ADR Approved Jumbo Stop/Tail/Indicator/Reverse Assembly 595mm, Full CRN Certification, IP67 Product Overview The LED Autolamps J3BARWM is the four-function flagship of the J3 Jumbo series a 12/24V rear combination lamp covering stop, tail, indicator, reverse, and inbuilt reflex reflectors across the same 595mm x 130mm x 45mm Jumbo housing as the J3BARRM, with the addition of a reverse function carrying its own CRN42967 certification. All five functions carry individual CRN approvals: stop/tail CRN42965, indicator CRN42964, reverse CRN42967, and reflector CRN42966. Drawing 0.47A stop, 0.04A tail, 0.42A indicator, and 0.18A reverse at 13.8V. Rated IP67 and backed by a 5-year warranty. Features & Benefits Five functions in one Jumbo assembly — stop, tail, indicator, reverse, and inbuilt reflex reflectors with individual CRN certifications Full CRN certification — stop/tail CRN42965, indicator CRN42964, reverse CRN42967, reflector CRN42966 595mm Jumbo form factor — suited to wide-body trucks, semi-trailers, and heavy commercial vehicles Inbuilt reflex reflectors — integrated passive reflective elements for additional rear visibility and compliance All four current draws confirmed — stop 0.47A, tail 0.04A, indicator 0.42A, reverse 0.18A at 13.8V 500mm centre-to-centre mount — confirm against your panel before installation Pre-wired surface mount — ready to connect out of the pack ADR road approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with 12V and 24V vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU J3BARWM Series Jumbo Lamp Type Stop / Tail / Indicator / Reverse / Reflector Voltage Range 12V / 24V Dimensions 595mm x 130mm x 45mm Mount Centre-to-Centre 500mm Stop Current Draw 0.47A @ 13.8V Tail Current Draw 0.04A @ 13.8V Indicator Current Draw 0.42A @ 13.8V Reverse Current Draw 0.18A @ 13.8V Reflector Inbuilt reflex Mounting Surface mount Connector Pre-wired Protection Rating IP67 Stop/Tail Compliance ADR — CRN42965 Indicator Compliance ADR — CRN42964 Reverse Compliance ADR — CRN42967 Reflector Compliance ADR — CRN42966 Warranty 5 years Compatible With / Goes Well With Wide-body trucks, semi-trailers, and heavy commercial vehicles requiring full-function Jumbo rear combination lighting 12V and 24V vehicle electrical systems LED Autolamps J3BARRM (same 595mm Jumbo form factor, without reverse) LED Autolamps J3AM and J3RM inserts (same J3 Jumbo series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the J3BARWM approved for road use in Australia? Yes. The J3BARWM holds individual ADR CRN certifications for all five functions — stop/tail (CRN42965), indicator (CRN42964), reverse (CRN42967), and reflector (CRN42966) — meeting Australian Design Rules for full legal on-road use. How does the J3BARWM differ from the J3BARRM? The J3BARWM adds reverse function with its own CRN42967 certification to the same 595mm x 130mm Jumbo form factor as the J3BARRM. Choose the J3BARWM for a complete five-function assembly; choose the J3BARRM where a separate reverse lamp is preferred. What are all four current draws? Stop draws 0.47A, tail 0.04A, indicator 0.42A, and reverse 0.18A — all at 13.8V. What is the IP rating on the J3BARWM? The J3BARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed truck body and trailer mounting. What warranty does the J3BARWM carry? The J3BARWM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Slimline Stop/Tail/Indicator Lamp 404mm, 17mm Depth, IP67, Horizontal or Vertical Mount Product Overview The LED Autolamps 380BBSTI12 is a 12V slimline LED combination lamp delivering stop, tail, and indicator functions in a single 404mm x 46mm x 17mm surface-mount unit. The ultra-slim 17mm depth suits installations where space is limited trailer chassis rails, tailgate edges, and narrow rear panels where conventional combination lamps are too bulky. ECE road approved for ADR compliance and rated IP67 for submersion up to 1 metre suited to boat trailers, agricultural equipment, and Australian outback conditions. Horizontal and vertical mounting orientations are supported, and the 50,000+ hour LED lifespan eliminates incandescent globe replacement. Backed by a 5-year warranty. Features & Benefits Ultra-slim 17mm depth — fits on narrow chassis rails, tailgate edges, and confined mounting spaces where conventional lamps won't 404mm x 46mm slimline form factor — low-profile surface mount reduces damage risk and suits custom trailer and caravan fabrications Stop, tail, and indicator combined — three functions in a single unit, reducing wiring complexity and parts count ECE road approved — meets international standards recognised under Australian Design Rules for legal on-road use IP67 rated — sealed against dust and water immersion to 1 metre depth; suitable for boat trailer launching and agricultural use Horizontal or vertical mounting — flexible orientation suits varying trailer and vehicle configurations 50,000+ hour LED lifespan — long-term, low-maintenance operation well beyond incandescent lamp service life 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 380BBSTI12 Lamp Type Stop / Tail / Indicator Voltage 12V DC Dimensions 404mm x 46mm x 17mm Mounting Surface mount (horizontal or vertical) Protection Rating IP67 Compliance ECE (ADR recognised) LED Lifespan 50,000+ hours Warranty 5 years Compatible With / Goes Well With Box trailers, flatbed trailers, caravans, camper trailers, and horsefloats Boat trailers requiring IP67-rated submersible rear lighting Agricultural equipment and commercial vehicle bodies 12V trailer and vehicle electrical systems LED Autolamps number plate lamps, reverse lamps, and side marker lamps LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 380BBSTI12 approved for road use in Australia? Yes. The 380BBSTI12 is ECE road approved, meeting international lighting standards recognised under Australian Design Rules for legal on-road use on trailers and vehicles. Can the 380BBSTI12 be used on a boat trailer? Yes. The IP67 rating covers submersion to 1 metre for 30 minutes, making it suitable for boat trailer use at launch ramps. For saltwater use, rinse the lamp and connections with fresh water after submersion and inspect regularly to maintain sealing integrity. Is the 380BBSTI12 compatible with 24V systems? No. The 380BBSTI12 is rated for 12V DC only and will be damaged by connection to a 24V system. Do I need two lamps for a trailer? Yes. Trailers require combination lamps on both left and right sides for legal compliance. The 380BBSTI12 is sold individually — two units are needed for a complete installation. Can the 380BBSTI12 be mounted vertically? Yes. It supports both horizontal and vertical surface mounting, accommodating different trailer and vehicle panel configurations. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Rear Combination Twin Pack with Sequential Indicator Exclusive Design, No Visible Screws, IP67 Product Overview The LED Autolamps 355ARWM-2 is a premium rear combination lamp twin pack featuring a sequential indicator function and an exclusive design with no visible screws for a clean, seamless appearance. Covering stop, tail, indicator, and reverse functions with an inbuilt reflex reflector, it delivers a modern, high-end rear lighting look for caravans, trailers, and custom vehicle builds. ECE Australian road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Sequential indicator — LEDs sweep progressively across the lamp face rather than flashing uniformly, delivering a premium, modern indicator effect and improved rear conspicuity Exclusive design with no visible screws — flush, seamless appearance with all mounting hardware concealed for a clean, professional finish Inbuilt reflex reflector — integrated passive reflective element for additional rear visibility and compliance Twin pack — both lamps supplied for a complete left and right rear installation ECE Australian road approved — meets international and Australian road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V multivolt — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 355ARWM-2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reverse / Reflector Indicator Type Sequential Voltage Range 12V / 24V Mounting No visible screws Reflector Inbuilt reflex Protection Rating IP67 Compliance ECE (Australian road approved) Warranty 5 years Compatible With / Goes Well With Caravans, trailers, and custom vehicle builds requiring a premium sequential indicator rear combination lamp 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 355ARWM-2 approved for road use in Australia? Yes. The 355ARWM-2 is ECE Australian road approved, meeting international and Australian road approval standards for legal on-road use across all five functions. What does the sequential indicator look like? The sequential indicator sweeps its LEDs progressively across the lamp face in a directional wave — a modern, premium effect that improves rear visibility and gives the vehicle a distinctive, high-end appearance. What does "no visible screws" mean? The mounting hardware is fully concealed behind the lamp housing, resulting in a clean, seamless exterior appearance with no exposed fixings — a premium detail that distinguishes the 355ARWM-2 from standard trailer lamps. What is the IP rating on the 355ARWM-2? The 355ARWM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting. What warranty does the 355ARWM-2 carry? The 355ARWM-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Five Functions. One Light. ADR Approved. IP67. 12/24V Ready. Product Overview The LED Autolamps MAXILAMPC3XRW is a 3-lamp combination tail light combining five functions in a single black chrome unit stop, tail, indicator, reverse, and reflector in a surface-mount 370 × 135 × 40mm housing for 12V and 24V applications. ADR approved across all four active light functions (stop/tail, indicator, reverse) plus ECE-rated reflector, it is a compliant, ready-to-install solution for trailers, trucks, caravans, and commercial vehicles where a multi-function rear lamp meeting Australian Design Rules is required. The IP67 waterproof rating means it handles full immersion to 1 metre boat trailers, stock trailers, and worksite equipment that regularly encounters water, mud, and pressure washing. Pre-wired with a 400mm lead and surface-mount fitment at 269mm centre-to-centre, it is sold individually. 3M tape mounting is available as an option for applications where drilling is not preferred. Key Specifications Part Number: MAXILAMPC3XRW Brand: LED Autolamps Series: Maxilamp Voltage: 12–24V Light Functions: Stop / Tail / Indicator / Reverse / Reflector Light Type: LED Size: 370mm × 135mm × 40mm Mount Centre to Centre: 269mm Mounting: Surface mount Connector: Pre-wired — 400mm lead Housing Colour: Black Chrome IP Rating: IP67 — 100% waterproof ADR Compliance: Stop/Tail: ADR 49/00 Indicator: ADR 6/00 Cat 2A Reverse: ADR 1/00 Reflector: ECE 02 Cat 1A Current Draw: Stop: 0.54A Tail: 0.08A Indicator: 0.77A Reverse: 0.67A 3M Tape Mounting: Available Sold: Individually Features & Benefits Five functions, one unit — stop, tail, indicator, reverse, reflector — A single 370mm housing replaces what would otherwise require separate stop/tail, indicator, reverse, and reflector components. Simplifies installation on trailers, trucks, and caravans — one wiring run, one mounting location, one product to source and replace. ADR approved across all active functions — Stop/tail to ADR 49/00, indicator to ADR 6/00 Cat 2A, reverse to ADR 1/00, and reflector to ECE 02 Cat 1A. Full ADR compliance is required for on-road registered trailers, caravans, and commercial vehicles in Australia — the MAXILAMPC3XRW is correctly specified and approved for these applications. IP67 — full waterproof immersion protection — IP67 means the lamp is dustproof and protected against water immersion to 1 metre depth for up to 30 minutes. Suited to boat trailers regularly launched into waterways, stock trailers exposed to high-pressure washing, and any trailer operating in rain, mud, and creek crossings. A common failure point for tail lights on working trailers — IP67 removes that concern. 12V and 24V — universal voltage range — The 12–24V operating range covers both standard passenger vehicle and caravan tow setups (12V) and truck and heavy vehicle applications (24V) without requiring a separate product for each voltage. One SKU fits both systems. Low current draw across all functions — LED technology keeps current demand minimal across all five functions: 0.54A stop, 0.08A tail, 0.77A indicator, 0.67A reverse. Reduces load on vehicle wiring and trailer connectors — particularly important in 24V truck applications and long cable run trailer setups where voltage drop and heat at connectors are ongoing concerns. Pre-wired 400mm lead — installation-ready — The 400mm pre-wired lead provides cable length for routing through the trailer or vehicle body to the main wiring loom without requiring on-site crimping or connector termination at the lamp. Surface mount at 269mm centre to centre — standard fitment — Standard surface mount with a 269mm bolt centre distance makes the MAXILAMPC3XRW a drop-in replacement for many trailer and truck factory lamp positions. Confirm mounting hole pattern against your existing installation before ordering. Black chrome housing — premium finish — The black chrome design suits premium trailer, boat, and commercial vehicle builds where a clean, consistent aesthetic is required alongside functional compliance. 3M tape mounting available — Optional 3M tape mounting provides an adhesive-fix option for applications where drilling is not preferred or the mounting surface is not suitable for bolting through. Sold individually — Purchased as a single lamp — order the quantity required for your trailer or vehicle configuration. Technical Specs Specification Detail Part Number MAXILAMPC3XRW Brand LED Autolamps Series Maxilamp Voltage 12–24V Light Functions Stop / Tail / Indicator / Reverse / Reflector Light Type LED Size 370mm × 135mm × 40mm Mount Centre to Centre 269mm Mounting Surface mount Connector Pre-wired — 400mm lead Housing Colour Black Chrome IP Rating IP67 Stop Current 0.54A Tail Current 0.08A Indicator Current 0.77A Reverse Current 0.67A ADR — Stop/Tail ADR 49/00 ADR — Indicator ADR 6/00 Cat 2A ADR — Reverse ADR 1/00 Reflector Compliance ECE 02 Cat 1A 3M Tape Option Available Sold Individually Compatible With / Goes Well With Typical Applications: Box trailers and enclosed trailers (registered on-road) Boat trailers — IP67 rated for regular water immersion Stock and farm trailers Caravans and camper trailers Trucks, semi-trailers, and heavy vehicles (12V and 24V) Commercial vehicles requiring ADR-compliant multi-function rear lamps Goes Well With: 7-pin flat trailer connectors and harnesses LED trailer wiring looms 3M tape mounting tape (if surface adhesive mount preferred) LED Autolamps front clearance lights and side markers for matching trailer light sets Frequently Asked Questions Is the MAXILAMPC3XRW ADR approved for registered trailers and vehicles in Australia? Yes — the lamp is ADR approved for stop/tail (ADR 49/00), indicator (ADR 6/00 Cat 2A), and reverse (ADR 1/00), with the reflector meeting ECE 02 Cat 1A. This makes it compliant for on-road registered trailers, caravans, and commercial vehicles in Australia. How many of these lamps do I need for a trailer? The MAXILAMPC3XRW is sold individually. Most standard trailers require two rear combination lamps — one per side. Confirm the lamp configuration required for your specific trailer type and applicable Australian road rules or ADR requirements. Can this lamp be used on a boat trailer that is regularly submerged? Yes — the IP67 rating confirms the lamp is protected against water immersion up to 1 metre depth for up to 30 minutes. This covers standard boat trailer launching and retrieval in waterways. Ensure the pre-wired connector is also appropriately sealed and protected for immersed use. Does this lamp work on both 12V and 24V vehicles? Yes — the MAXILAMPC3XRW operates across the full 12–24V range, making it compatible with both 12V passenger vehicle and caravan tow setups and 24V truck and heavy vehicle electrical systems without modification. What is the mounting hole spacing for this lamp? The surface mount centre-to-centre distance is 269mm. Confirm this measurement against your trailer or vehicle's existing lamp mounting holes before ordering. For new installations, this dimension is the bolt pattern to drill to. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR-Approved Red Reflector with Mounting Bracket Screw-Type Fitting, Twin Pack. Product Overview The LED Autolamps 7035R is a twin pack of red rectangular reflectors with an integrated mounting bracket, designed for screw-type fitting on trailers, caravans, trucks, and other vehicles requiring ADR-compliant red reflective identification. Unlike the adhesive 7030R reflector, the 7035R uses a screw-fit mounting bracket a practical alternative for surfaces where adhesive tape is not suitable, or where a more robust mechanical fixing is preferred. Each reflector measures 93mm x 35mm x 7mm an extremely low-profile design that sits flush against the mounting surface. Fully compliant with ADR/ECE standards, the 7035R meets Australian legal requirements for rear and side reflectors on road vehicles and trailers. The 5-year warranty reflects LED Autolamps' confidence in this product's durability in Australian road conditions. Key Specifications Colour: Red Shape: Rectangle Dimensions: 93mm x 35mm x 7mm Mount: Screw-type fitting with mounting bracket Pack quantity: 2 (twin pack) Compliance: ADR/ECE approved Warranty: 5 years Weight: 0.16kg Packaging: Blister pack Brand: LED Autolamps SKU: 7035R Features & Benefits ADR/ECE approved: Compliant with Australian Design Rules and ECE standards for legal use as a red reflector on Australian road vehicles and trailers Screw-type fitting bracket: A robust mechanical mounting alternative to adhesive reflectors, suitable for surfaces where 3M tape adhesion may not be reliable or where a more secure, removable fixing is preferred Ultra-low profile design: At just 7mm deep, the 7035R sits virtually flush on the mounting surface, maintaining a clean appearance on trailer and vehicle bodywork Twin pack: Two reflectors per pack, providing coverage for both sides of a trailer or vehicle in a single purchase 5-year warranty: LED Autolamps' 5-year warranty covers this product against manufacturing defects Premium quality construction: Robust build quality backed by ADR/ECE certification Technical Specs Specification Detail SKU 7035R Brand LED Autolamps Type Reflector with Mounting Bracket Colour Red Shape Rectangle Dimensions 93mm x 35mm x 7mm Mount Screw-type fitting Pack Quantity 2 (twin pack) Compliance ADR/ECE Warranty 5 Years Weight 0.16kg Packaging Blister pack Compatible With Universal suits all trailers, caravans, and vehicles requiring ADR-compliant red reflectors including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Trucks and commercial vehicles Agricultural and construction trailers Any application where screw-mount fixing is preferred over adhesive Frequently Asked Questions How many reflectors are included in this pack? This blister pack contains two red reflectors with mounting brackets sufficient for both left and right side fitment on a single trailer or vehicle. Is this reflector ADR approved for Australian road use? Yes the 7035R is ADR/ECE approved, meeting Australian legal requirements for red reflectors on trailers and road vehicles. What is the difference between the 7035R and the 7030R? The 7035R uses a screw-type mounting bracket and measures 93mm x 35mm x 7mm. The 7030R uses 3M adhesive tape and measures 70mm x 30mm x 6mm. Choose based on your preferred mounting method and the dimensions that suit your application. Does this reflector require drilling for mounting? Yes the screw-type fitting requires drilling and screws to secure the mounting bracket. For an adhesive-only option with no drilling, refer to the LED Autolamps 7030R. What is covered under the 5-year warranty? The 5-year warranty is provided by LED Autolamps and covers manufacturing defects. Contact your retailer or LED Autolamps directly for warranty claim procedures and terms. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Stop/Tail Lamp with Clear Lens and Chrome Reflector IP67, 5-Year Warranty Product Overview The LED Autolamps 131CRM is a 12/24V stop/tail lamp with a clear lens and internal chrome reflector, sharing the same 134mm x 87mm x 12mm form factor as the 131AM indicator and 131CAM clear indicator lamps. The clear lens presents a clean, colourless appearance when inactive with red stop/tail output activating when the lamp is energised while the chrome reflector maximises LED brightness for strong on-road visibility. ADR road approved, IP67 rated, and mountable in horizontal or vertical orientation. Backed by a 5-year warranty. Features & Benefits Clear lens — clean, modern appearance when inactive; red stop/tail output activates when the lamp is energised Internal chrome reflector — amplifies LED output for stronger, more consistent red stop/tail brightness across the lamp face Horizontal and vertical mount — flexible orientation suits a wide range of panel layouts on trailers and truck bodies ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 131CRM Lamp Type Stop / Tail Lens Colour Clear Reflector Internal chrome Voltage Range 12V / 24V Dimensions 134mm x 87mm x 12mm Mounting Horizontal or vertical surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring surface mount stop/tail lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved stop/tail lighting with a clear lens finish LED Autolamps 131CAM clear lens indicator lamp (same form factor, matching clear lens) LED Autolamps 131AM amber lens indicator lamp (same form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 131CRM approved for road use in Australia? Yes. The LED Autolamps 131CRM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. What does the clear lens look like when inactive? When not energised, the lens appears clear and colourless. The red stop/tail output is produced by the LEDs and only becomes visible when the lamp is activated. How does the 131CRM fit with other 131 series lamps? The 131CRM shares the same 134mm x 87mm x 12mm form factor as the 131AM and 131CAM indicator lamps, making it a natural match for a uniform rear lighting set across stop/tail and indicator functions. What is the IP rating on the 131CRM? The 131CRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 131CRM carry? The 131CRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 9–32V Indicator Lamp with Grommet and Plug Low-Profile Recessed Mount, IP67 Product Overview The LED Autolamps 134AMG is a 9–32V LED indicator lamp with grommet and plug, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 133mm x 160mm x 12mm, it's the grommet-equipped counterpart to the 134AMB supplied in a blister pack with everything needed for a complete, sealed recessed installation. Its wide 9–32V operating range extends beyond standard 12/24V lamps, making it compatible with a broader range of vehicle and equipment electrical systems. ECE approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Grommet and plug included — complete sealed installation kit for a weatherproof recessed fit straight out of the blister pack Wide voltage range 9–32V — compatible with 12V, 24V, and other electrical systems up to 32V Low-profile recessed mount — 12mm depth sits flush with the panel for a clean, integrated finish ECE approved — meets international road approval standards for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 134AMG Lamp Type Indicator Voltage Range 9V – 32V Dimensions 133mm x 160mm x 12mm Included Accessories Grommet, plug Mounting Low-profile recessed Protection Rating IP67 Compliance ECE Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring recessed indicator lamps with grommet and wider voltage compatibility 12V, 24V, and up to 32V vehicle and equipment electrical systems Trailer builds requiring ECE-approved indicator lighting LED Autolamps 134AMB indicator lamp (same series, without grommet) LED Autolamps 133AMG indicator lamp with grommet (12/24V equivalent) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 134AMG approved for road use in Australia? Yes. The 134AMG is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia as an indicator lamp. What is the difference between the 134AMG and the 134AMB? The 134AMG includes a grommet and plug for a complete, sealed recessed installation, while the 134AMB is available in bulk pack without these accessories. Both are ECE-approved 9–32V indicator lamps in the same form factor. How does the 134AMG differ from the 133AMG? The 134AMG operates across 9–32V versus the 133AMG's 12/24V range, making it more versatile for electrical systems that fall outside standard voltage bands. Both share the same 133mm x 160mm x 12mm form factor. What is the IP rating on the 134AMG? The 134AMG is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 134AMG carry? The 134AMG is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Round Stop/Tail Lamp with Red Lens Low-Profile Recessed Mount Product Overview The LED Autolamps 102R is a 12V round stop/tail lamp with a red lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. The flush recessed fit delivers a clean, integrated appearance on trailer and truck body panels, keeping the lamp protected and sitting neatly within the panel surface. ADR road approved and rated IP67, the 102R is a reliable, road-legal stop/tail solution for 12V trailer and vehicle electrical systems. Features & Benefits Red lens — delivers correct red stop/tail output with a consistently coloured lens appearance whether active or inactive Low-profile recessed mount — sits flush with the mounting panel for a clean, integrated finish on trailer and truck bodies ADR road approved — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12V only — designed specifically for 12V trailer and vehicle electrical systems Technical Specs Specification Detail SKU 102R Lamp Type Stop / Tail Lens Colour Red Voltage 12V Mounting Low-profile recessed Protection Rating IP67 Compliance ADR Warranty 1 year Weight 0.4 kg Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed stop/tail lamps 12V trailer and vehicle electrical systems Trailer builds requiring ADR-approved stop/tail lighting LED Autolamps 102A and 102AM indicator lamps (same 102 series round form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102R approved for road use in Australia? Yes. The LED Autolamps 102R is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. What mounting style does the 102R use? The 102R is designed for low-profile recessed mounting, sitting flush with the panel surface for a clean, integrated finish on trailer and truck bodies. What is the IP rating on the 102R? The 102R is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. Is the 102R compatible with 24V systems? No. The 102R is a 12V-only lamp and is not rated for 24V applications. For a multi-voltage equivalent, check the LED Autolamps multi-volt round lamp range. What warranty does the 102R carry? The 102R is backed by a 1-year warranty from LED Autolamps. Weight 0.4 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Round Indicator Lamp with Clear Lens Low-Profile Recessed Mount Product Overview The LED Autolamps 102ACM is a 12/24V round indicator lamp with a clear lens, built for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 130mm in diameter at just 12mm deep, it delivers a flush, integrated finish across a wide range of trailer and vehicle body styles. Surface bases are available for installations requiring surface mounting rather than a recessed fit, giving auto electricians and trailer builders additional flexibility. ADR Australian road approved, IP67 rated, and backed by a 5-year warranty, the 102ACM is the multi-voltage counterpart to the 12V-only 102AC. Features & Benefits Clear lens — presents a clean, colourless appearance when inactive; amber indicator colour activates when the lamp is energised Low-profile recessed mount — 12mm depth sits flush with the mounting panel for a clean, integrated finish Surface bases available — for installations requiring surface mounting rather than recessed fitting; contact F.A.E. for compatible surface base options ADR Australian road approved — meets Australian Design Rules for legal on-road use as an indicator lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 102ACM Lamp Type Indicator Lens Colour Clear Voltage Range 12V / 24V Diameter 130mm Depth 12mm Mounting Low-profile recessed (surface base available) Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Trailers, caravans, trucks, and commercial vehicles requiring recessed indicator lamps 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR-approved indicator lighting with a clear lens finish Compatible surface mount bases (available separately — confirm with F.A.E.) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 102ACM approved for road use in Australia? Yes. The LED Autolamps 102ACM is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp. How does the 102ACM differ from the 102AC? The 102ACM operates on both 12V and 24V systems, while the 102AC is a 12V-only lamp. Both share the same 130mm round clear lens recessed mount form factor. What mounting options are available for the 102ACM? The 102ACM is designed for low-profile recessed mounting. Surface bases are also available for surface mount installations — contact F.A.E. for compatible options. What is the IP rating on the 102ACM? The 102ACM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 102ACM carry? The 102ACM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

LED Autolamps 100BSTIM Stop Tail and Indicator Lamp 100x100mm with Bracket An ADR road-approved LED stop, tail, and indicator lamp from the LED Autolamps Original Square Series, the 100BSTIM features an IP67 rating, clip-in replaceable lens, surface mount bracket, pre-wired connector, and operates across 12-24V DC, backed by a 5-year warranty. Product Overview The LED Autolamps 100BSTIM is a combined stop, tail, and indicator lamp from the Original Square Series, designed for surface mount installation on trailers, caravans, and commercial vehicles. The unit measures 122 x 122 x 31mm overall with a centre-to-centre mounting distance of 70mm and is housed in a black housing. The clip-in replaceable lens allows lens replacement without full unit replacement if the lens is damaged. The 100BSTIM operates across a 12-24V DC voltage range and draws 0.17A for stop, 0.04A for tail, and 0.18A for indicator functions at 13.8V. IP67-rated for waterproof and dustproof protection, ADR road approved with individual compliance numbers for stop, tail, and indicator functions, and supplied with a bracket in blister packaging. Features & Benefits Original Square Series Design: The 100BSTIM is from LED Autolamps' Original Square Series, featuring the distinctive 100x100mm square lamp profile suited to trailers, caravans, and commercial vehicles. ADR Road Approved: The 100BSTIM holds ADR road approval (CTA060218) with individual compliance numbers for stop (CRN35781), tail (CRN35782), and indicator (CRN35783) functions, confirming it meets Australian Design Rules requirements for on-road use. IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust ingress protection and waterproof protection against temporary immersion, suited to exposed trailer and caravan mounting locations. Clip-In Replaceable Lens: The clip-in lens design allows the lens to be replaced without replacing the full lamp unit, reducing long-term maintenance costs if the lens is scratched or damaged. Combined Stop, Tail, and Indicator Functions: The 100BSTIM combines stop, tail, and indicator functions in a single compact unit, reducing the number of individual lamp assemblies required and simplifying wiring. 12-24V DC Operating Range: The 100BSTIM operates across 12-24V DC, making it compatible with both 12V passenger vehicle and trailer systems and 24V commercial vehicle and trailer systems. Surface Mount with Bracket Included: The 100BSTIM is supplied with a surface mount bracket for secure installation to trailer, caravan, or vehicle body panels with a 70mm centre-to-centre mounting distance. Pre-Wired Connector: The lamp is supplied pre-wired for straightforward connection to the trailer or vehicle wiring harness without requiring additional connector assembly. 5-Year Warranty: The 100BSTIM is backed by a 5-year LED Autolamps warranty. Technical Specs Specification Detail SKU 100BSTIM Brand LED Autolamps Series Original Square Series Light Style Stop, Tail, and Indicator Light Type LED Housing Colour Black Overall Dimensions 122mm x 122mm x 31mm Mount Centre-to-Centre 70mm Mount Type Surface Mount Input Voltage 12-24V DC Current Draw - Stop 0.17A at 13.8V Current Draw - Tail 0.04A at 13.8V Current Draw - Indicator 0.18A at 13.8V IP Rating IP67 Lens Clip-In Replaceable Connector Pre-Wired ADR Approval CTA060218 Stop Compliance CRN35781 Tail Compliance CRN35782 Indicator Compliance CRN35783 Weight 0.28kg Packaging Blister Warranty 5 Years Compatible With The 100BSTIM is compatible with 12V and 24V DC trailer, caravan, and vehicle electrical systems. ADR road approved for on-road use in Australia. Confirm mounting clearance and wiring requirements for your specific trailer or vehicle before purchase. Frequently Asked Questions Is the 100BSTIM ADR approved for on-road use in Australia? Yes. The 100BSTIM holds ADR approval (CTA060218) with individual compliance numbers for stop (CRN35781), tail (CRN35782), and indicator (CRN35783) functions, confirming it meets Australian Design Rules requirements for on-road use. Can the lens on the 100BSTIM be replaced if damaged? Yes. The 100BSTIM features a clip-in replaceable lens design, allowing the lens to be replaced without replacing the full lamp unit if the lens is scratched or damaged. Is the 100BSTIM suitable for 24V vehicles and trailers? Yes. The 100BSTIM operates across a 12-24V DC voltage range, making it compatible with both 12V and 24V vehicle and trailer electrical systems. What is the mounting centre-to-centre distance of the 100BSTIM? The 100BSTIM has a mounting centre-to-centre distance of 70mm. Confirm this measurement suits your specific mounting panel and bracket location before purchase. Does the 100BSTIM include a mounting bracket? Yes. The 100BSTIM is supplied with a surface mount bracket for installation to trailer, caravan, or vehicle body panels. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR and ECE Approved Amber/Red Side Marker A Direct Globe Replacement for Trucks, Trailers, and Commercial Vehicles. Product Overview The LED Autolamps 69ARM is an amber/red side marker light designed as a retrofit replacement for traditional globe-type side marker lamps on trucks, semi-trailers, caravans, and commercial vehicles. Carrying both ADR and ECE road approvals, it meets Australian compliance requirements while also satisfying European ECE certification suitable for imported vehicles and fleet operators across multiple compliance frameworks. Rated at multivolt 12V to 24V and IP67 waterproof, the 69ARM installs directly into existing globe-type side marker housings with no modification required. The LED light source eliminates the globe replacement cycle, reducing ongoing maintenance cost and vehicle downtime on fleet trucks and trailers where side marker globe failures are a routine service item. Backed by a 5-year warranty and sold individually as a blister pack. Key Specifications Colour: Amber/Red Light style: Side marker light Voltage: 12V – 24V (multivolt) IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes Compliance: ADR and ECE road approved Design: Retrofit — replaces globe type Dimensions: 120mm (L) × 64mm (W) × 22mm (D) Packaging: Blister pack Sold as: Each Warranty: 5 years Current draw: Not specified — confirm with LED Autolamps Mount type: Not specified — confirm with LED Autolamps Connector type: Not specified — confirm with LED Autolamps Compliance codes: Not specified — confirm with LED Autolamps Features & Benefits Retrofit Globe Replacement Design — Engineered to fit directly into existing globe-type side marker lamp housings without modification, making it a straightforward upgrade for vehicles and trailers currently running incandescent globe side markers. ADR and ECE Road Approved — Dual compliance covering both Australian Design Rules and European ECE regulations — suited to Australian-registered vehicles and imported commercial vehicles requiring multi-standard certification. IP67 Waterproof Rating — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes — protected against wash-downs, rain, and road spray in Australian transport and touring conditions. 12V – 24V Multivolt — Works natively on both 12V and 24V systems without modification, covering passenger vehicles, caravans, and 24V commercial trucks in a single SKU. No Globe Replacement Required — LED technology eliminates the routine globe replacement cycle. On fleet vehicles running numerous side markers, this reduces procurement cost, labour, and vehicle downtime associated with regular globe servicing. 5-Year Warranty — A 5-year manufacturer's warranty provides long-term confidence well beyond the service life of the globe-type lamp it replaces. Technical Specs Specification Detail Brand LED Autolamps Part Number 69ARM Colour Amber/Red  Light Style Side Marker Light Light Type LED Voltage 12V – 24V (Multivolt) IP Rating IP67 Compliance ADR Road Approved / ECE Approved Compliance Codes Not specified — confirm with LED Autolamps Design Retrofit — Replaces Globe Type Length 120mm Width 64mm Depth 22mm Packaging Blister Pack Sold As Each Current Draw Not specified Mount Type Not specified Connector Type Not specified Warranty 5 Years Compatible With / Goes Well With Suitable vehicle and trailer types: Trucks and semi-trailers (12V and 24V systems) with existing globe-type side marker housings B-doubles and road trains requiring side marker compliance Caravans and camper trailers Box trailers and flatbed trailers Buses and coaches Imported commercial vehicles requiring ECE compliance Any vehicle currently running globe-type side markers Pairs well with: LED Autolamps 69RM rear end outline marker (matching retrofit globe replacement in the same range) LED Autolamps combination stop/tail/indicator lamp assemblies LED Autolamps 58RM rear position markers Frequently Asked Questions Is the 69ARM an amber lamp, a red lamp, or does it provide both colours? The supplier lists this product as "Amber/Red" but does not clarify whether this is a single lamp with dual amber and red output zones, or whether the SKU covers two separate colour variants sold individually. Confirm with LED Autolamps before purchasing to ensure you receive the correct colour for your application. Does the 69ARM require a new housing or does it fit an existing globe-type fitting? The 69ARM is designed as a retrofit replacement for existing globe-type side marker lamp housings — intended to fit directly without modification. Confirm dimensional compatibility with your specific housing before purchasing, as housing profiles vary across vehicle makes and models. Will the 69ARM work on both 12V and 24V vehicles? Yes. The multivolt 12V to 24V operating range covers both light passenger and recreational vehicles and 24V heavy commercial trucks without any modification or voltage-specific variants. What does IP67 mean for a side marker lamp? IP67 means the lamp is completely sealed against dust and can withstand water immersion to 1 metre for 30 minutes — protecting it against rain, road spray, wash-downs, and wet crossings encountered in Australian transport and touring conditions. Does the 69ARM carry specific ADR compliance codes for documentation purposes? ADR and ECE approvals are confirmed by the supplier, but specific compliance code numbers (equivalent to CRN 36840 on the 69RM) are not included in the supplier data for this SKU. Contact LED Autolamps for the specific approval numbers if required for fleet compliance documentation. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

To Ensure Excellence in The Quality of Finished Products, J.W. Speaker’s In-House Capabilities J.W. Speaker 990145 Features: Super bright: 120/60 LM Lumen Colour Temp : 6000K White Ultra Longer Life Operating voltage: DC 12V - 24 V / Low Current Draw- Operating Temp: -40° / +80° C (130° Max) Shock Resistant Not approved for ADR, ECE or DOT J.W. Speaker 990145 Specifications: Globe Base BA15s Globe Style Bayonet Watts 10/5 Voltage 12 or 24 Pack Qty 2 Globe Type LED Weight 2.5kg Legendary Products & Support From Authorized Dealers When you choose JW Speaker, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized JW Speaker dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by JW Speaker's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized JW Speaker dealer today!

Read more less