ADR Approved Multi-Volt Round Amber Indicator Lamp Low-Profile Recessed Mount with 5-Year Warranty
Product Overview
The LED Autolamps 102AM is a multi-voltage round indicator lamp with an amber lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. Measuring 130mm in diameter at just 12mm deep, it delivers a flush, clean finish across a wide range of trailer and vehicle body applications.
Surface bases are available for installations requiring surface mounting rather than recessed fitting. ADR Australian road approved and rated IP67, the 102AM is backed by a 5-year warranty and as the amber lens counterpart to the clear lens 102ACM, it suits applications where a traditional amber indicator appearance is preferred.
Features & Benefits
Amber lens — delivers traditional amber indicator output with a consistently coloured lens appearance whether active or inactive
Low-profile recessed mount — 12mm depth sits flush with the mounting panel for a clean, integrated finish on trailer and truck bodies
Surface bases available — for installations requiring surface mounting rather than recessed fitting; contact F.A.E. for compatible surface base options
ADR Australian road approved — meets Australian Design Rules for legal on-road use as an indicator lamp
IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
Multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
Specification
Detail
SKU
102AM
Lamp Type
Indicator
Lens Colour
Amber
Voltage Range
12V / 24V
Diameter
130mm
Depth
12mm
Mounting
Low-profile recessed (surface base available)
Protection Rating
IP67
Compliance
ADR
Warranty
5 years
Compatible With / Goes Well With
Trailers, caravans, trucks, and commercial vehicles requiring recessed amber indicator lamps
12V light vehicles and 24V heavy transport applications
Trailer builds requiring ADR-approved indicator lighting
Compatible surface mount bases (available separately — confirm with F.A.E.)
LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 102AM approved for road use in Australia?
Yes. The LED Autolamps 102AM is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp.
How does the 102AM differ from the 102ACM?
The 102AM uses an amber lens for a traditional indicator appearance, while the 102ACM features a clear lens that appears colourless when inactive. Both share the same 130mm round recessed mount form factor and multi-voltage compatibility.
What mounting options are available for the 102AM?
The 102AM is designed for low-profile recessed mounting. Surface bases are also available for surface mount installations — contact F.A.E. for compatible options.
What is the IP rating on the 102AM?
The 102AM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
What warranty does the 102AM carry?
The 102AM is backed by a 5-year warranty from LED Autolamps.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
ADR Approved 12V Round Indicator Lamp Clear When Inactive, Low-Profile Recessed Mount
Product Overview
The LED Autolamps 102AC is a 12V round indicator lamp with a clear lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. At 130mm in diameter and just 12mm deep, it sits flush with the mounting panel for a clean, unobtrusive finish.
The clear lens appearance when inactive gives the 102AC a modern, sleek look that complements a wide range of trailer and vehicle body styles the amber indicator colour activates only when the lamp is in use. ADR road approved and rated IP67, it is backed by a 5-year warranty for long-term confidence.
Features & Benefits
Clear lens when inactive — the lamp presents a clean, clear appearance at rest; amber indicator colour activates only when the lamp is energised
Low-profile recessed mount — 12mm depth sits flush with the mounting panel for an integrated finish on trailer and truck bodies
130mm round form factor — suits standard recessed cutouts on trailers, caravans, and commercial vehicles
ADR road approved — meets Australian Design Rules for legal on-road use as an indicator lamp
IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
12V only — designed for 12V trailer and vehicle electrical systems
5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
Specification
Detail
SKU
102AC
Lamp Type
Indicator
Lens Colour
Clear (inactive)
Voltage
12V
Diameter
130mm
Depth
12mm
Mounting
Low-profile recessed
Protection Rating
IP67
Compliance
ADR
Warranty
5 years
Compatible With / Goes Well With
Trailers, caravans, trucks, and commercial vehicles requiring recessed indicator lamps
12V trailer and vehicle electrical systems
Trailer builds requiring ADR-approved indicator lighting with a clean, clear finish
LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 102AC approved for road use in Australia?
Yes. The LED Autolamps 102AC is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp.
What does "clear lens when inactive" mean?
When the lamp is not energised, the lens appears clear rather than amber. The amber indicator colour is produced by the LEDs and only visible when the lamp is activated.
What is the IP rating on the 102AC?
The 102AC is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
How does the 102AC differ from the 102A?
The 102AC features a clear lens that appears colourless when inactive, while the 102A uses an amber lens. Both are 12V recessed mount lamps in the same 130mm round form factor.
What warranty does the 102AC carry?
The 102AC is backed by a 5-year warranty from LED Autolamps — longer than the 1-year warranty on the 102A variant.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
ADR Approved Black Chrome Round Indicator Lamp with Clear Lens and 5-Year Warranty
Product Overview
The LED Autolamps 102ABC is a round indicator lamp with a distinctive black chrome finish and clear lens, designed for low-profile recessed mounting on trailers, trucks, and commercial vehicles. At 130mm in diameter and just 12mm deep, it delivers a sharp, premium aesthetic alongside reliable, road-legal indicator output.
Surface bases are also available for installations that require surface mounting rather than recessed fitting, giving builders and auto electricians flexibility in how they install the lamp. ADR approved and rated IP67, the 102ABC is backed by a 5-year warranty.
Features & Benefits
Black chrome finish — premium aesthetic suits trailer and truck builds where appearance matters alongside performance
Clear lens — clean, modern look with the indicator colour produced by the LEDs rather than a tinted lens
Low-profile recessed mount — 12mm depth sits flush with the mounting panel for an integrated finish on trailer and truck bodies
Surface bases available — for installations requiring surface mounting rather than recessed fitting; check with F.A.E. for compatible surface base accessories
ADR Australian road approved — meets Australian Design Rules for legal on-road use as an indicator lamp
IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
Specification
Detail
SKU
102ABC
Lamp Type
Indicator
Lens Colour
Clear
Housing Finish
Black Chrome
Diameter
130mm
Depth
12mm
Mounting
Low-profile recessed (surface base available)
Protection Rating
IP67
Compliance
ADR
Warranty
5 years
Compatible With / Goes Well With
Trailers, caravans, trucks, and commercial vehicles requiring recessed indicator lamps
Trailer builds requiring ADR-approved indicator lighting with a premium finish
Compatible surface mount bases (available separately — confirm with F.A.E.)
LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 102ABC approved for road use in Australia?
Yes. The LED Autolamps 102ABC is ADR Australian road approved, meeting Australian Design Rules requirements for legal on-road use as an indicator lamp.
What mounting options are available for the 102ABC?
The 102ABC is designed for low-profile recessed mounting. Surface bases are also available for surface mount installations — contact F.A.E. for compatible surface base options.
What is the IP rating on the 102ABC?
The 102ABC is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
Why does the 102ABC use a clear lens instead of an amber lens?
The clear lens gives the lamp a cleaner, more modern appearance. The amber indicator colour is produced directly by the LEDs behind the lens rather than relying on a tinted lens cover.
What warranty does the 102ABC carry?
The 102ABC is backed by a 5-year warranty from LED Autolamps, significantly longer than the standard 1-year warranty on earlier 102 series variants.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Smart App, IR Receiver & Remote Control For Effortless Control!
5M Smart LED Strip LightingEnhance your space with the Aerpro APLED5W. This advanced lighting solution features a Smart App, IR receiver, and remote control for effortless control. With voice control capabilities, you can easily adjust the lighting settings to your preference. Choose from a wide range of colors and effects to create the perfect ambiance.
The dimmable brightness allows for customizable lighting intensity. The 5M length can be trimmed to fit any space, and the IP65 water-resistant rating ensures durability. Easy installation is ensured with the flexible design and self-adhesive backing. Powered by a 240V AC supply, this Aerpro APLED5W 5M Smart LED Strip Lighting offers convenience and versatility.
SAFETY WARNING:
This product contains Button/Coin Cell Batteries. Keep batteries out of reach of children. If you suspect a battery has been swallowed or placed inside any part of the body seek medical attention immediately as batteries can cause severe or fatal injuries in 2 hours or less.
Legendary Products & Support From Authorized Dealers
When you choose Aerpro, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized Aerpro dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by Aerpro's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized Aerpro dealer today!
LED Autolamps 101BAR2 12V Stop Tail Indicator Lamp with Reflector Twin Blister Pack
A twin blister pack of budget 12V LED stop, tail, indicator, and reflector trailer lamps with IP67 rating and ECE road approval, the LED Autolamps 101BAR2 features 8 LEDs per lamp, a low-profile 100 x 100 x 22mm surface mount black housing, and a 40cm pre-wired cable, backed by a 5-year warranty.
Product Overview
The LED Autolamps 101BAR2 is the twin blister pack version of the 101BAR budget LED stop, tail, indicator, and reflector lamp designed for 12V trailer applications. Each lamp in the twin pack is identical to the 101BAR, measuring 100 x 100 x 22mm in a low-profile black housing with surface mount installation. Eight LEDs provide stop, tail, and indicator illumination alongside an integrated reflector. Current draw is 0.13A for stop, 0.04A for tail, and 0.12A for indicator at 13.8V. A 40cm pre-wired cable is included on each lamp. IP67 rated for waterproof and dustproof protection. ECE road approved with individual compliance numbers for stop/tail, indicator, and reflector functions. Supplied as a twin blister pack for complete left and right trailer lamp replacement or new installation.
Features & Benefits
Twin Pack for Complete Trailer Lamp Installation: The 101BAR2 is supplied as a twin blister pack, providing both left and right lamps in a single purchase for a complete trailer rear lamp installation or replacement.
Budget Trailer Lamp with Stop, Tail, Indicator, and Reflector Functions: Each lamp combines stop, tail, indicator, and reflector functions in a single low-profile unit, reducing the number of individual lamp assemblies required on budget trailer builds and replacements.
ECE Road Approved: Each lamp holds ECE road approval for stop/tail (S1-E9-02), indicator (2a-E9-01), and reflector (1A-E9-02) functions, confirming suitability for on-road trailer use.
IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust protection and waterproof protection against temporary immersion, suited to exposed trailer mounting locations in all weather conditions.
Low-Profile Black Housing: The low-profile 22mm depth black housing minimises protrusion from the trailer body surface, providing a compact and practical installation solution for budget trailers and caravans.
8 LEDs per Lamp: Eight LEDs per lamp provide the illumination required for stop, tail, and indicator functions, delivering reliable visibility for following traffic on road and in trailer applications.
40cm Pre-Wired Cable per Lamp: Each lamp is supplied with a 40cm pre-wired cable for direct connection to the trailer wiring harness.
12V Only: The 101BAR2 is designed for 12V DC trailer and vehicle electrical systems only.
5-Year Warranty: The 101BAR2 is backed by a 5-year LED Autolamps warranty.
Technical Specs
Specification
Detail
SKU
101BAR2
Brand
LED Autolamps
Function
Stop, Tail, Indicator, Reflector
Light Type
LED
LED Quantity
8 per Lamp
Input Voltage
12V DC
Current Draw - Stop
0.13A at 13.8V
Current Draw - Tail
0.04A at 13.8V
Current Draw - Indicator
0.12A at 13.8V
Dimensions
100mm x 100mm x 22mm
Housing Colour
Black
Mount
Surface Mount
Cable Length
40cm per Lamp
IP Rating
IP67
ECE Stop/Tail Approval
S1-E9-02
ECE Indicator Approval
2a-E9-01
ECE Reflector Approval
1A-E9-02
Pack Quantity
2 Lamps
Packaging
Twin Blister
Weight per Lamp
0.16kg
Warranty
5 Years
Compatible With
The 101BAR2 is compatible with 12V DC trailer and vehicle electrical systems only. ECE road approved for on-road trailer use. Confirm mounting dimensions and wiring requirements for your specific trailer before purchase. The single bulk boxed version is available as the 101BAR.
Frequently Asked Questions
How many lamps are included in the 101BAR2 pack?
The 101BAR2 is a twin blister pack containing two lamps, providing both left and right lamps for a complete trailer rear lamp installation or replacement in a single purchase.
What is the difference between the 101BAR2 and the 101BAR?
Both are the same lamp with identical specifications. The 101BAR2 is supplied as a twin blister pack for retail display, while the 101BAR is supplied individually in bulk boxed packaging.
Is the 101BAR2 compatible with 24V systems?
No. The 101BAR2 is designed for 12V DC systems only. Confirm your trailer's operating voltage before purchase.
Is the 101BAR2 ECE approved for on-road use?
Yes. Each lamp in the 101BAR2 pack holds ECE road approval for stop/tail (S1-E9-02), indicator (2a-E9-01), and reflector (1A-E9-02) functions, confirming suitability for on-road trailer use.
Does the 101BAR2 include an integrated reflector?
Yes. Each lamp includes an integrated reflector function alongside stop, tail, and indicator functions, with ECE reflector approval (1A-E9-02).Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
LED Autolamps 101BAR 12V Stop Tail Indicator Lamp with Reflector
A budget 12V LED stop, tail, indicator, and reflector trailer lamp with IP67 rating and ECE road approval, the LED Autolamps 101BAR features 8 LEDs, a low-profile 100 x 100 x 22mm surface mount design, and a 40cm pre-wired cable, backed by a 5-year warranty.
Product Overview
The LED Autolamps 101BAR is a budget LED stop, tail, indicator, and reflector lamp designed for 12V trailer applications. The low-profile unit measures 100 x 100 x 22mm and is surface mounted via the lamp body. Eight LEDs provide stop, tail, and indicator illumination alongside an integrated reflector. Current draw is 0.13A for stop, 0.04A for tail, and 0.12A for indicator at 13.8V. A 40cm pre-wired cable is included for connection to the trailer wiring harness. IP67 rated for waterproof and dustproof protection. ECE road approved with individual compliance numbers for stop/tail, indicator, and reflector functions, and CTA approved. The 101BAR is supplied in bulk boxed packaging and backed by a 5-year warranty. A twin blister pack version is available as the 101BAR2.
Features & Benefits
Budget Trailer Lamp with Stop, Tail, Indicator, and Reflector Functions: The 101BAR combines stop, tail, indicator, and reflector functions in a single low-profile unit, reducing the number of individual lamp assemblies required on budget trailer builds and replacements.
ECE Road Approved: The 101BAR holds ECE road approval with individual compliance numbers for stop/tail (R1-S1-E9-02.6444), indicator (2a-E9-01.6444), and reflector (1A-E9-02.6444) functions, along with CTA approval (CTA-060139), confirming suitability for on-road trailer use.
IP67 Waterproof and Dustproof Rating: The IP67 rating provides full dust protection and waterproof protection against temporary immersion, suited to exposed trailer mounting locations in all weather conditions.
Low-Profile Design: The low-profile 22mm depth minimises protrusion from the trailer body surface, providing a compact and practical installation solution for budget trailers and caravans.
8 LEDs for Stop, Tail, and Indicator Functions: Eight LEDs provide the illumination required for stop, tail, and indicator functions, delivering reliable visibility for following traffic on road and in trailer applications.
40cm Pre-Wired Cable: The 40cm pre-wired cable allows direct connection to the trailer wiring harness without requiring additional cable extension in most standard trailer wiring configurations.
12V Only: The 101BAR is designed for 12V DC trailer and vehicle electrical systems only.
5-Year Warranty: The 101BAR is backed by a 5-year LED Autolamps warranty.
Technical Specs
Specification
Detail
SKU
101BAR
Brand
LED Autolamps
Function
Stop, Tail, Indicator, Reflector
Light Type
LED
LED Quantity
8
Input Voltage
12V DC
Current Draw - Stop
0.13A at 13.8V
Current Draw - Tail
0.04A at 13.8V
Current Draw - Indicator
0.12A at 13.8V
Dimensions
100mm x 100mm x 22mm
Mount
Surface Mount
Cable Length
40cm
IP Rating
IP67
ECE Stop/Tail Approval
R1-S1-E9-02.6444
ECE Indicator Approval
2a-E9-01.6444
ECE Reflector Approval
1A-E9-02.6444
CTA Approval
CTA-060139
Packaging
Bulk Boxed
Weight
0.16kg
Warranty
5 Years
Compatible With
The 101BAR is compatible with 12V DC trailer and vehicle electrical systems only. ECE and CTA road approved for on-road trailer use in Australia. Confirm mounting dimensions and wiring requirements for your specific trailer before purchase. A twin blister pack version is available as the 101BAR2.
Frequently Asked Questions
Is the 101BAR ADR or ECE approved for on-road use?
The 101BAR holds ECE road approval with individual compliance numbers for stop/tail (R1-S1-E9-02.6444), indicator (2a-E9-01.6444), and reflector (1A-E9-02.6444) functions, along with CTA approval (CTA-060139), confirming suitability for on-road trailer use in Australia.
Is the 101BAR compatible with 24V systems?
No. The 101BAR is designed for 12V DC systems only. Confirm your trailer's operating voltage before purchase.
What is the difference between the 101BAR and the 101BAR2?
Both are the same lamp. The 101BAR is supplied in bulk boxed packaging, while the 101BAR2 is supplied in a twin blister pack for retail display. The lamp specifications are identical.
How long is the pre-wired cable on the 101BAR?
The 101BAR is supplied with a 40cm pre-wired cable for connection to the trailer wiring harness.
Does the 101BAR include a reflector?
Yes. The 101BAR includes an integrated reflector function alongside stop, tail, and indicator functions, with ECE reflector approval (1A-E9-02.6444).Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
LED Autolamps 10121/12SW 12V LED Interior Strip Light with On/Off Switch
A 12V slimline LED interior strip light delivering 670 lumens from 121 SMD LEDs with a 120-degree spread, integrated on/off switch, and clear lens, the LED Autolamps 10121/12SW is designed for interior lighting in caravans, trailers, campervans, and vehicles, mounted via two screws and backed by a 3-year warranty.
Product Overview
The LED Autolamps 10121/12SW is a 12V LED interior strip light in a low-profile slimline design, suitable for interior lighting in caravans, trailers, campervans, and vehicles. It delivers 670 lumens of clear light output from 121 SMD LEDs across a 120-degree spread angle for wide and even illumination coverage. The integrated on/off switch provides direct control of the light without requiring a separate switch installation. A 10cm pre-wired cable is provided. Current draw is 0.58A at 13.8V. The 10121/12SW is mounted via two screws and is backed by a 3-year LED Autolamps warranty. Supplied in single blister packaging.
Features & Benefits
670 Lumens from 121 SMD LEDs: The 10121/12SW delivers 670 lumens of clear light output from 121 SMD LEDs, providing strong and even interior illumination suited to caravan, campervan, and vehicle cabin applications.
120-Degree Spread Angle: The 120-degree spread angle provides wide and even illumination coverage across the interior space without hotspots or dark areas.
Clear Lens: The clear lens maximises light transmission from the SMD LEDs for maximum lumen output at the installation surface.
Integrated On/Off Switch: The built-in on/off switch provides direct control of the strip light without requiring a separate switch to be wired into the installation, simplifying the wiring and reducing the number of components required.
Low-Profile Slimline Design: The low-profile slimline chassis minimises protrusion from the mounting surface, providing a clean and unobtrusive appearance suited to caravan, campervan, and vehicle interior installations.
12V DC Operation with 10cm Pre-Wired Cable: The 10121/12SW operates on 12V DC at 0.58A at 13.8V, compatible with standard caravan, trailer, campervan, and vehicle 12V electrical systems. A 10cm pre-wired cable is included for connection to the vehicle or installation wiring.
2-Screw Surface Mount: The 10121/12SW is secured via two screws, providing a straightforward surface mount installation to ceiling panels, walls, and other interior surfaces.
3-Year Warranty: The 10121/12SW is backed by a 3-year LED Autolamps warranty.
Technical Specs
Specification
Detail
SKU
10121/12SW
Brand
LED Autolamps
Light Style
Interior Strip Light
Light Type
LED
Lens
Clear
Lumen Output
670lm
LED Quantity
121 SMD
Input Voltage
12V DC
Current Draw
0.58A at 13.8V
Spread Angle
120 Degrees
Switch
On/Off (Integrated)
Cable Length
10cm
Mount
2-Screw Surface Mount
Design
Low-Profile Slimline
Packaging
Single Blister
Warranty
3 Years
Compatible With
The 10121/12SW is compatible with 12V DC caravan, trailer, campervan, and vehicle electrical systems. Confirm mounting dimensions and wiring requirements for your specific installation before purchase.
Frequently Asked Questions
Does the 10121/12SW have an integrated on/off switch?
Yes. The 10121/12SW includes a built-in on/off switch, allowing direct control of the strip light without requiring a separate switch installation.
What is the lumen output of the 10121/12SW?
The 10121/12SW delivers 670 lumens from 121 SMD LEDs through a clear lens with a 120-degree spread angle.
How is the 10121/12SW mounted?
The 10121/12SW is secured via two screws to ceiling panels, walls, or other interior surfaces.
What is the current draw of the 10121/12SW?
The 10121/12SW draws 0.58A at 13.8V on a 12V DC system.
What is the warranty period for the 10121/12SW?
The 10121/12SW is backed by a 3-year LED Autolamps warranty.Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
24V Slimline Interior Strip Light 121 SMD LEDs, 6500K Cool White, 600mm, IP67.
Product Overview
The LED Autolamps 10121/24 is a 24V slimline interior LED strip lamp designed for use in trucks, buses, vans, trailers, and 24V commercial vehicle applications. At 600mm long with a slim 25mm width and just 10mm deep, this lamp packs 121 SMD LEDs into a low-profile strip format delivering high-brightness cool white illumination across a 120-degree spread for effective interior coverage.
The 6500K cool white colour temperature produces a crisp, bright daylight-style output suited to driver cabs, storage areas, and general interior lighting in 24V commercial vehicles. Note that this is the direct-feed version without an inbuilt switch a switched circuit or separate switch is required for on/off control. IP67 rated for both interior and exterior use, the 10121/24 is a reliable, long-lasting 24V interior lighting solution backed by a 3-year warranty. For the switch version, refer to the 10121/24SW.
Key Specifications
LED count: 121 SMD LEDs
Colour temperature: 6500K (cool white)
Light spread: 120-degree
Dimensions: 600mm x 25mm x 10mm
Switch: Not included direct feed (switched circuit required)
Mount type: Surface mount remove end bezels, screw fix
IP rating: IP67 (interior or exterior use)
Input voltage: 24V only
Current draw: Approx. 0.31A @ 28V
Warranty: 3 years
Brand: LED Autolamps
SKU: 10121/24
Features & Benefits
121 SMD LEDs: High LED count in a 600mm strip delivers impressive high-brightness cool white illumination for effective interior coverage across driver cabs, cargo areas, and utility vehicle interiors
6500K cool white: Crisp daylight-style colour temperature ideal for task lighting, driver cab illumination, and general interior lighting in 24V commercial vehicles
120-degree light spread: Wide angle illumination provides broad, even coverage across the interior area below the lamp
Ultra-slim 10mm profile: At just 10mm deep, the 10121/24 installs flush against headliners, walls, and surfaces without protruding into usable space
IP67 rated: Suitable for both interior and exterior use fully protected against dust ingress and temporary water immersion
Surface mount with end bezels: End bezels remove for concealed screw mounting, then refit for a clean, finished appearance with no visible fasteners
24V only: Designed for 24V commercial vehicle electrical systems including trucks, buses, trailers, and refrigerated van bodies
Low current draw: Approximately 0.31A at 28V, placing minimal load on the vehicle's 24V electrical system
3-year warranty: Backed by LED Autolamps' 3-year product warranty
Technical Specs
Specification
Detail
SKU
10121/24
Brand
LED Autolamps
LED Count
121 SMD LEDs
Colour Temperature
6500K (cool white)
Light Spread
120-degree
Dimensions
600mm x 25mm x 10mm
Switch
Not included direct feed
Mount Type
Surface mount end bezel removal, screw fix
IP Rating
IP67
Input Voltage
24V only
Current Draw
Approx. 0.31A @ 28V
Warranty
3 Years
Compatible With
Universal suits all 24V commercial vehicles and applications requiring interior or exterior strip lighting including:
Truck and bus driver cabs and sleeper compartments
Refrigerated trailer and van body interiors
Commercial van and utility vehicle interiors
24V marine and boat interior lighting
Toolboxes, canopies, and storage areas on 24V vehicles
Related Products:
LED Autolamps 10121/24SW same lamp with inbuilt push button switch (24V)
LED Autolamps 10121/12 same lamp in 12V version (without switch)
LED Autolamps 10121/12SW same lamp in 12V version with switch
Frequently Asked Questions
Does this lamp include a switch?
No the 10121/24 is the direct-feed version without an inbuilt switch. A switched circuit or external switch must be provided for on/off control. For the version with an inbuilt push button switch, refer to the LED Autolamps 10121/24SW.
What colour temperature is this lamp?
The 10121/24 is 6500K a cool white, daylight-style colour temperature that produces a bright, crisp light output suited to task and driver cab lighting in 24V commercial vehicles.
Is this lamp compatible with 12V vehicles?
No the 10121/24 is 24V only. For 12V applications, refer to the LED Autolamps 10121/12 (without switch) or 10121/12SW (with switch).
Is this lamp suitable for exterior use?
Yes the IP67 rating makes the 10121/24 suitable for both interior and exterior applications, including installation in areas exposed to rain, moisture, or wash-down conditions.
How is this lamp mounted?
Remove the end bezels, surface mount using two screw points through the exposed mounting holes, run wires through the mounting surface, then refit the bezels for a clean finished appearance.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
ADR Approved 25 LED Square Reversing Lamp with Clip-In Lens Bracket and 30cm Wire Included
Product Overview
The LED Autolamps 100WM is a 12/24V square reversing lamp fitted with 25 white LEDs, supplied with a surface mount bracket and 30cm pre-wired lead. Part of the proven 100 series, it shares the same form factor as the 100AM indicator and 100RM stop/tail lamps for a fully matched square rear lighting set.
The clip-in replaceable lens allows for quick lens swaps without replacing the full housing, and the modular mounting system integrates cleanly with other 100 series lamps. ADR approved under CRN35793 and rated IP67, backed by a 5-year warranty.
Features & Benefits
25 white LEDs — delivers bright, clear white reverse output for strong visibility when reversing
Original square series design — matches the 100AM and 100RM in form factor for a uniform full-function rear lighting set
Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime
ADR road approved — certified under CRN35793 for legal on-road use as a reversing lamp in Australia
IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
Bracket and 30cm pre-wired lead included — ready to mount and connect straight out of the pack
Modular mount — integrates with the 100 series modular mounting system
5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
Specification
Detail
SKU
100WM
Lamp Type
Reversing
LED Quantity
25 white
Voltage Range
12V / 24V
Cable Length
300mm
Mounting
Modular surface mount (bracket included)
Lens
Clip-in replaceable
Protection Rating
IP67
Compliance
ADR — CRN35793
Warranty
5 years
Compatible With / Goes Well With
Trailers, caravans, trucks, and tray body applications requiring a square reversing lamp
12V light vehicles and 24V heavy transport applications
Trailer builds requiring ADR-approved reversing lighting
LED Autolamps 100AM indicator lamp (same 100 series form factor)
LED Autolamps 100RM stop/tail lamp (same 100 series form factor)
LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 100WM approved for road use in Australia?
Yes. The 100WM is ADR approved under CRN35793, meeting Australian Design Rules requirements for legal on-road use as a reversing lamp.
How does the 100WM fit with other 100 series lamps?
The 100WM shares the same square form factor as the 100AM indicator and 100RM stop/tail lamps, completing the 100 series for a fully matched rear lighting set across all three functions.
What does the clip-in replaceable lens mean for maintenance?
The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field.
What is the IP rating on the 100WM?
The 100WM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
What warranty does the 100WM carry?
The 100WM is backed by a 5-year warranty from LED Autolamps.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
ADR Approved 123 LED Rear Combination Assembly with Individual Lens Replacement and 5-Year Warranty
Product Overview
The LED Autolamps 100BARWM is a 12/24V rear combination lamp assembly packing 123 LEDs across stop, tail, indicator, and reverse functions in a single surface-mount unit. At 350mm x 120mm x 31mm with a 290mm centre-to-centre mount, it's built for trailers, trucks, and tray bodies that need a full-function rear lighting solution in a clean, low-profile bar format.
Individual lens replacements are available, meaning each lens section can be swapped out independently without replacing the entire assembly a practical advantage for minimising downtime and replacement costs in the field. Pre-wired with a black housing, ADR approved via CTA060221, and rated IP67, the 100BARWM is backed by a 5-year warranty and engineered for reliable long-term service.
Features & Benefits
123 LEDs across four functions — high LED count delivers strong, consistent output across stop, tail, indicator, and reverse for maximum rear visibility
Individual lens replacements — each lens section can be replaced independently, reducing maintenance costs and avoiding full assembly replacement for a single damaged lens
ADR approved — manufacturer approval CTA060221; stop/tail CRN33402, indicator CRN33156 — compliant for road-legal use across Australia
IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
350mm x 120mm bar format — wide, low-profile assembly suits the rear panels of trailers, tray bodies, and trucks
Pre-wired, surface mount — 290mm centre-to-centre spacing; ready to connect and mount straight out of the pack
Black housing — professional finish suits a wide range of trailer and truck body aesthetics
5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
Specification
Detail
SKU
100BARWM
Lamp Type
Stop / Tail / Indicator / Reverse
LED Quantity
123
Voltage Range
12V – 24V
Dimensions
350mm x 120mm x 31mm
Mount Centre-to-Centre
290mm
Stop Current Draw
0.38A @ 13.8V
Tail Current Draw
0.04A @ 13.8V
Indicator Current Draw
0.38A @ 13.8V
Mounting
Surface mount
Connector
Pre-wired
Housing Colour
Black
Protection Rating
IP67
Stop/Tail Compliance
ADR — CRN33402
Indicator Compliance
ADR — CRN33156
Manufacturer Approval
ADR — CTA060221
Warranty
5 years
Weight
0.72 kg
Compatible With / Goes Well With
Trailers, tray bodies, trucks, and light commercial vehicles
12V light vehicles and 24V heavy transport applications
Trailer builds requiring ADR-approved full-function rear combination lighting
LED Autolamps individual replacement lenses for the 100 series
LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
What functions does the 100BARWM cover?
It combines stop, tail, indicator, and reverse into a single assembly, providing a complete rear lighting solution for trailers, trucks, and tray bodies.
What does individual lens replacement mean for maintenance?
Each lens section in the assembly can be replaced independently rather than replacing the entire unit — reducing costs and minimising downtime when a single lens is cracked or damaged.
What ADR approvals does the 100BARWM carry?
It holds manufacturer approval CTA060221, with stop/tail certified under CRN33402 and indicator under CRN33156, covering compliance for road-legal use in Australia.
What is the IP rating on the 100BARWM?
The 100BARWM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting.
Does the 100BARWM work on both 12V and 24V systems?
Yes. It operates across 12V to 24V, making it compatible with light vehicles as well as 24V heavy transport applications without any modification.
Weight
0.72 kg
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Three-Function ADR-Approved Tail Light Assembly Built for Trucks, Trailers, and Heavy Vehicles Pre-Wired and Ready to Fit.
Product Overview
The LED Autolamps 100BARRM is a 3-in-1 combination stop, tail, and indicator LED lamp assembly designed for trucks, semi-trailers, caravans, and heavy vehicles. At 350mm long and just 31mm deep, it combines three compliance-critical rear lighting functions into a single pre-wired, surface-mount unit reducing installation time and simplifying the wiring of new trailer builds and replacement lamp fitments.
Carrying full ADR road approval (CTA060221) with specific compliance codes for stop/tail (CRN33402) and indicator (CRN33156), the 100BARRM meets Australian road regulations out of the box. Rated to IP67 and backed by a 5-year warranty, it is built to handle the wash-downs, corrugations, and demanding operating conditions of Australian transport and touring environments. The individual lens replacement feature adds long-term serviceability when a lens is damaged, it can be replaced independently rather than replacing the entire assembly.
Key Specifications
Light functions: Stop / Tail / Indicator (3-in-1)
Voltage: 12V / 24V (dual voltage)
IP rating: IP67 — fully dust-tight; immersion-resistant to 1m depth for 30 minutes
Compliance: ADR Road Approved — CTA060221
Compliance codes: Stop/Tail — CRN33402 / Indicator — CRN33156
Mount type: Surface mount
Mount centre to centre: 290mm
Connector: Pre-wired
Housing colour: Black
Individual lens replacements: Yes
Dimensions: 350mm (L) × 120mm (W) × 31mm (D)
Current draw: Stop 0.38A / Tail 0.04A / Indicator 0.38A @ 13.8V
Weight: 0.72 kg
Warranty: 5 years
Features & Benefits
3-in-1 Combination Function — Stop, tail, and indicator in a single lamp assembly. One unit replaces three separate lamps, cutting installation complexity, reducing cable runs, and streamlining ADR compliance checks on trucks, trailers, and caravans.
Pre-Wired Connector — Supplied with a pre-wired connector for fast, direct installation without requiring custom wiring or termination work on site — a practical advantage for fleet fitouts and time-pressured workshop installs.
Individual Lens Replacements Available — If a lens is cracked or damaged, it can be replaced independently without swapping the entire lamp assembly. This lowers the long-term maintenance cost on fleet vehicles and working trailers where lens damage is an occupational reality.
ADR Road Approved — CTA060221 — Full ADR compliance for all three functions confirmed by approval number CTA060221. Stop/tail certified to CRN33402, indicator certified to CRN33156 — specific codes are on-page for compliance documentation purposes.
IP67 Waterproof Rating — Completely sealed against dust and capable of withstanding water immersion to 1 metre for 30 minutes. Built for pressure wash-downs, creek crossings, and heavy rain in Australian transport and touring environments.
12V / 24V Dual Voltage — Works natively across both light vehicle and heavy transport electrical systems without modification — a single SKU covering passenger vehicles, caravans, and 24V heavy trucks.
Low-Draw LED Efficiency — Tail function draws just 0.04A at 13.8V, significantly reducing electrical load compared to traditional incandescent equivalents — a meaningful advantage on multi-lamp trailer installations and dual battery touring setups.
Surface Mount with 290mm Centre-to-Centre Spacing — Standard surface mount configuration with a confirmed 290mm mounting centre distance for straightforward replacement fitment on existing trailer and truck body mounting positions.
5-Year Warranty — Backed by a 5-year manufacturer's warranty, above average for the combination lamp category and a strong confidence statement for fleet operators and owner-builders alike.
Technical Specs
Specification
Detail
Brand
LED Autolamps
Part Number
100BARRM
Light Functions
Stop / Tail / Indicator
Light Type
LED
Voltage
12V / 24V (Dual Voltage)
IP Rating
IP67
Compliance
ADR — CTA060221
Stop/Tail Compliance Code
CRN33402
Indicator Compliance Code
CRN33156
Mount Type
Surface Mount
Mount Centre to Centre
290mm
Connector
Pre-Wired
Housing Colour
Black
Individual Lens Replacements
Yes
Length
350mm
Width
120mm
Depth
31mm
Current Draw — Stop
0.38A @ 13.8V
Current Draw — Tail
0.04A @ 13.8V
Current Draw — Indicator
0.38A @ 13.8V
Weight
0.72 kg
Warranty
5 Years
Compatible With / Goes Well With
Suitable vehicle and trailer types:
Trucks and semi-trailers (12V and 24V systems)
B-doubles and road trains
Caravans and camper trailers
Box trailers and flatbed trailers
Horse floats and stock trailers
Buses and coaches
Heavy haulage and plant transport vehicles
Custom trailer builds requiring ADR-compliant combination rear lighting
Pairs well with:
LED Autolamps reverse lamps (separate unit required — this assembly does not include reverse function)
LED Autolamps 100BARRM individual replacement lens kits
LED Autolamps side marker and clearance lights for a matched full-vehicle LED upgrade
LED Autolamps number plate lights and wiring harness accessories
Weight
0.72 kg per unit. Confirmed by supplier.
Frequently Asked Questions
Does the 100BARRM include a reverse light function?
No. The 100BARRM provides stop, tail, and indicator functions only. A separate reverse lamp must be fitted if reverse lighting is required. Refer to the LED Autolamps range for a suitable matching reverse or combination unit.
What ADR approval does the 100BARRM carry?
The 100BARRM holds ADR approval CTA060221. Stop and tail functions are certified to CRN33402 and the indicator function is certified to CRN33156 — confirming full road-legal compliance for all three functions on Australian public roads.
What does "individual lens replacements" mean in practice?
If a lens is cracked or damaged in service, the individual lens can be replaced separately without replacing the entire lamp assembly — reducing repair costs and downtime on working vehicles and fleet trailers.
Is the 100BARRM suitable for both 12V and 24V vehicles?
Yes. The 100BARRM operates across 12V and 24V without modification, making it suitable for both light recreational vehicles and heavy commercial transport in a single SKU.
What is the current draw of the 100BARRM across its three functions?
At 13.8V, the stop and indicator functions each draw 0.38A, while the tail function draws just 0.04A — well below the current demand of equivalent incandescent lamps and suitable for multi-lamp installations on dual battery touring setups.
Legendary Products & Support From Authorized Dealers
When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support.
▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that?
Choose wisely. Buy from Frankies BrandBeast today!
Designed to Work with Marker Lamp
Features:
0.5m Hard wired cable
White deflector base
Virtually unbreakable polycarbonate lens
5-year L.E.D Warranty
Rated to 100,000 hours of L.E.D life
IP Rating: IP66 and IP68
ADR Approved
Current draw: 0.02A
Legendary Products & Support From Authorized Dealers
When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice:
▸ Expert Knowledge & Training
Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations.
▸ Authorized Warranty Protection:
We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support.
▸ Reliable Customer Support:
If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently.
▸ Protect Your Investment:
Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that?
Choose wisely. Buy from an authorized NARVA dealer today!
