providing lightweight yet durable enclosures that resist the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket and Rubber O-Ring: A foam gasket and rubber O-ring are included to create weatherproof seals at the mounting locations, preventing water and dust ingress at both brake light installation points. Includes 2x 10-Metre Heavy Duty Cables and 2x 4-Pin to RCA Adapters: Each camera is supplied with its own 10-metre extension cable and 4-pin to RCA adapter, providing independent routing and connection options for both cameras to the head unit or monitor. Adaptable to Factory Screen: Both cameras can be adapted to display on the original Mercedes Sprinter factory screen using a compatible display adaptor sold separately. Models from 2007-2018 require the APVEU11, and 2018-2020 models require the APVMC22 or APVMC23 depending on the factory radio fitted. Technical Specs Specification Detail SKU APC164D Brand Aerpro Compatible Vehicle Mercedes Sprinter, 2007-2020 Kit Configuration Dual Camera Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 100-110° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA per camera Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) per camera Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen Yes (adaptor sold separately, model year dependent) Factory Screen Adaptor Compatibility Model Year Required Adaptor Mercedes Sprinter 2007-2018 APVEU11 (sold separately) Mercedes Sprinter 2018-2020 APVMC22 or APVMC23 (sold separately, factory radio dependent) What's in the Box 2x APC164D Brake Light Reverse Cameras 2x 10-metre Video Cables (4-pin heavy duty) 2x 4-pin to RCA Adapter Cables Foam Gasket Rubber O-ring Goes Well With The APC164D is best paired with a head unit or monitor that supports dual camera inputs, allowing both cameras to be connected and switched between independently. It is compatible with Aerpro Advanced Safety Vision monitors and any aftermarket head unit with dual AHD 720P or dual RCA composite camera inputs. The Aerpro AM705 supports two independent camera inputs (AHD 720P compatible), making it a matched Aerpro solution for the Mercedes Sprinter in twin door configuration. For installations retaining the factory Mercedes Sprinter screen, the correct display adaptor must be sourced separately: APVEU11 for 2007-2018 models and APVMC22 or APVMC23 for 2018-2020 models. Trigger wire activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC164D and the APC164? The APC164 is a single camera kit containing one brake light replacement camera for the Mercedes Sprinter 2007-2020, suited to single rear door configurations or installations where only one camera position is required. The APC164D is a dual camera kit containing two complete camera sets with independent cabling and adapters, designed for twin rear door Sprinter configurations where comprehensive rear coverage from both brake light positions is needed. Does the APC164D require a head unit with two camera inputs? For both cameras to be displayed and switched between independently, a head unit or monitor with two separate camera inputs is recommended. If the connected head unit has only one camera input, the two camera outputs can be combined using a video switch or selector, but this adds complexity to the installation. Confirm the camera input configuration of the connected head unit before purchase. Can the APC164D display on the factory Mercedes Sprinter screen? Yes, with an additional adaptor sold separately. Models from 2007-2018 require the APVEU11 display adaptor. Models from 2018-2020 require either the APVMC22 or APVMC23 depending on the factory radio fitted. Confirm the factory radio type in the vehicle before purchasing the adaptor to ensure correct compatibility. How do I select between AHD 720P and CVBS output on each camera? Video output format is selected independently on each camera via its green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches that camera's output to CVBS composite. Each camera's output format can be set independently to match the specific input type of the connected head unit channel. Can the parking guidelines be turned off on each camera independently? Yes. The white loop wire on each camera controls its parking guidelines independently. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines on that camera. Each camera's guideline setting can be configured independently during installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC182 Brake Light Reverse Camera Mercedes Vito W447 Barn Door A clean, OEM-style reverse camera solution for the Mercedes Vito W447 in barn door configuration, the APC182 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC182 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Mercedes Vito W447 models from 2015-on in barn door configuration. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC182 performs reliably in all weather and climate conditions. The APC182 can also be adapted to display on the original factory Mercedes Vito W447 screen using the optional APVMC23 display adaptor, sold separately. Features & Benefits Mercedes Vito W447 Barn Door Specific Fitment: Engineered exclusively for the Mercedes Vito W447 (2015-on) in barn door configuration, the APC182 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC182 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Adaptable to Factory Screen: The APC182 can be connected to display on the original Mercedes Vito W447 factory screen using the optional APVMC23 display adaptor, sold separately. Technical Specs Specification Detail SKU APC182 Brand Aerpro Compatible Vehicle Mercedes Vito W447, 2015-on Vehicle Configuration Barn Door Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen Yes (requires APVMC23, sold separately) What's in the Box 1x APC182 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC182 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Mercedes Vito W447. For installations retaining the factory Mercedes Vito W447 screen, the optional APVMC23 display adaptor is required and sold separately. For Mercedes Vito W447 models in single door configuration, the APC188 is the correct alternative. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC182 and the APC188? Both cameras are engineered for the Mercedes Vito W447 (2015-on) as brake light housing replacements and share the same specification, output options, and installation approach. The APC182 is designed for barn door vehicle configurations, while the APC188 is designed for single door configurations. The brake light housing profile differs between barn door and single door variants, so confirm your vehicle's door configuration before purchase. Can the APC182 display on the factory Mercedes Vito W447 screen? Yes, with an additional adaptor sold separately. The APVMC23 display adaptor is required to connect the APC182 to the original factory Mercedes Vito W447 screen. Without the APVMC23, the camera connects to an aftermarket head unit or monitor via the included 4-pin to RCA adapter. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. Is a trigger wire included, and is one needed? A trigger wire is not included with the APC182. Reverse camera activation is typically managed through the head unit's reverse trigger input, which is connected to the vehicle's reverse light circuit via the installation harness. Confirm the reverse trigger wiring arrangement with the head unit's installation instructions for the specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC181 Spare Wheel Reverse Camera Jeep Wrangler 2007-On A clean, factory-style reverse camera solution for the Jeep Wrangler, the APC181 mounts discreetly to the factory spare wheel carrier to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without any permanent vehicle modification. Product Overview The APC181 is Aerpro's vehicle-specific spare wheel mounted reverse camera, engineered exclusively for Jeep Wrangler models from 2007-on. Rather than replacing a brake light or tailgate handle, the APC181 mounts directly to the factory spare wheel carrier, providing a seamless installation position that requires no permanent modification to the vehicle. The durable metal housing provides a robust, weather-resistant construction suited to the Wrangler's off-road and outdoor use profile. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter for integration with most aftermarket displays. Built with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC181 performs reliably in all weather and climate conditions. Please note that the APC181 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Jeep Wrangler Specific Fitment: Engineered exclusively for the Jeep Wrangler (2007-on), the APC181 is designed to mount to the factory spare wheel carrier, providing a factory-style installation that integrates with the vehicle's original exterior styling without permanent modification. Spare Wheel Carrier Mount, No Permanent Modification Required: The camera mounts discreetly to the spare wheel carrier without drilling additional holes or making permanent modifications to the vehicle body, making it a clean and reversible installation. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking. The spare wheel carrier position places the camera at a height and angle well suited to capturing the full rear view behind the Wrangler. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, mud, water crossings, and the demanding off-road environments the Jeep Wrangler is regularly used in. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC181 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and off-road conditions. Durable Metal Housing: The metal housing construction provides the structural resilience needed to withstand the vibration, impacts, and harsh outdoor conditions associated with regular off-road use in a Jeep Wrangler. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear spare wheel carrier to the head unit location in the cabin, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC181 Brand Aerpro Compatible Vehicle Jeep Wrangler, 2007-on Installation Position Spare Wheel Mount Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material Metal Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC181 Spare Wheel Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Goes Well With The APC181 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Jeep Wrangler. Note that the APC181 is not compatible with the factory Jeep Wrangler head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Why is the spare wheel carrier used as the mounting position rather than a brake light or tailgate handle? The Jeep Wrangler's rear-mounted spare wheel carrier is the most practical and OEM-compatible camera mounting location for this vehicle. The rear door opens to the side on the Wrangler, meaning a brake light or tailgate handle mount would rotate with the door and not provide a stable rearward-facing view when the door is closed. The spare wheel carrier remains fixed relative to the rear of the vehicle, providing a consistent camera position regardless of door movement. Is the APC181 compatible with Jeep Wrangler models across all generations from 2007-on? The APC181 is specified for Jeep Wrangler models from 2007-on. Confirm your specific Wrangler generation and build year with the supplier before purchase, as spare wheel carrier profile variations between JK (2007-2018) and JL (2018-on) generations may affect fitment. Is the APC181 compatible with the factory Jeep Wrangler head unit? No. The APC181 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Jeep Wrangler. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC179 Brake Light Reverse Camera VW Transporter T5 A clean, OEM-style reverse camera solution for the Volkswagen Transporter T5, the APC179 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC179 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Volkswagen Transporter T5 models from 2004-2015. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a rubber O-ring for a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC179 performs reliably in all weather and climate conditions. Please note that the APC179 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Volkswagen Transporter T5 Specific Fitment: Engineered exclusively for the Volkswagen Transporter T5 (2004-2015), the APC179 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC179 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Rubber O-Ring: A rubber O-ring is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC179 Brand Aerpro Compatible Vehicle Volkswagen Transporter T5, 2004-2015 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC179 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Rubber O-ring Goes Well With The APC179 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Volkswagen Transporter T5. Note that the APC179 is not compatible with the factory Volkswagen Transporter head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Transporter T5 models from 2010-2015 in twin rear door configuration, the APC176 also covers this vehicle range alongside the APC179. Confirm the correct model for your specific Transporter configuration with the supplier. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions How does the APC179 differ from the APC176 for the Volkswagen Transporter? The APC176 covers Volkswagen Transporter T5 (2010-2015), T6 (2016-2019), and T6.1 (2020-on) models in twin rear door configuration. The APC179 is specifically engineered for the Volkswagen Transporter T5 (2004-2015) and covers the earlier T5 production years from 2004 that the APC176 does not. Confirm your vehicle's model year and door configuration with the supplier to determine the correct camera for your specific Transporter. Is the APC179 compatible with the factory Volkswagen Transporter T5 head unit? No. The APC179 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Volkswagen Transporter T5. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the rubber O-ring for? The rubber O-ring is included to create a weatherproof seal between the APC179 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC173 Brake Light Reverse Camera Fiat Ducato Peugeot Boxer A clean, OEM-style reverse camera solution for the Fiat Ducato and Peugeot Boxer, the APC173 replaces the factory brake light housing to deliver a 105° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC173 is Aerpro's vehicle-specific brake light reverse camera, engineered for Fiat Ducato (2015-2021) and Peugeot Boxer (2020-on) models. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 105° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC173 performs reliably in all weather and climate conditions. Please note that the APC173 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Fiat Ducato and Peugeot Boxer Specific Fitment: Engineered for the Fiat Ducato (2015-2021) and Peugeot Boxer (2020-on), the APC173 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 105° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC173 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC173 Brand Aerpro Compatible Vehicle Fiat Ducato (2015-2021), Peugeot Boxer (2020-on) Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 105° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC173 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC173 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Fiat Ducato and Peugeot Boxer. Note that the APC173 is not compatible with the factory head units in either vehicle and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions Is the APC173 compatible with both Fiat Ducato and Peugeot Boxer models? Yes. The APC173 is compatible with Fiat Ducato models from 2015-2021 and Peugeot Boxer models from 2020-on. Both vehicles share a compatible brake light housing profile within these model year ranges. Confirm your vehicle's specific model year before purchase to ensure correct fitment. Is the APC173 compatible with the factory head units in the Fiat Ducato or Peugeot Boxer? No. The APC173 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in either the Fiat Ducato or Peugeot Boxer. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC173 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro APC172 Brake Light Reverse Camera Ford Transit VO A clean, OEM-style reverse camera solution for the Ford Transit VO, the APC172 replaces the factory brake light housing to deliver a 100-110° rear view with AHD 720P output and IP68 waterproofing without drilling a single hole. Product Overview The APC172 is Aerpro's vehicle-specific brake light reverse camera, engineered exclusively for Ford Transit VO models from 2014-2017. It replaces the factory brake light housing directly, providing a seamless OEM-style installation that requires no additional holes to be drilled into the vehicle. The 100-110° diagonal viewing angle reduces rear blind spots during reversing and parking manoeuvres, while selectable parking guidelines (switchable via loop wire) provide visual reference in tight spaces and can be enabled or disabled to suit the driver's preference. Video output is selectable between AHD 720P and CVBS via the loop wire, providing broad compatibility with aftermarket head units including those with AHD camera inputs such as the Aerpro AM705, as well as Aerpro Advanced Safety Vision monitors and standard RCA composite displays. The 4-pin heavy duty camera cable runs 0.5 metres from the camera to the connector, with a 10-metre extension cable included alongside a 4-pin to RCA adapter and a foam gasket to ensure a weatherproof seal at the mounting location. Built from ABS housing with an IP68 waterproof rating and an operating temperature range of -30°C to +80°C, the APC172 performs reliably in all weather and climate conditions. Please note that the APC172 is not compatible with factory head units and cannot be adapted to connect to the original factory radio. Features & Benefits Ford Transit VO Specific Fitment: Engineered exclusively for the Ford Transit VO (2014-2017), the APC172 is a direct OEM replacement for the factory brake light housing, providing a factory-finish installation that integrates seamlessly with the vehicle's original exterior styling. Brake Light Housing Replacement, No Drilling Required: The camera installs within the factory brake light position without the need to drill additional holes into the vehicle body, preserving the vehicle's structural integrity and maintaining a clean appearance. 100-110° Wide Diagonal Viewing Angle: The wide viewing angle reduces the blind spot directly behind the vehicle during reversing and parking, improving situational awareness and driver confidence when manoeuvring in confined spaces. Selectable Parking Guidelines: Visual parking guidelines are switchable via loop wire during installation. The white loop wire controls guideline display and defaults to on. Guidelines can be disabled if the connected head unit provides its own overlay or if the driver prefers an unobstructed view. AHD 720P or CVBS Video Output: Output format is selectable via the green loop wire, defaulting to AHD 720P for compatibility with AHD-capable head units and monitors. Switching to CVBS provides compatibility with standard composite RCA inputs on a wider range of aftermarket displays. IP68 Waterproof Rating: The IP68 rating confirms full protection against dust ingress and continuous water immersion, providing reliable performance in rain, wash-down, and demanding commercial vehicle environments. Wide Operating Temperature Range: Rated from -30°C to +80°C, the APC172 operates dependably in both extreme cold and high-heat environments, making it suitable for use across all Australian climates and seasons. Robust ABS Housing: The camera housing is constructed from ABS plastic, providing a lightweight yet durable enclosure that resists the impacts and vibration of daily commercial vehicle use. Includes Foam Gasket: A foam gasket is included to create a weatherproof seal between the camera housing and the brake light mounting location, preventing water and dust ingress at the installation point. Includes 10-Metre Heavy Duty Cable and 4-Pin to RCA Adapter: The 10-metre extension cable provides ample reach from the rear of the vehicle to the head unit location in most van and commercial vehicle configurations, and the included 4-pin to RCA adapter allows connection to standard RCA camera inputs without additional accessories. Technical Specs Specification Detail SKU APC172 Brand Aerpro Compatible Vehicle Ford Transit VO, 2014-2017 Installation Position Brake Light (OEM Replacement) Camera Orientation Reverse Image Sensor Type CMOS Viewing Angle (Diagonal) 100-110° Minimum Illumination 0.1 Lux Video Output AHD 720P or CVBS (selectable via loop wire) TV System NTSC (CVBS) Parking Guidelines Selectable (loop wire, default: on) Green Loop Wire AHD / CVBS selection (default: AHD) White Loop Wire Guidelines on/off (default: on) Waterproof Rating IP68 Housing Material ABS Operating Voltage 12V DC (9-16V) Current Consumption 450mA Operating Temperature -30°C to +80°C Camera Cable Length 0.5m (camera) + 10m (extension) Connector Type (Camera End) 4-Pin Heavy Duty Female Connector Type (Harness End) 4-Pin Heavy Duty Male (RCA adapter included) Trigger Wire Not included Adaptable to Factory Screen No What's in the Box 1x APC172 Brake Light Reverse Camera 10-metre Video Cable (4-pin heavy duty) 4-pin to RCA Adapter Cable Foam Gasket Goes Well With The APC172 connects directly to any aftermarket head unit with an AHD 720P or standard RCA composite reverse camera input. It is compatible with the Aerpro AM705 head unit, which features a dedicated 720P AHD reverse camera input, providing a matched Aerpro system for the Ford Transit VO. Note that the APC172 is not compatible with the factory Ford Transit VO head unit and cannot be adapted to connect to the original factory radio. An aftermarket head unit is required for this camera to function. For Ford Transit Custom models from 2013-2017, the APC163 is the correct alternative. A trigger wire is not included and reverse trigger activation is managed through the head unit or installation harness. Frequently Asked Questions What is the difference between the APC172 and the APC163? Both cameras are brake light replacement reverse cameras for Ford Transit commercial vehicles sharing the same specification and installation approach. The APC172 is engineered for the Ford Transit VO (2014-2017), while the APC163 is engineered for the Ford Transit Custom (2013-2017). The Transit VO and Transit Custom use different brake light housing profiles, so confirm the correct Transit variant for your vehicle before purchase. Is the APC172 compatible with the factory Ford Transit VO head unit? No. The APC172 is not compatible with factory head units and cannot be adapted to connect to the original factory radio in the Ford Transit VO. An aftermarket head unit with a reverse camera input (AHD 720P or RCA composite) is required for this camera to operate. How do I select between AHD 720P and CVBS output? Video output format is selected via the green loop wire during installation. The default configuration with the loop wire connected is AHD 720P. Cutting or leaving the green loop wire open switches the output to CVBS composite for compatibility with standard RCA camera inputs. Select the output format that matches the camera input type on the connected head unit or monitor before completing the installation. Can the parking guidelines be turned off? Yes. The white loop wire controls the parking guidelines. The default configuration with the white loop wire connected displays fixed guidelines on screen. Cutting or leaving the white loop wire open disables the guidelines. If the connected head unit generates its own dynamic parking guideline overlay, disabling the camera's fixed guidelines prevents a double overlay from appearing on screen. What is the foam gasket for? The foam gasket is included to create a weatherproof seal between the APC172 camera housing and the factory brake light mounting location. It prevents water and dust from entering the mounting aperture around the camera body, which is particularly important in a commercial vehicle environment where the rear of the vehicle is frequently exposed to rain, road spray, and wash-down conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less