Right-Hand Sequential Indicator Combination Lamp 284 Series, Single Unit, 10–30V, ECE Approved. Product Overview The LED Autolamps 284ARWMRB is the right-hand side, single bulk unit version of the 284 Series (Zeon) sequential rear combination lamp delivering stop, diffused tail, sequential indicator, reverse, and inbuilt reflector functions in the proven 284mm x 100mm x 37mm Zeon form factor. The "RB" suffix denotes Right Hand Bulk a single lamp only, for applications where only one side needs replacement, or where a specific single-sided purchase is required. The sequential indicator sweeps outwards in a dynamic amber sequence rather than a standard on/off flash, consistent with the 284ARWM-2 twin blister pack listed earlier in this session. ECE approved for road use, the lamp features a bolt-on surface mount with stainless steel fittings and includes a 28cm pre-wired cable. Compatible with the optional MFBKT multi-fit bracket sold separately. Key Specifications Functions: Stop, tail (diffused), sequential indicator, reverse, reflector Voltage: 10–30V DC (multivolt) Orientation: Right hand side (RHS) Dimensions: 284mm x 100mm x 37mm Cable: 28cm pre-wired Mount: Horizontal surface mount stainless steel bolts, wire through 10mm hole IP rating: IP67 Compliance: ECE approved Warranty: 5 years Pack quantity: Single unit (bulk) Brand: LED Autolamps SKU: 284ARWMRB Features & Benefits Right-hand specific: RHS orientation for correct lamp placement on the right side of the vehicle or trailer Sequential indicator: Dynamic sweeping amber LED indicator sequence for premium visibility and road presence Diffused tail function: Even, soft diffused tail light output for a premium finished appearance Single unit (bulk): Individual lamp for single-side replacement or specific single-unit installation requirements 28cm pre-wired cable: Ready for direct installation Stainless steel bolt mount: Secure, corrosion-resistant surface mounting MFBKT compatible: Suits the LED Autolamps multi-fit bracket for tray vehicle installations (sold separately) ECE approved: Legal for Australian road use across all functions IP67 weatherproof: Completely sealed against dust and temporary water immersion 10–30V multivolt: Suits 12V and 24V systems 5-year warranty: Backed by LED Autolamps' 5-year warranty Technical Specs Specification Detail SKU 284ARWMRB Brand LED Autolamps Series 284 Series (Zeon) Functions Stop, Diffused Tail, Sequential Indicator, Reverse, Reflector Orientation Right Hand Side (RHS) Voltage 10–30V DC (multivolt) Dimensions 284mm x 100mm x 37mm Cable Length 28cm Mount Type Horizontal surface mount stainless steel bolts Mounting Hole 10mm for wire IP Rating IP67 Current Stop 0.18A @ 13.8V / 0.08A @ 28V Current Tail 0.14A @ 13.8V / 0.07A @ 28V Current Indicator 0.3A @ 13.8V / 0.15A @ 28V Current Reverse 0.14A @ 13.8V / 0.08A @ 28V Compliance ECE approved Warranty 5 Years Pack Quantity Single unit (bulk) Compatible With Suits all 10–30V trailers, caravans, ute trays, and commercial vehicles: 4WD tray and canopy builds Caravans and camper trailers Box trailers and light commercial trailers Small to medium trucks Frequently Asked Questions Is this a left or right-hand lamp? This is the right-hand side (RHS) lamp. For the left-hand side refer to the 284ARWMLB. For a matched left and right pair, refer to the 284ARWM-2 twin blister pack. What is the difference between the 284ARWMRB and the 284ARWM-2? The 284ARWM-2 is a matched left and right pair in a twin blister pack. The 284ARWMRB is the right-hand lamp only as a single bulk unit useful for single-side replacement. Is the MFBKT bracket included? No the MFBKT multi-fit bracket is sold separately. It is compatible with the 284ARWMRB for tray vehicle applications. What is the sequential indicator? The sequential indicator LEDs sweep outwards in a dynamic amber sequence rather than a standard on/off flash a premium indicator style for improved visibility and road presence. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

12V Slimline Stop/Tail/Indicator 16 LEDs, Black End Caps, ECE Approved, IP67, 285mm. Product Overview The LED Autolamps 285BAR12 is a 12V slimline stop/tail/indicator combination lamp from the 285 Series, featuring 16 LEDs, black end caps, and a surface mount design with 266mm centre-to-centre bolt spacing. The black end cap version the chrome equivalent in this function is the 285CAR12. Measuring just 285mm x 25mm x 10mm, the 285BAR12 delivers three rear lamp functions in one of the most compact strip lamp formats available for trailers, caravans, and light commercial vehicles. ECE approved (E9 7R02/27 6R01/28), IP67 rated, and with clearly specified current draw for each function, the 285BAR12 is a versatile slimline rear combination lamp with an 85mm cable. Backed by LED Autolamps' 5-year warranty and supplied as a single unit. Key Specifications Functions: Stop, tail, indicator LED count: 16 Lens material: Polycarbonate Base material: Polycarbonate End caps: Black clip-on Dimensions: 285mm x 25mm x 10mm Centre-to-centre mounting: 266mm Cable: 85mm Mount type: Surface mount horizontal or vertical IP rating: IP67 Input voltage: 12V only Current draw: Stop 0.24A / Tail 0.09A / Indicator 0.14A @ 13.8V ECE compliance: E9 7R02/27 6R01/28 Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: 285BAR12 Features & Benefits Three-function combination lamp: Stop, tail, and indicator in a single 285mm slimline unit, reducing lamp count and wiring complexity 16 LEDs: 16 LEDs across three functions deliver bright, clearly visible stop, tail, and indicator output Black end caps: Low-profile black clip-on end caps suit modern, dark-finish trailer and vehicle builds; chrome alternative is the 285CAR12 Polycarbonate lens and base: Durable, UV-resistant construction for long-term outdoor performance 266mm centre-to-centre mounting: Wide bolt spacing for stable, secure two-point installation ECE approved E9 7R02/27 6R01/28: Certified for legal stop, tail, and indicator use on Australian road vehicles and trailers IP67 weatherproof: Completely sealed against dust and temporary water immersion Horizontal and vertical mounting: Flexible orientation for diverse trailer and vehicle configurations 12V only: Direct 12V compatibility for trailers, caravans, and light commercial vehicles 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285BAR12 Brand LED Autolamps Series 285 Series Functions Stop, Tail, Indicator LED Count 16 Lens Material Polycarbonate Base Material Polycarbonate End Caps Black clip-on Dimensions 285mm x 25mm x 10mm Centre-to-Centre Mounting 266mm Cable Length 85mm Mount Type Surface mount horizontal or vertical IP Rating IP67 Input Voltage 12V only Current Draw Stop 0.24A @ 13.8V Current Draw Tail 0.09A @ 13.8V Current Draw Indicator 0.14A @ 13.8V ECE Compliance E9 7R02/27 6R01/28 Warranty 5 Years Packaging Single unit Compatible With Suits 12V trailers, caravans, and light commercial vehicles requiring slimline ECE-compliant stop/tail/indicator lighting including: Box trailers and light trailers Caravans and camper trailers Light commercial vehicles Frequently Asked Questions How many LEDs does the 285BAR12 contain? The 285BAR12 contains 16 LEDs distributed across the three stop, tail, and indicator functions. Is this lamp ECE approved for Australian road use? Yes the 285BAR12 is ECE approved under E9 7R02/27 6R01/28, confirming legal compliance for stop, tail, and indicator functions on Australian road vehicles and trailers. What is the current draw for each function? Stop: 0.24A, Tail: 0.09A, Indicator: 0.14A all at 13.8V. These are among the lowest current draw figures for a 3-function combination lamp, reflecting the efficiency of the 285 Series LED strip design. Is there a chrome end cap version of this lamp? Yes the 285CAR12 is the chrome end cap version of the same stop/tail/indicator function. Choose based on your preferred aesthetic. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

24V Slimline Front Indicator & Park Light Chrome Bezel, 285mm, ECE/ADR Approved, IP67. Product Overview The LED Autolamps 285CAW24 is a 24V slimline front direction indicator and front position (park) lamp from the 285 Series the 24V variant of the 285CAW range, designed for commercial trucks, buses, and 24V vehicle applications requiring a low-profile front indicator and park light solution. Measuring 285mm x 25mm x 10mm, the 285 Series is one of the most space-efficient front lamp formats available, with a screw mount system and clip-on chrome end caps that conceal all fasteners for a clean, professional appearance. ECE and ADR approved, IP67 rated for complete dust and water protection, and capable of both horizontal and vertical mounting, the 285CAW24 is a versatile front lamp solution suited to a wide range of commercial vehicle body configurations. Backed by LED Autolamps' 5-year warranty and supplied as a single unit in blister packaging. Key Specifications Functions: Front direction indicator + front position (park) lamp Bezel: Chrome with clip-on caps Dimensions: 285mm x 25mm x 10mm Mount type: Screw mount clip-on chrome caps conceal screws Mount orientation: Horizontal and vertical Voltage: 24V (confirmed by SKU and title see voltage note above) IP rating: IP67 Compliance: ECE and ADR approved Warranty: 5 years Packaging: Blister pack single unit Brand: LED Autolamps SKU: 285CAW24 Features & Benefits Front direction indicator and park lamp: Dual function in a single slimline unit amber indicator output and white/amber park position lamp in one 285mm body Chrome bezel with clip-on end caps: Screw mount fasteners concealed beneath clip-on chrome end caps for a clean, professional finished appearance Slimline 285mm x 25mm x 10mm: Ultra-compact form factor suited to tight front panel and cab corner mounting locations on commercial trucks and vehicles Horizontal and vertical mounting: Flexible mounting orientation accommodates a wide range of vehicle body configurations ECE and ADR approved: Certified for legal use as a front direction indicator and park lamp on Australian road vehicles IP67 weatherproof: Completely sealed against dust ingress and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 285CAW24 Brand LED Autolamps Series 285 Series Functions Front Direction Indicator + Front Position Lamp Bezel Chrome clip-on end caps Dimensions 285mm x 25mm x 10mm Mount Type Screw mount clip-on caps Mount Orientation Horizontal and vertical Voltage 24V (confirm with supplier) IP Rating IP67 Compliance ECE and ADR approved Warranty 5 Years Packaging Blister Pack single unit Compatible With Suits 24V commercial trucks, buses, and vehicles requiring slimline ECE/ADR front indicator and park lamps including: Heavy commercial trucks and prime movers Buses and coaches Commercial vans and 24V light commercial vehicles Frequently Asked Questions Is this lamp 12V or 24V? The SKU (285CAW24) and the product title both state 24V. The supplier features list states "12 Volt" this appears to be a data carry-over error from the 12V equivalent (285CAW12). Always confirm the voltage specification with your supplier before purchasing. What functions does this lamp provide? The 285CAW24 provides two functions front direction indicator (amber flashing) and front position/park lamp (white or amber steady) in a single slimline 285mm unit. How are the screws hidden? The 285 Series uses a screw mount system with clip-on chrome end caps. After mounting with screws, the chrome end caps clip over the screw positions, concealing all fasteners for a clean finished appearance. Can this lamp be mounted vertically and horizontally? Yes the 285CAW24 supports both horizontal and vertical mounting orientations, providing flexibility for different vehicle body configurations. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Always confirm voltage specification before purchasing. Contact the seller if you're unsure prior to purchase. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

Amber LED Side Direction Indicator Black Base, Amber Lens, ADR Approved, 10–30V, Clip-In Lens. Product Overview The LED Autolamps 35AMB is an amber LED side direction indicator from the 35 Series, featuring a black base bracket, amber lens, amber LEDs, and 30cm pre-wired cable. The "B" suffix denotes the black base variant the chrome bracket equivalent is the 35AM. Sharing the proven 58mm x 35mm x 21mm form factor of the entire 35 Series range, the 35AMB provides ADR-compliant amber side direction indicator output across a broad 10–30V voltage range. Surface mount bracket installation run wires through the back and clip the amber lens into place. ADR approved, IP67 rated, and backed by LED Autolamps' 5-year warranty. Supplied as a single unit. Key Specifications Function: Amber side direction indicator LED colour: Amber Lens: Amber clip-in replaceable Bracket colour: Black Dimensions: 58mm x 35mm x 21mm Cable: 30cm pre-wired Mount type: Surface mount clip-in lens IP rating: IP67 Input voltage: 10–30V DC (multivolt) Current draw: 0.10A @ 13.8V Compliance: ADR approved Warranty: 5 years Packaging: Single unit Brand: LED Autolamps SKU: 35AMB Features & Benefits Amber side direction indicator: Dedicated amber indicator function providing clear, bright directional signal output through an amber lens Black base bracket: Black bracket suits modern trailer builds; chrome bracket alternative is the 35AM Amber lens and amber LEDs: Full amber output with no colour dilution for maximum indicator visibility Clip-in replaceable lens: Amber lens clips in and out without removing the bracket for easy maintenance 30cm pre-wired cable: Sufficient cable length for most mounting locations 10–30V multivolt: Broad voltage range covering 12V and 24V systems ADR approved: Legal for amber side direction indicator use on Australian road vehicles IP67 weatherproof: Completely sealed against dust and temporary water immersion 5-year warranty: Backed by LED Autolamps' industry-standard 5-year warranty Technical Specs Specification Detail SKU 35AMB Brand LED Autolamps Series 35 Series Function Amber Side Direction Indicator LED Colour Amber Lens Amber clip-in replaceable Bracket Colour Black Dimensions 58mm x 35mm x 21mm Cable Length 30cm Mount Type Surface mount clip-in lens IP Rating IP67 Input Voltage 10–30V DC (multivolt) Current Draw 0.10A @ 13.8V Compliance ADR approved Warranty 5 Years Packaging Single unit Compatible With Universal suits all 10–30V trailers, caravans, and commercial vehicles requiring amber ADR-compliant side direction indicators including: Box trailers, car trailers, and boat trailers Caravans and camper trailers Light and heavy commercial trucks Agricultural and construction trailers Frequently Asked Questions What is the difference between the 35AMB and the 35AM? The 35AMB has a black base bracket while the 35AM has a chrome bracket. Both are otherwise identical in function, lens colour, dimensions, and compliance. Choose based on your preferred bracket colour. Is this lamp ADR approved for Australian road use? Yes the 35AMB is ADR approved for amber side direction indicator use on Australian road vehicles and trailers. What is the lens colour on this lamp? The 35AMB has an amber lens with amber LEDs providing fully saturated amber indicator output without a clear lens. This differs from clear-lens designs which rely solely on LED colour. Can the lens be replaced without removing the bracket? Yes the clip-in lens design allows lens removal and replacement without removing the bracket from the mounting surface. What is the return policy for this product? Return eligibility is subject to the retailer's policy. Contact the seller before ordering if you have any questions. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR 48/00 Approved 12/24V Licence Plate Lamp 1m Cable with 2-Pin Plug, CTA060024 Product Overview The LED Autolamps 35BLM1P is a 12/24V ADR-approved licence plate lamp in the same 76mm x 42mm x 30mm black bracket housing as the 35BLM, with a 1-metre cable fitted with a 2-pin plug for easy connection. Certified under ADR 48/00 (CTA060024), drawing just 0.02A at 13.8V, one lamp satisfies ADR compliance requirements. White LED output, IP67 rated, and backed by a 5-year warranty. Features & Benefits 1m cable with 2-pin plug — the extended cable and plug connector allow for tool-free connection to compatible trailer wiring without cutting or splicing White LED output — bright, clear white illumination of the number plate Black bracket — clean finish suits a wide range of trailer and vehicle rear panel aesthetics One lamp required for ADR compliance — a single 35BLM1P satisfies ADR 48/00 requirements ADR 48/00 approved — certified under CTA060024 for legal on-road use as a licence plate lamp IP67 rated — fully sealed against dust and water immersion Ultra-low current draw — 0.02A at 13.8V 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 35BLM1P Lamp Type Licence Plate Light LED Colour White Housing Colour Black Voltage Range 12V / 24V Dimensions 76mm x 42mm x 30mm Mount Centre-to-Centre 64mm Current Draw 0.02A @ 13.8V Cable Length 1m Connector 2-pin plug Mounting Surface mount Protection Rating IP67 Compliance ADR 48/00 — CTA060024 ADR Note One lamp required for compliance Packaging Polybag Warranty 5 years Compatible With / Goes Well With Trailers and vehicles requiring ADR-compliant licence plate lighting with plug-and-play connection 12V light vehicles and 24V heavy transport applications LED Autolamps 35BLM (same lamp, 40cm bare wire, blister pack) LED Autolamps 35BLMB (same lamp, 40cm bare wire, bulk) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions How many 35BLM1P lamps are required for ADR compliance? One lamp is required to meet ADR 48/00 compliance — a single 35BLM1P provides a fully compliant number plate light installation. What is the advantage of the 2-pin plug connector? The 2-pin plug allows the lamp to connect directly to compatible trailer wiring without cutting or splicing — faster installation and cleaner wiring compared to bare wire variants. How does the 35BLM1P differ from the 35BLM? The 35BLM1P has a 1m cable with a 2-pin plug and comes in a polybag, while the 35BLM has a 40cm bare wire in a blister pack. Both are the same 76mm x 42mm black bracket lamp with ADR CTA060024 approval and 5-year warranty. What is the IP rating on the 35BLM1P? The 35BLM1P is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 35BLM1P carry? The 35BLM1P is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

SMD LED Technology, Delivering A Powerful Spread of Light! High-Powered LED Interior Strip Lamp The Narva 87532 High-Powered LED Interior Strip Lamp features an in-built Off/On switch and the latest SMD LED technology, delivering a powerful spread of light. The high-powered strip lamp is constructed with a robust aluminium housing and an impact-resistant design.Features: High-powered LED interior strip lamp features an in-built Off/On switch and the latest SMD. LED technology delivers a powerful spread of light. The high-powered strip lamp is constructed with a robust aluminium housing and an impact-resistant design. Specifications: Type: LED Interior Lamp Size: 282mm Input Voltage Range: 12V Current Draw: 0.34A @ 12V   Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today! Dimensions: 282mm x 34mm x 13mm Weight: 0.12kg Legendary Products & Support From Authorized Dealers When you choose NARVA, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & Training Only authorized NARVA dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty Protection: We offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don't be misled by unauthorized sellers who can't provide genuine warranty support. ▸ Reliable Customer Support: If you ever run into an issue, you're backed by NARVA's official manufacturer's warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your Investment: Buying from an authorized dealer ensures you're getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few dollars worth losing all that? Choose wisely. Buy from an authorized NARVA dealer today!

Read more less

ADR Approved 12/24V Green Courtesy Lamp 4 Green LEDs, 58x35mm, Surface Mount, IP67 Product Overview The LED Autolamps 35GM is a 12/24V green courtesy lamp with 4 green LEDs in the compact 58mm x 35mm x 21mm surface-mount housing. Sharing the same form factor as the 35CWM front marker and the 58 series, it delivers green output for courtesy and specialised marker applications requiring a green lamp. ADR road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits 4 green LEDs — delivers correct green output for courtesy lamp and specialised marker applications Compact 58mm x 35mm form factor — low-profile surface mount suits vehicle body panels and courtesy light positions ADR road approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 35GM Lamp Type Courtesy / Side Marker LED Quantity 4 LED Colour Green Lens Colour Green Voltage Range 12V / 24V Length 58mm Width 35mm Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Vehicles requiring green courtesy or specialised marker lamps 12V and 24V vehicle electrical systems LED Autolamps 35CWM front white marker (same 58x35mm form factor) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 35GM approved for road use in Australia? Yes. The LED Autolamps 35GM is ADR road approved, meeting Australian Design Rules requirements for legal on-road use. What is a courtesy lamp used for? A courtesy lamp is a supplementary lamp used to mark or illuminate specific areas of a vehicle. The green output of the 35GM suits specialised marker applications where green is specified. What regulations apply to green lights on vehicles in Australia? Green lights on vehicles are regulated in Australia. Always confirm that the intended application and fitting position complies with relevant state or territory road rules before installing. What is the IP rating on the 35GM? The 35GM is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 35GM carry? The 35GM is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ADR Approved 12V Stop/Tail LED Strip in Chrome Bracket 404x46x17mm, IP67, 5-Year Warranty Product Overview The LED Autolamps 380CR12 is a 12V stop/tail LED strip light in a chrome surface mount bracket, measuring 404mm x 46mm x 17mm in the 380 series slimline form factor. The chrome bracket gives it a premium finish suited to caravans, custom trailers, and vehicle rear panels where a polished appearance is preferred over standard black. ADR road approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Chrome bracket — premium polished finish for caravans, custom trailers, and premium vehicle rear panel installations Stop and tail functions — two rear lighting functions in a single 380 series slimline strip Low-profile 17mm depth — ultra-slim strip sits close to the panel surface for a clean finish Surface mount — straightforward installation on trailer and vehicle rear panels ADR road approved — meets Australian Design Rules for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 380CR12 Lamp Type Stop / Tail Strip Voltage 12V Dimensions 404mm x 46mm x 17mm Bracket Chrome surface mount Mounting Surface mount Protection Rating IP67 Compliance ADR Warranty 5 years Compatible With / Goes Well With Caravans, custom trailers, and commercial vehicles requiring a chrome-finish stop/tail strip lamp 12V trailer and vehicle electrical systems LED Autolamps 380BBSTI12 slimline stop/tail/indicator strip (same 404mm form factor) LED Autolamps 380B1C chrome bracket (same chrome bracket accessory) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 380CR12 approved for road use in Australia? Yes. The LED Autolamps 380CR12 is ADR road approved, meeting Australian Design Rules requirements for legal on-road use as a stop/tail lamp. How does the 380CR12 differ from the 380BBSTI12? The 380BBSTI12 is a three-function stop/tail/indicator strip in a standard bracket, while the 380CR12 covers stop and tail only in a chrome bracket. Choose the 380CR12 where a chrome finish and simplified stop/tail function are preferred. What is the advantage of the chrome bracket? The chrome bracket delivers a premium polished appearance compared to standard black brackets — well suited to caravans, boat trailers, and custom builds where the lamp finish contributes to the overall aesthetic. What is the IP rating on the 380CR12? The 380CR12 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 380CR12 carry? The 380CR12 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved 12V Stop/Tail Strip Lamp 18 Square LEDs, Ultra-Slim 3mm, Recessed or Surface Mount Product Overview The LED Autolamps 380R12 is a 12V stop/tail strip lamp with 18 square LEDs in a 382mm x 25mm x 3mm ultra-slim housing, designed for flush recessed mounting with optional surface mount brackets available. ECE approved, it rounds out the 380 strip lamp series as the stop/tail counterpart to the 380A12 indicator and 380W12 reverse strips all sharing the same 382mm x 25mm x 3mm form factor. IP67 rated and backed by a 5-year warranty. Features & Benefits 18 square LEDs — distinctive square LED array delivers strong, consistent red stop/tail output across the 382mm strip face Ultra-slim 3mm depth — flush recessed mount for a clean, integrated finish Recessed fitting — primary mount for a flush finish; optional surface mount brackets available 382mm length — matches the 380A12 and 380W12 for a consistent matched rear lighting set ECE approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12V only — designed for 12V trailer and vehicle electrical systems 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 380R12 Lamp Type Stop / Tail Strip LED Quantity 18 square LED Colour Red Voltage 12V Dimensions 382mm x 25mm x 3mm Mounting Recessed (surface mount brackets available) Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Trailers, caravans, and commercial vehicles requiring a wider-format flush-mount stop/tail strip lamp 12V trailer and vehicle electrical systems LED Autolamps 380A12 indicator strip (same 382mm form factor — matched set) LED Autolamps 380W12 reverse strip (same 382mm form factor — matched set) LED Autolamps surface mount bracket accessories (confirm availability with F.A.E.) LED Autolamps 235R12 stop/tail strip (same concept, shorter 237mm format) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 380R12 approved for road use in Australia? Yes. The 380R12 is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia. How does the 380R12 complete the 380 strip series? The 380R12 is the stop/tail strip, joining the 380A12 (indicator) and 380W12 (reverse) — all sharing the same 382mm x 25mm x 3mm ultra-slim recessed form factor with 18 square LEDs for a fully matched rear lighting set. Can the 380R12 be surface mounted? Yes. While primarily designed for recessed fitting, optional surface mount brackets are available to suit installations where recessed fitting is not possible. Confirm compatible bracket accessories with F.A.E. What is the IP rating on the 380R12? The 380R12 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion. What warranty does the 380R12 carry? The 380R12 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less

ECE Approved Stop/Tail/Indicator/Reverse Twin Pack 5-Circle Chrome Tinted Lens, Diffused Tail, IP67 Product Overview The LED Autolamps 3851ARWM-2 is the chrome tinted lens variant of the 3851 series rear combination lamp supplied as a twin pack covering stop, tail, indicator, and reverse functions with the same distinctive 5-circle lens design at 387mm x 105mm x 30.5mm. The chrome tinted lens delivers a mirrored, smoked appearance when inactive a premium aesthetic suited to caravans, custom trailers, and show builds. ECE approved, IP67 rated, and backed by a 5-year warranty. Features & Benefits Chrome tinted lens — mirrored smoked appearance when inactive for a premium, distinctive aesthetic Twin pack — both lamps supplied for a complete left and right rear installation 5-circle LED cluster design — five-circle lens pattern for a recognisable, premium rear lighting appearance Diffused tail function — smooth, even tail light output across the tinted lens face Stop, tail, indicator, and reverse — four rear lighting functions in a single unit ECE approved — meets international road approval standards for legal on-road use IP67 rated — fully sealed against dust and water immersion 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport 5-year warranty — backed by LED Autolamps' full warranty programme Technical Specs Specification Detail SKU 3851ARWM-2 Pack Contents 2 lamps Lamp Type Stop / Tail / Indicator / Reverse Tail Function Diffused Lens 5-circle, chrome tinted Voltage Range 12V / 24V Dimensions 387mm x 105mm x 30.5mm Mounting Surface mount Protection Rating IP67 Compliance ECE Warranty 5 years Compatible With / Goes Well With Caravans, trailers, and custom vehicle builds requiring premium chrome tinted rear combination lamps 12V light vehicles and 24V heavy transport applications LED Autolamps 3851ARWMLCSB LHS black tinted lens variant (same 5-circle series) LED Autolamps wiring harnesses and trailer lighting accessories Frequently Asked Questions Is the 3851ARWM-2 approved for road use in Australia? Yes. The 3851ARWM-2 is ECE approved, meeting international road approval standards accepted for legal on-road use in Australia. How does the 3851ARWM-2 differ from the 3851ARWMLCSB? The 3851ARWM-2 is a twin pack with a chrome tinted lens, while the 3851ARWMLCSB is a single LHS lamp with a black tinted lens. Both share the same 5-circle 387mm x 105mm form factor, ECE approval, and diffused tail function. What does the chrome tinted lens look like? The chrome tinted lens gives the lamp a mirrored, smoked appearance when inactive — reflecting the surroundings like a one-way mirror. When energised, each function shows through the tinted surface in the appropriate colour. Is the 3851ARWM-2 supplied as a left and right pair? Yes. The twin pack supplies both lamps for a complete left and right installation. What warranty does the 3851ARWM-2 carry? The 3851ARWM-2 is backed by a 5-year warranty from LED Autolamps. Legendary Products & Support From Authorized Dealers When you choose Frankies BrandBeast, you're choosing quality and performance. But just as important as what you buy is where you buy it from. Here's why purchasing from an authorized dealer is always the right choice: ▸ Expert Knowledge & TrainingOnly authorized Frankies BrandBeast dealers are factory-trained to sell and install our products. They have the expertise to ensure your purchase is set up correctly and meets your expectations. ▸ Authorized Warranty ProtectionWe offer one of the best warranties in the industry, but only purchases made through authorized dealers are covered. Don’t be misled by unauthorized sellers who can’t provide genuine warranty support. ▸ Reliable Customer SupportIf you ever run into an issue, you’re backed by Frankies BrandBeast’s official manufacturer’s warranty. No need to deal with overseas returns—our local team takes care of everything quickly and efficiently. ▸ Protect Your InvestmentBuying from an authorized dealer ensures you’re getting genuine products, full warranty coverage, and expert support. Ask yourself—is saving a few bucks worth losing all that? Choose wisely. Buy from Frankies BrandBeast today!

Read more less