HELLA 2559 Licence Plate Light LED 9 to 33V ADR 48/00 compliant LED licence plate light with IP67 sealed construction, insulated earth circuit compatibility, 0.5m pre-wired cable, and 5-year warranty, suited to trucks, trailers, and heavy commercial vehicles operating across 9–33V electrical systems. Note: 2 lights are required to achieve ADR 48/00 compliance. Product Overview The HELLA 2559 is a compact LED licence plate light delivering ADR 48/00 compliant number plate illumination for trucks, trailers, and heavy commercial vehicles. Designed for surface mount installation on rear panels, trailer tailgates, and number plate brackets, the 2559 provides clean, efficient LED illumination of the rear licence plate across a wide 9–33V Multivolt input range covering both 12V and 24V heavy vehicle electrical systems. An important compliance note: two HELLA 2559 units are required to meet ADR 48/00 licence plate lighting requirements for heavy vehicles. This dual-lamp requirement is standard for ADR 48/00 compliance on trucks and trailers and should be accounted for when purchasing. The 2559 is suitable for use on insulated earth circuits, making it compatible with the isolated earth wiring configurations found on many trailer electrical systems where the trailer body is not used as the earth return path. The compact 85 x 70 x 38mm body installs neatly onto rear panels and number plate brackets with a 40mm centre-to-centre mounting distance, and the 0.5m pre-wired cable provides sufficient length for connection into trailer rear wiring circuits without requiring extension cabling at the light unit. Fully sealed to IP67 against dust and water ingress, the 2559 is well suited to the exposed rear panel and under-body environments typical of trailer licence plate mounting positions. HELLA's five-year warranty provides long-term confidence for fleet operators, trailer manufacturers, and transport companies. Features & Benefits ADR 48/00 Compliant: Meets Australian Design Rule 48/00 for licence plate lamps on heavy vehicles, confirming the 2559 is road-legal for rear licence plate illumination on trucks and trailers operating on Australian public roads. Note: 2 units are required to achieve full ADR 48/00 compliance. LED Light Technology: Maintenance-free LED illumination delivers a significantly longer operational lifespan than incandescent licence plate lamps, reducing the frequency of lamp replacements on large trailer fleets and minimising compliance risk from failed plate lights during roadside inspections. Insulated Earth Circuit Compatible: Suitable for insulated earth wiring configurations where the trailer body is not used as the earth return path, ensuring compatibility with the isolated earth trailer electrical systems commonly specified on modern semi-trailers and refrigerated bodies. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed rear panel and under-body mounting positions typical of trailer licence plate lighting installations. 9–33V Multivolt Input: Covers the full range of 12V and 24V heavy vehicle electrical systems in a single unit without requiring voltage-specific variants, simplifying procurement for mixed fleet and workshop environments. Pre-Wired 0.5m Cable: Factory-fitted 0.5m cable provides sufficient length for connection into trailer rear wiring circuits without requiring extension cabling at the light unit, simplifying installation on rear panels and number plate brackets. Compact 85 x 70mm Surface Mount Profile: Low-profile body installs neatly onto rear panels, trailer tailgates, and number plate brackets with a 40mm centre-to-centre mounting distance, maintaining a clean rear panel appearance. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2559 Voltage Input 9–33V Light Type LED Light Function Licence Plate Illumination Mount Type Surface Mount Mount Centre-to-Centre 40mm Connector Pre-Wired Cable Length 0.5m Ingress Protection IP67 Compliance ADR 48/00 Insulated Earth Compatible Units for ADR Compliance 2 Dimensions (L×W×H) 85 × 70 × 38mm Warranty Five Years Compatible With / Goes Well With The HELLA 2559 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant LED licence plate illumination. Primary applications include semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, car carriers, livestock trailers, and heavy plant transport trailers requiring rear number plate compliance. Pairs well with the full HELLA truck and trailer lighting range including the 2431 Triple Jumbo-S combination lamp, 2430 Triple Jumbo-S stop/tail/indicator lamp, DuraLED COMBI-SR combination lamps, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK for a complete matched HELLA rear lighting solution, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional licence plate lamp installations. Frequently Asked Questions Why are 2 units required for ADR 48/00 compliance? ADR 48/00 prescribes specific illumination coverage requirements for rear licence plate lighting on heavy vehicles, including minimum light output levels and coverage angles across the full plate area. A single lamp unit positioned on one side of the plate does not provide sufficient even illumination across the full plate width to satisfy these requirements. Two lights, positioned at each end of the plate, together provide the combined illumination coverage needed to achieve full ADR 48/00 compliance. Always purchase and fit two HELLA 2559 units when specifying for ADR-compliant licence plate illumination. What does "insulated earth compatible" mean for this lamp? Insulated earth circuits are trailer wiring configurations where the trailer body or chassis is not used as the electrical earth return path. Instead, a dedicated earth wire is run back through the wiring harness to the towing vehicle or a separate earth point. Many modern semi-trailers and refrigerated bodies specify insulated earth wiring to prevent corrosion, voltage drop, and earth continuity issues common in chassis-earth systems. The 2559's insulated earth compatibility ensures it operates correctly in both standard chassis-earth and insulated earth trailer wiring configurations. What does ADR 48/00 compliance mean for licence plate lights? ADR 48/00 is the Australian Design Rule governing licence plate lamps on vehicles, specifying the minimum illumination output, coverage area, and colour requirements needed to ensure the rear number plate is clearly readable at a prescribed distance. Compliance confirms the 2559 meets these legal requirements for use as a licence plate lamp on trucks and trailers operating on Australian public roads. Fitting non-compliant or failed licence plate lighting is a common defect identified during roadside heavy vehicle inspections. Can the 2559 be used on both 12V and 24V trailer systems? Yes. The 2559 operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single unit covers both voltage levels without requiring separate variants, making it suitable for workshop and fleet environments managing mixed 12V and 24V trailer fleets. How is the 2559 installed on a trailer rear panel? The 2559 uses a surface mount design with a 40mm centre-to-centre mounting distance, installed directly onto the rear panel, tailgate, or number plate bracket adjacent to the licence plate. The pre-wired 0.5m cable connects into the trailer's rear wiring circuit at the licence plate lamp feed. Two units should be positioned at each end of the number plate to achieve even illumination coverage across the full plate width for ADR 48/00 compliance. Waterproof connectors and heat-shrink terminals are recommended for a sealed, professional installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2559BULK Licence Plate Light LED 9 to 33V 8 Pce ADR 48/00 compliant LED licence plate light in a bulk pack of 8, with 2.5m pre-wired cable, 20mm mounting spacer included, IP67 sealed construction, and 5-year warranty, suited to trucks, trailers, and heavy commercial vehicles on 12–24V systems. Note: 2 lights are required per vehicle to achieve ADR 48/00 compliance. Product Overview The HELLA 2559BULK is the bulk pack variant of the HELLA 2559 LED licence plate light, supplying 8 units in a single purchase for fleet operators, trailer manufacturers, and workshop professionals requiring volume stock for ongoing trailer builds, refurbishments, and maintenance. Each unit in the pack delivers ADR 48/00 compliant LED number plate illumination across a 12–24V input range, maintaining the same IP67 ingress protection and five-year warranty as the individual 2559 unit. A key practical difference from the individual 2559 is the significantly longer 2.5m pre-wired cable on the 2559BULK, providing ample routing length for installations where the trailer wiring connection point is located further from the licence plate mounting position — particularly useful on longer trailer bodies, rear-access refrigerated units, and tailgate-mounted installations where a 0.5m cable may fall short. Each unit is also supplied with a 20mm mounting spacer, providing a stand-off distance from the mounting surface that assists with positioning the lamp at the correct angle and height relative to the licence plate for optimal illumination coverage and ADR 48/00 compliance. With two units required per vehicle for ADR compliance, the pack of 8 provides sufficient stock for four complete ADR-compliant licence plate lighting installations, making the 2559BULK a practical procurement choice for trailer builders and fleet maintenance workshops managing regular fitment volumes. HELLA's five-year warranty applies to each unit in the pack. Features & Benefits Pack of 8 for Fleet and Workshop Procurement: Bulk pack of eight units provides sufficient stock for four complete two-lamp ADR-compliant licence plate lighting installations, streamlining procurement and reducing per-unit cost for trailer builders, fleet operators, and workshop environments with regular fitment volumes. ADR 48/00 Compliant: Meets Australian Design Rule 48/00 for licence plate lamps on heavy vehicles, confirming each unit is road-legal for rear licence plate illumination on trucks and trailers operating on Australian public roads. Two units per vehicle are required for full ADR 48/00 compliance. 20mm Mounting Spacer Included: A 20mm mounting spacer is supplied with each unit, providing a stand-off distance from the mounting surface to assist with correct lamp positioning and angle relative to the licence plate for optimal illumination coverage and ADR compliance. 2.5m Pre-Wired Cable: The generous 2.5m cable provides ample length for routing from the licence plate mounting position to the trailer rear wiring circuit connection point, accommodating longer trailer bodies, rear-access refrigerated units, and tailgate-mounted installations where shorter cable lengths are insufficient. LED Light Technology: Maintenance-free LED illumination delivers a significantly longer operational lifespan than incandescent licence plate lamps, reducing the frequency of lamp replacements on large trailer fleets and minimising compliance risk from failed plate lights during roadside inspections. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed rear panel and under-body mounting positions typical of trailer licence plate lighting installations. 12–24V Universal Input: Compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers, eliminating the need for separate voltage variants across mixed fleets. HELLA 5-Year Warranty: Each unit in the pack is backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2559BULK Pack Contents 8 lights Voltage Input 12–24V Light Type LED Light Function Licence Plate Illumination Mount Centre-to-Centre 40mm Connector Pre-Wired Cable Length 2.5m Ingress Protection IP67 Compliance ADR 48/00 Mounting Spacer 20mm (included) Units for ADR Compliance 2 per vehicle Warranty Five Years Compatible With / Goes Well With The HELLA 2559BULK is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant LED licence plate illumination. Primary applications include semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, car carriers, livestock trailers, and heavy plant transport trailers. The bulk pack of 8 is particularly suited to trailer manufacturing facilities, fleet maintenance workshops, and transport companies managing ongoing trailer build and refurbishment programs. Pairs well with the full HELLA truck and trailer lighting range including the 2431 Triple Jumbo-S combination lamp, 2430 Triple Jumbo-S stop/tail/indicator lamp, DuraLED COMBI-SR combination lamps, HELLA marker light packs including the 2051BULK, 2053BULK, 2054BULK, 2026BULK, and 2307BULK for a complete matched HELLA rear lighting solution, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional licence plate lamp installations. Frequently Asked Questions How does the 2559BULK differ from the individual HELLA 2559 licence plate light? Both products are the same LED licence plate light unit with identical IP67 rating, ADR 48/00 compliance, and five-year warranty. The key differences are pack quantity, cable length, and included accessories. The 2559BULK supplies 8 units in a single purchase with a longer 2.5m cable and an included 20mm mounting spacer per unit, while the individual 2559 is sold as a single unit with a 0.5m cable and no spacer. Choose the 2559BULK for volume procurement, trailer builds, and installations where the longer 2.5m cable length is required. Why are 2 units required for ADR 48/00 compliance? ADR 48/00 prescribes minimum illumination output and coverage angle requirements across the full rear licence plate area. A single lamp positioned on one side of the plate does not provide sufficient even illumination across the full plate width to satisfy these requirements. Two lights, positioned at each end of the plate, provide the combined illumination coverage needed for full ADR 48/00 compliance. The 2559BULK pack of 8 provides enough units for four complete two-lamp ADR-compliant installations. What is the 20mm mounting spacer used for? The 20mm mounting spacer provides a stand-off distance between the lamp base and the mounting surface, positioning the light unit at a set distance from the rear panel or number plate bracket. This assists with achieving the correct lamp angle and height relative to the licence plate for optimal illumination coverage across the full plate area, and can also assist with routing the pre-wired cable neatly behind the mounting surface. The spacer is included with each unit in the bulk pack. Can the 2559BULK be used on both 12V and 24V trailer systems? Yes. The 2559BULK operates across a 12–24V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single unit covers both voltage levels without requiring separate variants, making the bulk pack practical for workshop and fleet environments managing mixed 12V and 24V trailer fleets. How is the 2559BULK installed on a trailer rear panel? Each unit uses a surface mount design with a 40mm centre-to-centre mounting distance, installed directly onto the rear panel, tailgate, or number plate bracket adjacent to the licence plate. The 20mm mounting spacer can be fitted between the lamp base and the mounting surface for correct positioning. The 2.5m pre-wired cable connects into the trailer's rear wiring circuit at the licence plate lamp feed. Two units should be positioned at each end of the number plate for even illumination and ADR 48/00 compliance. Waterproof connectors and heat-shrink terminals are recommended for a sealed, professional installation.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2033 Side Marker Light Red/Amber LED 9 to 33V ADR 45/01 compliant red/amber LED side marker light with Ultra Wide Visibility Optics, stealth clear-until-illuminated lens, impact-resistant polycarbonate lens, nylon base, and 5-year warranty, purpose-built for trucks, trailers, and heavy commercial vehicles requiring enhanced side conspicuity across 9–33V electrical systems. Product Overview The HELLA 2033 is a premium LED side marker light delivering ADR 45/01 compliant side marking illumination for trucks, trailers, semi-trailers, and heavy commercial vehicles. Supplied in red/amber, the 2033 covers both forward amber and rear red side marking requirements. What distinguishes the 2033 from standard side marker lamps is the combination of HELLA's UWVO (Ultra Wide Visibility Optics) and a clear-until-illuminated stealth lens design. UWVO technology significantly extends the horizontal visibility angle of the side marker beyond the standard forward-facing cone of conventional marker lamps, improving side conspicuity to adjacent traffic, pedestrians, and road users approaching from oblique angles. The stealth optical design means the lens appears completely clear and uncoloured when unlit, only revealing its red or amber illumination when powered on, providing a clean and modern vehicle profile during daylight hours. The impact-resistant polycarbonate lens is a step up from standard acrylic lens construction, offering greater resistance to stone strikes, road debris, and physical impacts common in the side panel environments of heavy transport vehicles travelling at highway speeds. The nylon base provides robust impact resistance and chemical resistance at the mounting point, suited to the side rail and body panel environments of trailers and truck bodies. At 3.2W total power consumption and 0.3A at 12V, the 2033 operates at a significantly lower electrical draw than incandescent side marker alternatives, reducing load on trailer circuits. Fully sealed to IP67, pre-wired with a 2.5m multi-core cable, and compatible with the full 9–33V range covering both 12V and 24V systems, the 2033 is a comprehensive premium side marker solution for the Australian heavy transport market. HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers. Features & Benefits UWVO Ultra Wide Visibility Optics: HELLA's Ultra Wide Visibility Optics technology significantly extends the horizontal visibility angle of the side marker beyond the standard forward-facing cone of conventional lamps, improving conspicuity to adjacent traffic, pedestrians, and road users approaching from oblique angles along the vehicle's side. Clear-Until-Illuminated Stealth Lens: The lens appears completely clear and uncoloured when the light is off, providing a clean and modern vehicle profile during daylight. When powered, the optics produce bright red or amber side marker illumination, a premium stealth finish widely specified for modern truck and trailer builds and fleet refurbishments. Impact-Resistant Polycarbonate Lens: The polycarbonate lens offers greater impact resistance than standard acrylic alternatives, providing superior protection against stone strikes, road debris, and physical knocks common in the side panel environments of heavy transport vehicles operating at highway speeds. Nylon Base Construction: Impact and chemical resistant nylon base provides robust protection at the mounting point, suited to the side rail and body panel environments of trailers and truck bodies subject to road debris, chemical washdowns, and physical contact. ADR 45/01 Compliant: Meets Australian Design Rule 45/01 for reflex reflectors and end-outline marker lamps on heavy vehicles, confirming the 2033 is road-legal for side marker light applications on trucks and trailers operating on Australian public roads. Red/Amber for Full Side Marking Coverage: Supplied in both red and amber to cover forward amber and rear red side marking requirements on the same vehicle, simplifying procurement for trailer builders and fleet operators. 3.2W Efficient LED Operation: At just 3.2W total power consumption and 0.3A at 12V, the 2033 draws significantly less current than equivalent incandescent side marker lamps, reducing electrical load on trailer circuits and minimising heat generation at the lamp mounting point. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed side panel environments typical of heavy transport operation. Pre-Wired 2.5m Multi-Core Cable: Generous 2.5m factory-fitted cable provides ample length for routing along trailer side rails and body frames to the wiring circuit connection point without requiring extension wiring. 9–33V Universal Input: Compatible with both 12V and 24V heavy vehicle electrical systems in a single unit, eliminating the need for separate voltage variants across mixed fleets. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2033 Voltage Input 9–33V Light Type LED Light Function Side Marker Lens Material Polycarbonate Lens Appearance Clear (red/amber when illuminated) Base Material Nylon Current Draw 0.3A @ 12V Power Consumption 3.2W at 12 or 24V DC Mount Type Surface Mount Connector Pre-Wired Cable Length 2.5m Ingress Protection IP67 Compliance ADR 45/01 Dimensions (L×W×H) 140 × 65 × 32mm Colour Red / Amber Warranty Five Years Compatible With / Goes Well With The HELLA 2033 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant premium LED side marker lighting with enhanced side visibility. Primary applications include semi-trailers and B-trains, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies, livestock trailers, car carriers, and heavy plant transport trailers requiring side marker lamp compliance with improved wide-angle visibility. Pairs well with the HELLA 2053BULK red/amber side marker bulk pack for mixed fleet procurement, HELLA front marker packs including the 2051BULK and 2054BULK, 2026BULK cab marker pack, 2307BULK rear marker light, HELLA combination lamps including the 2430, 2431, and DuraLED COMBI-SR series for a complete matched HELLA truck and trailer lighting solution, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional side rail wiring installations. Frequently Asked Questions How does the 2033 differ from the HELLA 2053BULK side marker pack? Both products are ADR 45/01 compliant red/amber LED side marker lights. The 2033 is a premium individual unit featuring UWVO Ultra Wide Visibility Optics, a clear-until-illuminated stealth lens, impact-resistant polycarbonate lens, and nylon base construction with a 140 x 65mm body. The 2053BULK is a bulk pack of four smaller 60 x 38mm side marker lights without the UWVO optics or stealth lens feature. Choose the 2033 where enhanced side visibility, larger lamp presence, and stealth aesthetics are priorities, and the 2053BULK where volume procurement of compact units is the primary requirement. What does UWVO Ultra Wide Visibility Optics mean in practice? UWVO (Ultra Wide Visibility Optics) extends the horizontal visibility angle of the side marker beyond the standard forward-facing cone of conventional side marker lamps. In practice, road users approaching from oblique angles alongside the vehicle — including drivers in adjacent lanes, cyclists, and pedestrians — can see the side marker illuminating across a significantly wider horizontal arc than a standard lamp. This is particularly valuable on long semi-trailers and B-trains where wide-angle side visibility along the full vehicle length is important for road safety. What is the difference between the red and amber variants? Amber side markers are fitted towards the front of the vehicle and indicate the forward extent of the vehicle's length to oncoming and adjacent traffic. Red side markers are fitted towards the rear of the vehicle consistent with red rear-facing lighting conventions. ADR 45/01 requires the correct colour to be fitted in the correct position. Confirm the required colour for each mounting position when ordering to ensure compliant installation. What does ADR 45/01 compliance mean for side marker lights? ADR 45/01 is the Australian Design Rule covering reflex reflectors and end-outline marker lamps on heavy vehicles. Compliance confirms the 2033 meets the legal requirements for side marker light applications on trucks and trailers operating on Australian public roads, including prescribed light output, colour, and visibility angles. Fitting ADR-compliant side marker lighting is a legal requirement for heavy vehicle roadworthiness in Australia. Is the 2033 compatible with both 12V and 24V trailer systems? Yes. The 2033 operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single unit covers both voltage levels without modification, making it suitable for workshop and fleet environments managing mixed 12V and 24V trailer fleets.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2031 Side Indicator Light LED 9 to 33V ADR 6/00 Category 5 compliant LED supplementary side direction indicator with Ultra Wide Visibility Optics, impact-resistant polycarbonate lens, nylon base, and 5-year warranty, purpose-built for trucks, trailers, and heavy commercial vehicles requiring enhanced side indicator conspicuity across 9–33V electrical systems. Product Overview The HELLA 2031 is a premium LED supplementary side direction indicator designed to deliver ADR 6/00 Category 5 compliant side indicator illumination on trucks, trailers, semi-trailers, and heavy commercial vehicles. As a supplementary side indicator, the 2031 is mounted on the side of the vehicle to make indicating and turning manoeuvres visible to road users alongside and approaching from oblique angles, supplementing the primary rear and front indicator lamps. The defining feature of the 2031 is HELLA's UWVO (Ultra Wide Visibility Optics) technology, which significantly extends the horizontal visibility angle of the indicator beyond the standard forward-facing visibility cone of conventional side indicator lamps. This wide-angle optics performance is particularly valuable on long semi-trailers, B-trains, and rigid trucks where following drivers, cyclists, and adjacent traffic need clear and early visibility of indicator activation across a broad horizontal arc during lane changes and turning manoeuvres. The impact-resistant polycarbonate lens delivers greater resistance to stone strikes, road debris, and physical impacts than standard acrylic alternatives, suited to the exposed side panel environments of heavy transport vehicles at highway speeds. The nylon base provides robust impact and chemical resistance at the mounting point on trailer side rails and body panels. At 3.2W total power consumption and 0.3A at 12V, the 2031 operates at a fraction of the draw of incandescent side indicator alternatives, reducing electrical load on trailer and vehicle circuits. Sharing the same 140 x 65 x 32mm footprint and construction specification as the HELLA 2033 side marker, the 2031 integrates seamlessly into matched side lighting installations where both side marker and side indicator functions are required on the same vehicle. Fully sealed to IP67 and compatible with the full 9–33V range covering both 12V and 24V systems, HELLA's five-year warranty provides long-term confidence for fleet operators and trailer manufacturers. Features & Benefits UWVO Ultra Wide Visibility Optics: HELLA's Ultra Wide Visibility Optics technology significantly extends the horizontal visibility angle of the side indicator beyond the standard forward-facing cone of conventional lamps, improving conspicuity to adjacent traffic, cyclists, and road users approaching from oblique angles during lane changes and turning manoeuvres on heavy vehicles. Supplementary Side Direction Indicator: Functions as a dedicated side-mounted supplementary indicator lamp, making turning and lane-change signals visible to road users positioned alongside and diagonally behind the vehicle where rear and front indicator lamps may not be visible, improving active safety on long-wheelbase trucks and trailers. Impact-Resistant Polycarbonate Lens: The polycarbonate lens offers greater impact resistance than standard acrylic alternatives, providing superior protection against stone strikes, road debris, and physical knocks common in the side panel environments of heavy transport vehicles operating at highway speeds. Nylon Base Construction: Impact and chemical resistant nylon base provides robust protection at the mounting point, suited to the side rail and body panel environments of trailers and truck bodies subject to road debris, chemical washdowns, and physical contact. ADR 6/00 Category 5 Compliant: Meets Australian Design Rule 6/00 Category 5 for supplementary side direction indicator lamps on heavy vehicles, confirming the 2031 is road-legal for side indicator applications on trucks and trailers operating on Australian public roads. 3.2W Efficient LED Operation: At just 3.2W total power consumption and 0.3A at 12V, the 2031 draws significantly less current than equivalent incandescent side indicator lamps, reducing electrical load on trailer and vehicle circuits and minimising heat generation at the lamp mounting point. IP67 Sealed Construction: Fully dust-tight and protected against temporary water immersion, providing robust moisture and ingress protection for the exposed side panel environments typical of heavy transport operation. Matched 140 x 65mm Footprint with HELLA 2033: Shares the same body dimensions and construction specification as the HELLA 2033 side marker light, enabling clean matched-pair installations where both side indicator and side marker functions are required on the same vehicle. 9–33V Universal Input: Compatible with both 12V and 24V heavy vehicle electrical systems in a single unit, eliminating the need for separate voltage variants across mixed fleets. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2031 Voltage Input 9–33V Light Type LED Light Function Supplementary Side Indicator Lens Material Polycarbonate Base Material Nylon Current Draw 0.3A @ 12V Power Consumption 3.2W at 12 or 24V DC Mount Type Surface Mount Connector Pre-Wired Ingress Protection IP67 Compliance ADR 6/00 Category 5 Dimensions (L×W×H) 140 × 65 × 32mm Warranty Five Years Compatible With / Goes Well With The HELLA 2031 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring ADR-compliant LED supplementary side indicator lighting. Primary applications include semi-trailers and B-trains requiring wide-angle side indicator visibility, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers, tipper bodies and tipping trailers, rigid trucks and bus bodies with long wheelbases, livestock trailers, car carriers, and heavy plant transport trailers where side indicator visibility to adjacent traffic is a road safety priority. Pairs well with the HELLA 2033 red/amber side marker light as a matched-dimension side lighting pair, HELLA front marker packs including the 2051BULK and 2054BULK, 2026BULK cab marker pack, 2307BULK rear marker light, HELLA combination lamps including the 2430, 2431, and DuraLED COMBI-SR series for a complete matched HELLA truck and trailer lighting solution, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional side rail wiring installations. Frequently Asked Questions What is the difference between the HELLA 2031 side indicator and the HELLA 2033 side marker? Both lamps share identical dimensions of 140 x 65 x 32mm, polycarbonate lens, nylon base, UWVO optics, IP67 rating, 3.2W power consumption, 9–33V input, and five-year warranty. The difference is their lighting function and ADR compliance. The 2031 is a supplementary side direction indicator compliant to ADR 6/00 Category 5, activating in sync with the vehicle's indicator circuit during turning and lane changes. The 2033 is a side marker light compliant to ADR 45/01, illuminating as a continuous side position and marker lamp. Both can be installed together as a matched pair for vehicles requiring both side indicator and side marker functions. What does "supplementary side direction indicator" mean? A supplementary side indicator is an additional indicator lamp mounted on the side of the vehicle to make turning and lane-change signals visible to road users positioned alongside and diagonally behind the vehicle, where the primary front and rear indicator lamps may not be clearly visible. On long-wheelbase trucks and semi-trailers, road users travelling adjacent to the vehicle — particularly cyclists, motorcyclists, and drivers in the blind spot zone — benefit significantly from a side-mounted indicator that activates in sync with the main indicators. What does ADR 6/00 Category 5 compliance mean for side indicator lights? ADR 6/00 is the Australian Design Rule governing direction indicator lamps on vehicles. Category 5 covers supplementary side direction indicators fitted to heavy vehicles. Compliance confirms the 2031 meets the legal requirements for side indicator lamp applications on trucks and trailers operating on Australian public roads, including prescribed flash rate, light output, colour, and visibility angles. Supplementary side indicators may be legally required on certain heavy vehicle types and configurations under applicable state and territory regulations. What does UWVO Ultra Wide Visibility Optics mean in practice? UWVO (Ultra Wide Visibility Optics) extends the horizontal visibility angle of the side indicator beyond the standard forward-facing cone of conventional side lamps. In practice, drivers in adjacent lanes, cyclists, and road users approaching from oblique angles alongside the vehicle can see the indicator activating across a significantly wider horizontal arc than a standard side indicator lamp. This is especially important on long semi-trailers and B-trains where the vehicle length creates extended blind zones alongside the vehicle during lane changes and turning manoeuvres. Can the 2031 be used on both 12V and 24V trailer systems? Yes. The 2031 operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single unit covers both voltage levels without modification, making it suitable for workshop and fleet environments managing mixed 12V and 24V trailer fleets.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

HELLA 2309 Rear Marker Light Red LED 9 to 33V Red LED rear position and marker light delivering efficient 3.2W illumination across a wide 9–33V input range, pre-wired with 2.5m cable and backed by HELLA's 5-year warranty, purpose-built for trucks, trailers, and heavy commercial vehicles requiring reliable rear marker lighting. Product Overview The HELLA 2309 is a red LED rear position and marker light designed for trucks, trailers, semi-trailers, and heavy commercial vehicles requiring dependable rear marker illumination. Producing red rear marker and position light output from a 140 x 65mm body, the 2309 delivers efficient LED performance at 3.2W across both 12V and 24V DC systems, providing a significantly lower electrical draw than incandescent rear marker alternatives while offering the extended operational lifespan and maintenance-free operation inherent to LED technology. The 2309 is pre-wired with a generous 2.5m cable, providing ample routing length for trailer rear frame and body panel installations where the wiring connection point may be located some distance from the lamp mounting position. This makes the 2309 well suited to longer trailer bodies, rear-access refrigerated units, and rear door frame installations where shorter cable lengths require additional extension wiring. HELLA's five-year warranty reflects the build quality and expected service life of this rear marker light, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies managing ongoing trailer lighting maintenance and refurbishment programs. Universal 9–33V input covers the full range of 12V and 24V heavy vehicle electrical systems in a single unit, simplifying procurement for mixed fleet and workshop environments. As a companion to the HELLA 2033 red/amber side marker and 2307BULK rear marker bulk pack, the 2309 completes the HELLA rear and side marker light range with a larger-format individual rear marker unit for applications where a more prominent rear marker presence is required. Features & Benefits Red LED Rear Position and Marker Output: Delivers bright red rear marker and position lamp illumination with maintenance-free LED technology, providing a significantly longer operational lifespan than incandescent rear marker alternatives and reducing fleet downtime and replacement costs. 3.2W Efficient LED Operation: At just 3.2W power consumption at both 12V and 24V DC, the 2309 draws substantially less current than equivalent incandescent rear marker lamps, reducing electrical load on trailer circuits and minimising heat generation at the lamp mounting point. Pre-Wired 2.5m Cable: Generous 2.5m factory-fitted cable provides ample length for routing through trailer rear frames and body structures to the wiring circuit connection point, accommodating longer trailer bodies, rear door frame installations, and refrigerated unit rear panel fitments without requiring extension wiring. 140 x 65mm Body Profile: Larger 140 x 65mm form factor provides a more prominent rear marker presence than compact 60 x 38mm marker units, improving rear conspicuity on trucks and trailers where a larger rear lighting signature is preferred or specified. 9–33V Universal Input: Compatible with both 12V light commercial vehicles and 24V heavy trucks and trailers in a single unit, eliminating the need for separate voltage variants across mixed fleets. LED Technology for Extended Service Life: Solid-state LED construction eliminates bulb replacements, reduces maintenance frequency, and provides consistent light output over the operational life of the lamp compared to incandescent alternatives subject to vibration-related filament failures in heavy transport environments. HELLA 5-Year Warranty: Backed by HELLA's five-year warranty, providing long-term confidence for fleet operators, trailer manufacturers, and transport companies specifying quality lighting for extended service life. Technical Specs Specification Detail Part Number 2309 Voltage Input 9–33V Light Type LED Light Function Rear Position / Marker Light Power Consumption 3.2W at 12 or 24V DC Colour Red Connector Pre-Wired Cable Length 2.5m Dimensions (L×W) 140 × 65mm Warranty Five Years Compatible With / Goes Well With The HELLA 2309 is suited to any 12V or 24V truck, trailer, or heavy commercial vehicle requiring red LED rear position and marker lighting with a larger format presence. Primary applications include semi-trailers and B-trains requiring rear marker compliance, curtainsider and tautliner trailers, flatbed and drop-deck trailers, refrigerated and box body trailers with longer rear cable routing requirements, tipper bodies and tipping trailers, rigid trucks and bus bodies, car carriers, livestock trailers, and heavy plant transport trailers requiring rear position lamp fitment. Pairs well with the HELLA 2033 red/amber side marker light for a matched larger-format side and rear marker lighting installation, the HELLA 2307BULK red rear marker bulk pack for volume procurement of compact rear marker units, HELLA combination lamps including the 2430, 2431, and DuraLED COMBI-SR series, HELLA front and cab marker light packs including the 2051BULK, 2054BULK, and 2026BULK, trailer wiring looms and junction boxes, and waterproof cable connectors and heat-shrink terminals for professional rear panel wiring installations. Frequently Asked Questions How does the HELLA 2309 differ from the HELLA 2307BULK rear marker pack? Both products deliver red LED rear marker and position light output on 9–33V systems with 2.5m cables and HELLA's five-year warranty. The 2309 is a larger individual unit at 140 x 65mm providing a more prominent rear marker presence, while the 2307BULK supplies smaller 60 x 38mm units in a bulk pack format. Choose the 2309 where a larger rear marker footprint and greater individual lamp presence is preferred, and the 2307BULK where compact unit volume procurement is the priority. What is the difference between a rear position light and a rear marker light? A rear position light indicates the presence and width of the rear of the vehicle to following traffic and is typically wired to illuminate with the vehicle's running lights. A rear marker light serves a similar conspicuity function, particularly on wide or long heavy vehicles where additional rear lighting is required to indicate the vehicle's overall dimensions to following drivers. On heavy trucks and trailers, the terms are often used interchangeably as the function and application overlap significantly in heavy vehicle lighting configurations. Is the 2309 suitable for both 12V and 24V trailer systems? Yes. The 2309 operates across a 9–33V input range, making it fully compatible with both 12V light commercial vehicle electrical systems and standard 24V heavy truck and trailer systems. A single unit covers both voltage levels without modification, making it suitable for workshop and fleet environments managing mixed 12V and 24V trailer fleets. Why does the 2309 have a 2.5m cable rather than a shorter length? The 2.5m cable length accommodates the routing distance commonly required on trailer rear panels, longer trailer bodies, and refrigerated units where the wiring harness connection point may be located some distance from the rear marker lamp mounting position. A longer cable eliminates the need for extension wiring in most trailer rear panel installations, simplifying the installation process and reducing the number of wiring joints in the circuit. Can the 2309 be paired with the HELLA 2033 side marker for a matched installation? Yes. The 2309 and the HELLA 2033 side marker share the same 140 x 65mm body dimensions, making them a natural matched pair for vehicles requiring both rear marker and side marker lighting in a consistent larger-format lamp profile. The 2033 is available in red and amber for side marking, and the 2309 covers the red rear marker function, providing a visually consistent lamp suite along the side and rear of the vehicle.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 72175 12/24V 7IN EX2 Blackout Driving Light (Pair) Premium 7-inch EX2 blackout driving lights supplied as a pair, featuring a smoked lens for a stealthy blacked-out appearance, hybrid beam pattern for combined width and distance performance, dual amber/white ADR-approved position lights, and 1 lux at 460m throw, backed by Narva's 7-year warranty for 12/24V 4WD, touring, and off-road applications. Product Overview The Narva 72175 EX2 Blackout is a 7-inch driving light designed for 4WD, touring, and off-road enthusiasts who demand high-performance auxiliary lighting without compromising the aggressive blacked-out aesthetic of a dark-built vehicle. The smoked lens protector gives the EX2 Blackout its signature dark, stealthy appearance when unlit — eliminating the traditional bright chrome or clear lens look of conventional driving lights and integrating seamlessly with modern matte black bull bars, dark grilles, and blacked-out vehicle builds. When activated, the EX2 Blackout's hybrid beam pattern delivers a combination of width and distance performance in a single beam, providing broad coverage of the road edges and surrounding terrain while simultaneously throwing light to 1 lux at an impressive 460 metres — eliminating the traditional compromise between dedicated spot and flood beam configurations. Dual-colour position lights add a premium DRL (daytime running light) function, with the white mode ADR approved for Australian road use and the amber mode offering a distinctive secondary appearance option. The 5700K colour temperature produces crisp, near-daylight white light output for maximum visibility and reduced eye fatigue during extended night driving. With a peak current draw of 5.8A at 12V and Multivolt 12/24V compatibility, the EX2 Blackout suits both 12V 4WD and 24V commercial vehicle electrical systems. The wide -40°C to +60°C operating temperature range covers both extreme cold alpine conditions and high-heat outback environments. Supplied as a pair with Narva's 7-year warranty, the 72175 is a premium long-term auxiliary lighting investment for serious off-road and touring builds. Features & Benefits Smoked Blackout Lens: The smoked lens protector delivers a blacked-out appearance when the light is unlit, integrating seamlessly with dark-built 4WD vehicles, matte black bull bars, and aggressive off-road builds where the traditional clear or chrome driving light look is undesirable. Hybrid Beam Pattern: The EX2 Blackout's hybrid beam combines the width of a flood beam with the distance of a spot beam in a single unit, providing broad illumination of road edges and terrain alongside long-throw performance to 1 lux at 460 metres — eliminating the need to choose between dedicated spot or flood configurations. 1 Lux at 460 Metres: The long-throw performance of 1 lux at 460 metres provides significant advance warning of obstacles, animals, and road hazards at distance, giving drivers on outback tracks, rural highways, and high-speed off-road terrain the reaction time needed to respond safely. Dual Amber/White Position Lights: Integrated dual-colour position lights provide both a white ADR-approved daytime running light function and an amber secondary mode, adding a premium DRL appearance to the vehicle when the main driving beam is not required. ADR Approved Position Light (White): The white position light mode carries ADR approval for use on Australian roads, confirming compliance for daytime running light applications without requiring additional lighting modifications. 5700K Colour Temperature: Near-daylight 5700K output delivers crisp, high-contrast white light that maximises road visibility, improves depth perception at distance, and reduces driver eye fatigue during extended night driving compared to lower colour temperature alternatives. Multivolt 12/24V Compatibility: A single unit operates across both 12V and 24V electrical systems, covering standard 4WD and passenger vehicle applications as well as 24V commercial and expedition vehicle builds without requiring separate model variants. Wide Operating Temperature Range (-40°C to +60°C): Suitable for high-alpine winter conditions and extreme outback summer heat, ensuring consistent performance across the full range of Australian driving environments and seasonal conditions. Supplied as a Pair: Both lights included in a single purchase, providing a matched pair for balanced left and right auxiliary lighting installation without requiring separate unit purchases. 7-Year Warranty: Backed by Narva's 7-year warranty, providing the highest level of long-term product confidence for a premium auxiliary driving light investment. Technical Specs Specification Detail Part Number 72175 Pack Contents Pair (2 lights) Size 7 inch (EX2) Voltage 12/24V Multivolt Colour Temperature 5700K Beam Pattern Hybrid (Width and Distance) Throw Distance 1 lux at 460m Peak Current (12V) 5.8A Position Light Dual Amber / White (ADR White) Lens Smoked Blackout Operating Temp -40°C to +60°C Warranty 7 Years Compatible With / Goes Well With The Narva 72175 EX2 Blackout is suited to any 12V or 24V 4WD, SUV, ute, or commercial vehicle requiring premium blacked-out auxiliary driving lights for off-road, touring, and rural highway applications. Particularly well suited to dark-built vehicles with matte black or satin bull bars, aggressive off-road builds, and vehicles where a stealthy blacked-out front lighting aesthetic is a priority alongside genuine high-output driving performance. Pairs well with Narva light bars and additional auxiliary lighting for a complete Narva lighting suite, bull bar and A-pillar mounting brackets suited to the 7-inch EX2 form factor, Narva wiring harness kits with relay and switch for a clean installation, in-cabin rocker switches and LED switch panels, and tow bar and rear auxiliary lighting for matched rear visibility. Frequently Asked Questions What makes the EX2 Blackout different from standard driving lights? The EX2 Blackout combines three premium features not typically found together in a standard driving light: the smoked blackout lens for a stealthy unlit appearance, the hybrid beam pattern eliminating the spot versus flood compromise, and integrated dual amber/white position lights for a DRL function. Together these make the 72175 a purpose-built premium option for vehicle builds where appearance and performance are equally important, rather than a basic auxiliary light focused solely on output. What does "hybrid beam pattern" mean and why is it better than a single spot or flood beam? A traditional spot beam throws light to maximum distance in a narrow column, while a flood beam spreads light wide but sacrifices throw distance. The EX2 Blackout's hybrid beam combines both characteristics in a single optical design, spreading light across the road edges and surrounding terrain while simultaneously projecting to 1 lux at 460 metres. This eliminates the common trade-off of choosing between width and distance, making the hybrid beam particularly effective for high-speed outback driving, bush tracks, and rural highway use where both road edge and long-distance visibility are needed simultaneously. Are the dual position lights legal for road use in Australia? The white position light mode on the EX2 Blackout carries ADR approval for use on Australian roads as a daytime running light function. The amber position light mode does not carry ADR approval for road use and should be used off-road or in situations where ADR compliance is not required. Always confirm applicable state and territory vehicle lighting regulations for the specific vehicle type and intended use before activating any auxiliary lighting mode on public roads. What does 1 lux at 460 metres mean for night driving? The 1 lux benchmark is the standard measurement used to compare driving light throw distance, representing the distance at which the light produces a minimum illumination level of 1 lux. At 460 metres, the EX2 Blackout illuminates the road ahead at a level sufficient for a driver travelling at 100km/h to identify and react to hazards, animals, and obstacles at highway speeds with meaningful advance warning distance. This is a strong throw performance figure for a 7-inch format driving light. Is the 72175 suitable for 24V commercial vehicles and expedition builds? Yes. The EX2 Blackout operates on both 12V and 24V DC electrical systems through its Multivolt compatibility, making it suitable for standard 12V 4WD and passenger vehicles as well as 24V commercial vehicles, expedition trucks, and overlanding builds running 24V electrical systems. The 5.8A peak current draw is specified at 12V; at 24V the current draw will be proportionally lower for the same wattage output.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 84200 Reflector Triangle Red 440mm - 3 Pc AS3790 compliant red reflector warning triangle set of 3, featuring high-reflective capability for night visibility, fluorescent inner triangle for daytime warning, non-skid rubber feet for stability in wind and passing traffic, and permanently printed placement instructions — a complete roadside breakdown and emergency safety solution for trucks, caravans, touring vehicles, and commercial fleets. Product Overview The Narva 84200 is a professional-grade set of three red reflector warning triangles delivering AS3790 compliant roadside warning capability for breakdown, accident, and emergency stopping situations across trucks, caravans, motorhomes, touring vehicles, and commercial fleets. Supplied as a set of three in a carry case, the 84200 provides the correct number of triangles for a standard forward and rear warning deployment around a stationary vehicle on a public road. Each 440mm triangle features a highly reflective outer surface for maximum night-time visibility to approaching traffic, combined with a fluorescent inner triangle that provides high-visibility daytime warning without requiring any reflective illumination — ensuring the triangles remain conspicuous to traffic in both day and night conditions. The non-skid rubber feet on each triangle are a practical field feature, keeping the units stable and in position on road surfaces in high-wind conditions and when subjected to the buffeting and air displacement of passing vehicles and heavy trucks at speed. No tools are required to set up each triangle, enabling rapid deployment from the vehicle in an emergency without fumbling with tools or hardware. Placement instructions are permanently printed on the carry case rather than supplied as a separate sheet that can be lost over time, ensuring the deployment guidance remains accessible for the life of the product. Weighing 6.4kg for the set, the 84200 is a substantial, professional-grade product rather than a lightweight budget alternative. AS3790 compliance confirms the triangles meet the Australian Standard for warning devices for broken-down vehicles, relevant for commercial transport operators who are legally required to carry compliant warning devices under heavy vehicle regulations in Australia. Features & Benefits AS3790 Compliant: Meets Australian Standard AS3790 for warning devices for broken-down vehicles, confirming the 84200 is compliant for use as a roadside warning device on Australian roads. AS3790 compliance is a legal requirement for warning triangles carried on heavy commercial vehicles under applicable Australian heavy vehicle regulations. Set of 3 Triangles: Supplied as a set of three triangles in a carry case, providing the standard deployment configuration for forward and rear placement around a stationary vehicle — one behind the vehicle, one ahead of the vehicle, and one at the vehicle to mark the hazard zone. High Reflective Capability for Night Use: Each triangle features a high-reflectivity outer surface that reflects oncoming headlights back towards approaching drivers, providing strong night-time visibility of the roadside warning zone at distance. Fluorescent Inner Triangle for Daytime Warning: The fluorescent inner triangle produces high-visibility daytime warning conspicuity without relying on reflected light, ensuring the triangles remain highly visible to approaching traffic in daylight conditions when reflective surfaces are less effective. Non-Skid Rubber Feet: Rubber feet on each triangle base prevent the units from sliding or tipping on road surfaces in high-wind conditions and when subjected to the air displacement and buffeting of passing vehicles and heavy trucks, reducing the risk of triangles being displaced from their deployment positions. No Tools Required: Each triangle can be set up and deployed without tools, enabling rapid roadside setup in an emergency situation without requiring additional equipment from the vehicle. Placement Instructions on Case: Deployment placement instructions are permanently printed on the carry case, ensuring guidance on correct triangle positioning remains accessible throughout the life of the product without relying on a separate instruction sheet that can be lost. Carry Case Included: The set is supplied in a carry case for organised storage and transport in the vehicle, keeping all three triangles together and protected during storage. Technical Specs Specification Detail Part Number 84200 Pack Contents 3 triangles and carry case Size 440mm Shape Triangle Colour Red Outer Surface High Reflectivity Inner Triangle Fluorescent Feet Non-Skid Rubber Compliance AS3790 OEM Number M40972 Weight 6.4kg (set) Warranty One Year Compatible With / Goes Well With The Narva 84200 is suited to any vehicle, trailer, or commercial fleet requiring AS3790 compliant roadside warning triangles for breakdown and emergency stopping situations. Primary applications include heavy trucks and semi-trailers required to carry compliant warning devices under Australian heavy vehicle regulations, caravans and motorhomes for outback and rural touring, commercial fleets and company vehicles, emergency roadside kits for 4WD and overlanding vehicles, bus and coach operators, and any driver or operator seeking a professional-grade roadside warning solution for day and night use. Pairs well with Narva and OEX emergency vehicle lighting for a comprehensive roadside safety kit, first aid kits and roadside emergency equipment, fire extinguishers and safety gear for touring and commercial vehicle emergency preparedness, high-visibility safety vests and road safety equipment, and tow ropes and roadside recovery equipment for complete vehicle emergency kits. Frequently Asked Questions Are these warning triangles legally required to be carried on commercial vehicles in Australia? Yes. Under Australian heavy vehicle regulations, certain classes of heavy commercial vehicles are legally required to carry compliant warning devices including reflector triangles. AS3790 compliance on the Narva 84200 confirms the triangles meet the prescribed Australian Standard for breakdown warning devices. The specific vehicle classes and regulations vary by state and territory — consult the applicable National Heavy Vehicle Regulator (NHVR) guidelines or your state transport authority for the specific requirements applicable to your vehicle type and operating jurisdiction. How should the three triangles be deployed around a broken-down vehicle? Standard deployment practice positions one triangle immediately behind the vehicle to warn following traffic of the immediate hazard, one triangle approximately 30–50 metres behind the vehicle to give following traffic early warning at distance, and one triangle ahead of the vehicle or in front of the hazard zone where practical. The exact recommended deployment distances and positions are permanently printed on the carry case. Always deploy triangles as quickly as safely possible after stopping, and remain aware of approaching traffic at all times during deployment. What is the difference between the reflective outer surface and the fluorescent inner triangle? The reflective outer surface uses retroreflective material that reflects headlights and light sources back towards the approaching driver, providing strong night-time visibility when vehicle headlights illuminate the triangle surface. The fluorescent inner triangle uses a fluorescent orange or yellow material that absorbs and re-emits light energy at a higher visible wavelength, producing a bright, high-visibility appearance in daylight conditions independently of reflected light sources. Together, both surfaces ensure the triangles remain conspicuous to approaching traffic in both day and night conditions without requiring any battery or power source. Why do the triangles have non-skid rubber feet? The rubber feet prevent the triangles from sliding or tipping on smooth road surfaces in the turbulent air conditions experienced on busy roads. When heavy trucks and vehicles pass a stationary triangle at speed, the air displacement creates significant buffeting forces that can displace lightweight or smooth-based triangles from their deployment position, reducing their effectiveness as a warning marker. The non-skid rubber feet provide sufficient friction to keep the triangles stable under these conditions, maintaining their intended warning position throughout the hazard period. Can the Narva 84200 triangles be used in outback and remote touring conditions? Yes. The 84200 triangles are well suited to outback and remote touring use where roadside breakdowns may occur on unsealed roads, remote highways, and tracks with limited passing traffic and poor visibility conditions. The combination of high-reflective night visibility, fluorescent daytime conspicuity, and no-tools-required setup makes the 84200 a practical emergency safety tool for remote touring. Storing the carry case in an accessible location in the vehicle — rather than buried under camping gear — ensures rapid deployment when needed.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 87540-12 LED Strip Light High Output Rigid 12V 114mm Compact high-output rigid LED strip light delivering efficient illumination in a 114 x 30 x 12mm IP66 sealed body, drawing just 0.09A at 12V, backed by Narva's 5-year warranty for utility, inspection, interior, and auxiliary lighting applications. Product Overview The Narva 87540-12 is a compact rigid LED strip light designed for utility, inspection, interior, and auxiliary lighting applications where a low-profile, high-output LED strip is required in a confined or space-restricted mounting environment. At just 114 x 30 x 12mm, the 87540-12 is one of the smallest rigid LED strip formats in the Narva range, making it well suited to underbonnet illumination, tool box and storage compartment lighting, step lighting, engine bay inspection, caravan and camper trailer interior lighting, marine courtesy lighting, and any application where a compact but effective light source is needed in a tight space. The rigid PCB construction provides a stable, non-flexible mounting platform that maintains a consistent optical alignment and can be directly mounted to flat surfaces without the sag or alignment issues associated with flexible LED strips in vibration environments. IP66 ingress protection confirms the 87540-12 is fully dust-tight and resistant to powerful water jets, making it suitable for external utility applications including underbonnet, chassis, and step lighting that are exposed to rain, road spray, and water ingress. At just 0.09A current draw at 12V and 0.05A at 24V, the 87540-12 is an extremely low-draw light source suited to always-on or long-duration interior and utility lighting applications without placing a significant load on the vehicle's electrical system or battery. Weighing just 76 grams, the lightweight construction simplifies installation in overhead, vertical, and inverted mounting positions. Narva's 5-year warranty provides long-term confidence for automotive, marine, and caravan applications. Features & Benefits High-Output Rigid LED Strip: Rigid PCB construction delivers high-output LED illumination in a stable, non-flexible format that maintains consistent optical alignment and mounting position in vibration environments, without the sag or alignment issues of flexible strip alternatives. IP66 Ingress Protection: Fully dust-tight and protected against powerful water jets from any direction, confirming suitability for external utility applications including underbonnet, step, chassis, and exterior courtesy lighting exposed to rain, road spray, and washdown. Ultra-Low Current Draw: Drawing just 0.09A at 12V and 0.05A at 24V, the 87540-12 places minimal electrical load on the vehicle circuit, making it ideal for always-on or long-duration lighting applications without draining the battery or overloading auxiliary circuits. Compact 114 x 30 x 12mm Profile: The slim, compact body suits space-restricted mounting environments including underbonnet cavities, toolbox interiors, storage compartments, step recesses, and caravan or camper trailer interior panels where larger light units cannot be accommodated. Lightweight 76g Construction: The 76g body simplifies installation in overhead, vertical, and inverted mounting positions, reducing the load on mounting adhesive, fasteners, and brackets in applications where weight minimisation is important. Rigid PCB Format: Unlike flexible LED strips, the rigid PCB format provides a structurally stable mounting platform that can be secured directly to flat surfaces with consistent LED orientation, suitable for vibration-exposed underbonnet and chassis mounting positions. Narva 5-Year Warranty: Backed by Narva's 5-year warranty, providing long-term confidence for automotive, marine, caravan, and commercial vehicle utility lighting applications. Technical Specs Specification Detail Part Number 87540-12 Voltage 12V Current Draw (12V) 0.09A Current Draw (24V) 0.05A Light Type LED Format Rigid Strip Ingress Protection IP66 Dimensions (L×W×H) 114 × 30 × 12mm Weight 0.076kg (76g) Warranty 5 Years Compatible With / Goes Well With The Narva 87540-12 is suited to any 12V vehicle, vessel, or caravan requiring compact high-output rigid LED strip lighting in a space-restricted environment. Primary applications include underbonnet and engine bay inspection lighting, toolbox and storage compartment illumination, caravan and camper trailer interior strip lighting, marine cabin and courtesy lighting, step and entry lighting on 4WD and commercial vehicles, chassis and underbody accent lighting, and utility compartment lighting on emergency and service vehicles. Pairs well with additional Narva 87540-12 units for extended strip lighting runs, Narva LED strip light controllers and switches for multi-zone lighting setups, adhesive mounting tape and surface-mount brackets for clean installation, in-line fuse holders and wiring accessories for auxiliary circuit protection, and Narva interior and utility lighting products for a complete matched Narva lighting solution. Frequently Asked Questions What is the difference between a rigid LED strip and a flexible LED strip? A rigid LED strip uses a solid PCB (printed circuit board) substrate that does not bend, providing a stable, structurally fixed mounting platform. A flexible LED strip uses a thin flexible PCB that can be bent around curves and contours. Rigid strips are preferred for flat-surface mounting applications where consistent LED orientation, vibration resistance, and structural stability are priorities, such as underbonnet, toolbox, and step lighting. Flexible strips are preferred where the light needs to conform to curved surfaces or complex shapes. What does IP66 mean for this LED strip? IP66 is the ingress protection rating confirming the 87540-12 is fully dust-tight (first digit 6) and protected against powerful water jets from any direction (second digit 6). This makes the strip suitable for external applications including underbonnet, step, chassis, and exterior utility lighting that are exposed to rain, high-pressure road spray, and washdown. Note that IP66 does not certify submersion resistance — for applications requiring water immersion protection, an IP67 or IP68 rated product would be required. Can the 87540-12 be used on 24V vehicle systems? The current draw specification of 0.05A at 24V confirms the 87540-12 is compatible with 24V electrical systems. However, this is the 12V variant of the strip — confirm with your Narva supplier whether a dedicated 24V rated variant is available and more appropriate for permanent 24V installation, or whether the 12V strip operates within its rated parameters on a 24V system for your specific application. How many units can be connected to a single auxiliary circuit? At 0.09A per strip at 12V, the 87540-12 places an extremely low electrical load per unit. A standard 10A auxiliary circuit can theoretically support over 100 units before reaching circuit capacity, making the current draw of individual strips effectively negligible for most multi-strip lighting installations. Always account for all loads on the circuit and size fusing and wiring appropriately for the total connected load. What mounting methods are recommended for the 87540-12? The rigid PCB format is suitable for direct surface mounting using double-sided adhesive tape for light-duty interior and caravan applications, or small screws and brackets for external, underbonnet, and vibration-exposed installations where adhesive mounting alone may be insufficient over time. For external and underbonnet applications, a mechanical fastener or mounting bracket is recommended to ensure the strip remains securely positioned under vibration, heat cycling, and exposure to water and contaminants.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 87541 Interior Light LED 10 - 30V 178mm Compact cool white LED interior light delivering 19 lux at 2 metres from a slim 178 x 33 x 12mm aluminium housing, with IP66 sealed construction, 0.09A efficient draw at 12V, and 5-year warranty for caravans, camper trailers, trucks, marine vessels, and utility vehicle interior lighting applications on 10–30V systems. Product Overview The Narva 87541 is a rigid LED interior light designed for caravans, camper trailers, motorhomes, trucks, marine vessels, and utility vehicle interior applications requiring a compact, durable, and efficient LED light source. Producing 19 lux at 2 metres in a cool white output, the 87541 delivers a practical, evenly spread interior illumination level suited to reading, task lighting, galley illumination, work vehicle cab lighting, and general interior ambient light across a wide range of 12V and 24V DC applications. The robust aluminium housing provides significantly greater durability and thermal performance than plastic-bodied interior strip lights, protecting the LED PCB from impact damage in the vibration-exposed environments of off-road caravans, camper trailers, and work vehicles. IP66 ingress protection confirms the 87541 is fully dust-tight and resistant to powerful water jets, making it equally at home in external utility applications including underbonnet illumination, toolbox lighting, step lighting, and engine bay inspection where moisture and dust exposure would compromise standard interior lights. Longer than the compact 87540-12 at 178mm, the 87541 provides a wider light spread and greater output suitable for illuminating larger interior panels, overhead cab areas, and full-width caravan or motorhome wall sections. At 0.09A at 12V and 0.05A at 24V, the ultra-low current draw supports always-on or extended-duration lighting without meaningful battery drain, and the 10–30V input range covers the full span of 12V and 24V DC vehicle and vessel electrical systems without requiring separate voltage variants. Narva's 5-year warranty provides long-term confidence for automotive, marine, and caravan installations. Features & Benefits 19 Lux at 2 Metres Output: Delivers a measured 19 lux at 2 metres, providing practical interior illumination for reading, task lighting, galley and kitchen areas, cab lighting, and general ambient interior use across caravans, trucks, and marine cabin applications. Cool White Light Output: Cool white colour temperature produces a crisp, bright light output that maximises perceived brightness and visibility for task-oriented interior lighting in caravans, motorhomes, work vehicle cabs, and utility compartments. Robust Aluminium Housing: The aluminium body provides superior impact resistance, structural rigidity, and thermal performance compared to plastic-bodied interior strip alternatives, protecting the LED PCB in vibration-exposed off-road, truck, and marine environments. IP66 Ingress Protection: Fully dust-tight and protected against powerful water jets from any direction, extending the 87541's suitability beyond interior use to external utility applications including underbonnet, toolbox, step, and exterior courtesy lighting in moisture-exposed environments. Ultra-Low Current Draw: Drawing just 0.09A at 12V and 0.05A at 24V, the 87541 places minimal load on the vehicle or vessel electrical system, making it suitable for always-on or extended-duration lighting applications without significant battery drain. 178 x 33 x 12mm Slim Profile: The slim, low-profile body installs neatly onto interior panels, overhead mounting surfaces, and cabinet undersides without intrusive protrusion, maintaining a clean interior aesthetic in caravans, motorhomes, and marine cabins. 10–30V Universal Input: Compatible with both 12V and 24V DC electrical systems in a single unit, covering passenger vehicles, caravans, motorhomes, trucks, heavy equipment, and marine vessels without requiring separate voltage variants. Rigid Construction: The rigid format maintains consistent LED orientation and mounting alignment on flat surfaces, providing stable, vibration-resistant installation suited to the movement and road vibration experienced by caravans and off-road vehicles. Narva 5-Year Warranty: Backed by Narva's 5-year warranty, providing long-term confidence for automotive, caravan, marine, and utility vehicle interior lighting applications. Technical Specs Specification Detail Part Number 87541 Voltage Input 10–30V Light Type LED Light Style Interior Light Colour Cool White Light Output 19 Lux @ 2m Current Draw (12V) 0.09A Current Draw (24V) 0.05A Housing Material Aluminium Format Rigid Ingress Protection IP66 Dimensions (L×W×H) 178 × 33 × 12mm Weight 0.095kg (95g) Warranty 5 Years Compatible With / Goes Well With The Narva 87541 is suited to any 12V or 24V vehicle, vessel, or caravan requiring compact, efficient LED interior or utility lighting. Primary applications include caravan and motorhome interior panel and overhead lighting, camper trailer and rooftop tent interior lighting, truck and commercial vehicle cab interior lighting, marine cabin and courtesy lighting, toolbox and storage compartment illumination, 4WD and dual-cab ute interior lighting, step and entry lighting, and underbonnet or engine bay inspection lighting. Pairs well with the Narva 87540-12 compact 114mm LED strip light for smaller spaces and accent lighting, additional 87541 units for multi-zone interior lighting setups, Narva interior light switches and dimmers for lighting control, in-line fuse holders and wiring accessories for auxiliary circuit protection, and surface-mount brackets and adhesive mounting tape for flexible installation options. Frequently Asked Questions How does the 87541 compare to the Narva 87540-12 compact strip light? Both lights share the same IP66 rating, aluminium housing, rigid format, current draw specifications, and 5-year warranty. The 87541 is the longer 178mm variant with a confirmed 19 lux at 2m output measurement and a 10–30V input range, while the 87540-12 is the compact 114mm variant at 12V. The 87541 is the better choice for larger interior panels, overhead cab lighting, and full-width caravan wall sections, while the 87540-12 suits smaller spaces and applications where the shorter length is a better fit. What does 19 lux at 2 metres mean in practical terms? Lux is a measurement of illuminance — the amount of light falling on a surface per unit area. 19 lux at 2 metres means the 87541 produces 19 lux of illumination on a surface positioned 2 metres below or away from the light. For reference, a well-lit office environment is typically around 300–500 lux at desk height, while a comfortable reading level is generally around 100–200 lux. At 19 lux the 87541 provides a useful ambient and task light level for interior spaces such as caravan sleeping areas, cab overheads, and storage compartments, and can be supplemented with additional units for higher-output requirements. What does IP66 mean and is the 87541 suitable for wet or outdoor applications? IP66 certifies the 87541 is fully dust-tight and protected against powerful water jets directed from any angle. This makes it suitable for external utility applications including underbonnet lighting, step lighting, and exterior courtesy lighting in rain and road spray environments. Note that IP66 does not certify submersion resistance — for applications requiring water immersion protection such as underwater lighting or fully submerged installations, an IP67 or IP68 rated product is required. Can multiple 87541 units be run from a single switch circuit? Yes. At 0.09A per unit at 12V, multiple 87541 lights can be connected in parallel on a single switch circuit with minimal total current draw. For example, four units draw just 0.36A total at 12V, well within the capacity of a standard automotive switch and light-duty wiring. For larger multi-unit installations, ensure wiring and fusing are appropriately sized for the total connected load and consider a relay for switch circuits controlling more than 10 units. What mounting options are available for the 87541? The rigid aluminium body is suited to direct surface mounting using small self-tapping screws through the housing ends onto interior panels, overhead surfaces, and cabinet undersides. Double-sided adhesive tape can be used for light-duty interior applications where drilling is not preferred. For overhead and inverted mounting in caravans and marine cabins, screw mounting is recommended to ensure the unit remains secure under road vibration and vessel movement. Confirm the mounting surface material and accessibility before selecting the installation method.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 87542 Interior Light LED 10 - 30V 306mm High-output cool white LED interior light delivering 38 lux at 2 metres from a slim 306 x 33 x 12mm rigid body, with IP66 sealed construction, 10–30V universal input, and 5-year warranty — the longest and highest-output unit in the Narva rigid interior light series, purpose-built for caravans, motorhomes, trucks, marine vessels, and utility vehicle interior lighting applications requiring maximum coverage from a single strip. Product Overview The Narva 87542 is the largest and highest-output unit in the Narva rigid LED interior light series, stepping up from the 178mm 87541 to a 306mm body that delivers double the light output at 38 lux at 2 metres. This makes the 87542 the preferred choice for wide interior spaces where a single strip needs to cover the full width of a caravan dinette, motorhome galley, truck sleeper cab overhead, or marine cabin without requiring multiple shorter units. Producing 38 lux at 2 metres in cool white from a body just 12mm deep, the 87542 delivers a bright, practical interior light level suited to reading, meal preparation, work tasks, and general interior ambient lighting across the widest range of 12V and 24V off-road, touring, and commercial vehicle applications. The rigid aluminium housing provides superior impact resistance and thermal performance compared to plastic-bodied alternatives, maintaining structural integrity and consistent optical alignment in the vibration-exposed environments of off-road caravans, camper trailers, and work vehicles. IP66 ingress protection extends suitability beyond pure interior use to external utility applications including underbonnet lighting, toolbox illumination, and step lighting in moisture-exposed environments. At 0.33A at 12V and 0.17A at 24V, the 87542 draws more current than the shorter 87540-12 and 87541 units in proportion to its greater output, but remains a low-draw light source compared to incandescent interior lighting alternatives. The 10–30V input covers the full span of 12V and 24V DC electrical systems, and Narva's 5-year warranty provides long-term confidence for automotive, marine, and caravan installations. Features & Benefits 38 Lux at 2 Metres Output: Delivers a measured 38 lux at 2 metres, double the output of the 178mm 87541, providing a bright and practical interior illumination level for reading, meal preparation, work tasks, and general ambient lighting across wide interior spaces in caravans, motorhomes, and truck cabs. 306mm Wide Coverage: The extended 306mm body provides wide-area light spread from a single unit, covering full-width caravan dinette tables, motorhome galley benches, truck sleeper cab overheads, and marine cabin ceilings without requiring multiple shorter strips side by side. Cool White Light Output: Cool white colour temperature produces a crisp, bright light output that maximises perceived brightness and clarity for task-oriented interior lighting across caravans, motorhomes, work vehicle cabs, and marine cabin applications. Rigid Aluminium Housing: The aluminium body provides superior impact resistance, structural rigidity, and thermal performance compared to plastic-bodied interior strip alternatives, maintaining performance and alignment in vibration-exposed off-road, truck, and marine environments. IP66 Ingress Protection: Fully dust-tight and protected against powerful water jets from any direction, extending the 87542's suitability beyond pure interior use to external utility applications including underbonnet, toolbox, step, and exterior courtesy lighting in moisture-exposed environments. 306 x 33 x 12mm Slim Profile: Despite the extended 306mm length, the body remains just 12mm deep, installing neatly onto interior panels, overhead mounting surfaces, and cabinet undersides without intrusive protrusion. 10–30V Universal Input: Compatible with both 12V and 24V DC electrical systems in a single unit, covering passenger vehicles, caravans, motorhomes, trucks, heavy equipment, and marine vessels without requiring separate voltage variants. Rigid Construction: The rigid format maintains consistent LED orientation and mounting alignment on flat surfaces, providing stable, vibration-resistant installation suited to the movement and road vibration experienced by caravans and off-road vehicles. Narva 5-Year Warranty: Backed by Narva's 5-year warranty, providing long-term confidence for automotive, caravan, marine, and utility vehicle interior lighting applications. Technical Specs Specification Detail Part Number 87542 Voltage Input 10–30V Light Type LED Light Style Interior Light Colour Cool White Light Output 38 Lux @ 2m Current Draw (12V) 0.33A Current Draw (24V) 0.17A Format Rigid Ingress Protection IP66 Dimensions (L×W×H) 306 × 33 × 12mm Weight 0.14kg (140g) Warranty 5 Years Compatible With / Goes Well With The Narva 87542 is suited to any 12V or 24V vehicle, vessel, or caravan requiring high-output wide-coverage LED interior or utility lighting. Primary applications include caravan and motorhome full-width overhead and panel lighting, camper trailer and rooftop tent interior lighting requiring maximum single-strip output, truck and commercial vehicle sleeper cab overhead lighting, marine cabin and saloon lighting, wide toolbox and equipment compartment illumination, 4WD and dual-cab ute canopy interior lighting, and underbonnet or engine bay inspection lighting requiring greater coverage area. Pairs well with the Narva 87541 178mm interior light for multi-zone installations combining full-width and supplementary accent lighting, the Narva 87540-12 114mm strip for smaller accent or spot zones, Narva interior light switches and dimmers for lighting control, in-line fuse holders and wiring accessories for auxiliary circuit protection, and surface-mount brackets and adhesive mounting tape for flexible installation options. Frequently Asked Questions How does the 87542 compare to the Narva 87541 178mm interior light? Both lights share the same IP66 rating, cool white output, rigid format, 10–30V input, and 5-year warranty. The 87542 is the longer 306mm variant delivering 38 lux at 2m and drawing 0.33A at 12V, while the 87541 is the 178mm variant delivering 19 lux at 2m and drawing 0.09A at 12V. The 87542 provides double the light output and wider area coverage from a single unit, making it the preferred choice for wide interior spaces and full-width overhead lighting. The 87541 suits narrower panels and applications where the lower current draw of the shorter unit is preferable. What does 38 lux at 2 metres mean in practical terms? Lux is a measurement of illuminance — the amount of light falling on a surface per unit area. 38 lux at 2 metres means the 87542 produces 38 lux of illumination on a surface 2 metres from the light. This is a comfortable interior ambient and task lighting level for caravan and motorhome interiors, marine cabins, and truck cabs — bright enough for reading, meal preparation, and general tasks while remaining a pleasant, non-harsh interior atmosphere. For higher output requirements, multiple units can be used in parallel to increase total lux output across larger spaces. What does IP66 mean and is the 87542 suitable for wet or outdoor applications? IP66 certifies the 87542 is fully dust-tight and protected against powerful water jets directed from any angle. This makes it suitable for external utility applications including underbonnet lighting, step lighting, and exterior courtesy lighting in rain and road spray environments. Note that IP66 does not certify submersion resistance — for applications requiring water immersion protection, an IP67 or IP68 rated product would be required. Can multiple 87542 units be run from a single switch circuit? Yes. At 0.33A per unit at 12V, multiple 87542 lights can be connected in parallel on a single switch circuit. For example, three units draw just under 1A total at 12V, remaining well within the capacity of a standard automotive switch and light-duty wiring. For larger multi-unit installations, ensure wiring and fusing are appropriately sized for the total connected load and consider a relay for switch circuits controlling more than five to six units simultaneously. What mounting options are available for the 87542? The rigid aluminium body is suited to direct surface mounting using small self-tapping screws through the housing ends onto interior panels, overhead surfaces, and cabinet undersides. Double-sided adhesive tape can be used for light-duty interior applications where drilling is not preferred. For overhead and inverted mounting in caravans and marine cabins, screw mounting is recommended to ensure the unit remains secure under road vibration and vessel movement. The 306mm length provides multiple screw fixing points for a stable, distributed mounting arrangement.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Narva 87543 Interior Light LED 10 - 30V 500mm Maximum-output cool white LED interior light delivering 66 lux at 2 metres from a slim 500 x 33 x 12mm rigid body, with IP66 sealed construction, 10–30V universal input, and 5-year warranty — the flagship unit in the Narva rigid interior light series, purpose-built for caravans, motorhomes, trucks, marine vessels, and utility vehicle interior lighting applications demanding maximum single-strip coverage and output. Product Overview The Narva 87543 is the flagship unit in the Narva rigid LED interior light series, delivering 66 lux at 2 metres from a 500mm body — more than triple the output of the 178mm 87541 and nearly double that of the 306mm 87542. Designed for the largest and most demanding interior lighting applications in the series, the 87543 is the preferred choice when a single strip needs to deliver maximum illumination across a full-length caravan living area, motorhome kitchen bench, truck sleeper cab ceiling, or wide marine saloon without requiring multiple shorter units side by side. At 500mm in length and just 12mm deep, the 87543 spans the majority of standard caravan and motorhome interior widths in a single unit, providing even end-to-end cool white illumination across the full installation space. The 66 lux at 2 metres output places the 87543 firmly in task and ambient lighting territory, delivering a bright interior environment suitable for reading, meal preparation, and detailed work tasks rather than simply providing a low-level presence light. Drawing 0.6A at 12V and 0.3A at 24V, the 87543 remains a low-draw solution relative to its output level compared to equivalent incandescent interior lighting, and the 10–30V input covers both 12V and 24V electrical systems in a single unit. IP66 ingress protection extends suitability to external utility applications beyond interior use, and Narva's 5-year warranty provides long-term confidence for automotive, marine, and caravan installations. Features & Benefits 66 Lux at 2 Metres Output: The highest light output in the Narva rigid interior light series, delivering 66 lux at 2 metres for bright, task-capable interior illumination across wide living areas, galley benches, sleeper cab ceilings, and full-length marine saloon interiors. 500mm Maximum Coverage Width: The extended 500mm body provides the widest light spread in the Narva rigid interior light series from a single unit, covering full-length caravan living areas, motorhome galley counters, truck sleeper cab overhead panels, and wide marine cabin ceilings without requiring multiple shorter strips. Cool White Light Output: Cool white colour temperature delivers a crisp, bright light output that maximises perceived brightness and clarity for task-oriented interior lighting across caravans, motorhomes, work vehicle cabs, and marine cabin applications. IP66 Ingress Protection: Fully dust-tight and protected against powerful water jets from any direction, extending the 87543's suitability beyond interior use to external utility applications including underbonnet, toolbox, step, and exterior courtesy lighting in moisture-exposed environments. 500 x 33 x 12mm Slim Profile: Despite the extended 500mm length, the body remains just 12mm deep, installing neatly on interior panels, overhead mounting surfaces, and cabinet undersides without intrusive protrusion, maintaining a clean interior aesthetic. 10–30V Universal Input: Compatible with both 12V and 24V DC electrical systems in a single unit, covering passenger vehicles, caravans, motorhomes, trucks, heavy equipment, and marine vessels without requiring separate voltage variants. Rigid Construction: The rigid format maintains consistent LED orientation and mounting alignment on flat surfaces, providing stable, vibration-resistant installation suited to the movement and road vibration experienced by caravans and off-road vehicles. Narva 5-Year Warranty: Backed by Narva's 5-year warranty, providing long-term confidence for automotive, caravan, marine, and utility vehicle interior lighting applications. Technical Specs Specification Detail Part Number 87543 Voltage Input 10–30V Light Type LED Light Style Interior Light Colour Cool White Light Output 66 Lux @ 2m Current Draw (12V) 0.6A Current Draw (24V) 0.3A Format Rigid Ingress Protection IP66 Dimensions (L×W×H) 500 × 33 × 12mm Weight 0.215kg (215g) Warranty 5 Years Compatible With / Goes Well With The Narva 87543 is suited to any 12V or 24V vehicle, vessel, or caravan requiring maximum-output wide-coverage LED interior or utility lighting from a single strip unit. Primary applications include caravan and motorhome full-length living area and galley overhead lighting, camper trailer and expedition vehicle interior lighting requiring maximum single-strip output, truck and commercial vehicle sleeper cab ceiling lighting, wide marine saloon and cabin lighting, large toolbox and equipment compartment illumination, 4WD canopy and trade vehicle storage area lighting, and underbonnet or engine bay inspection lighting requiring the widest area coverage available in the series. Pairs well with the Narva 87542 306mm interior light for supplementary zone lighting alongside the 87543 in larger spaces, the Narva 87541 178mm light for accent, reading, or bedhead zones, the Narva 87540-12 114mm compact strip for spot and accent applications, Narva interior light switches and dimmers for multi-zone lighting control, and in-line fuse holders and wiring accessories for auxiliary circuit protection. Frequently Asked Questions How does the 87543 compare to the other Narva rigid interior lights in the series? The Narva rigid interior light series comprises four units scaling in length and output: the 87540-12 at 114mm, the 87541 at 178mm with 19 lux at 2m, the 87542 at 306mm with 38 lux at 2m, and the 87543 at 500mm with 66 lux at 2m. The 87543 delivers the highest output and widest coverage of the series from a single unit, making it the preferred choice for large interior spaces requiring maximum single-strip illumination. All four units share the same IP66 rating, 33 x 12mm cross-section, and 5-year warranty. What does 66 lux at 2 metres mean in practical terms? Lux measures the amount of light falling on a surface per unit area. 66 lux at 2 metres is a comfortable and practical interior task lighting level — bright enough for reading, meal preparation, detailed work tasks, and general interior use across caravans, motorhomes, and truck cabs. For comparison, the 87541 delivers 19 lux and the 87542 delivers 38 lux at the same distance, making the 87543 the significantly brighter option for applications where maximum output is a priority. Multiple 87543 units in parallel can further increase total lux output in very large interior spaces. What does IP66 mean and is the 87543 suitable for wet or outdoor applications? IP66 certifies the 87543 is fully dust-tight and protected against powerful water jets directed from any angle, making it suitable for external utility applications including underbonnet lighting, step lighting, and exterior courtesy lighting in rain and road spray environments. Note that IP66 does not certify submersion resistance — for applications requiring water immersion protection, an IP67 or IP68 rated product would be required. Can multiple 87543 units be run from a single switch circuit? Yes. At 0.6A per unit at 12V, multiple 87543 lights can be connected in parallel on a single switch circuit. Two units draw 1.2A total at 12V, remaining comfortably within the capacity of a standard automotive switch and light-duty wiring. For installations of three or more units, a relay is recommended to protect the switch from sustained current load, and wiring should be appropriately sized and fused for the total connected current draw. What mounting options are available for the 87543? The rigid body is suited to direct surface mounting using small self-tapping screws through the housing ends and mid-span onto interior panels, overhead surfaces, and cabinet undersides. Double-sided adhesive tape can be used for light-duty interior applications where drilling is not preferred. For overhead and inverted mounting in caravans and marine cabins, screw mounting at multiple fixing points along the 500mm length is recommended to prevent centre sag and ensure the unit remains secure under road vibration and vessel movement.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

OEX GLX08H4V2 H4 LED Headlight Bulb 12/24V V2 H4 3600Lm 6000K 2 Pce Upgrade your halogen headlights to bright, modern LED performance with the OEX GLX08H4V2, a direct-fit H4 LED headlight bulb delivering 3600 lumens per pair at a crisp 6000K cool white output, designed for off-road vehicles operating on 12V or 24V systems. Product Overview The OEX GLX08H4V2 is a plug-and-play H4 LED headlight upgrade engineered for precision cut-off performance and straightforward halogen replacement. Sold as a pair, these V2 LED bulbs are built around high-brightness LEDs housed in an aluminium body heatsink to manage operating temperatures and extend service life in demanding conditions. With IP65 environmental protection and a temperature range of -40°C to +80°C, the GLX08H4V2 is purpose-built for off-road and 4WD use where conditions push standard globes to their limits. Compatibility with both negative and positive switching systems makes installation straightforward across a wide range of vehicles, and the P43t-38 base ensures a direct fit into standard H4 headlight housings. Important Note: The OEX GLX08H4V2 is designed for off-road use. Check your local road authority regulations before fitting LED headlight upgrades to road-registered vehicles in your state or territory. Features & Benefits 3600 lumens per pair providing a significant brightness increase over standard halogen H4 globes 6000K cool white colour temperature delivering crisp, modern white light for improved road and trail visibility Precision cut-off design minimising glare and maintaining correct beam pattern in H4 headlight housings Direct halogen upgrade fitting standard P43t-38 H4 housings for a straightforward plug-and-play installation 12/24V operation compatible with both standard automotive and truck or heavy vehicle electrical systems Suitable for negative and positive switching ensuring broad vehicle compatibility without wiring modifications Aluminium body heatsink managing LED operating temperatures for long-term reliability and consistent output IP65 environmental rating providing dust-tight and water jet protection for off-road and harsh environment use Wide temperature range rated from -40°C to +80°C for reliable performance in all Australian conditions Sold as a pair with one year warranty included Technical Specs Specification Details Part Number GLX08H4V2 Brand OEX Globe Style H4 Globe Base P43t-38 Globe Type LED Light Output 3,600 Lm (Pair) Colour Temperature 6000K Voltage 12/24V Number of Terminals 3 Height 81.9mm Environmental Rating IP65 Temperature Range -40°C to +80°C Switching Compatibility Negative and Positive Pack Quantity 2 (Pair) Warranty 1 Year Unit of Measure Each Product Group Lighting / Globes and Kits Compatible With / Goes Well With The OEX GLX08H4V2 is a direct replacement for standard H4 halogen globes with a P43t-38 base across a wide range of vehicles including: 4WD and off-road vehicles using H4 headlight housings including Toyota LandCruiser, Nissan Patrol, Mitsubishi Pajero, and similar platforms Trucks and commercial vehicles operating on 24V systems requiring an H4 LED upgrade Trailers and caravans with H4 auxiliary lighting setups Agricultural and mining equipment requiring durable LED globes rated for harsh environmental conditions Goes well with: OEX Driving Lights and Light Bars (to complement upgraded headlight output) OEX Wiring Harnesses and Relays (for clean auxiliary lighting installations) OEX GLX series LED globes (for full vehicle lighting upgrades across all positions) Frequently Asked Questions Q: Are the OEX GLX08H4V2 bulbs legal for road use in Australia? A: The GLX08H4V2 is designed and rated for off-road use only. Australian Design Rules (ADR) require headlight globes fitted to road-registered vehicles to carry ADR approval. Check with your local road authority or state transport department before fitting these bulbs to a road-registered vehicle in your state or territory. Q: How many bulbs are included in the GLX08H4V2 pack? A: The GLX08H4V2 is sold as a pair, meaning two H4 LED bulbs are included per pack. The 3600 lumen output figure quoted is the combined output for both bulbs together. Q: Will the GLX08H4V2 fit my vehicle's existing H4 headlight housing? A: The GLX08H4V2 uses a P43t-38 base, which is the standard base for H4 halogen globes. It is designed as a direct plug-and-play replacement for most H4 housings. Due to the aluminium heatsink body, confirm there is sufficient clearance inside your headlight housing before installation, particularly on vehicles with tight dust cover clearances. Q: Is the GLX08H4V2 compatible with 24V truck and heavy vehicle systems? A: Yes. The GLX08H4V2 is rated for 12/24V operation, making it suitable for trucks, buses, and heavy machinery running 24V electrical systems, as well as standard 12V passenger and 4WD vehicles. Q: Does the GLX08H4V2 work with both positive and negative switching headlight systems? A: Yes. The GLX08H4V2 is compatible with both negative and positive switching systems, which covers the vast majority of vehicles on the market. No additional wiring adapters or relay harnesses are required in most standard installations.Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less