Aerpro AX8083KC 6.8" Multimedia Head Unit Upgrade Kit Ford Ranger PX A fully matched upgrade kit for the Ford Ranger PX (2012-2015), the AX8083KC combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including hazard light and door locking buttons, a chime speaker, and an antenna adaptor, plus a 720P AHD surface mount camera, all in one box. Product Overview The AX8083KC is Aerpro's complete head unit upgrade solution engineered for the Ford Ranger PX from 2012-2015. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Ranger PX dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, a steering wheel control interface, hazard light and door locking buttons, a chime speaker, an antenna adaptor, and a universal SWC patch lead, ensuring factory steering wheel controls, hazard light button, door locking controls, chime alert function, and antenna connection are all retained or provided after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Ford Ranger PX 2012-2015: The AX8083KC includes all components required for a complete installation in the Ford Ranger PX from 2012-2015 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, SWC interface, hazard light and door locking buttons, chime speaker, antenna adaptor, and patch lead requirements of the Ranger PX platform. Hazard Light and Door Locking Buttons Included: The Ford Ranger PX (2012-2015) integrates the hazard light and door locking controls into the head unit fascia panel. The vehicle-specific installation kit includes replacement hazard light and door locking buttons that mount within the new black fascia, ensuring these factory controls remain accessible and functional after the head unit replacement without requiring any modification to the vehicle's existing wiring. Chime Speaker Included: The Ranger PX uses a chime speaker associated with the head unit assembly for vehicle alert sounds. The vehicle-specific installation kit includes a chime speaker that connects to the new head unit wiring, retaining the chime functionality after installation. Antenna Adaptor Included: The vehicle-specific installation kit includes an antenna adaptor to ensure the factory antenna connection from the Ranger PX interfaces correctly with the head unit's antenna input, maintaining full AM and FM signal performance after installation without requiring a separate adaptor. Black Fascia Kit for Ranger PX Dashboard Integration: The included black fascia kit is designed specifically for the Ford Ranger PX (2012-2015) dashboard profile, providing a factory-fit finish around the 6.8" head unit that integrates with the interior trim and accommodates the hazard light and door locking button positions specific to this Ranger generation. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Ranger PX. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the included surface mount camera and a second camera to be connected simultaneously, supporting configurations such as front and reverse or reverse and towing cameras. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Ranger PX interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX8083KC Brand Aerpro Compatible Vehicles Ford Ranger PX, 2012-2015 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black Hazard Light Button Yes (included) Door Locking Button Yes (included) Chime Speaker Yes (included) Antenna Adaptor Yes (included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface Hazard Light and Door Locking Buttons Chime Speaker Antenna Adaptor Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX8083KC is engineered for the Ford Ranger PX from 2012-2015. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions Why does the AX8083KC include hazard light and door locking buttons? The Ford Ranger PX (2012-2015) integrates the hazard light and door locking controls into the head unit fascia panel rather than mounting them elsewhere on the dashboard. When the factory head unit is replaced, these buttons must be relocated within the new aftermarket fascia to remain accessible. The AX8083KC vehicle-specific installation kit includes replacement hazard light and door locking buttons that mount directly within the new black fascia, retaining these factory controls in their correct position without modification to the vehicle's existing wiring. Why does the AX8083KC include a chime speaker? The Ford Ranger PX uses a chime speaker that is physically housed with or connected through the factory head unit assembly for vehicle alert sounds such as door ajar, seatbelt, and other audible warnings. The vehicle-specific installation kit includes a chime speaker that connects to the new head unit wiring, retaining the chime functionality after the head unit replacement. Does the AX8083KC retain the factory Ford Ranger PX steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Can the included 720P AHD camera be used as a towing camera instead of a reverse camera? Yes. The included 720P AHD surface mount camera can be installed and configured as a front, rear, or reverse camera depending on the installation requirement, including as a towing camera mounted at the rear of the vehicle. It connects to either of the head unit's two AHD 720P-compatible camera inputs via the included 6-metre RCA cable with in-line reverse trigger wire. Can external amplifiers be connected to the AX8083KC? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX8298K 6.8" Multimedia Head Unit Upgrade Kit Holden Colorado Z71 and Trailblazer LTZ A fully matched upgrade kit for the Holden Colorado Z71 and Trailblazer LTZ (2017-2020), the AX8298K combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including an Infodapter steering wheel control interface, reverse camera retention lead, and antenna adaptor, plus a 720P AHD surface mount camera, all in one box. Product Overview The AX8298K is Aerpro's complete head unit upgrade solution engineered for the Holden Colorado Z71 and Trailblazer LTZ from 2017-2020. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the shared Colorado Z71 and Trailblazer LTZ dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, an Infodapter steering wheel control interface, a reverse camera retention lead, an antenna adaptor, and a universal SWC patch lead, ensuring factory steering wheel controls, factory reverse camera, and antenna connection are all retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Holden Colorado Z71 and Trailblazer LTZ 2017-2020: The AX8298K includes all components required for a complete installation across the Holden Colorado Z71 and Trailblazer LTZ from 2017-2020 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, Infodapter SWC interface, reverse camera retention lead, antenna adaptor, and patch lead requirements of these platforms. Infodapter Steering Wheel Control Interface: The vehicle-specific installation kit includes an Infodapter SWC interface that connects to the vehicle's factory steering wheel control signals and translates them for compatibility with the new head unit. This Infodapter-based integration provides reliable steering wheel control retention specific to the Colorado Z71 and Trailblazer LTZ electrical architecture. Reverse Camera Retention Lead Included: The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Antenna Adaptor Included: The vehicle-specific installation kit includes an antenna adaptor to ensure the factory antenna connection from the Colorado Z71 and Trailblazer LTZ interfaces correctly with the head unit's antenna input, maintaining full AM and FM signal performance after installation without requiring a separate adaptor. Black Fascia Kit for Colorado Z71 and Trailblazer LTZ Dashboard Integration: The included black fascia kit is designed specifically for the Holden Colorado Z71 and Trailblazer LTZ (2017-2020) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of these models. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Colorado Z71 and Trailblazer LTZ. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the retained factory reverse camera and the included surface mount camera to be connected simultaneously, supporting configurations such as factory reverse and a front or towing camera. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Colorado Z71 and Trailblazer LTZ interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX8298K Brand Aerpro Compatible Vehicles Holden Colorado Z71 2017-2020, Holden Trailblazer LTZ 2017-2020 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black SWC Interface Infodapter (included) OEM Reverse Camera Retention Yes (retention lead included) Antenna Adaptor Yes (included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Infodapter Steering Wheel Control Interface Reverse Camera Retention Lead Antenna Adaptor Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX8298K is engineered for the Holden Colorado Z71 and Trailblazer LTZ from 2017-2020. Head Unit Upgrade Kits can vary between vehicle models and variants. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions Is the AX8298K compatible with all Colorado and Trailblazer variants from 2017-2020? The AX8298K is specified for the Holden Colorado Z71 and Trailblazer LTZ variants from 2017-2020. Other Colorado and Trailblazer variants from this period may use a different installation kit. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm the correct kit for your specific variant and build date before purchase. Does the AX8298K retain the factory reverse camera? Yes. The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Does the AX8298K retain the factory steering wheel controls? Yes. The vehicle-specific installation kit includes an Infodapter steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Can the included 720P AHD camera be used alongside the retained factory reverse camera? Yes. The head unit provides two independent AHD 720P-compatible camera inputs. The factory reverse camera connects through the retention lead to one camera input, and the included 720P AHD surface mount camera can be connected to the second camera input for use as a front or towing camera, supporting dual camera configurations. Can external amplifiers be connected to the AX8298K? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX8299K 6.8" Multimedia Head Unit Upgrade Kit Holden Colorado Z71 and Trailblazer LTZ A fully matched upgrade kit for the Holden Colorado Z71 and Trailblazer LTZ (2017-2020), the AX8299K combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including an Infodapter steering wheel control interface, reverse camera retention lead, and antenna adaptor, plus a 720P AHD surface mount camera, all in one box. Product Overview The AX8299K is Aerpro's complete head unit upgrade solution engineered for the Holden Colorado Z71 and Trailblazer LTZ from 2017-2020. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the shared Colorado Z71 and Trailblazer LTZ dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, an Infodapter steering wheel control interface, a reverse camera retention lead, an antenna adaptor, and a universal SWC patch lead, ensuring factory steering wheel controls, factory reverse camera, and antenna connection are all retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Holden Colorado Z71 and Trailblazer LTZ 2017-2020: The AX8299K includes all components required for a complete installation across the Holden Colorado Z71 and Trailblazer LTZ from 2017-2020 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, Infodapter SWC interface, reverse camera retention lead, antenna adaptor, and patch lead requirements of these platforms. Infodapter Steering Wheel Control Interface: The vehicle-specific installation kit includes an Infodapter SWC interface that connects to the vehicle's factory steering wheel control signals and translates them for compatibility with the new head unit. This Infodapter-based integration provides reliable steering wheel control retention specific to the Colorado Z71 and Trailblazer LTZ electrical architecture. Reverse Camera Retention Lead Included: The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Antenna Adaptor Included: The vehicle-specific installation kit includes an antenna adaptor to ensure the factory antenna connection from the Colorado Z71 and Trailblazer LTZ interfaces correctly with the head unit's antenna input, maintaining full AM and FM signal performance after installation without requiring a separate adaptor. Black Fascia Kit for Colorado Z71 and Trailblazer LTZ Dashboard Integration: The included black fascia kit is designed specifically for the Holden Colorado Z71 and Trailblazer LTZ (2017-2020) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of these models. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Colorado Z71 and Trailblazer LTZ. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the retained factory reverse camera and the included surface mount camera to be connected simultaneously, supporting configurations such as factory reverse and a front or towing camera. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Colorado Z71 and Trailblazer LTZ interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX8299K Brand Aerpro Compatible Vehicles Holden Colorado Z71 2017-2020, Holden Trailblazer LTZ 2017-2020 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black SWC Interface Infodapter (included) OEM Reverse Camera Retention Yes (retention lead included) Antenna Adaptor Yes (included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Infodapter Steering Wheel Control Interface Reverse Camera Retention Lead Antenna Adaptor Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX8299K is engineered for the Holden Colorado Z71 and Trailblazer LTZ from 2017-2020. Head Unit Upgrade Kits can vary between vehicle models and variants. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions Is the AX8299K compatible with all Colorado and Trailblazer variants from 2017-2020? The AX8299K is specified for the Holden Colorado Z71 and Trailblazer LTZ variants from 2017-2020. Other Colorado and Trailblazer variants from this period may require a different kit. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm the correct kit for your specific variant and build date before purchase. Does the AX8299K retain the factory reverse camera? Yes. The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Does the AX8299K retain the factory steering wheel controls? Yes. The vehicle-specific installation kit includes an Infodapter steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Can the included 720P AHD camera be used alongside the retained factory reverse camera? Yes. The head unit provides two independent AHD 720P-compatible camera inputs. The factory reverse camera connects through the retention lead to one camera input, and the included 720P AHD surface mount camera can be connected to the second camera input for use as a front or towing camera, supporting dual camera configurations. Can external amplifiers be connected to the AX8299K? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX9021KC 6.8" Multimedia Head Unit Upgrade Kit Holden Cruze A fully matched upgrade kit for the Holden Cruze (2009-2016), the AX9021KC combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including an Infodapter steering wheel control interface, reverse camera retention lead, and antenna adaptor, plus a 720P AHD surface mount camera, all in one box. Product Overview The AX9021KC is Aerpro's complete head unit upgrade solution engineered for the Holden Cruze JG and JH from 2009-2016. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Cruze dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, an Infodapter steering wheel control interface, a reverse camera retention lead, an antenna adaptor, and a universal SWC patch lead, ensuring factory steering wheel controls, factory reverse camera, and antenna connection are all retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Holden Cruze 2009-2016: The AX9021KC includes all components required for a complete installation in the Holden Cruze JG and JH from 2009-2016 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, Infodapter SWC interface, reverse camera retention lead, antenna adaptor, and patch lead requirements of the Cruze platform. Infodapter Steering Wheel Control Interface: The vehicle-specific installation kit includes an Infodapter SWC interface that connects to the Cruze's factory steering wheel control signals and translates them for compatibility with the new head unit, providing reliable steering wheel control retention specific to the Holden Cruze JG and JH electrical architecture. Reverse Camera Retention Lead Included: The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Antenna Adaptor Included: The vehicle-specific installation kit includes an antenna adaptor to ensure the factory antenna connection from the Holden Cruze interfaces correctly with the head unit's antenna input, maintaining full AM and FM signal performance after installation without requiring a separate adaptor. Black Fascia Kit for Holden Cruze Dashboard Integration: The included black fascia kit is designed specifically for the Holden Cruze JG and JH (2009-2016) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of this Cruze generation. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Holden Cruze 2009-2016. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the retained factory reverse camera and the included surface mount camera to be connected simultaneously, supporting configurations such as factory reverse and a front or additional rear camera. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Cruze interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX9021KC Brand Aerpro Compatible Vehicles Holden Cruze JG 2009-2016, Holden Cruze JH 2009-2016 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black SWC Interface Infodapter (included) OEM Reverse Camera Retention Yes (retention lead included) Antenna Adaptor Yes (included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Infodapter Steering Wheel Control Interface Reverse Camera Retention Lead Antenna Adaptor Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX9021KC is engineered for the Holden Cruze JG and JH from 2009-2016. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions Does the AX9021KC retain the factory Holden Cruze reverse camera? Yes. The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Does the AX9021KC retain the factory Holden Cruze steering wheel controls? Yes. The vehicle-specific installation kit includes an Infodapter steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. What generation of Holden Cruze is the AX9021KC compatible with? The AX9021KC is engineered for the Holden Cruze JG and JH generations from 2009-2016. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific build date and variant before purchase. Can the included 720P AHD camera be used alongside the retained factory reverse camera? Yes. The head unit provides two independent AHD 720P-compatible camera inputs. The factory reverse camera connects through the retention lead to one camera input, and the included 720P AHD surface mount camera can be connected to the second camera input for use as a front or additional camera, supporting dual camera configurations. Can external amplifiers be connected to the AX9021KC? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX8246K 6.8" Multimedia Head Unit Upgrade Kit Hyundai iLoad iMax A fully matched upgrade kit for the Hyundai iLoad and iMax (2015-2017), the AX8246K combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific matte black fascia installation kit including a USB retention harness and antenna adaptor, plus a 720P AHD surface mount camera, all in one box. Product Overview The AX8246K is Aerpro's complete head unit upgrade solution engineered for the Hyundai iLoad and iMax from 2015-2017. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the shared iLoad and iMax dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a matte black fascia kit, a steering wheel control interface, a USB retention harness, an antenna adaptor, and a universal SWC patch lead, ensuring factory steering wheel controls, factory USB input, and antenna connection are all retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Hyundai iLoad and iMax 2015-2017: The AX8246K includes all components required for a complete installation across the Hyundai iLoad and iMax from 2015-2017 without additional accessory sourcing. The vehicle-specific installation kit covers the matte black fascia, SWC interface, USB retention harness, antenna adaptor, and patch lead requirements shared across these platforms. Matte Black Fascia Kit for iLoad and iMax Dashboard Integration: The included matte black fascia kit is designed specifically for the Hyundai iLoad and iMax dashboard profile from 2015-2017, providing a factory-fit finish around the 6.8" head unit that integrates with the interior trim of these updated van and people mover models. The matte black finish of the AX8246K distinguishes it from the AX7320K and AX7320GK which suit the earlier iLoad and iMax generation (2008-2015). USB Retention Harness Included: The vehicle-specific installation kit includes a USB retention harness that connects the factory USB input point in the iLoad and iMax interior to the rear USB input of the new head unit, retaining the factory USB port functionality for media playback and device connection after installation. Antenna Adaptor Included: The vehicle-specific installation kit includes an antenna adaptor to ensure the factory antenna connection from the Hyundai iLoad and iMax interfaces correctly with the head unit's antenna input, maintaining full AM and FM signal performance after installation without requiring a separate adaptor. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the iLoad and iMax. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the included surface mount camera and a second camera to be connected simultaneously, supporting configurations such as front and reverse or reverse and towing cameras. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the iLoad and iMax interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX8246K Brand Aerpro Compatible Vehicles Hyundai iLoad 2015-2017, Hyundai iMax 2015-2017 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Matte Black USB Retention Harness Yes (included) Antenna Adaptor Yes (included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Matte Black Fascia Kit Steering Wheel Control Interface USB Retention Harness Antenna Adaptor Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX8246K is engineered for the Hyundai iLoad and iMax from 2015-2017. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions What is the difference between the AX8246K and the AX7320K and AX7320GK for Hyundai iLoad and iMax? The AX8246K suits the Hyundai iLoad and iMax from 2015-2017 and includes a matte black fascia, USB retention harness, antenna adaptor, and SWC interface. The AX7320K and AX7320GK suit the earlier iLoad and iMax from 2008-2015 and include an antenna adaptor and SWC interface without a USB retention harness, with black and silver fascia options respectively. The 2015-2017 models differ in dashboard profile and wiring configuration from the earlier generation. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm the correct kit for your specific vehicle and build date. Does the AX8246K retain the factory Hyundai iLoad and iMax steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Does the AX8246K retain the factory iLoad and iMax USB input? Yes. The vehicle-specific installation kit includes a USB retention harness that connects the factory USB input point in the iLoad and iMax interior to the rear USB input of the new head unit, retaining the factory USB port functionality for media playback and device connection after installation. Can the included 720P AHD camera be used as a front camera instead of a reverse camera? Yes. The included 720P AHD surface mount camera can be installed and configured as a front, rear, or reverse camera depending on the installation requirement. It connects to either of the head unit's two AHD 720P-compatible camera inputs via the included 6-metre RCA cable with in-line reverse trigger wire. If used as a front camera, the reverse trigger wire would not be connected and the camera would need to be activated through an alternative trigger or manual input method depending on the head unit's camera activation settings. Can external amplifiers be connected to the AX8246K? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX8247K 6.8" Multimedia Head Unit Upgrade Kit Hyundai iLoad iMax Black and Silver A fully matched upgrade kit for the Hyundai iLoad and iMax (2015-2017), the AX8247K combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black and silver fascia installation kit including a USB retention harness and antenna adaptor, plus a 720P AHD surface mount camera, all in one box. Product Overview The AX8247K is Aerpro's complete head unit upgrade solution engineered for the Hyundai iLoad and iMax from 2015-2017. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the shared iLoad and iMax dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black and silver fascia kit, a steering wheel control interface, a USB retention harness, an antenna adaptor, and a universal SWC patch lead, ensuring factory steering wheel controls, factory USB input, and antenna connection are all retained after installation. The AX8247K is the black and silver fascia variant of this kit, with the AX8246K providing the same specification in a matte black fascia finish. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Hyundai iLoad and iMax 2015-2017: The AX8247K includes all components required for a complete installation across the Hyundai iLoad and iMax from 2015-2017 without additional accessory sourcing. The vehicle-specific installation kit covers the black and silver fascia, SWC interface, USB retention harness, antenna adaptor, and patch lead requirements shared across these platforms. Black and Silver Fascia Kit for iLoad and iMax Dashboard Integration: The included black and silver fascia kit is designed specifically for the Hyundai iLoad and iMax dashboard profile from 2015-2017, providing a factory-fit finish around the 6.8" head unit that integrates with the two-tone interior trim of these van and people mover models. The AX8247K is the black and silver fascia variant, with the AX8246K providing the same specification in a matte black fascia finish. USB Retention Harness Included: The vehicle-specific installation kit includes a USB retention harness that connects the factory USB input point in the iLoad and iMax interior to the rear USB input of the new head unit, retaining the factory USB port functionality for media playback and device connection after installation. Antenna Adaptor Included: The vehicle-specific installation kit includes an antenna adaptor to ensure the factory antenna connection from the Hyundai iLoad and iMax interfaces correctly with the head unit's antenna input, maintaining full AM and FM signal performance after installation without requiring a separate adaptor. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the iLoad and iMax. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the included surface mount camera and a second camera to be connected simultaneously, supporting configurations such as front and reverse or reverse and towing cameras. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the iLoad and iMax interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX8247K Brand Aerpro Compatible Vehicles Hyundai iLoad 2015-2017, Hyundai iMax 2015-2017 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black and Silver USB Retention Harness Yes (included) Antenna Adaptor Yes (included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black and Silver Fascia Kit Steering Wheel Control Interface USB Retention Harness Antenna Adaptor Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX8247K is engineered for the Hyundai iLoad and iMax from 2015-2017. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions What is the difference between the AX8247K and the AX8246K? Both the AX8247K and AX8246K are complete head unit upgrade kits for the Hyundai iLoad and iMax from 2015-2017, sharing the same head unit specification, USB retention harness, antenna adaptor, SWC interface, and 720P AHD surface mount camera. The only difference is fascia finish: the AX8247K includes a black and silver fascia, while the AX8246K includes a matte black fascia. Choose based on which finish best matches the interior trim of the specific vehicle. Does the AX8247K retain the factory Hyundai iLoad and iMax steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Does the AX8247K retain the factory iLoad and iMax USB input? Yes. The vehicle-specific installation kit includes a USB retention harness that connects the factory USB input point in the iLoad and iMax interior to the rear USB input of the new head unit, retaining the factory USB port functionality for media playback and device connection after installation. Can the included 720P AHD camera be used as a front camera instead of a reverse camera? Yes. The included 720P AHD surface mount camera can be installed and configured as a front, rear, or reverse camera depending on the installation requirement. It connects to either of the head unit's two AHD 720P-compatible camera inputs via the included 6-metre RCA cable with in-line reverse trigger wire. If used as a front camera, the reverse trigger wire would not be connected and the camera would need to be activated through an alternative trigger or manual input method depending on the head unit's camera activation settings. Can external amplifiers be connected to the AX8247K? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX8529K 6.8" Multimedia Head Unit Upgrade Kit Mercedes Sprinter A fully matched upgrade kit for the Mercedes Sprinter (2007-2018), the AX8529K combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including antenna adaptors and a 720P AHD surface mount camera, all in one box. Product Overview The AX8529K is Aerpro's complete head unit upgrade solution engineered for the Mercedes Sprinter from 2007-2018. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Sprinter dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, a steering wheel control interface, antenna adaptors, and a universal SWC patch lead, ensuring factory steering wheel controls are retained and that the factory antenna connection interfaces correctly with the new head unit. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Mercedes Sprinter 2007-2018: The AX8529K includes all components required for a complete installation in the Mercedes Sprinter from 2007-2018 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, SWC interface, antenna adaptors, and patch lead requirements of the Sprinter platform. Antenna Adaptors Included: The vehicle-specific installation kit includes antenna adaptors to ensure the factory antenna connection from the Mercedes Sprinter interfaces correctly with the head unit's antenna input, maintaining full AM and FM signal performance after installation without requiring separately sourced antenna accessories. Black Fascia Kit for Mercedes Sprinter Dashboard Integration: The included black fascia kit is designed specifically for the Mercedes Sprinter (2007-2018) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of the Sprinter across this production range. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Mercedes Sprinter. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the included surface mount camera and a second camera to be connected simultaneously, supporting configurations such as front and reverse cameras or reverse and towing cameras. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Sprinter interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX8529K Brand Aerpro Compatible Vehicles Mercedes Sprinter, 2007-2018 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black Antenna Adaptors Yes (included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface Antenna Adaptors Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX8529K is engineered for the Mercedes Sprinter from 2007-2018. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions Does the AX8529K retain the factory Mercedes Sprinter steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Why does the AX8529K include antenna adaptors rather than a single adaptor? The Mercedes Sprinter uses an antenna connection configuration that requires multiple adaptors to correctly interface the factory antenna connectors with the head unit's antenna input. The vehicle-specific installation kit includes the antenna adaptors required for this platform, ensuring full AM and FM signal performance is maintained after installation without requiring additional accessories to be sourced. Does the AX8529K include a reverse camera retention lead for the Sprinter's factory reverse camera? No. The vehicle-specific installation kit for the AX8529K does not include a reverse camera retention lead. The 720P AHD surface mount camera included in the kit can be installed as a new reverse or rear camera for the vehicle, connected directly to the head unit's reverse camera input via the included 6-metre RCA cable with in-line reverse trigger wire. Can the included 720P AHD camera be used as a towing camera instead of a reverse camera? Yes. The included 720P AHD surface mount camera can be installed and configured as a front, rear, or reverse camera depending on the installation requirement, including as a towing camera mounted at the rear of the vehicle. It connects to either of the head unit's two AHD 720P-compatible camera inputs via the included 6-metre RCA cable with in-line reverse trigger wire. Can external amplifiers be connected to the AX8529K? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX8100K2 6.8" Multimedia Head Unit Upgrade Kit Mitsubishi Lancer A fully matched upgrade kit for the Mitsubishi Lancer (2013-2017), the AX8100K2 combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including a USB retention lead, reverse camera retention lead, and a 720P AHD surface mount camera, all in one box. Product Overview The AX8100K2 is Aerpro's complete head unit upgrade solution engineered for the Mitsubishi Lancer from 2013-2017. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Lancer dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, a steering wheel control interface, a USB retention lead, a reverse camera retention lead, and a universal SWC patch lead, ensuring factory steering wheel controls, factory USB input, and factory reverse camera are all retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Mitsubishi Lancer 2013-2017: The AX8100K2 includes all components required for a complete installation in the Mitsubishi Lancer from 2013-2017 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, SWC interface, USB retention lead, reverse camera retention lead, and patch lead requirements of the Lancer platform. Reverse Camera Retention Lead Included: The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. USB Retention Lead Included: The vehicle-specific installation kit includes a USB retention lead that connects the factory USB input point in the Lancer interior to the rear USB input of the new head unit, retaining the factory USB port functionality for media playback and device connection after installation. Black Fascia Kit for Lancer Dashboard Integration: The included black fascia kit is designed specifically for the Mitsubishi Lancer (2013-2017) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of this Lancer generation. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Mitsubishi Lancer 2013-2017. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the retained factory reverse camera and the included surface mount camera to be connected simultaneously, supporting configurations such as factory reverse and a front or additional camera. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Lancer interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX8100K2 Brand Aerpro Compatible Vehicles Mitsubishi Lancer, 2013-2017 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black USB Retention Lead Yes (included) OEM Reverse Camera Retention Yes (retention lead included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface USB Retention Lead Reverse Camera Retention Lead Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX8100K2 is engineered for the Mitsubishi Lancer from 2013-2017. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions How does the AX8100K2 differ from the AX9037K2 for the Mitsubishi Lancer? Both kits suit the Mitsubishi Lancer CJ and share the same head unit specification and 720P AHD surface mount camera. The AX9037K2 suits the Lancer from 2010-2013 and includes only a black fascia, SWC interface, and patch lead. The AX8100K2 suits the Lancer from 2013-2017 and includes a significantly more complete kit with an additional USB retention lead and reverse camera retention lead for the factory USB input and factory reverse camera found on these later Lancer models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm which kit is correct for your specific vehicle and build date. Does the AX8100K2 retain the factory Mitsubishi Lancer reverse camera? Yes. The vehicle-specific installation kit includes a reverse camera retention lead that connects the factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Does the AX8100K2 retain the factory Mitsubishi Lancer USB input? Yes. The vehicle-specific installation kit includes a USB retention lead that connects the factory USB input point in the Lancer interior to the rear USB input of the new head unit, retaining the factory USB port functionality for media playback and device connection after installation. Can the included 720P AHD camera be used alongside the retained factory reverse camera? Yes. The head unit provides two independent AHD 720P-compatible camera inputs. The factory reverse camera connects through the retention lead to one camera input, and the included 720P AHD surface mount camera can be connected to the second camera input for use as a front or additional camera, supporting dual camera configurations. Can external amplifiers be connected to the AX8100K2? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX9211K 6.8" Multimedia Head Unit Upgrade Kit Mitsubishi Outlander A fully matched upgrade kit for the Mitsubishi Outlander (2007-2010), the AX9211K combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit and a 720P AHD surface mount camera, all in one box. Product Overview The AX9211K is Aerpro's complete head unit upgrade solution engineered for the Mitsubishi Outlander from 2007-2010. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Outlander dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, a steering wheel control interface, and a universal SWC patch lead, ensuring factory steering wheel controls are retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Mitsubishi Outlander 2007-2010: The AX9211K includes all components required for a complete installation in the Mitsubishi Outlander from 2007-2010 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, steering wheel control interface, and patch lead requirements of the Outlander platform. Black Fascia Kit for Outlander Dashboard Integration: The included black fascia kit is designed specifically for the Mitsubishi Outlander (2007-2010) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of this Outlander generation. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Mitsubishi Outlander 2007-2010. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the included surface mount camera and a second camera to be connected simultaneously, supporting configurations such as front and reverse cameras. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Outlander interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX9211K Brand Aerpro Compatible Vehicles Mitsubishi Outlander, 2007-2010 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX9211K is engineered for the Mitsubishi Outlander from 2007-2010. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions Does the AX9211K retain the factory Mitsubishi Outlander steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Does the AX9211K include a reverse camera retention lead for the Outlander's factory reverse camera? No. The vehicle-specific installation kit for the AX9211K does not include a reverse camera retention lead. The 720P AHD surface mount camera included in the kit can be installed as a new reverse camera for the vehicle, connected directly to the head unit's reverse camera input via the included 6-metre RCA cable with in-line reverse trigger wire. What generation of Mitsubishi Outlander is the AX9211K compatible with? The AX9211K is engineered for the Mitsubishi Outlander from 2007-2010. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific build date and variant before purchase. Can the included 720P AHD camera be used as a front camera instead of a reverse camera? Yes. The included 720P AHD surface mount camera can be installed and configured as a front, rear, or reverse camera depending on the installation requirement. It connects to either of the head unit's two AHD 720P-compatible camera inputs via the included 6-metre RCA cable with in-line reverse trigger wire. If used as a front camera, the reverse trigger wire would not be connected and the camera would need to be activated through an alternative trigger or manual input method depending on the head unit's camera activation settings. Can external amplifiers be connected to the AX9211K? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX9212K 6.8" Multimedia Head Unit Upgrade Kit Mitsubishi Outlander A fully matched upgrade kit for the Mitsubishi Outlander (2010-2012), the AX9212K combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit and a 720P AHD surface mount camera, all in one box. Product Overview The AX9212K is Aerpro's complete head unit upgrade solution engineered for the Mitsubishi Outlander from 2010-2012. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Outlander dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, a steering wheel control interface, and a universal SWC patch lead, ensuring factory steering wheel controls are retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Mitsubishi Outlander 2010-2012: The AX9212K includes all components required for a complete installation in the Mitsubishi Outlander from 2010-2012 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, steering wheel control interface, and patch lead requirements of the Outlander platform. Black Fascia Kit for Outlander Dashboard Integration: The included black fascia kit is designed specifically for the Mitsubishi Outlander (2010-2012) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of this Outlander generation. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Mitsubishi Outlander 2010-2012. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the included surface mount camera and a second camera to be connected simultaneously, supporting configurations such as front and reverse cameras. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Outlander interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX9212K Brand Aerpro Compatible Vehicles Mitsubishi Outlander, 2010-2012 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX9212K is engineered for the Mitsubishi Outlander from 2010-2012. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions What is the difference between the AX9212K and the AX9211K? Both the AX9212K and AX9211K are complete head unit upgrade kits for the Mitsubishi Outlander ZG and ZH, sharing the same head unit specification, black fascia kit, SWC interface, and 720P AHD surface mount camera. The only difference is the vehicle date range: the AX9211K suits the Outlander from 2007-2010, while the AX9212K suits the Outlander from 2010-2012. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm which kit is correct for your specific vehicle and build date. Does the AX9212K retain the factory Mitsubishi Outlander steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Does the AX9212K include a reverse camera retention lead for the Outlander's factory reverse camera? No. The vehicle-specific installation kit for the AX9212K does not include a reverse camera retention lead. The 720P AHD surface mount camera included in the kit can be installed as a new reverse camera for the vehicle, connected directly to the head unit's reverse camera input via the included 6-metre RCA cable with in-line reverse trigger wire. Can the included 720P AHD camera be used as a front camera instead of a reverse camera? Yes. The included 720P AHD surface mount camera can be installed and configured as a front, rear, or reverse camera depending on the installation requirement. It connects to either of the head unit's two AHD 720P-compatible camera inputs via the included 6-metre RCA cable with in-line reverse trigger wire. If used as a front camera, the reverse trigger wire would not be connected and the camera would need to be activated through an alternative trigger or manual input method depending on the head unit's camera activation settings. Can external amplifiers be connected to the AX9212K? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX9100K6 6.8" Multimedia Head Unit Upgrade Kit Mitsubishi Pajero A fully matched upgrade kit for the Mitsubishi Pajero (2006-2014), the AX9100K6 combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including a reverse camera retention module and a 720P AHD surface mount camera, all in one box. Product Overview The AX9100K6 is Aerpro's complete head unit upgrade solution engineered for the Mitsubishi Pajero NS, NT, and NW from 2006-2014. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Pajero dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, a steering wheel control interface, a reverse camera retention module, and a universal SWC patch lead, ensuring factory steering wheel controls and the factory reverse camera are retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Mitsubishi Pajero NS NT NW 2006-2014: The AX9100K6 includes all components required for a complete installation in the Mitsubishi Pajero NS, NT, and NW from 2006-2014 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, SWC interface, reverse camera retention module, and patch lead requirements of the Pajero platform. Reverse Camera Retention Module Included: The vehicle-specific installation kit includes a reverse camera retention module that connects the Pajero's factory reverse camera to the new head unit's reverse camera input. The Mitsubishi Pajero NS, NT, and NW models use a specific reverse camera system that requires this dedicated module to interface correctly with the aftermarket head unit, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Black Fascia Kit for Pajero Dashboard Integration: The included black fascia kit is designed specifically for the Mitsubishi Pajero NS, NT, and NW (2006-2014) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of these Pajero generations. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Mitsubishi Pajero 2006-2014. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the retained factory reverse camera and the included surface mount camera to be connected simultaneously, supporting configurations such as factory reverse and a front or towing camera. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Pajero interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX9100K6 Brand Aerpro Compatible Vehicles Mitsubishi Pajero NS 2006-2014, Mitsubishi Pajero NT 2006-2014, Mitsubishi Pajero NW 2006-2014 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black OEM Reverse Camera Retention Yes (retention module included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface Reverse Camera Retention Module Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX9100K6 is engineered for the Mitsubishi Pajero NS, NT, and NW from 2006-2014. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions Does the AX9100K6 retain the factory Mitsubishi Pajero reverse camera? Yes. The vehicle-specific installation kit includes a reverse camera retention module that connects the Pajero's factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. This dedicated module is specific to the reverse camera system used in the Pajero NS, NT, and NW and is included within the kit. Does the AX9100K6 retain the factory Mitsubishi Pajero steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Is the AX9100K6 compatible with all Pajero NS, NT, and NW variants from 2006-2014? The AX9100K6 is specified for the Mitsubishi Pajero NS, NT, and NW from 2006-2014. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific variant and build date before purchase, as kit requirements can vary between variants within this production period. Can the included 720P AHD camera be used alongside the retained factory reverse camera? Yes. The head unit provides two independent AHD 720P-compatible camera inputs. The factory reverse camera connects through the retention module to one camera input, and the included 720P AHD surface mount camera can be connected to the second camera input for use as a front or towing camera, supporting dual camera configurations. Can external amplifiers be connected to the AX9100K6? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Aerpro AX9100K2 6.8" Multimedia Head Unit Upgrade Kit Mitsubishi Pajero A fully matched upgrade kit for the Mitsubishi Pajero (2012-2019), the AX9100K2 combines a 6.8" wireless CarPlay and Android Auto multimedia receiver with a vehicle-specific black fascia installation kit including a reverse camera retention module and a 720P AHD surface mount camera, all in one box. Product Overview The AX9100K2 is Aerpro's complete head unit upgrade solution engineered for the Mitsubishi Pajero NW and NX from 2012-2019. It is supplied as a three-component kit comprising the Aerpro 6.8" multimedia receiver, the vehicle-specific installation kit tailored to the Pajero dashboard profile, and a 720P AHD surface mount camera. No additional accessories need to be sourced for a standard installation. The vehicle-specific installation kit includes a black fascia kit, a steering wheel control interface, a reverse camera retention module, and a universal SWC patch lead, ensuring factory steering wheel controls and the factory reverse camera are retained after installation. The 6.8" capacitive touchscreen at 1024x600 resolution supports wireless and wired Apple CarPlay and Android Auto, Bluetooth V5 with HFP 1.6 HD Voice, A2DP audio streaming, AVRCP media control, and PBAP phonebook access. Both internal and external microphone options are provided, with the external microphone and mount included in the head unit box. Audio performance is delivered via 4 x 50W maximum output, a 13-band graphic EQ covering 32Hz through to 16kHz, time alignment, subwoofer low-pass filter control, and 4V 6-channel RCA preouts covering front, rear, and subwoofer channels for external amplifier integration. Dual rear USB inputs support CarPlay and Android Auto on USB 1 and media playback on USB 2, each at 5V/1.5A charging. Dual AHD 720P-compatible camera inputs accept the included surface mount camera and an additional second camera simultaneously. The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor with a 150-degree lens angle and is mountable as a front, rear, or reverse camera. It is supplied with 6 metres of RCA video cable with an in-line reverse trigger wire. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. Features & Benefits Complete Vehicle-Specific Upgrade Kit for Mitsubishi Pajero NW NX 2012-2019: The AX9100K2 includes all components required for a complete installation in the Mitsubishi Pajero NW and NX from 2012-2019 without additional accessory sourcing. The vehicle-specific installation kit covers the fascia, SWC interface, reverse camera retention module, and patch lead requirements of the Pajero platform. Reverse Camera Retention Module Included: The vehicle-specific installation kit includes a reverse camera retention module that connects the Pajero's factory reverse camera to the new head unit's reverse camera input. The Mitsubishi Pajero NW and NX models use a specific reverse camera system that requires this dedicated module to interface correctly with the aftermarket head unit, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. Black Fascia Kit for Pajero NW and NX Dashboard Integration: The included black fascia kit is designed specifically for the Mitsubishi Pajero NW and NX (2012-2019) dashboard profile, providing a clean, factory-fit finish around the 6.8" head unit that integrates with the interior trim of these Pajero generations. 6.8" Capacitive Touchscreen at 1024x600: The 6.8" capacitive touchscreen delivers a large, responsive display with 1024x600 resolution for clear navigation of maps, media, and settings, well suited to the dashboard opening of the Mitsubishi Pajero 2012-2019. Wireless and Wired Apple CarPlay and Android Auto: Both Apple CarPlay and Android Auto operate wirelessly for hands-free smartphone integration, or via wired USB connection for simultaneous charging. On first wireless connection, a one-time pairing via Bluetooth and Wi-Fi is required before subsequent connections become automatic. Bluetooth V5 with HFP 1.6 HD Voice: Bluetooth V5 supports A2DP high-quality audio streaming, AVRCP media control, PBAP phonebook access, and HFP 1.6 HD Voice quality hands-free calling. Both an internal microphone and an external microphone with mount are included, allowing the external microphone to be positioned optimally in the cabin. 13-Band Graphic EQ with Time Alignment: The 13-band EQ covers 32Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 10kHz, 12kHz, 14kHz, and 16kHz for precise acoustic tuning, complemented by time alignment and a subwoofer low-pass filter for a complete onboard tuning toolkit. 4V 6-Channel RCA Preouts: Six RCA preamp channels at 4V covering front, rear, and subwoofer outputs allow external amplifiers to be added to the system with a high-output, low-noise signal. Subwoofer level control is also provided directly from the head unit. 720P AHD Surface Mount Camera Included: The included 720P AHD surface mount camera uses a Sony 225 1/3" CMOS sensor, a 150-degree lens angle, optional parking guidelines, and an IP67 waterproof rating. It can be mounted as a front, rear, or reverse camera and connects to the head unit via the included 6-metre RCA cable with in-line reverse trigger wire. Dual AHD 720P Camera Inputs: Two independent AHD 720P-compatible camera inputs allow the retained factory reverse camera and the included surface mount camera to be connected simultaneously, supporting configurations such as factory reverse and a front or towing camera. 6-Colour Button Illumination: The key illumination is selectable across six colours including red, yellow, green, blue, purple, and white, allowing the button lighting to be matched to the Pajero interior. AM/FM Tuner with RDS: FM tuning covers 87.5-108.0MHz with 18 presets, and AM covers 522-1710kHz with 12 presets, with RDS support for station and track information display. Technical Specs Specification Detail SKU AX9100K2 Brand Aerpro Compatible Vehicles Mitsubishi Pajero NW 2012-2019, Mitsubishi Pajero NX 2012-2019 Display Size 6.8" Display Resolution 1024 x 600 Touchscreen Type Capacitive OS Linux DIN Size 2 DIN (Double DIN) Max Power (4 Ohm) 50W x 4 RCA Preamp Outputs 4V, 6-channel (Front / Rear / Subwoofer) Subwoofer Level Control Yes EQ 13-Band (32/63/125/250/500/1K/2K/4K/8K/10K/12K/14K/16KHz) EQ Presets 6 + 2 Custom Time Alignment Yes Low-Pass Filter (Sub) Yes Loudness Yes Smartphone Connectivity Wireless and Wired Apple CarPlay, Wireless and Wired Android Auto Bluetooth Version V5 Bluetooth Profiles A2DP, AVRCP, HFP, PBAP HFP Profile HFP 1.6 (HD Voice) Microphone Internal and External (included) ID3 Tag Display Yes USB 1 (Rear) CarPlay, Android Auto, Charging (5V/1.5A) USB 2 (Rear) Media Playback, Charging (5V/1.5A) USB Max Capacity FAT32, 32GB Media Playback Formats MP3, MP4, MKV, FLAC, Xvid Camera Input 1 Reverse Camera (720P AHD Compatible) Camera Input 2 Second Camera (720P AHD Compatible) Rear A/V Input Yes (RCA, 3 connectors) Composite Video Output Yes AM Tuner 522-1710kHz, 9kHz step, 12 presets FM Tuner 87.5-108.0MHz, 0.05MHz step, 18 presets RDS Yes Button Illumination 6-colour (Red, Yellow, Green, Blue, Purple, White) OSD Language English Camera Image Sensor Sony 225, 1/3" CMOS AHD Camera Lens Angle 150 degrees Camera Mount Type Surface Mount Camera Use Front, Rear, or Reverse Camera IP Rating IP67 Camera Cable Length 6 metres (RCA with in-line reverse trigger) Fascia Finish Black OEM Reverse Camera Retention Yes (retention module included) What's in the Box Aerpro 6.8" Multimedia Receiver: 1x 6.8" Multimedia Double DIN Head Unit Double DIN Metal Frame and Mounting Hardware Head Unit Plastic Trim Wiring Harness with ISO Connection 3 Wire Learning SWC Lead External Microphone with Mount GPS Antenna with Adhesive Pad QR Digital Manual Leaflet Vehicle Specific Installation Kit: Black Fascia Kit Steering Wheel Control Interface Reverse Camera Retention Module Universal Patch Lead 720P AHD Surface Mount Camera: 720P AHD Surface Mount Camera (wired) 6-Metre Video Cable (RCA) with In-Line Reverse Trigger Compatible With The AX9100K2 is engineered for the Mitsubishi Pajero NW and NX from 2012-2019. Head Unit Upgrade Kits can vary between vehicle models. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm compatibility with your specific vehicle before purchase. The 4V 6-channel RCA preouts are compatible with most aftermarket amplifiers requiring front, rear, and subwoofer signal inputs. The dual AHD 720P camera inputs are compatible with most aftermarket AHD 720P and standard composite cameras in addition to the included surface mount camera. Frequently Asked Questions What is the difference between the AX9100K2 and the AX9100K6? Both the AX9100K2 and AX9100K6 are complete head unit upgrade kits for the Mitsubishi Pajero, sharing the same head unit specification, black fascia, SWC interface, reverse camera retention module, and 720P AHD surface mount camera. The difference is the vehicle generation and date range: the AX9100K6 suits the Pajero NS, NT, and NW from 2006-2014, while the AX9100K2 suits the Pajero NW and NX from 2012-2019. Use the Aerpro What Fits Your Car Guide at aerpro.com to confirm which kit is correct for your specific vehicle and build date. Does the AX9100K2 retain the factory Mitsubishi Pajero reverse camera? Yes. The vehicle-specific installation kit includes a reverse camera retention module that connects the Pajero's factory reverse camera to the new head unit's reverse camera input, allowing the factory camera to continue displaying on the 6.8" screen when reverse gear is selected. This dedicated module is specific to the reverse camera system used in the Pajero NW and NX. Does the AX9100K2 retain the factory Mitsubishi Pajero steering wheel controls? Yes. The vehicle-specific installation kit includes a steering wheel control interface and a universal SWC patch lead that connects to the head unit's SWC input, allowing the factory steering wheel audio controls to operate with the new head unit after installation and calibration. Can the included 720P AHD camera be used alongside the retained factory reverse camera? Yes. The head unit provides two independent AHD 720P-compatible camera inputs. The factory reverse camera connects through the retention module to one camera input, and the included 720P AHD surface mount camera can be connected to the second camera input for use as a front or towing camera, supporting dual camera configurations. Can external amplifiers be connected to the AX9100K2? Yes. The head unit provides 4V 6-channel RCA preouts covering front, rear, and subwoofer channels, allowing external amplifiers to be connected for higher output power or a dedicated subwoofer channel. The 4V output voltage provides a strong, low-noise signal compatible with most aftermarket car audio amplifiers. Subwoofer level control is also available directly from the head unit for convenient bass adjustment without accessing the amplifier directly.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less