ADR 48/00 and ECE Approved 12/24V Licence Plate Lamp 70x42mm, Bulk Packaging, Two Required Product Overview The LED Autolamps 41BLMB is the bulk packaging variant of the 41BLM the same ADR 48/00 and ECE-approved 12/24V licence plate lamp at 70mm x 42mm x 40mm with a 0.25m cable lead and 45mm centre-to-centre mount, supplied in bulk rather than individual blister packs for trade and installer purchasing. Two lamps are required for ADR 48/00 compliance. Drawing 0.05A at 13.8V, IP67 rated, and backed by a 5-year warranty. Features & Benefits Bulk packaging — trade and installer packaging without individual retail blister ADR 48/00 and ECE approved — dual compliance; two lamps required for compliant installation 0.05A current draw — very low power consumption 0.25m pre-wired cable — ready to connect on installation IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 41BLMB Lamp Type Licence Plate Light Voltage Range 12V – 24V Dimensions 70mm x 42mm x 40mm Mount Centre-to-Centre 45mm Current Draw 0.05A @ 13.8V Cable Length 0.25m Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 / ECE ADR Note Two lamps required for compliance Packaging Bulk Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR-compliant licence plate lighting 12V light vehicles and 24V heavy transport applications LED Autolamps 41BLM (same lamp, individual blister pack) LED Autolamps 41BLMCSB (same form factor, AS2809/harness system variant) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 41BLMB lamps are required for ADR compliance? Two lamps are required to meet ADR 48/00 compliance. How does the 41BLMB differ from the 41BLM? Both are the same 70mm x 42mm ADR/ECE-approved licence plate lamp with 0.25m cable. The 41BLMB comes in bulk packaging for trade purchasing; the 41BLM comes in an individual blister pack. What is the current draw of the 41BLMB? The 41BLMB draws 0.05A at 13.8V — minimal impact on the vehicle's electrical system. What is the IP rating on the 41BLMB? The 41BLMB is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 41BLMB carry? The 41BLMB is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White Supplementary Cab Roof Marker Chrome Truck Series, Clear Lens, 3M Tape & Plug, ADR Approved, 9–32V. Product Overview The LED Autolamps 77WCM is a white supplementary cab roof marker from the 77 Series Chrome Truck Series a low-profile compact cab marker lamp designed to be fitted to the roof of trucks and commercial vehicles as supplementary front identification markers. The 77WCM is a Chrome Truck Series supplementary cab marker with waterproof seal between roof and lamp, 3M tape design, multi-volt 12V & 24V, ADR approved, single pack. Installation: drill a 10mm hole into a flat surface and mount horizontally to the ground with 3M Tape and serrated plug. LEDs must be facing the front of the vehicle. The 9–32V broad voltage range covers standard 12V and 24V truck electrical systems with significant headroom. IP67 rated, backed by LED Autolamps' 5-year warranty, and supplied as a single unit. Key Specifications Function: Supplementary cab roof marker (white LED) Lens: Clear with white LEDs Housing: Chrome Truck Series Dimensions: 77mm x 52mm x 22mm Fitting system: 3M Tape + serrated plug (10mm hole) Waterproofing: Waterproof between roof and lamp IP rating: IP67 Input voltage: 9–32V DC (multivolt) Compliance: ADR approved Warranty: 5 years Pack quantity: Single unit Brand: LED Autolamps SKU: 77WCM Features & Benefits Supplementary cab roof marker: Designed specifically for mounting on the truck cab roof as a supplementary front identification marker Chrome Truck Series: Premium chrome housing suited to truck and commercial vehicle cab roof styling Waterproof seal: Waterproof between roof and lamp seals against water ingress at the cab roof mounting point Clear lens with white LEDs: Modern clean lens appearance for white supplementary marker output 3M Tape and serrated plug: Fast, no-drill-free fitting drill 10mm hole, plug in, tape down no brackets or external screws visible LEDs face front: Installation orientation confirmed LEDs must face the front of the vehicle 9–32V broad voltage range: Wide multivolt range covering standard 12V and 24V truck systems IP67 waterproof: Completely sealed against dust and temporary water immersion ADR approved: Legal for supplementary cab marker use on Australian road vehicles 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 77WCM Brand LED Autolamps Series 77 Series Chrome Truck Series Function Supplementary Cab Roof Marker Lens Clear white LEDs Housing Chrome Dimensions 77mm x 52mm x 22mm Fitting System 3M Tape + serrated plug (10mm hole) Waterproofing Waterproof between roof and lamp + IP67 Input Voltage 9–32V DC (multivolt) LED Orientation LEDs face front of vehicle Compliance ADR approved Warranty 5 Years Pack Quantity Single unit Compatible With Suits all 12V and 24V trucks and commercial vehicles requiring supplementary cab roof markers: Semi-trailer prime movers and rigid trucks Commercial vehicles requiring supplementary cab identification lighting Truck cab roof marker upgrades Frequently Asked Questions Which direction should the LEDs face? LEDs must face the front of the vehicle confirm orientation before drilling the mounting hole. Is the waterproof seal between the lamp and roof included? Yes the 77WCM includes a waterproof seal between the roof and lamp to prevent water ingress at the cab roof mounting point. Is this lamp ADR approved? Yes ADR approved for supplementary cab marker use on Australian road vehicles. Does this lamp require any tools to install? A drill is required for the 10mm plug hole no other tools are needed for the 3M tape and plug fitting system. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Amber LED Side Marker with Inbuilt Reflector 3M Tape, Low Profile, ADR/ECE, IP67. Product Overview The LED Autolamps EU38AMHDB is an amber LED side marker lamp with an integrated reflex reflector from the EU38 series the standard blister pack version of the EU38 amber marker range. Measuring just 100mm x 38mm x 13mm with an ultra-slim 13mm profile, the EU38AMHDB provides ADR and ECE compliant amber side marker and reflector compliance in a single compact unit that mounts nearly flush to the mounting surface. The 3M adhesive tape fitting system makes installation fast and clean the lamp adheres directly to the trailer frame or body panel without brackets or multiple drill holes. The curved diamond pattern polycarbonate lens houses the amber LEDs with an integrated reflex reflector for combined active and passive side marker compliance. Compatible with both 12V and 24V systems, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit. Key Specifications Function: Amber side marker with integrated reflex reflector LED colour: Amber Lens: Polycarbonate curved diamond pattern Dimensions: 100mm x 38mm x 13mm Mount: 3M adhesive tape IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: EU38AMHDB Features & Benefits 3M adhesive tape fitting: Fast, clean installation without screws or brackets simply peel and press for a low-profile, professional result Ultra-slim 13mm profile: One of the most low-profile amber side markers available, maintaining clean lines on modern trailers and caravans Integrated reflex reflector: Combines active amber LED output and passive reflector compliance in a single compact unit Curved diamond pattern polycarbonate lens: Durable, UV-resistant lens in the signature EU38 series style ADR and ECE approved: Meets Australian Design Rules and ECE standards for amber side marker use on road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial truck applications 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU EU38AMHDB Brand LED Autolamps Series EU38 Series Function Amber Side Marker + Inbuilt Reflector LED Colour Amber Lens Polycarbonate curved diamond pattern Depth 13mm Length 100mm Width 38mm Mount Type 3M adhesive tape IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Packaging Single unit Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring amber ADR-compliant side markers including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Horse floats and livestock trailers Frequently Asked Questions How does the EU38AMHDB differ from the EU38BAMHDB? The EU38AMHDB and EU38BAMHDB share identical specifications same function, dimensions, LEDs, and compliance. The EU38BAMHDB is the bulk/bare pack variant while the EU38AMHDB is the standard single-unit version. Confirm packaging format with your retailer if a specific packaging type is required. Is this lamp ADR approved for Australian road use? Yes the EU38AMHDB is ADR and ECE approved, confirming it meets Australian legal requirements for amber side marker use on trailers and road vehicles. Does this lamp include a reflex reflector? Yes an integrated reflex reflector is built into the lamp body, providing both active amber LED output and passive reflective compliance in a single unit. What voltage systems does this lamp suit? The EU38AMHDB operates on 12–24V DC, making it compatible with both 12V passenger and caravan trailer applications and 24V commercial truck systems. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm mounting requirements and quantity needed before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Red 3 LED Side Marker with Inbuilt Reflector No Tools, 3M Tape, ADR/ECE, IP67. Product Overview The LED Autolamps EU38BRMHDB is a red LED side marker lamp with an integrated reflex reflector from the EU38 series one of the most widely used low-profile marker lamp designs across Australian trailers, caravans, and commercial vehicles. Measuring just 100mm x 38mm x 13mm with an ultra-slim 13mm profile, the EU38BRMHDB provides red side marker and reflector compliance in a single compact unit that mounts nearly flush to the surface. Installation is straightforward and requires no tools drill one 8mm hole for the cable, remove the protective film from the 3M adhesive backing, and push the lamp firmly into place using the two serrated plug locators on 60mm centres. The curved diamond pattern polycarbonate lens houses 3 red LEDs with an integrated reflex reflector for combined active and passive compliance on the sides of trailers and commercial vehicles. ADR and ECE approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit. Key Specifications Function: Red side marker with integrated reflex reflector LED count: 3 LEDs LED colour: Red Lens: Polycarbonate curved diamond pattern Dimensions: 100mm x 38mm x 13mm Locator spacing: 60mm centres (2x serrated plugs) Cable: Approx. 35cm Mount: 3M adhesive tape no tools required Mounting hole: 1x 8mm hole for cable IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR and ECE approved Warranty: 5 years Packaging: Single unit (bulk/bare pack) Brand: LED Autolamps SKU: EU38BRMHDB Features & Benefits No tools required: 3M adhesive tape and serrated plug locator installation simply drill one 8mm cable hole, peel and press into place Ultra-slim 13mm profile: Sits nearly flush with the mounting surface for clean, unobtrusive side marker positioning on trailer side rails and body panels Integrated reflex reflector: Combines active red LED output and passive reflector compliance in a single compact unit, reducing the total number of components required 3 red LEDs: Bright red LED output for side marker applications on 12V and 24V trailers and commercial vehicles Curved diamond pattern polycarbonate lens: Durable, UV-resistant lens in the signature EU38 series style ADR and ECE approved: Meets Australian Design Rules and ECE standards for side marker use on Australian road vehicles and trailers IP67 waterproof: Completely sealed against dust and temporary water immersion for reliable outdoor performance 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial truck applications 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU EU38BRMHDB Brand LED Autolamps Series EU38 Series Function Red Side Marker + Inbuilt Reflector LED Count 3 LED Colour Red Lens Polycarbonate curved diamond pattern Dimensions 100mm x 38mm x 13mm Locator Spacing 60mm centres (2x serrated plugs) Cable Length Approx. 35cm Mount Type 3M adhesive tape no tools required Mounting Hole 1x 8mm for cable IP Rating IP67 Input Voltage 12–24V DC (multivolt) Compliance ADR and ECE approved Warranty 5 Years Packaging Single unit (bulk/bare pack) Compatible With Universal suits all 12V and 24V trailers, caravans, and commercial vehicles requiring red ADR-compliant side markers including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Horse floats and livestock trailers Frequently Asked Questions Does this marker require drilling to install? Only one 8mm hole is required for the cable. The lamp body is secured entirely by the 3M adhesive tape and two serrated plug locators no screws, brackets, or additional holes are needed. Is this lamp ADR approved for Australian road use? Yes the EU38BRMHDB is ADR and ECE approved, confirming it meets Australian legal requirements for red side marker use on trailers and road vehicles. Does this lamp include a reflex reflector? Yes an integrated reflex reflector is built into the lamp body, providing both active red LED output and passive reflective compliance in a single unit. How does this lamp differ from the EU38BWMHDB? The EU38BRMHDB emits red light for side marker applications while the EU38BWMHDB emits white light for front end outline marker applications. Both share the same EU38 series dimensions, 3M adhesive mounting, and specifications. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm mounting requirements and quantity needed before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR-Approved Amber Side Marker with Brushed Stainless Steel Bezel Low Profile Truck Style for Trailers and Commercial Vehicles Product Overview The LED Autolamps 86AAM is a low-profile amber side marker lamp featuring an amber lens with amber LEDs and a brushed stainless steel bezel, finished in the popular truck-style format widely used on trailers, caravans, horse floats, and commercial vehicles across Australia. Measuring 86mm x 31mm x 10mm, its slim 10mm profile sits flush against body panels and trailer frames without protruding or snagging. ADR approved and IP67 rated, the 86AAM meets the requirements for road-legal side marker use and handles the full exposure of outdoor and towing conditions dust, high-pressure wash, road spray, and temporary water immersion. The 12–24V operating range covers both light vehicle and heavy commercial applications without modification, and the brushed stainless steel bezel provides a corrosion-resistant, premium appearance that holds up over long service life. Backed by a 5-year warranty. Features & Benefits ADR approved — road-legal for use as a side marker lamp on Australian trailers and vehicles; meets the applicable Australian Design Rule for side marker lighting Amber lens with amber LEDs — correct colour designation for side marker lamps; high-visibility amber output for approaching vehicles from the side Brushed stainless steel bezel — corrosion-resistant, premium-finish surround that maintains its appearance in outdoor, coastal, and high-humidity environments common to Australian trailer and commercial vehicle use Popular truck style — the recognisable rectangular format used widely on heavy vehicles, semis, and commercial trailers; adds a professional finish to trailer and caravan builds Low profile 10mm depth — slim enough to mount on most trailer body panels and chassis rails without significant protrusion; 86mm x 31mm footprint suits standard side marker positions IP67 rated — 100% waterproof — fully sealed against dust and protected against temporary water immersion; suitable for boat trailers, agricultural equipment, and all-weather towing 12–24V multi-volt — operates on both 12V and 24V systems without modification; suits light trailers through to heavy commercial vehicles 5-year warranty — LED Autolamps' standard warranty applied to this lamp Technical Specs Specification Detail SKU 86AAM Lamp type Side marker Lens colour Amber LED colour Amber Bezel material Brushed stainless steel ADR compliance Yes IP rating IP67 Voltage range 12–24V Size 86mm (L) x 31mm (W) x 10mm (D) Profile Low profile Wattage / current draw Not specified — confirm with supplier LED count Not specified — confirm with supplier Mounting type Not specified — confirm with supplier Connector / wiring Not specified — confirm with supplier Warranty 5 years Compatible With / Goes Well With Trailers, caravans, horse floats, semi-trailers, and commercial vehicles requiring ADR-compliant amber side marker lamps 12V and 24V electrical systems (multi-volt, no modification required) Boat trailers and marine-adjacent applications requiring IP67-rated markers Pairs with LED Autolamps trailer lamp, combination lamp, and wiring harness range for a complete trailer lighting build Weight Not specified Frequently Asked Questions Is the lens amber or clear on this lamp? The lens is amber. Despite one line in the features section stating "clear lens", both the product title and specification description confirm "Amber Lens Coloured LEDs", consistent with the SKU designation 86AAM. Contact LED Autolamps directly if a clear lens version is required. What vehicles and applications is this side marker suited to? The 86AAM suits trailers, caravans, horse floats, semi-trailers, and commercial vehicles in the popular truck-style side marker format. ADR approval confirms it is road-legal for side marker use on Australian-registered trailers and vehicles. How is this lamp mounted and what wiring connector does it use? Mounting type and wiring connector details are not specified in the supplier data. Confirm installation requirements with LED Autolamps or contact F.A.E. before purchasing to ensure it suits your trailer or vehicle setup. Why does the stainless steel bezel matter on a trailer marker? Brushed stainless steel is significantly more corrosion-resistant than chrome-plated or painted bezels, which can rust, peel, or oxidise over time — especially on boat trailers, coastal caravans, and commercial vehicles exposed to salt, moisture, and UV. The stainless bezel maintains its appearance and structural integrity over a longer service life. What current or wattage does the 86AAM draw? Wattage and current draw figures are not included in the supplier data. If power consumption is critical for your wiring or load calculation, contact LED Autolamps for the specified draw at 12V and 24V. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Stop/Tail/Indicator/Reverse Jumbo Lamp Diffused Tail, Coloured Lens Product Overview The LED Autolamps 595BARWM is a 12/24V Jumbo rear combination lamp covering stop, tail, indicator, and reverse with a diffused tail function and coloured lens, in Jumbo blister packaging. ECE road approved and suited to wide-body trucks, heavy trailers, and commercial vehicles requiring a large-format rear combination lamp. Features & Benefits Diffused tail function — smooth, even tail light output for a premium, clean appearance Coloured lens — coloured lamp lens for a defined appearance when active ECE approved — meets international road approval standards for legal on-road use Jumbo blister packaging — supplied in Jumbo format packaging Stop, tail, indicator, and reverse — four rear lighting functions in a single unit 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 595BARWM Lamp Type Stop / Tail / Indicator / Reverse Tail Function Diffused Lens Coloured Voltage Range 12V / 24V Compliance ECE Packaging Jumbo blister Compatible With / Goes Well With Wide-body trucks, semi-trailers, and heavy commercial vehicles requiring Jumbo-format rear combination lighting 12V and 24V vehicle electrical systems LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 595BARWM approved for road use in Australia? Yes. The 595BARWM is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia. What functions does the 595BARWM cover? It combines stop, tail, indicator, and reverse in a single Jumbo unit with diffused tail function. What are the dimensions of the 595BARWM? Dimensions were not confirmed in available supplier data — verify with LED Autolamps before ordering. What is the IP rating on the 595BARWM? IP rating was not confirmed in available supplier data — verify before use in exposed or wet environments. What warranty does the 595BARWM carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

IMO and USL Compliant 12/24V Marine Stern/Towing Navigation Lamp ATAC Approved, IP67, Salt Spray Resistant Product Overview The LED Autolamps 52WW is a 12/24V white LED marine navigation lamp for stern and towing applications, in a white housing. It complies with International Maritime Organization (IMO) codes and Uniform Shipping Laws (USL), and meets ATAC requirements for Australian waters. Stern lamps are required at the rear of a vessel and must be visible from astern a critical navigation convention for collision avoidance. IP67 rated and salt spray resistant, backed by a 5-year warranty. Features & Benefits Stern/towing navigation lamp — white output for the stern of the vessel, visible from astern per IMO requirements IMO and USL compliant — meets International Maritime Organization codes and Uniform Shipping Laws ATAC compliant — meets Australian Transport Advisory Council requirements for Australian waters Salt spray resistant — construction withstands the corrosive marine environment White housing — standard navigation lamp appearance IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with 12V and 24V vessel electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 52WW Lamp Type Marine Navigation — Stern / Towing LED Colour White Housing Colour White Voltage Range 12V / 24V Application Deck / Stern Protection Rating IP67 Compliance IMO, USL, ATAC Warranty 5 years Compatible With / Goes Well With Recreational and commercial vessels requiring IMO/ATAC-compliant stern and towing navigation lamps 12V and 24V vessel electrical systems LED Autolamps 52WR port navigation lamp (red — same navigation lamp family) LED Autolamps 52WG starboard navigation lamp (green — same navigation lamp family) Frequently Asked Questions What is a stern lamp used for? A stern lamp shows white light from the rear of the vessel to indicate to following vessels that they are viewing the boat from astern. It is a mandatory navigation light under IMO regulations and must be visible across a specific arc from directly behind the vessel. What compliance standards does the 52WW meet? The 52WW complies with International Maritime Organization (IMO) codes, Uniform Shipping Laws (USL), and ATAC (Australian Transport Advisory Council) requirements — covering both international and Australian domestic waterway navigation. Is the 52WW suitable for towing applications? Yes. The 52WW is specified for both stern and towing navigation lamp applications — confirm the specific arc and intensity requirements for towing lamp use with AMSA or relevant maritime authority for your vessel type. Is the 52WW suitable for saltwater use? Yes. It is specifically salt spray resistant and rated IP67. Regular rinsing with fresh water after saltwater exposure is good practice to extend service life. What warranty does the 52WW carry? The 52WW is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Stop/Tail/Indicator/Reverse Twin Pack Black Bracket, Surface Mount, IP67 Product Overview The LED Autolamps 407BARWM-2 is a rear combination lamp twin pack covering stop, tail, indicator, and reverse functions in a black bracket surface-mount housing. Both lamps are supplied for a complete left and right rear installation. ADR Australian road approved and IP67 rated. Features & Benefits Twin pack — both lamps supplied for a complete left and right rear installation Black bracket — clean, professional finish Stop, tail, indicator, and reverse — four rear lighting functions in a single unit Surface mount — straightforward installation on trailer and vehicle rear panels ADR Australian road approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 407BARWM-2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reverse Housing Colour Black Voltage Range 12V / 24V Mounting Surface mount Protection Rating IP67 Compliance ADR Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a rear combination lamp twin set 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 407BARWM-2 approved for road use in Australia? Yes. The 407BARWM-2 is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use across all four functions. Is the 407BARWM-2 supplied as a left and right pair? Yes. The twin blister pack supplies both lamps for a complete left and right rear installation. What functions does the 407BARWM-2 cover? It combines stop, tail, indicator, and reverse functions in a single surface-mount black bracket unit. What is the IP rating on the 407BARWM-2? The 407BARWM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 407BARWM-2 carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Certified 12/24V Side Indicator Lamp Surface Mount, 0.4m Cable, 5-Year Warranty Product Overview The LED Autolamps 38CAM is a 12/24V LED side indicator lamp, ADR certified for legal on-road use as a side indicator. Supplied with a 0.4m cable lead for surface mounting on trailers, trucks, and commercial vehicles. Backed by a 5-year warranty. Features & Benefits Amber LED output — correct amber colour for side indicator applications 0.4m pre-wired cable — ready to connect on installation Surface mount — straightforward installation on trailer and vehicle side panels ADR certified — meets Australian Design Rules for legal on-road use as a side indicator lamp 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 38CAM Lamp Type Side Indicator Voltage Range 12V / 24V Cable Length 0.4m Mounting Surface mount Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring side indicator lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 38AM side direction indicator with reflector (same 38 series) LED Autolamps 38ARM red/amber side marker (same 38 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 38CAM approved for road use in Australia? Yes. The 38CAM is ADR certified, meeting Australian Design Rules requirements for legal on-road use as a side indicator lamp. What LED colour does the 38CAM produce? LED colour was not confirmed in available supplier data — amber output is expected for a side indicator application, but confirm with LED Autolamps before ordering. How does the 38CAM differ from the 38AM? The 38AM has an inbuilt reflex reflector, confirmed dimensions of 135mm x 38mm, and full ADR road approval details. The 38CAM is listed as ADR certified with a 0.4m cable but with no confirmed dimensions or reflector — confirm specific differences with LED Autolamps before ordering. What is the IP rating on the 38CAM? IP rating was not confirmed in available supplier data — verify before use in exposed or wet environments. What warranty does the 38CAM carry? The 38CAM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Chrome Side Direction Indicator 76x42mm, IP67, Multiple Cable Options Product Overview The LED Autolamps 35CCAM is a 12/24V amber side direction indicator in a chrome bracket, measuring 76mm x 42mm x 30mm and supplied with a 40cm cable. The amber-only counterpart to the 35CCARM red/amber side marker, it shares the same form factor, chrome bracket option, and cable flexibility available in 40cm, 1m, or 6m including a plug-in option, and in both chrome and black bracket variants. ADR approved, IP67 rated. Features & Benefits Chrome bracket — premium polished finish for trucks, commercial vehicles, and custom builds Amber LED output — correct amber colour for side direction indicator function Multiple cable options — available with 40cm, 1m, or 6m cable and plug-in option; confirm required variant with F.A.E. Available in black and chrome bracket — match the bracket finish to the vehicle or trailer ADR approved — meets Australian Design Rules for legal on-road use as a side direction indicator IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 35CCAM Lamp Type Side Direction Indicator LED Colour Amber Bracket Colour Chrome Voltage Range 12V / 24V Dimensions 76mm x 42mm x 30mm Cable Length 400mm (40cm) Mounting Surface mount Protection Rating IP67 Compliance ADR Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring chrome-finish side direction indicator lamps 12V and 24V vehicle electrical systems LED Autolamps 35CCARM chrome red/amber side marker (same chrome series, dual-colour variant) LED Autolamps side direction indicator lamps in black bracket (same function, alternate finish) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 35CCAM approved for road use in Australia? Yes. The 35CCAM is ADR approved, meeting Australian Design Rules requirements for legal on-road use as a side direction indicator lamp. How does the 35CCAM differ from the 35CCARM? The 35CCAM is an amber-only side direction indicator, while the 35CCARM is a red/amber dual-colour side marker. Both share the same 76mm x 42mm chrome bracket form factor and cable options — choose based on the required function. What cable length options are available? The 35CCAM is available with 40cm, 1m, or 6m cable including a plug-in option — the 40cm variant is this listing. Longer cable variants are available; confirm the required length with F.A.E. when ordering. What is the IP rating on the 35CCAM? The 35CCAM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 35CCAM carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12/24V 280 Series Reverse Lamp Insert 12 LEDs, Individual Lens Replacements, IP67 Product Overview The LED Autolamps 280WM is a 12/24V reverse lamp insert for the 280 series, fitted with 12 high-brightness LEDs and measuring 190mm x 95mm x 28mm the same form factor as the 280ARM combination lamp. The individual lens replacement design allows the lens to be serviced independently without removing the full unit. ECE road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits 12 LEDs — high-brightness white reverse output across the 190mm lamp face Individual lens replacements — lens can be replaced independently, reducing maintenance costs on commercial fleets 190mm x 95mm form factor — matches the 280ARM for a consistent appearance in the 280 series ECE road approved — meets international road approval standards for legal on-road use as a reverse lamp IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 280WM Lamp Type Reverse Insert LED Quantity 12 LED Colour White Voltage Range 12V / 24V Dimensions 190mm x 95mm x 28mm Lens Individual replacements Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With LED Autolamps 280ARM stop/tail/indicator lamp (same 190mm x 95mm form factor — adds reverse function) LED Autolamps 280ARRM and 280ARWM combination lamps (same 280 series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 280WM approved for road use in Australia? Yes. The 280WM is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia as a reverse lamp. How does the 280WM pair with the 280ARM? The 280ARM covers stop, tail, and indicator in the same 190mm x 95mm form factor. Adding the 280WM provides the reverse function — together completing a full rear lighting set using individually mounted 280 series lamps. What does individual lens replacement mean? The lens clips out independently, allowing replacement without removing the full lamp housing from the panel — reducing maintenance cost and time. What is the IP rating on the 280WM? The 280WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 280WM carry? The 280WM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR8W LED Clearance Light White Clear Lens 10-30V An ADR-approved IP67 LED clearance lamp from the Roadvision BR8 Series, the BR8W features 4 white LEDs with a clear polycarbonate lens and housing, 10-30V DC multi-volt operation, 74x38x22mm rectangle form factor, and a 300mm tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR8W is a rectangle LED clearance lamp from the BR8 Series with a clear polycarbonate lens and 4 white LEDs, suited to trailer, caravan, truck, and commercial vehicle front clearance lighting applications. IP67 rated, ADR approved, and CTA certified (CTA-062089). Compatible with 10-30V DC systems. Pre-wired with a 300mm tinned copper cable with earth (white) and marker (brown) wires. Rated lifespan of 100,000 hours. Features & Benefits ADR Approved and CTA Certified: The BR8W holds ADR approval and CTA certification CTA-062089, confirming compliance with Australian road requirements for clearance lamp applications. IP67 Waterproof and Dustproof: IP67 rating provides full dust and waterproof protection for exposed trailer and vehicle body mounting locations. Polycarbonate Clear Lens and Housing: Unbreakable polycarbonate construction on both the clear lens and housing provides long-term durability and impact resistance. 4 White LEDs - 100,000 Hour Rated Lifespan: Four white LEDs through a clear lens deliver bright clearance light output with a rated 100,000 hour lifespan for maintenance-free performance. Multi-Volt 10-30V DC: Compatible with 12V and 24V vehicle and trailer electrical systems. 300mm Tinned Copper Pre-Wired Cable: Corrosion-resistant tinned copper wiring with earth (white) and marker (brown) wires. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR8W Brand Roadvision Series BR8 Description Clearance Lamp Rectangle White Function Clearance LED Quantity 4 White LEDs Input Voltage 10-30V DC Current Draw 0.05A at 13.8V Dimensions 74mm x 38mm x 22mm Lens Construction Polycarbonate (Clear) Housing Construction Polycarbonate Mounting Hole/Cutout 28.5mm and 50.8mm Cable Length 300mm Tinned Copper Wiring Earth - White, Marker - Brown IP Rating IP67 CTA Approval CTA-062089 ADR Approved Yes Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR8W is compatible with 10-30V DC trailer and vehicle electrical systems. ADR and CTA approved for on-road use. Confirm mounting cutout dimensions (28.5mm and 50.8mm) before purchase. Frequently Asked Questions Is the BR8W ADR approved? Yes. The BR8W is ADR approved and holds CTA approval CTA-062089 for clearance lamp applications. Is the BR8W compatible with 24V systems? Yes. The BR8W operates across 10-30V DC, compatible with both 12V and 24V systems. What is the difference between the BR8W and the other BR8 Series lamps? All BR8 Series lamps share the same dimensions, housing, electrical specifications, and ratings. The BR8W has a clear lens with white LEDs for front clearance applications. The BR8R has a red lens, the BR8A has an amber lens with combined indicator and clearance function, and the BR8AR has a red and amber lens. What are the mounting cutout dimensions for the BR8W? 28.5mm and 50.8mm. Confirm against your specific panel before purchase. What is the lifespan of the BR8W? 100,000 hours.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less