HELLA 2054BULK Front Marker Light Clear LED 9 to 33V - Pack of 4 ADR 49/00 compliant clear LED front position and outline marker lights in a pack of 4, featuring a curved compact design that reduces tie-down catching risk, IP67 fully sealed construction, acrylic lens, and 5-year warranty — purpose-built for trucks, trailers, and heavy commercial vehicles operating across 9–33V electrical systems. Product Overview The HELLA 2054BULK is a bulk pack of four clear LED front marker lights delivering ADR 49/00 compliant front position and outline lamp illumination for trucks, trailers, semi-trailers, and heavy commercial vehicles. Designed specifically as a front position and outline lamp, the 2054BULK produces a clear light output that satisfies the front marker and outline lighting requirements for heavy vehicles under Australian Design Rules. A standout feature of the 2054BULK is its newly designed curved and compact body profile, which reduces the risk of load tie-downs catching on the lamp during freight securing and loading operations — a practical safety improvement over traditional flat-sided marker lamps commonly encountered on trailer side rails and front panels. The compact 60 x 38 x 32mm surface mount footprint installs neatly onto trailer front panels, body rails, and curtainsider frames, while the curved profile provides increased protection against stone damage from road debris striking the front face of the lamp. Each light is fully sealed to IP67 against dust and water ingress and features an acrylic lens for increased chemical resistance against fuel, oil, cleaning agents, and road contaminants. Pre-wired with a 0.5m multi-core cable and featuring a 29mm centre-to-centre mounting distance, the 2054BULK installs cleanly and quickly for both new fit-outs and refurbishment of existing trailer and truck front lighting. HELLA's five-year warranty provides long-term confidence for fleet operators, trailer manufacturers, and transport companies. Universal 9–33V input ensures compatibility with both 12V light commercial vehicles and 24V heavy truck and trailer electrical systems in a single unit. Features & Benefits Curved Compact Design — Reduces Tie-Down Catching Risk — The newly designed curved body profile significantly reduces the risk of cargo tie-down straps and load binders catching on the lamp during freight securing, a common cause of marker lamp damage and dislodgement on trailer side rails and front panels. The curved profile also provides increased protection against stone strike damage. ADR 49/00 Compliant — Meets Australian Design Rule 49/00 for front and rear position lamps on heavy vehicles, confirming the 2054BULK is road-legal for front marker and outline lamp applications on trucks and trailers operating on Australian roads. Clear LED Light Output — Produces a clear front position and outline lamp illumination as required for front marker and outline lighting applications on heavy commercial vehicles, with maintenance-free LED technology for significantly longer service life than incandescent alternatives. Fully Sealed IP67 — Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the demanding front panel and side rail environments typical of heavy transport operation. Acrylic Lens Construction — Increased chemical resistance compared to standard plastic lenses, protecting against fuel spills, oil, cleaning agents, diesel exhaust residue, and road contaminants that degrade standard marker light lenses over time. Pre-Wired 0.5m Multi-Core Cable — Factory-fitted 0.5m cable eliminates the need for additional connectors at the light unit, simplifying installation onto trailer front panels and body rails for faster fit-out and refurbishment work. 9–33V Universal Input — Single light unit compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. Compact 60 x 38mm Surface Mount Profile — Low-profile surface mount design installs neatly onto trailer front panels and body rails without excessive protrusion, maintaining a clean vehicle profile while delivering compliant front marker illumination. HELLA 5-Year Warranty — Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2054BULK Pack Contents 4 lights (Clear) Voltage Input 9–33V Light Type LED Light Function Front Position / Outline Lamp Lens Material Acrylic Mount Type Surface Mount Mount Centre-to-Centre 29mm Connector Pre-Wired Cable Length 0.5m Multi-Core Ingress Protection IP67 Compliance ADR 49/00 Dimensions (L×W×D) 60 × 38 × 32mm Colour Clear Warranty Five Years Compatible With / Goes Well With The HELLA 2054BULK is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant clear LED front position and outline marker lighting. Primary applications include semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, livestock trailers, car carriers, and heavy plant transport trailers requiring front outline and position lamp compliance. Pairs well with the HELLA 2053BULK red/amber side marker light pack for a complete truck and trailer marker lighting solution, other HELLA truck and trailer lighting products for a matched lighting suite, LED rear combination lamps and reverse lights, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for clean and sealed wiring runs. Frequently Asked Questions What is the difference between the 2054BULK and the 2053BULK side marker pack? The 2054BULK is a clear front position and outline lamp compliant to ADR 49/00, specifically designed for front marker and outline lighting applications on trucks and trailers. The 2053BULK is a red/amber side marker light compliant to ADR 45/01 for side marking applications. The two packs complement each other — the 2054BULK covers front position and outline requirements while the 2053BULK covers side marking, making them a natural pairing for a complete heavy vehicle marker lighting fit-out. What does ADR 49/00 compliance mean for front marker lights? ADR 49/00 is the Australian Design Rule covering front and rear position lamps on heavy vehicles. Compliance confirms the 2054BULK meets the legal requirements for front position and outline lamp applications on trucks and trailers operating on Australian public roads, including prescribed light output, colour, and visibility angles. Fitting ADR-compliant lighting is a legal requirement for heavy vehicle roadworthiness in Australia. How does the curved design reduce tie-down catching risk? Traditional flat-sided marker lamps present a flat edge that cargo tie-down straps and load binders can catch and lever against during freight securing, potentially dislodging or damaging the lamp. The 2054BULK's curved body profile eliminates these flat catching edges, allowing straps to slide past the lamp rather than hooking on it. The curved profile also deflects stone strikes more effectively than a flat face, reducing the risk of lens damage from road debris. Can these front marker lights be used on both 12V and 24V vehicles? Yes. The 2054BULK operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single light unit works across both voltages without modification, making the bulk pack ideal for workshop and fleet use across mixed vehicle types. How is the 2054BULK installed — does it require additional wiring hardware? Each light comes pre-wired with a 0.5m multi-core cable, eliminating the need for connectors at the light unit itself. Installation requires drilling a mounting hole to the 29mm centre-to-centre spacing, securing with fasteners through the surface mount base, and joining the pre-wired cable into the vehicle or trailer wiring loom. Waterproof connectors, heat-shrink terminals, and rubber grommets are recommended for a fully sealed, professional installation on trailer panels and body rails.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2051BULK Front Marker Light Amber LED 9 to 33V 4 Pce ADR 49/00 compliant amber LED front position and outline marker lights in a pack of 4, featuring a stealth clear-until-illuminated lens, curved compact design that reduces tie-down catching risk, IP67 fully sealed construction, and 5-year warranty — purpose-built for trucks, trailers, and heavy commercial vehicles operating across 9–33V electrical systems. Product Overview The HELLA 2051BULK is a bulk pack of four amber LED front marker lights delivering ADR 49/00 compliant front position and outline lamp illumination for trucks, trailers, semi-trailers, and heavy commercial vehicles. A defining feature of the 2051BULK is its stealth optical design — the acrylic lens appears completely clear when unlit, only revealing its amber illumination when powered on. This provides a clean, unobtrusive appearance on the vehicle profile during daylight hours while delivering bright amber front position and outline lamp output when activated, a premium aesthetic commonly specified by fleet operators and trailer manufacturers seeking a polished finished appearance. Like the 2054BULK, the 2051BULK features HELLA's newly designed curved and compact body profile, which reduces the risk of cargo tie-down straps and load binders catching on the lamp during freight securing operations — a practical safety improvement over traditional flat-sided marker lamps. The curved profile simultaneously provides increased protection against stone damage from road debris. The compact 60 x 38 x 32mm surface mount footprint installs neatly onto trailer front panels, body rails, and curtainsider frames, with a 29mm centre-to-centre mounting distance for quick, consistent positioning. Each light is fully sealed to IP67 against dust and water ingress, and the acrylic lens delivers increased chemical resistance against fuel, oil, cleaning agents, and road contaminants. Pre-wired with a generous 2.5m multi-core cable, the 2051BULK provides ample cable length for routing through trailer body panels and front frame structures without requiring additional extension wiring. HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers. Universal 9–33V input ensures compatibility with both 12V and 24V vehicle electrical systems in a single unit. Features & Benefits Clear-Until-Illuminated Stealth Lens — The acrylic lens appears completely clear when unlit, giving the vehicle a clean and unobtrusive daytime profile. When powered, the lens produces bright amber front position and outline illumination — a premium stealth aesthetic widely specified for modern truck and trailer fit-outs. Curved Compact Design — Reduces Tie-Down Catching Risk — The newly designed curved body profile significantly reduces the risk of cargo tie-down straps and load binders catching on the lamp during freight securing, a common cause of marker lamp damage on trailer side rails and front panels. The curved profile also provides increased protection against stone strike damage. ADR 49/00 Compliant — Meets Australian Design Rule 49/00 for front and rear position lamps on heavy vehicles, confirming the 2051BULK is road-legal for front position and outline lamp applications on trucks and trailers operating on Australian roads. Amber LED Light Output — Produces bright amber front position and outline lamp illumination with maintenance-free LED technology, delivering a significantly longer operational lifespan than incandescent alternatives and reducing fleet downtime and replacement costs. Fully Sealed IP67 — Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the demanding front panel and side rail environments typical of heavy transport operation. Acrylic Lens Construction — Increased chemical resistance compared to standard plastic lenses, protecting against fuel spills, oil, cleaning agents, diesel exhaust residue, and road contaminants that degrade standard marker light lenses over time. Pre-Wired 2.5m Multi-Core Cable — Generous 2.5m factory-fitted cable provides ample length for routing through trailer body panels, front frame structures, and curtainsider rails without requiring extension wiring or additional connectors at the light unit. 9–33V Universal Input — Single light unit compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. Compact 60 x 38mm Surface Mount Profile — Low-profile surface mount design installs neatly onto trailer front panels and body rails without excessive protrusion, maintaining a clean vehicle profile while delivering compliant front marker illumination. HELLA 5-Year Warranty — Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2051BULK Pack Contents 4 lights (Amber) Voltage Input 9–33V Light Type LED Light Function Front Position / Outline Lamp Lens Appearance Clear (amber when illuminated) Lens Material Acrylic Mount Type Surface Mount Mount Centre-to-Centre 29mm Connector Pre-Wired Cable Length 2.5m Multi-Core Ingress Protection IP67 Compliance ADR 49/00 Dimensions (L×W×D) 60 × 38 × 32mm Colour Amber Warranty Five Years Compatible With / Goes Well With The HELLA 2051BULK is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant amber LED front position and outline marker lighting. Primary applications include semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, livestock trailers, car carriers, and heavy plant transport trailers requiring front outline and position lamp compliance. Pairs well with the HELLA 2053BULK red/amber side marker light pack and 2054BULK clear front marker pack for a complete matched HELLA truck and trailer marker lighting solution, LED rear combination lamps and reverse lights, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for clean and sealed wiring runs. Frequently Asked Questions What does "clear until illuminated" mean on the 2051BULK lens? The 2051BULK uses a stealth optical design where the acrylic lens appears completely clear and uncoloured during daylight when the light is off, giving the vehicle a clean and modern profile. When the light is powered on, the LED optics produce bright amber illumination through the clear lens. This design is popular with fleet operators and trailer manufacturers who want a polished, uncluttered vehicle appearance without sacrificing compliant amber marker light output when required. How does the 2051BULK differ from the 2054BULK clear front marker pack? Both packs share the same body dimensions, curved design, IP67 rating, ADR 49/00 compliance, mounting specifications, and 5-year warranty. The key differences are light output colour and cable length — the 2051BULK produces amber illumination through a clear-until-illuminated lens with a 2.5m cable, while the 2054BULK produces clear light output with a 0.5m cable. Choose the 2051BULK where amber front position lamp output is required, or the 2054BULK where clear outline lamp output is the application. What does ADR 49/00 compliance mean for front marker lights? ADR 49/00 is the Australian Design Rule covering front and rear position lamps on heavy vehicles. Compliance confirms the 2051BULK meets the legal requirements for front position and outline lamp applications on trucks and trailers operating on Australian public roads, including prescribed light output, colour, and visibility angles. Fitting ADR-compliant lighting is a legal requirement for heavy vehicle roadworthiness in Australia. Can these front marker lights be used on both 12V and 24V vehicles? Yes. The 2051BULK operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single light unit works across both voltages without modification, making the bulk pack ideal for workshop and fleet use across mixed vehicle types. How is the 2051BULK installed — does it require additional wiring hardware? Each light comes pre-wired with a 2.5m multi-core cable, eliminating the need for connectors at the light unit itself. The generous cable length accommodates routing through trailer body panels and front frame structures without extension wiring. Installation requires drilling a mounting hole to the 29mm centre-to-centre spacing, securing with fasteners through the surface mount base, and connecting the pre-wired cable into the vehicle or trailer wiring loom. Waterproof connectors, heat-shrink terminals, and rubber grommets are recommended for a fully sealed, professional installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2026BULK Cab Marker Light Amber LED 12 or 24V Pack of 4 ADR 6/00 Category 5 compliant amber LED cab marker lights in a pack of 4, featuring a stealth clear-until-illuminated lens, fully sealed IP67 construction, and 5-year warranty — purpose-built for trucks, semi-trailers, and heavy commercial vehicles requiring compliant cab and roof marker illumination across 8–28V electrical systems. Product Overview The HELLA 2026BULK is a bulk pack of four amber LED cab marker lights delivering ADR 6/00 Category 5 compliant cab and roof marker illumination for trucks, semi-trailers, and heavy commercial vehicles. Cab marker lights serve a distinct function from side and front marker lamps — mounted along the roofline or cab upper structure, they indicate the overall width and height profile of the vehicle to oncoming traffic and other road users, a legal requirement for heavy vehicles exceeding specific width thresholds under Australian road regulations. The 2026BULK features HELLA's stealth clear-until-illuminated optical design, where the lens appears completely clear and uncoloured when the light is off, only revealing its amber illumination when powered on. This provides a clean, modern cab appearance during daylight hours while delivering bright, compliant amber cab marker output when required — a premium aesthetic widely specified for new truck builds and fleet refurbishment projects. The compact 60 x 38 x 32mm surface mount body shares the same footprint as other HELLA marker lamps in the range, allowing consistent installation across multiple marker light applications on the same vehicle using uniform mounting hardware. Each light is fully sealed to IP67 against dust and moisture ingress, and the pre-wired connector simplifies wiring into the cab roof loom or upper body wiring circuit. HELLA's five-year warranty provides long-term confidence for fleet operators, truck manufacturers, and transport companies. Universal 8–28V input ensures compatibility with both 12V and 24V heavy vehicle electrical systems in a single unit. Features & Benefits Clear-Until-Illuminated Stealth Lens — The lens appears completely clear and uncoloured when the light is off, providing a clean and modern cab profile during daylight. When powered, the optics produce bright amber cab marker illumination — a premium stealth finish widely specified for modern truck builds and fleet refurbishments. ADR 6/00 Category 5 Compliant — Meets Australian Design Rule 6/00 Category 5 for direction indicator lamps and marker lamps on heavy vehicles, confirming the 2026BULK is road-legal for cab and roof marker applications on trucks and trailers operating on Australian roads. Amber LED Light Output — Delivers bright amber cab marker illumination with maintenance-free LED technology, providing a significantly longer operational lifespan than incandescent cab marker alternatives and reducing fleet maintenance and replacement costs. Fully Sealed IP67 — Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed roofline and upper cab environments subject to rain, road spray, and washdown. Pack of 4 — Bulk pack of four cab marker lights simplifies procurement for truck builds, fleet fit-outs, and trailer refurbishments requiring multiple units across the cab or roofline in a single purchase. Surface Mount Design — Compact surface mount installation fits cleanly onto cab rooflines, upper body panels, and trailer front structures without excessive protrusion, maintaining a streamlined vehicle profile. Pre-Wired Connector — Factory-fitted pre-wired connector eliminates the need for additional connectors at the light unit, simplifying connection into the cab roof wiring loom or upper body circuit. 8–28V Universal Input — Single light unit compatible with both 12V and 24V heavy vehicle electrical systems, covering the full range of truck and trailer electrical configurations without requiring separate voltage variants. HELLA 5-Year Warranty — Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, truck manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2026BULK Pack Contents 4 lights (Amber) Voltage Input 8–28V Light Type LED Light Style Cab Marker Light Lens Appearance Clear (amber when illuminated) Mount Type Surface Mount Mount Centre-to-Centre 29mm Connector Pre-Wired Ingress Protection IP67 Compliance ADR 6/00 Category 5 Dimensions (L×W×D) 60 × 38 × 32mm Colour Amber Warranty Five Years Compatible With / Goes Well With The HELLA 2026BULK is suited to any 12V or 24V truck, semi-trailer, or heavy commercial vehicle requiring ADR-compliant LED cab and roof marker lighting. Primary applications include prime movers and semi-trailers requiring roofline cab marker compliance, rigid trucks and bus bodies with upper cab marker requirements, curtainsider and refrigerated trailers with front cab or roof marker fitment, car carriers and high-deck trailers, livestock trailers and coach builders, and any heavy vehicle exceeding width thresholds that triggers a legal cab marker light requirement under Australian road rules. Pairs well with the HELLA 2051BULK amber front marker pack, 2053BULK red/amber side marker pack, and 2054BULK clear front marker pack for a complete matched HELLA truck and trailer marker lighting solution, LED rear combination lamps, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for sealed roofline wiring installations. Frequently Asked Questions What is the purpose of cab marker lights and when are they legally required? Cab marker lights are mounted along the upper roofline or cab structure of heavy vehicles to indicate the vehicle's overall width and height profile to oncoming traffic and other road users. Under Australian road regulations, vehicles exceeding certain width thresholds are legally required to fit cab or clearance marker lights. ADR 6/00 Category 5 compliance on the 2026BULK confirms it meets the prescribed requirements for this application. Consult the relevant state or territory heavy vehicle regulations to confirm the specific width and vehicle type thresholds applicable to your vehicle. What does "clear until illuminated" mean on the 2026BULK lens? The 2026BULK uses a stealth optical design where the lens appears completely clear and uncoloured when the light is off, giving the cab roofline a clean and modern appearance during daylight. When powered on, the LED optics produce bright amber cab marker illumination through the clear lens. This finish is popular with fleet operators and truck builders seeking a polished, uncluttered vehicle appearance without compromising compliant amber cab marker output. How does the 2026BULK differ from the HELLA 2051BULK front marker pack? Both packs share the same body dimensions, clear-until-illuminated amber LED output, IP67 rating, surface mount design, and 5-year warranty. The key difference is the compliance standard and intended application — the 2026BULK is ADR 6/00 Category 5 compliant for cab and roof marker lamp applications, while the 2051BULK is ADR 49/00 compliant for front position and outline lamp applications. Always select the appropriate part for the specific lighting function required to ensure ADR compliance for your vehicle type. Can these cab marker lights be used on both 12V and 24V vehicles? Yes. The 2026BULK operates across an 8–28V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single light unit works across both voltages without modification, making the bulk pack suitable for workshop and fleet use across mixed vehicle types. How many cab marker lights are typically required per vehicle? The number of cab marker lights required depends on the vehicle type, width, and applicable state or territory regulations. Most prime movers and wide-body trailers are commonly fitted with three to five cab marker lights evenly spaced across the roofline or cab upper structure. The 2026BULK pack of four provides a convenient quantity for standard installations, though additional packs may be required for larger configurations. Consult the applicable heavy vehicle standards or a qualified vehicle inspector to confirm the correct number and spacing for your specific vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2307BULK Rear Marker Light Red LED 9 to 33V Red LED rear position and marker light featuring a stealth clear-until-illuminated acrylic lens, fully sealed IP67 construction, nylon base, 2.5m pre-wired cable, and 5-year warranty — purpose-built for trucks, trailers, and heavy commercial vehicles requiring compliant rear marker illumination across 9–33V electrical systems. Product Overview The HELLA 2307BULK is a red LED rear marker light delivering rear position and marker lamp illumination for trucks, trailers, semi-trailers, and heavy commercial vehicles. Designed specifically as a rear position light, the 2307BULK produces red illumination through a stealth clear-until-illuminated acrylic lens — appearing completely clear and uncoloured when the light is off, and producing bright red rear marker output when powered on. This clean daytime appearance is a premium finish widely specified for modern truck builds, trailer fit-outs, and fleet refurbishment projects where a polished, uncluttered rear lighting profile is desired. The compact 60 x 38 x 32mm surface mount body is constructed with a nylon base for robust resistance against the knocks and impacts common in rear trailer and body panel environments, with the acrylic lens providing increased chemical resistance against fuel, cleaning agents, and road contaminants encountered in heavy transport operation. Fully sealed to IP67 against dust and moisture ingress, the 2307BULK is well suited to the exposed rear panel environments of trailers and truck bodies subject to rain, road spray, and pressure washdowns. Pre-wired with a generous 2.5m multi-core cable, the 2307BULK provides ample cable length for routing through trailer rear frames and body structures without requiring extension wiring. The 29mm centre-to-centre mounting distance is consistent with other HELLA marker lamps in the range, allowing uniform installation hardware across multiple marker light positions on the same vehicle. Universal 9–33V input ensures compatibility with both 12V and 24V vehicle electrical systems in a single unit, and HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers. Features & Benefits Clear-Until-Illuminated Stealth Lens — The acrylic lens appears completely clear and uncoloured when the light is off, providing a clean and modern rear panel profile during daylight. When powered, the LED optics produce bright red rear position and marker illumination — a premium stealth finish widely specified for modern truck and trailer builds. Red LED Rear Position Output — Delivers bright red rear marker and position lamp illumination with maintenance-free LED technology, providing a significantly longer operational lifespan than incandescent rear marker alternatives and reducing fleet downtime and replacement costs. Acrylic Lens Construction — Increased chemical resistance compared to standard plastic lenses, protecting against fuel spills, oil, cleaning agents, diesel exhaust residue, and road contaminants that degrade standard marker light lenses over time on heavy vehicle rear panels. Nylon Base Construction — Impact-resistant nylon base provides robust protection against the knocks and physical contact common in rear trailer and body panel environments, including loading bay and dock contact during reversing operations. Fully Sealed IP67 — Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed rear panel and body rail environments typical of heavy transport operation. Pre-Wired 2.5m Multi-Core Cable — Generous 2.5m factory-fitted cable provides ample length for routing through trailer rear frames and body structures without requiring extension wiring or additional connectors at the light unit. 9–33V Universal Input — Single light unit compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. Compact 60 x 38mm Surface Mount Profile — Low-profile surface mount design installs neatly onto trailer rear panels and body rails without excessive protrusion, maintaining a clean vehicle profile while delivering compliant rear marker illumination. HELLA 5-Year Warranty — Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2307BULK Voltage Input 9–33V Light Type LED Light Function Rear Position / Marker Light Lens Appearance Clear (red when illuminated) Lens Material Acrylic Base Material Nylon Mount Type Surface Mount Mount Centre-to-Centre 29mm Connector Pre-Wired Cable Length 2.5m Multi-Core Ingress Protection IP67 Dimensions (L×W×D) 60 × 38 × 32mm Colour Red Warranty Five Years Compatible With / Goes Well With The HELLA 2307BULK is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring red LED rear position and marker lighting. Primary applications include semi-trailers and B-trains requiring rear marker compliance, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, livestock trailers, car carriers, and heavy plant transport trailers requiring rear outline and position lamp fitment. Pairs well with the HELLA 2051BULK amber front marker pack, 2053BULK red/amber side marker pack, 2054BULK clear front marker pack, and 2026BULK amber cab marker pack for a complete matched HELLA truck and trailer marker lighting solution, LED rear combination lamps and reverse lights, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for sealed rear panel wiring installations. Frequently Asked Questions What does "clear until illuminated" mean on the 2307BULK lens? The 2307BULK uses a stealth optical design where the acrylic lens appears completely clear and uncoloured when the light is off, giving the rear panel a clean and modern daytime profile. When the light is powered on, the LED optics produce bright red rear position and marker illumination through the clear lens. This finish is popular with fleet operators and trailer builders seeking a polished, uncluttered rear appearance without compromising compliant red marker output. Why does the 2307BULK use a nylon base rather than a polycarbonate or metal base? Nylon offers a strong balance of impact resistance, chemical resistance, and lightweight construction well suited to rear trailer and body panel applications. The rear of trailers and truck bodies is frequently subject to physical contact during reversing, dock loading, and loading bay operations. A nylon base absorbs minor knocks and impacts more effectively than brittle materials, reducing the risk of cracking or shattering the mount under incidental contact. How does the 2307BULK differ from the red lights in the 2053BULK side marker pack? The 2307BULK is a dedicated rear position and marker light designed specifically for rear panel applications, featuring a clear-until-illuminated stealth lens, nylon base, and 2.5m cable suited to rear trailer frame routing. The red lights in the 2053BULK are side marker lights designed for side marking applications under ADR 45/01. Always select the correct part for the specific lighting function and mounting position to ensure compliance for your vehicle type. Can this rear marker light be used on both 12V and 24V trailers? Yes. The 2307BULK operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single light unit works across both voltages without modification, making it ideal for workshop and fleet use across mixed vehicle types. How is the 2307BULK installed — does it require additional wiring hardware? Each light comes pre-wired with a 2.5m multi-core cable, eliminating the need for connectors at the light unit itself. The generous cable length accommodates routing through trailer rear frames and body structures without extension wiring. Installation requires drilling a mounting hole to the 29mm centre-to-centre spacing, securing with fasteners through the surface mount base, and connecting the pre-wired cable into the trailer or vehicle rear wiring loom. Waterproof connectors, heat-shrink terminals, and rubber grommets are recommended for a fully sealed, professional installation on rear panels and body rails.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2378 12/24V LED Combo Lamp Slim Design Slim-profile LED combination lamp delivering stop, tail, and indicator functions in a single compact 222 x 96 x 25mm unit, with IP67/IP69K dual-rated protection, dual ADR compliance, horizontal and vertical mounting capability, and 5-year warranty for trucks, trailers, and heavy commercial vehicles on 12/24V systems. Product Overview The HELLA 2378 is a slim-design LED combination lamp integrating stop, tail, and indicator lighting functions into a single low-profile unit for trucks, trailers, and heavy commercial vehicles. At just 25mm deep, the 2378 is purpose-built for applications where mounting depth is restricted or a clean, low-protrusion rear lighting profile is required, including curtainsider trailers, refrigerated bodies, flat panel rear structures, and flush-mounted trailer lighting applications. The 2378 is dual ADR compliant, meeting ADR 49/00 for stop and tail lamp functions and ADR 6/00 Category 2 for the indicator function, confirming full road-legal compliance for rear combination lighting on heavy vehicles operating on Australian roads. IP67 and IP69K dual ingress protection ratings confirm the 2378 is both submersion resistant and capable of withstanding high-pressure washdowns, making it fully suited to the exposed rear panel environments of trailers and truck bodies subject to rain, road spray, and pressure cleaning. The shockproof construction provides additional resistance against the vibration and physical impacts common in heavy transport operation. Supplied with mounting bushes and pre-wired for straightforward installation, the 2378 can be mounted in both horizontal and vertical orientations to accommodate different trailer and body panel configurations. The 193mm centre-to-centre mounting distance and rectangular 222 x 96mm footprint suit standard rear panel and trailer tailgate mounting positions. Universal 12/24V input covers the full range of heavy truck and trailer electrical systems in a single unit, and HELLA's five-year warranty provides long-term confidence for fleet operators, trailer manufacturers, and transport companies. Features & Benefits Slim 25mm Profile: At just 25mm deep, the 2378 delivers full stop, tail, and indicator combination lamp functionality in one of the lowest-profile rear combination units available, ideal for flush mounting on curtainsider trailers, refrigerated bodies, and rear panels where mounting depth is restricted. Three Functions in One Unit: Combines stop, tail, and indicator functions into a single LED combination lamp, reducing the number of individual lights required on the rear panel, simplifying wiring, and providing a cleaner finished installation compared to fitting separate units for each function. Dual ADR Compliance: Meets ADR 49/00 for stop and tail lamp functions and ADR 6/00 Category 2 for the indicator function, confirming full road-legal compliance for rear combination lighting on heavy vehicles operating on Australian public roads. IP67 and IP69K Dual Rated: Full submersion protection combined with high-pressure washdown resistance provides the highest available ingress protection standard for rear combination lamps, ensuring reliable operation through rain, road spray, and pressure cleaning of trailer bodies and truck rear panels. Shockproof Construction: Built to withstand the vibration and physical shock typical of heavy transport operation, including rough road surfaces, loading dock impacts, and the sustained vibration of long-haul trucking without compromising LED connections or optical performance. Horizontal and Vertical Mounting: Supports both horizontal and vertical installation orientations, providing flexibility to suit a wide range of trailer body panel configurations, rear door frames, and flat panel mounting positions. Supplied with Mounting Bushes: Mounting bushes included in the box simplify installation and provide a secure, vibration-dampening fitment onto trailer rear panels and body frames without requiring additional hardware. Pre-Wired Connector: Factory-fitted pre-wired connector eliminates the need for additional connectors at the lamp unit, simplifying connection into the trailer or vehicle rear wiring loom. 12/24V Universal Input: Single lamp compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2378 Voltage Input 12/24V Light Type LED Light Functions Stop, Tail, Indicator Shape Rectangle Mount Type Surface Mount Mount Centre-to-Centre 193mm Mounting Orientation Horizontal and Vertical Connector Pre-Wired Ingress Protection IP67, IP69K Compliance (Stop/Tail) ADR 49/00 Compliance (Indicator) ADR 6/00 Category 2 Shockproof Yes Dimensions (L×W×D) 222 × 96 × 25mm Supplied With Mounting Bushes Warranty Five Years Compatible With / Goes Well With The HELLA 2378 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring a slim-profile ADR-compliant rear combination lamp. Primary applications include curtainsider and tautliner trailers with restricted rear panel depth, refrigerated and box body trailers with flush rear door frames, flatbed and drop-deck trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies with slim rear lighting requirements, car carriers, livestock trailers, and heavy plant transport trailers where a low-protrusion rear combination lamp is required. Pairs well with other HELLA truck and trailer lighting products including the 2051BULK amber front marker pack, 2053BULK red/amber side marker pack, 2054BULK clear front marker pack, 2026BULK cab marker pack, and 2307BULK rear marker light for a complete matched HELLA rear lighting solution. Also pairs well with reverse lamps and reverse alarms, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional rear lighting installations. Frequently Asked Questions What lighting functions does the HELLA 2378 provide in a single unit? The 2378 combines three rear lighting functions into a single slim unit: stop lamp, tail lamp, and indicator. This eliminates the need to fit separate individual lamps for each function on the rear panel, reducing wiring complexity and the number of mounting holes required while providing a cleaner, more integrated finished appearance on trailer and truck rear panels. What does dual ADR compliance mean on the 2378? The 2378 carries two separate ADR compliance certifications covering its different light functions. ADR 49/00 covers the stop and tail lamp functions, confirming they meet the legal output and visibility requirements for those functions on heavy vehicles. ADR 6/00 Category 2 covers the indicator function. Together, these confirm the 2378 is fully road-legal as a rear combination lamp on trucks and trailers operating on Australian public roads. Can the 2378 be mounted in both horizontal and vertical orientations? Yes. The 2378 supports both horizontal and vertical mounting orientations, providing flexibility to accommodate different trailer body panel layouts, rear door frame configurations, and flat panel mounting positions. Mounting bushes are supplied with the unit to assist with secure installation in either orientation. Confirm the intended orientation suits the ADR visibility angle requirements for the specific vehicle type and mounting position. What is the difference between IP67 and IP69K ratings on the 2378? IP67 certifies the lamp can withstand temporary water immersion up to 1 metre depth, while IP69K certifies protection against high-pressure, high-temperature water jets at close range. Carrying both ratings simultaneously confirms the 2378 is protected against both water submersion and the high-pressure washdowns commonly used to clean trailer bodies, refrigerated units, and truck rear panels in transport and agricultural operations. Is the 2378 suitable for replacing older incandescent combination lamps on existing trailers? Yes. The 2378 is well suited for retrofitting onto existing trailers and truck bodies as a direct upgrade from incandescent or older LED combination lamps, provided the rear panel has sufficient space to accommodate the 222 x 96mm footprint and the wiring can be adapted to the pre-wired connector. The 193mm centre-to-centre mounting distance should be confirmed against existing mounting holes before installation. A qualified auto electrician is recommended for retrofitting combination lamp wiring on heavy vehicles.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2VP015075001 DURALED COMBI-SR DT Connector Lamp Premium 5-function DuraLED rear combination lamp with DT connector termination, Grilamid lens, HCS technology, direction indicator failure control, reverse polarity protection, and IP67/IP69K dual-rated protection, backed by HELLA's lifetime warranty for trucks, trailers, and heavy commercial vehicles on 12–24V systems. Product Overview The HELLA 2VP015075001 DuraLED COMBI-SR DT Connector is the DT connector-terminated variant of HELLA's flagship DuraLED COMBI-SR slimline rear combination lamp series. Sharing the same premium specification as the pre-wired 2VP015074001, the key distinction of the 2VP015075001 is its DT connector termination in place of a factory-fitted pre-wired cable. This makes the 2VP015075001 the preferred choice for trailer applications already fitted with DT connector wiring looms, new trailer builds specifying DT connector harness standards, and workshop environments where a direct plug-in connection to an existing DT loom is required without modification or splicing. Delivering five rear lighting functions including rear combination and night light lamp functions in a single compact 223 x 96 x 26mm horizontal surface mount unit, the COMBI-SR DT maintains the full premium specification of the DuraLED series throughout. The Grilamid polyamide lens delivers superior UV resistance, impact resistance, and chemical resistance compared to standard acrylic or polycarbonate lenses, maintaining optical clarity over extended service life in demanding transport environments. HELLA's HCS (High Contrast Styling) technology delivers wide-angle visibility with a distinctive high-contrast LED optical design that maximises conspicuity to following drivers and road users. Built-in direction indicator failure control monitors the indicator circuit and signals faults to the driver or operator, while reverse polarity protection safeguards the lamp electronics against incorrect wiring connections. IP67 and IP69K dual ingress protection confirm full submersion resistance and high-pressure washdown capability. Rated at 14.5W total power consumption, the COMBI-SR DT provides efficient low-draw operation, and Multivolt compatibility covers both 12V and 24V DC systems in a single unit. HELLA's lifetime warranty reflects the premium build standard of the DuraLED series and provides the highest level of long-term product confidence available in the HELLA trailer lighting range. Features & Benefits DT Connector Termination: Fitted with a DT-style connector in place of a pre-wired cable, making the 2VP015075001 a direct plug-in solution for trailers and vehicles already wired with DT connector looms. Eliminates the need for splicing or cable modification when fitting to DT-standard trailer wiring harnesses. 5 Rear Lighting Functions in One Unit: Integrates five rear lighting functions including rear combination and night light lamp functions into a single slim 26mm deep unit, reducing the number of individual lamps required, simplifying rear panel wiring, and delivering a clean professional installation on trailer and truck rear panels. HELLA Lifetime Warranty: The DuraLED COMBI-SR DT carries HELLA's lifetime warranty, providing the highest level of long-term product confidence available in the HELLA truck and trailer lighting range and reflecting the premium build quality and expected service life of the DuraLED series. Grilamid Lens: The Grilamid polyamide lens delivers superior UV resistance, impact resistance, and chemical resistance compared to standard acrylic or polycarbonate lenses, maintaining optical clarity and physical integrity over extended service life in harsh transport environments. HCS Technology for Wide Visibility: HELLA's High Contrast Styling LED optics deliver wide-angle visibility with a distinctive high-contrast light signature, maximising the conspicuity of the rear combination lamp to following drivers and road users across a wide horizontal visibility angle. Direction Indicator Failure Control: Built-in indicator failure monitoring detects circuit faults in the indicator function and provides a warning signal, enabling fleet operators and drivers to identify indicator failures promptly rather than discovering them during roadside inspections or compliance checks. Reverse Polarity Protection: Electronic protection against reverse polarity wiring connections safeguards the lamp's LED driver and electronics against damage from incorrect installation or maintenance wiring, reducing the risk of costly lamp failure from wiring errors on trailer electrical systems. IP67 and IP69K Dual Rated: Full submersion protection combined with high-pressure, high-temperature washdown resistance provides the highest available ingress protection standard, ensuring reliable operation through rain, road spray, and pressure cleaning of trailer bodies and truck rear panels. Slimline 26mm Depth: Low-profile 26mm deep body suits applications where rear panel mounting depth is restricted, including curtainsider trailers, refrigerated bodies, and flush-mounted rear lighting configurations. Multivolt 12/24V DC Compatibility: A single unit covers both 12V and 24V DC electrical systems without requiring separate voltage variants, making the COMBI-SR DT suitable for mixed fleet applications and simplifying parts procurement. 14.5W Low Power Consumption: Efficient LED operation at 14.5W total draw reduces the electrical load on trailer wiring and connectors compared to equivalent incandescent combination lamps, contributing to lower operating temperatures and reduced strain on trailer electrical circuits. Horizontal Surface Mount: Designed specifically for horizontal surface mounting with a 193mm centre-to-centre fixing distance, compatible with standard trailer rear panel and body frame mounting positions. Technical Specs Specification Detail Part Number 2VP015075001 Voltage Input 12–24V DC (Multivolt) Light Type LED Light Design DuraLED, HCS Technology Number of Functions 5 Power Consumption 14.5W Lens Material Grilamid Fastening Type Horizontal Surface Mount Mount Centre-to-Centre 193mm Connector DT Connector Ingress Protection IP67, IP69K Indicator Failure Control Yes Reverse Polarity Protection Yes Dimensions (L×W×H) 223 × 26 × 96mm Warranty Lifetime Compatible With / Goes Well With The HELLA 2VP015075001 COMBI-SR DT is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring a premium slim-profile rear combination lamp with DT connector termination. Primary applications include new trailer builds specifying DT connector wiring harness standards, curtainsider and tautliner trailers with existing DT loom installations, refrigerated and box body trailers with flush rear door frames, flatbed and drop-deck trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, car carriers, livestock trailers, and long-haul semi-trailer fleets where DT connector standards are fleet specification requirements. Pairs well with DT connector trailer wiring looms and harnesses for direct plug-in installation, other HELLA DuraLED series lamps for a fully matched premium rear lighting suite, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK for a complete HELLA trailer lighting solution, reverse lamps and reverse alarms, and waterproof DT connector accessories and trailer junction boxes. Frequently Asked Questions What is the difference between the 2VP015075001 DT Connector and the 2VP015074001 pre-wired variant? Both lamps share identical dimensions, light functions, Grilamid lens, HCS technology, IP67/IP69K rating, indicator failure control, reverse polarity protection, power consumption, and lifetime warranty. The sole difference is the wiring termination: the 2VP015075001 uses a DT connector for direct plug-in connection to DT-standard trailer wiring looms, while the 2VP015074001 is pre-wired with 2.5m of sheathed multi-core cable. Choose the DT connector variant for trailers already fitted with DT loom connections, and the pre-wired variant where direct cable integration into the wiring circuit is preferred. What are the five lighting functions provided by the COMBI-SR DT? The 2VP015075001 COMBI-SR DT delivers five rear lighting functions in a single unit, covering rear combination and night light lamp functions. The exact function breakdown includes stop, tail, indicator, and night light functions integrated into the DuraLED COMBI-SR design. Refer to the HELLA product data sheet or contact your HELLA supplier for the full confirmed function list specific to this part number. What is Grilamid and why is it used for the lens material? Grilamid is a high-performance polyamide material developed for demanding optical and structural applications. Compared to standard acrylic or polycarbonate lenses, Grilamid offers superior resistance to UV degradation, ensuring the lens maintains optical clarity without yellowing or hazing over extended service life in outdoor environments. It also provides excellent impact resistance and chemical resistance against cleaning agents, fuels, and road contaminants common in heavy transport applications. What does direction indicator failure control do on the COMBI-SR DT? The built-in direction indicator failure control continuously monitors the indicator circuit and provides a warning signal to the driver or fleet operator if an indicator function fault is detected. This is particularly valuable for trailer combinations and fleet vehicles where individual lamp failures can go unnoticed during daily operation and are only discovered at roadside inspections or compliance checks, helping avoid infringement notices and improving road safety. Can the COMBI-SR DT be used to replace an existing combination lamp on a trailer? Yes, provided the trailer's rear panel accommodates the 223 x 96mm footprint, the 193mm centre-to-centre mounting distance aligns with existing fixings, and the trailer wiring loom uses a compatible DT connector standard for direct plug-in connection. If the existing trailer wiring is not DT connector terminated, the pre-wired 2VP015074001 variant may be a more suitable retrofit option. A qualified auto electrician is recommended for retrofitting combination lamp wiring on heavy vehicles to ensure correct function connections and compliance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2430 Rear Triple Jumbo-S LED Combination Lamp - Twin Stop/Tail & Indicator 12V/24V Large-format 597mm Triple Jumbo-S LED rear combination lamp delivering twin stop/tail and indicator functions in a single pre-assembled unit, with high-impact acrylic lens, shockproof sealed construction, horizontal and vertical mounting capability, and 5-year warranty for trucks, trailers, and heavy commercial vehicles on 12/24V systems. Product Overview The HELLA 2430 is a large-format rear combination lamp from HELLA's Jumbo-S series, delivering high-visibility twin stop/tail and indicator rear lighting across a substantial 597 x 133 x 59mm footprint suited to the rear panels of trucks, semi-trailers, curtainsider trailers, and heavy commercial vehicle bodies requiring maximum rear light presence and conspicuity. The Triple Jumbo-S designation reflects the extended three-module housing that accommodates twin stop/tail and indicator functions across the full 597mm lamp length, providing a wide rear lighting signature that is highly visible to following drivers even in adverse weather and low-visibility conditions. A key installation advantage of the 2430 is its pre-assembled and pre-wired modular construction — all LED modules are factory-assembled and wired into the housing, allowing the complete unit to be installed and connected as a single assembly without the need to wire individual modules or manage multiple connectors in the field. The high-impact acrylic lens provides robust resistance against stone strikes, debris, and physical knocks common in rear trailer environments, while the shockproof and fully sealed construction withstands both water submersion and high-pressure washing without compromising LED performance or ingress integrity. Both horizontal and vertical mounting orientations are supported, providing flexibility to suit different rear panel configurations, trailer door frames, and body rail layouts. The 497mm centre-to-centre mounting distance is suited to standard large-format rear panel mounting positions on semi-trailers and rigid truck bodies. Universal 12/24V input covers the full range of heavy truck and trailer electrical systems in a single unit, and HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers. Features & Benefits Large 597mm Triple Jumbo-S Format: The extended three-module 597mm housing delivers a wide, high-visibility rear lighting signature across the full rear panel width, maximising conspicuity to following drivers and road users in all weather and visibility conditions. Twin Stop/Tail and Indicator Functions: Integrates twin stop/tail lamp functions alongside an indicator in a single pre-assembled unit, consolidating multiple rear lighting requirements into one large-format lamp and simplifying rear panel wiring compared to fitting separate individual units. Pre-Assembled and Pre-Wired Modules: All LED modules are factory-assembled and pre-wired into the housing, allowing the complete unit to be installed and connected as a single assembly. This eliminates field wiring of individual modules and significantly reduces installation time on trailer builds and refurbishments. High-Impact Acrylic Lens: The high-impact acrylic lens provides robust resistance against stone strikes, road debris, and physical knocks common in rear trailer and truck body environments, maintaining optical integrity and physical protection over extended service life. Shockproof and Fully Sealed Construction: Built to withstand the vibration, shock, water submersion, and high-pressure washing typical of heavy transport operation, ensuring reliable long-term performance in the exposed rear panel environment of trailers and truck bodies. Horizontal and Vertical Mounting: Supports both horizontal and vertical installation orientations, providing flexibility to suit a wide range of trailer body panel configurations, rear door frames, and body rail layouts. LED Light Technology: Maintenance-free LED modules deliver a significantly longer operational lifespan than incandescent combination lamp alternatives, reducing fleet downtime, replacement costs, and the maintenance burden of large trailer fleet lighting management. 12/24V Universal Input: Single unit compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2430 Voltage Input 12/24V Light Type LED Light Style Stop / Tail / Indicator Light Functions Twin Stop/Tail, Indicator Lens Material High-Impact Acrylic Mount Centre-to-Centre 497mm Mounting Orientation Horizontal and Vertical Construction Shockproof, Fully Sealed Dimensions (L×W×H) 597 × 59 × 133mm Warranty Five Years Compatible With / Goes Well With The HELLA 2430 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring a large-format ADR-compatible rear combination lamp with maximum rear panel presence. Primary applications include semi-trailers and B-trains requiring wide rear lighting coverage, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers with large rear door frames, tipper bodies and tipping trailers, rigid trucks and bus bodies requiring a prominent rear lighting signature, car carriers, livestock trailers, and heavy plant transport trailers. Pairs well with other HELLA Jumbo-S series combination lamps for matched rear lighting suites on large trailers, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK for a complete HELLA truck and trailer lighting solution, reverse lamps and reverse alarms, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional rear lighting installations. Frequently Asked Questions What does "Triple Jumbo-S" mean in the product name? The Triple Jumbo-S designation refers to the extended three-module housing format in HELLA's Jumbo-S rear combination lamp series. The three-module configuration accommodates twin stop/tail and indicator functions across the full 597mm lamp length, creating a wide rear lighting signature. The Jumbo-S series is designed for trucks, semi-trailers, and heavy commercial vehicles requiring a large-format rear combination lamp with maximum rear panel presence and conspicuity. What does "twin stop/tail" mean on the 2430? Twin stop/tail refers to the 2430 incorporating two separate stop/tail lamp modules within the single housing, rather than a single stop/tail function. This provides a wider, more prominent stop and tail light signature across the rear panel, improving visibility to following drivers particularly during braking. The dual stop/tail configuration is commonly specified on large semi-trailers and heavy commercial vehicles where maximum rear conspicuity is a safety and compliance priority. Why are the LED modules pre-assembled and pre-wired into the housing? Pre-assembling and pre-wiring all LED modules into the housing during manufacture eliminates the need for field wiring of individual modules during installation. The complete unit can be mounted and connected as a single assembly, significantly reducing installation time on trailer builds and refurbishments compared to fitting and wiring individual lamp modules separately. This also reduces the risk of wiring errors during installation and ensures all module connections are factory-tested before leaving the production line. Can the 2430 be mounted in both horizontal and vertical orientations? Yes. The 2430 supports both horizontal and vertical mounting orientations, providing flexibility to suit different trailer body panel layouts, rear door frame configurations, and body rail mounting positions. Confirm the intended orientation suits the applicable ADR visibility angle requirements for the specific vehicle type and mounting position before installation. Is the 2430 suitable for retrofitting onto an existing trailer? Yes. The 2430 is well suited for retrofitting onto existing trailers as an upgrade from older incandescent or smaller combination lamp configurations, provided the rear panel has sufficient space to accommodate the 597 x 133mm footprint and the 497mm centre-to-centre mounting distance can be matched to existing or new fixing positions. A qualified auto electrician is recommended for retrofitting combination lamp wiring on heavy vehicles to ensure correct function connections and compliance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2431 Rear Triple Jumbo-S LED Combination Lamp - Stop/Tail/Indicator/Reverse 12V/24V Large-format 597mm Triple Jumbo-S LED rear combination lamp delivering stop, tail, indicator, and reverse functions with integrated 24cm² red retro reflectors, IP69K sealed construction, full ADR compliance across four separate standards, and 5-year warranty for trucks, trailers, and heavy commercial vehicles on 12–24V systems. Product Overview The HELLA 2431 is a large-format rear combination lamp from HELLA's Jumbo-S series, stepping up from the 2430 to add a reverse lamp function and integrated 24cm² red retro reflectors alongside the stop, tail, and indicator functions. Delivering four fully ADR-compliant rear lighting functions plus reflector compliance across a substantial 597 x 133 x 59mm footprint, the 2431 is the more comprehensive rear lighting solution in the Jumbo-S range, suited to semi-trailers, curtainsider trailers, and heavy commercial vehicle bodies where a single large-format unit covering all primary rear lighting and reflector requirements is preferred. The 2431 carries compliance across four separate Australian Design Rules: ADR 49/00 for stop and tail functions, ADR 6/00 Category 2a for the indicator, ADR 1/00 for the reverse lamp, and ADR 47/00 for the integrated 24cm² red retro reflectors. This multi-ADR compliance makes the 2431 a comprehensive single-unit solution for rear lighting compliance on heavy vehicles without requiring separate reflector fitment. Current draw is clearly specified across all functions: 0.8A stop, 0.08A tail, 0.5A indicator, and 0.4A reverse, providing precise electrical load data for trailer wiring and circuit protection calculations. All LED modules are factory-assembled and pre-wired into the housing, allowing the complete unit to be installed and connected as a single assembly without field wiring of individual modules. The high-impact acrylic lens provides robust resistance against stone strikes and road debris, while the IP69K sealed, shockproof construction withstands water submersion and high-pressure washing. Both horizontal and vertical mounting orientations are supported, and the 497mm centre-to-centre mounting distance suits standard large-format rear panel mounting positions. Universal 12–24V input covers the full range of heavy truck and trailer electrical systems, and HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers. Features & Benefits Four Functions Plus Integrated Reflectors: Combines stop, tail, indicator, and reverse lamp functions with integrated 24cm² red retro reflectors in a single large-format unit, providing comprehensive rear lighting and reflector compliance without requiring separate reflector fitment on the rear panel. Full Multi-ADR Compliance: Meets ADR 49/00 for stop and tail, ADR 6/00 Category 2a for the indicator, ADR 1/00 for the reverse lamp, and ADR 47/00 for the retro reflectors, confirming complete road-legal compliance across all four rear lighting and reflector functions for heavy vehicles on Australian roads. Large 597mm Triple Jumbo-S Format: The extended three-module 597mm housing delivers a wide, high-visibility rear lighting signature across the full rear panel width, maximising conspicuity to following drivers and road users in all weather and visibility conditions. Specified Current Draw Per Function: Current draw is defined for each function at 0.8A stop, 0.08A tail, 0.5A indicator, and 0.4A reverse, providing precise electrical load data for accurate trailer wiring calculations, circuit protection sizing, and load assessments on trailer electrical systems. Pre-Assembled and Pre-Wired Modules: All LED modules are factory-assembled and pre-wired into the housing, allowing the complete unit to be installed and connected as a single assembly. This eliminates field wiring of individual modules and significantly reduces installation time on trailer builds and refurbishments. IP69K Sealed Construction: Rated to IP69K, confirming protection against high-pressure, high-temperature water jets, making the 2431 fully suited to the exposed rear panel environments of trailers and truck bodies subject to pressure washing and harsh operational conditions. Shockproof Build: Built to withstand the vibration and physical shock typical of heavy transport operation, including rough road surfaces, loading dock impacts, and the sustained vibration of long-haul trucking without compromising LED performance or optical integrity. High-Impact Acrylic Lens: Provides robust resistance against stone strikes, road debris, and physical knocks common in rear trailer and truck body environments, maintaining optical integrity and physical protection over extended service life. Horizontal and Vertical Mounting: Supports both horizontal and vertical installation orientations, providing flexibility to suit a wide range of trailer body panel configurations, rear door frames, and body rail layouts. Pre-Wired Connector: Factory-fitted pre-wired connector eliminates the need for additional connectors at the lamp unit, simplifying connection into the trailer or vehicle rear wiring loom. 12–24V Universal Input: Single unit compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2431 Voltage Input 12–24V Light Type LED Light Style Stop / Tail / Indicator / Reverse Current Draw (Stop) 0.8A Current Draw (Tail) 0.08A Current Draw (Indicator) 0.5A Current Draw (Reverse) 0.4A Reflector 24cm² Red Retro Reflector Lens Material High-Impact Acrylic Mount Type Surface Mount Mount Centre-to-Centre 497mm Mounting Orientation Horizontal and Vertical Connector Pre-Wired Ingress Protection IP69K Compliance (Stop/Tail) ADR 49/00 Compliance (Indicator) ADR 6/00 Category 2a Compliance (Reverse) ADR 1/00 Compliance (Reflector) ADR 47/00 Dimensions (L×W×H) 597 × 133 × 59mm Warranty Five Years Compatible With / Goes Well With The HELLA 2431 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring a large-format fully ADR-compliant rear combination lamp with reverse and reflector functions included. Primary applications include semi-trailers and B-trains requiring comprehensive rear lighting and reflector compliance in a single unit, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers with large rear door frames, tipper bodies and tipping trailers, rigid trucks and bus bodies, car carriers, livestock trailers, and heavy plant transport trailers. Pairs well with the HELLA 2430 Twin Stop/Tail and Indicator lamp for matched Jumbo-S series installations where separate units are specified per side, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK for a complete HELLA truck and trailer lighting solution, reverse alarms and cameras for comprehensive reversing safety, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional rear lighting installations. Frequently Asked Questions How does the 2431 differ from the HELLA 2430 Triple Jumbo-S lamp? Both lamps share the same 597mm Triple Jumbo-S housing, high-impact acrylic lens, shockproof sealed construction, horizontal and vertical mounting, and 12/24V compatibility. The 2431 adds a reverse lamp function and integrated 24cm² red retro reflectors not present on the 2430, and carries a broader ADR compliance set covering four standards versus the 2430's stop/tail and indicator functions. The 2431 is the more comprehensive single-unit solution where reverse lamp and reflector compliance are required from a single fitting. What ADR standards does the 2431 comply with? The 2431 carries compliance across four Australian Design Rules: ADR 49/00 covers the stop and tail lamp functions, ADR 6/00 Category 2a covers the indicator, ADR 1/00 covers the reverse lamp, and ADR 47/00 covers the integrated 24cm² red retro reflectors. This multi-ADR compliance confirms the 2431 meets the legal requirements for all four rear lighting and reflector functions on heavy vehicles operating on Australian public roads. What are the current draw figures for each function and why do they matter? The 2431 draws 0.8A on the stop function, 0.08A on the tail, 0.5A on the indicator, and 0.4A on the reverse lamp. These specified current draw figures are important for accurately sizing trailer wiring conductors, selecting appropriate fuse or circuit breaker ratings, and calculating total electrical load across the trailer lighting circuit. Precise current data is particularly valuable for trailer builders, auto electricians, and fleet engineers specifying new trailer builds or refurbishments. What does IP69K mean for this combination lamp? IP69K certifies protection against high-pressure, high-temperature water jets directed at the lamp from any angle, typically at 80°C and 80–100 bar pressure at close range. This is the most demanding ingress protection standard for water exposure and confirms the 2431 can withstand the high-pressure washdowns commonly used to clean trailer bodies, refrigerated units, and truck rear panels in transport and agricultural operations without compromising sealed integrity or LED performance. Is the 2431 suitable for retrofitting onto an existing trailer? Yes. The 2431 is well suited for retrofitting onto existing trailers as an upgrade from older incandescent or smaller combination lamp configurations, provided the rear panel has sufficient space to accommodate the 597 x 133mm footprint and the 497mm centre-to-centre mounting distance can be matched to existing or new fixing positions. The integrated reflectors eliminate the need for separate reflector fitment when upgrading. A qualified auto electrician is recommended for retrofitting combination lamp wiring on heavy vehicles to ensure correct function connections and ADR compliance.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2146-H24 Rear Indicator Module LED 9 to 33V 24-LED Multivolt rear indicator module with Ultra Wide Visibility Optics, IP67 sealed construction, ADR 6/00 Category 2a compliance, and 6W efficient operation, purpose-built to upgrade existing surface mount Jumbo or Designline combination lamps to LED technology across 9–33V electrical systems. Product Overview The HELLA 2146-H24 is a dedicated LED rear indicator module designed specifically to upgrade existing surface mount Jumbo or Designline series combination lamps from incandescent to LED technology without replacing the entire lamp housing. This makes the 2146-H24 a highly cost-effective and practical solution for fleet operators and transport companies managing large trailer inventories fitted with existing HELLA Jumbo or Designline housings, allowing a targeted LED upgrade of the indicator function while retaining the existing lamp body and mounting arrangement. The 24 high-performance LEDs are arranged with HELLA's UWVO (Ultra Wide Visibility Optics) technology, delivering improved side visibility beyond the standard forward-facing visibility cone of conventional indicator modules. UWVO optics increase the horizontal visibility angle of the indicator, making the 2146-H24 more visible to adjacent traffic, pedestrians, and road users approaching from the side, improving active safety during lane changes and turning manoeuvres on heavy vehicles. ADR 6/00 Category 2a compliance confirms the module meets the legal requirements for rear indicator lamp functions on heavy vehicles operating on Australian public roads. At just 6W power consumption, the 2146-H24 operates at a fraction of the draw of equivalent incandescent indicator lamps, reducing the electrical load on trailer circuits and extending the life of trailer wiring and connectors. The Multivolt 9–33V input range covers standard 12V and 24V heavy vehicle electrical systems in a single module without requiring voltage-specific variants. Fully sealed to IP67 against dust and moisture ingress, the module is pre-wired with 200mm of cable for connection into the existing lamp housing wiring, and the 195 x 125 x 35mm surface mount footprint is engineered to fit directly into compatible Jumbo and Designline lamp housings. HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers specifying this LED upgrade module. Features & Benefits Purpose-Built LED Upgrade Module: Designed specifically to replace incandescent indicator modules in existing HELLA Jumbo and Designline surface mount combination lamp housings, enabling a targeted LED upgrade of the indicator function without replacing the entire lamp assembly and associated mounting hardware. 24 High-Performance LEDs: Twenty-four individual high-performance LEDs deliver bright, consistent amber indicator illumination with maintenance-free LED technology, providing a significantly longer operational lifespan than the incandescent modules they replace. UWVO Ultra Wide Visibility Optics: HELLA's Ultra Wide Visibility Optics technology extends the horizontal visibility angle of the indicator beyond the standard forward-facing cone, improving side visibility to adjacent traffic, pedestrians, and road users approaching from the side during lane changes and turning manoeuvres. ADR 6/00 Category 2a Compliant: Meets Australian Design Rule 6/00 Category 2a for rear indicator lamps on heavy vehicles, confirming the 2146-H24 is road-legal as a rear indicator function module on trucks and trailers operating on Australian public roads. 6W Efficient Operation: At just 6W power consumption, the 2146-H24 draws significantly less current than equivalent incandescent indicator modules, reducing the electrical load on trailer circuits and minimising heat generation in the lamp housing. Multivolt 9–33V Input: Covers the full range of 12V and 24V heavy vehicle electrical systems in a single module without requiring voltage-specific variants, simplifying procurement for mixed fleet and workshop environments. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the demanding rear panel environments typical of heavy transport operation. Pre-Wired 200mm Cable: Factory-fitted 200mm cable provides a short, neat wiring connection into the existing lamp housing wiring circuit, suited to the close-proximity wiring arrangement within a combination lamp body. Surface Mount Fitment: The 195 x 125 x 35mm surface mount footprint is engineered to fit directly into compatible HELLA Jumbo and Designline combination lamp housings for a straightforward drop-in upgrade installation. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality LED upgrade modules for extended service life. Technical Specs Specification Detail Part Number 2146-H24 Voltage Input 9–33V (Multivolt) Light Type LED Light Function Rear Indicator LEDs 24 Optics UWVO Ultra Wide Visibility Power Consumption 6W Mount Type Surface Mount Connector Pre-Wired Cable Length 200mm Ingress Protection IP67 Compliance ADR 6/00 Category 2a Dimensions (L×W×H) 195 × 125 × 35mm Warranty Five Years Compatible With / Goes Well With The HELLA 2146-H24 is compatible with existing HELLA Jumbo and Designline series surface mount combination lamp housings requiring an LED indicator module upgrade. Suited to semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies, rigid trucks, bus bodies, car carriers, and livestock trailers fitted with compatible HELLA Jumbo or Designline combination lamp housings. Pairs well with complementary HELLA LED upgrade modules for stop, tail, and reverse functions to complete a full LED conversion of existing Jumbo or Designline combination lamp housings, HELLA Triple Jumbo-S combination lamps including the 2430 and 2431 for full lamp replacement where a complete unit upgrade is preferred, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK, and trailer wiring looms and waterproof connectors for professional installation. Frequently Asked Questions Which existing HELLA lamp housings is the 2146-H24 compatible with? The 2146-H24 is designed to upgrade existing HELLA Jumbo and Designline series surface mount combination lamp housings. Confirm compatibility between the 2146-H24 module dimensions of 195 x 125 x 35mm and the specific housing model before purchase. Contact your HELLA supplier or refer to the HELLA compatibility guide to verify the correct module part number for your specific Jumbo or Designline housing variant. What does UWVO Ultra Wide Visibility Optics mean in practice? UWVO (Ultra Wide Visibility Optics) is HELLA's optics technology that extends the horizontal visibility angle of the indicator module beyond the standard forward-facing cone of conventional indicator lamps. In practice, this means following drivers, adjacent traffic, and road users approaching from the side can see the indicator activating across a wider horizontal arc, improving the conspicuity of turning and lane-change signals on large trucks and trailers where wide-angle indicator visibility is particularly important for road safety. What does ADR 6/00 Category 2a compliance mean for this indicator module? ADR 6/00 Category 2a is the Australian Design Rule governing rear indicator lamp functions on heavy vehicles. Category 2a specifies the required light output, flash rate, colour, and visibility angles for rear indicators on trucks and trailers. Compliance confirms the 2146-H24 meets the legal requirements for use as a rear indicator function in combination lamp housings on heavy vehicles operating on Australian public roads. Why is the cable on the 2146-H24 only 200mm long? The 200mm cable length is intentional for this module application. As a drop-in replacement module for an existing combination lamp housing, the 2146-H24 connects directly to the existing wiring already present inside the lamp housing rather than routing a long cable to the trailer loom. The short 200mm pigtail provides sufficient length for the internal connection within the housing while keeping the wiring neat and contained within the lamp body. Can the 2146-H24 be used on both 12V and 24V trailer systems? Yes. The 2146-H24 operates across a Multivolt 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single module covers both voltage levels without requiring separate variants, making it suitable for workshop and fleet environments managing mixed 12V and 24V trailer fleets.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2332-H24 Stop/Tail Light LED 9 to 33V Multivolt LED stop/tail module with EDT enhanced stop signal technology, Ultra Wide Visibility Optics, IP67 sealed construction, and ADR 6/00 Category 2a compliance, purpose-built to upgrade existing surface mount Designline combination lamp housings to LED technology across 9–33V electrical systems. Product Overview The HELLA 2332-H24 is a dedicated LED stop/tail module designed specifically to upgrade existing surface mount Designline series combination lamp housings from incandescent to LED technology without replacing the entire lamp assembly. This makes the 2332-H24 a cost-effective and practical solution for fleet operators and transport companies managing large trailer inventories fitted with existing HELLA Designline housings, enabling a targeted LED upgrade of the stop and tail functions while retaining the existing lamp body and mounting arrangement. A key differentiator of the 2332-H24 over standard stop/tail modules is its EDT (Enhanced Deceleration Technology) for the stop signal function. EDT is a HELLA-developed flash pattern technology that causes the stop lamp to pulse rapidly when heavy braking is detected, providing an additional visual cue to following drivers that the vehicle is decelerating quickly. This active safety feature is particularly valuable on heavy trucks and semi-trailers where rear-end collision risk during emergency braking is a significant road safety concern. The UWVO (Ultra Wide Visibility Optics) technology extends the horizontal visibility angle of both the stop and tail functions beyond the standard forward-facing visibility cone of conventional modules, improving side visibility to adjacent traffic and road users approaching from the side. Acrylic lens and base construction provide chemical resistance and physical durability suited to rear trailer panel environments. Fully sealed to IP67 against dust and moisture ingress, the module is pre-wired with 200mm of cable for connection into the existing Designline housing wiring circuit. The 195 x 125 x 34mm surface mount footprint is engineered to fit directly into compatible Designline lamp housings in a horizontal mount orientation. Multivolt 9–33V input covers standard 12V and 24V heavy vehicle electrical systems without requiring voltage-specific variants, and HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers. Features & Benefits Purpose-Built Designline LED Upgrade Module: Designed specifically to replace incandescent stop/tail modules in existing HELLA Designline surface mount combination lamp housings, enabling a targeted LED upgrade without replacing the entire lamp assembly, mounting hardware, or trailer panel wiring. EDT Enhanced Deceleration Technology: HELLA's EDT technology causes the stop lamp to pulse rapidly during heavy braking events, providing a dynamic visual warning to following drivers that the vehicle is decelerating quickly. This active safety feature significantly improves rear conspicuity during emergency braking on heavy trucks and semi-trailers where rear-end collision risk is elevated. UWVO Ultra Wide Visibility Optics: HELLA's Ultra Wide Visibility Optics technology extends the horizontal visibility angle of the stop and tail functions beyond the standard forward-facing cone, improving side visibility to adjacent traffic, pedestrians, and road users approaching from the side for enhanced all-round conspicuity. ADR 6/00 Category 2a Compliant: Meets Australian Design Rule 6/00 Category 2a for stop and tail lamp functions on heavy vehicles, confirming the 2332-H24 is road-legal as a stop/tail function module in combination lamp housings on trucks and trailers operating on Australian public roads. Acrylic Lens and Base Construction: Both lens and base are constructed from acrylic, providing increased chemical resistance against fuel, cleaning agents, and road contaminants that degrade standard lamp materials over time in heavy transport rear panel environments. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the demanding rear panel environments typical of heavy transport operation. Multivolt 9–33V Input: Covers the full range of 12V and 24V heavy vehicle electrical systems in a single module without requiring voltage-specific variants, simplifying procurement for mixed fleet and workshop environments. Pre-Wired 200mm Cable: Factory-fitted 200mm cable provides a short, neat wiring connection into the existing Designline housing wiring circuit, suited to the close-proximity internal wiring arrangement within a combination lamp body. Horizontal Surface Mount: The 195 x 125 x 34mm footprint is engineered for horizontal surface mount installation directly into compatible HELLA Designline lamp housings for a straightforward drop-in upgrade. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality LED upgrade modules for extended service life. Technical Specs Specification Detail Part Number 2332-H24 Voltage Input 9–33V (Multivolt) Light Type LED Light Function Stop / Tail Technology EDT, UWVO Lens Material Acrylic Base Material Acrylic Current Draw 0.3A Mount Type Surface Mount (Horizontal) Connector Pre-Wired Cable Length 200mm Ingress Protection IP67 Compliance ADR 6/00 Category 2a Dimensions (L×W×H) 195 × 125 × 34mm Warranty Five Years Compatible With / Goes Well With The HELLA 2332-H24 is compatible with existing HELLA Designline series surface mount combination lamp housings requiring an LED stop/tail module upgrade. Suited to semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies, rigid trucks, bus bodies, car carriers, and livestock trailers fitted with compatible HELLA Designline combination lamp housings. Pairs well with the HELLA 2146-H24 rear indicator LED upgrade module for a complete LED conversion of existing Designline combination lamp housings, other complementary HELLA LED upgrade modules for reverse and additional lamp functions, HELLA Triple Jumbo-S combination lamps including the 2430 and 2431 for full lamp replacement where a complete unit upgrade is preferred, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK, and trailer wiring looms and waterproof connectors for professional installation. Frequently Asked Questions What is EDT Enhanced Deceleration Technology and how does it work? EDT is HELLA's Enhanced Deceleration Technology for stop lamp functions. When the vehicle's braking system applies heavy deceleration, EDT causes the stop lamp to pulse rapidly in a flashing pattern rather than illuminating as a steady light. This dynamic flashing stop signal provides a stronger and more urgent visual warning to following drivers that the vehicle ahead is braking hard, improving reaction time and reducing rear-end collision risk. EDT is particularly valuable on heavy trucks and semi-trailers operating at highway speeds where the stopping distance of following vehicles is critical. Which HELLA Designline lamp housings is the 2332-H24 compatible with? The 2332-H24 is designed to upgrade existing HELLA Designline series surface mount combination lamp housings. Confirm compatibility between the 2332-H24 module dimensions of 195 x 125 x 34mm and the specific Designline housing model before purchase. Note that the 2146-H24 indicator module is described as compatible with both Jumbo and Designline housings, while the 2332-H24 specifies Designline housings specifically. Contact your HELLA supplier or refer to the HELLA compatibility guide to verify the correct module for your specific housing. How does the 2332-H24 differ from the HELLA 2146-H24 indicator module? Both modules are Multivolt LED upgrade modules for HELLA combination lamp housings, sharing the same 195 x 125mm footprint, IP67 rating, 9–33V input, 200mm pre-wired cable, and five-year warranty. The 2332-H24 covers the stop and tail functions with EDT and UWVO technology, while the 2146-H24 covers the indicator function with UWVO optics. The two modules complement each other for a complete LED conversion of the stop, tail, and indicator functions within a compatible combination lamp housing. What does UWVO Ultra Wide Visibility Optics mean in practice? UWVO (Ultra Wide Visibility Optics) is HELLA's optics technology that extends the horizontal visibility angle of the stop and tail functions beyond the standard forward-facing cone of conventional modules. In practice, this means following drivers, adjacent traffic, and road users approaching from the side can see both the stop and tail lamps activating across a wider horizontal arc, improving all-round conspicuity of braking and running light signals on large trucks and trailers. Can the 2332-H24 be used on both 12V and 24V trailer systems? Yes. The 2332-H24 operates across a Multivolt 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single module covers both voltage levels without requiring separate variants, making it suitable for workshop and fleet environments managing mixed 12V and 24V trailer fleets.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2559 Licence Plate Light LED 9 to 33V ADR 48/00 compliant LED licence plate light with IP67 sealed construction, insulated earth circuit compatibility, 0.5m pre-wired cable, and 5-year warranty, suited to trucks, trailers, and heavy commercial vehicles operating across 9–33V electrical systems. Note: 2 lights are required to achieve ADR 48/00 compliance. Product Overview The HELLA 2559 is a compact LED licence plate light delivering ADR 48/00 compliant number plate illumination for trucks, trailers, and heavy commercial vehicles. Designed for surface mount installation on rear panels, trailer tailgates, and number plate brackets, the 2559 provides clean, efficient LED illumination of the rear licence plate across a wide 9–33V Multivolt input range covering both 12V and 24V heavy vehicle electrical systems. An important compliance note: two HELLA 2559 units are required to meet ADR 48/00 licence plate lighting requirements for heavy vehicles. This dual-lamp requirement is standard for ADR 48/00 compliance on trucks and trailers and should be accounted for when purchasing. The 2559 is suitable for use on insulated earth circuits, making it compatible with the isolated earth wiring configurations found on many trailer electrical systems where the trailer body is not used as the earth return path. The compact 85 x 70 x 38mm body installs neatly onto rear panels and number plate brackets with a 40mm centre-to-centre mounting distance, and the 0.5m pre-wired cable provides sufficient length for connection into trailer rear wiring circuits without requiring extension cabling at the light unit. Fully sealed to IP67 against dust and water ingress, the 2559 is well suited to the exposed rear panel and under-body environments typical of trailer licence plate mounting positions. HELLA's five-year warranty provides long-term confidence for fleet operators, trailer manufacturers, and transport companies. Features & Benefits ADR 48/00 Compliant: Meets Australian Design Rule 48/00 for licence plate lamps on heavy vehicles, confirming the 2559 is road-legal for rear licence plate illumination on trucks and trailers operating on Australian public roads. Note: 2 units are required to achieve full ADR 48/00 compliance. LED Light Technology: Maintenance-free LED illumination delivers a significantly longer operational lifespan than incandescent licence plate lamps, reducing the frequency of lamp replacements on large trailer fleets and minimising compliance risk from failed plate lights during roadside inspections. Insulated Earth Circuit Compatible: Suitable for insulated earth wiring configurations where the trailer body is not used as the earth return path, ensuring compatibility with the isolated earth trailer electrical systems commonly specified on modern semi-trailers and refrigerated bodies. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed rear panel and under-body mounting positions typical of trailer licence plate lighting installations. 9–33V Multivolt Input: Covers the full range of 12V and 24V heavy vehicle electrical systems in a single unit without requiring voltage-specific variants, simplifying procurement for mixed fleet and workshop environments. Pre-Wired 0.5m Cable: Factory-fitted 0.5m cable provides sufficient length for connection into trailer rear wiring circuits without requiring extension cabling at the light unit, simplifying installation on rear panels and number plate brackets. Compact 85 x 70mm Surface Mount Profile: Low-profile body installs neatly onto rear panels, trailer tailgates, and number plate brackets with a 40mm centre-to-centre mounting distance, maintaining a clean rear panel appearance. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2559 Voltage Input 9–33V Light Type LED Light Function Licence Plate Illumination Mount Type Surface Mount Mount Centre-to-Centre 40mm Connector Pre-Wired Cable Length 0.5m Ingress Protection IP67 Compliance ADR 48/00 Insulated Earth Compatible Units for ADR Compliance 2 Dimensions (L×W×H) 85 × 70 × 38mm Warranty Five Years Compatible With / Goes Well With The HELLA 2559 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant LED licence plate illumination. Primary applications include semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, car carriers, livestock trailers, and heavy plant transport trailers requiring rear number plate compliance. Pairs well with the full HELLA truck and trailer lighting range including the 2431 Triple Jumbo-S combination lamp, 2430 Triple Jumbo-S stop/tail/indicator lamp, DuraLED COMBI-SR combination lamps, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK for a complete matched HELLA rear lighting solution, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional licence plate lamp installations. Frequently Asked Questions Why are 2 units required for ADR 48/00 compliance? ADR 48/00 prescribes specific illumination coverage requirements for rear licence plate lighting on heavy vehicles, including minimum light output levels and coverage angles across the full plate area. A single lamp unit positioned on one side of the plate does not provide sufficient even illumination across the full plate width to satisfy these requirements. Two lights, positioned at each end of the plate, together provide the combined illumination coverage needed to achieve full ADR 48/00 compliance. Always purchase and fit two HELLA 2559 units when specifying for ADR-compliant licence plate illumination. What does "insulated earth compatible" mean for this lamp? Insulated earth circuits are trailer wiring configurations where the trailer body or chassis is not used as the electrical earth return path. Instead, a dedicated earth wire is run back through the wiring harness to the towing vehicle or a separate earth point. Many modern semi-trailers and refrigerated bodies specify insulated earth wiring to prevent corrosion, voltage drop, and earth continuity issues common in chassis-earth systems. The 2559's insulated earth compatibility ensures it operates correctly in both standard chassis-earth and insulated earth trailer wiring configurations. What does ADR 48/00 compliance mean for licence plate lights? ADR 48/00 is the Australian Design Rule governing licence plate lamps on vehicles, specifying the minimum illumination output, coverage area, and colour requirements needed to ensure the rear number plate is clearly readable at a prescribed distance. Compliance confirms the 2559 meets these legal requirements for use as a licence plate lamp on trucks and trailers operating on Australian public roads. Fitting non-compliant or failed licence plate lighting is a common defect identified during roadside heavy vehicle inspections. Can the 2559 be used on both 12V and 24V trailer systems? Yes. The 2559 operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single unit covers both voltage levels without requiring separate variants, making it suitable for workshop and fleet environments managing mixed 12V and 24V trailer fleets. How is the 2559 installed on a trailer rear panel? The 2559 uses a surface mount design with a 40mm centre-to-centre mounting distance, installed directly onto the rear panel, tailgate, or number plate bracket adjacent to the licence plate. The pre-wired 0.5m cable connects into the trailer's rear wiring circuit at the licence plate lamp feed. Two units should be positioned at each end of the number plate to achieve even illumination coverage across the full plate width for ADR 48/00 compliance. Waterproof connectors and heat-shrink terminals are recommended for a sealed, professional installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2559BULK Licence Plate Light LED 9 to 33V 8 Pce ADR 48/00 compliant LED licence plate light in a bulk pack of 8, with 2.5m pre-wired cable, 20mm mounting spacer included, IP67 sealed construction, and 5-year warranty, suited to trucks, trailers, and heavy commercial vehicles on 12–24V systems. Note: 2 lights are required per vehicle to achieve ADR 48/00 compliance. Product Overview The HELLA 2559BULK is the bulk pack variant of the HELLA 2559 LED licence plate light, supplying 8 units in a single purchase for fleet operators, trailer manufacturers, and workshop professionals requiring volume stock for ongoing trailer builds, refurbishments, and maintenance. Each unit in the pack delivers ADR 48/00 compliant LED number plate illumination across a 12–24V input range, maintaining the same IP67 ingress protection and five-year warranty as the individual 2559 unit. A key practical difference from the individual 2559 is the significantly longer 2.5m pre-wired cable on the 2559BULK, providing ample routing length for installations where the trailer wiring connection point is located further from the licence plate mounting position — particularly useful on longer trailer bodies, rear-access refrigerated units, and tailgate-mounted installations where a 0.5m cable may fall short. Each unit is also supplied with a 20mm mounting spacer, providing a stand-off distance from the mounting surface that assists with positioning the lamp at the correct angle and height relative to the licence plate for optimal illumination coverage and ADR 48/00 compliance. With two units required per vehicle for ADR compliance, the pack of 8 provides sufficient stock for four complete ADR-compliant licence plate lighting installations, making the 2559BULK a practical procurement choice for trailer builders and fleet maintenance workshops managing regular fitment volumes. HELLA's five-year warranty applies to each unit in the pack. Features & Benefits Pack of 8 for Fleet and Workshop Procurement: Bulk pack of eight units provides sufficient stock for four complete two-lamp ADR-compliant licence plate lighting installations, streamlining procurement and reducing per-unit cost for trailer builders, fleet operators, and workshop environments with regular fitment volumes. ADR 48/00 Compliant: Meets Australian Design Rule 48/00 for licence plate lamps on heavy vehicles, confirming each unit is road-legal for rear licence plate illumination on trucks and trailers operating on Australian public roads. Two units per vehicle are required for full ADR 48/00 compliance. 20mm Mounting Spacer Included: A 20mm mounting spacer is supplied with each unit, providing a stand-off distance from the mounting surface to assist with correct lamp positioning and angle relative to the licence plate for optimal illumination coverage and ADR compliance. 2.5m Pre-Wired Cable: The generous 2.5m cable provides ample length for routing from the licence plate mounting position to the trailer rear wiring circuit connection point, accommodating longer trailer bodies, rear-access refrigerated units, and tailgate-mounted installations where shorter cable lengths are insufficient. LED Light Technology: Maintenance-free LED illumination delivers a significantly longer operational lifespan than incandescent licence plate lamps, reducing the frequency of lamp replacements on large trailer fleets and minimising compliance risk from failed plate lights during roadside inspections. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed rear panel and under-body mounting positions typical of trailer licence plate lighting installations. 12–24V Universal Input: Compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. HELLA 5-Year Warranty: Each unit in the pack is backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2559BULK Pack Contents 8 lights Voltage Input 12–24V Light Type LED Light Function Licence Plate Illumination Mount Centre-to-Centre 40mm Connector Pre-Wired Cable Length 2.5m Ingress Protection IP67 Compliance ADR 48/00 Mounting Spacer 20mm (included) Units for ADR Compliance 2 per vehicle Warranty Five Years Compatible With / Goes Well With The HELLA 2559BULK is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant LED licence plate illumination. Primary applications include semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, car carriers, livestock trailers, and heavy plant transport trailers. The bulk pack of 8 is particularly suited to trailer manufacturing facilities, fleet maintenance workshops, and transport companies managing ongoing trailer build and refurbishment programs. Pairs well with the full HELLA truck and trailer lighting range including the 2431 Triple Jumbo-S combination lamp, 2430 Triple Jumbo-S stop/tail/indicator lamp, DuraLED COMBI-SR combination lamps, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK for a complete matched HELLA rear lighting solution, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional licence plate lamp installations. Frequently Asked Questions How does the 2559BULK differ from the individual HELLA 2559 licence plate light? Both products are the same LED licence plate light unit with identical IP67 rating, ADR 48/00 compliance, and five-year warranty. The key differences are pack quantity, cable length, and included accessories. The 2559BULK supplies 8 units in a single purchase with a longer 2.5m cable and an included 20mm mounting spacer per unit, while the individual 2559 is sold as a single unit with a 0.5m cable and no spacer. Choose the 2559BULK for volume procurement, trailer builds, and installations where the longer 2.5m cable length is required. Why are 2 units required for ADR 48/00 compliance? ADR 48/00 prescribes minimum illumination output and coverage angle requirements across the full rear licence plate area. A single lamp positioned on one side of the plate does not provide sufficient even illumination across the full plate width to satisfy these requirements. Two lights, positioned at each end of the plate, provide the combined illumination coverage needed for full ADR 48/00 compliance. The 2559BULK pack of 8 provides enough units for four complete two-lamp ADR-compliant installations. What is the 20mm mounting spacer used for? The 20mm mounting spacer provides a stand-off distance between the lamp base and the mounting surface, positioning the light unit at a set distance from the rear panel or number plate bracket. This assists with achieving the correct lamp angle and height relative to the licence plate for optimal illumination coverage across the full plate area, and can also assist with routing the pre-wired cable neatly behind the mounting surface. The spacer is included with each unit in the bulk pack. Can the 2559BULK be used on both 12V and 24V trailer systems? Yes. The 2559BULK operates across a 12–24V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single unit covers both voltage levels without requiring separate variants, making the bulk pack practical for workshop and fleet environments managing mixed 12V and 24V trailer fleets. How is the 2559BULK installed on a trailer rear panel? Each unit uses a surface mount design with a 40mm centre-to-centre mounting distance, installed directly onto the rear panel, tailgate, or number plate bracket adjacent to the licence plate. The 20mm mounting spacer can be fitted between the lamp base and the mounting surface for correct positioning. The 2.5m pre-wired cable connects into the trailer's rear wiring circuit at the licence plate lamp feed. Two units should be positioned at each end of the number plate for even illumination and ADR 48/00 compliance. Waterproof connectors and heat-shrink terminals are recommended for a sealed, professional installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less