Roadvision RHL07HB 7" LED Headlamp Insert High Beam and Parking 5700K A 7" LED headlamp insert with high beam and parking functions from Roadvision, the RHL07HB delivers 1800 lumens on high beam at 252 metres at 1 lux with 5700K output, aluminium housing, polycarbonate lens, IP67 and IP69K protection, 500mm pre-wired H4 connector, ADR approved (CTA-062225), and a 5-year warranty. Product Overview The Roadvision RHL07HB is a 7" LED headlamp insert designed to replace existing 7" headlight units in vehicles with a 7" round headlamp aperture. It provides high beam and parking functions, delivering 1800 lumens on high beam at 252 metres at 1 lux and 4W parking light output from 33 park LEDs. The crisp 5700K white output provides a modern, bold appearance on the road. The lightweight die-cast aluminium housing with unbreakable polycarbonate lens and IP67 and IP69K dual protection rating ensures durability in all environments including high-pressure wash-down. Multi-volt 10-30V DC input at 1.6A for high beam and 0.3A for parking at 13.8V. Pre-wired with a 500mm sheath cable and H4 connector for simple, reliable installation. ADR approved, CTA-062225. 100,000 hour rated LED lifespan. Backed by a 5-year warranty. Features & Benefits 1800 Lumens High Beam - 252 Metres at 1 Lux: The RHL07HB delivers 1800 lumens on high beam with a beam reach of 252 metres at 1 lux, providing strong high-beam illumination for improved visibility on dark roads. 5700K Crisp White Output: The 5700K colour temperature produces a crisp white output close to daylight for a modern, bold appearance and natural colour rendering on the road surface. Integrated Parking Light - 33 Park LEDs at 4W: The integrated 33 LED parking light provides 4W park light output for a complete headlamp insert solution with both high beam and park functions in a single unit. Replaces Existing 7" Headlight Units: The RHL07HB is designed as a direct replacement for existing 7" round headlamp units, simplifying the upgrade process without requiring housing modification. Sleek Modern Black Design: The black housing provides a contemporary appearance that complements modern vehicle styling. Lightweight Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and effective heat dissipation, while the unbreakable polycarbonate lens resists impact and UV degradation. IP67 and IP69K Dual Protection: Both IP67 and IP69K ratings confirm full protection against dust, temporary immersion, and high-pressure, high-temperature water jet exposure, providing maximum durability in all environments. 100,000 Hour LED Lifespan with Solid-State Technology: The 100,000 hour rated LED lifespan provides long-term maintenance-free reliability with virtually zero maintenance requirements. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle electrical systems. Pre-Wired 500mm H4 Connector: The 500mm sheath cable with H4 connector provides simple, reliable plug-in installation into existing 7" headlamp wiring. ADR Approved - CTA-062225: The RHL07HB is ADR approved and holds CTA approval CTA-062225, confirming compliance with Australian road requirements for headlamp applications. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RHL07HB Brand Roadvision Series RHL07 Description 7" LED Headlamp Insert High Beam Functions High Beam, Parking High Beam Lumens 1800lm High Beam Distance at 1 Lux 252m Maximum Watts - High Beam 21W Maximum Watts - Parking 4W LED Quantity - High Beam 4 LEDs LED Quantity - Parking 33 LEDs Input Voltage 10-30V DC Current Draw - High Beam 1.6A at 13.8V Current Draw - Parking 0.3A at 13.8V Colour Temperature 5700K Lens Construction Polycarbonate Housing Construction Aluminium IP Rating IP67 and IP69K Dimensions 178mm x 83mm Wiring 500mm Sheath Cable with H4 Connector ADR Approval CTA-062225 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The RHL07HB is designed to replace existing 7" round headlamp units. The 500mm sheath cable with H4 connector provides direct plug-in installation into existing 7" headlamp wiring. Compatible with 10-30V DC vehicle electrical systems. ADR approved for on-road use in Australia. A high/low beam version is available as the RHL07HLB. Frequently Asked Questions Is the RHL07HB ADR approved for on-road use? Yes. The RHL07HB is ADR approved and holds CTA approval CTA-062225, confirming compliance with Australian road requirements for headlamp applications. Does the RHL07HB have a low beam function? No. The RHL07HB is a dedicated high beam and parking insert. For a version with high beam, low beam, and parking functions, refer to the RHL07HLB. What connector does the RHL07HB use? The RHL07HB is pre-wired with a 500mm sheath cable and H4 connector for direct plug-in installation into existing 7" headlamp wiring. Is the RHL07HB compatible with 24V vehicles? Yes. The RHL07HB operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is the IP rating of the RHL07HB? The RHL07HB holds both IP67 and IP69K ratings, confirming full protection against dust, temporary immersion, and high-pressure, high-temperature water jet exposure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RHL07HLB 7" LED Headlamp Insert High Beam Low Beam and Parking 5700K A 7" LED headlamp insert with high beam, low beam, and parking functions from Roadvision, the RHL07HLB delivers 1800 lumens on high beam at 252 metres at 1 lux and 1000 lumens on low beam at 100 metres at 1 lux with 5700K output, aluminium housing, polycarbonate lens, IP67 and IP69K protection, 500mm pre-wired H4 connector, ADR approved (CTA-062224), and a 5-year warranty. Product Overview The Roadvision RHL07HLB is a 7" LED headlamp insert designed to replace existing 7" headlight units, providing high beam, low beam, and parking functions in a single unit. High beam delivers 1800 lumens at 252 metres at 1 lux via 1 high beam LED. Low beam delivers 1000 lumens at 100 metres at 1 lux via 3 low beam LEDs. Thirty-three park LEDs provide 4W parking light output. The crisp 5700K white output provides a modern, bold road presence. Lightweight die-cast aluminium housing with unbreakable polycarbonate lens and IP67 and IP69K dual protection. Multi-volt 10-30V DC input at 1.8A for high beam, 1.3A for low beam, and 0.3A for parking at 13.8V. Pre-wired with a 500mm sheath cable and H4 connector. ADR approved, CTA-062224. 100,000 hour rated LED lifespan. Backed by a 5-year warranty. Features & Benefits 1800 Lumens High Beam and 1000 Lumens Low Beam: The RHL07HLB delivers 1800 lumens on high beam at 252 metres at 1 lux and 1000 lumens on low beam at 100 metres at 1 lux, providing both high-performance high beam and effective low beam illumination from a single insert. 5700K Crisp White Output: The 5700K colour temperature produces a crisp white output for a modern, bold appearance and natural colour rendering in both high beam and low beam modes. Complete High Beam, Low Beam, and Parking Functions: The RHL07HLB provides all three headlamp functions (high beam, low beam, and parking) in a single 7" insert unit, replacing the full functionality of the factory headlamp. Integrated Parking Light - 33 Park LEDs at 4W: The integrated 33 LED parking light provides 4W park light output alongside the high and low beam functions. Replaces Existing 7" Headlight Units: The RHL07HLB is designed as a direct replacement for existing 7" round headlamp units, simplifying the upgrade process without requiring housing modification. Sleek Modern Black Design: The black housing provides a contemporary appearance that complements modern vehicle styling. Lightweight Die-Cast Aluminium Housing with Polycarbonate Lens: The lightweight die-cast aluminium housing provides structural rigidity and effective heat dissipation, while the unbreakable polycarbonate lens resists impact and UV degradation. IP67 and IP69K Dual Protection: Both IP67 and IP69K ratings confirm full protection against dust, temporary immersion, and high-pressure, high-temperature water jet exposure. 100,000 Hour LED Lifespan with Solid-State Technology: The 100,000 hour rated LED lifespan provides long-term maintenance-free reliability with virtually zero maintenance requirements. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle electrical systems. Pre-Wired 500mm H4 Connector: The 500mm sheath cable with H4 connector provides simple, reliable plug-in installation into existing 7" headlamp wiring. ADR Approved - CTA-062224: The RHL07HLB is ADR approved and holds CTA approval CTA-062224, confirming compliance with Australian road requirements for headlamp applications. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RHL07HLB Brand Roadvision Series RHL07 Description 7" LED Headlamp Insert High/Low Beam Functions High Beam, Low Beam, Parking High Beam Lumens 1800lm Low Beam Lumens 1000lm High Beam Distance at 1 Lux 252m Low Beam Distance at 1 Lux 100m Maximum Watts - High Beam 21W Maximum Watts - Low Beam 10.8W Maximum Watts - Parking 4W LED Quantity - High Beam 1 LED LED Quantity - Low Beam 3 LEDs LED Quantity - Parking 33 LEDs Input Voltage 10-30V DC Current Draw - High Beam 1.8A at 13.8V Current Draw - Low Beam 1.3A at 13.8V Current Draw - Parking 0.3A at 13.8V Colour Temperature 5700K Lens Construction Polycarbonate Housing Construction Aluminium IP Rating IP67 and IP69K Dimensions 178mm x 83mm Wiring 500mm Sheath Cable with H4 Connector ADR Approval CTA-062224 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The RHL07HLB is designed to replace existing 7" round headlamp units. The 500mm sheath cable with H4 connector provides direct plug-in installation into existing 7" headlamp wiring. Compatible with 10-30V DC vehicle electrical systems. ADR approved for on-road use in Australia. A dedicated high beam and parking version is available as the RHL07HB. Frequently Asked Questions Is the RHL07HLB ADR approved for on-road use? Yes. The RHL07HLB is ADR approved and holds CTA approval CTA-062224, confirming compliance with Australian road requirements for headlamp applications covering high beam, low beam, and parking functions. What is the difference between the RHL07HLB and the RHL07HB? The RHL07HLB provides high beam, low beam, and parking functions in a single insert, with 1000 lumens on low beam at 100 metres at 1 lux in addition to the 1800 lumen high beam. The RHL07HB is a dedicated high beam and parking insert only, without a low beam function. Choose the RHL07HLB for a complete high and low beam headlamp replacement. What connector does the RHL07HLB use? The RHL07HLB is pre-wired with a 500mm sheath cable and H4 connector for direct plug-in installation into existing 7" headlamp wiring. Is the RHL07HLB compatible with 24V vehicles? Yes. The RHL07HLB operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is the IP rating of the RHL07HLB? The RHL07HLB holds both IP67 and IP69K ratings, confirming full protection against dust, temporary immersion, and high-pressure, high-temperature water jet exposure.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RBL5221SC Stealth S52 Series 21" LED Light Bar 127W Projector Combo Beam A 21" 127W projector combo beam LED light bar from the Roadvision Stealth S52 Series, the RBL5221SC delivers 9560 lumens with a beam distance of 1088 metres at 0.5 lux and 544 metres at 1 lux, powered by 15 x 10W Osram LEDs, featuring a smoked lens, blackout mounting hardware, Thermal Management Technology, IP68 and IP69K protection, and a 7-year warranty. Product Overview The Roadvision RBL5221SC is a 21" single row LED light bar from the Stealth S52 Series. Fifteen 10W Osram LEDs produce 127W in a projector combo beam combining 9 driving and 6 spot projectors, delivering 9560 lumens with 2964 lux at 10 metres, 544 metres at 1 lux, and 1088 metres at 0.5 lux. The smoked lens and blackout mounting hardware maintain the stealth aesthetic. Roadvision's Thermal Management Technology, IP68 and IP69K dual protection, multi-volt 10-30V DC at 6.2-10.6A at 13.8V, over/under voltage and reverse polarity protection, EMI/EMC radio interference approval, 2-pin ATP plug, 50,000 hour LED lifespan, and 7-year warranty. Features & Benefits 9560 Lumens - 1088 Metres at 0.5 Lux: Delivers 9560lm with 2964 lux at 10 metres, 544m at 1 lux, and 1088m at 0.5 lux for strong mid-range output suited to bull bar and roof rack applications. Projector Combo Beam - 9 Driving and 6 Spot Projectors: Combines 9 driving and 6 spot projectors for both lateral coverage and extended long-range penetration. 15 x 10W Osram LEDs - 127W Super White Output: Fifteen 10W Osram LEDs produce super-white daylight-close output. Smoked Lens and Blackout Mounting Hardware: Low-profile stealth appearance on the vehicle. Roadvision Thermal Management Technology: Consistent output and long-term reliability across all operating environments. IP68 and IP69K Dual Protection: Full protection against sustained immersion and high-pressure wash-down. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight, tough construction for demanding applications. 50,000 Hour LED Lifespan: Long-term maintenance-free reliability. Multi-Volt 10-30V DC with Electronic Protection: Compatible with 12V and 24V systems with full protection. 2-Pin ATP Plug: Secure, weatherproof, vibration-resistant connection. EMI/EMC Radio Interference Approved: Compatible with vehicle electronic systems. 7-Year Warranty: Backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RBL5221SC Brand Roadvision Series Stealth S52 Description S52 Series 21" LED Light Bar Beam Type Projector Combo (9 Driving / 6 Spot) Maximum Lumens 9560lm Maximum Lux at 10m 2964lx Beam Distance at 1 Lux 544m Beam Distance at 0.5 Lux 1088m Maximum Watts 127W LED Quantity 15 x 10W Osram Current Draw 6.2-10.6A at 13.8V Input Voltage 10-30V DC Bar Length 21" (524mm) Dimensions 524mm x 67mm x 52mm Wiring 2-Pin ATP Plug IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Warranty 7 Years Compatible With The RBL5221SC is compatible with 10-30V DC vehicle electrical systems. The 2-pin ATP plug provides a secure weatherproof connection. Suited to bull bar, nudge bar, and roof rack mounting on trucks, 4WDs, SUVs, and agricultural and industrial vehicles. The S52 Series is available in 13" (RBL5213SC), 30" (RBL5230SC), 40" (RBL5240SC), and 50" (RBL5250SC) lengths. Frequently Asked Questions Is the RBL5221SC compatible with 24V vehicles? Yes. The RBL5221SC operates across 10-30V DC, compatible with both 12V and 24V vehicle electrical systems. What connector does the RBL5221SC use? The RBL5221SC uses a 2-pin ATP plug for a secure, weatherproof, and vibration-resistant wiring connection. What is the IP rating of the RBL5221SC? IP68 and IP69K, confirming full protection against dust, sustained immersion, and high-pressure, high-temperature water jet exposure. How does the 21" compare to other S52 Series lengths? The RBL5221SC delivers 9560lm at 127W. For lower output see the RBL5213SC (13"). For higher output see the RBL5230SC (30"), RBL5240SC (40"), or RBL5250SC (50"). What mounting options suit the RBL5221SC? The RBL5221SC is suited to bull bar, nudge bar, and roof rack mounting on trucks, 4WDs, SUVs, and agricultural and industrial vehicles using the included end mount system and slide mounts.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RDL5700C Dominator Extreme 2 DX2 Series 7" LED Driving Light 133W Combination Beam A 7" 133W combination beam LED driving light from the Roadvision Dominator Extreme 2 (DX2) Series, the RDL5700C delivers 5,671 lumens per light (11,342lm per pair) with a beam distance of 1,383 metres at 0.5 lux per light (1,926m per pair) and 978 metres at 1 lux per light (1,383m per pair), powered by 24 x 6W Osram LEDs, featuring Thermal Management Technology, blackout mounting hardware, two protective covers, IP68 protection, 9-36V DC multi-volt input, and a 7-year warranty. Product Overview The Roadvision RDL5700C is a 7" combination beam driving light from the Dominator Extreme 2 (DX2) Series, engineered for long-range beam penetration focused on highway driving performance. The combination beam delivers seriously extreme long-range output reaching 978 metres at 1 lux per light (1,383m per pair) from a 7" unit. Twenty-four 6W Osram LEDs produce 133W of bright white light with 9,560 lux at 10 metres per light. Roadvision's Thermal Management Technology manages heat dissipation across the LED array for consistent output and long-term reliability. IP68 rated waterproof and dustproof die-cast aluminium housing with polycarbonate lens. Blackout mounting hardware with a lightweight aluminium mounting bracket. Two protective covers (clear and black) are included. Multi-volt 9-36V DC at 9.6A at 13.8V with over/under voltage and reverse polarity protection. CISPR25 approved. 2-pin Deutsch plug. 50,000 hour LED lifespan. Backed by a 7-year warranty. Features & Benefits 5,671 Lumens per Light - 978 Metres at 1 Lux: The RDL5700C delivers 5,671lm per light (11,342lm per pair) with 9,560 lux at 10 metres per light, 978m at 1 lux per light (1,383m per pair), and 1,383m at 0.5 lux per light (1,926m per pair) for exceptional long-range highway driving performance. 24 x 6W Osram LEDs - 133W Bright White Output: Twenty-four 6W Osram LEDs produce 133W of bright white light for natural colour rendering and maximum road surface visibility at long range. Combination Beam Focused on Long-Range Penetration: The DX2 Series combination beam is optimised for long-range beam penetration with a lower short-range intensity, making it the ideal choice for highway and open road driving rather than tight track or bush applications. Roadvision Thermal Management Technology: Actively manages heat dissipation across the 133W LED array for consistent output and long-term reliability across all operating environments. Blackout Mounting Hardware with Aluminium Bracket: All mounting hardware is finished in black with a lightweight aluminium mounting bracket, providing a modern, low-profile stealth appearance on the vehicle. Two Protective Covers Included - Clear and Black: Both a clear and a black protective cover are included, providing choice of cover style and additional lens protection when the driving lights are not in use. IP68 Water and Dust Proof: Full protection against sustained submersion, suited to off-road and all-weather applications. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight, tough construction for demanding applications. 50,000 Hour LED Lifespan with Solid-State Technology: Long-term maintenance-free reliability. Multi-Volt 9-36V DC with Over/Under Voltage and Reverse Polarity Protection: Compatible with 12V, 24V, and 36V electrical systems with full electronic protection. CISPR25 Approved: Confirmed compatible with vehicle communication and electronic systems without electromagnetic interference. 2-Pin Deutsch Plug: Secure, weatherproof, vibration-resistant connection. 7-Year Warranty: Backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RDL5700C Brand Roadvision Series Dominator Extreme 2 (DX2) Description DLX2 Series 7" LED Driving Light Beam Pattern Combination Maximum Lumens per Light 5,671lm Maximum Lumens per Pair 11,342lm Maximum Lux at 10m per Light 9,560lx Maximum Lux at 10m per Pair 19,120lx Beam Distance at 1lx per Light 978m Beam Distance at 1lx per Pair 1,383m Beam Distance at 0.5lx per Light 1,383m Beam Distance at 0.5lx per Pair 1,926m Input Voltage 9-36V DC Maximum Watts 133W LED Quantity 24 x 6W Osram Current Draw 9.6A at 13.8V Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring 2-Pin Deutsch Plug Dimensions 197mm x 80mm x 199mm IP Rating IP68 LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity Approvals CISPR25 Includes Clear Protective Cover, Black Protective Cover Warranty 7 Years Compatible With The RDL5700C is compatible with 9-36V DC vehicle electrical systems including 12V, 24V, and 36V platforms. The 2-pin Deutsch plug provides a secure weatherproof connection. Sold individually; pair figures refer to two units. A 9" version is available as the RDL5900C. Frequently Asked Questions Are the RDL5700C driving lights sold individually or as a pair? The RDL5700C is sold individually. Lumen, lux, and beam distance figures in brackets refer to a pair of two lights. What protective covers are included with the RDL5700C? Two protective covers are included: one clear cover and one black cover, providing a choice of cover style and additional lens protection when the driving lights are not in use. Is the RDL5700C compatible with 24V and 36V vehicles? Yes. The RDL5700C operates across 9-36V DC, compatible with 12V, 24V, and 36V vehicle electrical systems. What is the IP rating of the RDL5700C? IP68, confirming full protection against dust and sustained water submersion. What is the difference between the RDL5700C and the RDL5900C? Both are from the DX2 Series with the same design and technology. The RDL5700C is a 7" unit at 133W with 5,671lm and 978m at 1 lux per light using 24 x 6W LEDs. The RDL5900C is a 9" unit at 150W with 6,578lm and 1,200m at 1 lux per light using 33 x 6W LEDs. Choose the RDL5900C for maximum output and beam reach.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RBL7021SC Stealth S70 Series 21" LED Light Bar 176W Projector Combo Beam A 21" 176W projector combo beam LED light bar from the Roadvision Stealth S70 Series, the RBL7021SC delivers 11000 lumens with a beam distance of 1608 metres at 0.5 lux and 804 metres at 1 lux, powered by 40 x 3W Osram LEDs, featuring a smoked lens, blackout mounting hardware, Thermal Management Technology, IP68 and IP69K protection, and a 7-year warranty. Product Overview The Roadvision RBL7021SC is a 21" single row LED light bar from the Stealth S70 Series. Forty 3W Osram LEDs produce 176W in a projector combo beam combining 8 driving and 32 spot projectors, delivering 11000 lumens with 6461 lux at 10 metres, 804 metres at 1 lux, and 1608 metres at 0.5 lux. Smoked lens and blackout mounting hardware. Roadvision's Thermal Management Technology, IP68 and IP69K dual protection, multi-volt 10-30V DC at 7.7-16.8A at 13.8V, over/under voltage and reverse polarity protection, EMI/EMC radio interference approval, 2-pin ATP plug, 50,000 hour LED lifespan, and 7-year warranty. Features & Benefits 11000 Lumens - 1608 Metres at 0.5 Lux: Delivers 11000lm with 6461 lux at 10 metres, 804m at 1 lux, and 1608m at 0.5 lux for outstanding intensity and long-range beam penetration from a 21" bar. Projector Combo Beam - 8 Driving and 32 Spot Projectors: Combines 8 driving and 32 spot projectors for high-intensity output and exceptional long-range penetration. 40 x 3W Osram LEDs - 176W Super White Output: Forty 3W Osram LEDs for strong output performance. Smoked Lens and Blackout Mounting Hardware: Low-profile stealth appearance. Roadvision Thermal Management Technology: Consistent output and reliability. IP68 and IP69K Dual Protection: Full ingress protection. Die-Cast Aluminium Housing with Polycarbonate Lens: Tough, lightweight construction. 50,000 Hour LED Lifespan: Maintenance-free reliability. Multi-Volt 10-30V DC with Electronic Protection: 12V and 24V compatible. 2-Pin ATP Plug: Secure, weatherproof connection. 7-Year Warranty: Backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RBL7021SC Brand Roadvision Series Stealth S70 Description S70 Series 21" LED Light Bar Beam Type Projector Combo (8 Driving / 32 Spot) Maximum Lumens 11000lm Maximum Lux at 10m 6461lx Beam Distance at 1 Lux 804m Beam Distance at 0.5 Lux 1608m Maximum Watts 176W LED Quantity 40 x 3W Osram Current Draw 7.7-16.8A at 13.8V Input Voltage 10-30V DC Bar Length 21" (561mm) Dimensions 561mm x 67mm x 70mm Wiring 2-Pin ATP Plug IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Warranty 7 Years Compatible With The RBL7021SC is compatible with 10-30V DC vehicle electrical systems. Suited to bull bar and roof rack mounting. The S70 Series is available in 7" (RBL7007SC), 13" (RBL7013SC), 30" (RBL7030SC), 40" (RBL7040SC), and 52" (RBL7052SC) lengths. Frequently Asked Questions Is the RBL7021SC compatible with 24V vehicles? Yes. The RBL7021SC operates across 10-30V DC. What connector does the RBL7021SC use? 2-pin ATP plug. What is the IP rating of the RBL7021SC? IP68 and IP69K. How does the 21" S70 compare to the 21" S52? The RBL7021SC (S70) uses 40 x 3W LEDs at 176W with 11000lm and 804m at 1 lux. The RBL5221SC (S52) uses 15 x 10W LEDs at 127W with 9560lm and 544m at 1 lux. The S70 delivers greater lumen output and beam reach. How does the 21" compare to longer S70 Series bars? The RBL7021SC delivers 11000lm at 176W. For higher output see RBL7030SC, RBL7040SC, and RBL7052SC.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR392ARR LED Rear Combination Lamp Stop Tail Indicator and Reflector An ADR-approved LED rear combination lamp from the Roadvision BR392 Series, the BR392ARR features stop, tail, indicator, and integrated reflector functions with a sequential indicator, Grey Glowtech tail light, polycarbonate lens and housing, 10-30V DC multi-volt input, and 300mm tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR392ARR is a rear combination lamp from the BR392 Series, providing stop, tail, indicator, and integrated reflector functions in a single 390 x 105 x 39mm surface mount unit. The sequential indicator delivers a modern, sweeping activation sequence for enhanced road presence. The Grey Glowtech tail light provides a distinctive dynamic start-up effect. The integrated retro reflector boosts passive visibility. The mild tinted lens and gun metal grey chrome finish provide a premium, contemporary aesthetic. 118 LEDs across stop (40 LEDs), tail (54 LEDs), and indicator (24 LEDs) functions. Multi-volt 10-30V DC input with current draws of 0.27A for stop, 0.18A for tail, and 0.37A for indicator at 13.8V. Polycarbonate lens and housing with 185-225mm mounting hole centres. 300mm tinned copper pre-wired cable with earth (white), stop (red), tail (brown), indicator left (yellow), and indicator right (green) wires. ADR approved for all functions. CTA approval CTA-061826. 100,000 hour rated LED lifespan. Features & Benefits Sequential Indicator for Enhanced Road Presence: The sequential indicator delivers a sweeping activation sequence for a distinctive and modern appearance that enhances visibility and road presence. Grey Glowtech Tail Light: The Grey Glowtech tail light provides a dynamic start-up light sequence when the tail light activates, adding a distinctive visual signature. Stop, Tail, Indicator, and Integrated Reflector Functions: The BR392ARR combines stop, tail, indicator, and reflector functions in a single large combination lamp unit. Dual Indicator Wiring for Left and Right Channels: The BR392ARR includes separate indicator left (yellow) and indicator right (green) wires, confirming the lamp is designed as an all-in-one rear combination lamp covering both indicator directions in a single elongated unit. ADR Approved for All Functions: ADR approved and CTA certified CTA-061826 for all lamp functions. Multi-Volt 10-30V DC: Compatible with 12V and 24V vehicle and trailer electrical systems. Polycarbonate Lens and Housing: Lightweight, tough polycarbonate construction for long-term durability. Mild Tinted Lens and Gun Metal Grey Chrome Finish: Premium, contemporary aesthetic suited to modern trailer and vehicle applications. 100,000 Hour LED Lifespan with Solid-State Technology: Long-term maintenance-free performance. 300mm Tinned Copper Pre-Wired Cable: Corrosion-resistant tinned copper wiring with earth (white), stop (red), tail (brown), indicator left (yellow), and indicator right (green) wires. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR392ARR Brand Roadvision Series BR392 Description LED Rear Combination Lamp 10-30V Stop/Tail/Ind/Ref Glowtech Tail 390x105x39mm Functions Stop, Tail, Indicator, Reflector Indicator Type Sequential Tail Light Grey Glowtech LED Quantity - Indicator 24 LEDs LED Quantity - Stop 40 LEDs LED Quantity - Tail 54 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.37A at 13.8V Current Draw - Stop 0.27A at 13.8V Current Draw - Tail 0.18A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Finish Mild Tinted Lens, Gun Metal Grey Chrome Mounting Hole Centres 185-225mm Overall Dimensions 390mm x 105mm x 39mm Cable Length 300mm Tinned Copper Wiring Earth - White, Stop - Red, Tail - Brown, Indicator Left - Yellow, Indicator Right - Green CTA Approval CTA-061826 ADR Approved Yes (all functions) LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR392ARR is compatible with 10-30V DC trailer and vehicle electrical systems. ADR approved for all functions. Confirm mounting dimensions and wiring requirements for your specific application before purchase. A version with reverse function is available as the BR392ARW. Frequently Asked Questions Is the BR392ARR ADR approved? Yes. The BR392ARR is ADR approved for all functions and holds CTA approval CTA-061826. What is the Grey Glowtech tail light on the BR392ARR? The Grey Glowtech tail light is a dynamic start-up light sequence that activates each time the tail light powers on, providing a distinctive visual signature and enhanced rear visibility. What is the sequential indicator on the BR392ARR? The sequential indicator delivers a sweeping activation sequence rather than a standard simultaneous flash, providing a modern and distinctive indicator appearance that enhances road presence and visibility. Does the BR392ARR have separate left and right indicator wires? Yes. The BR392ARR includes separate indicator left (yellow) and indicator right (green) wires, confirming it is designed as a full-width rear combination lamp covering both left and right indicator functions in a single unit. What is the difference between the BR392ARR and the BR392ARW? The BR392ARR provides stop, tail, indicator, and reflector functions. The BR392ARW adds a reverse function with a dedicated black reverse wire, making it suited to applications requiring an integrated reverse lamp. Both share the same dimensions, sequential indicator, Grey Glowtech tail, polycarbonate construction, and multi-volt input.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR15B LED Licence Plate Lamp Black Body 10-30V An ADR-approved LED licence plate lamp from the Roadvision BR15 Series, the BR15B features 3 white LEDs, a high-impact black ABS housing, polycarbonate lens, 10-30V DC multi-volt input, surface and bracket mount options, and a 300mm sheathed tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR15B is a LED licence plate lamp from the BR15 Series, designed as a fit-and-forget replacement for incandescent licence plate lamps. Three white LEDs provide bright licence plate illumination while drawing only 0.05A at 13.8V, significantly less than equivalent incandescent lamps. The high-impact black ABS housing with sealed polycarbonate lens is waterproof, dustproof, vibration-proof, and shock-proof with a rated LED lifespan of 100,000 hours. The 90 x 24 x 25mm lamp mounts via surface or bracket mount with a 75.9mm mounting hole cutout and is pre-wired with a 300mm sheathed tinned copper cable. Multi-volt 10-30V DC input is compatible with 12V and 24V electrical systems. ADR approved (CRN 48416) and CTA approved (CTA-048416). Backed by a 5-year warranty. Features & Benefits ADR and CTA Approved: The BR15B holds ADR approval (CRN 48416) and CTA approval (CTA-048416), confirming compliance with Australian road requirements for licence plate lamp applications. 3 White LEDs - Bright Licence Plate Illumination: Three white LEDs provide bright and even licence plate illumination while drawing only 0.05A at 13.8V, a fraction of the current drawn by equivalent incandescent lamps. Black High-Impact ABS Housing: The black high-impact ABS housing provides a durable, impact-resistant construction suited to trailer and vehicle exterior applications. Sealed Polycarbonate Lens: The unbreakable polycarbonate lens provides long-term durability, resistance to impact and UV degradation, and a watertight seal. Waterproof, Dustproof, Vibration-Proof, and Shock-Proof: The fully sealed construction protects the lamp from water, dust, vibration, and shock in all trailer and vehicle operating environments. 100,000 Hour LED Lifespan - Fit and Forget: The 100,000 hour rated LED lifespan with maintenance-free solid-state technology provides long-term reliability with no bulb replacements required. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. Surface and Bracket Mount with 75.9mm Cutout: The BR15B can be surface mounted or bracket mounted with a 75.9mm mounting hole cutout for flexible installation in trailer and vehicle number plate positions. 300mm Sheathed Tinned Copper Pre-Wired Cable: The 300mm sheathed tinned copper pre-wired cable provides a corrosion-resistant connection to the trailer or vehicle wiring harness. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR15B Brand Roadvision Series BR15 Description Licence Plate Lamp Black Body Function Licence Plate Lamp LED Quantity 3 White LEDs Input Voltage 10-30V DC Current Draw 0.05A at 13.8V Lens Construction Polycarbonate Housing Construction High-Impact ABS Housing Colour Black Dimensions 90mm x 24mm x 25mm Mount Type Surface/Bracket Mount Mounting Hole/Cutout 75.9mm Cable Length 300mm Sheathed Tinned Copper ADR Approval CRN 48416 CTA Approval CTA-048416 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR15B is compatible with 10-30V DC trailer and vehicle electrical systems. ADR and CTA approved for licence plate lamp applications. Confirm mounting cutout dimensions (75.9mm) against your specific trailer or vehicle panel before purchase. A chrome body version is available as the BR15C. Frequently Asked Questions Is the BR15B ADR approved for on-road use? Yes. The BR15B is ADR approved (CRN 48416) and CTA approved (CTA-048416), confirming compliance with Australian road requirements for licence plate lamp applications. Is the BR15B compatible with 24V systems? Yes. The BR15B operates across 10-30V DC, compatible with both 12V and 24V vehicle and trailer electrical systems. What is the LED lifespan of the BR15B? The BR15B has a rated LED lifespan of 100,000 hours with maintenance-free solid-state technology, eliminating bulb replacements over the service life of the lamp. What is the difference between the BR15B and the BR15C? Both are identical in specifications, approvals, LED count, dimensions, and electrical ratings. The BR15B has a black high-impact ABS housing. The BR15C has a chromed high-impact ABS housing. Choose based on the aesthetic preference for your trailer or vehicle application. What mounting cutout does the BR15B require? The BR15B requires a 75.9mm mounting hole cutout for bracket mount installation. It can also be surface mounted. Confirm the mounting method and cutout dimensions against your specific application before purchase.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RWL7924C Sidewinder LED Work Light 24W Combo Beam A square 24W combo beam LED work lamp from the Roadvision Sidewinder RWL7 Series, the RWL7924C combines 9 x 1.6W Osram spot LEDs with 6 side angled 1.6W Osram Sidewinder LEDs for a 115-degree spread beam, producing 1500 effective lumens with 10-30V DC multi-volt input, IP67 rating, die-cast aluminium housing, polycarbonate lens, 2-pin Deutsch plug wiring, and a 5-year warranty. Product Overview The Roadvision RWL7924C is a Sidewinder combo LED work lamp offering uncompromised spot and spread performance from a single lamp. Nine 1.6W Osram long range spot LEDs are paired with six unique side angled 1.6W Osram Sidewinder LEDs delivering a 115-degree spread beam, resulting in the perfect combination of spot and flood without the need to install two separate lamps. The combo beam produces 1500 effective lumens rated at 122 lux at 10 metres from a compact 97 x 73 x 89mm square body. Water and dust proof to IP67, the RWL7924C features a super durable, lightweight die-cast aluminium housing and polycarbonate lens, allowing for worry-free operation in even the toughest conditions. The multi-volt 10-30V DC input draws a super low 1.8 amps at 13.8V, and solid-state technology delivers a 50,000 hour LED lifespan. Installation is a simple 2-wire connection via the 2-pin Deutsch plug, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. Features & Benefits Spot and Flood from One Lamp: The Sidewinder design pairs long range spot LEDs with side angled flood LEDs, delivering the perfect combination of spot and spread without installing two separate lamps. 9 x 1.6W Osram Spot LEDs: Nine 1.6W Osram LEDs provide the long range spot element of the combo beam, rated at 122 lux at 10 metres. 6 Side Angled Sidewinder LEDs - 115-Degree Spread: Six unique side angled 1.6W Osram LEDs deliver a 115-degree spread beam, filling the periphery around the spot for complete work area coverage. 1500 Effective Lumens of Instant Light: The RWL7924C produces 1500 effective lumens of instant light output for its compact 24W package. 50,000 Hour LED Lifespan: Solid-state technology delivers a 50,000 hour LED lifespan for maintenance-free performance over the long service life typical of 4WD, work vehicle, and machinery applications. IP67 Water and Dust Proof: The RWL7924C is water and dust proof to IP67, allowing worry-free operation in wet, muddy, and dusty conditions. Die-Cast Aluminium Housing with Polycarbonate Lens: The super durable, lightweight die-cast aluminium housing and polycarbonate lens provide reliability in even the toughest conditions. Multi-Volt 10-30V DC with Super Low Current Draw: The 10-30V DC multi-volt input draws just 1.8 amps at 13.8V, making the RWL7924C compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. Simple 2-Wire Installation with Deutsch Plug: The 2-pin Deutsch plug and simple 2-wire installation make for a quick, professional connection, with over/under voltage protection, reverse polarity protection, and EMI/EMC radio interference approval built in. 5-Year Warranty: The RWL7924C is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RWL7924C Brand Roadvision Series Sidewinder RWL7 Description Sidewinder Work Lamp LED 24W Square Beam Type Combo Beam (Spot with 115° Spread) Lumens Light Output (Effective) 1500lm Power 24W Light Source 9 x 1.6W Osram Spot LEDs plus 6 x 1.6W Osram Side Angled LEDs Lux at 10m 122 Lux Input Voltage 10-30V DC Current Draw 1.8A at 13.8V DC Lens Polycarbonate Housing Die-Cast Aluminium IP Rating IP67 Wiring 2 Pin Deutsch Plug Dimensions 97 x 73 x 89mm LED Lifespan 50,000 Hours Warranty 5 Years Compatible With The RWL7924C is compatible with 10-30V DC vehicle electrical systems, covering both 12V and 24V vehicles. The Sidewinder RWL7 Series is also available as the 29W RWL7429C with 4 x 5W Osram P8 spot LEDs, and the 55W RWL7955C with 9 x 5W Osram LEDs and Thermal Management Technology. Confirm mounting space and wiring access before purchase. Frequently Asked Questions What makes the Sidewinder design different from a standard work light? The RWL7924C pairs 9 long range spot LEDs with 6 unique side angled LEDs delivering a 115-degree spread beam, giving spot and flood performance from a single lamp without installing two separate lights. How bright is the RWL7924C? The RWL7924C produces 1500 effective lumens of instant light output, rated at 122 lux at 10 metres through its combo beam. Is the RWL7924C compatible with 24V vehicles? Yes. The RWL7924C operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. Is the RWL7924C waterproof? Yes. The RWL7924C is water and dust proof to IP67, with a die-cast aluminium housing and polycarbonate lens built for worry-free operation in tough conditions. What is the difference between the RWL7924C and RWL7429C? Both share the same 97 x 73 x 89mm body and 6 side angled Sidewinder LEDs. The RWL7924C runs 9 x 1.6W Osram spot LEDs at 24W producing 1500 lumens and 122 lux at 10 metres, while the RWL7429C runs 4 x 5W Osram P8 spot LEDs at 29W producing 2100 lumens and 490 lux at 10 metres for more long range punch.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RLB250Y Revolver LED Micro Light Bar Amber Fixed Mount A low profile 360-degree high intensity amber LED micro light bar from the Roadvision Revolver RLB250 Series, the RLB250Y features 40 SMD LEDs producing 20W, 10 selectable flash patterns, IP67 waterproof and vibration proof rating, polycarbonate lens and housing, 10-30V DC multi-volt operation, single bolt fixed mounting, EMC, ECE R65/R10 and SAE Class 1 approvals, and a 5-year warranty. Product Overview The Roadvision RLB250Y is a fixed mount micro light bar from the Revolver RLB250 Series, the pinnacle in vehicle roof top emergency lighting. Featuring 360-degree high intensity LEDs and 10 selectable flash patterns, the RLB250Y provides high penetration, high level lighting from a truly compact yet robust package, with the compact low profile 251 x 170 x 56mm body sitting neatly on utes, service vehicles, and plant machinery. Forty SMD LEDs produce 20W of high intensity amber output with a 100,000 hour rated LED lifespan and maintenance-free solid-state technology, drawing just 1.6A at 13.8V from the multi-volt 10-30V DC input. The tough polycarbonate lens and housing are waterproof to IP67 and vibration proof, ensuring vehicle visibility through dust, mist, or fog in even the toughest conditions. The RLB250Y mounts via a single M12 x 30mm bolt, is pre-wired with a 300mm sheathed cable, and holds EMC, ECE R65/R10, and SAE J845 Class 1 approvals. Features & Benefits Low Profile 360-Degree Micro Light Bar: The RLB250Y delivers 360-degree high intensity amber output from a compact 251 x 170 x 56mm low profile body, providing high penetration, high level warning lighting without the bulk of a full size bar. 40 SMD LEDs - 20W Output - 100,000 Hour Lifespan: Forty SMD LEDs produce 20W of output with a 100,000 hour rated lifespan and maintenance-free solid-state technology, outlasting halogen and xenon strobe alternatives. 10 Selectable Flash Patterns: Ten selectable flash patterns cover single, strobe, triple, simulated rotating, and combination sequences, allowing the RLB250Y to be configured for the specific application and regulatory requirements. EMC, ECE R65/R10 and SAE Class 1 Approved: The RLB250Y holds EMC, ECE R65/R10, and SAE J845 Class 1 approvals, confirming compliance with electromagnetic compatibility and emergency vehicle lighting intensity requirements for on-road and industrial use. Tough Polycarbonate Lens and Housing: The polycarbonate lens and housing provide a weatherproof, high performance construction with no maintenance required in demanding field, construction, and emergency vehicle environments. IP67 Waterproof and Vibration Proof: IP67 rating provides full dust and waterproof protection, and the vibration proof construction ensures reliable operation on rough terrain and heavy equipment applications. Multi-Volt 10-30V DC with Low Current Draw: The 10-30V DC multi-volt input with a current draw of just 1.6A at 13.8V makes the RLB250Y compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. Single Bolt Fixed Mount: The RLB250Y mounts via a single M12 x 30mm bolt, providing a permanent and secure installation to vehicle roof panels and mounting brackets. 300mm Sheathed Pre-Wired Cable: The 300mm sheathed pre-wired cable provides a protected and professional wiring connection between the light bar and the vehicle wiring harness. 5-Year Warranty: The RLB250Y is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU RLB250Y Brand Roadvision Series Revolver RLB250 Description Low Profile Micro Bar LED 10-30V 10 Flash Patterns Amber Fixed Mount Function 10 Selectable Flash Patterns Light Source 40 SMD LEDs Power Output 20W Input Voltage 10-30V DC Current Draw 1.6A at 13.8V Dimensions 251 x 170 x 56mm Mounting Type Single Bolt M12 x 30mm Fixed Mount Wiring 300mm Sheathed Lens Polycarbonate Housing Polycarbonate IP Rating IP67 Vibration Proof Yes Approvals EMC, ECE R65/R10 and SAE J845 Class 1 LED Lifespan 100,000 Hours Warranty 5 Years Flash Patterns Number Pattern 1 Single (ECE/SAE) 480ms 2 Strobe 3 Combination (Middle Triple, Both Side Triple) 4 Rotated 5 Combination (1-5) 6 Combination (1-3-5) 7 Triple 8 Combination (Middle Triple, Both Side Triple, All Triple) 9 Combination (Front Triple, Middle Triple, All Triple) 10 Combination (Middle Triple, Left and Right Triple, Front Triple, Middle Triple, Back Triple, All Triple) Compatible With The RLB250Y is compatible with 10-30V DC vehicle electrical systems, covering both 12V and 24V vehicles, and holds EMC, ECE R65/R10, and SAE J845 Class 1 approvals for on-road and industrial use. The RLB250 Series is also available in a magnetic mount version (RLB250MY) with a 2.5m lead and cigarette plug for temporary installations. Confirm roof mounting position and the single bolt M12 x 30mm fixing before purchase. Frequently Asked Questions How many flash patterns does the RLB250Y have? The RLB250Y has 10 selectable flash patterns covering single (ECE/SAE 480ms), strobe, triple, simulated rotating, and a range of combination sequences. Is the RLB250Y SAE Class 1 approved? Yes. The RLB250Y holds EMC, ECE R65/R10, and SAE J845 Class 1 approvals, confirming compliance with emergency vehicle lighting intensity requirements for on-road and industrial use. Is the RLB250Y compatible with 24V vehicles? Yes. The RLB250Y operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. What is the difference between the RLB250Y and RLB250MY? Both share the same 40 SMD LEDs, 10 flash patterns, and approvals. The RLB250Y is the fixed mount version with a single M12 x 30mm bolt, 56mm body height, and 300mm sheathed cable, while the RLB250MY is the magnetic mount version with a 41mm body height and 2.5m lead with cigarette plug for temporary use. What is the rated lifespan of the RLB250Y LEDs? The RLB250Y has a rated LED lifespan of 100,000 hours with maintenance-free solid-state technology, outlasting halogen and xenon strobe alternatives.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RDL6701LKD Stealth PRO Low Kelvin Series 7" LED Driving Light 74W Combination Beam A 7" 74W combination beam LED driving light from the Roadvision Stealth PRO Low Kelvin Series, the RDL6701LKD delivers 4,601 lumens per light (9,202lm per pair) with a beam distance of 369 metres at 1 lux per light (522m per pair), powered by 16 x 3W Osram LEDs, featuring a warmer low-kelvin light output with wider beam pattern for improved visibility in wet and dusty conditions, dynamic start-up DRL, Thermal Management Technology, IP68 and IP69K protection, and a 7-year warranty. Product Overview The Roadvision RDL6701LKD is a 7" combination beam driving light from the Stealth PRO Low Kelvin Series, designed for smaller SUVs and passenger vehicles where a warmer light colour and wider beam pattern provide better visibility in wet and dusty conditions while dramatically reducing road sign flare. Sixteen 3W Osram LEDs produce 74W at a warmer low-kelvin colour temperature, delivering 4,601lm per light with 1,365 lux at 10 metres per light and a beam reach of 369 metres at 1 lux per light (522m per pair). The contemporary bezel-less design with dynamic start-up DRL housed in a dedicated DRL window in the included black protective cover provides a modern, sleek appearance. The DRL seamlessly darkens when not illuminated. Blackout mounting hardware. Roadvision's Thermal Management Technology manages heat dissipation for consistent output and long-term reliability. IP68 and IP69K dual protection. Multi-volt 10-30V DC at 5.3A at 13.8V with over/under voltage and reverse polarity protection. EMI/EMC radio interference approved. 2-pin Deutsch plug for driving light circuit (red positive, black negative) with separate green wire for DRL halo positive. 50,000 hour LED lifespan. Backed by a 7-year warranty. Features & Benefits 4,601 Lumens per Light - 369 Metres at 1 Lux: Delivers 4,601lm per light (9,202lm per pair) with 1,365 lux at 10 metres per light and 369m at 1 lux per light (522m per pair), providing effective forward illumination for SUV and passenger vehicle applications. Low Kelvin Warmer Light Output - Wider Beam Pattern: The Low Kelvin colour temperature and wider beam pattern provide better visibility in wet and dusty conditions compared to standard white driving lights, while dramatically reducing road sign flare - making this series ideal for use on public roads in varying conditions. 16 x 3W Osram LEDs - 74W Output: Sixteen 3W Osram LEDs produce 74W of warmer-toned output suited to on-road driving conditions and passenger vehicle use. Dynamic Start-Up DRL with Black Cover and DRL Window: The Stealth PRO Low Kelvin Series features a dynamic start-up DRL housed in a dedicated DRL window in the black protective cover. The DRL seamlessly darkens when not in use for a clean bezel-less appearance. Blackout Mounting Hardware: All mounting hardware is finished in black for a modern, low-profile stealth appearance. Roadvision Thermal Management Technology: Actively manages heat dissipation from the LED array for consistent output and long-term reliability across all operating environments. IP68 and IP69K Dual Protection: Full protection against sustained immersion and high-pressure, high-temperature water jet exposure, suited to all-weather driving applications. Die-Cast Aluminium Housing with Polycarbonate Lens: Lightweight, tough construction for demanding vehicle applications. 50,000 Hour LED Lifespan with Solid-State Technology: Long-term maintenance-free reliability. Multi-Volt 10-30V DC with Over/Under Voltage and Reverse Polarity Protection: Compatible with 12V and 24V vehicle electrical systems with full electronic protection. EMI/EMC Radio Interference Approved: Compatible with vehicle communication and navigation systems without interference. 2-Pin Deutsch Plug with Separate DRL Halo Wire: 2-pin Deutsch plug for driving light power (red positive, black negative) with separate green wire for DRL halo positive. 7-Year Warranty: Backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RDL6701LKD Brand Roadvision Series Stealth PRO Low Kelvin Description 7" LED Driving Light 10-30V Round 74W Combination Beam Beam Pattern Combination Maximum Lumens per Light 4,601lm Maximum Lumens per Pair 9,202lm Maximum Lux at 10m per Light 1,365lx Maximum Lux at 10m per Pair 2,730lx Beam Distance at 1lx per Light 369m Beam Distance at 1lx per Pair 522m Input Voltage 10-30V DC Maximum Watts 74W LED Quantity 16 x 3W Osram Current Draw 5.3A at 13.8V Lens Construction Polycarbonate Housing Construction Die-Cast Aluminium Wiring - Driving Light 2-Pin Deutsch Plug (Red +Ve, Black -Ve) Wiring - DRL Halo Green Wire +Ve Dimensions 192mm x 78mm x 195mm IP Rating IP68 and IP69K LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity EMI/EMC Radio Interference Approved Includes Black Protective Cover with DRL Window Warranty 7 Years Compatible With The RDL6701LKD is compatible with 10-30V DC vehicle electrical systems including 12V and 24V platforms. Sold individually; pair figures refer to two units. A 9" version is available as the RDL6901LKD. The standard white output version in the same form factor is the RDL6701SD (Stealth PRO Series). Frequently Asked Questions Are the RDL6701LKD driving lights sold individually or as a pair? The RDL6701LKD is sold individually. Lumen, lux, and beam distance figures in brackets refer to a pair of two lights. What is the advantage of a Low Kelvin driving light over a standard white driving light? The Low Kelvin series features a warmer colour temperature and wider beam pattern compared to the standard Stealth PRO Series. This provides better contrast and visibility in wet and dusty conditions where standard white lights can cause glare and reflection, while also dramatically reducing road sign flare on public roads. Is the RDL6701LKD suitable for everyday on-road use? Yes. The Low Kelvin series is specifically designed for SUVs and passenger vehicles on public roads, where the warmer light and wider beam pattern provide better on-road visibility in varying conditions compared to standard high-intensity white driving lights. Is the RDL6701LKD compatible with 24V vehicles? Yes. The RDL6701LKD operates across 10-30V DC, compatible with both 12V and 24V vehicle electrical systems. What is the difference between the RDL6701LKD and the RDL6701SD? Both are 7" Stealth PRO Series driving lights with the same form factor, DRL, and mounting hardware. The RDL6701SD uses the standard white output at higher lumen output (5,130lm per light) for maximum long-range performance. The RDL6701LKD uses a warmer Low Kelvin output with a wider beam pattern optimised for on-road visibility in wet, dusty, and road sign-heavy conditions.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR601ARW LED Jumbo Combination Lamp Stop Tail Ind Reverse A triple module LED jumbo combination lamp from the Roadvision BR601 Series, the BR601ARW combines stop, tail, indicator, and reverse functions with an integrated reflector, 10-30V DC multi-volt input, sealed polycarbonate lenses on a high impact ABS housing, a 100,000 hour rated LED lifespan, ADR/ECE approval for all functions, and a 5-year warranty. Product Overview The Roadvision BR601ARW is a complete heavy duty all-in-one rear lighting solution for trucks and trailers, packing stop/tail, indicator, reverse, and reflector functions into a single 604 x 132 x 41mm jumbo lamp. Each function runs 24 LEDs, producing more light output than incandescent lamps while drawing a fraction of the current, at just 0.1A for the indicator, 0.1/0.05A for stop/tail, and 0.2A for reverse at 13.8V. The unbreakable sealed polycarbonate lenses and extremely tough high impact ABS housing are dust and water proof and totally maintenance free, with a 100,000 hour rated LED lifespan from solid-state technology. The simple surface mount design retro-fits in place of existing jumbo lamps on 501mm and 325mm mounting hole centres, and the lamp is supplied pre-wired with a 300mm LEDLink connector. All functions are ADR/ECE approved. With Roadvision it's fit and forget. Features & Benefits All-In-One Heavy Duty Combination Lamp: The BR601ARW combines stop/tail, indicator, reverse, and reflector functions in one triple module jumbo lamp, replacing multiple separate lamps on the rear of trucks and trailers. Retro-Fits Existing Jumbo Lamps: The simple surface mount design retro-fits in place of existing jumbo combination lamps, making it a straightforward LED upgrade for heavy vehicles. More Light, Less Current: The BR601 Series produces more light output than conventional incandescent systems while drawing a fraction of the current, with 24 LEDs per function. 100,000 Hour Rated LED Lifespan: Solid-state LED technology delivers a 100,000 hour rated lifespan for totally maintenance-free operation over the life of the vehicle. Unbreakable Polycarbonate Lenses and High Impact ABS Housing: The sealed polycarbonate lenses and extremely tough high impact ABS housing are dust and water proof, built for heavy duty road exposure. Multi-Volt 10-30V DC Input: The 10-30V DC multi-volt input makes the BR601ARW compatible with both 12V and 24V vehicle electrical systems without a voltage adaptor. ADR/ECE Approved for All Functions: The indicator, stop, tail, and reverse functions are all ADR/ECE approved for legal on-road use in Australia. Pre-Wired with LEDLink Connector: The lamp is supplied pre-wired with a 300mm LEDLink connector for a quick, tidy connection to the vehicle harness. 5-Year Warranty: The BR601ARW is backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR601ARW Brand Roadvision Series BR601 Combination Description Rect Stop/Tail/Ind/Rev Lamp Triple Module Functions Stop/Tail, Indicator, Reverse and Reflector Voltage Input 10-30V DC Number of LEDs Indicator - 24 LEDs, Stop/Tail - 24 LEDs, Reverse - 24 LEDs Current Draw Indicator - 0.1A, Stop/Tail - 0.1/0.05A, Reverse - 0.2A at 13.8V Dimensions 604 x 132 x 41mm Lens Polycarbonate Housing ABS High Impact Ingress Protection Water and Dust Proof Mounting Type Surface Mount Mounting Hole Centres 501mm and 325mm Cable 300mm with LEDLink Connector ADR Approval Indicator - CRN 46082, Stop - CRN 46121, Tail - CRN 46120, Reverse - CRN 46122 CTA Approval CTA-060773 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR601ARW is compatible with 10-30V DC electrical systems, covering both 12V and 24V trucks and trailers, and is ADR/ECE approved for all functions for on-road use in Australia. The surface mount design retro-fits in place of existing jumbo lamps. The BR601 Series is also available as a twin module stop/tail/indicator (BR601AR) and a triple module with double stop/tail (BR601ARR). Confirm the 604mm lamp length and 501mm/325mm mounting hole centres fit your intended location before purchase. Frequently Asked Questions What functions does the BR601ARW include? The BR601ARW combines stop/tail, indicator, and reverse functions with an integrated reflector in a single triple module jumbo lamp, with 24 LEDs per function. Is the BR601ARW ADR approved? Yes. All functions are ADR/ECE approved, with indicator CRN 46082, stop CRN 46121, tail CRN 46120, reverse CRN 46122, and CTA approval CTA-060773. Is the BR601ARW compatible with 24V trucks? Yes. The BR601ARW operates across 10-30V DC, making it compatible with both 12V and 24V vehicle electrical systems. Can the BR601ARW replace my existing jumbo lamp? Yes. The simple surface mount design retro-fits in place of existing jumbo combination lamps, with 501mm and 325mm mounting hole centres. Confirm your existing mounting positions before purchase. What is the difference between the BR601ARW and BR601ARR? Both are 604mm triple module lamps. The BR601ARW uses its third module for a reverse function, while the BR601ARR uses it for a second stop/tail module with 48 stop/tail LEDs in total.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision RBL5220C DC2 Series 22" Dual Row LED Light Bar 120W Combo Beam A 22" 120W dual row combo beam LED light bar from the Roadvision DC2 Series, the RBL5220C delivers 10800 lumens with a beam distance of 787 metres at 0.5 lux and 394 metres at 1 lux, powered by 40 x 3W Osram Hi-Lux LEDs, featuring soft start and advanced Thermal Management Technology, IP67 protection, 9-position adjustable anti-vibration end mounts, low-profile slide mounts, and a 7-year warranty. Product Overview The Roadvision RBL5220C is a 22" dual row LED light bar from the DC2 Series. Forty 3W Osram Hi-Lux LEDs produce 120W of super-white daylight-close output in a combo beam pattern, delivering 10800 lumens with 1549 lux at 10 metres, 394 metres at 1 lux, and 787 metres at 0.5 lux. The ultra-slim 65mm deep housing provides greater mounting flexibility. Soft start and advanced Thermal Management Technology. IP67 waterproof and dustproof. Multi-volt 10-30V DC at 6.7A at 13.8V. 2-pin Deutsch plug. 9-position adjustable anti-vibration end mount system and low-profile slide mounts. 50,000 hour LED lifespan. Backed by a 7-year warranty. Features & Benefits 10800 Lumens - 787 Metres at 0.5 Lux: Delivers 10800lm with 1549 lux at 10 metres, 394m at 1 lux, and 787m at 0.5 lux for strong mid-range dual row light bar performance. 40 x 3W Osram Hi-Lux LEDs - 120W: Dual row configuration with 40 x 3W Osram Hi-Lux LEDs for high-intensity output from a 22" bar. Soft Start and Advanced Thermal Management Technology: Reduces LED stress on power-on and maintains consistent output and reliability. Ultra-Slim 65mm Deep Housing: Greater mounting flexibility in tight mounting positions. 9-Position Adjustable Anti-Vibration End Mount and Slide Mounts: Precise beam direction and vibration-resistant installation. IP67 Water and Dust Proof: Full protection against dust and temporary immersion. Multi-Volt 10-30V DC with Electronic Protection: Compatible with 12V and 24V systems. 2-Pin Deutsch Plug: Secure, weatherproof connection. 7-Year Warranty: Backed by a 7-year Roadvision warranty. Technical Specs Specification Detail SKU RBL5220C Brand Roadvision Series DC2 Description DC2 Series 22" Bar 40 LED Beam Type Combo Beam Lumen Output 10800lm Lux at 10m 1549lx Beam Distance at 1 Lux 394m Beam Distance at 0.5 Lux 787m Total Watts 120W LED Quantity 40 x 3W Osram Hi-Lux Input Voltage 10-30V DC Current Draw 6.7A at 13.8V Bar Length 22" (563mm) Dimensions 563mm x 65mm x 78.5mm Wiring 2-Pin Deutsch Plug IP Rating IP67 LED Lifespan 50,000 Hours Protection Over/Under Voltage, Reverse Polarity, Soft Start EMI/EMC Radio Interference Approved Mounts 9-Position Anti-Vibration End Mount and Slide Mounts Warranty 7 Years Compatible With The RBL5220C is compatible with 10-30V DC vehicle electrical systems. The DC2 Series is available in 8" (RBL5080C), 14" (RBL5140C), 32" (RBL5320C), 42" (RBL5420C), and 50" (RBL5500C) lengths. Frequently Asked Questions Is the RBL5220C compatible with 24V vehicles? Yes. The RBL5220C operates across 10-30V DC. What connector does the RBL5220C use? 2-pin Deutsch plug. What is the IP rating of the RBL5220C? IP67. How does the 22" compare to other DC2 lengths? The RBL5220C delivers 10800lm at 120W. For lower output see RBL5080C and RBL5140C; for higher output see RBL5320C, RBL5420C, and RBL5500C. What mounting system is included? The 9-position adjustable anti-vibration end mount system and low-profile slide mounts are included.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less