ECE Approved 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens, 281x101mm, IP67 Product Overview The LED Autolamps 82CARW is a 12V rear combination lamp assembly covering stop, tail, indicator, and reverse functions with a distinctive clear lens, measuring 281mm x 101mm x 30mm on a surface mount bracket. The clear lens gives an unobtrusive, modern appearance when inactive with function colours showing only when the lamp is energised. ECE Australian road approved and rated IP67, backed by a 5-year warranty. Features & Benefits Clear lens — clean, modern appearance when inactive; function colours activate when energised Stop, tail, indicator, and reverse in one assembly — four functions in a single surface-mount unit Low-profile 30mm depth — slim bracket sits close to the panel surface ECE Australian road approved — meets international and Australian road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 82CARW Lamp Type Stop / Tail / Indicator / Reverse Voltage 12V Dimensions 281mm x 101mm x 30mm Lens Clear Mounting Surface mount (bracket) Protection Rating IP67 Compliance ECE (Australian road approved) Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a 12V four-function rear combination lamp with a clear lens LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 82CARW approved for road use in Australia? Yes. The 82CARW is ECE Australian road approved, meeting international and Australian road approval standards for legal on-road use across all four functions. What does the clear lens look like when the lamp is inactive? The clear lens appears colourless and unobtrusive when inactive. When energised, the stop/tail show red, the indicator shows amber, and the reverse shows white — each colour produced by the LEDs behind the clear lens. What functions does the 82CARW cover? It combines stop, tail, indicator, and reverse functions in a single surface-mount bracket assembly. What is the IP rating on the 82CARW? The 82CARW is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 82CARW carry? The 82CARW is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 36 LED Stop/Tail Lamp Clip-In Lens, 100x100mm, 40cm Wire, IP67 Product Overview The LED Autolamps 80RM is a 12/24V stop/tail lamp with 36 LEDs and a clip-in replaceable lens, measuring 100mm x 100mm x 28mm in a black housing with a 60mm centre-to-centre mount and 40cm pre-wired cable. Certified under CRN33059 matching the stop/tail compliance reference across the 80 series combination lamps it is the natural standalone stop/tail companion to the 80WM reverse lamp for a complete individually-mounted 80 series rear lighting set. Drawing 0.33A stop and 0.06A tail at 13.8V. Rated IP67 and backed by a 5-year warranty. Features & Benefits 36 LEDs — delivers strong, consistent stop/tail output across the 100mm square lamp face Clip-in replaceable lens — lens swaps independently without removing the full housing from the panel ADR approved — certified under CRN33059 for legal on-road use as a stop/tail lamp 40cm pre-wired cable — generous lead for flexible installation routing 60mm centre-to-centre mount — matches the 80WM for a uniform installation across the 80 series IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 80RM Lamp Type Stop / Tail LED Quantity 36 Housing Colour Black Voltage Range 12V / 24V Dimensions 100mm x 100mm x 28mm Mount Centre-to-Centre 60mm Stop Current Draw 0.33A @ 13.8V Tail Current Draw 0.06A @ 13.8V Cable Length 400mm Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR — CRN33059 Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring a standalone stop/tail lamp 12V light vehicles and 24V heavy transport applications LED Autolamps 80WM reverse lamp (same 100mm x 100mm form factor, 60mm mount — natural pair) LED Autolamps 80BARM and 80BARRM (same CRN33059 stop/tail certification) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 80RM approved for road use in Australia? Yes. The 80RM is ADR approved under CRN33059, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. How does the 80RM pair with the 80WM? Both the 80RM and 80WM share the same 100mm x 100mm x 28mm form factor and 60mm centre-to-centre mount — making them a natural matched pair for stop/tail and reverse functions on the same installation. What is the current draw of the 80RM? Stop draws 0.33A and tail draws 0.06A at 13.8V — consistent with the stop/tail current draw across the full 80 series combination lamps. What does the clip-in lens mean for maintenance? The lens clips out independently, allowing replacement without removing the full lamp from the mounting surface — the same serviceable lens design used throughout the 80 series. What warranty does the 80RM carry? The 80RM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved Red/Amber Side Marker with Clip-In Replaceable Lens 58x35mm, IP67, 5-Year Warranty Product Overview The LED Autolamps 58ARM is a 12/24V red/amber side marker lamp with a clip-in replaceable lens, measuring 58mm x 35mm x 21mm in a black housing with a 28mm centre-to-centre mount. The dual red/amber output delivers lateral visibility from both directions in a single compact unit, with the clip-in lens allowing field replacement without removing the full housing. Approved under CRN36841 and ADR 45/01, rated IP67, and backed by a 5-year warranty. Features & Benefits Red/amber dual-colour output — red from the rear, amber from the front — meets lateral visibility compliance requirements from both directions in a single lamp Clip-in replaceable lens — lens swaps independently without removing the full housing from the mounting panel Compact 58mm x 35mm form factor — low-profile surface mount suits a wide range of trailer and truck body side panel positions ADR approved — certified under CRN36841 and ADR 45/01 for legal on-road use as a side marker IP67 rated — fully sealed against dust and water immersion Pre-wired — ready to connect on installation 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 58ARM Lamp Type Side Marker LED Colour Red / Amber Housing Colour Black Voltage Range 12V / 24V Dimensions 58mm x 35mm x 21mm Mount Centre-to-Centre 28mm Current Draw 0.1A @ 13.8V Lens Clip-in replaceable Mounting Surface mount Connector Pre-wired Protection Rating IP67 Compliance ADR 45/01 — CRN36841 Packaging Blister pack Warranty 5 years Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring red/amber dual-colour side marker lamps 12V light vehicles and 24V heavy transport applications LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 58ARM approved for road use in Australia? Yes. The 58ARM is ADR approved under CRN36841 and ADR 45/01, meeting Australian Design Rules requirements for legal on-road use as a side marker lamp. Why does a side marker need both red and amber output? Side markers show red from the rear and amber from the front, meeting lateral visibility compliance requirements from both directions in a single lamp. What does the clip-in lens mean for maintenance? The lens clips out independently, allowing replacement without removing the full lamp from the mounting surface — reducing maintenance time and cost. What is the IP rating on the 58ARM? The 58ARM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 58ARM carry? The 58ARM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 49/00 Approved Rectangular Stop/Tail Lamp with Black Bracket and Clip-In Lens IP67 Product Overview The LED Autolamps 200BRM is a 12/24V rectangular stop/tail lamp in the classic 200 series form factor, measuring 200mm x 50mm x 28mm with a black surface mount bracket. Pre-wired and ADR 49/00 compliant, it fits a wide range of trailers, trucks, and commercial vehicles with a 160mm centre-to-centre mount spacing. The clip-in replaceable lens allows for quick, cost-effective lens swaps without replacing the full housing. Drawing 0.32A at 13.8V and rated IP67, backed by a 5-year warranty. Features & Benefits Original rectangular 200 series design — the proven 200mm x 50mm form factor suits a wide range of trailer, truck, and tray body applications Clip-in replaceable lens — lens swaps independently from the housing, reducing replacement costs and minimising downtime when a lens is damaged Black housing — suits a wide range of trailer and truck body finishes with a clean, professional look ADR 49/00 compliant — meets Australian Design Rules for legal on-road use as a stop/tail lamp IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments 12/24V multi-voltage — compatible with both 12V light vehicles and 24V heavy transport without modification Pre-wired, surface mount — 160mm centre-to-centre spacing; ready to connect and mount straight out of the pack 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 200BRM Lamp Type Stop / Tail Voltage Range 12V – 24V Dimensions 200mm x 50mm x 28mm Mount Centre-to-Centre 160mm Current Draw 0.32A @ 13.8V Mounting Surface mount Connector Pre-wired Housing Colour Black Lens Clip-in replaceable Protection Rating IP67 Compliance ADR 49/00 Warranty 5 years Compatible With / Goes Well With Trailers, tray bodies, trucks, and light commercial vehicles 12V light vehicles and 24V heavy transport applications Trailer builds requiring ADR 49/00 approved stop/tail lighting LED Autolamps 200 series indicator and reverse lamps (same rectangular form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 200BRM approved for road use in Australia? Yes. The 200BRM is ADR 49/00 compliant, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. What does the clip-in replaceable lens mean for maintenance? The lens clips out independently from the housing and can be replaced without swapping the entire lamp unit — saving cost and reducing installation time in the field. What is the centre-to-centre mounting distance on the 200BRM? The 200BRM has a 160mm centre-to-centre mount spacing. Confirm this measurement against your panel or bracket before installation. What is the IP rating on the 200BRM? The 200BRM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and truck body mounting. What warranty does the 200BRM carry? The 200BRM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Chrome Surface Mount Replacement Bracket for LED Autolamps 200 and 201 Series Lamps Product Overview The LED Autolamps 200B1C is a chrome surface mount replacement bracket designed to suit the 200 and 201 series rectangular lamp range. Measuring 200mm x 50mm x 20mm and constructed from ABS material, it provides a straightforward bracket replacement or spare fitting for 200 series lamps already in service. Features & Benefits Suits 200 and 201 series lamps — purpose-built replacement bracket for the full 200/201 series rectangular lamp range Chrome finish — premium appearance suits builds where a polished bracket is preferred Surface mount design — mounts directly to flat trailer and truck body panels ABS construction — lightweight, impact-resistant material suited to outdoor vehicle body applications 200mm x 50mm form factor — matches the 200 series lamp footprint precisely Technical Specs Specification Detail SKU 200B1C Type Replacement Bracket Finish Chrome Material ABS Dimensions 200mm x 50mm x 20mm Mounting Surface mount Suits LED Autolamps 200 and 201 series lamps Compatible With / Goes Well With LED Autolamps 200BRM stop/tail lamp (200 series) LED Autolamps 200BAM indicator lamp (200 series) LED Autolamps 200BARM and 200BARWM combination lamps (200 series) LED Autolamps 200BIRSTME2 and other 200 series rear combination lamps LED Autolamps 201 series rectangular lamps Frequently Asked Questions What lamps does the 200B1C bracket suit? The 200B1C is designed to suit the full LED Autolamps 200 and 201 series rectangular lamp range. Confirm compatibility with your specific lamp variant with F.A.E. before ordering. What material is the 200B1C bracket made from? The bracket is constructed from ABS — a lightweight, impact-resistant thermoplastic suited to outdoor vehicle body and trailer applications. Is this a lamp or a bracket only? The 200B1C is a bracket only — no lamp is included. Lamps must be purchased separately. What finish does the 200B1C have? The 200B1C has a chrome finish. For a black bracket option, refer to other 200 series bracket variants available in the LED Autolamps range. What are the dimensions of the 200B1C bracket? The bracket measures 200mm x 50mm x 20mm, matching the footprint of the 200 series lamp range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Bulletproof Series Twin Pack IP68, No Lens, Licence Plate, 10-Year Warranty Product Overview The LED Autolamps 210BARLP2 is part of the premium Bulletproof Series a twin blister pack of 12V rear combination lamps with integrated licence plate illumination, engineered for maximum durability and longevity. The standout features are the IP68 rating (fully sealed for prolonged submersion beyond 1 metre), the no-lens design for greater impact resistance, and the exceptional 10-year warranty. Measuring 210mm x 96mm x 24mm with 160mm centre-to-centre mounting and 40cm cable leads, the 210BARLP2 is ECE Australian road approved and suited to boat trailers, heavy-use trailers, and any application demanding the highest level of lamp durability. Features & Benefits Bulletproof Series — premium heavy-duty construction engineered for maximum impact resistance and longevity in demanding trailer applications No lens design — eliminates the lens as a failure point; the LED array is directly exposed, reducing the risk of lens cracking, fogging, or UV degradation over time IP68 rated — fully sealed for prolonged submersion beyond 1 metre; a step above standard IP67 waterproofing Fully submersible — suited to boat trailer launching, agricultural, and marine-adjacent environments Integrated licence plate lamp — built-in number plate illumination in each lamp unit ECE Australian road approved — meets international and Australian road approval standards for legal on-road use 10-year warranty — the strongest warranty on any LED Autolamps lamp in this catalogue; a standout commitment to long-term reliability Twin blister pack with 40cm cables — both lamps with pre-wired leads; ready for a complete left and right installation 12V only — designed for 12V trailer and vehicle electrical systems Technical Specs Specification Detail SKU 210BARLP2 Pack Contents 2 lamps + 40cm cables Series Bulletproof Lamp Type Stop / Tail / Indicator / Licence Plate Voltage 12V Length 210mm Width 24mm Height 96mm Mount Centre-to-Centre 160mm Lens No lens design Protection Rating IP68 (fully submersible) Compliance ECE (Australian road approved) Warranty 10 years Compatible With / Goes Well With Boat trailers, heavy-use trailers, and agricultural equipment requiring the highest durability rear combination lighting 12V trailer and vehicle electrical systems Applications requiring IP68-rated fully submersible rear combination lighting LED Autolamps 209GARLP2 (similar function set, IP67 rated, alternative option) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What makes the Bulletproof Series different from standard LED Autolamps lamps? The Bulletproof Series is built to a higher durability standard — IP68 rating, no-lens construction to eliminate lens failures, and a 10-year warranty that significantly exceeds the 5-year warranty on standard LED Autolamps products. What does the no-lens design mean? Rather than using a conventional plastic or polycarbonate lens over the LEDs, the no-lens design exposes the LED array directly. This eliminates the lens as a common failure point — preventing cracking, UV yellowing, and fogging over time. What is IP68 and how does it differ from IP67? IP67 covers water immersion up to 1 metre for 30 minutes. IP68 is rated for continuous submersion beyond 1 metre — making the 210BARLP2 suitable for boat trailer launching and other environments with prolonged water exposure. Is the 210BARLP2 approved for road use in Australia? Yes. The 210BARLP2 is ECE Australian road approved, meeting international road approval standards accepted for legal on-road use in Australia. What warranty does the 210BARLP2 carry? The 210BARLP2 is backed by a 10-year warranty from LED Autolamps — the strongest warranty offered in this range. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12/24V Red/Amber Side Marker Clear Clip-In Lens, Classic Truck Style, 16cm Cable Product Overview The LED Autolamps 42ARM is a 12/24V red/amber combination side marker lamp in a classic truck-style housing with a clear clip-in replaceable lens and a 16cm pre-wired cable. The dual red/amber output delivers visibility from both directions in a single lamp the clear lens provides a clean, modern appearance when inactive. ADR approved, compatible with both 12V and 24V electrical systems. Features & Benefits Red/amber combination — dual-colour output delivers red from the rear and amber from the front for complete lateral visibility compliance in a single unit Clear clip-in lens — replaceable lens snaps in and out independently without removing the lamp housing; clean appearance when inactive Classic truck-style marker — traditional truck marker lamp form factor suits a wide range of commercial vehicle and trailer body styles 16cm pre-wired cable — ready to connect on installation ADR approved — meets Australian Design Rules for legal on-road use as a side marker lamp 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport Technical Specs Specification Detail SKU 42ARM Lamp Type Side Marker LED Colour Red / Amber Lens Colour Clear (clip-in) Voltage Range 12V / 24V Cable Length 160mm Mounting Surface mount Compliance ADR Compatible With / Goes Well With Trucks, trailers, and commercial vehicles requiring red/amber dual-colour side marker lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 1458ARM red/amber side marker (same dual-colour concept, different form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 42ARM approved for road use in Australia? Yes. The LED Autolamps 42ARM is ADR approved, meeting Australian Design Rules requirements for legal on-road use as a side marker lamp. Why does a side marker need both red and amber output? Side markers show red towards the rear and amber towards the front when viewed from the side — meeting lateral visibility compliance requirements from both directions in a single lamp. What does the clip-in lens mean for maintenance? The clear lens clips in and out independently, allowing it to be replaced without removing the full lamp housing — reducing cost and time during field maintenance. What is the IP rating on the 42ARM? IP rating was not confirmed in available supplier data — check with LED Autolamps before use in exposed or submerged applications. What warranty does the 42ARM carry? Warranty information was not confirmed in available supplier data. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 and ECE Approved 12/24V Licence Plate Lamp Black Housing, Two Required for Compliance Product Overview The LED Autolamps 41BLM is a 12/24V LED licence plate lamp with a black housing measuring 70mm x 42mm x 40mm, supplied with a 0.25m cable lead and a 45mm centre-to-centre mount. Both ADR 48/00 and ECE approved two lamps are required for a compliant installation. Drawing 0.05A at 13.8V and rated IP67, backed by a 5-year warranty. Features & Benefits Black housing — clean, unobtrusive finish suits a wide range of trailer and vehicle rear panel aesthetics ADR 48/00 and ECE approved — dual compliance meets both Australian and international road approval standards; two lamps required for compliance IP67 rated — fully sealed against dust and water immersion 0.25m pre-wired cable — ready to connect on installation Very low current draw — 0.05A at 13.8V for minimal electrical system impact 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 41BLM Lamp Type Licence Plate Light Voltage Range 12V – 24V Dimensions 70mm x 42mm x 40mm Mount Centre-to-Centre 45mm Current Draw 0.05A @ 13.8V Cable Length 0.25m Housing Colour Black Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 / ECE ADR Note Two lamps required for compliance Warranty 5 years Weight 0.14 kg Compatible With / Goes Well With Trailers, trucks, and commercial vehicles requiring ADR 48/00 compliant licence plate illumination 12V light vehicles and 24V heavy transport applications LED Autolamps 30BLM (smaller 65mm black licence plate lamp — also two-lamp compliance) LED Autolamps 35BLM (single-lamp ADR compliance alternative) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 41BLM lamps are required for ADR compliance? Two lamps are required to meet ADR 48/00 compliance. Purchase two units for a fully compliant number plate light installation. Is the 41BLM approved for road use in Australia? Yes. The 41BLM is approved under both ADR 48/00 and ECE, meeting Australian and international road approval standards for legal on-road use as a licence plate lamp. How does the 41BLM compare to the 30BLM? The 41BLM is larger at 70mm x 42mm x 40mm with a 45mm centre-to-centre spacing and 0.25m cable, while the 30BLM is 65mm x 30mm x 24mm with a 65mm spacing and 0.14m cable. Both require two lamps for ADR compliance and are black housing variants. What is the IP rating on the 41BLM? The 41BLM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed outdoor trailer and vehicle mounting. What warranty does the 41BLM carry? The 41BLM is backed by a 5-year warranty from LED Autolamps. Weight 0.14 kg Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail/Indicator/Licence Plate Lamp Twin Pack Fully Submersible, 8m Kit Available Product Overview The LED Autolamps 209GARLP2 is the twin pack variant of the 209GARL4P supplied as a pair of fully submersible rear combination lamps covering stop, tail, indicator, reflector, and licence plate functions in the same 210mm x 110mm x 28mm housing. The twin pack delivers a complete left and right rear installation in a single purchase. Compatible with LED Autolamps' plug-in cable kit system with an 8-metre kit available. ADR approved and backed by a 5-year warranty. Features & Benefits Twin pack — both lamps supplied for a complete left and right rear installation in a single purchase Integrated licence plate lamp — eliminates the need for a separate number plate light, reducing components and wiring Fully submersible — engineered for full water submersion beyond standard IP67; suited to boat trailers, agricultural, and wash-down applications Plug-in cable kit compatible — compatible with LED Autolamps' plug-in cable kit for faster, tool-free wiring 8-metre cable kit available — optional long cable kit for larger or stretched trailer installations Stop, tail, indicator, reflector, and licence plate in one lamp — five functions in a single unit per side ADR approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 209GARLP2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reflector / Licence Plate Voltage 12V Dimensions 210mm x 110mm x 28mm Mounting Surface mount Protection Rating IP67 (fully submersible) Compliance ADR Cable Kit Plug-in compatible; 8m kit available Warranty 5 years Compatible With / Goes Well With Boat trailers, agricultural trailers, and equipment requiring fully submersible rear combination lighting with licence plate Trailers requiring longer cable runs — 8m kit available LED Autolamps plug-in cable kit system (confirm compatible cable kit with F.A.E.) LED Autolamps 209GARL4P (same lamp, single unit with 4-pin plug) LED Autolamps 209GAR4P (same form factor, without licence plate lamp) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions What is included in the 209GARLP2 twin pack? The pack contains two lamps — providing a complete left and right rear installation in a single purchase. How does the 209GARLP2 differ from the 209GARL4P? The 209GARLP2 is supplied as a twin pack, while the 209GARL4P is a single lamp with a 4-pin plug connector. Both share the same 210mm x 110mm fully submersible form factor with integrated licence plate lamp. What does fully submersible mean beyond IP67? IP67 covers water immersion up to 1 metre for 30 minutes. The 209GARLP2 is specified as fully submersible — engineered for extended submersion suited to boat trailer launching, agricultural, and wash-down environments. What is the 8-metre cable kit? An optional 8-metre plug-in cable kit is available for trailer installations where standard cable lengths are insufficient. Contact F.A.E. to confirm the compatible cable kit part number. Is the 209GARLP2 compatible with 24V systems? No. The 209GARLP2 is a 12V-only lamp and is not rated for 24V applications. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail/Indicator/Licence Plate Lamp Fully Submersible, 8m Kit Available Product Overview The LED Autolamps 209GARL4P is the licence plate variant of the 209GAR4P adding an integrated number plate light to the stop, tail, indicator, and reflector functions in the same 210mm x 110mm x 28mm fully submersible housing. The built-in licence plate lamp eliminates a separate fitting, making it a practical all-in-one solution for boat trailers, agricultural trailers, and any application requiring both rear combination lighting and number plate illumination. Compatible with LED Autolamps' plug-in cable kit system with an 8-metre kit available for longer trailer runs. ADR approved and backed by a 5-year warranty. Features & Benefits Integrated number plate lamp — built-in licence plate illumination eliminates the need for a separate lamp, reducing components and wiring Fully submersible — engineered for full water submersion beyond standard IP67; suited to boat trailers, agricultural, and wash-down applications Plug-in cable kit compatible — compatible with LED Autolamps' plug-in cable kit for faster, tool-free wiring connections 8-metre cable kit available — optional long cable kit for larger or stretched trailer installations Stop, tail, indicator, reflector, and licence plate in one lamp — five functions in a single unit ADR approved — meets Australian Design Rules for legal on-road use across all functions IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 209GARL4P Lamp Type Stop / Tail / Indicator / Reflector / Licence Plate Voltage 12V Dimensions 210mm x 110mm x 28mm Mounting Surface mount Protection Rating IP67 (fully submersible) Compliance ADR Cable Kit Plug-in compatible; 8m kit available Warranty 5 years Compatible With / Goes Well With Boat trailers, agricultural trailers, and equipment requiring fully submersible rear combination lighting with licence plate Trailers requiring longer cable runs — 8m kit available LED Autolamps plug-in cable kit system (confirm compatible cable kit with F.A.E.) LED Autolamps 209GAR4P (same form factor, without licence plate lamp) LED Autolamps 207BARLP2 and 207BARL4P (same licence plate integration, different form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 209GARL4P approved for road use in Australia? Yes. The LED Autolamps 209GARL4P is ADR approved, meeting Australian Design Rules requirements for legal on-road use across all five functions including the licence plate lamp. How does the 209GARL4P differ from the 209GAR4P? The 209GARL4P adds an integrated number plate lamp to the same fully submersible 210mm x 110mm stop/tail/indicator/reflector form factor as the 209GAR4P. Choose the 209GARL4P where licence plate illumination is required from the same unit. What does fully submersible mean beyond IP67? IP67 covers water immersion up to 1 metre for 30 minutes. The 209GARL4P is specified as fully submersible, meaning it is engineered for extended submersion — suited to boat trailer launching, agricultural, and wash-down environments. What is the 8-metre cable kit? An optional 8-metre plug-in cable kit is available for trailer installations where standard cable lengths are insufficient. Contact F.A.E. to confirm the compatible cable kit part number. Is the 209GARL4P compatible with 24V systems? No. The 209GARL4P is a 12V-only lamp and is not rated for 24V applications. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Front Indicator/Marker Twin Pack Bullbar Retrofit, IP67, DRL-Ready Product Overview The LED Autolamps 175AWTB2 is a 12V front indicator and marker lamp supplied as a twin blister pack, purpose-designed as a retrofit fit for bullbars on 4WD and light commercial vehicles. Measuring 225mm x 56mm x 27mm, the pair replaces front indicator/marker lamps on bullbar installations with an ECE-approved, IP67-rated LED solution. For vehicles requiring a DRL (Daytime Running Light) function, the optional LED Autolamps DRLHOTDOG accessory is required the 175AWTB2 does not include DRL output as standard. Backed by a 5-year warranty. Features & Benefits Twin blister pack — both lamps supplied for a complete left and right front indicator/marker installation Retro-fit design for bullbars — purpose-engineered to replace OEM front marker and indicator lamps in bullbar installations on 4WDs and light commercial vehicles ECE road approved — meets international road approval standards for legal on-road use as a front indicator/marker lamp IP67 rated — fully sealed against dust and water immersion, built for outdoor and off-road environments DRL-capable with optional accessory — DRL function is available when paired with the LED Autolamps DRLHOTDOG (sold separately) 12V only — designed for 12V vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 175AWTB2 Pack Contents 2 lamps (twin) Lamp Type Front Indicator / Marker Voltage 12V Dimensions 225mm x 56mm x 27mm DRL Function Requires DRLHOTDOG accessory (sold separately) Mounting Bullbar retrofit Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With 4WD and light commercial vehicles with bullbar installations requiring front indicator/marker lamps Vehicles requiring ECE-approved front marker and indicator lighting LED Autolamps DRLHOTDOG accessory (required for DRL function — sold separately) LED Autolamps wiring harnesses and lighting accessories Frequently Asked Questions Is the 175AWTB2 approved for road use in Australia? Yes. The 175AWTB2 is ECE road approved, meeting international road approval standards accepted for legal on-road use in Australia as a front indicator and marker lamp. Does the 175AWTB2 include a DRL function? No. The 175AWTB2 does not include DRL output as standard. To add a Daytime Running Light function, the LED Autolamps DRLHOTDOG accessory must be purchased and fitted separately. What vehicles does the 175AWTB2 suit? The 175AWTB2 is designed as a retrofit for bullbar installations on 4WD and light commercial vehicles. Confirm compatibility with your specific bullbar and vehicle model with F.A.E. before ordering. Is the 175AWTB2 rated for off-road conditions? Yes. With an IP67 rating, the 175AWTB2 is fully sealed against dust and water immersion — built to handle the conditions encountered in off-road and 4WD use. What warranty does the 175AWTB2 carry? The 175AWTB2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

European-Inspired Sequential Indicator Combination Lamp Pair Diffused Tail, 284mm, ECE Approved, 10–30V. Product Overview The LED Autolamps 284ARWM-2 is a twin pack of 284 Series "Zeon" rear combination lamps a matched left and right pair delivering stop, diffused tail, sequential indicator, reverse, and inbuilt reflector functions in a single European-inspired slimline unit. The standout feature is the sequential indicator: amber LEDs sweep outwards in a dynamic sequence pattern rather than a standard on/off flash, delivering a premium, high-visibility indicator style associated with high-end European vehicles. The European-inspired 284 Series design combines a diffused tail light with a sequential indicator that lights up in a dynamic sequence, along with stop, reverse, and an inbuilt reflex reflector, all blended together in one compact unit. The lamps are ECE Australian road approved and EMC protected. Each lamp measures 284mm x 100mm x 37mm and is suitable for both 12V and 24V systems. Installation uses a bolt-on surface mount with stainless steel fittings, and includes a 28cm pre-wired cable. The lamps are also compatible with the optional multi-fit bracket MFBKT, sold separately. Key Specifications Functions: Stop, tail (diffused), sequential indicator, reverse, reflector Voltage: 10–30V DC (multivolt suits 12V and 24V) Dimensions: 284mm x 100mm x 37mm Cable length: 28cm Mount type: Horizontal surface mount bolts through rear, wire through 10mm hole Optional bracket: MFBKT multi-fit bracket (sold separately) IP rating: IP67 Compliance: ECE Australian road approved, EMC protected Warranty: 5 years Pack quantity: 2 lamps (1 left + 1 right) twin blister Brand: LED Autolamps SKU: 284ARWM-2 Features & Benefits Sequential indicator: Dynamic sweeping amber LED indicator sequence provides dramatically improved road presence and visibility compared to standard on/off flash indicators Diffused tail function: Even, soft diffused tail light output delivers a premium, modern appearance with consistent illumination across the lamp face European-inspired exclusive design: The 284 Series "Zeon" design is an exclusive LED Autolamps shape unavailable from other brands, providing a distinctive, premium appearance Five functions in one unit: Stop, diffused tail, sequential indicator, reverse, and inbuilt reflector consolidated into a single slimline lamp 28cm cable: Pre-wired for straightforward installation Stainless steel bolt mount: Secure horizontal surface mount with stainless steel fittings for long-term corrosion resistance MFBKT bracket compatible: Works with the LED Autolamps MFBKT multi-fit bracket (sold separately) for tray vehicle applications ECE and EMC approved: Legal for Australian road use across all five functions with electromagnetic compatibility protection IP67 weatherproof: Completely sealed against dust and temporary water immersion 10–30V multivolt: Suits 12V passenger, caravan, and trailer applications through to 24V commercial trucks 5-year warranty: Backed by LED Autolamps' industry-standard warranty Technical Specs Specification Detail SKU 284ARWM-2 Brand LED Autolamps Series 284 Series (Zeon) Functions Stop, Diffused Tail, Sequential Indicator, Reverse, Reflector Voltage 10–30V DC (multivolt) Dimensions 284mm x 100mm x 37mm Cable Length 28cm Mount Type Horizontal surface mount rear bolts, 10mm hole Optional Bracket MFBKT (sold separately) IP Rating IP67 Compliance ECE Australian road approved, EMC protected Warranty 5 Years Pack Quantity 2 lamps (1 left + 1 right) twin blister Compatible With  Suits all 10–30V trailers, caravans, ute trays, and commercial vehicles including: 4WD tray and canopy builds Caravans and camper trailers Box trailers and light commercial trailers Small to medium trucks Frequently Asked Questions What makes the indicator on the 284ARWM-2 "sequential"? Rather than a standard on/off flash, the sequential indicator LEDs sweep outwards in a dynamic sequence a premium indicator style associated with high-end European vehicles. It provides significantly greater visual impact and road presence compared to standard indicators. How many lamps are in this pack? The 284ARWM-2 twin blister pack includes two lamps one left and one right for a complete matched rear lighting solution. Is the MFBKT bracket included? No the MFBKT multi-fit bracket is sold separately. It is compatible with the 284ARWM-2 for tray vehicle and bracket mount applications. How is the lamp installed? Surface mount horizontally using the bolts in the rear of the lamp. Run the wire and plug through a 10mm hole in the fixing surface. Refer to ADR 13/00 for mounting position and height requirements. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less