Aerpro SWSU14C Steering Wheel Control Interface Subaru Various Models Camera Retention An analogue steering wheel control interface engineered for various Subaru vehicles, the SWSU14C retains factory steering wheel controls and the OEM reverse camera, provides reverse trigger and park brake outputs, and retains the OEM AV socket, with a vehicle-specific plug connection requiring no cutting of the factory wiring harness. Product Overview The Aerpro SWSU14C is an analogue steering wheel control interface designed for various Subaru vehicles. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWSU14C is compatible with SW-type patch leads (sold separately), supports the OEM phone button and Voice Assistant button when connected to a compatible aftermarket head unit, retains the OEM reverse camera when equipped, and retains the OEM AV socket. OEM reverse camera retention applies only if the vehicle was originally fitted with a factory reverse camera, and the aftermarket head unit must have an RCA camera input for the camera to display. The 5-pin camera plug should be disregarded if not present in the vehicle, as the camera signal is also wired through the main plug. Outputs include reverse trigger (purple wire) and park brake (green wire). Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWSU14C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWSU14C interface. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWSU14C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. OEM Reverse Camera Retention: The SWSU14C retains the factory reverse camera when connected to a compatible aftermarket head unit with an RCA camera input. Camera retention applies only if the vehicle was originally fitted with a factory reverse camera. The camera signal is wired through the main plug; the 5-pin camera plug should be disregarded if not present in the vehicle. OEM AV Socket Retention: The SWSU14C retains the OEM AV socket functionality when connected to a compatible aftermarket head unit. Vehicle-Specific Plug - No Wire Cutting Required: The SWSU14C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. Analogue Interface Type: The SWSU14C uses an analogue interface type, compatible with the steering wheel control signal architecture used in the supported Subaru vehicles. OEM Phone Button and Voice Assistant Support: The SWSU14C supports the OEM phone button and Voice Assistant button when connected to a compatible aftermarket head unit. Reverse Trigger Output (Purple): A reverse trigger output via a purple wire enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Park Brake Output (Green): A park brake output is provided via a green wire, supplying the park brake signal required by compatible aftermarket head units for safety feature operation. Custom Button Remapping Available: The SWSU14C supports optional custom button remapping to customise the steering wheel control button configuration. Remapping requires a USB-C cable (sold separately). Compatible with Aerpro APP8 Secondary ISO Harness: The SWSU14C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWSU14C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWSU14C Brand Aerpro Compatible Vehicles Subaru Various Models Interface Type Analogue Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support Yes OEM Reverse Camera Retention Yes (aftermarket head unit requires RCA camera input) OEM AV Socket Retention Yes OEM Amplified System No Reverse Trigger Output Yes (Purple) Park Brake Output Yes (Green) Speed Pulse Output No Illumination Output No Amp Remote Output No Telephone Mute Output No 5-Pin Camera Plug Note Disregard if not present; camera signal also wired through main plug Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWSU14C is engineered for various Subaru vehicles. OEM reverse camera retention applies only if the vehicle was originally fitted with a factory reverse camera, and the aftermarket head unit must have an RCA camera input. The 5-pin camera plug should be disregarded if not present in the vehicle, as the camera signal is also wired through the main plug. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWSU14C require cutting of the factory wiring harness? No. The SWSU14C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWSU14C retain the factory Subaru reverse camera? Yes, if the vehicle was originally fitted with a factory reverse camera. The aftermarket head unit must have an RCA camera input for the camera to display. The reverse trigger output (purple wire) automatically switches the head unit to the camera input when reverse gear is selected. If the 5-pin camera plug is not present in the vehicle, it should be disregarded as the camera signal is also wired through the main plug. Is a SWC patch lead included with the SWSU14C? No. A steering wheel control patch lead is required to use the SWSU14C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. Does the SWSU14C support Voice Assistant functions? Yes. The SWSU14C supports the Voice Assistant button when connected to a compatible aftermarket head unit. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. What is the OEM AV socket retention feature on the SWSU14C? The SWSU14C retains the OEM AV socket functionality in the vehicle when connected to a compatible aftermarket head unit, allowing the factory AV socket to continue operating after the head unit upgrade.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWTO20C Steering Wheel Control Interface Toyota Various Models OEM Amplifier and 360 Camera Retention A CANBUS steering wheel control interface engineered for various Toyota vehicles with OEM amplified systems and 360-degree cameras, the SWTO20C retains factory steering wheel controls, OEM amplifier, OEM 360-degree reverse camera, OEM USB input, and OEM AUX input, and provides reverse trigger, park brake, and speed pulse outputs with no wire cutting required. Product Overview The Aerpro SWTO20C is a CANBUS steering wheel control interface designed for various Toyota vehicles fitted with OEM amplified systems and 360-degree cameras. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. No additional modules are required for CANBUS vehicles. The SWTO20C is compatible with SW-type patch leads (sold separately), supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit, and retains the OEM amplifier, OEM 360-degree reverse camera, OEM USB input, and OEM AUX input when connected to a compatible aftermarket head unit. OEM AUX and USB retention requires the aftermarket head unit to have rear USB and AUX inputs. OEM 360-degree camera retention applies only if the vehicle was originally fitted with a factory 360-degree camera, and the aftermarket head unit must have an RCA camera input. For amplified vehicles, fade is not supported. Outputs include reverse trigger (purple/white), park brake (green), and speed pulse (pink). Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWTO20C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWTO20C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. CANBUS Interface - No Additional Modules Required: The SWTO20C uses CANBUS integration for direct communication with the vehicle's CANBUS network, eliminating the need for additional interface modules in compatible Toyota vehicles. OEM Amplifier Retention: The SWTO20C retains the OEM amplified system in the vehicle when connected to a compatible aftermarket head unit. Fade is not supported for amplified vehicles. OEM 360-Degree Reverse Camera Retention: The SWTO20C retains the factory 360-degree reverse camera when connected to a compatible aftermarket head unit with an RCA camera input. Retention applies only if the vehicle was originally fitted with a factory 360-degree camera system. OEM USB Input Retention: The SWTO20C retains the OEM USB input when connected to a compatible aftermarket head unit with a rear USB input, preserving the factory USB connectivity after the head unit upgrade. OEM AUX Input Retention: The SWTO20C retains the OEM AUX input when connected to a compatible aftermarket head unit with a rear AUX input, preserving the factory AUX connectivity after the head unit upgrade. Vehicle-Specific Plug - No Wire Cutting Required: The SWTO20C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM Phone Button Support: The SWTO20C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Reverse Trigger Output (Purple/White): A reverse trigger output via a purple/white wire enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Park Brake Output (Green): A park brake output is provided via a green wire, supplying the park brake signal required by compatible aftermarket head units for safety feature operation. Speed Pulse Output (Pink): A speed pulse output is provided via a pink wire for aftermarket head units that require a vehicle speed signal for navigation or speed-dependent volume functions. Compatible with Aerpro APP8 Secondary ISO Harness: The SWTO20C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWTO20C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWTO20C Brand Aerpro Compatible Vehicles Toyota Various Models with OEM Amplified Systems and 360-Degree Cameras Interface Type CANBUS Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support No OEM Amplified System Retention Yes (fade not supported) OEM 360-Degree Camera Retention Yes (aftermarket head unit requires RCA camera input) OEM USB Input Retention Yes (aftermarket head unit requires rear USB input) OEM AUX Input Retention Yes (aftermarket head unit requires rear AUX input) Reverse Trigger Output Yes (Purple/White) Park Brake Output Yes (Green) Speed Pulse Output Yes (Pink) Illumination Output No Amp Remote Output No Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWTO20C is engineered for various Toyota vehicles fitted with OEM amplified systems and 360-degree cameras. OEM camera retention applies only if the vehicle was originally fitted with a factory 360-degree camera, and the aftermarket head unit must have an RCA camera input. OEM USB and AUX retention requires the aftermarket head unit to have rear USB and AUX inputs. Fade is not supported for amplified vehicles. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWTO20C require cutting of the factory wiring harness? No. The SWTO20C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWTO20C retain the factory Toyota 360-degree camera? Yes, if the vehicle was originally fitted with a factory 360-degree camera system. The aftermarket head unit must have an RCA camera input for the camera to display. The reverse trigger output (purple/white wire) automatically switches the head unit to the camera input when reverse gear is selected. Does the SWTO20C retain the OEM amplified system? Yes. The SWTO20C retains the OEM amplified system when connected to a compatible aftermarket head unit. Fade is not supported for amplified vehicles. Confirm that the absence of fade support is acceptable for your specific vehicle's audio setup before installation. Does the SWTO20C retain the OEM USB and AUX inputs? Yes. The SWTO20C retains both the OEM USB input and OEM AUX input when connected to a compatible aftermarket head unit that has rear USB and AUX inputs. Is a SWC patch lead included with the SWTO20C? No. A steering wheel control patch lead is required to use the SWTO20C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro FP8349 Double DIN Fascia Kit Mitsubishi Gloss Black A vehicle-specific Double DIN fascia kit for Mitsubishi vehicles, the FP8349 is manufactured from high-grade ABS plastic with a gloss black finish and includes metal mounting brackets and screws for a professional, factory-matched installation. Product Overview The Aerpro FP8349 is a Double DIN fascia kit designed for Mitsubishi vehicles. Manufactured from high-grade ABS plastic with a gloss black finish, the FP8349 is designed to match the vehicle's dashboard profile and provide a professional-looking finish around the aftermarket head unit installation. The internal aperture measures 171mm wide by 97mm high, accommodating standard Double DIN head unit dimensions. Metal mounting brackets and eight screws are included. Features & Benefits High-Grade ABS Plastic Construction: The FP8349 is manufactured from high-grade ABS plastic, providing long-term durability and dimensional stability suited to the in-vehicle thermal environment. Gloss Black Finish Designed to Match Vehicle Dashboard: The gloss black finish is designed to complement the Mitsubishi vehicle dashboard, providing a cohesive, factory-consistent appearance around the aftermarket head unit after installation. Double DIN Aperture: The FP8349 provides a Double DIN aperture with internal dimensions of 171mm wide by 97mm high, accommodating standard Double DIN aftermarket head units. Metal Mounting Brackets and Screws Included: The FP8349 is supplied with metal mounting brackets and eight screws, providing all the hardware required to secure the fascia and head unit within the vehicle dashboard opening. Technical Specs Specification Detail SKU FP8349 Brand Aerpro Compatible Vehicles Mitsubishi Application Double DIN Colour Gloss Black Material High-Grade ABS Plastic Internal Dimensions 171mm W x 97mm H Inclusions Metal Brackets and 8 Screws Compatible With The FP8349 is designed for Mitsubishi vehicles with a Double DIN head unit installation. Confirm compatibility with your specific Mitsubishi model and build date before purchase. The internal aperture of 171mm wide by 97mm high is suited to standard Double DIN aftermarket head units. Frequently Asked Questions Does the FP8349 include mounting hardware? Yes. The FP8349 is supplied with metal mounting brackets and eight screws, providing all the hardware required to secure the fascia and head unit within the vehicle dashboard opening. Is the FP8349 compatible with Single DIN head units? No. The FP8349 provides a Double DIN aperture and is designed for standard Double DIN aftermarket head units only. What are the internal dimensions of the FP8349 aperture? The FP8349 has an internal aperture measuring 171mm wide by 97mm high, which is suited to standard Double DIN head unit face dimensions. Does the FP8349 include wiring harnesses or steering wheel control adaptors? No. The FP8349 is a fascia kit only and does not include wiring harnesses, steering wheel control interfaces, or antenna adaptors. These components need to be sourced separately for a complete installation. What material is the FP8349 made from? The FP8349 is manufactured from high-grade ABS plastic with a gloss black finish, designed to match the dashboard appearance of compatible Mitsubishi vehicles and provide long-term durability.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro FP7504K Double DIN Head Unit Install Kit Mazda 3 BK 2004-2009 A complete vehicle-specific Double DIN head unit installation kit for the Mazda 3 BK (2004-2009), the FP7504K includes a black fascia kit, plastic brackets, screws, steering wheel control interface, and universal patch lead, with CANBUS compatibility and park brake, speed pulse, reverse, and illumination outputs. Product Overview The Aerpro FP7504K is a complete Double DIN head unit installation kit designed specifically for the Mazda 3 BK from 2004-2009. It includes all the components required to complete a full aftermarket Double DIN head unit installation in one box: a black fascia kit, plastic brackets, screws, a steering wheel control interface, and a universal patch lead. The SWC interface is CANBUS compatible and requires no additional modules for CANBUS vehicles. The internal aperture measures 174mm wide by 98mm high, accommodating standard Double DIN head unit face dimensions. Outputs from the SWC interface include park brake, speed pulse, reverse gear, and illumination. To further simplify the installation, the FP7504K is compatible with the Aerpro APP8 aftermarket head unit harness adaptor (sold separately), which connects from the aftermarket head unit directly into the steering wheel control interface harness supplied in this kit. The FP7504K is not compatible with BOSE amplified systems. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Features & Benefits Complete Double DIN Installation Kit for Mazda 3 BK 2004-2009: The FP7504K includes all the parts required to complete an aftermarket Double DIN head unit installation in the Mazda 3 BK from 2004-2009 in a single purchase, eliminating the need to source components individually. Black Fascia Kit for Mazda 3 BK Dashboard Integration: The included black fascia kit is designed specifically for the Mazda 3 BK (2004-2009) dashboard profile, providing a high-quality black finish that complements the interior styling of this Mazda 3 generation. Steering Wheel Control Interface Included: The FP7504K includes a vehicle-specific steering wheel control interface, retaining the factory steering wheel audio controls with the aftermarket head unit after installation and calibration. CANBUS Integration - No Additional Modules Required: The SWC interface is CANBUS compatible, providing direct integration with the Mazda 3 BK's CANBUS network without requiring additional interface modules. Park Brake, Speed Pulse, Reverse, and Illumination Outputs: The SWC interface provides park brake, speed pulse, reverse gear, and illumination output feeds for compatible aftermarket head units that utilise these signals for safety, navigation, and display functions. Universal Patch Lead Included: A universal patch lead is included to connect the SWC interface to the aftermarket head unit's SWC input. Compatible with Aerpro APP8 Head Unit Harness Adaptor: The FP7504K is compatible with the Aerpro APP8 aftermarket head unit harness adaptor (sold separately), which connects directly from the aftermarket head unit to the SWC interface harness supplied in the kit, simplifying the overall installation wiring. Not Compatible with BOSE Amplified Systems: The FP7504K is not compatible with Mazda 3 BK vehicles fitted with BOSE amplified sound systems. Confirm whether your specific vehicle has a BOSE amplified system before purchase. Technical Specs Specification Detail SKU FP7504K Brand Aerpro Compatible Vehicles Mazda 3 BK, 2004-2009 Application Double DIN Colour Black Material ABS Plastic Internal Dimensions 174mm W x 98mm H SWC Interface Included SWC Interface Type CANBUS Park Brake Output Yes Speed Pulse Output Yes Reverse Output Yes Illumination Output Yes Universal Patch Lead Included Plastic Brackets Included Screws Included BOSE Amplified Systems Not compatible Recommended Accessory Aerpro APP8 Head Unit Harness Adaptor (sold separately) What's in the Box Black Fascia Kit Plastic Brackets Screws Steering Wheel Control Interface Universal Patch Lead Compatible With The FP7504K is designed for the Mazda 3 BK from 2004-2009 with a Double DIN head unit installation. It is not compatible with Mazda 3 BK vehicles fitted with BOSE amplified sound systems. The internal aperture of 174mm wide by 98mm high suits standard Double DIN aftermarket head units. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Compatible with the Aerpro APP8 head unit harness adaptor (sold separately) for a simplified wiring installation. Frequently Asked Questions Does the FP7504K include everything needed for a complete head unit installation? Yes. The FP7504K includes the fascia kit, plastic brackets, screws, steering wheel control interface, and universal patch lead required for a complete Double DIN head unit installation in the Mazda 3 BK (2004-2009). To simplify the wiring connection between the aftermarket head unit and the SWC interface, the Aerpro APP8 head unit harness adaptor is available separately. Is the FP7504K compatible with Mazda 3 BK vehicles with BOSE audio? No. The FP7504K is not compatible with Mazda 3 BK vehicles fitted with BOSE amplified sound systems. Confirm whether your specific vehicle has BOSE audio before purchase. Does the FP7504K retain the factory Mazda 3 steering wheel controls? Yes. The included SWC interface retains the factory steering wheel audio controls with a compatible aftermarket head unit after installation and calibration. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. What is the Aerpro APP8 and is it required? The Aerpro APP8 is an aftermarket head unit harness adaptor that connects directly from the aftermarket head unit to the SWC interface harness supplied in the FP7504K kit. It is not included in the FP7504K but is available separately and recommended to simplify the wiring installation process. Does the FP7504K support CANBUS vehicles? Yes. The SWC interface included in the FP7504K is CANBUS compatible and requires no additional interface modules for CANBUS-equipped Mazda 3 BK vehicles.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AXDISCL2 Amp Interface Data Integrator Chrysler A data interface for Chrysler vehicles, the AXDISCL2 retains factory steering wheel controls, OnStar, OEM Bluetooth, satellite radio, balance and fade, chimes, factory AUX, and rear seat entertainment when replacing the factory radio, with NAV outputs, accessory power, and micro USB firmware updating. Product Overview The Aerpro AXDISCL2 is a data integration interface designed for Chrysler vehicles. It provides retention of factory features that are typically lost when the factory radio is replaced, including OnStar, SYNC, OEM Bluetooth wireless connectivity, satellite radio, balance and fade, chimes, factory AUX-in jack, and rear seat entertainment. The AXDISCL2 incorporates patented built-in steering wheel control technology with a patented auto-detect feature that automatically detects the vehicle type, radio connection, and preset controls, while allowing dual-assignment of steering wheel controls. The interface supports non-amplified, analogue amplified, and digital amplified vehicle systems, though balance and fade are not retained on digital amplified models. NAV outputs provided include parking brake, reverse, and speed sense. Retained Accessory Power (R.A.P.) is also supported, along with telematics retention for SYNC, OnStar, and UVO. Accessory power output is 12V at 10A. Adjustable volume is available for OnStar. The AXDISCL2 is micro USB updatable for firmware updates. This product is dependent on the vehicle application; use the Vehicle Fit Guide to confirm compatibility with your specific Chrysler vehicle before purchase. Features & Benefits Patented Auto-Detect Steering Wheel Control Technology: The AXDISCL2 incorporates patented built-in SWC technology with an auto-detect feature that automatically identifies the vehicle type, radio connection, and preset controls, and allows dual-assignment of steering wheel controls with a compatible aftermarket head unit. OnStar, OEM Bluetooth, and Satellite Radio Retention: The AXDISCL2 retains OnStar, OEM Bluetooth wireless connectivity, and satellite radio functionality if equipped in the vehicle. Adjustable volume control is available for OnStar after installation. Telematics Retention - SYNC, OnStar, and UVO: The AXDISCL2 supports telematics retention for SYNC, OnStar, and UVO systems, maintaining vehicle telematics connectivity after the factory radio is replaced. Supports Non-Amplified, Analogue Amplified, and Digital Amplified Systems: The AXDISCL2 is designed for non-amplified, analogue amplified, and digital amplified Chrysler vehicles. Balance and fade are retained on non-amplified and analogue amplified models but are not supported on digital amplified models. Balance and Fade Retention: Balance and fade are retained when connected to compatible non-amplified or analogue amplified Chrysler vehicles. Digital amplified models are excluded from balance and fade retention. NAV Outputs - Parking Brake, Reverse, and Speed Sense: The AXDISCL2 provides parking brake, reverse, and speed sense NAV output feeds for compatible aftermarket head units that use these signals for safety, navigation, and speed-dependent functions. Retained Accessory Power (R.A.P.): The AXDISCL2 retains the vehicle's R.A.P. function, ensuring accessory features continue to operate after the ignition is turned off in accordance with the factory R.A.P. behaviour. 12V 10A Accessory Power Output: The AXDISCL2 provides a 12V 10A accessory power output for powering connected accessories. Chimes and Factory AUX-In Retention: Factory vehicle chimes and the factory AUX-in jack are retained after installation, preserving these OEM functions with the aftermarket head unit. Rear Seat Entertainment Retention: The AXDISCL2 retains rear seat entertainment functionality. RSE must have been activated by the factory radio prior to installation. Micro USB Updatable: The AXDISCL2 supports firmware updates via micro USB, allowing the interface to be updated for compatibility with new vehicle applications and software improvements. Technical Specs Specification Detail SKU AXDISCL2 Brand Aerpro Compatible Vehicles Chrysler Various Models Amplified System Support Non-Amplified, Analogue Amplified, Digital Amplified Accessory Power Output 12V, 10A Retained Accessory Power (R.A.P.) Yes SWC Technology Patented Built-In with Auto-Detect Dual-Assign SWC Yes OnStar Retention Yes OEM Bluetooth Retention Yes (if equipped) Satellite Radio Retention Yes (if equipped) OnStar Volume Adjustment Yes SYNC Retention Yes UVO Retention Yes Balance and Fade Retention Yes (excludes digital amplified models) Chimes Retention Yes Factory AUX-In Retention Yes Rear Seat Entertainment Retention Yes (RSE must be activated by factory radio) NAV Outputs Parking Brake, Reverse, Speed Sense Firmware Updates Micro USB updatable Compatible With The AXDISCL2 is designed for Chrysler vehicles. This product is dependent on the vehicle application. Use the Vehicle Fit Guide to confirm compatibility with your specific Chrysler vehicle before purchase. Balance and fade retention is not supported on digital amplified models. Rear seat entertainment retention requires RSE to have been activated by the factory radio prior to installation. Frequently Asked Questions Does the AXDISCL2 retain OnStar and OEM Bluetooth after the factory radio is replaced? Yes. The AXDISCL2 retains OnStar and OEM Bluetooth wireless connectivity when equipped in the vehicle. Adjustable volume control for OnStar is also provided through the interface. Does the AXDISCL2 retain balance and fade on all Chrysler vehicles? Balance and fade are retained on non-amplified and analogue amplified Chrysler vehicles. Digital amplified models are excluded from balance and fade retention. Does the AXDISCL2 support rear seat entertainment retention? Yes. The AXDISCL2 retains rear seat entertainment functionality. RSE must have been activated by the factory radio prior to the aftermarket head unit installation for RSE retention to function. How does the auto-detect steering wheel control feature work? The AXDISCL2 uses patented auto-detect technology to automatically identify the vehicle type, factory radio connection type, and preset steering wheel control configurations. This eliminates the need for manual programming of SWC inputs in most supported applications and also allows dual-assignment of steering wheel control buttons with the aftermarket head unit. How do I update the firmware on the AXDISCL2? The AXDISCL2 is updatable via micro USB connection. Connect a micro USB cable from the interface to a computer and follow the firmware update instructions provided by Aerpro to ensure the interface has the latest vehicle application support and software improvements.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro FP8597 Fascia Install Kit Nissan Skyline V35 2001-2004 Silver A vehicle-specific head unit installation kit for the Nissan Skyline V35 (2001-2004), the FP8597 is finished in silver to match the factory dashboard and includes a complete HVAC climate control panel replacement, mounting brackets, and antenna adaptor for a single or double DIN aftermarket head unit installation. Product Overview The Aerpro FP8597 is a fascia installation kit designed specifically for the Nissan Skyline V35 from 2001-2004. It provides a complete replacement of the factory climate control panel area in a silver painted finish that matches the factory dashboard, with a recessed DIN opening accommodating both single and double DIN aftermarket head units. The internal aperture measures 173mm wide by 98mm high. The kit retains full HVAC functionality in both factory single and dual climate control models, and retains the factory air vents in their original location. The FP8597 includes a fascia kit with integrated HVAC panel, mounting brackets, and an antenna adaptor. A comprehensive instruction manual and all necessary installation hardware are included. To further simplify the installation, the Aerpro SWNI3C steering wheel control interface or APP0120 vehicle ISO harness adaptor (both sold separately) can be used to connect the factory Nissan wiring harness and convert it to a universal ISO connector. If the vehicle was factory-fitted with navigation, a replacement non-navigation lid (genuine part) will need to be sourced and used to blank the hole from the existing navigation screen location before the FP8597 can be installed. Features & Benefits Nissan Skyline V35 2001-2004 Specific Design: The FP8597 is engineered specifically for the Nissan Skyline V35 from 2001-2004, providing a precise contoured fit that matches the factory dashboard profile. Silver Painted Finish to Match Factory Dashboard: The FP8597 is painted silver to match the factory interior finish of the Nissan Skyline V35, providing a factory-consistent appearance after installation. Complete HVAC Climate Control Panel Replacement: The FP8597 replaces the entire factory climate control panel rather than just the head unit surround, providing an integrated solution that maintains the OEM appearance of the full dashboard section. Retains Full HVAC Functionality - Single and Dual Climate Control: The FP8597 retains full heating, ventilation, and air conditioning functionality for both factory single and dual climate control configurations of the Skyline V35, with no loss of climate control operation after installation. Retains Factory Air Vents in Original Location: The custom design of the FP8597 allows the factory air vents to remain in their original positions within the dashboard, preserving the OEM interior layout and airflow characteristics. Accommodates Single or Double DIN Head Units: The FP8597 provides a recessed DIN opening with internal dimensions of 173mm wide by 98mm high, and includes a double DIN radio trim, accommodating both single and double DIN aftermarket head unit installations. Oversized Storage Pocket: The FP8597 includes an oversized storage pocket below the DIN opening, providing a useful storage area within the dashboard after installation. Antenna Adaptor Included: The FP8597 includes an antenna adaptor to ensure the factory antenna connection from the Nissan Skyline V35 interfaces correctly with the aftermarket head unit's antenna input. High-Grade ABS Plastic Construction: The fascia is manufactured from high-grade ABS plastic for long-term durability and dimensional stability in the in-vehicle environment. Comprehensive Instruction Manual and All Hardware Included: A comprehensive instruction manual and all necessary mounting hardware are included, supporting a complete DIY installation. Compatible with Aerpro SWNI3C and APP0120: The FP8597 is compatible with the Aerpro SWNI3C steering wheel control interface and the APP0120 vehicle ISO harness adaptor (both sold separately), which connect the factory Nissan wiring harness to a universal ISO connector for the aftermarket head unit. Technical Specs Specification Detail SKU FP8597 Brand Aerpro Compatible Vehicles Nissan Skyline V35, 2001-2004 Application Single or Double DIN Colour Silver Material High-Grade ABS Plastic Internal Dimensions 173mm W x 98mm H HVAC Panel Included (full replacement) Mounting Brackets Included Antenna Adaptor Included Double DIN Radio Trim Included Storage Pocket Oversized (included) Instruction Manual Comprehensive (included) Factory Nav Note Replacement non-navigation lid (genuine part) required if factory nav equipped Recommended Accessories Aerpro SWNI3C SWC Interface or APP0120 ISO Harness Adaptor (sold separately) What's in the Box Silver Fascia Kit (includes HVAC climate control panel) Mounting Brackets Antenna Adaptor Comprehensive Instruction Manual All Necessary Mounting Hardware Compatible With The FP8597 is designed for the Nissan Skyline V35 from 2001-2004 and accommodates both single and double DIN aftermarket head units. The internal aperture of 173mm wide by 98mm high suits standard single and double DIN head unit face dimensions. If the vehicle was factory-fitted with navigation, a replacement non-navigation lid (genuine Nissan part) must be sourced to blank the existing navigation screen aperture before the FP8597 can be installed. Compatible with the Aerpro SWNI3C SWC interface and APP0120 vehicle ISO harness adaptor (both sold separately) for a complete installation. Frequently Asked Questions Does the FP8597 retain the factory Nissan Skyline V35 climate controls? Yes. The FP8597 replaces the entire factory climate control panel and retains full HVAC functionality for both single and dual climate control configurations of the Nissan Skyline V35. All climate control functions remain accessible after installation. Is the FP8597 compatible with Skyline V35 models that had factory navigation? If the vehicle was factory-fitted with navigation, a replacement non-navigation lid (genuine Nissan part) must be sourced and used to blank the navigation screen aperture before the FP8597 can be installed. This genuine part is not included with the FP8597. Does the FP8597 suit both single and double DIN head units? Yes. The FP8597 accommodates both single and double DIN aftermarket head units, with an internal aperture of 173mm wide by 98mm high and a double DIN radio trim included in the kit. What additional parts are needed for a complete installation? The FP8597 provides the fascia, HVAC panel, mounting brackets, and antenna adaptor. To connect the factory Nissan wiring to the aftermarket head unit, the Aerpro APP0120 vehicle ISO harness adaptor is available separately. For steering wheel control retention, the Aerpro SWNI3C SWC interface is available separately. Does the FP8597 retain the factory air vents? Yes. The FP8597 is designed to retain the factory air vents of the Nissan Skyline V35 in their original dashboard positions, maintaining the OEM interior layout and airflow after installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWLR10C Steering Wheel Control Interface Land Rover Freelander 2 MOST 25 Amplified A CANBUS and fibre optic steering wheel control interface engineered for the Land Rover Freelander 2 (2007-2012) with MOST 25 amplified systems, the SWLR10C retains factory steering wheel controls and the MOST 25 OEM amplified system, and provides reverse trigger, park brake, speed pulse, illumination, and amp remote outputs with no wire cutting required. Product Overview The Aerpro SWLR10C is a CANBUS and fibre optic steering wheel control interface designed for the Land Rover Freelander 2 from 2007-2012 fitted with MOST 25 amplified systems. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. No additional modules are required for CANBUS or fibre optic vehicles. The SWLR10C is compatible with SW-type patch leads (sold separately), supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit, and retains the MOST 25 OEM amplified system. To maintain the MOST 25 OEM amplified system, the aftermarket head unit must have RCA pre-outs. The cable from the OEM display must be removed and replaced with the included MOST loop (orange wire) to reroute the signal during installation. After installation, the original navigation display will only show the Land Rover logo and does not support date or time retention. Outputs include reverse trigger (purple/white), park brake (green), speed pulse (pink), illumination (orange), and amp remote (blue). Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWLR10C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWLR10C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. CANBUS and Fibre Optic Integration - No Additional Modules Required: The SWLR10C uses CANBUS and fibre optic integration for direct communication with the vehicle's CANBUS network and MOST 25 fibre optic audio bus, eliminating the need for additional interface modules in the Land Rover Freelander 2. MOST 25 OEM Amplified System Retention: The SWLR10C retains the MOST 25 OEM amplified system in the vehicle. The aftermarket head unit must have RCA pre-outs for MOST 25 amplified system retention to function. The included MOST loop (orange wire) must be connected in place of the OEM display cable to reroute the fibre optic signal. MOST Loop (Orange Wire) Included for Signal Rerouting: The SWLR10C is supplied with a MOST loop (orange wire) that must be installed by removing the cable from the OEM display and replacing it with the loop to correctly reroute the MOST 25 fibre optic signal during installation. Vehicle-Specific Plug - No Wire Cutting Required: The SWLR10C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM Phone Button Support: The SWLR10C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Reverse Trigger Output (Purple/White): A reverse trigger output via a purple/white wire enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Park Brake Output (Green): A park brake output is provided via a green wire, supplying the park brake signal required by compatible aftermarket head units for safety feature operation. Speed Pulse Output (Pink): A speed pulse output is provided via a pink wire for aftermarket head units that require a vehicle speed signal for navigation or speed-dependent volume functions. Illumination Output (Orange): An illumination output is provided via an orange wire, allowing the aftermarket head unit to automatically adjust its display brightness in response to the vehicle's instrument illumination signal. Amp Remote Output (Blue): An amp remote output is provided via a blue wire for triggering the retained OEM amplifier and compatible external amplifiers when the head unit is powered on. Original Navigation Display Limitation: After installation, the original Land Rover navigation display will only show the Land Rover logo. Date and time retention are not supported. Compatible with Aerpro APP8 Secondary ISO Harness: The SWLR10C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWLR10C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWLR10C Brand Aerpro Compatible Vehicles Land Rover Freelander 2, 2007-2012 Interface Type CANBUS and Fibre Optic Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support No OEM Amplified System Retention Yes - MOST 25 (aftermarket head unit requires RCA pre-outs) MOST Loop Yes (orange wire, included) Reverse Trigger Output Yes (Purple/White) Park Brake Output Yes (Green) Speed Pulse Output Yes (Pink) Illumination Output Yes (Orange) Amp Remote Output Yes (Blue) Telephone Mute Output No Original Nav Display Shows Land Rover logo only after installation Date and Time Retention Not supported Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWLR10C is engineered for the Land Rover Freelander 2 from 2007-2012 fitted with MOST 25 amplified systems. To retain the MOST 25 OEM amplified system, the aftermarket head unit must have RCA pre-outs. The cable from the OEM display must be removed and replaced with the included MOST loop (orange wire) to reroute the fibre optic signal. After installation, the original navigation display will only show the Land Rover logo and date and time retention are not supported. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWLR10C require cutting of the factory wiring harness? No. The SWLR10C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWLR10C retain the MOST 25 OEM amplified system? Yes. The SWLR10C retains the MOST 25 OEM amplified system. The aftermarket head unit must have RCA pre-outs for the amplified system retention to function. The included MOST loop (orange wire) must be installed by removing the cable from the OEM display and replacing it with the loop to correctly reroute the fibre optic signal. What happens to the original navigation display after installing the SWLR10C? After installation, the original Land Rover navigation display will only show the Land Rover logo. Date and time retention are not supported. This is a known limitation of the SWLR10C on the Freelander 2 platform. Is a SWC patch lead included with the SWLR10C? No. A steering wheel control patch lead is required to use the SWLR10C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. What is the MOST loop included with the SWLR10C used for? The MOST loop (orange wire) is included to reroute the MOST 25 fibre optic signal after the OEM display cable is removed. During installation, the cable that connects to the OEM display must be disconnected and replaced with the MOST loop to maintain the integrity of the fibre optic signal loop required for MOST 25 amplified system retention.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWKI2C Steering Wheel Control Interface Hyundai and Kia Various Models SPDIF Amplified A CANBUS steering wheel control interface engineered for various Hyundai and Kia vehicles with OEM SPDIF digital amplifiers, the SWKI2C retains factory steering wheel controls and the OEM SPDIF digital amplifier with fader adjustment via the steering wheel controls, and provides reverse trigger, speed pulse, and amp remote outputs with no wire cutting required. Product Overview The Aerpro SWKI2C is a CANBUS steering wheel control interface designed for various Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWKI2C is compatible with SW-type patch leads (sold separately), supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit, and retains the OEM SPDIF digital amplifier while allowing fader adjustment via the steering wheel controls. Voice Assistant support is available; if the steering wheel controls do not include a dedicated Voice Assistant button, the answer button functions as voice support instead, provided the aftermarket head unit and paired phone also support the Voice Assistant feature. Outputs include reverse trigger, speed pulse (pink), and amp remote. Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWKI2C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWKI2C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. OEM SPDIF Digital Amplifier Retention with Fader Adjustment: The SWKI2C retains the OEM SPDIF digital amplifier in the vehicle and allows fader adjustment to be performed via the steering wheel controls, preserving the amplified audio system and its adjustability after the head unit upgrade. CANBUS Interface: The SWKI2C uses a CANBUS interface for direct communication with the vehicle's CANBUS network, enabling reliable integration with the supported Hyundai and Kia SPDIF amplified platforms. Vehicle-Specific Plug - No Wire Cutting Required: The SWKI2C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM Phone Button Support: The SWKI2C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit, allowing hands-free call answering and ending from the steering wheel controls. Voice Assistant Support: Voice Assistant support is available through the SWKI2C. If the steering wheel does not include a dedicated Voice Assistant button, the answer button functions as voice support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Reverse Trigger Output: A reverse trigger output enables automatic switching to the reverse camera input on the aftermarket head unit when reverse gear is selected. Speed Pulse Output (Pink): A speed pulse output is provided via a pink wire for aftermarket head units that require a vehicle speed signal for navigation or speed-dependent volume functions. Amp Remote Output: An amp remote output is provided for triggering the retained OEM SPDIF digital amplifier when the head unit is powered on. Compatible with Aerpro APP8 Secondary ISO Harness: The SWKI2C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWKI2C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWKI2C Brand Aerpro Compatible Vehicles Hyundai Various Models (SPDIF Amplified), Kia Various Models (SPDIF Amplified) Interface Type CANBUS Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support Yes OEM SPDIF Digital Amplifier Retention Yes (with fader adjustment via SWC) Reverse Trigger Output Yes Park Brake Output No Speed Pulse Output Yes (Pink) Illumination Output No Amp Remote Output Yes Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWKI2C is engineered for various Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. It is not suitable for Hyundai or Kia vehicles without SPDIF digital amplification. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWKI2C require cutting of the factory wiring harness? No. The SWKI2C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Does the SWKI2C retain the OEM SPDIF digital amplifier? Yes. The SWKI2C retains the OEM SPDIF digital amplifier and allows fader adjustment to be performed via the steering wheel controls after the head unit upgrade, preserving the amplified audio system functionality. Is a SWC patch lead included with the SWKI2C? No. A steering wheel control patch lead is required to use the SWKI2C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. Does the SWKI2C support Voice Assistant functions? Yes. Voice Assistant support is available. If the steering wheel does not have a dedicated Voice Assistant button, the answer button functions as voice support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Is the SWKI2C suitable for non-amplified Hyundai and Kia vehicles? No. The SWKI2C is designed specifically for Hyundai and Kia vehicles fitted with OEM SPDIF digital amplifiers. Non-amplified vehicles require a different interface. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro FP9214 Double DIN Fascia Mitsubishi Colt 2004-2008 A vehicle-specific Double DIN fascia panel for the Mitsubishi Colt from 2004-2008, the FP9214 is designed to provide a factory-matched finish around an aftermarket Double DIN head unit installation. Product Overview The Aerpro FP9214 is a Double DIN fascia panel designed specifically for the Mitsubishi Colt from 2004-2008. It is designed to match the dashboard contour of the Colt, providing a factory-fit appearance around an aftermarket Double DIN head unit installation. Features & Benefits Mitsubishi Colt 2004-2008 Specific Dashboard Fit: The FP9214 is designed to match the dashboard contour of the Mitsubishi Colt from 2004-2008 precisely, providing a factory-fit appearance around the aftermarket head unit opening. Double DIN Opening: The FP9214 provides the correct Double DIN aperture for the installation of standard Double DIN aftermarket head units into the Mitsubishi Colt dashboard. Technical Specs Specification Detail SKU FP9214 Brand Aerpro Compatible Vehicles Mitsubishi Colt, 2004-2008 Application Double DIN Compatible With The FP9214 is designed for the Mitsubishi Colt from 2004-2008 with a Double DIN head unit installation. Confirm compatibility with your specific Colt variant and build date before purchase. Frequently Asked Questions Is the FP9214 compatible with Single DIN head units? No. The FP9214 provides a Double DIN aperture and is designed for standard Double DIN aftermarket head units only. Does the FP9214 include wiring harnesses or steering wheel control adaptors? No. The FP9214 is a fascia panel only. Wiring harnesses, steering wheel control interfaces, and antenna adaptors need to be sourced separately for a complete installation. Which Mitsubishi Colt models is the FP9214 compatible with? The FP9214 is designed for the Mitsubishi Colt from 2004-2008. Confirm compatibility with your specific variant and build date before purchase. Does the FP9214 include mounting brackets? Mounting hardware details are not specified in the source data for this product. Confirm hardware inclusions with your supplier before purchase. What finish does the FP9214 have? The finish of the FP9214 is not specified in the source data. Confirm the finish with your supplier before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro SWTO2C Steering Wheel Control Interface Toyota Various Models An analogue steering wheel control interface engineered for various Toyota vehicles with Fujitsu Ten or Matsushita original head units and a 20-pin connector, the SWTO2C retains factory steering wheel controls with a vehicle-specific plug connection that requires no cutting of the factory wiring harness. Product Overview The Aerpro SWTO2C is an analogue steering wheel control interface designed for various Toyota vehicles fitted with Fujitsu Ten or Matsushita original head units and a 20-pin connector. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWTO2C is compatible with SW-type patch leads (sold separately). Custom button remapping is available and requires a USB-C cable (sold separately). Installation is simplified when the SWTO2C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWTO2C interface. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. The SWTO2C is not compatible with factory OEM amplified or factory upgraded systems. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWTO2C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. Specific to Toyota Models with Fujitsu Ten or Matsushita Head Units and 20-Pin Connector: The SWTO2C is engineered specifically for Toyota vehicles fitted with Fujitsu Ten or Matsushita original head units and a 20-pin connector. This specific compatibility ensures correct signal interpretation for the steering wheel control inputs on these Toyota factory configurations. Vehicle-Specific Plug - No Wire Cutting Required: The SWTO2C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. Analogue Interface Type: The SWTO2C uses an analogue interface type, compatible with the steering wheel control signal architecture used in the supported Toyota vehicles with Fujitsu Ten or Matsushita head units. Custom Button Remapping Available: The SWTO2C supports optional custom button remapping to customise the steering wheel control button configuration. Remapping requires a USB-C cable (sold separately). Not Compatible with OEM Amplified or Factory Upgraded Systems: The SWTO2C is not compatible with Toyota vehicles fitted with factory OEM amplified or factory upgraded sound systems. Use the Aerpro Vehicle Selector to confirm compatibility with your specific vehicle before purchase. Compatible with Aerpro APP8 Secondary ISO Harness: The SWTO2C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWTO2C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWTO2C Brand Aerpro Compatible Vehicles Toyota Various Models with Fujitsu Ten or Matsushita OEM Head Unit and 20-Pin Connector Interface Type Analogue Patch Lead Type SW Phone Button Compatibility No Voice Assistant Support No OEM Amplified System Not compatible OEM Factory Upgraded System Not compatible Reverse Trigger Output No Park Brake Output No Speed Pulse Output No Illumination Output No Amp Remote Output No Telephone Mute Output No Custom Button Remapping Yes (USB-C cable required, sold separately) Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWTO2C is engineered for various Toyota vehicles fitted with Fujitsu Ten or Matsushita original head units and a 20-pin connector. It is not compatible with Toyota vehicles fitted with factory OEM amplified or factory upgraded sound systems. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWTO2C require cutting of the factory wiring harness? No. The SWTO2C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Is a SWC patch lead included with the SWTO2C? No. A steering wheel control patch lead is required to use the SWTO2C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. How do I know if my Toyota has a Fujitsu Ten or Matsushita head unit with a 20-pin connector? The factory head unit brand and connector type can be confirmed by checking the factory head unit label or by using the Aerpro Vehicle Selector at aerpro.com to confirm whether the SWTO2C is the correct part for your specific Toyota model and build date. Does the SWTO2C support phone button or Voice Assistant functions? No. The SWTO2C does not support phone button or Voice Assistant functions. Only standard audio steering wheel control functions are supported. Is the SWTO2C suitable for Toyota vehicles with a factory amplified sound system? No. The SWTO2C is not compatible with Toyota vehicles fitted with factory OEM amplified or factory upgraded sound systems. Use the Aerpro Vehicle Selector to confirm whether your specific vehicle has a factory amplified or upgraded system before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Car Stereo Headunit Installation Made Easy. DNA PEU-K16044Fascia Panel To Suit Peugeot 407 and Citroen C5, Perfectly Matches Dash Contour. Product Specifications: DIN Size: Single DIN Colour: Grey Material: Factory Textured ABS Plastic. Packaging: Sliding Blister & Card. Legendary Products & Support From Authorized Dealers When you choose DNA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized DNA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by DNA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized DNA dealer today!

Read more less

Aerpro SWMB2C Steering Wheel Control Interface Citroen Mitsubishi and Peugeot Various Models An analogue steering wheel control interface engineered for various Citroen, Mitsubishi, and Peugeot vehicles without OEM amplified sound systems, the SWMB2C retains factory steering wheel controls and OEM AUX input with a vehicle-specific plug connection that requires no cutting of the factory wiring harness. Product Overview The Aerpro SWMB2C is an analogue steering wheel control interface designed for various Citroen, Mitsubishi, and Peugeot vehicles without OEM amplified sound systems. It includes a harness fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. The SWMB2C is compatible with SW-type patch leads (sold separately) and supports the OEM phone button when connected to a compatible aftermarket Bluetooth head unit. OEM AUX retention is also supported when the aftermarket head unit has a rear RCA AUX input. Voice Assistant support is available; if the steering wheel controls do not include a dedicated Voice Assistant button, the answer button functions as phone support instead, provided the aftermarket head unit and paired phone also support the Voice Assistant feature. Custom button remapping is available and requires a USB-C cable (sold separately). Phone buttons on steering wheels do not support Sony aftermarket head unit models: the Answer button functions as Mute and the Hang Up button functions as Source on Sony units. Alpine, Clarion, Kenwood, Pioneer, and Zenec head units support the phone button. Installation is simplified when the SWMB2C is paired with the optional Aerpro APP8 Headunit Secondary ISO Harness (sold separately). The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. The SWMB2C is not suitable for OEM amplified vehicles. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. Features & Benefits Retains Factory Steering Wheel Controls with Aftermarket Head Unit: The SWMB2C allows the factory steering wheel audio controls to operate with a compatible aftermarket head unit, maintaining hands-on-the-wheel control without requiring the driver to reach for the head unit directly. Vehicle-Specific Plug - No Wire Cutting Required: The SWMB2C harness is fitted with a vehicle-specific plug engineered to connect directly into the existing factory wiring in the vehicle. No cutting or modification of the factory wiring harness is required, simplifying installation and preserving the factory wiring integrity. OEM AUX Input Retention: The SWMB2C supports OEM AUX retention when connected to a compatible aftermarket head unit with a rear RCA AUX input, retaining the factory AUX input functionality after the head unit upgrade. Analogue Interface Type: The SWMB2C uses an analogue interface type, compatible with the steering wheel control signal architecture used in the supported Citroen, Mitsubishi, and Peugeot vehicles. OEM Phone Button Support: The SWMB2C supports the OEM phone button on the steering wheel when connected to a compatible aftermarket Bluetooth head unit. Phone button support is available on Alpine, Clarion, Kenwood, Pioneer, and Zenec head units. On Sony head units, the Answer button functions as Mute and the Hang Up button functions as Source. Voice Assistant Support: Voice Assistant support is available through the SWMB2C. If the steering wheel does not include a dedicated Voice Assistant button, the answer button functions as phone support instead. The aftermarket head unit and paired phone must also support the Voice Assistant feature for this to operate. Custom Button Remapping Available: The SWMB2C supports optional custom button remapping to customise the steering wheel control button configuration. Remapping requires a USB-C cable (sold separately). Not Suitable for OEM Amplified Vehicles: The SWMB2C is not suitable for Citroen, Mitsubishi, or Peugeot vehicles fitted with OEM amplified sound systems. Use the Aerpro Vehicle Selector to confirm compatibility with your specific vehicle before purchase. Compatible with Aerpro APP8 Secondary ISO Harness: The SWMB2C is recommended to be installed with the Aerpro APP8 Headunit Secondary ISO Harness (sold separately), which connects between the aftermarket head unit and the SWMB2C interface for a simplified and complete installation. Technical Specs Specification Detail SKU SWMB2C Brand Aerpro Compatible Vehicles Citroen Various Models, Mitsubishi Various Models, Peugeot Various Models Interface Type Analogue Patch Lead Type SW Phone Button Compatibility Yes Voice Assistant Support Yes OEM AUX Input Retention Yes (aftermarket head unit requires rear RCA AUX input) OEM Amplified System Not suitable Reverse Trigger Output No Park Brake Output No Speed Pulse Output No Illumination Output No Amp Remote Output No Custom Button Remapping Yes (USB-C cable required, sold separately) Sony Head Unit Note Answer button = Mute, Hang Up button = Source Compatible Head Unit Brands (Phone Button) Alpine, Clarion, Kenwood, Pioneer, Zenec Recommended Accessory Aerpro APP8 Headunit Secondary ISO Harness (sold separately) SWC Patch Lead Required (sold separately) Compatible With The SWMB2C is engineered for various Citroen, Mitsubishi, and Peugeot vehicles without OEM amplified sound systems. It is not suitable for vehicles with OEM amplified systems. Use the Aerpro Vehicle Selector to confirm the correct part for your specific vehicle before purchase. The aftermarket head unit must be SWC compatible and steering wheel control functions may vary from OEM functions. Frequently Asked Questions Does the SWMB2C require cutting of the factory wiring harness? No. The SWMB2C harness is fitted with a vehicle-specific plug that connects directly into the existing factory wiring in the vehicle without cutting or modifying the factory harness. Is a SWC patch lead included with the SWMB2C? No. A steering wheel control patch lead is required to use the SWMB2C and must be purchased separately. Use the Aerpro Vehicle Selector to confirm the correct patch lead for your vehicle. Does the SWMB2C retain the factory AUX input? Yes. The SWMB2C supports OEM AUX input retention when connected to a compatible aftermarket head unit with a rear RCA AUX input. Is the SWMB2C compatible with Sony aftermarket head units for phone button functions? Partially. On Sony head units, the phone button functions are remapped: the Answer button functions as Mute and the Hang Up button functions as Source. Full phone button support is available on Alpine, Clarion, Kenwood, Pioneer, and Zenec head units. Is the SWMB2C suitable for vehicles with an OEM amplified sound system? No. The SWMB2C is not suitable for Citroen, Mitsubishi, or Peugeot vehicles fitted with OEM amplified sound systems. Use the Aerpro Vehicle Selector to confirm whether your specific vehicle has an OEM amplified system before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less