6 Metres of Clean Video Signal RCA Male to Female with Power Wire. Product Overview The DNA Automotive RVS006F is a 6 metre RCA video extension cable combining a male RCA plug on one end and a female RCA socket on the other, with an accompanying power wire running the full length. Designed for extending or connecting video signals in vehicle installations reverse cameras, dash cameras, headrest screens, and other 12V AV setups it provides the cable run needed to reach from the camera or source to the display or headunit without splicing or joining shorter cables. The included power wire alongside the video cable simplifies installation in a single cable run both signal and power travel together, keeping the wiring tidy and reducing the number of cables run through door trims, under carpets, and along the headliner. Key Specifications Part Number: RVS006F Brand: DNA Automotive Cable Type: RCA video extension Connector End 1: Male RCA plug Connector End 2: Female RCA socket Includes: Power wire (full length) Cable Length: 6 metres Packaging: Blister & Card Cable Gauge (power wire): Not specified — confirm with supplier Video Signal Type: Composite RCA (confirm with supplier) Shielding: Not specified — confirm with supplier Features & Benefits 6 metre length — reaches where shorter cables can't — At 6 metres, the RVS006F covers most vehicle installations from boot-mounted or tow bar cameras all the way to a headunit or display in the cabin — across utes, SUVs, vans, and caravans without needing to join multiple shorter cables. Male RCA to female RCA — extension or connection — The male-to-female configuration makes this cable suitable for both extending an existing RCA video cable (plug the male end into the female socket of the source cable and run the female end to the display) and for direct point-to-point connection between a male RCA camera output and a female RCA input on a headunit or monitor. Power wire included — single tidy cable run — The accompanying power wire runs the full 6 metres alongside the video cable, allowing both the camera power supply and video signal to be routed together in a single pass through trims and panels. Reduces installation time and cable clutter. Reverse camera and driving aid applications — Purpose-built length for running video signal from a reverse camera, blind spot camera, or tow camera at the rear of a vehicle to a headunit or monitor in the cabin — the primary use case for a 6 metre video cable in an automotive installation. Technical Specs Specification Detail Part Number RVS006F Brand DNA Automotive Cable Type RCA video extension Connector End 1 Male RCA plug Connector End 2 Female RCA socket Power Wire Included — full 6 metre length Cable Length 6 metres Power Wire Gauge Not specified — confirm with supplier Video Signal Not specified — confirm with supplier Shielding Not specified — confirm with supplier Packaging Blister & Card Compatible With / Goes Well With Typical Applications: Reverse camera video signal extension Dash camera video output extension Headrest screen and rear entertainment video feed Tow camera and blind spot camera installations Any 12V AV installation requiring a 6 metre RCA video run Goes Well With: Reverse cameras with RCA video output Aftermarket headunits with RCA video input Rear-view monitors and headrest screens with RCA input DNA Automotive and universal reverse camera accessories Frequently Asked Questions What is this cable used for? The RVS006F is used to extend or connect a composite RCA video signal in vehicle installations — most commonly running video from a rear-mounted reverse or tow camera to a headunit or display in the cabin. Can I use this cable to extend an existing shorter RCA cable? Yes. The male RCA plug connects to the female socket of an existing cable, and the female socket end connects to the display or headunit input, extending the total run by 6 metres. Does the power wire run the full 6 metres alongside the video cable? Yes — the power wire is included and runs the full 6 metres, allowing both video signal and camera power to be routed in a single cable pass through vehicle trims and panels. What is the gauge of the power wire? Power wire gauge is not confirmed in the available product data. Contact us or refer to DNA Automotive's product documentation if cable gauge is a requirement for your installation. Is this cable suitable for a caravan tow camera installation? Yes — at 6 metres, the RVS006F is well suited to tow camera setups where the camera is mounted at the rear of the tow vehicle or on the caravan and the video signal needs to reach a monitor in the cabin. Confirm the total cable run required for your specific tow vehicle and caravan combination before ordering.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4003-PH-D Ford Everest RA 2022+ Phone and UHF Handpiece Holder A vehicle-specific powder coated black phone and UHF handpiece holder for the Ford Everest RA 2022+, designed and manufactured in Australia by GMF4x4 to be fully compliant with Australian Design Rules and airbag systems for safe, legal, and secure in-vehicle device mounting. Please allow a 2 week lead time on this product. Product Overview The GMF4x4 4003-PH-D is a purpose-built phone and UHF handpiece holder engineered specifically for the Ford Everest RA 2022+. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4003-PH-D is designed specifically for the Ford Everest RA 2022+ and cannot be transferred to another vehicle type. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4003-PH-D fits precisely within the Ford Everest RA 2022+ interior without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps both a phone and a UHF handpiece within easy reach of the driver, optimally positioned for navigation visibility and communications access without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4003-PH-D Brand GMF4x4 Compatible Vehicle Ford Everest RA 2022+ Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Lead Time Approx. 2 weeks Origin Designed and Manufactured in Australia Compatible With Ford Everest RA 2022+ Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4003-PH-D is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4003-PH-D is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4003-PH-D is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Can this bracket be used in other Ford Ranger or Raptor models? No. The 4003-PH-D is designed specifically for the Ford Everest RA 2022+ and cannot be transferred to another vehicle type. Please check our listings for specific holders designed for other Ranger and Raptor variants. Why is there a 2 week lead time on this product? The 4003-PH-D is made to order. Please allow approximately 2 weeks from order placement before dispatch.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4004-PH-S Ford Ranger RA 2022+ Phone Holder A vehicle-specific powder coated black phone holder for the Ford Ranger RA 2022+, designed and manufactured in Australia by GMF4x4 to be fully compliant with Australian Design Rules and airbag systems for safe, legal, and secure in-vehicle phone mounting. Product Overview The GMF4x4 4004-PH-S is a purpose-built phone holder engineered specifically for the Ford Ranger RA 2022+. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4004-PH-S is designed specifically for the Ford Ranger RA 2022+ and cannot be transferred to another vehicle type. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4004-PH-S fits precisely within the Ford Ranger RA 2022+ interior without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps your phone within easy reach of the driver, optimally positioned for navigation visibility without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4004-PH-S Brand GMF4x4 Compatible Vehicle Ford Ranger RA 2022+ Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Ford Ranger RA 2022+ Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4004-PH-S is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4004-PH-S is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4004-PH-S is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Can this bracket be used in other Ford Ranger variants or the Raptor? No. The 4004-PH-S is designed specifically for the Ford Ranger RA 2022+ and cannot be transferred to another vehicle type. Please check our listings for specific holders designed for other Ranger, Raptor, and Everest variants. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4007-PH-D Toyota Hilux N70 2005-2014 Phone and UHF Handpiece Holder A vehicle-specific powder coated black phone and UHF handpiece holder for the Toyota Hilux N70 2005-2014, designed and manufactured in Australia by GMF4x4 to be fully compliant with Australian Design Rules and airbag systems for safe, legal, and secure in-vehicle device mounting. Product Overview The GMF4x4 4007-PH-D is a purpose-built phone and UHF handpiece holder engineered specifically for the Toyota Hilux N70 2005-2014. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4007-PH-D is designed specifically for the Toyota Hilux N70 2005-2014 and cannot be transferred to another vehicle type. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4007-PH-D fits precisely within the Toyota Hilux N70 interior without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps both a phone and a UHF handpiece within easy reach of the driver, optimally positioned for navigation visibility and communications access without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4007-PH-D Brand GMF4x4 Compatible Vehicle Toyota Hilux N70 2005-2014 Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Toyota Hilux N70 2005-2014 Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4007-PH-D is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4007-PH-D is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4007-PH-D is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Can this bracket be used in other Toyota Hilux variants? No. The 4007-PH-D is designed specifically for the Toyota Hilux N70 2005-2014 and cannot be transferred to another vehicle type. Please check our listings for specific holders designed for other Hilux variants or Toyota models. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4009-PH-D Toyota Hilux N80 2015+ Phone and UHF Handpiece Holder A vehicle-specific powder coated black phone and UHF handpiece holder for the Toyota Hilux N80 2015+, designed and manufactured in Australia by GMF4x4 to be fully compliant with Australian Design Rules and airbag systems for safe, legal, and secure in-vehicle device mounting. Please note: Product photos are taken on a Hilux N80 without a UHF handpiece fitted. For an example of the UHF handpiece position, please refer to the additional Ranger photos included in the listing. Product Overview The GMF4x4 4009-PH-D is a purpose-built phone and UHF handpiece holder engineered specifically for the Toyota Hilux N80 2015+. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4009-PH-D is designed specifically for the Toyota Hilux N80 2015+ and cannot be transferred to another vehicle type. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4009-PH-D fits precisely within the Toyota Hilux N80 interior without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps both a phone and a UHF handpiece within easy reach of the driver, optimally positioned for navigation visibility and communications access without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4009-PH-D Brand GMF4x4 Compatible Vehicle Toyota Hilux N80 2015+ Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Toyota Hilux N80 2015+ Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why do the product photos not show a UHF handpiece? The prototype vehicle used during product photography was a Hilux N80 without a UHF handpiece fitted. For a visual example of how the UHF handpiece sits in the holder, please refer to the additional Ranger photos included in the listing images. Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4009-PH-D is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4009-PH-D is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4009-PH-D is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4011-PH-D Isuzu MUX 2021-2024 Phone and UHF Handpiece Holder A vehicle-specific powder coated black phone and UHF handpiece holder for the Isuzu MUX 2021-2024, designed and manufactured in Australia by GMF4x4 to be fully compliant with Australian Design Rules and airbag systems for safe, legal, and secure in-vehicle device mounting. Product Overview The GMF4x4 4011-PH-D is a purpose-built phone and UHF handpiece holder engineered specifically for the Isuzu MUX 2021-2024. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4011-PH-D is designed specifically for the Isuzu MUX 2021-2024 and cannot be transferred to another vehicle type. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4011-PH-D fits precisely within the Isuzu MUX interior without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps both a phone and a UHF handpiece within easy reach of the driver, optimally positioned for navigation visibility and communications access without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4011-PH-D Brand GMF4x4 Compatible Vehicle Isuzu MUX 2021-2024 Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Isuzu MUX 2021-2024 Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4011-PH-D is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4011-PH-D is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4011-PH-D is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Can this bracket be used in other Isuzu models? No. The 4011-PH-D is designed specifically for the Isuzu MUX 2021-2024 and cannot be transferred to another vehicle type. Please check our listings for specific holders designed for other Isuzu models. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4017-PH-D Phone and UHF Handpiece Holder Suits Ford Ranger PX2-PX3, Ford Raptor PX, Ford Everest PX and Mazda BT-50 A vehicle-specific powder coated black phone and UHF handpiece holder designed and manufactured in Australia by GMF4x4, fully compliant with Australian Design Rules and airbag systems. Suits the Ford Ranger PX2-PX3 2015-2021, Ford Raptor PX 2018-2021, Ford Everest PX 2015-2021, and Mazda BT-50 2018-2020. Product Overview The GMF4x4 4017-PH-D is a purpose-built phone and UHF handpiece holder confirmed compatible across the Ford Ranger PX2-PX3 2015-2021, Ford Raptor PX 2018-2021, Ford Everest PX 2015-2021, and Mazda BT-50 2018-2020. These models share a common interior configuration that allows the same bracket to fit across all variants. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4017-PH-D is designed specifically for the listed vehicles and cannot be transferred to other vehicle types. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4017-PH-D fits precisely within compatible vehicle interiors without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps both a phone and a UHF handpiece within easy reach of the driver, optimally positioned for navigation visibility and communications access without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4017-PH-D Brand GMF4x4 Compatible Vehicles Ford Ranger PX2-PX3 2015-2021 / Ford Raptor PX 2018-2021 / Ford Everest PX 2015-2021 / Mazda BT-50 2018-2020 Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Origin Designed and Manufactured in Australia Compatible With Ford Ranger PX2-PX3 2015-2021 Ford Raptor PX 2018-2021 Ford Everest PX 2015-2021 Mazda BT-50 2018-2020 Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Why does one bracket fit all four of these vehicles? The Ford Ranger PX2-PX3, Ford Raptor PX, Ford Everest PX, and Mazda BT-50 2018-2020 share a common interior dash configuration that allows the 4017-PH-D to fit across all variants under a single SKU. Why is a vehicle-specific phone mount safer than a suction cup or universal mount? Vehicle-specific brackets are securely mounted to the vehicle structure and engineered to withstand Australian heat, vibration, and temperature fluctuations that cause suction and adhesive mounts to fail. The 4017-PH-D is also ADR compliant and airbag approved, meaning it has been designed to not interfere with airbag deployment in the event of a collision, something universal window mounts cannot guarantee. Is this holder ADR compliant? Yes. The 4017-PH-D is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4017-PH-D is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Scosche MAGVM2RSD Magnetic Vent Mount for MagSafe Compatible iPhones A powerful magnetic vent mount from Scosche compatible with MagSafe iPhones and magnetic cases, featuring extra powerful rare-earth neodymium magnets, universal vent compatibility, and a built-in kickstand function for desk use. Product Overview The Scosche MAGVM2RSD is a magnetic vent mount designed for MagSafe compatible iPhones and magnetic cases, providing a fast, secure mounting solution across any vent type including horizontal, vertical, angled, and circular vents. Extra powerful rare-earth neodymium magnets deliver a strong, reliable grip while remaining 100% mobile device safe. The open, cradle-free design allows safe one-handed device use and access to all controls and ports without removing the phone from the mount. An integrated cable clip secures the charging cable to the mount for a tidy, tangle-free setup. When away from the vehicle, the MAGVM2RSD doubles as a kickstand on table tops and nightstands for hands-free viewing. Features & Benefits Extra powerful rare-earth neodymium magnets provide a strong, secure grip on MagSafe compatible iPhones and magnetic cases, keeping the device firmly in position across all road conditions without clamps or cradles. The magnets are certified 100% mobile device safe with no impact on device performance or data. Universal vent compatibility means the MAGVM2RSD works with horizontal, vertical, angled, and circular vent types, making it an ideal solution for moving between multiple vehicles, rental cars, or travel applications without needing a vehicle-specific mount. The open, cradle-free design keeps all controls and ports accessible during mounting for one-handed use without removing the phone. The integrated cable clip keeps the charging cable neatly managed and secured to the mount. The built-in kickstand function allows the mount to stand on flat surfaces such as table tops and nightstands for hands-free device use outside the vehicle. Technical Specs Specification Detail Model MAGVM2RSD Brand Scosche Type Magnetic Vent Mount Colour Black Magnet Type Rare-Earth Neodymium Device Safety 100% Mobile Device Safe MagSafe Compatible Yes Compatible Devices MagSafe compatible iPhones and magnetic cases Vent Types Horizontal, Vertical, Angled and Circular Kickstand Function Yes Integrated Cable Clip Yes Warranty 3 Years Goes Well With MagSafe compatible iPhone cases for optimised magnetic grip USB-C and Lightning charging cables for use with the integrated cable clip Frequently Asked Questions Is this mount compatible with Android phones or non-MagSafe iPhones? The MAGVM2RSD is ideal for MagSafe compatible iPhones and magnetic cases. Non-MagSafe devices may work if a compatible magnetic case or magnetic plate is attached, but performance will depend on the strength of the magnetic attachment point on the device or case. Will the magnets damage my phone or affect wireless charging? No. The rare-earth neodymium magnets in the MAGVM2RSD are certified 100% mobile device safe and will not damage your device or interfere with its operation. Does this mount work on all vent types? Yes. The MAGVM2RSD is compatible with horizontal, vertical, angled, and circular vent types, making it suitable for a wide range of vehicles and ideal for travel or rental car use. Can I use the mount as a phone stand on a desk? Yes. The MAGVM2RSD features a built-in kickstand that allows it to stand on flat surfaces such as table tops and nightstands for hands-free device use when away from the vehicle. Is a charging cable included with this mount? No. The MAGVM2RSD includes the vent mount with integrated cable clip only. A charging cable is not included and is available separately.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4025-PH-D Phone and UHF Handpiece Holder Suits Isuzu DMAX, Isuzu MUX and Holden Colorado 2012-2020 A vehicle-specific powder coated black phone and UHF handpiece holder designed and manufactured in Australia by GMF4x4, fully compliant with Australian Design Rules and airbag systems. Suits the Isuzu DMAX 2012-2020, Isuzu MUX 2012-2020, Holden Colorado 2012-2020, and Holden Colorado 7 2012-2020. Please note: This product is currently on pre-order with an approximate 1 week ETA for dispatch. Product Overview The GMF4x4 4025-PH-D is a purpose-built phone and UHF handpiece holder confirmed compatible across the Isuzu DMAX 2012-2020, Isuzu MUX 2012-2020, Holden Colorado 2012-2020, and Holden Colorado 7 2012-2020. These models share a common interior configuration that allows the same bracket to fit across all variants under a single SKU. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4025-PH-D is designed specifically for the listed vehicles and cannot be transferred to other vehicle types. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4025-PH-D fits precisely within compatible vehicle interiors without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps both a phone and a UHF handpiece within easy reach of the driver, optimally positioned for navigation visibility and communications access without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4025-PH-D Brand GMF4x4 Compatible Vehicles Isuzu DMAX 2012-2020 / Isuzu MUX 2012-2020 / Holden Colorado 2012-2020 / Holden Colorado 7 2012-2020 Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Stock Note Pre-order — approx. 1 week ETA for dispatch Origin Designed and Manufactured in Australia Compatible With Isuzu DMAX 2012-2020 Isuzu MUX 2012-2020 Holden Colorado 2012-2020 Holden Colorado 7 2012-2020 Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions Is this product currently in stock? The 4025-PH-D is currently available on pre-order with an approximate 1 week ETA before dispatch. Please contact us if you require a more precise lead time estimate. Why does one bracket fit all four of these vehicles? The Isuzu DMAX, Isuzu MUX, Holden Colorado, and Holden Colorado 7 from 2012-2020 share a common interior dash configuration that allows the 4025-PH-D to fit across all variants under a single SKU. Is this holder ADR compliant? Yes. The 4025-PH-D is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4025-PH-D is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

GMF4x4 4026-PH-S Phone Holder Suits Isuzu DMAX, Isuzu MUX and Holden Colorado 2012-2020 A vehicle-specific powder coated black phone holder designed and manufactured in Australia by GMF4x4, fully compliant with Australian Design Rules and airbag systems. Suits the Isuzu DMAX 2012-2020, Isuzu MUX 2012-2020, Holden Colorado 2012-2020, and Holden Colorado 7 2012-2020. Please note: This product has an approximate 1.5 week ETA for dispatch. Product Overview The GMF4x4 4026-PH-S is a purpose-built phone holder confirmed compatible across the Isuzu DMAX 2012-2020, Isuzu MUX 2012-2020, Holden Colorado 2012-2020, and Holden Colorado 7 2012-2020. These models share a common interior configuration that allows the same bracket to fit across all variants under a single SKU. Designed and manufactured in Australia, the bracket is fully compliant with Australian Design Rules (ADR) and airbag systems, providing peace of mind that your device mount meets Australian legal requirements and does not hinder the airbag system in the event of a collision. The bracket is powder coated black and designed for easy installation. Phone mounts are not included — GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads with this bracket. The 4026-PH-S is designed specifically for the listed vehicles and cannot be transferred to other vehicle types. GMF4x4 have many designs, patents, and trademarks registered in Australia and internationally. Features & Benefits Vehicle-specific design ensures the 4026-PH-S fits precisely within compatible vehicle interiors without interfering with vehicle controls, airbag zones, or occupant protection structures. Unlike universal window suction mounts, this bracket is securely mounted to the vehicle and engineered to withstand Australian heat, vibration, and the harsh conditions that cause suction and adhesive mounts to fail. Full ADR compliance and airbag system approval means the bracket meets Australian legal requirements for aftermarket accessories fitted to vehicles on Australian roads. GMF4x4's expertise in ADR compliance stems from over a decade of manufacturing ADR-compliant front and rear bars with full airbag approval and load testing. The hard-wearing powder coat black finish provides long-term chip and corrosion resistance. The holder keeps your phone within easy reach of the driver, optimally positioned for navigation visibility without distraction. Phone mounts are not included. GMF4x4 recommends Quadlock Wireless Charging Heads or MAG Heads for use with this bracket. Technical Specs Specification Detail SKU 4026-PH-S Brand GMF4x4 Compatible Vehicles Isuzu DMAX 2012-2020 / Isuzu MUX 2012-2020 / Holden Colorado 2012-2020 / Holden Colorado 7 2012-2020 Finish Powder Coated Black Phone Mount Included No (Quadlock Wireless or MAG Head recommended) ADR Compliant Yes Airbag System Approved Yes Vehicle Transferable No (vehicle-specific design) Stock Note Approx. 1.5 week ETA for dispatch Origin Designed and Manufactured in Australia Compatible With Isuzu DMAX 2012-2020 Isuzu MUX 2012-2020 Holden Colorado 2012-2020 Holden Colorado 7 2012-2020 Quadlock Wireless Charging Heads (recommended, sold separately) Quadlock MAG Heads (recommended, sold separately) Frequently Asked Questions What is the current lead time for this product? The 4026-PH-S has an approximate 1.5 week ETA for dispatch. Please contact us if you require a more precise timeline. What is the difference between the 4026-PH-S and the 4025-PH-D for these vehicles? The 4026-PH-S is a phone-only holder. The 4025-PH-D includes both a phone position and a UHF handpiece position. If you also need to mount a UHF handpiece alongside your phone, the 4025-PH-D is the recommended option for these vehicles. Is this holder ADR compliant? Yes. The 4026-PH-S is fully compliant with Australian Design Rules and airbag system requirements. GMF4x4 has over a decade of experience in ADR compliance through the manufacture of ADR-compliant front and rear bars, and applies the same engineering standards to their phone holders. Are phone mounts included with this bracket? No. The 4026-PH-S is the vehicle-specific mounting bracket only. Phone mounts are not included. GMF4x4 recommends using Quadlock Wireless Charging Heads or MAG Heads, which are available separately. Is this product made in Australia? Yes. GMF4x4 products are proudly designed and manufactured in Australia. GMF4x4 also hold designs, patents, and trademarks registered in Australia and internationally.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA RV103-AI Heavy Duty Compact AHD AI Camera - Commercial-Grade Reversing Camera with Pedestrian Detection Enhance vehicle safety with the DNA RV103-AI heavy duty compact AHD AI camera, featuring advanced artificial intelligence pedestrian detection technology that identifies stationary and moving people up to 10 metres away with audible alerts and dynamic colour-changing on-screen warnings, delivering exceptional 1080P Analogue High Definition image clarity through CMOS sensor with 105° horizontal viewing angle, rugged IP69K waterproof aluminum alloy construction, and adjustable PAL/NTSC system compatibility for commercial-grade vehicle surveillance and reversing applications. Product Overview The DNA RV103-AI represents cutting-edge commercial-grade camera technology that combines Analogue High Definition imaging with sophisticated artificial intelligence pedestrian detection capabilities for enhanced vehicle safety and situational awareness. This rugged camera utilises advanced CMOS image sensor technology delivering crisp 1080P high-resolution visuals through AHD (Analogue High Definition) transmission, providing significantly improved visibility compared to traditional CVBS cameras while maintaining simple analogue installation procedures. The revolutionary AI pedestrian detection system actively monitors the vehicle's surroundings, identifying both stationary and moving people within a 10-metre detection range through sophisticated computer vision algorithms. When pedestrians enter the vehicle's driving or reversing path, the system immediately triggers audible alerts on compatible monitors while displaying dynamic on-screen visual warnings that intelligently change colour as detected persons move closer to the vehicle, providing drivers with clear, immediate, and graduated feedback about pedestrian proximity for enhanced reaction time and accident prevention. The camera features 0.1 LUX low-light sensitivity combined with F1.2 aperture, enabling excellent visibility during dawn, dusk, and nighttime operations when pedestrian detection becomes most critical for commercial vehicle safety. The 105° horizontal viewing angle provides comprehensive rear or side coverage that minimizes blind spots while the 600TV line horizontal resolution ensures sharp detail capture for license plate reading and obstacle identification. Robust IP69K waterproof rating protects against high-pressure water jets, dust ingress, and harsh environmental conditions, making this camera ideal for commercial vehicles, construction equipment, agricultural machinery, and heavy-duty applications exposed to extreme weather and wash-down procedures. The aluminum alloy shell construction provides superior durability against impacts, vibrations, and temperature extremes compared to plastic housings, ensuring long-term reliability in demanding commercial environments. Built-in sun visor reduces glare and lens flare in bright sunlight conditions, maintaining image clarity throughout varied lighting scenarios. The camera supports multiple video formats including 1080P, 720P, and CVBS with PAL/NTSC system adjustability through included control box, providing flexible compatibility with existing monitor installations across international markets. The supplied 0.6m cable with 4-pin water-resistant lockable connector ensures secure connections that resist vibration loosening and moisture ingress. Compact dimensions of just 55mm × 40mm × 49mm (camera only) enable discreet installation in tight mounting locations while the included bracket expands dimensions to 68mm × 57mm × 49mm for secure positioning. The intuitive controller interface allows on-site configuration of video settings, guideline overlays, and system parameters through simple press-key menu navigation with save functionality. Features & Benefits Advanced AI Pedestrian Detection Technology Revolutionary artificial intelligence system actively identifies both stationary and moving pedestrians up to 10 metres away, triggering audible alerts and dynamic colour-changing on-screen warnings that intensify as people approach closer, providing drivers with graduated proximity feedback that enables proactive accident prevention and enhanced situational awareness in commercial vehicle operations. 1080P AHD High-Definition Imaging Delivers exceptional 1080P Analogue High Definition resolution through advanced CMOS sensor technology, providing significantly improved image clarity, detail capture, and visibility compared to traditional CVBS cameras while maintaining simple analogue installation procedures without requiring complex IP networking infrastructure, ensuring professional-grade surveillance quality for commercial applications. Extreme IP69K Waterproof Protection Features robust IP69K waterproof rating that protects against high-pressure water jets, steam cleaning, dust ingress, and harsh environmental conditions, combined with durable aluminum alloy shell construction that withstands impacts, vibrations, and temperature extremes, ensuring reliable long-term operation in demanding commercial, construction, agricultural, and heavy-duty vehicle applications. Superior Low-Light Performance Equipped with 0.1 LUX low-light sensitivity and F1.2 large aperture that enables excellent visibility during dawn, dusk, and nighttime operations when pedestrian detection becomes most critical for safety, maintaining clear image quality and reliable AI detection capabilities throughout varied lighting conditions for 24-hour commercial vehicle operation. Comprehensive 105° Wide-Angle Coverage Provides extensive 105° horizontal viewing angle that minimizes blind spots and delivers comprehensive rear or side area coverage, combined with built-in sun visor that reduces glare and lens flare in bright sunlight, ensuring consistent image clarity and optimal visibility across diverse lighting scenarios for enhanced driver confidence and safety. Flexible System Compatibility and Configuration Supports multiple video formats including 1080P, 720P, and CVBS with adjustable PAL/NTSC system compatibility through included control box, enabling flexible integration with existing monitor installations across international markets, while intuitive controller interface allows on-site configuration of video settings, guideline overlays, and system parameters for customized installation requirements. Technical Specifications Specification Details Brand DNA Model RV103-AI Product Type Heavy Duty AHD AI Camera Image Sensor CMOS Video Output Default AHD 1080P/PAL System Resolution 1080P (Adjustable: 1080P/720P/CVBS) Video System NTSC/PAL Adjustable via Control Box AI Detection Built-in Pedestrian Detection Detection Range Up to 10 Metres Low-Light Sensitivity 0.1 LUX Aperture F1.2 Viewing Angle 105° Horizontal Horizontal Resolution 600TV Line Operating Voltage 12V DC Sun Visor Built Into Casing Shell Material Aluminum Alloy Waterproof Rating IP69K Video Output Signal 1Vp-p 75 Ohm Composite Cable Length 0.6m with 4-Pin Water-Resistant Lockable Connector Camera Dimensions 55mm (W) × 40mm (H) × 49mm (D) Camera & Bracket Dimensions 68mm (W) × 57mm (H) × 49mm (D) Controller Press Key Menu Navigation with Save Function Guideline Settings Press and Hold 3 Seconds to Save/Exit Packaging Box Compatible With Compatible Monitors: AHD-compatible monitors supporting 1080P resolution DNA AHD monitor systems with AI alert support Commercial vehicle monitor systems with audio alert capability Multi-camera AHD DVR recording systems Vehicle Applications: Commercial trucks and delivery vehicles Construction equipment and heavy machinery Agricultural tractors and farming equipment Buses and passenger transport vehicles Caravans and recreational vehicles Fleet vehicles requiring enhanced safety systems Installation Components: DNA AHD extension cables for custom installation lengths 4-pin waterproof extension cables for longer runs Multiple camera switching systems for multi-view setups Professional-grade AHD video distribution amplifiers Power Requirements: 12V DC vehicle electrical systems Commercial vehicle battery systems Isolated power supplies for standalone applications Note: Optimal AI pedestrian detection and alert functionality requires compatible monitor system with audio alert capability and dynamic warning display support. Frequently Asked Questions How does the AI pedestrian detection system work? The advanced AI system uses computer vision algorithms to continuously analyze the camera's video feed, identifying both stationary and moving pedestrians within a 10-metre detection range. When a person is detected in the vehicle's path, the system triggers an audible alert on the compatible monitor and displays a dynamic on-screen visual warning that changes colour as the person moves closer, providing graduated proximity feedback for enhanced driver awareness. What is the difference between AHD and traditional CVBS cameras? AHD (Analogue High Definition) provides significantly higher image resolution (1080P) compared to traditional CVBS cameras, delivering sharper detail, better clarity, and improved ability to identify objects and people. However, AHD maintains the simple analogue installation process without requiring complex IP networking, making it ideal for commercial vehicle upgrades requiring professional image quality with straightforward installation. Can this camera withstand high-pressure washing and harsh weather? Yes, the IP69K waterproof rating provides the highest level of protection against high-pressure water jets, steam cleaning, dust ingress, and extreme weather conditions. The aluminum alloy shell construction offers superior durability against impacts and temperature extremes, making this camera specifically designed for demanding commercial applications including construction sites, agricultural environments, and vehicles requiring regular pressure washing. Is this camera compatible with existing reverse camera monitors? The camera is compatible with AHD-capable monitors that support 1080P resolution. For traditional CVBS monitors, the camera can be configured to output in CVBS mode through the control box, though this will reduce resolution and disable some advanced features. For optimal AI pedestrian detection functionality including colour-changing warnings and audio alerts, a compatible DNA AHD monitor system is recommended. How do I configure the camera settings and guidelines? The included controller provides intuitive menu navigation using press keys and direction controls. Access the menu by pressing the key, navigate through settings using direction keys, then press save to store configuration. For guideline settings specifically, press and hold the key for 3 seconds to save and exit. The control box also allows adjustment of video format (1080P/720P/CVBS) and system type (PAL/NTSC) for compatibility with different monitor systems.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

DNA RVM72 7-Inch AHD 2 Channel Rear View TFT-LCD Monitor Professional-grade 7 inch AHD rear view mirror monitor featuring two independent camera inputs with triggered activation enabling comprehensive dual-camera vehicle safety and visibility systems for cars, SUVs, trucks, and commercial vehicle applications. The DNA RVM72 mirror-style monitor combines non-reflective TFT-LCD display technology with OEM-inspired mirror housing delivering clear, stable video monitoring across two independent camera channels with split display view configuration. This versatile monitoring solution supports both CCD and AHD camera technologies with automatic PAL/NTSC video system detection, touch button controls, IR remote operation, and flexible installation options through clip-on mirror mount or bracket mounting systems. Operating across 12-24V electrical systems with water-resistant lockable camera connections, this professional monitoring solution delivers reliable dual-camera visibility for enhanced parking safety, front and rear monitoring, and comprehensive vehicle visibility across diverse passenger and commercial vehicle applications. Product Overview Upgrade your driving visibility with this 7-inch AHD TFT-LCD rear view monitor, designed in a mirror-style housing with non-reflective display for a sleek, factory-fit look. Ideal for cars, SUVs, trucks, and commercial vehicles, this monitor delivers a wide 16:9 image and flexible viewing options for safer driving and parking. Dual-Camera System Architecture: The monitor supports split display view, allowing you to customize how your camera feeds are shown. With dual video inputs and trigger support, it's perfect for rear and front cameras or additional safety systems enabling simultaneous monitoring of multiple vehicle perspectives. Flexible Installation Options: Installation is simple and versatile thanks to two mounting options: a clip-on style that fits over most existing rear-view mirrors, or a bracket mount for dashboard or custom installations. Supporting automatic PAL and NTSC video systems and compatible with 12-24V electrical systems, this monitor is compatible with a broad range of vehicles. Features & Benefits Comprehensive Dual-Camera Monitoring System Professional two-channel video monitoring system enables simultaneous connection of rear and front cameras or rear camera with auxiliary side-view camera providing enhanced vehicle visibility. The two independent trigger inputs allow automatic camera activation based on vehicle operation including reverse gear engagement or manual camera selection through touch controls or IR remote ensuring relevant camera views display automatically during critical maneuvering operations. Split Display View Configuration Advanced display processing supports split display view configuration enabling simultaneous viewing of both camera feeds or single camera full-screen display. This display flexibility enables operators to monitor multiple vehicle perspectives simultaneously during complex maneuvering operations or parking maneuvers ensuring comprehensive visibility during critical driving situations. AHD High-Definition Camera Support Advanced AHD (Analog High Definition) technology support enables connection of high-resolution AHD cameras delivering superior image quality compared to traditional analog camera systems. Backward compatibility with standard CCD analog cameras ensures flexibility during system upgrades or mixed camera installations while automatic PAL/NTSC video system detection eliminates configuration requirements across international vehicle applications. OEM-Style Mirror Housing with Non-Reflective Display Professional mirror-style housing design integrates seamlessly with factory vehicle interiors providing clean OEM-inspired appearance. The non-reflective 7-inch TFT-LCD display eliminates glare and reflection issues common with traditional mirror monitors ensuring clear video visibility under all lighting conditions while maintaining traditional rear-view mirror functionality when the display is inactive. Versatile Mounting and Installation Options Dual mounting system provides installation flexibility through clip-on mirror bracket compatible with most Toyota, Mitsubishi, Nissan, and Holden factory rear-view mirrors, or bracket mount option for dashboard, overhead, or custom mounting locations. Water-resistant lockable 4-pin camera connections ensure secure weatherproof cable connections while 12-24V wide operating voltage range supports installation across passenger vehicles, commercial trucks, and light commercial vehicles. Professional Control Interface with Auto-Dimming Touch button control panel and included IR remote control provide convenient operation of camera selection, display configuration, and system settings without dashboard modification. Integrated auto-dimming function automatically adjusts display brightness based on ambient lighting conditions reducing eye strain during night driving while maintaining optimal video visibility during daytime operations. Technical Specifications Specification Details Product Code RVM72 SKU RVM72 Brand DNA Display Type 7-inch AHD TFT-LCD Screen Size 7 inches diagonal Aspect Ratio 16:9 widescreen Resolution 1024 (RGB) x 600 pixels Video System Auto PAL & NTSC detection Camera Inputs 2 independent video inputs Trigger Inputs 2 independent trigger wires (one per camera) Display Views Split display view and single camera full-screen Camera Compatibility CCD analog cameras and AHD high-definition cameras Camera Connections 4-pin water-resistant lockable connectors Control Interface Touch button controls and IR remote control Operating Voltage 12-24V DC wide voltage range Auto-Dimming Automatic brightness adjustment based on ambient light Mounting Options Clip-on mirror bracket or bracket mount Mirror Bracket Compatibility Most Toyota, Mitsubishi, Nissan, and Holden vehicles Dimensions 220mm W x 106mm H x 25.6mm D Packaging Display box Country of Origin Designed for Australian market compliance Compatible With Vehicle Applications: Passenger Cars and Sedans SUVs and Crossovers Light Trucks and Utes Light Commercial Vehicles Delivery Vans 4WD Vehicles Caravans and Motorhomes Any vehicle requiring front and rear camera monitoring Camera System Compatibility: AHD High-Definition Backup Cameras CCD Analog Backup Cameras Front-View Parking Cameras Rear-View Reversing Cameras Any 4-pin video camera with PAL or NTSC output Ideal Applications: Rear reversing and parking assistance Front bumper parking assistance Dual-perspective vehicle monitoring Caravan and trailer coupling Enhanced visibility for larger vehicles Commercial fleet safety compliance Frequently Asked Questions Q: How many cameras can be connected to this monitor? The DNA RVM72 supports two independent camera inputs with two separate trigger wires enabling simultaneous connection of front and rear cameras or rear camera with auxiliary side-view camera. Each camera input features independent trigger activation allowing automatic camera display switching based on vehicle operation such as reverse gear engagement. The monitor supports split display view for simultaneous monitoring or single camera full-screen display for focused viewing. Q: Will this monitor work with both AHD high-definition cameras and standard analog cameras? Yes, the DNA RVM72 supports both AHD (Analog High Definition) cameras and traditional CCD analog cameras providing installation flexibility. AHD camera support enables high-resolution video monitoring with superior image quality compared to standard analog systems, while backward compatibility with CCD cameras ensures compatibility with existing camera installations. The monitor automatically detects PAL or NTSC video systems eliminating manual configuration requirements. Q: What mounting options are available and how does the clip-on mirror mount work? The DNA RVM72 includes two mounting options: a clip-on mirror-style bracket that attaches over most factory rear-view mirrors (compatible with most Toyota, Mitsubishi, Nissan, and Holden vehicles), or a bracket mount suitable for dashboard, overhead, or custom mounting locations. The clip-on mirror bracket provides quick installation without removing the factory mirror, while the bracket mount option offers flexible positioning for various vehicle applications. Q: Can this monitor operate in both 12V and 24V vehicle electrical systems? Yes, the DNA RVM72 features a wide 12-24V DC operating voltage range making it compatible with both passenger vehicle 12V electrical systems and light commercial vehicle 24V electrical systems. This wide voltage compatibility ensures installation flexibility across diverse vehicle applications from passenger cars and SUVs to light commercial vehicles and delivery vans without requiring voltage converters. Q: How are the cameras activated and can I manually switch between camera views? Cameras can be activated automatically through two independent trigger wires connected to vehicle circuits (such as reverse gear or ignition accessories) enabling automatic camera switching based on vehicle operation. Additionally, manual camera selection and display configuration is available through touch button controls on the monitor housing or via the included IR remote control allowing operators to manually select specific camera views or split-screen display as needed during operation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less