Roadvision BR280ARW LED Combination Lamp Stop Tail Sequential Indicator Reverse Fog and Reflector An ADR-approved LED rectangle combination lamp from the Roadvision BR280 Series, the BR280ARW features stop, tail, sequential indicator, reverse, fog, and integrated reflector functions with polycarbonate lens and housing, 10-30V DC multi-volt input, surface or twin bolt mount, and a 500mm sheathed pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR280ARW is a rear combination lamp from the BR280 Series, providing the most complete rear lamp function set in the BR280 range: stop, tail, sequential indicator, reverse, fog, and integrated retro reflector in a single 283 x 100 x 29mm surface mount unit. The progressive sequential indicator flashes in a sweeping sequence for enhanced visibility and road safety. Polycarbonate lens and housing are IP67 waterproof and dustproof with a 100,000 hour rated LED lifespan. LED count covers indicator (24 LEDs), stop/tail (14 LEDs), reverse (12 LEDs), and fog (14 LEDs) functions. Current draw at 13.8V is 0.2A for indicator, 0.2A/0.05A for stop/tail, 0.2A for reverse, and 0.3A for fog. Surface mount with 116mm mounting hole centre, or twin rear stud mount for horizontal and vertical mounting surfaces. Pre-wired with a 500mm sheathed cable. ADR and ECE approved with individual approval numbers for each function. CTA approval CTA-060819. Backed by a 5-year warranty. Features & Benefits Sequential Indicator for Enhanced Safety: The progressive sequential indicator flashes in a sweeping sequence rather than a standard simultaneous flash, providing increased visibility and a modern, distinctive appearance that enhances road safety. Complete 5-Function Combination Lamp: The BR280ARW combines stop, tail, sequential indicator, reverse, fog, and integrated reflector functions in a single compact unit, providing a complete rear lamp solution without requiring multiple separate lamp assemblies. ADR and ECE Approved for All Functions: Individual ECE approval numbers for indicator (2a-E9-01 16532), stop/tail (R1-S1-E9-02 16532), reverse (AR-E9-00 16532), fog (F1-E9-00 16532), and reflector (IB-E9-02 16532), plus CTA approval CTA-060819, confirming compliance with Australian and international road safety requirements for all lamp functions. Integrated Retro Reflector: The retro reflector is integrated directly into the lens, providing passive rear visibility without requiring a separate reflector unit. Polycarbonate Lens and Housing - IP67 Rated: Sealed polycarbonate construction on both lens and housing provides IP67 waterproof and dustproof protection for all exterior trailer and vehicle mounting locations. Multi-Fit Surface or Twin Bolt Mount: The BR280ARW can be installed via simple surface mount with a 116mm mounting hole centre, or via twin rear stud bolt mount for horizontal or vertical mounting surfaces, providing flexibility for different trailer and vehicle rear panel configurations. Multi-Volt 10-30V DC: Compatible with both 12V and 24V vehicle and trailer electrical systems. 100,000 Hour LED Lifespan - Fit and Forget: The 100,000 hour rated LED lifespan with maintenance-free solid-state technology provides long-term reliability with no bulb replacements required. 500mm Sheathed Pre-Wired Cable: The 500mm sheathed pre-wired cable provides a protected and reliable connection to the trailer or vehicle wiring harness. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR280ARW Brand Roadvision Series BR280 Description Rectangle Stop/Tail/Ref Sequential Indicator Combination Functions Stop, Tail, Sequential Indicator, Reverse, Fog, Reflector LED Quantity - Indicator 24 LEDs LED Quantity - Stop/Tail 14 LEDs LED Quantity - Reverse 12 LEDs LED Quantity - Fog 14 LEDs Input Voltage 10-30V DC Current Draw - Indicator 0.2A at 13.8V Current Draw - Stop 0.2A at 13.8V Current Draw - Tail 0.05A at 13.8V Current Draw - Reverse 0.2A at 13.8V Current Draw - Fog 0.3A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 283mm x 100mm x 29mm Mounting Type Surface Mount or Twin Bolt Mount Mounting Hole Centre 116mm Cable Length 500mm Sheathed IP Rating IP67 ECE Indicator Approval 2a-E9-01 16532 ECE Stop/Tail Approval R1-S1-E9-02 16532 ECE Reverse Approval AR-E9-00 16532 ECE Fog Approval F1-E9-00 16532 ECE Reflector Approval IB-E9-02 16532 CTA Approval CTA-060819 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR280ARW is compatible with 10-30V DC trailer and vehicle electrical systems. ADR and ECE approved for all functions. Mounts via surface mount (116mm mounting hole centre) or twin rear stud bolt mount for horizontal or vertical mounting surfaces. Confirm wiring requirements for all five active functions before purchase. Frequently Asked Questions Is the BR280ARW ADR approved for on-road use? Yes. The BR280ARW holds individual ECE approval numbers for indicator, stop/tail, reverse, fog, and reflector functions, and CTA approval CTA-060819, confirming compliance with Australian and international road safety requirements. What is a sequential indicator and why is it beneficial? A sequential indicator activates its LEDs in a progressive sweeping sequence rather than all simultaneously. This provides a more visible and distinctive indicator signal that is easier for other road users to notice, improving rear visibility and road safety. How can the BR280ARW be mounted? The BR280ARW can be surface mounted using the 116mm mounting hole centre, or bolt mounted using the twin rear studs for horizontal or vertical mounting surfaces, providing flexibility for different trailer and vehicle rear panel configurations. Is the BR280ARW compatible with 24V systems? Yes. The BR280ARW operates across 10-30V DC, compatible with both 12V and 24V vehicle and trailer electrical systems. How many functions does the BR280ARW provide? The BR280ARW provides six functions: stop, tail, sequential indicator, reverse, fog, and integrated retro reflector, making it one of the most complete single rear combination lamp units in the BR280 Series.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Roadvision BR207LR LED Combination Lamp Twin Pack Stop Tail Indicator and Reflector An ADR-approved 12V LED rectangle combination lamp twin pack from the Roadvision BR207 Series, the BR207LR features stop, tail, indicator, and integrated reflector functions with polycarbonate lens and housing, 100mm mounting hole centre, and a 300mm tinned copper pre-wired cable, backed by a 5-year warranty. Product Overview The Roadvision BR207LR is a compact LED combination lamp from the BR207 Series supplied as a twin pack, designed as a simple DIY trailer lighting solution for budget-conscious consumers. Six indicator LEDs and 6 stop/tail LEDs per lamp deliver more light output than equivalent incandescent lamps while drawing a fraction of the current at 12V DC. The polycarbonate lens and housing is waterproof, dustproof, and submersible with a 100,000 hour rated LED lifespan. The integrated reflector is built into the housing. Easy twin stud surface mount installation with stainless steel hardware. Pre-wired with a 300mm tinned copper cable with earth (white), stop (red), rail (brown), and indicator (green or yellow) wires. ADR and ECE approved for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611) functions. CTA approval CTA-060546. Backed by a 5-year warranty. Features & Benefits Twin Pack for Complete Trailer Rear Lamp Installation: The BR207LR is supplied as a twin pack, providing both left and right lamps for a complete trailer rear lamp installation in a single purchase. Stop, Tail, Indicator, and Integrated Reflector Functions: Combines stop, tail, indicator, and integrated reflector functions in a single compact unit. ADR and ECE Approved for All Functions: ECE approval numbers for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611), and CTA approval CTA-060546, confirming compliance with Australian road safety requirements. 6 LEDs Per Function - Indicator and Stop/Tail: Six LEDs per function produce more light output than equivalent incandescent lamps with minimal current draw. Polycarbonate Lens and Housing - Waterproof Submersible: Sealed polycarbonate construction provides full waterproof, dustproof, and submersible protection for boat trailer and all-weather applications. 100,000 Hour LED Lifespan - Fit and Forget: Maintenance-free solid-state technology eliminates bulb replacements. 12V DC Input: Compatible with standard 12V trailer and vehicle electrical systems. Easy Twin Stud Surface Mount with Stainless Steel Hardware: Integrated twin mounting studs with stainless steel hardware provide simple, secure, corrosion-resistant installation. 300mm Tinned Copper Pre-Wired Cable: Corrosion-resistant tinned copper wiring with earth (white), stop (red), rail (brown), and indicator (green or yellow) wires. 5-Year Warranty: Backed by a 5-year Roadvision warranty. Technical Specs Specification Detail SKU BR207LR Brand Roadvision Series BR207 Description Rect Stop/Tail/Ind/Ref Twin Pack Functions Stop, Tail, Indicator, Reflector LED Quantity - Indicator 6 LEDs LED Quantity - Stop/Tail 6 LEDs Input Voltage 12V DC Current Draw - Indicator 0.09A at 13.8V Current Draw - Stop 0.09A at 13.8V Current Draw - Tail 0.02A at 13.8V Lens Construction Polycarbonate Housing Construction Polycarbonate Dimensions 150mm x 80mm x 23mm Mounting Hole Centre 100mm Mount Twin Stud Surface Mount with Stainless Steel Hardware Cable Length 300mm Tinned Copper Wiring Earth - White, Stop - Red, Rail - Brown, Indicator - Green or Yellow Pack Quantity 2 Lamps ECE Indicator Approval E4-6R-0115611 ECE Stop/Tail Approval E4-7R-0215611 ECE Reflector Approval E4-3R-0215611 CTA Approval CTA-060546 LED Lifespan 100,000 Hours Warranty 5 Years Compatible With The BR207LR is compatible with 12V DC trailer and vehicle electrical systems. ADR and ECE approved for on-road use. Confirm mounting and wiring requirements before purchase. A version with licence plate lamp is available as the BR207LRNP. Multi-volt versions are available as the BR207MV and BR207NPMV. Frequently Asked Questions Is the BR207LR ADR approved for on-road use? Yes. The BR207LR holds ECE approval numbers for indicator (E4-6R-0115611), stop/tail (E4-7R-0215611), and reflector (E4-3R-0215611) functions, and CTA approval CTA-060546. Is the BR207LR waterproof for boat trailer use? Yes. The sealed polycarbonate lens and housing provide waterproof and submersible protection, making the BR207LR suitable for boat trailer applications. How many lamps are in the BR207LR pack? The BR207LR is a twin pack containing two lamps for a complete left and right trailer rear lamp installation. What is the difference between the BR207LR and the BR207LRNP? Both are 12V twin packs with the same lamp specifications. The BR207LRNP adds an integrated licence plate lamp with 4 LEDs and includes a kit with additional components. The BR207LR does not include a licence plate lamp. Is the BR207LR compatible with 24V systems? No. The BR207LR is a 12V DC unit only. For multi-volt 10-30V DC compatibility, refer to the BR207MV or BR207NPMV.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Interior LED Light 61 SMD LEDs, 30W Equivalent, 120° Spread, 300mm Product Overview The LED Autolamps 1061/24 is a 24V slimline interior LED light bar measuring 300mm x 25mm x 10mm, fitted with 61 SMD LEDs and equivalent in output to a 30W incandescent globe. Delivering a 120° spread for broad, even illumination, it's designed for truck cab interiors, sleeper berths, and commercial vehicle cabins running 24V electrical systems. The low-profile 10mm depth sits neatly on ceilings and panels without adding bulk. Backed by a 3-year warranty. Features & Benefits 61 SMD LEDs — high LED count across a 300mm bar delivers even, consistent interior illumination 30W equivalent output — matches the brightness of a standard 30W incandescent globe with significantly lower power consumption 120° spread — wide beam angle delivers broad, even illumination across the interior space without hotspots Low-profile slimline design — 300mm x 25mm x 10mm form factor mounts flush to ceilings and panels without adding bulk 24V only — designed specifically for 24V heavy transport and commercial vehicle electrical systems 3-year warranty — backed by LED Autolamps' warranty programme Technical Specs Specification Detail SKU 1061/24 Lamp Type Interior Light LED Configuration 61 x SMD Equivalent Output 30W incandescent Beam Angle 120° Voltage 24V Dimensions 300mm x 25mm x 10mm Light Style Rectangle Warranty 3 years Weight 0.08 kg Compatible With / Goes Well With 24V truck cabs, sleeper berths, and commercial vehicle interiors Heavy transport and large vehicle electrical systems running 24V LED Autolamps 1031/24 interior lamp (same 24V series, different form factor) LED Autolamps interior lighting accessories and wiring harnesses Frequently Asked Questions Is the 1061/24 suitable for 12V systems? No. The 1061/24 is a 24V-only light, designed specifically for heavy transport and commercial vehicles running 24V electrical systems. What does 30W equivalent mean? The 1061/24 produces light output comparable to a 30W incandescent globe while using significantly less power — the LED technology delivers the same visible brightness with lower energy consumption and a longer lifespan. What is the beam angle of the 1061/24? The 1061/24 delivers a 120° spread, providing broad, even illumination across interior spaces without concentrated hotspots. How slim is the 1061/24 profile? At just 10mm deep and 25mm wide, the 1061/24 is an ultra-slim bar lamp that mounts virtually flush to ceilings and panels — suitable for even the tightest interior spaces. What warranty does the 1061/24 carry? The 1061/24 is backed by a 3-year warranty from LED Autolamps. Weight 0.08 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

White LED Reverse Lamp Insert for Jumbo J3 Series Individually Mountable, ADR Approved, IP67. Product Overview The LED Autolamps J3WM is a white LED reverse lamp insert designed as an individual replacement module for the popular Jumbo J3 series rear lamp assembly. The Jumbo series is a common large-format lamp assembly used across many caravan, trailer, and truck applications, with the full assembly mounted horizontally using bolts through the rear and wire routed through the mounting surface. Rather than replacing the entire jumbo lamp assembly when one module fails, the J3WM allows the white reverse function module to be individually mounted with its own bracket and replaced separately a significant cost and time saving for fleet operators and trailer owners. Featuring an inbuilt reflex reflector, the J3WM measures 190mm x 122mm x 30mm and is ADR approved (CTA042964). IP67 rated, 12–24V compatible, and backed by LED Autolamps' 5-year warranty. Key Specifications Function: White reverse lamp with inbuilt reflex reflector LED colour: White Dimensions: 190mm x 122mm x 30mm Mount type: Individually mountable with bracket Series: Jumbo J3 Series (replacement module) IP rating: IP67 Input voltage: 12–24V DC (multivolt) Compliance: ADR approved CTA042964 Warranty: 5 years Weight: 0.5kg Packaging: Blister pack single unit Brand: LED Autolamps SKU: J3WM Features & Benefits Individually replaceable module: If a single function module in your Jumbo series lamp assembly is accidentally damaged, only that module needs to be replaced not the entire lamp assembly significant savings for fleet operators and trailer owners Inbuilt reflex reflector: Combines active white reverse LED output with passive reflector compliance in a single module ADR approved CTA042964: Fully compliant with Australian Design Rules for reverse lamp use on Australian road vehicles and trailers Individually mountable with bracket: Each module clips into its own bracket within the Jumbo assembly housing, allowing modular servicing IP67 waterproof: Completely sealed against dust and temporary water immersion for reliable year-round outdoor performance 12V and 24V compatible: Multivolt operation suits passenger trailers, caravans, and 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU J3WM Brand LED Autolamps Series Jumbo J3 Series Function White Reverse Lamp + Inbuilt Reflex Reflector LED Colour White Dimensions 190mm x 122mm x 30mm Mount Type Individually mountable with bracket IP Rating IP67 Input Voltage 12–24V DC (multivolt) ADR Compliance CTA042964 Warranty 5 Years Weight 0.5kg Packaging Blister Pack single unit Compatible With Compatible with: LED Autolamps Jumbo J3 Series rear lamp assemblies (full assembly: 595mm x 130mm x 45mm) Suits trucks, trailers, and caravans using the J3 series jumbo lamp format Frequently Asked Questions What is a Jumbo series replacement module? The Jumbo series lamp assembly is made up of individual function modules such as stop/tail/indicator, reverse, and amber indicator inserts each individually mountable with its own bracket. If one module is damaged, it can be replaced individually rather than replacing the entire jumbo lamp assembly.  Is this the complete jumbo lamp or just one module? The J3WM is a single white reverse lamp module one component of the larger Jumbo J3 series lamp assembly. For a complete pre-assembled stop/tail/indicator/reverse jumbo lamp, refer to the LED Autolamps J3BARWM. Is this lamp ADR approved for Australian road use? Yes the J3WM is ADR approved under CTA042964, confirming it meets Australian legal requirements for reverse lamp use. Does this lamp include a reflex reflector? Yes an integrated reflex reflector is built into the module, providing both active white LED output and passive reflective compliance. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Confirm your existing lamp assembly uses the J3 series format before purchasing this replacement module. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Red CREE LED Rock Lights Built for the Worst Conditions IP68, Aluminium Housing, Off-Road Ready Product Overview The Stinger SPXULEDR is a 2-pod red CREE LED underbody and rock light set from the Stinger Powersports SPX range. Each pod houses three red CREE LEDs delivering 9W of output across a 120° beam angle, mounted in a die-cast aluminium IP68-rated housing that is waterproof, dustproof, and built for the harshest off-road environments. The pods mount on both flat and tubular surfaces via the included rubber mounting pads and hardware, giving flexible positioning in underbodies, wheel wells, engine compartments, and vehicle interiors. Operating on 12V DC, the SPXULEDR is compatible with standard automotive electrical systems. Certified to CE and RoHS standards. For off-road use only. Key Specifications Manufacturer Part Number: SPXULEDR LED colour: Red LED source: 3x CREE LED per pod LED power: 9W per pod Beam angle: 120° IP rating: IP68 (waterproof and dustproof) Housing material: Die-cast aluminium Housing colour: Black Operating voltage: 12V DC only Working temperature: -20°C to +40°C Dimensions (per pod): 70mm (L) x 35mm (W) x 10mm (H) Certifications: CE, RoHS Quantity: 2 pods Included: 2x LED pods, 2x rubber mounting pads, 4x mounting hardware Application: Off-road use only Features & Benefits IP68 Waterproof and Dustproof Housing — Full IP68 rating means the SPXULEDR is completely protected against dust ingress and continuous water immersion, making it suitable for the most demanding off-road, mud, and water crossing conditions. Bright Red CREE LEDs — Three CREE LEDs per pod deliver 9W of focused red light across a wide 120° beam angle, providing strong underbody and wheel well illumination for off-road visibility and style. Die-Cast Aluminium Construction — The rugged aluminium housing resists impact, vibration, and heat while keeping the pods lightweight enough for underbody and wheel well applications. Versatile Mounting — Rubber mounting pads support installation on both flat and tubular surfaces, enabling flexible positioning across underbodies, engine bays, wheel wells, and interior locations. Complete Mounting Kit Included — Rubber pads and hardware are included in the box, providing everything needed to mount both pods without additional hardware. CE and RoHS Certified — Meets CE electrical safety and RoHS hazardous substances standards, confirming compliance with international safety and environmental requirements. Technical Specs Specification Detail Part Number SPXULEDR Brand Stinger LED Colour Red LED Type CREE LED Count 3x per pod LED Power 9W per pod Beam Angle 120° IP Rating IP68 Housing Material Die-cast aluminium Housing Colour Black Operating Voltage 12V DC only Working Temperature -20°C to +40°C Dimensions (per pod) 70mm (L) x 35mm (W) x 10mm (H) Certifications CE, RoHS Quantity 2 pods Included 2x pods, 2x rubber mounting pads, 4x mounting hardware Application Off-road use only Compatible With / Goes Well With ATVs, UTVs, off-road vehicles, Jeeps, trucks, and 4WD vehicles Underbody, wheel well, engine compartment, and interior mounting locations Flat and tubular mounting surfaces Standard 12V DC automotive electrical systems Caution: The SPXULEDR is for off-road use only — it is not road-legal for on-highway vehicle use in Australia. Operating voltage is 12V DC only — do not use with 24V systems. Working temperature maximum is +40°C; confirm suitability for engine bay mounting positions where temperatures may exceed this limit. Frequently Asked Questions Is the SPXULEDR road-legal in Australia? No — the SPXULEDR is for off-road use only. Red underbody and rock lights are not road-legal for use on public roads in Australia. Use is restricted to off-road environments. What is the IP68 rating? IP68 is the highest common IP rating for ingress protection, indicating the pods are completely dustproof and protected against continuous water immersion beyond 1 metre. This makes the SPXULEDR suitable for river crossings, heavy rain, mud, and other extreme off-road water exposure. How many pods are included in the set? The SPXULEDR includes 2 LED pods, along with 2 rubber mounting pads and 4 pieces of mounting hardware for both pods. Can the SPXULEDR be mounted on tubular surfaces such as roll cages or bash bars? Yes — the rubber mounting pads support installation on both flat and tubular surfaces, allowing the pods to be mounted on roll cage tubing, bash bars, and other curved surfaces in addition to flat panels. What voltage do the SPXULEDR pods require? The SPXULEDR operates on 12V DC only. It is not compatible with 24V electrical systems. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Light Up the Trail ENLIGHT10 4ft Dynamic RGB Whip with 360° LEDs, IP65 Rated and Quick-Release Product Overview The Stinger SPXDW4 is a 4-foot dynamic RGB whip light from the ENLIGHT10 SPXD range, designed for off-road vehicles, ATVs, UTVs, and powersports applications. Built around 360° of dynamic RGB LEDs with fully customisable colour patterns, the SPXDW4 delivers a highly visible, personalised light show in the most demanding environments. The silicone-coated whip carries an IP65 rating, providing heavy-duty protection against water, mud, sand, dust, and debris. A quick-release mounting system allows the whip to be detached in seconds when not needed. Rugged watertight connectors are used throughout. The SPXDW4 is HEIGH10-compatible and can be controlled via the Stinger enLIGHT10 app on a smartphone. Key Specifications Manufacturer Part Number: SPXDW4 Whip length: 4ft (approximately 1.2m) LED configuration: 360° dynamic RGB Weather rating: IP65 Coating: Silicone Quick-release: Yes Connectors: Watertight ENLIGHT10 RGB module required: Yes — not included (SPXDBTC sold separately, or included with SPXDK4 / SPXDK8) HEIGH10 compatible: Yes App compatible: Yes — Stinger enLIGHT10 app (Bluetooth controller required) Included: 4ft dynamic RGB whip, extension harness, installation hardware Features & Benefits 360° Dynamic RGB LEDs — Full 360-degree illumination with variable dynamic colours, lighting patterns, and brightness levels — fully customisable via the enLIGHT10 app or HEIGH10 infotainment. IP65 Silicone Coating — The heavy-duty silicone outer coating is rated IP65, providing waterproof, shockproof, and dust-proof protection against the full range of off-road conditions — water, mud, sand, dirt, and debris. Quick-Release System — Detaches from the mounting point in seconds, making it simple to remove the whip for transport, storage, or when not in use without tools. HEIGH10 Compatible — Integrates directly with the Stinger HEIGH10 infotainment system (with SE-SXMHAR harness, sold separately) for in-dash lighting control alongside your audio and navigation. Stinger enLIGHT10 App Control — Full colour, pattern, and brightness control via the enLIGHT10 smartphone app when paired with the SPXDBTC Bluetooth controller (sold separately). Rugged Watertight Connectors — All connections use watertight connectors, maintaining the IP65-level protection through the full harness run. Extension Harness & Hardware Included — An extension harness and all necessary installation hardware are supplied in the box, reducing additional parts needed to complete the installation. Technical Specs Specification Detail Part Number SPXDW4 Brand Stinger Whip Length 4ft (~1.2m) LED Type Dynamic RGB LED Coverage 360° Weather Rating IP65 Coating Silicone Quick-Release Yes Connectors Watertight ENLIGHT10 RGB Module Required — not included HEIGH10 Compatible Yes App Control Yes — Stinger enLIGHT10 app (SPXDBTC required) Included 4ft RGB whip, extension harness, installation hardware Compatible With / Goes Well With Stinger ENLIGHT10 SPXDBTC Bluetooth controller (required RGB module — sold separately) Stinger ENLIGHT10 SPXDK4 rock light kit (includes RGB module) Stinger ENLIGHT10 SPXDK8 rock light kit (includes RGB module) Stinger HEIGH10 infotainment system (via SE-SXMHAR harness, sold separately) Stinger enLIGHT10 smartphone app Stinger SPXYADP Y adapter harness (sold separately) Off-road vehicles, ATVs, UTVs, Jeeps, trucks, and powersports vehicles Frequently Asked Questions Does the SPXDW4 include the RGB controller module? No — an ENLIGHT10 RGB module is required and is not included. The SPXDBTC Bluetooth controller is available separately, or is included with the SPXDK4 and SPXDK8 rock light kits if you are building a combined system. What is the IP rating of the SPXDW4? The SPXDW4 carries an IP65 rating, providing protection against water jets, heavy dust, mud, sand, and debris — built for genuine off-road and powersports environments. How does the quick-release system work? The SPXDW4 features a quick-release mounting system that allows the whip to be detached from its mount in seconds without tools — useful for removing it during transport, storage, or when it's not required for a particular trip. Can the SPXDW4 be controlled from a Stinger HEIGH10 head unit? Yes — the SPXDW4 is HEIGH10 compatible. Connection requires the SE-SXMHAR ENLIGHT10 replacement harness (sold separately) along with the HEIGH10 running the latest firmware. What is included in the box? The box includes the 4ft dynamic RGB whip, an extension harness, and installation hardware. The ENLIGHT10 RGB module (SPXDBTC) is not included and must be sourced separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Expand Your ENLIGHT10 Lighting Run 3-Pin Y Harness Pack for SPXD5 and SPXDUBKIT Product Overview The Stinger SPXDMF is an 8-pack of 3-pin Y harness connectors designed for expanding or extending lighting harness runs on compatible Stinger ENLIGHT10 products. The pack contains four male and four female solder-on connectors, along with 16 pieces of heat shrink, providing the hardware needed to add additional harness sections to SPXD5 LED strip and SPXDUBKIT installations. This is a wiring accessory intended for use by those customising or extending their ENLIGHT10 lighting layout. It is for use with Stinger ENLIGHT10 SPXD5 and SPXDUBKIT only. Key Specifications Manufacturer Part Number: SPXDMF Function: 3-pin Y harness connectors for ENLIGHT10 harness expansion Compatible products: Stinger ENLIGHT10 SPXD5, SPXDUBKIT Contents: 4x female solder-on connectors, 4x male solder-on connectors, 16x heat shrink pieces Total connectors: 8 (4 male + 4 female) Connector type: 3-pin solder-on Application: ENLIGHT10 harness addition and customisation Features & Benefits Harness Expansion Made Simple — Provides the solder-on connectors and heat shrink needed to add additional ENLIGHT10 harness sections to an SPXD5 or SPXDUBKIT installation, without sourcing individual components. Matched Male and Female Pairs — The pack includes both male and female connectors in equal quantities (4 of each), covering the connection points needed for Y-harness splits and extensions. Heat Shrink Included — 16 pieces of heat shrink are supplied alongside the connectors, providing the insulation needed for clean, weatherproof solder joints without a separate hardware run. Customise Your Install — Enables a more flexible lighting layout by allowing additional harness branches to be added where the standard harness length or configuration doesn't reach. Technical Specs Specification Detail Part Number SPXDMF Brand Stinger Function 3-pin Y harness connectors for ENLIGHT10 Connector Type Solder-on, 3-pin Female Connectors 4x Male Connectors 4x Heat Shrink Pieces 16x Total Pack Contents 8 connectors + 16 heat shrink pieces Compatible Products Stinger ENLIGHT10 SPXD5, SPXDUBKIT Application Harness addition and customisation Compatible With / Goes Well With Stinger ENLIGHT10 SPXD5 LED strips Stinger ENLIGHT10 SPXDUBKIT Frequently Asked Questions What is the SPXDMF used for? The SPXDMF provides 3-pin solder-on Y harness connectors and heat shrink for adding additional harness sections to Stinger ENLIGHT10 SPXD5 and SPXDUBKIT installations, allowing a more customised or extended lighting layout. What is included in the pack? The pack contains 4x female solder-on connectors, 4x male solder-on connectors, and 16x heat shrink pieces — a total of 8 connectors with heat shrink for insulation. Do I need to solder to use the SPXDMF? Yes — the SPXDMF uses solder-on connectors. Soldering is required to attach the connectors to the harness. The included heat shrink provides insulation over the solder joints for a clean, weatherproof finish. Which ENLIGHT10 products is the SPXDMF compatible with? The SPXDMF is confirmed for use with Stinger ENLIGHT10 SPXD5 LED strips and the SPXDUBKIT only. It is not confirmed for use with other ENLIGHT10 products. Is the SPXDMF a plug-and-play accessory? No — the SPXDMF requires soldering. It is a wiring accessory for those customising or extending their ENLIGHT10 harness layout, not a plug-in solution. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Control Your ENLIGHT10 Lighting From Your HEIGH10 The Harness That Makes It Happen Product Overview The Stinger SE-SXMHAR is a replacement harness that connects compatible Stinger ENLIGHT10 SPXD lighting products to the Stinger HEIGH10 infotainment system, enabling direct lighting control from the HEIGH10's interface. Once connected, the HEIGH10 can change colours, toggle lights on and off, link lighting colour to match the HEIGH10's own illumination colour, and set lights to activate automatically with the vehicle's headlights via the AUTO function. Compatible ENLIGHT10 products are the SPXDBTC, SPXDK8, SPXDK4, and SPXDUBKIT. The HEIGH10 infotainment system must be running the latest firmware version for ENLIGHT10 integration to function. The harness can also be used alongside the enLIGHT10 by Stinger smartphone app for additional control options. Key Specifications Manufacturer Part Number: SE-SXMHAR Function: ENLIGHT10 to HEIGH10 connection harness Compatible head unit: Stinger HEIGH10 (latest firmware required) Compatible ENLIGHT10 products: SPXDBTC, SPXDK8, SPXDK4, SPXDUBKIT HEIGH10 firmware: Latest version required — update before installation Control functions: Colour change, on/off, link to HEIGH10 illumination colour, AUTO headlight trigger App compatible: Yes — enLIGHT10 by Stinger smartphone app Included: Harness only Features & Benefits HEIGH10 Lighting Integration — Connects ENLIGHT10 SPXD lighting directly to the HEIGH10 infotainment system, enabling full lighting control from the head unit's touchscreen interface without reaching for a separate remote or phone. Colour Matching — LINK Mode — The LINK function synchronises SPXD lighting colour to match the HEIGH10's own illumination colour, creating a coordinated interior and exterior lighting look. AUTO Headlight Trigger — Set to AUTO and the SPXD lights will turn on and off in sync with the vehicle's headlights, eliminating the need to manually control lighting every time the lights are switched. Dual Control — HEIGH10 or App — Lighting can be controlled from the HEIGH10 screen or the enLIGHT10 by Stinger smartphone app, giving flexible access from wherever is most convenient. Replacement Harness — Provides a direct replacement for a missing or damaged connection harness between the HEIGH10 and ENLIGHT10 products, restoring integration without needing new hardware. Technical Specs Specification Detail Part Number SE-SXMHAR Brand Stinger Function ENLIGHT10 to HEIGH10 connection harness Compatible Head Unit Stinger HEIGH10 (latest firmware required) Compatible ENLIGHT10 Products SPXDBTC, SPXDK8, SPXDK4, SPXDUBKIT HEIGH10 Firmware Latest version required Control Modes Colour change, on/off, LINK, AUTO App Control Yes — enLIGHT10 by Stinger app Included Harness only Compatible With / Goes Well With Stinger HEIGH10 infotainment system (latest firmware version) Stinger ENLIGHT10 SPXDBTC Bluetooth controller Stinger ENLIGHT10 SPXDK8 Stinger ENLIGHT10 SPXDK4 Stinger ENLIGHT10 SPXDUBKIT enLIGHT10 by Stinger smartphone app Caution: The HEIGH10 must be running the latest firmware version for ENLIGHT10 integration to function — update firmware before installation. The SE-SXMHAR is for use with Stinger HEIGH10 and ENLIGHT10 products only. Compatibility with other head units or third-party lighting systems is not confirmed. Frequently Asked Questions What does the SE-SXMHAR do? The SE-SXMHAR is a connection harness that links compatible Stinger ENLIGHT10 SPXD lighting products to the Stinger HEIGH10 infotainment system, enabling lighting control — including colour, on/off, LINK mode, and AUTO headlight trigger — directly from the HEIGH10 interface. Does the HEIGH10 need to be updated before using this harness? Yes — the HEIGH10 must be running the latest firmware version for ENLIGHT10 integration to function. Update the HEIGH10 firmware via the Stinger update process before connecting the SE-SXMHAR. Which ENLIGHT10 products work with the SE-SXMHAR? The SE-SXMHAR is confirmed compatible with Stinger ENLIGHT10 products SPXDBTC, SPXDK8, SPXDK4, and SPXDUBKIT. Can I still use the smartphone app after installing the SE-SXMHAR? Yes — the enLIGHT10 by Stinger app remains available as an alternative control method alongside the HEIGH10 interface, giving flexible control from either the head unit or a smartphone. What is included in the box? The box contains the connection harness only. The Stinger HEIGH10 infotainment system and ENLIGHT10 products are sold separately. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Power Your ENLIGHT10 From the Cig Socket Simple Adaptor With On/Off Switch Included Product Overview The Stinger SPXCLA is a cigarette lighter adaptor harness designed specifically for use with Stinger ENLIGHT10 products. It provides a clean, simple power connection from a standard 12V cigarette lighter socket to the ENLIGHT10 accessory via bullet terminals, with an on/off switch built in for convenient control without reaching for the unit itself. Compatible ENLIGHT10 products are the SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC. It is not a universal cigarette lighter adaptor use with non-ENLIGHT10 products is not confirmed by the supplier. Key Specifications Manufacturer Part Number: SPXCLA Function: Cigarette lighter adaptor to bullet terminals On/off switch: Yes — included Compatible products: Stinger ENLIGHT10 SPXDK8, SPXDK4, SPXDUBKIT, SPXDBTC Universal fit: No — ENLIGHT10 products only Included: Cig lighter adaptor to bullet terminals harness Features & Benefits Cigarette Lighter Power Connection — Draws power directly from a standard 12V cigarette lighter socket, allowing ENLIGHT10 products to be powered without hardwiring into the vehicle's electrical system. On/Off Switch Included — The built-in on/off switch provides simple power control without needing to unplug the adaptor or access the ENLIGHT10 unit itself. Bullet Terminal Output — Terminates in bullet connectors compatible with the ENLIGHT10 product range for a clean, secure connection. Plug and Go — A straightforward accessory that simplifies ENLIGHT10 installation, particularly for temporary or semi-permanent setups. Technical Specs Specification Detail Part Number SPXCLA Brand Stinger Function Cig lighter adaptor to bullet terminals On/Off Switch Yes — included Compatible Products SPXDK8, SPXDK4, SPXDUBKIT, SPXDBTC Application Stinger ENLIGHT10 products only Included Cig lighter adaptor harness with bullet terminals Compatible With / Goes Well With Stinger ENLIGHT10 SPXDK8 Stinger ENLIGHT10 SPXDK4 Stinger ENLIGHT10 SPXDUBKIT Stinger ENLIGHT10 SPXDBTC Frequently Asked Questions What Stinger products is the SPXCLA compatible with? The SPXCLA is confirmed for use with Stinger ENLIGHT10 products SPXDK8, SPXDK4, SPXDUBKIT, and SPXDBTC only. It is not confirmed for use with other Stinger or third-party products. Does the SPXCLA include an on/off switch? Yes — an on/off switch is built into the harness, allowing the connected ENLIGHT10 product to be switched on or off without unplugging the adaptor from the cigarette lighter socket. What connector type does the SPXCLA use at the output end? The SPXCLA terminates in bullet terminals, matching the input connection on compatible ENLIGHT10 products. Can the SPXCLA be used as a general-purpose cigarette lighter adaptor? No — the SPXCLA is designed specifically for Stinger ENLIGHT10 products. It is not a universal cigarette lighter adaptor and should not be assumed compatible with other devices or accessories. What is included in the box? The box contains the cigarette lighter adaptor to bullet terminals harness with integrated on/off switch. No additional accessories are included. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI ST-04-G4-004 G4 Black Ultra Flood Work Light Built for camping, agriculture, and industrial applications where wide, even near-field illumination matters more than long-distance throw, the STEDI G4 Black Ultra Flood delivers a 3000-lumen, 80° diffused beam in a compact, fully sealed die-cast aluminium housing. Product Overview The ST-04-G4-004 is STEDI's G4 Black Ultra Flood Work Light, powered by four CREE XP-L2 LEDs producing 4000 raw lumens and 3000 tested lumens across an 80° ultra-flood beam pattern at 5700K white light. The ultra-diffused beam illuminates a zone 37 metres wide and 42 metres long at 1 LUX, providing broad, even coverage that minimises shadows and reduces glare and eye strain in working environments. The G4 is rated IP68 and IP69K for full waterproof and high-pressure wash-down protection, shock tested at 30Gs and vibration tested at 5Gs for reliable performance in off-road, agricultural, and industrial use. CISPR 25 C3 certification confirms the light meets electromagnetic compatibility requirements for vehicle-mounted installations. Compatible with both 12V and 24V systems, drawing 3.2A at 13.5V. The die-cast aluminium housing carries a premium AkzoNobel powder coat finish in black, with a polycarbonate lens and stainless steel hardware and bracket included. Rated for 50,000 hours LED lifespan. Features & Benefits 4x CREE XP-L2 LEDs at 40W Total: Four premium CREE XP-L2 LED emitters provide the optical efficiency and thermal management required for sustained high-output performance, producing 4000 raw lumens and 3000 independently tested lumens across the full beam pattern. 80° Ultra-Flood Beam Pattern: The 80° ultra-diffused beam is specifically optimised for near-field area illumination, spreading light broadly and evenly rather than concentrating it in a narrow driving beam. This eliminates dark spots and harsh shadow transitions, reducing eye strain during extended work sessions. 37m Wide, 42m Long Flood Zone at 1 LUX: The broad beam covers a 37-metre-wide and 42-metre-long illuminated zone at the 1 LUX threshold, providing genuine worksite-scale coverage suitable for camp setups, agricultural machinery lighting, and industrial work area illumination. 5700K White Light: The 5700K colour temperature produces a crisp, neutral white light that accurately renders colours in the work area and provides high contrast for detail work in agricultural and industrial environments. IP68 and IP69K Dual Rating: The dual IP68 and IP69K certification confirms the G4 is protected against continuous water immersion (IP68) and against high-pressure, high-temperature water jet wash-down (IP69K), covering the full range of conditions encountered in agricultural, marine, and industrial use. CISPR 25 C3 Certified: CISPR 25 C3 electromagnetic compatibility certification confirms the G4 does not produce radio frequency interference that would affect in-vehicle communication systems including UHF, CB, GPS, or Bluetooth. 30G Shock and 5G Vibration Tested: Independently tested to withstand 30G shock loads and 5G sustained vibration, confirming structural and electrical integrity under the demanding mechanical conditions of off-road, agricultural machinery, and heavy equipment applications. 12V and 24V Compatibility: Operates on both 12V and 24V electrical systems, making it compatible with passenger vehicles, light commercial vehicles, trucks, agricultural machinery, and industrial equipment. Premium AkzoNobel Powder Coat Finish: The housing carries a premium AkzoNobel powder coat in black, known for its adhesion, hardness, and resistance to chipping, UV degradation, and chemical exposure in outdoor applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The die-cast aluminium housing provides structural rigidity and thermal management for the LED array, and the polycarbonate lens provides impact resistance and optical clarity throughout the rated 50,000-hour lifespan. Stainless Steel Hardware and Bracket Included: Stainless steel mounting hardware and bracket are included for a complete, corrosion-resistant installation. Technical Specs Specification Detail SKU ST-04-G4-004 Brand STEDI LED 4x CREE XP-L2 LED Power Output 4 x 10W (40W total) Raw Lumens 4,000 lm Tested Lumens 3,000 lm Beam Type Ultra-Flood Beam Angle 80° 1 LUX Distance 42m Flood Zone at 1 LUX 37m wide x 42m long Colour Temperature 5700K Operating Voltage 12V and 24V Amp Draw 3.2A @ 13.5V IP Rating IP68 and IP69K CISPR Rating CISPR 25 C3 Shock Tested 30G Vibration Tested 5G Housing Material Die-cast aluminium Lens Material Polycarbonate Finish Premium AkzoNobel powder coat, black Hardware Stainless steel LED Lifespan 50,000 hours Weight 1.0 kg Goes Well With The ST-04-G4-004 is well suited to camp lighting setups, agricultural machinery work lighting, and industrial site illumination where broad near-field coverage is the priority. It pairs naturally with other STEDI lighting products including light bars and spot driving lights for vehicles requiring both long-range forward illumination and broad near-field work lighting. A STEDI or compatible wiring harness with switch is recommended for clean vehicle installation. For 4WD and touring applications, the G4 Ultra Flood complements STEDI's driving light range by covering the near-field blind spot that long-range driving lights leave unlit. Frequently Asked Questions What is the difference between an ultra-flood beam and a standard flood beam? A standard flood beam typically covers 60° and focuses output in a relatively defined forward arc suited to driving or work situations requiring moderate spread. The G4's 80° ultra-flood beam further diffuses the light output across a wider horizontal and vertical angle, creating a broader, more even illumination zone with reduced hot spots and lower peak intensity. This makes the ultra-flood pattern better suited to area illumination such as camp setups and machinery work lighting, where even coverage across the near field is more important than maximum intensity at any specific point. What does IP69K add to IP68 protection? IP68 certifies the light is sealed against continuous water immersion at specified depth and duration. IP69K is an additional certification covering high-pressure and high-temperature water jet wash-down, which is encountered when hosing down agricultural machinery, construction equipment, and commercial vehicles. The G4's dual IP68 and IP69K rating confirms it is protected against both scenarios. What does CISPR 25 C3 mean for vehicle installations? CISPR 25 is an international standard that measures the radio frequency emissions produced by vehicle components. C3 is the highest performance class within CISPR 25, confirming the G4 produces minimal electromagnetic interference that could affect in-vehicle communication systems including AM/FM radio, DAB, GPS, Bluetooth, UHF CB, and mobile data. Is the G4 suitable for use on 24V trucks and agricultural machinery? Yes. The G4 is compatible with both 12V and 24V electrical systems, making it suitable for trucks, agricultural tractors, harvesters, and heavy equipment operating on 24V systems without requiring a voltage converter or a separate 24V-specific variant. What is the rated lifespan of the CREE XP-L2 LEDs? The CREE XP-L2 LEDs in the G4 are rated for 50,000 hours of operating life. At typical work light usage of 4 hours per day, this equates to over 34 years of service before the LEDs reach their rated end-of-life output level under normal use patterns.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI ST-04-G4-003 G4 Black Flood Work Light Delivering wide lateral near-field illumination for motorcycles, ATVs, camping, and agricultural tasks, the STEDI G4 Black Flood produces 3000 tested lumens through a 60° diffused optic with a 1 LUX reach of 81 metres and a flood zone approximately 40 metres wide. Product Overview The ST-04-G4-003 is STEDI's G4 Black Flood Work Light, powered by four CREE XP-L2 LEDs producing 4000 raw lumens and 3000 tested lumens through a 60° diffused flood optic at 5700K white light. The optimised optic produces a smooth, wide lateral flood suited to near-field work illumination, with a 1 LUX distance of 81 metres and a flood-lit zone approximately 40 metres wide. Compared to the G4 Ultra Flood's 80° beam, the 60° pattern concentrates output slightly more in the forward direction while retaining broad lateral spread, making it well suited to motorcycle and ATV auxiliary lighting, campsite setup, and agricultural task lighting where both reach and width are required. The G4 is rated IP68 and IP69K for full waterproof and high-pressure wash-down protection, shock tested at 30Gs and vibration tested at 5Gs for reliable performance in demanding environments. CISPR 25 C3 certification confirms the light meets electromagnetic compatibility standards for vehicle-mounted use. Compatible with both 12V and 24V systems, drawing 3.2A at 13.5V. The die-cast aluminium housing carries a premium AkzoNobel powder coat finish in black, with a polycarbonate lens, stainless steel hardware and bracket, and a STEDI protective cover included. Rated for 50,000 hours LED lifespan. Features & Benefits 4x CREE XP-L2 LEDs at 40W Total: Four premium CREE XP-L2 LED emitters provide the optical efficiency and thermal management required for sustained high-output performance, producing 4000 raw lumens and 3000 independently tested lumens across the full beam pattern. 60° Diffused Flood Optic: The 60° diffused optic is optimised for wide lateral near-field illumination, producing a smooth flood pattern that covers approximately 40 metres in width with a 1 LUX reach of 81 metres. The diffused lens eliminates harsh beam edges and hotspots for comfortable extended use. 1 LUX at 81m with 40m Wide Flood Zone: The beam delivers useful illumination to 81 metres at the 1 LUX threshold while maintaining a flood zone approximately 40 metres wide, balancing near-field area coverage with meaningful forward reach. 5700K White Light: The 5700K colour temperature produces a crisp, neutral white light that accurately renders colours in the work area and provides high contrast for detail work in agricultural and outdoor environments. IP68 and IP69K Dual Rating: The dual IP68 and IP69K certification confirms the G4 is protected against continuous water immersion (IP68) and against high-pressure, high-temperature water jet wash-down (IP69K), covering the full range of conditions encountered in off-road, agricultural, marine, and industrial use. CISPR 25 C3 Certified: CISPR 25 C3 electromagnetic compatibility certification confirms the G4 does not produce radio frequency interference that would affect in-vehicle communication systems including UHF, CB, GPS, or Bluetooth, making it suitable for installation on vehicles with sensitive communication equipment. 30G Shock and 5G Vibration Tested: Independently tested to withstand 30G shock loads and 5G sustained vibration, confirming structural and electrical integrity under the mechanical demands of motorcycle, ATV, off-road, and agricultural machinery applications. 12V and 24V Compatibility: Operates on both 12V and 24V electrical systems, making it compatible with motorcycles, passenger vehicles, light commercial vehicles, trucks, agricultural machinery, and industrial equipment. Premium AkzoNobel Powder Coat Finish: The housing carries a premium AkzoNobel powder coat in black, known for its adhesion, hardness, and resistance to chipping, UV degradation, and chemical exposure in outdoor applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The die-cast aluminium housing provides structural rigidity and thermal management for the LED array, and the polycarbonate lens provides impact resistance and optical clarity throughout the rated 50,000-hour lifespan. Stainless Steel Hardware, Bracket, and STEDI Cover Included: Stainless steel mounting hardware and bracket are included for a complete, corrosion-resistant installation, and a STEDI protective cover is supplied for storage or transport. Technical Specs Specification Detail SKU ST-04-G4-003 Brand STEDI LED 4x CREE XP-L2 LED Power Output 4 x 10W (40W total) Raw Lumens 4,000 lm Tested Lumens 3,000 lm Beam Type Flood Beam Angle 60° 1 LUX Distance 81m Flood Zone Width at 1 LUX Approximately 40m Colour Temperature 5700K Operating Voltage 12V and 24V Amp Draw 3.2A @ 13.5V IP Rating IP68 and IP69K CISPR Rating CISPR 25 C3 Shock Tested 30G Vibration Tested 5G Housing Material Die-cast aluminium Lens Material Polycarbonate Finish Premium AkzoNobel powder coat, black Hardware Stainless steel LED Lifespan 50,000 hours Weight 1.0 kg Goes Well With The ST-04-G4-003 is well suited to motorcycle and ATV auxiliary lighting, campsite illumination, and agricultural task lighting where a balance of forward reach and lateral spread is needed. It pairs naturally with other STEDI lighting products including driving lights and light bars for a complete vehicle lighting setup. For installations requiring the widest possible near-field coverage with maximum diffusion and minimum forward throw, the ST-04-G4-004 G4 Ultra Flood at 80° is the alternative within the same G4 range. A STEDI or compatible wiring harness with switch is recommended for clean vehicle installation. Frequently Asked Questions What is the difference between the G4 Flood (ST-04-G4-003) and the G4 Ultra Flood (ST-04-G4-004)? Both lights use the same 4x CREE XP-L2 LEDs, 40W total power, 3000 tested lumens, and share the same housing, IP ratings, and certifications. The key difference is the beam angle: the G4 Flood produces a 60° diffused beam with a 1 LUX reach of 81 metres and a flood zone approximately 40 metres wide, providing a balance of forward reach and lateral spread suited to motorcycle, ATV, and camping use. The G4 Ultra Flood produces an 80° beam with a 1 LUX reach of 42 metres and a flood zone 37 metres wide, prioritising maximum near-field area coverage over forward reach and suited to close-range worksite and agricultural illumination. What does IP69K add to IP68 protection? IP68 certifies the light is sealed against continuous water immersion at specified depth and duration. IP69K is an additional certification covering high-pressure and high-temperature water jet wash-down, encountered when hosing down agricultural machinery, ATVs, and commercial vehicles. The G4's dual IP68 and IP69K rating confirms it is protected against both scenarios. What does CISPR 25 C3 mean for vehicle and motorcycle installations? CISPR 25 is an international standard measuring radio frequency emissions produced by vehicle components. C3 is the highest performance class within CISPR 25, confirming the G4 produces minimal electromagnetic interference that could affect communication systems including AM/FM radio, GPS, Bluetooth, and UHF CB. This is particularly important for motorcycles and 4WD vehicles that rely on Bluetooth intercoms or UHF communication. Is the G4 suitable for motorcycle use? Yes. The G4 is specifically listed by STEDI as optimised for motorcycle and ATV use. The 60° flood pattern provides broad lateral illumination suited to roadside and campsite visibility from a motorcycle mounting position. The 30G shock and 5G vibration testing confirms the light is built to withstand the vibration and impact forces typical of motorcycle operation. What is the rated lifespan of the CREE XP-L2 LEDs? The CREE XP-L2 LEDs in the G4 are rated for 50,000 hours of operating life. At typical work light usage of 4 hours per day, this equates to over 34 years of service before the LEDs reach their rated end-of-life output level under normal use patterns.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

STEDI ST-04-G4-002 G4 Black Hybrid Spot Flood Work Light Combining the forward reach of a spot beam with the lateral spread of a flood, the STEDI G4 Black Hybrid delivers a smooth, homogeneous 3000-lumen beam extending 160 metres in length and 50 metres in width at 1 LUX. Product Overview The ST-04-G4-002 is STEDI's G4 Black Hybrid Work Light, powered by four CREE XP-L2 LEDs producing 4000 raw lumens and 3000 tested lumens through a hybrid beam pattern that combines spot and flood output in a single, smooth illuminated zone. The hybrid optic produces a homogeneous beam without the distinct spot centre and flood surround separation of conventional combo lights, reaching 160 metres in length and 50 metres in width at 1 LUX. This makes it a versatile single-light solution for applications requiring both forward reach and broad lateral coverage simultaneously, including 4WD auxiliary lighting, agricultural machinery, and work vehicle installation where neither a pure spot nor a pure flood would alone be adequate. The G4 is rated IP68 and IP69K for full waterproof and high-pressure wash-down protection, shock tested at 30Gs and vibration tested at 5Gs. CISPR 25 C3 certification confirms compatibility with sensitive in-vehicle communication systems. Compatible with both 12V and 24V systems, drawing 3.2A at 13.5V. The die-cast aluminium housing carries a premium AkzoNobel powder coat finish in black, with a polycarbonate lens, stainless steel hardware and bracket, and a STEDI protective cover included. Rated for 50,000 hours LED lifespan. Features & Benefits 4x CREE XP-L2 LEDs at 40W Total: Four premium CREE XP-L2 LED emitters provide the optical efficiency and thermal management required for sustained high-output performance, producing 4000 raw lumens and 3000 independently tested lumens across the full hybrid beam pattern. Hybrid Beam Combining Spot and Flood: The hybrid optic merges spot and flood output into a single, smooth, homogeneous illuminated zone without the distinct concentric rings typical of conventional combo beam lights. This provides usable illumination across both the near field and at distance simultaneously from a single light unit. 1 LUX at 160m Length and 50m Width: The hybrid beam reaches 160 metres in length and 50 metres in width at the 1 LUX threshold, providing significantly greater forward reach than a flood-only light while maintaining substantially broader lateral coverage than a spot-only light. 5700K White Light: The 5700K colour temperature produces a crisp, neutral white light that accurately renders colours in the working environment and provides high contrast across both the near field and mid-range illumination zones. IP68 and IP69K Dual Rating: The dual IP68 and IP69K certification confirms the G4 is protected against continuous water immersion (IP68) and against high-pressure, high-temperature water jet wash-down (IP69K), covering the full range of conditions encountered in off-road, agricultural, marine, and industrial use. CISPR 25 C3 Certified: CISPR 25 C3 electromagnetic compatibility certification confirms the G4 does not produce radio frequency interference that would affect in-vehicle communication systems including UHF, CB, GPS, or Bluetooth. 30G Shock and 5G Vibration Tested: Independently tested to withstand 30G shock loads and 5G sustained vibration, confirming structural and electrical integrity under the mechanical demands of off-road, agricultural machinery, and work vehicle applications. 12V and 24V Compatibility: Operates on both 12V and 24V electrical systems, making it compatible with passenger vehicles, light commercial vehicles, trucks, agricultural machinery, and industrial equipment. Premium AkzoNobel Powder Coat Finish: The housing carries a premium AkzoNobel powder coat in black, known for its adhesion, hardness, and resistance to chipping, UV degradation, and chemical exposure in outdoor applications. Die-Cast Aluminium Housing with Polycarbonate Lens: The die-cast aluminium housing provides structural rigidity and thermal management for the LED array, and the polycarbonate lens provides impact resistance and optical clarity throughout the rated 50,000-hour lifespan. Stainless Steel Hardware, Bracket, and STEDI Cover Included: Stainless steel mounting hardware and bracket are included for a complete, corrosion-resistant installation, and a STEDI protective cover is supplied for storage or transport. Technical Specs Specification Detail SKU ST-04-G4-002 Brand STEDI LED 4x CREE XP-L2 LED Power Output 4 x 10W (40W total) Raw Lumens 4,000 lm Tested Lumens 3,000 lm Beam Type Hybrid (Spot and Flood) 1 LUX Distance (Length) 160m 1 LUX Distance (Width) 50m Colour Temperature 5700K Operating Voltage 12V and 24V Amp Draw 3.2A @ 13.5V IP Rating IP68 and IP69K CISPR Rating CISPR 25 C3 Shock Tested 30G Vibration Tested 5G Housing Material Die-cast aluminium Lens Material Polycarbonate Finish Premium AkzoNobel powder coat, black Hardware Stainless steel LED Lifespan 50,000 hours Weight 1.0 kg Goes Well With The ST-04-G4-002 is well suited to 4WD and work vehicle installations where a single light needs to provide both forward reach and lateral coverage without dedicating separate lights to spot and flood duties. It pairs naturally with other STEDI G4 lights in the same range for multi-light setups, and with STEDI light bars and driving lights where the hybrid beam fills the mid-range gap between a long-range spot and a close-range flood. A STEDI or compatible wiring harness with switch is recommended for clean vehicle installation. Frequently Asked Questions What makes a hybrid beam different from a standard combo beam? A standard combo beam uses separate spot and flood optics within the same housing, typically producing a bright central spot surrounded by a wider flood ring. The transition between the two zones can be visible as an uneven pattern with a concentrated hotspot and lower-intensity surround. The G4 Hybrid's optic blends spot and flood output into a single, smooth, homogeneous illuminated zone without distinct rings or zones, providing a more natural and comfortable beam profile for both driving and work applications. How does the G4 Hybrid compare to the G4 Flood and G4 Ultra Flood in the same range? All three G4 variants use the same 4x CREE XP-L2 LEDs, 40W total power, 3000 tested lumens, housing, and certifications. The G4 Ultra Flood (ST-04-G4-004) produces an 80° beam reaching 42m at 1 LUX and 37m wide, optimised for close-range area illumination. The G4 Flood (ST-04-G4-003) produces a 60° beam reaching 81m at 1 LUX and approximately 40m wide, balancing near-field coverage with moderate forward reach. The G4 Hybrid (ST-04-G4-002) produces a combined spot and flood beam reaching 160m in length and 50m in width at 1 LUX, providing the greatest forward reach of the three while maintaining broad lateral coverage. What does IP69K add to IP68 protection? IP68 certifies the light is sealed against continuous water immersion at specified depth and duration. IP69K is an additional certification covering high-pressure and high-temperature water jet wash-down, encountered when hosing down agricultural machinery, work vehicles, and ATVs. The G4's dual IP68 and IP69K rating confirms it is protected against both scenarios. What does CISPR 25 C3 mean for vehicle installations? CISPR 25 is an international standard measuring radio frequency emissions produced by vehicle components. C3 is the highest performance class within CISPR 25, confirming the G4 produces minimal electromagnetic interference that could affect communication systems including AM/FM radio, GPS, Bluetooth, UHF CB, and mobile data. Is the G4 Hybrid suitable for use as a primary auxiliary driving light? The G4 Hybrid's 160-metre 1 LUX reach makes it more useful as an auxiliary driving light than the flood and ultra-flood variants, while its 50-metre width provides considerably broader coverage than a conventional spot light. For applications requiring maximum long-distance throw beyond 160 metres, a dedicated spot or long-range driving light would be more appropriate. The G4 Hybrid is best suited to work, off-road, and auxiliary lighting roles where a balanced beam from a single light is the priority.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less